Pune University Tender

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated materials upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum ramming, watering etc. complete. (Lift upto 1.5m).Spec. No.: Bd.A.5 Page No. 259

filling in plinth & floors with contractors soil Sp. No. Bd A 11 Page No.263

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to be provided,finishing if required and curing complete,with reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Crushed sand VSI Grade finely washed etc) Bd. E. 1 Page No. 287

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc) Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc) , Spec. No: - Bd. F.12 Page No.304 & B 7 Page 38

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade finely washed etc) Bd.F.3 Page No. 298 and B.7, Page No.38

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc) Bd.F.5 Page No. 300 and B- 7,Page No 38.

Providing and fixing in position TMT-FE-500 reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No: - Bd.F.17 Page No. 306

Providing dry/trap/granite/gneiss rubble stone soling 15 cm to 20 cm thick including hand packing & compacting complete. Spec. No: - Bd. A.12 Page No.264

Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering, Complete. Spec. No: - Bd. G.1 Page No.313

Providing second class Burnt Brick masonary with conventional/ I.S. type bricks in cement mortor 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete. Spec. No: - Bd. G.5 Page No.315

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering Complete. Spec.No.:Bd.G.7PageNo.316

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. Spec. No.: Bd. L.2 Page No. 368

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing complete. Spec. No.: Bd. L.10, Page No.370

Providing sand faced plaster externally in cement mortar using approved screened sand in. all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 Kg. per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding etc. complete. Bd.L.7 Page No. 369

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required. Spec : As directed by Engineer In Charge

Providing and applying priming coat over new wood and wood based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting, scaffolding etc. complete.Spec : As directed by Engineer In Charge.

Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding etc. complete.Spec : As directed by Engineer In Charge

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.Spec. No: - Bd P. 5 Page No. 413

Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) complete.Spec. No.: Bd.0.5 Page No. 405

Providing and applying two coats of APEX exterior paint of approved manufacture and of approved colour to the plastered surface including cleaning and preparing the surfaces, applying priming coat, scaffolding if necessary, watering the surfaces for two days complete. Spec :- As directed by Engineer in charge.

Providing and applying 2 coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) complete.Spec. No.: Bd.0.7 Page No. 406

Material Shifting by truck Spec. No: - As directed by Engineer in charge

Mazdoor, Unskilled Heavy Male/Female Spec. No: - As directed by Engineer in charge

Providing and fixing on walls / ceiling / floors, ------------ mm dia heavy grade having embossed as ISI mark galvanized iron pipes with necessary fitting, remaking good the demolished portion and with primer of anti corrosive oil paint 2 coats complete.a) 15 mm dia at 1.48 kg/meter,Bd.V.5 Page No. 551

b) 20 mm dia at 1.93 kg/meter

c) 25 mm dia at 3.01 kg/meter

Providing and fixing C.P. BIB cock with wall flange jaquar make including necessary sockets / union nut etc. complete. Spec. No: - As directed by Engineer in charge

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed designs and drawing including fixing in position without connecting plates, braces etc. and one coat of anticorrosive paint and over it two coat of oil paintings of approved quality and shade complete. Spec. No: - Bd.-C 2 Page No. 275

Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc.complete. Spec. No. : As directed by Engineer-in-charge. And B-18 Page No. 78

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. Bd.A.10 Page No. 262

Providing and laying in situ cement concrete M -30 with tremix treatment for 150 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen ( excluding reinforcement) with coarse and fine aggregate ( natural sand )etc. complete

