Pune University Tender

Providing and fixing in position glass door (1000x2400) or any other specified / required size of 12mm thick toughened glass of Modigaurd or equivalent alongwith the holes required for fising fittings, including floor hinges of ozone or equivalent, top/bottom patch fitting, patch lock and top pivot fitting including scrapping for fixing the floor hinge, cleaning , including application of froasted films as per pattern given by architect etc complete,

Providing Glass in Partiotion of 12 mm thick with D brackets

Wooden Partitions Part height - Providing & Fixing in position 3" thk. wooden partition, including 2"x2" Salwood frame work and covering with 6mm. ply & 1.0 mm. thk laminate on both sides/ 3 mm thk MDF, insertion of T.W. member whereever necessary, cutting of holes to partition, provision for electrical conduits, 6mm. ply for skirting with 1.0 mm. laminate covering of approved colour & shade, providing additional angle supports wherever necessary for standalone partitions and additional strengthening wherever necessary, including luster paint of approved shade if MDF is applied wherever / all over as applicable etc item complete.

Providing and fixing wall panelling made out of 19 mm ply box finished with 1.0 mm thk laminate amd 6 mm think lipping on exposed sides as per instructions including making holes, finsing arrangements, making provisions required for lighting , polishing the exposed edages, cleaing etc complete

Toughened glass partition works: The scope of work includes Providing, supplying, fabrication and installation or fixing of toughened glass (10-12m thick) to the various locations with the accessories like powder coated aluminium fish mouth channel at top & bottom, labour, distance between two glass panels not exceed 2mm to 4mm, sealing of gap filling (wall to glass magnetic seals, glass to glass central weather seals etc clear PU sealant or silicon), etc. (at all level/floors/height) which are necessary for completion of job as directed by engineer in charge.

Providing & Fixing in position, FR grade Fabric wrapped Compressed polyester fibre nonwoven 9mm panels above the wood wool board paneling or existing sal wood frame, using adhesive, as per Architectural & Acoustical Design & Instructions & Complete in all aspects as directed by the engineer in charge.

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed toreinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item tobe completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Providing & Fixing of Armstrong Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% (GW) and 74 % RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T-section flanges colour white having rotary stitching on all T-sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and aload carrying capacity of 7 Kilograms/M2 with aminimum pullout trength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 1 year warranty. products approved as per GRIHA and BS 476 etc. complete.

Providing & Fixing of Armstrong Soft Fibre suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% (GW) and 74 % RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T-section flanges colour white having rotary stitching on all T-sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and aload carrying capacity of 7 Kilograms/M2 with aminimum pullout trength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 1 year warranty. products approved as per GRIHA and BS 476 etc. complete.

Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete.

Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595mm x 595mm having 15mm thick densified micro look edge and 100% humidity resistance incombustible as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600mm made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42mmx14mm between main tee 600mm center-tocenter and secondary cross T of size 33x14x0.43mm thick of length 600mm long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200mmx600mm resting on periphery wall Profile wall section 19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of required length fixed to the ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I. adjustable rods with powder- coated/good quality G.I. level adjustment clips of 35x35x0.8mm spaced @1200, center-to- center along main T all complete at all heights as per the specifications, drawings and as per

Providing & Fixing Soild core hot pressed , phenol formaldehyde bonded boiling proof 40mm thick marine plywood door frame Citicom 710 / Green Club 500 / CPL 710 or equivalent make on both side gypsum face, seasoned calibrated & chemically treated as per IS 710 standard one side laminate of approved colour shade & design and width i/c fixing as per manufactures specification all and Hilti fastner 100mm long 10 nos each side embedded in masonry including 75x12 mm marineply cover mould with teak wood lipping on both sides etc. complete as per direction of Engineer in Charge. Size = 300mm x 40 mm

Providing & fixing solid core flush door in single / double leaf 35mm thick decorative type of exterior grade as per detailed drawing & design including approved mica face on both face (1.0mm thick), fittings, Brass oxidised fixtures (Aldrops, Handles, Tower bolts, Hinges) of approved make and size as specified in the drawing including all necessary beads, moulding, lipping, french polish etc. complete. (without door frame). Spec. No. BD.T.34 Page No. 499.

Providing and fixing solid core Flush door shutter in single leaf 32 mm thick decorative type of exterior grade of approved face veneers 4 mm thick on both faces or as directed, including all necessary beads, mouldings and lipping, S.S.hinges, chromium plated fixtures and fastenings,handles on both sides finishing with Melamine Polish as per detailed Architectural Disign & Drawings etc. Complete in all aspects. Specification No: As directed by engineer in charge

Providing and fixing in position 30mm. Thick solid commercial flush door shutters, single/double shuttered, waterproof & termite proof as per Indian standard specification (Century ply make) including providing 30 X 20mm. T.W. lipping all around and both side 1mm thick laminate (Century / Greeenlam make) with three coats of fresh polish of approved color on top & vertical thickness, for bottom thickness with one coat of primer and two coats of approved satin paint (Asian / ICI make), all shutters tested for smooth easy operation etc. all as per architectural drawings & details etc. complete. Actual flush door size will be paid (The rate is including all hardware schedule as per each type) Hinges - 4 Nos. Handle A - 2 Nos. Aldrop - 1 No. Tadipatti - 1 No. Towerbolt - 1 No. Doormagnet - 1 No. PVC - Stopper - 1 No. Hardware Schedule Hinges - 100mm long ( 4 x 12mm ) S.S. Hinges , Handle A - 200mm long and 19mm thick SS Handles , Handle B - 150mm long and 19mm thick SS Handles ,Aldrop - 250mm long & 12mm dia.S.S. Aldrop, Tadipatti - 200mm long & 12mm dia. S.S.Tadipatti of Baby latch - S.S Baby latch ,Tower bolt - 200mm long S.S.Tower bolt 200 x 10mm Doormagnet - S.S. Door magnet ,PVC - Stopper - PVC door Stopper ,72 mm bell type. Spec. As directed by Engineer in charge. Make for hardware fittings - Super Suzu/hittech/hafele/godrej/ EBCO/Fitji/Kich /Plus point make

Providing & fixing Internal Door drop down seal (Automatic Internal drop down seal) including all necessary fitting etc. complete. from CCE, Italy and Raven, Australia make or equivalent As directed by Engineer in Charge. (As per drawing & Specification attached on annexture I)

Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. Door closer (Hyper). Spec. As directed by Engineer in charge.

