Pune University Tender

75mm Thick (half height/full height/Jumbo height) Birla Aerocon Panel partition (Hyderabad Industries Limited): Providing and fixing in position (half height/full height/Jumbo height) 75mm thick Birla Aerocon Panel partition (Hyderabad Industries Limited) sandwich panel made of two reinforced cement facing sheets on either sides of a light weight concrete core, fibre reinforced cement facing sheets are of 4mm thickness with recess edge to be fixed with tongue & groove joining system with panel size of (2400 x 600 , 2700 x 600, 3000 x 600) as per requirement (with tolerance L,W & T) + 1mm weight 59 kg/m2 . Item to include floor & ceiling channel to be fixed with self expansion screws of size 6 x 60mm at every 600 mm c/c on 75mm face of channel & sodium silicate & fly ash paste/ polyuretheme foam as per requirement.Fixing of Aerocon panels to Aluminium angle with self tapping screws at every 300mm c/c & fixing of beading for top end & free end.Necessary transportation & handling of material on third floor. Note:- 1) The partition to be installed strictly as per the guidelines & specficiations mentioned for installation procedure in technical manual of Aerocon Panels (C.K Birla Group & Hyderabad Industries Limited) 2) The special care is to be taken for jumbo height partition with staggered joint (min 1500 mm ) as mentioned in Aerocon panels company manual also for fixing half height/ full height partition also for T & L junction, lintel panels for doors, fixing of doors & windows, fixing of door frames & window frames 3) All the necessary grout, binding compound are to used of Birla Aerocon make only & mixing as per standard procedures & guidelines of company 4) The support & coordination for necessary additional M.S. Fabrication work which is required for installation as mentioned in Aerocon Panel manual will be paid in structural steel item. 5) The contractors will have to provide shop drawings & joining details before starting the work for approval. 6)The cost of cutting of necessary electrical conduits & filling gaps with cement mortar is included in the item etc complete. 7) The Contractor shall provide official approval from Aerocon panel company, regarding installation work of Aerocon panel partition executed as per guidelines mentioned in Company's manual.

Providing and Fixing 40 mm Foot Valve of brass for pumps etc complete. Spec. No: - As directed by Engineer in charge

Executive Table:- Providing and supplying Executive Table in Complete plywood with two colour laminate combination with modesty and side runner. Please Specify Side Runner Left Hand Or Right Hand. Size 1) Table :- 1800 mm (Length) x 900 mm (Width ) x 750 mm (Hieght) Side Runner:- 1800 mm (Length) x 450 mm (Width ) x 625 mm Spec. No: - As directed by Engineer in charge

Café Table:- Providing and supplying Café Table with laminated top of 25 mm thick ply, edges finished with PVC edge banding, frame in Stainless Steel with center pipe of 75 mm diameter & bottom plate of MS base plate covered with Stainless Steel plate of 1.2 mm. 1000 Diameter X 1050 Height. Spec. No: - As directed by Engineer in charge

Rectangle Table:- Providing and Supplying Rectangle Table in Stainless Steel square pipe frame of 25 mm x 16g. Top & bottom with smoke glass with polished edges of 12 mm thick. Sizes : 900 mm Width x 600 mm Depth x 1020 mm Height Spec. No: - As directed by Engineer in charge

VIP Tip-up Theatre Chair :- Providing and supplying VIP tip-up theatre chair seat & back with veneered moulded ply. PU moulded foam in seat & back, armrest in wood duly polish, provision of writing pad within the arm, writing pad in BSL. Size :- 650 mm Length x 650 mm Width x 1020 mm height Spec. No: - As directed by Engineer in charge

Keton:- Providing and supplying keton lounge chair with fabric & rexene Metal Legs. Spec. No: - As directed by Engineer in charge

Storage cabinet :-Providing and supplying Storage cabinet in 18 mm plywood with 2 door BSL. Sizes : 800 mm Width x 450 mm Depth x 1200 mm height. Spec. No: - As directed by Engineer in charge

Storage cabinet :-Providing and supplying in plywood with 2 door combination of glass and aluminium frame. Sizes : 800 mm Width x 450 mm Depth x 1200 mm height. Spec. No: - As directed by Engineer in charge

Fine Dine chair with Arms:- Providing and supplying Fine dine chair with arms in solidwood teak frame completely poslished, cushion in seat & back. Size : 580 mm Width x 550 mm Depth x 900 mm Height Armrest 40 mm - Seat 500 mm. Bottom to seat height 470 mm. Spec. No: - As directed by Engineer in charge

Training Room Chair:- Providing and supplying Training room chair with 12 mm thick moulded ply & cushion on seat & back, frame in M. S oval pipe of 16g duly powder coated, half writing tablet in BSL with edge banding. PU cladding on both side Arms. Spec. No: - As directed by Engineer in charge

Teacher Table :- Providing and supplying Teacher table top of 25 mm thick plywood with laminate on top & white balancing laminate below & Side Edges finished with PVC Edge banding , table shall have wire management system, accessible from the table top on the horizontal surface, flip top to the flush of work surface, frame in Stainless Steel 40 mm square pipe. Size : 1800 mm Width x 1200 mm Depth x 750 mm Height Spec. No: - As directed by Engineer in charge

Fix Stackable Chair:- Providing and supplying Fix stackable chair Chair in M.S. duly powder coated. Frame in 22 mm round pipe & back in 12mm ply duly cushioned. Size:- 800 mm Width x 450 mm Depth x 1200 mm Height Spec. No: - As directed by Engineer in charge

Medium Back Chair :- Providing and supplying Medium back chair frame in moulded Nylon PP with back mesh, PU moulded cushion on seat, PP lumber support, fix arms & Nylon base, Synchronized mechanism with single lock & Gas Lift. Spec. No: - As directed by Engineer in charge

Conference Table :- Providing and supplying Round conference table top of 25 mm thick plywood with laminate on top & white balancing laminate below & Side Edges finished with PVC Edge banding , table shall have wire management system, accessible from the table top on the horizontal surface. Flip top to the flush of work surface. Frame in Stanless Steel round pipe of 50mm Tapered Legs fixed with Stanless Steel frame below top. Size:- 1200 mm diameter x 750 mm height Spec. No: - As directed by Engineer in charge

Six Seater:- Providing and Supplying Six Seater with pedestal linear sharing modular workstations which includes partition, work gable ends will be in in 25 mm thick plywood with 2 mm thick PVC imported edge banding tape for tops & 0.8mm thk PVC imported edge binding tape for verticals. The bottom surface of the table shall also be laminated. The worktops will be supported by MS powder coated brackets at regular intervals. The worktops shall be provided with PVC wire manager for cabling. Partition thickness will be 28 mm and hight 1200 mm. Size:- 3000 mm Length x 1200 mm Width x 750 mm Height Spec. No: - As directed by Engineer in charge

Lazzaro Bench Type Sofa :- Providing and supplying a bench type sofa with backrest fully cushioed . Base frame in mild steel 40mm square pipe of 16g duly powder coated & leg at the base. Size:- 1500 mm Width x 600 mm Depth x 400 mm Height with centre table. Spec. No: - As directed by Engineer in charge

Two Seater Medium Back Tandem:- Providing and supplying Two seater medium back tandem in Stainless Steel frame. Shell:- Bent wood shell in 18 mm hick with both side,Veneer duly polished. Frame:- Supported by Horizontal beam 50 mm x 25 mm x 1.6 mm thickness in rectangular S.S. 304 Grade. Buffed in Matt finish. Base:- Vertical flat S.S. 304 grade 40 x10 mm thick & base legs in Stainless Steel flat of 40 x 10 mm thick in Matt finish. Bush:- Bottom base fitted in PP Bush, arm rests:- Flat S.S. 40x10mm thickness Buffed in Matt finish (Arms at Ends) Option:- With cushion on Seat. 500 length x 520 mm back height x 500 depth. Spec. No: - As directed by Engineer in charge

Waiting Lounge Three Seater Tandem :- Providing and supplying waiting lounge three seater tandem with cushion metal tandem with PU injection foam, paddings with two arms at the end. MS Legs at the base. Spec. No: - As directed by Engineer in charge

Pedastal :- Providing and supplying Pedastal (3Drawers) : 400 mm Width x 450 mm Depth x 700 mm Hieght Spec. No: - As directed by Engineer in charge

Reception Table:- Providing and supplying Reception Table top of 25 mm thick plywood with laminate on top, High front desk with 12 mm Glass Top Table Size:- 1500 mm (Length) x 1200 mm (Width) x 1200 mm (Height) PP pencil tray inserted. Desk Sizes : (Length x Width x Height) 650 mm X 450 mm X 800 mm Chair Small Size : ( Length x Width x Height) 420 mm X 450 mm X 500 mm Spec. No: - As directed by Engineer in charge

Rectangle Table:- Providing and supplying Table Frame in M.S 25 mm thick square pipe duly powder coated & cladded with granite top 16 to 18 mm thick, sides are covered with 12 mm thick plywood finished with laminate. Size : 1800 mm lenght X 600 mm depth X 750 mm hieght Spec. No: - As directed by Engineer in charge

Combination of books storage:- Providing and supplying Combination of books storage in 18 mm plywood with Laminate in single Colour. Size : 1200 mm Width x 450 mm Depth x 900 mm height. Spec. No: - As directed by Engineer in charge

Versatile:- Providing and supplying Versatile lockers in MS Sheet having ventilating louvers staple padlocking arrangement nad label holder. Size : 1000 mm Width x 450 mm Depth x 1950 mm height Individual Locker Size:- 305 mm Height x 305 mm Width x 430 mm Depth in built. Spec. No: - As directed by Engineer in charge

Revolving Stool :- Providing and supplying Revolving stool with cushion in seat, PP base with castors & manual height Adjustment 450mm height. Spec. No: - As directed by Engineer in charge

Library :- Providing and supplying Library modular wall Unit having open storage shelving all in 18 mm plywood with laminate. Size : 900 mm Width x 300 mm Depth x 1800 mm height Spec. No: - As directed by Engineer in charge

Progress Pinup Boards OR White / Green Writing :- Providing and supplying Progress Pinup Boards OR White / Green Writing magnet, core material 12mm plywood. Back side 1.0 mm thick galvanized and heavy anodized aluminum frame with ABS chrome plated corner. Portable Frame with Castors. Sizes:- 1500 mm x 750 mm Spec. No: - As directed by Engineer in charge

Progress White / Green Writing Boards :- Providing and supplying progress white / green writing boards laminate coated surface sheet for writing with marker & magnet, core material 12 mm plywood, back side 1.0 mm thick galvanized and heavy anodized aluminum frame with ABS chrome plated corner. Portable Frame with Castors. Sizes:- 1500 mm x 750 mm Spec. No: - As directed by Engineer in charge

High Rise Swivel Chair :- Providing and supplying High rise swivel chair Cushion in seat & back, Stainless steel seand with ring type footrest & castors & gas lift. Sizes:- 1500 mm x 750 mm Spec. No: - As directed by Engineer in charge

PODIUM:- Providing and supplying PODIUM 18 mm thick plywood finished with laminate 1.0 mm thick with storage, with castors for easy movement. Size: - 600 mm Width x 450 mm Depth x 1000 mm Height Without Mic. Spec. No: - As directed by Engineer in charge