Pune University Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Pune University - UOFP Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date30 Sep 2023
Closing Date23 Oct 2023
Tender Amount₹ 4,99,82,037
Costs
EMD
₹ 5,00,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Construction Of Aluform Shuttering Compound Wall And Allied Civil Work Around Land Acqired For Nashik Sub Centre Shivnai Tal Dindori Nashik At Savitribai Phule Pune University
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_UOFP_949272_1Bid Award Id
ViewTender No
C.A.No.2023-24/SPPU/ ESTATE/EE/ CIVIL/19Tender Authority
Pune University ViewPurchaser Address
-Website
http://www.unipune.ac.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Excavation for foundation in Hard rock by chiselling, wedging, line drilling,etc. including trimming and levelling the bed,removing the excavated material upto a distance of 50metres beyond the building area stacking as directed,dewatering and backfilling with available earth/murum watering,ramming etc.complete. (Lift upto 1.5 m). By Mechanical Means
850
-
1371.05
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layersincluding watering and compacting etc. complete.
553
-
125.9
Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc.complete.
500
-
1485.85
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete
275
-
2167.95
Providing soling using 80mm size trap metal in 15cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.
10
-
2208.8
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface-Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm area,thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes.complete.
10
-
700
Providing and fabricating structural steelwork in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/ bolted/ welded connections without connecting plates, braces etc.and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc.complete.
1.5
-
106834.35
Providing, fabricating and erecting at site of work the tubular steel structure as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts , base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge ( B-18 Page One Number 78 )
1.5
-
120457.7
Providing and fixing 16 mm Sq. rod pointed at the end at distance 250 mm c/c welded on 16 mm sq rod which is embeded in RCC pardi upto 6 inch as per dwg. and design
8020
-
400
Providing and fixing mild steel grill work weighing 15 kg / sqm. for Compound wall as per drawing including fixtures, necessary welding & painting with one coats of anti corrosive paint & two coats of oil painting complete. Spec. No. : Bd.U.1 Page No. 537
10
-
1790.65
Providing and fixing mild steel grill work weighing 20 kg / sqm. for compound wall as per drawing including fixtures, necessary welding & painting with one coats of anti corrosive paint & two coats of oil painting complete. Spec. No. : Bd.U.1 Page No. 537
10
-
2199.35
Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S. Angles (50 mm x 50 mm x 6mm) at 2.5 Metres, centre to centre including excavating pits for foundation, fixing post in cement concrete of size 45 x 45 x 45 cm., fastening the wire and painting the M.S. Angles with one coat of red lead primer and two coats of painting etc. complete. Spec. No. : Bd.W.3 Page No. 583
5
-
880
Providing and fixing mild steel grill gate with frame having weight of gate 30 kg / sqm as per the detailed drawing and 2 coats of oil painting of approved shade etc. complete.
65
-
7700
Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm 8 gauge thick and fixed 75 mm above Ground level vertical M.S Angle of 40 x 40 x 6 mm size embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c / c with iron bar 16 mm dia as hold fast including welding link with angle frame at 30 cm c / c nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm Angles both sides at every corner or bends embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. Additional Item Spec. No. : As directed by Engineer in charge.
50
-
2663.4
Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, form work, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete.With fine aggregate (Crushed sand VSI Grade)
15
-
6792.2
Providing and laying Cast in situ/ ReadyMix cement concrete in M15 of trap/ granite/ quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, form work, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc.complete. The Cement Mortar1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunnybag, plastic, tarpaulinetc. (Wooden centering will not be allowed.), with reversible Drum Typ emixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
320
-
7424.5
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/ quartzite/ gneiss metal for R.C.C.work in foundations like raft, strip foundations, grillage and footings of R.C.C.columns and steel stanchions etc.including bailing out water, Steelcentering, formwork, coverblocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structuralsteel) etc. complete, with reversible Drum Type mixer etc.complete.With fine aggregate (Crushed sand VSI Grade)
785
-
9250
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C.columns as per detailed designs and drawings or as directed including steel centering, formwork, coverblocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete, (Excluding reinforcement and structural steel). with reversible Drum Type mixer etc.complete.With fine aggregate (Crushedsand VSI Grade)
30
-
14401.7
Providing and laying Cast in situ/ Ready Mix cement concrete in M-25of trap/ granite/ quartzite/ gneiss metal for R.C.C.beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, coverblocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc.complete.With fine aggregate(Crushed sand VSI Grade)
10
-
13662.15
Providing and laying Cast in situ/ Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C.pardi of150mm thickness including steel centering, formwork, coverblocks, laying/ pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with reversible Drum Type mixer etc.complete.With fine aggregate (Crushed sand VSI Grade) formwork for pardi is aluform/ MIVAN material.