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc. complete. Spec. As directed by Engineer in charge.

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller..

Providing and applying two coats of APEX exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.NOTE: For Item No. 15 to 18

Providing and applying 2 coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) complete.Spec. No.: Bd.0.7 Page No. 406

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

Providing and applying pearl / luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. & including the priming coat on concrete / masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface including the priming coat on concrete / masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required & including two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Providing and making Holes (Core cutting ) in chajjas and slab for passing the pipe line. Spec. No: - As directed by Engineer in charge

Vanishing BLINDS P& F Vanishing blinds as approved by the University with 100% opacity with necessary fixing and operating arrangement - (Sample to be final by Engineer In-charge prior execution of work)

Material Shifting by truck Spec. No: - As directed by Engineer in charge

Roller BLINDS P& F roller blinds of Vista Levolor / MAC or equivalent make as approved by the University with 100% opacity with necessary fixing and operating arrangement (Sample to be final by Engineer In-charge prior execution of work)

Providing and Fixing Rollar Blinds AMI or equivalent make or approved make as approved by the University & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)

Providing & fixing in position Fabric Curtains for Windows as approved by the University including stitching & track etc. Complete. Spec.: As directed by engineer in charge (Sample to be final by Engineer In-charge prior execution of work)

Providing & fixing Student Benches, DD-30 IM- Overall Dimentions:- L:-1054 X W980 X 760 mm Ht. Knock down class room dual desk is specially designed for rugged use. all edges are fillet. The desk are made of pressed formed MS CRCA section & CRCA tube fitted with Plywood with lamination on both sides and 2mm PVC Edgebanding top, seat & back with injection molded PPCP edge. Hanger for water bottle and bag. Space for keeping pen, pencil and scale. The overall appearance of the product shall be as per photograph.Top- Injection molded PPCP edge. Size :- 1054x450x18 MM thk. Particle Board.Seat- Injection molded PPCP edge. Seat height :- 450 MM , Seat size :- 1054x304x18 MM Thk. Particle board.Back- Injection molded PPCP edge. Back size :- 1054x154x18 MM Thk. Particle board. Shelf- Shelf 0.8 MM Thk. CRCA sheet. Bullnose front edge with stiffner 1 MM Thk CRCA. Modesty- Modesty 0.8 MM Thk. CRCA sheet. Square perforation.Tie members- Horizontal Tie members 25x25x1.6 MM thk. CRCA Pipe. For rigid joint of frame structure threaded 4 mm thick sleeve welded in tie members. Round pipe & Tie members joined together via notching in square pipe for matching of profile on round & square pipe in Seat & Back.Footrest- Footrest pressed formed CRCA section 1.5 MM Thk.Side frame- Side frame C - section pressed formed 1 mm thk.CRCA Sheet welded with 25x50x1.2 MM thk tube. And back rest pipe Ø25 x 1.6 MM thk. Back rest upper mouth has been closed with welded metal cap for avoiding sharp edges.Cap & Levellers- All pipe caps are curved PPCP material. Provision for levellers in the cape.4 nos of PVC Grommet has been provided at bottom for preventing scratches on floor & Product as well.Construction- The product comes in knock-down conditional for ease of transportation.Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.

CHAIRS - type 1 for HOD and heads Godrej Ace full back with headrest SEAT/BACK ASSEMBLY: The Cushioned seat assembly consshould be ts of seat outer (material-30% Glass Fiber Nylon)& upholstered Seat inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric. The Net Back should be made up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material- PP) and upholstered using Polyester Mesh fabric with high tenacity yarn. Full Back Size: 46.5 cm. (W) x 60.0 cm. (H) Seat Size : 51.0 cm. (W) x 49.0 cm. (D)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density = 45 +/- 2 kg/m³ and Hardness load 12 +/- 2 kgf for 25% compression. BACK SPINE: The support spine should be made up of High Pressure Die cast polished hed Aluminum.ARMRESTS : The armrest should be having two adjustment, Height (6.0±0.5cm) and Depth (6.0±0.5cm). Height adjustment should be provided in Aluminum structure of armrest which should be connected to Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be fixed to armrest structure. Armrest Top should be made up of PU molded over plastic inner.ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features:• 360° revolving type• Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort• Tilt tension adjustment can be operated in seating position• 5 position Tilt limiter giving option of variable tilt angle to the chair• Seat / back tilting ratio of 1:2• The mechanism housing should be made up of HPDC Aluminum & black powder coated (DFT 40 to 60 micron)SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 3.75±0.1 cmLUMBAR SUPPORT ASSEMBLY: The Lumbar support assembly should consist of lumbar spine (material-Glass Fiber Filled Nylon) which should be fixed to Aluminum Back spine. The Lumbar pad (material- Poly Propylene) should be fixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustment of 5.0±0.5cm.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm.PEDESTAL ASSEMBLY WITH CASTORS:The pedestal should be High Pressure Die cast polished Aluminum and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)Headrest :The neckrest assembly consshould be ts of upholstered Neckrest inner(material-PolyPropylene) with moulded Polyurethane foam and Polyster fabric.Upholstered inner should be fixed to Neckrest cover.Neckrest should be fixed to Back assembly through Neckrest spine .Neckrest assembly has height adjustment of 5.5 +/- 0.5cm and Rotation adjustment of overall 20° +/- 2°.TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter.Overall Dimensions of ChairSeat Height - min 45.5 to max 55.5cm.Height - min 95.5 to max 105.5 cm.Width & Depth of Chair as measured from pedestal - Width-75.0 cm and Depth-75.0 cm

Supply of CHAIRS - type 2 for faculty and dicussion rooms - Godrej Oxbo high back SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam.SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns)tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm (W) x 70.5 cm (H).HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should be designed with the following features:• 360° revolving type.• 17° ±2° maximum tilt on pivot at centre • Upright position locking. Tilt tension adjustment. .PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm.TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene.PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.)TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon.Overall Dimensions of ChairSeat Height - min 43.3 to max 54.3cm.Height - min 99.5 to max 110.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

Executive High Back Chair :- Supply of High Back Revolving Chair with Syanchro knee tilt mechanisum with Multiangle Locking System attached head rest to mesh nylon Frame back with 45 Density moulded foam netted tepestery Class 4 Gas Lift with Alluminium dia cast base and nylon twin Wheels. as approved by the University As directed by Engineer in Charge. (As per drawing & Specification attached on annexture I)

Faculty Chair :- Supply of netted high back revolving chair, with gaslift & crome plated base with twin nylon casters, netted back with adjustable lumber support & adjustable head rest, back made up of nylon frame with nylon mesh support, with 32 density P U foam. seat is made up of 15 mm thick hot press ply with 50 density moulded foam covered with high quality nylon mesh with aster, metal adjustable handles with P U pad fitted to seat with inserts, tilting mechanisum with multiangle locking system fitted to seat with inserts.

Computer Chair :- Supply of low back revolving chair with gaslift & crome platted base with nylon twin casters, 50 density moulded foam with fabric netted tapestry at seat & 15 mm Hot press ply for seat. High quality nylon mesh with nylon frame at back, pp handles, push back mechanism with fornt locking system. As directed by Engineer in Charge. (As per drawing & Specification attached on annexture I)

Staff Chair :- Supply of medium back revolving chair, with gas lift, crome platted base with nylon twin casters, Tilting/push back mechanism with front locking system, nylon streep (Horizontal Lines) type frame with high quality nylon mesh at back moulded 50 density foam seat with fabric/leatherite uphostery at seat 15 mm hot press ply at seat with inserts for handle & mechanisum, tringle type pp handle As directed by Engineer in Charge. (As per drawing & Specification attached on annexture I)

Visitors Chair :- Same as above, but with fixed legs and without castors as approved by the University

Visitors (Ornet) Chair :- Supply of supreme/cello make plastic moulded chair with seat & back cushion with velvet cloth, lacquer finished frame gross weight of chair 4 KG 200 GM. as approved by the University

Airport Multi Seater (3 Seater) Perforated Chairs/Sofa :- Supply of three seater CRCA sofa with crome plated handles & legs, crome plated side patti for fitting of seat & back, seat & back made up from 1.6 mm thick CRCA sheet duly silky silver powder coated, 76 mm x 38 mm x 1.25 mm thick powder coated center square pipe fitted to arms, legs & seating shell perforated hole size is 4 mm used for seating shell, approx weight is 32 KG +/- 2 % lenth is 1800 mm handle to handle, height from ground to top of back is 790 mm, height from ground to seat at front side 350 mm, height of ground to handle is 560 mm, depth from front to back of shell is 625 mm, crome plated adjuster are fitted to legs with rubber bush, inside shells are fitted to main frame with one angular bracket & crome nuts etc. complete as per drawing and as diretcted by engineer in charge.

Airport multi seater (3 seater)- Supply of three seater Over all sizes- 1765mm X 710mm X 775mm (L X W X H). 3- Seater visitor bench with 3 individual seats of 450 mm. width.Made of MS cold rolled close annealed press formed Sheet components duly seamless welded to get proper finish. Steel perforated MS moulded one piece seat and back fitted in moulded chrome plated side strips. three individual seats fitted on MS tube support of 75mm x 35mm. seat and bottom support are Powder coated. The open- ends of the pipes will be covered& finished. All joints will be properly welded & finished. The whole structure including seats are powder- coated.

Reception Table:- Providing & fixing of Table (2400mm X 800mm X 750 mm) & (1400mm X 600mm X 750 mm) or any other specified / required size using plywood, Teakwood bidding/lipping Patti with Veneer & melamine finish from bothside or required 1mm Laminate, with top 6mm Glass toughened glass and 12mm Vertical Glass toughened glass in front & Side portion, drawers and 2 openable shutters with storage made out of 19 mm ply. keyboard drawer and foot rest made out of 19 mm ply as per detailed Design & Drawings etc. Complete in all aspects. (Refer detailed drawing & design) Specification No: As directed by engineer in charge. (mode of measurement as per Top Portion)

Providing & fixing of Table (2100mm X 900mm X 750 mm) or any other specified / required size with necessary supporting system , top with 25mm.plywood edges thicked with another 75 wide 18mm. covered with laminate 1.0mm of approved colour and necessary provision to fix switches & power point as directed on site etc. Each side table will have drawers and 2 openable shutters made out of 19 mm ply. Each main table will have a keyboard drawer and foot rest made out of 19 mm ply. (mode of measurement as per Top Portion)

Providing & Fixing Lab Work Station 900 X 600 X 750 or any other specified / required size with partition height 450 mm, with necessary supporting system, top with 19mm. plywood edges thicked with another 75 wide 18mm. ply to give with laminate 1.0mm of approved colour Each table will have a keyboard drawer and full length foot rest. with necessary provision to 3 numbers 5AMP fix switches & sockets and one data point as directed on site etc. (mode of measurement as per Top Portion)

Providing & Fixing Working tables of size 1200x600 or any other specified / required size with necessary supporting system , top with 25mm. plywood edges thicked with another 75 wide 18mm. ply to give thickness. with laminate 1.0mm of approved colour as directed on site etc. Each side table will have drawers made out of 19 mm ply. Each table will have a keyboard drawer and full length foot rest made out of 19 mm ply. (mode of measurement as per Top Portion)

Providing & Fixing Working tables of size 2100x900+1200x450 or any other specified / required size with necessary supporting system , top with 25mm.plywood edges thicked with another 75 wide 18mm. covered with laminate 1.0mm of approved colour and necessary provision to fix switches & power point as directed on site etc. Each side table will have drawers and 2 openable shutters made out of 19 mm ply. Each main table will have a keyboard drawer and foot rest made out of 19 mm ply. (mode of measurement as per Top Portion)

Providing & Fixing Working tables of size 1500x750 or any other specified / required size with necessary supporting system , top 25 mm with 19mm.plywood edges thicked with another 75 wide covered with laminate 1.0mm of approved colour and necessary provision to fix switches & power point as directed on site etc. Each side table will have drawers and 2 openable shutters made out of 19 mm ply. Each main table will have a keyboard drawer and foot rest made out of 19 mm ply. (mode of measurement as per Top Portion)

Providing & Fixing Working tables of size 2400x675 or any other specified / required size with necessary supporting system , top with 19mm.plywood edges thicked with another 75 wide 18mm. ply covered with laminate 1.0mm of approved colour and necessary provision to fix switches & power point as directed on site etc. Each side table will have drawers made out of 19 mm ply. Each main table will have a keyboard drawer and foot rest made out of 19 mm ply. (mode of measurement as per Top Portion)

Providing & Fixing Discussion tables U / C Shaped of size 3200x750x750 or any other specified / required size with necessary supporting system , top with 25mm.plywood edges thicked with another 75 wide 18mm. ply to give thickness. with laminate 1.0mm of approved colour and necessary provision to fix switches & power point as directed on site etc. (mode of measurement as per Top Portion)

Conference table U / C Shaped, Overall Size- Length-13000mm, Width-900mm, Height-750mm or any other specified / required size, Top made thick 25mm thick Plywood with lamination on 1 mm both sides and 2mm PVC Edgebanding, Legs made of 25mm thick Plywood with lamination on both sides and 2mm PVC Edgebanding, 4"skirting ,Front Modestry Box Panel 18mm thick Plywood with lamination on both sides and 2mm PVC Edgebanding. All edges made of 2mm thick PVC edge bend. With Legrand or equivalent make 8 Module Pop Up Box including all accessories 1 each 2 Persons Over all appearance of product as shown in picture. (mode of measurement as per Top Portion)

Providing and Fixing Gain pro Storage system unit/ Singl sided library rack of size 2100 mm x 900 to 1200 mm x 350 to 450 mm. Rack back panel skirting made up of CRCA 0.5 to 0.8 mm. Top bottom stiffner 1.2 mm CRCA and end cover 0.5 mm CRCA D grade as per IS 513. Shelving is made up of 12 bend panel of 0.7 mm thk. CRCA. 4 nos of fixed shelves, A4 size box file can be stored vertically on loading levels. Finish is epoxy polyster powder coated to the thk. of 50 microns (+ - 10 micron).

Providing and Fixing Gain pro Storage system add on units library rack of size 2100 mm x 900 to 1200 mm x 350 to 450 mm. Rack back panel skirting made up of CRCA 0.5 to 0.8 mm. Top bottom stiffner 1.2 mm CRCA and end cover 0.5 mm CRCA D grade as per IS 513. Shelving is made up of 12 bend panel of 0.7 mm thk. CRCA. 4 nos of fixed shelves, A4 size box file can be stored vertically on loading levels. Finish is epoxy polyster powder coated to the thk. of 50 microns (+ - 10 micron).

Providing & fixing Overhead storage of size 3.075mX0.375mX0.5-0.6m or any other specified / required size made in 19mm thick waterproof ISI creative/century make or equivalent ply for all sides and shelves excluding backside 12mm thick waterproof ISI creative/century make or equivalent ply. Shutters and shelves made out of 19mmof storage finished in 1 mm thk outside white laminate 0.8 mm from inside & 1.0 mm thk outside in sued finish laminate from outside shutters as per drawing, brass hinges of approved make, covered with 1.0 mm laminate, magnetic ball catches, complete as per detailed drawing & design (mode of measurement as per front elevation)

Providing & Fixing Low Height storage(1.2x0.9x0.4) & 2.2x0.9x0.45, 400 mm to 450 mm deep and 0.90 m in height or any other specified / required size, 19mm. ply, shutters, brass hinges of approved make, covered with 1.0 mm laminate, magnetic ball catches, all internal surfaces 0.8 mm laminate, all edges outside finished with 1 mm laminate etc. complete as per detailed drawing & design (mode of measurement as per front elevation)

Providing & Fixing Full Height storage of size (1.2x2.4x0.45) or any other specified / required size made in 19mm thick waterproof ply for all sides and shelves including backside 12mm thick waterpro ply. Shutters made out of 19mm keyboard drawer made of 19mm waterproof for shelves & doors of storage finished and white laminate from inside 0.8 mm thk & 1.0 mm thk outside sued finish laminate from outside hinges for shutters as per drawing, brass hinges of approved make, covered with 1.0 mm laminate, magnetic ball catches, complete as per detailed drawing & design (mode of measurement as per front elevation)

Book Rack: Providing and Supplying of Book Rack - 2100 x 400 x 2400 milimetre or any other specified / required size made in 19mm thick waterproof ply for all sides and shelves including backside 12mm thick waterproof ply for shelves and shutter with 5-8mm Glass fixed with Ply frame finished in 1 mm thk outside white laminate from inside 0.80 mm thk in sued finish laminate from outside as per detailed drawing & design (mode of measurement as per front elevation)

Trophy unit: Providing and Supplying of Trophy unit - 1200 x 400 x 2400 milimetre or any other specified / required size made in 19mm thick waterproof ISI creative/century make or equivalent ply for all sides and shelves excluding backside 12mm thick waterproof ISI creative/century make or equivalent ply for shelves and shutter with 8 to 12mm Toughened Glass, Door Lock including scrapping for fixing, cleaning , including application of froasted films as per pattern given by architect etc complete,(mode of measurement as per front elevation)

Providing & Fixing Modular storage unit (1.2x0.9x0.4) & 2.2x0.9x0.45, 400 mm to 450 mm deep and 0.90 m in height or any other specified / required size, 19mm. ply, shutters, brass hinges of approved make, covered with 1.0 mm laminate, magnetic ball catches, all internal surfaces oil painted, all edges finished with 1 mm laminet etc. complete as per detailed drawing & design (mode of measurement as per front elevation)

Providing & fixing in position Wooden finish Hanger Rack with caster make if approved by the University. Spec.: As directed by engineer in charge

Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments , Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color.

Providing and fixing box type notice board of size 1.2mx0.90m or any other specified / required size made out of 19mm thick marine ply box frame & 6mm marine ply for back side of the requisite manufacture viz Corbett/ Anchor/Century/Kenwood/ Duro or equivalent confirming to I.S 303/I.S 710-1980 and 12mm thk soft board covered with tapestry of good approved quality including necessary T.W lipping (25x12mm), hardware, french polishing etc and antitermite treatment to plywood and woodwork with ten years gaurantee bond etc. including all leads & lifts, transportation, all type of taxes etc. complete. The notice board is to be provided 5mm thick plain openable glass shutters with locking arrangement as per Architect, drawing and Instructions of Engineer In Charge. 9Mode of Measurement - as per front view)

Book Rack: Providing and Supplying of Book Rack - 600 x 400 x 2000 milimetre. All Panels are made in 19 milimetre Both side 1.0 milimetre Laminate Color as per Selection. Provide 2 Drawer in This Dressing, All Tuching edge are cover with 2 milimetre Polynvinyl cloride Edge Banding. Fitted with necessary Hardware.

Single Bed @ 2025LX 1000DX 450H Providing and fixing Single Bed of Size 2025Lx1000Dx450H with 5"matress,blanket,bedsheet and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Mattress 5" thk. Sleepwell/ Kurl-On/ Duroflex. As directed by Engineer In Charge .

Sag Bag Rack :- @ 900LX 450DX 1965H Providing and Fixing Sag Bag Rack of size 900L X450D X1965H or required size The Sag Bag Rack side panels and doors are made up of 19mm. plywood with both side laminate 1.0mm of approved colour. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 19mm. plywood with decorative laminate on both sides. The top is made of 19mm. plywood with decorative laminate on both sides and 0.8 mm inside 19mm. plywood . The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the Sag Bag Rack has 5 No of Shelves made of 19mm. plywood has been considered. The Sag Bag Rack handles are Satin SS finish of 160 mm pitch. The Sag Bag Rack has a multipurpose lock . All hingesNecessary good quality hardwares have been considered as required.

Shoe Rack :- Providing and Fixing Shoe Rack of required size The side panels are made up of 19mm. plywood with out sides laminate 1.0mm and 0.8mm inside of approved colour. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 19mm. plywood with laminate on both sides. The top is made of 19mm. The exposed edges of the top are sealed with 2mm thick PVC edge Banding. Necessary good quality hardwares have been considered as required.

DRIVE Optimiser Providing and fixing Optimiser as per specifications enclosed Drive has a unique mechanical design with an optimised speed ratio that reduces the force required to move multiple units at once. It makes the movement effortless. The Drive is suitable for medium to heavy load application areas. Drive Wheel: Locking Knob on Each Unit: Ventilation Ready: Centralized Locking: Wooden Platform 5 No of Shelves

Dais, Stage with Steps DAIS/ STAGE WITH STEPS : Providing and Supplying of Dais size - 5500 x 1600 x 300 or 450 milimetre or any other specified / required size Dais Frame Made in plywood/sal wood/Mild Steel Pipe than Cover From all Side With 19mm. plywood with 1 mm laminate on top and side with necessary fixtures and fittings.

Providing & Fixing in position Podium size of 600mm X 520mm X 1275mm height with specifications, table top, side and bottom 18 mm thick plylwood with 1mm laminated sheet and C.C.T.W. battens 25mm X 12 mm moulding, full length foot rest, full length including all leads and lifts etc. complete with university logo as required size as per picture shown. Spec.: As directed by Engineer-In- Charge.

Providing & fixing Sofa 3 Seater Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms) Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: 3 Seat

Providing & fixing Sofa 2 Seater Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms) Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: 2 Seat

Providing & fixing Sofa 1 single Seater Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms) Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: 1 Seat

Stool for Lab and Class-IV Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge.

Tea Table 900mm X 750mm X 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc.

Providing and fixing 12 mm thick soft board (1.2mx1x0.4) or any other specified / required size covered with a fabric (base rate 300/rm) on a base of 12 mm think plywood finishing the same with 2 no - 100 mm wide horizontal members of 19 mm ply finished with laminate and polishing the edges and lipping with french polish, including making arrangements for fixing lights, passing conduits, fixing switches etc as per design complete

White board Providing & fixing in position whie board made out of 19 mm ply and 1.0 mm laminate - non glossy, marker grade including TW lipping on all sides finished with duco paint, including providing 0.6 mm laminate from back side cleaning etc all complete as per drawings.

White Ceramic Magnetic Board Providing & fixing in position whie board made out of 19 mm ply and 1.0 mm laminate - non glossy, marker grade including TW lipping on all sides finished with duco paint, including providing 0.6 mm laminate from back side cleaning etc all complete as per drawings.

Mirror, Providing & Fixing superior type Belgium mirror of 4mm thick pasted on 18mm thick prelm particle board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The mirror size considered is 1155 x 360 x 4(t). or any other specified / required size The mirror has been pasted using high quality 3M sticker.

Frosted film for glass partition: Supply & Installation of design film on glass partition as per approved design & approved Garware Ltd or Equivalent Grade & Quality. Design Film shall be Self- adhesive with bubble-free installation on clean glass.

Wooden Pelmet Providing and fixing in position pelmet out of 19mm thk BWP plywood with Laminate finish & finished with approved paint from inside. depth of the pelmet -150 mm Item to be completed in all respects as per drawings & instruction from E.I.C. Item to be finished as per instructions of architect. Painting rate shall be included in this item.

Steel eching plate Providing and fixing Steel eching plate with of required size with eching letters on steel plate of 18 guage required size & grade 304 Spec - as directed by Engineer-in-charge.

Supply, installation, testing and commissioning of Flat Interactive Panel and OPS with Bracket System:- 65" Flat Interactive Panel and OPS A) Display Specification-Size-Size-65 inch, Panel Type- ADS, Back Light Unit- DLED, Response Time- 8ms, Aspect Ratio- 16.09, Display Area (HxV) - 1428.48x803.52mm, Pixel Pitch (HxV)- 0.372x0.372mm, Resolution- 3840x2160, Refreshing Frequency- 60Hz, Display Color- 1.07B, Bit Rate- 10 Bit, NTSC Gamut- 68%, Contrast Ratio- 1200:1, Viewing Angle- 178'(H/V), Brightness with glass (Min)- 400 cd/m2, Brightness with glass (Typ)- 450 cd/m2, Life Time 50,000 Hours B) Operating System- System Version- Android 11.0, RAM- 4GB, ROM- 32GB, CPU- A55x4, GPU- Mail G52MP2, C) Touch System - Sensing Type-Infrared Recognition, Touch Recognition- Finger,Passive stylus, Accuracy- ±1.5mm, Touch Point- 40, Minimum object Size- 3mm, Writing Height- 3mm, Supporting OS- Windows/Android/Linux/Mac OS X/Chrome D)Audio- Audio Output- 2.0, Output Power- 2x16w E) Power- Power Supply- 100-240V, 50/60Hz, Standby Power- ≤0.5W, Power Consumption (Typ/Max)- 160/320W. F) I/O Interface- HDMI In- 3, HDMI Out- 1, USB 2.0- 1, USB Type-C- 1, USB 3.0- 4, Touch Out- 2, VGA In- 1, Audio/MIC In- 1, Audio Out- 1, SPDIF- 1, RS232- 1, RJ45 In- 1, RJ45 Out- 1 G) Physical Specifications- Dimension (L×H×D)- 1488.4×896.6×87.2mm, Package Dimension (L×W×H)- 1628×208×1005mm, VESA- 600×400mm, Net Weight- 34.95Kg, Gross Weight- 44.70Kg H)Accessories- Power Cord- 1, HDMI Cable- 1, USB Touch Cable (Type A-B)- 1, Remote Control- 1, Writing Pen- 2, I) Environmental Conditions- Operation Temperature- 0° C ~ 40° C, Operation Humidity- 10% ~ 90%RH, Storage Temperature- -20° C ~ 60° C, Storage Humidity- 10% ~ 90%RH, Altitude- Below 5000 Meter J) Optional PC Module- PC Module- OPS62A, Wireless Module- SI07 K) Certification- BIS, EMC, CE, FCC, UKCA

Supply, installation, testing and commissioning of Flat Interactive Panel and OPS with Bracket System:- 75" Flat Interactive Panel and OPS A) Display Specification-Size-75 inch, Panel Type- ADS, Back Light Unit- DLED, Response Time- 8ms, Aspect Ratio- 16.09, Display Area (HxV) - 1649.664x927.936mm, Pixel Pitch (HxV)- 0.4296x0.4296mm, Resolution- 3840x2160, Refreshing Frequency- 60Hz, Display Color- 1.07B, Bit Rate- 10 Bit, NTSC Gamut- 68%, Contrast Ratio- 1200:1, Viewing Angle- 178'(H/V), Brightness with glass (Min)- 400 cd/m2, Brightness with glass (Typ)- 450 cd/m2, Life Time 50,000 Hours B) Operating System- System Version- Android 11.0, RAM- 4GB, ROM- 32GB, CPU- A55x4, GPU- Mail G52MP2, C) Touch System - Sensing Type-Infrared Recognition, Touch Recognition- Finger,Passive stylus, Accuracy- ±1.5mm, Touch Point- 40, Minimum object Size- 3mm, Writing Height- 3mm, Supporting OS- Windows/Android/Linux/Mac OS X/Chrome D)Audio- Audio Output- 2.0, Output Power- 2x16w E) Power- Power Supply- 100-240V, 50/60Hz, Standby Power- ≤0.5W, Power Consumption (Typ/Max)- 200/360W. F) I/O Interface- HDMI In- 3, HDMI Out- 1, USB 2.0- 1, USB Type-C- 1, USB 3.0- 4, Touch Out- 2, VGA In- 1, Audio/MIC In- 1, Audio Out- 1, SPDIF- 1, RS232- 1, RJ45 In- 1, RJ45 Out- 1 G) Physical Specifications- Dimension (L×H×D)- 1709x1020x88mm, Package Dimension (L×W×H)- 1863x225x1140mm, VESA- 800×400mm, Net Weight- 47.30Kg, Gross Weight- 60.55Kg H)Accessories- Power Cord- 1, HDMI Cable- 1, USB Touch Cable (Type A-B)- 1, Remote Control- 1, Writing Pen- 2, I) Environmental Conditions- Operation Temperature- 0° C ~ 40° C, Operation Humidity- 10% ~ 90%RH, Storage Temperature- -20° C ~ 60° C, Storage Humidity- 10% ~ 90%RH, Altitude- Below 5000 Meter J) Optional PC Module- PC Module- OPS62A, Wireless Module- SI07 K) Certification- BIS, EMC, CE, FCC, UKCA

Supply, installation, testing and commissioning of Flat Interactive Panel and OPS with Bracket System:- 86" Flat Interactive Panel and OPS A) Display Specification- Size-86 inch, Panel Type- ADS, Back Light Unit- DLED, Response Time- 8ms, Aspect Ratio- 16.09, Display Area (HxV) - 1895.04x1065.96mm, Pixel Pitch (HxV)- 0.4935x0.4935mm, Resolution- 3840x2160, Refreshing Frequency- 60Hz, Display Color- 1.07B, Bit Rate- 10 Bit, NTSC Gamut- 68%, Contrast Ratio- 1200:1, Viewing Angle- 178'(H/V), Brightness with glass (Min)- 400 cd/m2, Brightness with glass (Typ)- 450 cd/m2, Life Time 50,000 Hours B) Operating System- System Version- Android 11.0, RAM- 4GB, ROM- 32GB, CPU- A55x4, GPU- Mail G52MP2, C) Touch System - Sensing Type-Infrared Recognition, Touch Recognition- Finger,Passive stylus, Accuracy- ±1.5mm, Touch Point- 40, Minimum object Size- 3mm, Writing Height- 3mm, Supporting OS- Windows/Android/Linux/Mac OS X/Chrome D)Audio- Audio Output- 2.0, Output Power- 2x16w E) Power- Power Supply- 100-240V, 50/60Hz, Standby Power- ≤0.5W, Power Consumption (Typ/Max)- 350/520W. F) I/O Interface- HDMI In- 3, HDMI Out- 1, USB 2.0- 1, USB Type-C- 1, USB 3.0- 4, Touch Out- 2, VGA In- 1, Audio/MIC In- 1, Audio Out- 1, SPDIF- 1, RS232- 1, RJ45 In- 1, RJ45 Out- 1 G) Physical Specifications-Dimension (L×H×D)- 1957x1160x100mm, Package Dimension (L×W×H)- 2110x225x1283mm, VESA- 800×400mm, Net Weight- 58.55Kg, Gross Weight- 75.90Kg H)Accessories- Power Cord- 1, HDMI Cable- 1, USB Touch Cable (Type A-B)- 1, Remote Control- 1, Writing Pen- 2, I) Environmental Conditions- Operation Temperature- 0° C ~ 40° C, Operation Humidity- 10% ~ 90%RH, Storage Temperature- -20° C ~ 60° C, Storage Humidity- 10% ~ 90%RH, Altitude- Below 5000 Meter J) Optional PC Module- PC Module- OPS62A, Wireless Module- SI07 K) Certification- BIS, EMC, CE, FCC, UKCA

Supply, installation, testing and commissioning of Flat Interactive Panel and OPS with Bracket System:- 98" Flat Interactive Panel and OPS A) Display Specification- Size-98 inch, Panel Type- ADS, Back Light Unit- DLED, Response Time- 8ms, Aspect Ratio- 16.09, Display Area (HxV) - 0000.00x0000.00mm, Pixel Pitch (HxV)- 0.0000x0.0000mm, Resolution- 3840x2160, Refreshing Frequency- 60Hz, Display Color- 1.07B, Bit Rate- 10 Bit, NTSC Gamut- 68%, Contrast Ratio- 1200:1, Viewing Angle- 178'(H/V), Brightness with glass (Min)- 400 cd/m2, Brightness with glass (Typ)- 450 cd/m2, Life Time 50,000 Hours B) Operating System- System Version- Android 11.0, RAM- 4GB, ROM- 32GB, CPU- A55x4, GPU- Mail G52MP2, C) Touch System - Sensing Type-Infrared Recognition, Touch Recognition- Finger,Passive stylus, Accuracy- ±1.5mm, Touch Point- 40, Minimum object Size- 3mm, Writing Height- 3mm, Supporting OS- Windows/Android/Linux/Mac OS X/Chrome D)Audio- Audio Output- 2.0, Output Power- 2x16w E) Power- Power Supply- 100-240V, 50/60Hz, Standby Power- ≤0.5W, Power Consumption (Typ/Max)- 350/520W. F) I/O Interface- HDMI In- 3, HDMI Out- 1, USB 2.0- 1, USB Type-C- 1, USB 3.0- 4, Touch Out- 2, VGA In- 1, Audio/MIC In- 1, Audio Out- 1, SPDIF- 1, RS232- 1, RJ45 In- 1, RJ45 Out- 1 G) Physical Specifications-Dimension (L×H×D)- 0000x0000x000mm, Package Dimension (L×W×H)- 0000x000x0000mm, VESA- 800×400mm, Net Weight- 58.55Kg, Gross Weight- 75.90Kg H)Accessories- Power Cord- 1, HDMI Cable- 1, USB Touch Cable (Type A-B)- 1, Remote Control- 1, Writing Pen- 2, I)Environmental Conditions- Operation Temperature- 0° C ~ 40° C, Operation Humidity- 10% ~ 90%RH, Storage Temperature- -20° C ~ 60° C, Storage Humidity- 10% ~ 90%RH, Altitude- Below 5000 Meter J) Optional PC Module- PC Module- OPS62A, Wireless Module- SI07 K) Certification- BIS, EMC, CE, FCC, UKCA

Supply, installation, testing and commissioning of Flat Interactive Panel and OPS with Bracket System:- 110" Flat Interactive Panel and OPS A) Display Specification-Size-110 inch, Panel Type- ADS, Back Light Unit- DLED, Response Time- 8ms, Aspect Ratio- 16.09, Display Area (HxV) - 0000.00x0000.00mm, Pixel Pitch (HxV)- 0.0000x0.0000mm, Resolution- 3840x2160, Refreshing Frequency- 60Hz, Display Color- 1.07B, Bit Rate- 10 Bit, NTSC Gamut- 68%, Contrast Ratio- 1200:1, Viewing Angle- 178'(H/V), Brightness with glass (Min)- 400 cd/m2, Brightness with glass (Typ)- 450 cd/m2, Life Time 50,000 Hours B) Operating System- System Version- Android 11.0, RAM- 4GB, ROM- 32GB, CPU- A55x4, GPU- Mail G52MP2, C) Touch System - Sensing Type-Infrared Recognition, Touch Recognition- Finger,Passive stylus, Accuracy- ±1.5mm, Touch Point- 40, Minimum object Size- 3mm, Writing Height- 3mm, Supporting OS- Windows/ Android/ Linux/ Mac OS X/ Chrome D)Audio- Audio Output- 2.0, Output Power- 2x16w E)Power- Power Supply- 100-240V, 50/60Hz, Standby Power- ≤0.5W, Power Consumption (Typ/Max)- 350/520W. F) I/O Interface- HDMI In- 3, HDMI Out- 1, USB 2.0- 1, USB Type-C- 1, USB 3.0- 4, Touch Out- 2, VGA In- 1, Audio/MIC In- 1, Audio Out- 1, SPDIF- 1, RS232- 1, RJ45 In- 1, RJ45 Out- 1 G) Physical Specifications- Dimension (L×H×D)- 0000x0000x000mm, Package Dimension (L×W×H)- 0000x000x0000mm, VESA- 800×400mm, Net Weight- 58.55Kg, Gross Weight- 75.90Kg H)Accessories- Power Cord- 1, HDMI Cable- 1, USB Touch Cable (Type A-B)- 1, Remote Control- 1, Writing Pen- 2, I)Environmental Conditions- Operation Temperature- 0° C ~ 40° C, Operation Humidity- 10% ~ 90%RH, Storage Temperature- -20° C ~ 60° C, Storage Humidity- 10% ~ 90%RH, Altitude- Below 5000 Meter J) Optional PC Module- PC Module- OPS62A, Wireless Module- SI07 K) Certification- BIS, EMC, CE, FCC, UKCA

SITC of Air-Conditioning system Supply, Installation, Testing & Commissioning of Variable Refrigerant Flow modular type air-conditioning system. The system shall be complete with indoor and out door units with individual controller as per detail given in specifications and having following items : (Imported Items) Providing and supplying of indoor and out door units with Accessories:- Ceiling mounted Four way Flow Compact Cassette type units Providing and supplying 4.0 Ton Cassette A,C, unit 3 STAR INVERTER unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.

Providing and supplying 3.0 Ton Cassette A,C, unit 3 STAR INVERTER unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.

Providing and supplying 2.5 Ton Cassette A,C, unit 3 STAR INVERTER unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.

Providing and supplying 1.5 Ton Cassette A,C, unit 3 STAR INVERTER unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.

Wall Mounted Hi-wall (Split) type units Supplying and Installing Bluestar / Voltas / Mitsubishi/ O General/ LG / Samsung / Lloyd / Diakin / Carrier -Midea make split type room Airconditioning unit 2 Ton 5 star rating ( Minimum ISEER value not less than 4.7 Peroid 1/01/2021 to 31/12/2023) inverter split AC suitable to opereate on 230-250V, 50 cycles, AC supply having 1 No. of air handling unit hiwall / floor mounting type complete with Refrigerent R410A / R32 and copper condenser at position including copper pipping and insulation of 3Mtr. and also necessary core cut, MS stand / brackets to install at site as directed by Enginner In-Charge. ( No additional payment will be made for any other accessories required except copper piping and insulation as per Sr.No.4 )

Supplying and Installing Bluestar / Voltas / Mitsubishi/ O General/ LG / Samsung / Lloyd / Diakin / Carrier -Midea make split type room Airconditioning unit 1.5 Ton 5 star rating ( Minimum ISEER 5.0. Peroid 1/01/2021 to 31/12/2023) inverter split AC suitable to opereate on 230-250V, 50 cycles, AC supply having 1 No. of air handling unit hiwall / floor mounting type complete with Refrigerent R410A / R32 and copper condenser at position including copper pipping and insulation of 3Mtr. and also necessary core cut, MS stand / brackets to install at site as directed by Enginner In-Charge. ( No additional payment will be made for any other accessories required except copper piping and insulation as per Sr.No.4)

Supplying and Installing Bluestar / Voltas / Mitsubishi/ O General/ LG / Samsung / Lloyd / Diakin / Carrier -Midea make split type room Airconditioning unit 1 Ton 5 star rating ( Minimum ISEER 5.0. Peroid 1/01/2021 to 31/12/2023) inverter split AC suitable to opereate on 230-250V, 50 cycles, AC supply having 1 No. of air handling unit hiwall / floor mounting type complete with Refrigerent R410A / R32 and copper condenser at position including copper pipping and insulation of 3Mtr. and also necessary core cut, MS stand / brackets to install at site as directed by Enginner In-Charge. ( No additional payment will be made for any other accessories required except copper piping and insulation as per Sr.No.4)

Installation, Testing & Commissioning indoor and out door units & Accessories:- Installation, Testing & Commissioning with indoor and out door units & Accessories:- Installation charges for Cassette AC

Installation, Testing & Commissioning with indoor and out door units & Accessories:- Installation charges for Split AC

Core cutting Charges RO Providing and making Holes (Core cutting ) in RCC chajjas , slab, pardi, beam of dia. 100 mm for passing the pipe line. Spec. No: - As directed by Engineer in charge

Supply, Installation, Testing & Commissioning of the following components for Low side work: M.S. stand for Indoor unit Cassette- Duly epoxy coated/galvanised of M.S. Structure for installing Indoor Cassette units along with vibration isolation pad . MS stand shall be chouky or wall mounted type as per site requirements.

M.S. stand for Outdoor unit Cassette - Duly epoxy coated/galvanised of M.S. Structure for installing Outdoor Cassette units along with vibration isolation pad . MS stand shall be chouky or wall mounted type as per site requirements.

M.S. stand for Outdoor Split unit - Duly epoxy coated/galvanised of M.S. Structure for installing Outdoor Split units along with vibration isolation pad . MS stand shall be chouky or wall mounted type as per site requirements.

M.S. stand for Outdoor Split unit big - Duly epoxy coated/galvanised of M.S. Structure for installing Outdoor Split units along with vibration isolation pad . MS stand shall be chouky or wall mounted type as per site requirements.

Copper piping with Insulation for Cassette AC Unit - All Refrigerant copper piping for Cassette / VRV / VRF system having 18G Thickness or Recommended Thickness by VRV/VRF Manufacturer along with insulation and all accessories like, T, Bend, Elbows complete. piping shall be pressure tested for 400 PSI, between indoor & outdoor units with 19mm/13mm Nitrile rubber insulation. All piping inside the room shall be properly supported on perforated trays with hanger and exposed piping shall be properly covered with UV treated cloth / Aluminium faced & should be in a closed tray with properly supported. Note :- However contractor to check Pipe dia & length as per Cassette / VRV/VRF Manufacturer Standard. Approved Make of Copper Piping:- Mandev / Totaline / Rajco Approved Make of Insulation :- Armacell / A-Flex / K-Flex

Copper piping with Insulation for Split AC Unit - All Refrigerant copper piping for Split / VRV / VRF system having 18G Thickness or Recommended Thickness by VRV/VRF Manufacturer along with insulation and all accessories like, T, Bend, Elbows complete. piping shall be pressure tested for 400 PSI, between indoor & outdoor units with 19mm/13mm Nitrile rubber insulation. All piping inside the room shall be properly supported on perforated trays with hanger and exposed piping shall be properly covered with UV treated cloth / Aluminium faced & should be in a closed tray with properly supported. Note :- However contractor to check Pipe dia & length as per Split / VRV/VRF Manufacturer Standard. Approved Make of Copper Piping:- Mandev / Totaline / Rajco Approved Make of Insulation :- Armacell / A-Flex / K-Flex

Electrical Cable.- Providing & fixing control cum transmission wiring of 2 core x 1.5 sqmm copper in suitable PVC conduits between indoors and out door unit.

Drain Pipe with Nirtile rubber pipe - Supplying, laying, fixing, testing of Rigid PVC Pipes of 6 kg/sqcm, duly insulated with 6 mm Thick Nirtile rubber pipe section, complete with all necessary fittings such as elbows, tees, reducers, serviceable 'P' traps. etc and supports such as clamps etc complete as per specifications

Supplying, Erecting, Testing & Commissioning of self contained drinking water coolers with (Non - CFC Refrigerant) Energy Efficient Compressors of : 1) Minimum Cooling Capacity - 20 Ltrs./Hour. 2) Storage Capacity - 40 Ltrs. 3) Stainless Steel Body. 4) Consumption in watt - less than 850 watt. 5) Make - Bluestar/Voltas/Usha.

Supply & Erecting Water Purifiers with Pre- Filter of specs : 1) Choke - Copper. 2) UV Tube - 16 Watt capacity (philips). 3) Pre carbon Filter. 4) Post Carbon Filter. 5)Sediment Filter. 6) Minimum Output Purified Water - 200 Ltrs./Hour. 7) Make - Bluestar/Eureka/ Kent/AO Smith..

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying and Erecting online UPS Pure Sine Wave of 10KVA capacity with MCB protection and with bypass switch with inbuilt transformer isolation. (3 pase input and 1phase output) (Make - Microtek/ Vertive/APC/Numeric)

Supplying and Erecting 12V/150Ah SMF Battery with battery terminal wire, duly charged complete. (Make- Excide/Amron/ Amar Raja/ Luminous)

Providing and Erecting Racks and Links suitable for 16 /20 no. (150Ah) Battries for connection and mounting purpose.