Supply & Erection of Pre Engineering steel building (PEB) of size 18 mtr X 35 mtr X 5mtr clear height at knee with 8 no SS make 304 grade turbo vantiletors of size 600mm dia with sky light in polycorbonate/ transperent fibre sheet in alternate bay as per roof plan. Box shaped,colour coated,0.5 mm thk galvalume steel gutter of 6 inch width and down spout of rectagular shaped,machine pressed and riveted of 0.5 mm galvanised steel have 45 degree elbow at bottom at every column location.Diagonal rod bracing for roof and side walls considered with primary and secondary members as per specification and drawing with red oxide primer one coat and two coats of synthetic enemel paints. for connections Anchor bolts, High strength bolts for primary connections, machine bolts for secondary connections, self drilling self tapping screws for sheeting, fasteners,sealer,closures,ridge caps,flashing and trim, with one openable mechanical rolling shutter with gear box of size 6 x 4 m and one sliding gate of size 6 mtr length X 4 mtr height and covering with pre coated sheets 0.5 mm thk. Roof with slope 1:10 covered 0.5 mm thk.pre coated sheets.and on 4 side of walls below the roof to above 1.2 m heigh from finished floor level covered with 0.5 mm thk precoated sheets as per technical specification, designing drawing and standered conditons precoated sheet on the roof and 4 sides of wall above 1.2 mtr from finished level. shed contains 1)rigid frame Column web depth 350 mm x 5mmthk. and flange 250mm x 6mm thk made of build up MS plate 2) Rafter Tappered plates of varying depth 300 - 900 mm x 5mm thk plate and flange 250mm wide with min 5 mm thk.made up of MS plate 3) Purlins Z section of 200mm x 1.5 - 1.8mm thk cold form section 4) Girts Z section 200mm x 1.5mm -1.8mm thk cold form section (make- jindal,essar, tata) Note- The Section given in the item is minimum. However, the bidder shall design for the PEB shed as shown in drawing. The design shall confirm to respective I.S. Codes. The bidder shall provide designs, drawings and calculations before award of the work. The bidder has to provide Stability Certificate duly signed by registered Structural Engineer. If bidder failing to submit Stability Certificate the bill for structural steel work will not be paid by University.

Providing and fixing chicken mesh jali (24 gauge) at the junction of 2 different surfaces of different material component at the time of plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and lifts etc. complete. Spec. No.: As directed by Engineer in charge. Ground Floor Quantity

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using 1 Kg of water proof compound per bag of cement including levelling curing etc. complete. Spec. No.: As directed by Engineer in charge. Ground Floor Quantity

Providing and fixing European type wall hung white water closet of parriware / Hindware with push valve concealed type with cover plate 32 mm size of JAGUAR make Series FLV 1095 including soil pipe, vent pipe, upto outside face of wall, 100 mm dia G.I. Plug bend inlet pipe all fittings, cuttings and making good walls, floor etc. complete.

Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x 45cm size including Bib cock stop tap brass heavy 15mm, brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Ground Floor Quantity

Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) Spec. No.: Specfications Ground Floor Quantity

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. com-plete. Spec. No.: As directed by Engineer in charge. Ground Floor Quantity

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. com-plete. Spec. No.: As directed by Engineer in charge. Ground Floor Quantity

Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No.: Bd.V.41, Page No. 573

Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No.: Bd.V.41, Page No. 573

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Spec. No.: Bd.V.38, Page No. 572

Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with R.C.C. Cover. Spec. No.: Bd.V.43, Page No. 574

Providing and fixing 25 mm. dia Ball cock medium type with PVC float including sockets & necessary fittings and tested as per municipal requirements etc. complete. Spec. No.: As directed by Engineer in charge.

Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.: Bd.V.9 Page No. 555 Ground Floor Quantity

Providing and fixing H.D.P container Syntex/Plasto make Double moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters Ground Floor Quantity

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Providing and laying ceramic tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 30 cm x 30 cm confirming I.S.15622/2006 (group D IIA) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing complete.(Basic Rate of Ceramic tile Rs.476/Sq.m.)Bd.M.12 Page No. 385.

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete Ground Floor Quantity

Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved Laminate 1mm thick on both faces or as directed all necessary beads,mouldings and lipping. wrought iron hold fasts, chromium plated fixtures and fastenings, chromium plated handles on both sides, and finishing with French Polish etc. complete. Spec. No.: Bd-T-34 Page No. 499 Ground Floor Quantity

Louvered window Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. Spec : As directed by Engineer In Charge Ground Floor Quantity

Providing and fixing false ceiling of plain asbestos cement sheets 4 mm thick with teak wood beadings 45 x 12 mm with frame work of teak wood battens of size 70 x 60 mm at 1.00 M center to center including scaffolding, if necessary, all iron work and painting (visible surfaces) to A.C. sheet and beading in two coats complete (excluding T.W. runner to be paid separately). Spec : Bd.R.16, Page No. 460

Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sq.m as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Spec. No.: Bd.U.1 Page No. 537 Ground Floor Quantity