820
-
19815
Providing and laying Cast in situ/ ReadyMix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centring, formwork, coverblocks, laying/ pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with reversible Drum Type mixer etc. complete. With fine aggregate (Crushed sand VSI Grade)
5
-
8265.05
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc.as per detailed designs, drawings and schedules.including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
122
-
94098.45
Providing and fixing colour coated Zinc alume (R) AZ150 (min150 gms/ sq.mt. total on each side) profiled sheets for roofing. The feed material is manufactured outof nominal 0.45mm Base Metal Thickness (BMT) (0.5mmTCT), Hi- strength steel with min. 550 MP ayield strength, metallic hot dip coated with Aluminium- Zincalloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with in organic pigment). The paint shall have a total coating thickness of nominal 35um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050mm effective cover width and nominal 25-30mm deep ribs with subtle square fluting in the five pan at nominal 180-250mmcenter- to- center. The endrib shall be designed for anti-capillary groove. and returnleg. The feed material should have coil manufacturers product details marked are gularinterval. Including fasteners with min. fastened with min.25um Zinc-Tinalloy coated, Hexhead, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) Spec. No: -As directed by Engineer incharge
10
-
1231.65
Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter- to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 600 mm girth (Surface Width).
5
-
788.55
Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually,striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.
15
-
9177.6
Providing second class Burnt Brick masonry with conventional/ I.S.type bricks in cement mortar1:6 in superstructure including striking joints, raking out joints, watering andscaffolding etc. Complete
15
-
9428.3
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6mm diameter/ 2hoop iron strips 25mm X1. 6mm placed at every third course,properly bentand bonded at ends scaffolding, racking out joints and watering etc.complete.
15
-
1296.45
Providing uncoursed rubble masonry of trap/ granite/ quartzite/ gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls/ in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete.
4
-
6163.9
Providing and fixing 25mm thick POLYMER expansion joints / bituminus pad for in retaining wall, compound wall.
175
-
1275
Providing sandfaced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
150
-
712.35
Providing and applying laying Aggregate plaster in granite/ marblestones, as decorative finish to give granite/ marble like appearance to concrete, brick or block surfaces in all position including preparation of surface smoothly, evenly by racking of joints in case of Brick or blockwork including backing layer of 12mm thick with cement mortar 1:3 with 2% integral cement waterproofing compound, roughening for wall keying hardening and drying the surface for a minimum five days gaps including second coat of cement lime mortar into a proportion 1:4 preparing the surface for three coat of marble finish plaster giving a thin coat of white cement and two parts of course calcite powder ,applying the mortar with steel float on the surface in properevenness applying at coat of white cement and lime to set a smooth finish then applying a thin coat of slurry made of white cement and black oxide colour in required proportion by the steel float to get black streaks on the surface and curing the surface for two days including all materials and labour etc. complete.
50
-
2700.35
Providing flush grooved pointing with cement mortar 1:3 for stone masonry work includingscaffolding and curing etc. complete.
100
-
194.75
Providing patti/ band 75mm wide on plastered surface 12mm to 15mm thick in C.M.1:3 line and level including neat finishing scaffolding curing etc. complete.
5
-
60.9
Providing and making Holes (Core cutting ) in RCC chajjas , slab, pardi, beam of dia. 100 mm for passing the pipe line. Spec. No: - As directed by Engineer in charge
5
-
700
Providing and making Holes (Core cutting ) in U.C.R. wall 100 mm for passing the pipe line. Spec. No: - As directed by Engineer in charge
5
-
1800
Providing and making Holes (Core cutting ) in RCC chajjas ,slab,pardi,beam of dia. 150 mm for passing the pipe line. Spec. No: - As directed by Engineer in charge
5
-
850
Providing and laying in situ cement concrete M-30 with tremix treatment for 200mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen (excluding reinforcement) with coarse and fine aggregate (natural sand/ VSI grade finely washed crushed sand) etc. complete
20
-
9583.75
Providing and fixing heavy duty interlocking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc.complete. (using 100% crushed sand)
50
-
1169.55
Providing and fixing heavy duty interlocking concrete Rubber mould glossy paving blocks of 80mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand)
10
-
1489.5
Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding,if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.
50
-
89.15
Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes,fine steel wool,scrappers and sand paper, scaffolding etc.complete.
7.92
-
38.8
Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete.
8000
-
309.45
Providing and fixing in position 32mm thick solid commercial flush door shutters, single / double shuttered, waterproof & termite proof as per Indian standard specification (Century ply make) including providing 30 X 20mm. T.W. lipping all around and both side 1mm thick laminate (Century / Greeenlam make) with three coats of fresh polish of approved color on top & vertical thickness, for bottom thickness with one coat of primer and two coats of approved satin paint (Asian / ICI make), all shutters tested for smooth easy operation etc. all as per architectural drawings & details etc. complete. (The rate is including all hardware schedule as per each type) (Flush door Basic Rate Rs.1350/- Sqm.) Actual flush door size will be paid (The rate is including all hardware schedule as per each type) HARDWARE SCHEDULE :-
a) S.S. Butt Hinges of Supreme Suzu make (100 x 75 x 3) SS 202 4 Nos. (Basic Price = Rs. 165.20 /- Per No.) b) Handle A - 200mm long and 19mm thick SS 304 Handles of Kich Make - 1 Pair (Basic Price = Rs. 1351.10/- Per No.) c) Aldrop - 250mm long & 16mm dia.S.S. 202 Aldrop of Plus point make - 1 Nos (Basic Price = Rs. 778.80 /- Per No.) d) Round Latch - 200mm long & 12mm dia. S.S. - 1 Nos (Basic Price = Rs. 578.20 /- Per No.)
e) Tower bolt - 200mm long S.S. 202 Tower bolt Suzu Super Premium 200 x 10mm - 1 Nos (Basic Price = Rs.247.80 /- Per No.) f) Door Stopper - Suzu SS 202 Door Stopper - 1 Nos (Basic Price = Rs.118 /- Per No.) OR Equivalent Make
5
-
6881
Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame / dado / window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.
15
-
4611.8
Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising without box . Ground Floor
2
-
5468.44
Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box
Ground Floor
2
-
5690.83
Providing and laying concrete pipes of I.S.NP.class of 150mm dia meter in proper line, level and slope including necessary collars,excavation,laying,fixing with collars in cement mortar 1:1 and refilling the trench complete.
30
-
555.95
Providing and laying concrete pipes of I.S.NP. Class of 225mm dia meter in proper line, level and slope including necessary collars,excavation,laying,fixing with collars in cement mortar1:1 and refilling the trench complete.
20
-
588.5
Providing and laying concrete pipes of I.S.NP.class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
20
-
780.45
Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988. a) 450 mm
30
-
1013.35
Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988. a) 600 mm
30
-
1371.05
Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc. complete as directed by Engineer in- charge
(For all class of pipes.) as per IS- 783-1985.
5
-
465.75
Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C.Cover medium duty 140 Kilogramwith frame etc complete.
5
-
10729.85
Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C.Cover medium duty140 Kilogram with frame etc complete.
5
-
12944.5
Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm With R.C.C. raft in B.C.soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W.pipes,BrickMasonry,plastering from inside and air tight with 75 mm thick R.C.C. cover medium duty 140 Kilogram etc. complete.
5
-
14169.45
Providing and constructing on sewer, B. B. masonry circular manhole with concentric cone 1.2 M dia. at bottom and 0.5 M dia. at top and upto a depth of 2.00 M with 23 cm brick work in CM 1:4 proportion excluding excavation including foundation concrete 250 mm thick and haunches and channels in C. C. 1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighing 5.5 kg., 1:2:4 coping and providing and fixing approved make and quality S.F.R.C. frame and cover of 56 cm dia. etc. complete as directed by Engineer in charge.
1
-
27785.6
Poviding and laying UPVC 100 mm pipe for passing pipe line
100
-
550
Material shifting by truck ( As directed by engineer in charge)
350
-
800
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.Ground Floor Quantity
5
-
432.55
Providing and applying stonecrete plaster coating of 10 to 12mm. Thick hardest texture with rich granular effect decorative in mixing with 8 to 12mm size, natural marble stone chips & marble powder. Multi chips combination to be achived with 60% kotah grey, 20% marble white and 20% kadappa black design including preparation of surface to receive stonecrete plaster filling cracks if any, scaffolding and all required accessories etc. the rate to include base cement plaster of 12mm thick in CM 1:4, wooden bottom fixing (20mm to 25mm) for groove, washing of plaster to remove excess cement and calcium sillicate watering etc. complete as per design, drawing or as instructed by Engineer in charge or as per manufacturer details approved by us. The maximum panel size shall be 7 Sqm. and the groove item with teak wood spacer etc. shall not be paid separately
5
-
2200
BASIC TEST OF CEMENT. Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness
7
-
3770
Basic Test Of Aggregate Water absorption, Specific Impact Value, Crushing Value
7
-
2100
Sieve Analysis
7
-
550
Abrasion Value
7
-
950
Flankiness Index & Elongation Index
7
-
700
Soundness
7
-
2000
Bulk Density
7
-
300
Fine Aggregate Fineness Modulus (Sieve Analysis), Silt & Clay Content
7
-
1100
Chlorite and Sulphate Content
7
-
650
Silt Factor
6
-
700
BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).
3
-
2175
CONCRETE Compressive Strength OF C.C. Cube (Set of 3 cubes).
50
-
690
Concrete Mix Design (With all Tests on basic materials)
1
-
13755
STEEL BAR TESTING Upto16mm (set of 3 bars)
7
-
1000
Above 16mm (setb of 3 bars) (Tensile stength, % Elongation, Yield stress, weight/Meter, Bend / Rebend Test, Proof stress)
7
-
1300
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements