Pune University Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Pune University - UOFP Tender
Eprocure
Opening Date10 Jan 2024
Closing Date2 Feb 2024
Tender Amount₹ 1,86,90,525
Costs
EMD
₹ 1,87,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Modification And Upgradation Work Of Set Examination Department At Savitribai Phule Pune University.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UOFP_982067_1Bid Award Id
ViewTender No
C.A.No.2023-24/SPPU/ ESTATE/EE/ CIVIL/27Tender Authority
Pune University ViewPurchaser Address
-Website
http://www.unipune.ac.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc. complete.
1
-
986.3
Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.
30
-
165.45
Removing Aluminium Partition with frames and stacking the materials as directed with all leads, lifts etc.
125
-
100
Removing ventilators and small windows with frame and stacking the materials with all leads lifts etc. complete.
50
-
140
Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete
500
-
47.7
Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all leads, lifts etc. complete.
30
-
23.35
Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. Note : Following items to be executed after prior approval of Superintending Engineer.
125
-
55.15
Removing Urinal Pans or Wash hand basin with frame including disconnecting the sanitary and water supply connections. removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials out side etc. complete.
10
-
101.8
Removing W.C. Pan including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the service-able materials as and where directed including throwing the unserviceable materials out side etc. complete.
5
-
219.5
Removing wooden or A.C. partition including frame work and stack-ing the materials as with all leads, lifts etc. complete.
100
-
44.54
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.... Spec: (As Directed By Engineer Incharge)
15
-
225.6
Raking out joints & pointing of stone masonry /cladding filling the gap with lime mortar in proportion 1:1:5 i.e.. White cement : lime : stone dust with required qty. of water pigments to match existing sheds and texture of stone including double scaffolding, cleaning the crack or joints or as directed by Engineer Incharge etc. complete....
300
-
734.85
Providing and applying approved silicon silaxane coating to existing stone masonry façade against fungus, moss growth including double scaffolding, curing, cleaning etc. complete.
100
-
547.65
Cleaning the external surface of walls using high pressure water jet pressure more than 100 bars to remove algae, fungus growth, flakes of stones including double scaffolding, water protection of window panes by covering the windows with 6mm plywood, covering the electrical cables, decorative and ornamental plaster with plastics or any suitable material etc. complete.
15
-
736.2
Providing & fixing in position, full height partly glass panelled & partly solid partition made of treated Teak wood framework of size 50mm x 50mm having grid spacing at 900mmx 450mm centre to centre both ways & covered with 12 mm thick approved plywood on both sides of framework & finished with 1mm thick laminate of approved color and texture. The framework shall be properly screwed to the walls, ceiling and floor and plywood shall be screwed to the framework. plain Glass and texure glass of thickness 5 mm will be fixed as per design with wooden beading of size 38mm x 12 mm on both sides. Wooden beadings will be finished in three or more coats of melamine polish (glossy/matt) with 12 mm x 6 mm groove in each panel.Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. as per the drawing, specification as directed by the Engineer incharge etc complete
50
-
9453.6
Providing & fixing in position, full height solid partition made of C.C.Teak wood framework of size 50mm x 50mm having grid spacing at 900mmx 450mm centre to centre both ways & covered with 12 mm thick approved plywood on both sides of framework & finished with 1mm thick laminate of approved color and texture. The framework shall be properly screwed to the walls, ceiling and floor and plywood shall be screwed to the framework. plain Glass 5 mm thick and texure glass of 5 mm thick will be fixed as per design with wooden beading of size 38mm x 12 mm on both sides. Wooden beadings will be finished in three or more coats of melamine polish (glossy/matt) with 5 mm x 5 mm groove in each panel.Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. as per the drawing, specification As directed by Engineer Incharge etc complete.
10
-
9082.65
Cleaning the external surface of walls using Steripure S30 to remove algae fungus growth , flakes of stone including double scaffolding, as directed by engg, in charge etc. complete.
100
-
187.5
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
1
-
9746.4
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.
500
-
95.45
Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.
25
-
224.95
Providing internal cement plaster 20mm thick in single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.
50
-
436.95
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete
50
-
313.9
Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete
1020.2
-
811.3
Providing and filling crack filling material to conealed existing crack at any location by Dr. Fixit crack filler
450
-
55.55
Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.
400
-
60.45
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
100
-
719.7
Providing & Fixing Soild core hot pressed , phenol formaldehyde bonded boiling proof 40mm thick marine plywood door frame Citicom 710 / Green Club 500 / CPL 710 or equivalent make on both side gypsum face, seasoned calibrated & chemically treated as per IS 710 standard one side laminate of approved colour shade & design and width i/c fixing as per manufactures specification all and Hilti fastner 100mm long 10 nos each side embedded in masonry including 75x12 mm marineply cover mould with teak wood lipping on both sides etc. complete as per direction of Engineer in Charge. Size = 300mm x 40 mm
25
-
1817.8
Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete
0.5
-
212153.05
Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete
5
-
10119.3
Providing and fixing in position Fibro Plast Door Single Shutter (The rate is including all hardware and Fixtures)
5
-
5555
Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.
10
-
3472.1
Design fabrication supply and installing of semiunitised structural glazing with SGU Glass 8 mm thick and allied work cleaning etc complete.(Inluding Scaffolding) As directed by Engineer in charge
10
-
10605
Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box
25
-
5834.9
Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box.
11.02
-
5810.5
Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineer-in-charge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. b) With powder coating Note - While arriving at the rate of item of item weight at 6.90 kg/Sqm is considered.
41.77
-
6662.05
Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.
1.98
-
3676.75
Providing tuck pointing with cement mortar 1:3 for stone/Brick masonry including scaffolding and curing etc. complete.
830.59
-
189.85
Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete.
25
-
196.85
Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. Note While arriving at the rate of item of item weight at 6.90 Kilogram/ One Square Metre is considered.
33.39
-
5800
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.
5
-
1119
Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.
25
-
4651.35
Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.
5
-
4295.5
Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.
5
-
763.55
Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.
5
-
1350.5
Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Flooring
50
-
158
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.
5
-
1695.15
Supply & Fixing of Full Body Vitrifid Steptiles Ready to install Treads and Risers 16 mm thick, required width and required finish in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. with prior approval of concerned Superitending Engineer.
10
-
3022.45
Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. Complete. A) Flooring
15
-
1273.7
Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. Complete.b) Skirting
5
-
1353.2
Providing and laying glazed vitrified tiles having size 1200 x 600 mm / 800 x 800 mm / 1200 x 1200 mm of 8 to10 mm thickness and confirming to IS. 15622-2006 of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Ground Floor Quantity
521.7
-
1767.5
Providing and laying glazed vitrified tiles having size 1200 x 600 mm / 800 x 800 mm / 1200 x 1200 mm of 8 to 10 mm thickness and confirming to IS.15622-2006 of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete Ground Floor Quantity
35
-
1868.5
Providing and laying ceramic tiles having size 30 cm x 30 cm confirming I.S.15622/2006 (group D II-A)and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. Complete.
39.21
-
1281.55
Providing and laying ceramic tiles having size 30 cm. X 30 cm. For dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. Complete.
10
-
1356.4
Providing and laying ceramic tiles having size 30 cm. X 45 cm. For dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. Complete.
76.63
-
1380.8
Providing and laying ceramic tiles having size 30 cm. X 60 cm. For dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. Complete.
5
-
1501.7
Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.
40
-
38.2
Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding etc. complete.
70
-
39.25
Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels.Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for duct finishing of joints cut outs, painting including labour, material, lifts etc. all complete.
100
-
1876
Providing and applying two coats of exterior white weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary
25
-
312.85
Providing and applying 2 coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) complete.Spec. No.: Bd.0.7 Page No. 406
20
-
112.41
Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.
50
-
50.9
Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete.
50
-
229.1
Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface including the priming coat on concrete / masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required & including two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.
50
-
163.2
Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.)
1083.44
-
318.15
Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets & necessary fittings and tested as per municipal requirements etc. complete. First
2
-
1283.2
Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres.
3000
-
11.7
Removing chockes and leakages from down take G.I/CI/PVC pipe line on walls floor level by using zoola / scaffolding and rectify the same for functioning with all lifts etc. complete.
5
-
331.95
Providing and laying in walls/ceilings/floors 15 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 1.25 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
100
-
392.4
Providing and laying in walls/ceilings/floors 20 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 1.63 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete
10
-
441.2
Providing and laying in walls/ceilings/floors 25 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 2.49 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete
100
-
506.9
Providing and laying in walls/ceilings/floors 32 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 3.20 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete
50
-
609.8
Providing and laying in walls/ ceilings/floors 40 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 3.68 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
25
-
676.6
Providing and laying in walls/ceilings/floors 50 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 5.17 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
25
-
854.75
Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)
12
-
605.55
Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
5
-
282.1
Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
5
-
328.75
Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
12
-
397.7
Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.)
34
-
457.1
Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
9
-
571.6
Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
21
-
785.85
Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment)
20
-
603.4
Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete
5
-
643.7
Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.
5
-
835.7
Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete
5
-
575.7
Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
5
-
616.45
Providing and fixing 25 mm dia ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete. Spec. No: - As directed by Engineer-in-charge
25
-
717.1
Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets & necessary fittings and tested as per municipal requirement etc. complete.
20
-
516.45
Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
5
-
678.7
Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
6
-
931.12
Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
3
-
1241.85
Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete.
1
-
2113.6
Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall
3
-
10365.35
Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32mm diameter P.V.C. flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.
1
-
11019.65
Providing, Supplying, Fixing, testing and commissioning of Heavy class SS grating of approved design including setting in floor with cement motor to match with floor finish as per architect requirement. (C.P. & Sanitary fittings are as per approved item & make list). a) 125 mm dia for floor trap b) 125 mm dia for Urinal trap (Close on top)
3
-
555.5
Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.
4
-
994.45
Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.
1
-
4249.4
Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete.
2
-
7835
Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge.
4
-
21092.3
Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.
3
-
2544.15
Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete.
8
-
1723.3
Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete
1
-
1175.05
Providing and fixing European type wall-hung white water closet of Paryware / Hindware or equivalent make with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cutting& making good walls, floors etc. complete.
2
-
15935.1
Providing, Supplying, Fixing, testing and commissioning of Health faucet with built in filter and 1 m length of pvc flexible pipe with wall hook. (similar to Constellation Jaquar cat. No-563)
5
-
1364.75
Providing and making Holes (Core cutting ) in chajjas and slab for passing the pipe line. Spec. No: - As directed by Engineer in charge
10
-
649.95
Providing and making Holes (Core cutting ) in U.C.R. wall for passing the pipe line. Spec. No: - As directed by Engineer in charge
10
-
1472.1
Material Shifting by truck Spec. No: - As directed by Engineer in charge
35
-
950
Mazdoor, Unskilled Heavy Male/Female Spec. No: - As directed by Engineer in charge
15
-
615
Providing Plumber with tools - Skilled Spec. No: - As directed by Engineer in charge
5
-
710.85
Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. Complete
37.15
-
456
Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) (As directed by Engineer in Charge)
142.53
-
441
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.
100
-
1359.4
Wooden Partitions full height - Providing & Fixing in position 3" thk. wooden partition, including 2"x2" Salwood frame work and covering with 6mm. ply & 1.0 mm. thk laminate on both sides/ 3 mm thk MDF, insertion of T.W. member whereever necessary, cutting of holes to partition, provision for electrical conduits, 6mm. ply for skirting with 1.5 mm. laminate covering of approved colour & shade, providing additional angle supports wherever necessary for standalone partitions and additional strengthening wherever necessary,including luster paint of approved shade if MDF is applied wherever / all over as applicable etc item complete.
158.93
-
9090
Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.
4.2
-
3265.3
Providing and fixing in position glass door (900x2100) or specified size of 12mm thick toughened glass of Modigaurd or equivalent alongwith the holes required for fising fittings, including floor hinges of ozone or equivalent, top/bottom patch fitting, patch lock and top pivot fitting including scrapping for fixing the floor hinge, cleaning , including application of froasted films as per pattern given by architect etc complete, (900x2100) of 12mm thick toughened glass of Modigaurd or equivalent alongwith the holes required for fising fittings, including floor hinges of ozone or equivalent, top/bottom patch fitting, patch lock and top pivot fitting including scrapping for fixing the floor hinge, cleaning , including application of froasted films as per pattern given by architect etc complet
11.34
-
30000
Providing Glass in Partiotion with D brackets
15.75
-
3030
Wooden Partitions Part height - Providing & Fixing in position 3" thk. wooden partition, including 2"x2"Salwood frame work and covering with 6mm. ply & 1.0 mm. thk laminate on both sides/ 3 mm thk MDF, insertion of T.W. member whereever necessary, cutting of holes to partition, provision for electrical conduits, 6mm. ply for skirting with 1.5 mm. laminate covering of approved colour & shade, providing additional angle supports wherever necessary for standalone partitions and additional strengthening wherever necessary,including luster paint of approved shade if MDF is applied wherever / all over as applicable etc item complete.
10.8
-
8585
Providing & Fixing in position, Fabric wrapped Compressed polyester fibre nonwoven 9mm panels above the wood wool board panelling or existing sal wood frame, using adhesive, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour,finishing etc complete
26.45
-
3128.5
Toughened glass partition works: The scope of work includes Providing, supplying, fabrication and installation or fixing of toughened glass (10-12m thick) to the various locations with the accessories like powder coated aluminium fish mouth channel at top & bottom, labour, distance between two glass panels not exceed 2mm to 4mm, sealing of gap filling (wall to glass magnetic seals, glass to glass central weather seals etc clear PU sealant or silicon), etc. (at all level/floors/height) which are necessary for completion of job as directed by
engineer in charge.
13.23
-
5000
Providing and fixing table of size 1950 x 900 and side table of size 1050x 500 or as specified in drawing. made out of 19 mm ply, edges provided with 75 mm wide 19 mm ply with vertical supports and apron, all exposed surfaces finished with 4mm natural wood veneer melamine polished. Internal surfaces to be provided with laminate. The edges to be finished with TW lipping and finished with melamine polish. The main table as well as side table should have 400 wide storage each with two drawers made out of 12 mm plywood and front made out of 19 mm ply and a trolley made out of 19 mm ply. The side table should be provided with 650/700 x 300 wide keyboard drawer made out of 19 mm ply. The drawers to be provided with telescopic channels and trolley with 40 mm castors. The furniture to be made as per the drawing and hardware to be used as mentioned in the list of approved makes including filling the gaps and finishing, cleaning etc complete.
7.08
-
30215.06
Providing & Fixing Modular / Plywood storage unit of different sizes as follows having 19mm. ply, shutters, brass hinges of approved make, covered with 1.50 mm laminate, magnetic ball catches, all internal surfaces oil painted, all edges finished with 1 mm laminet etc. complete as per detailed drawing & design
1. 1.4x0.75x0.57
2.3.50x0.38x2.10
3.3.90x0.38x3,
4. 2x0.40x0.75
5.1.2x0.5x0.75
6. 0.77x0.75x0.75
7.2.5x0.33x2.11 or Size specified in drawing
54.57
-
20200
Providing & Fixing Discussion tables of size 2000x900 or any other specified size with necessary supporting system , top with 19mm.plywood edges thicked with another 75 wide 18mm. ply to give thickness. 40mm covered with laminate 1.5mm of approved colour and necessary provision to fix switches & power point as directed on site etc. (As Per - modular furniture - Godrej Interio / wipro or equevalent make ) Firstor ( Mode of Measurement should be top area of Table)
30.14
-
22380
Providing and fixing table of size 1500 x 750 and side table of size 900x 450 or as specified in drawing made out of 19 mm ply, edges provided with 75 mm wide 19 mm ply with vertical supports and apron, all exposed surfaces finished with 1.5 mm laminate. Internal surfaces to be provided with laminate. The edges to be finished with TW lipping and finished with melamine polish. The side table will have storage each with two drawers made out of 12 mm plywood and front made out of 19 mm ply and 2 sliding shutters made out of 19 mm ply. The main table should be provided with 650/700 x 300 wide keyboard drawer made out of 19 mm ply. The drawers to be provided with telescopic channels. The furniture to be made as per the drawing and hardware to be used as mentioned in the list of approved makes including filling the gaps and finishing, cleaning etc complete.
19.15
-
28600
Providing and fixing Godrej or Equivalent make optimiser as per specifications as follow APO Optz Plus SD4
Overall Dimensions of SD - 4 Single Static Drive Cover Unit 4 Bay(U/C + Fittings + Cover) shall be 4800mm(W)x400mm(D)x2121.5mm(H).
The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units (1,2,3,4) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 . Uniformly distributed load capacity of 100Kg . Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick conforming to IS:2062.The Movements shall be Drive Type configuration : In case of D4 movement of units is achieved mechanically through a Drive Wheel and Sprocket -Chain-Tensioner arrangement mounted rigidly onto body size .For D4 each movable undercarriage shall be provided with 4 rollers on the shaft for driving ,4 antifriction ball bearing for rolling and LD has 2 anti-tilt bearing
assembly.The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast
steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips.
This entire roller assembly is then snap-fitted into a wheel housing. The wheel housing is fixed in the U channel of the understructure using machine screws. This wheel-housing is made of engineering plastic material made by injection-molding process. The entire roller assembly is designed to withstand the maximum loads of the body.Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together. When the last unit is twin movable , hinged doors are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover. Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment . Door locking shall be having hinged doors of recessed die cast handle cum lock giving 3 way locking through a lever & shooting bolts. Also total no. of loading levels per understructure shall be 20 for SD4. The nuts & bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per understructure shall be 30 for
TD3. Label holder - It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-300 micron polythene is to be inserted.TD units are designed with tie rod assembly options as well. it acts as a substitute to the back panels (only in twin body) if the customer chooses to not have back panels. The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’ between two opposite shelves. The tie rods are made of 4mm diameter rods of MS while the fixing brackets are made of 2mm thk. CRCA Steel conforming to IS: 513 Gr.D. This
assembly is available for both heights – 1980H and 2361H.
1
-
126350.88
APO Optz Plus LD4 Overall Dimensions of LD4 Single last Drive Unit 4 Bay(U/C + Fittings + Cover) shall be 4800mm(W)x400mm(D)x2121.5mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units (1,2,3,4,5) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 100 Kg . Undercarriage shall have construction in welded frame made of HR sheet
3 mm thick conforming to IS : 2062. The Movements shall be Drive Type configuration : In case of D2,D3 & D4 movement of units is achieved mechanically through a PU Drive Wheel and Sprocket -Chain-Tensioner arrangement mounted rigidly onto body size. For D4 each movable undercarriage shall be provided with 4 rollers on the shaft for driving , 4 antifriction ball bearing for rolling. LD understructure has 2 nos. of antitilt bearing assembly. The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is nmade of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing. The wheel housing is fixed in the U channel of the understructure using machine screws. This wheel-housing is made of engineering plastic material made by injection-molding process. The entire roller assembly is designed to withstand the maximum loads of the body. Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together. The Recess handle lock is of Godrej make & placed at suitable height .The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. The PU handwheel is rigidly fixed at suitable height on side of the body & projects out of cover by another 99.0 mm. Fixed unit (SD) does not have the Drive Unit Cover. When the last unit is twin movable, hinged doors as accessories are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover; and with tile fascia option, it will be mounted in the recess of vertical trim. Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment.The nuts & bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per understructure shall be 20 for LD4. Label holder - It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted.
1
-
190540.78
APO Optz Plus TD4 Solid back panel Overall Dimensions of TD4 Twin Drive Unit 4 bay(U/C + Fittings + Cover) shall be 4800mm(W)x800mm(D)x2121.5mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units (1,2,3,4,5) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 100 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick conforming to IS : 3062. The Movements shall be Drive Type configuration : In case of D2,D3 & D4 movement of units is achieved mechanically through a PU Drive Wheel and Sprocket -Chain-Tensioner arrangement mounted rigidly onto body size. For D4 each movable undercarriage shall be provided with 4 rollers on the shaft for driving ,4 antifriction ball bearing for rolling. The roller assembly comprises of a diecast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snapfitted into a wheel housing. The wheel housing is fixed in the U channel of the understructure using machine screws. This wheel-housing is made of engineering plastic material made by injection-molding process. The entire roller assembly is designed to withstand the maximum loads of the body. Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together. The Recess handle lock is of Godrej make & placed at suitable height .The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1302mm x 398mm x 87mm and is fixed onto the side of the body. The PU handwheel is rigidly fixed at suitable height on side of the body & projects out of cover by another 99.0 mm. Fixed unit (SD) does not have the Drive Unit Cover. When the last unit is twin movable, hinged doors as accessories are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover; and with tile fascia option, it will be mounted in the recess of vertical trim. Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment.The nuts & bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per understructure shall be 40 for TD4. Label holder - It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-300 micron polythene is to be inserted.TD units are designed with tie rod assembly options as well. it acts as a substitute to the back panels (only in twin body) if the customer chooses to not have back panels. The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’ between two opposite shelves. The tie rods are made of 4mm diameter rods of MS while the fixing brackets are made of 2mm thk. CRCA Steel conforming to IS: 513 Gr.D. This assembly is available for both heights – 1980H and 2361H.
4
-
257365.78
APO Optz Plus D4 CHNL 800mm
1
-
18788.25
APO Optz Plus D4 CHNL 1600mm
1
-
31555.75
Providing and fixing 12 mm thick soft board of different sizes as specified in drawing covered with a fabric (base rate 300/rm) on a base of 12 mm think plywood finishing the same with 2 no - 100 mm wide horizontal members of 19 mm waterproof ply finished with laminate and polishing the edges and lipping with french polish, including making arrangements for fixing lights, passing conduits, fixing switches etc as per design complete
25.02
-
2630
White board Providing & fixing in position whie board of diffrent sizes as specified in drawing made out of 19 mm ply and 1.5 mm laminate - non glossy, marker grade including TW lipping on all sides finished with duco paint, including providing 0.6 mm laminate from back side cleaning etc all complete as per drawings.
25.02
-
4444
Roller BLINDS P& F roller blinds of Vista Levolor / MAC make with 100% opacity with necessary fixing and operating arrangement - standard quality
15.96
-
959.5
Supply of CHAIRS - type 2 for faculty and dicussion rooms - Godrej or equivalent make high back SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam.SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns)tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm (W) x 70.5 cm (H).HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should be designed with the following features:• 360° revolving type.• 17° ±2° maximum tilt on pivot at centre • Upright position locking. Tilt tension adjustment. .PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm.TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene.PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.)TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon.Overall Dimensions of ChairSeat Height - min 43.3 to max 54.3cm.Height - min 99.5 to max 110.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.
81
-
8585
Computer Chair :- Supply of low back revolving chair with gaslift & crome platted base with nylon twin casters, 50 density moulded foam with fabric netted tapestry at seat & 15 mm Hot press ply for seat. High quality nylon mesh with nylon frame at back, pp handles, push back mechanim with fornt locking system. As directed by Engineer in Charge. (As per drawing & Specification attached on annexture
22
-
4545
Staff Chair :- Supply of medium back revolving chair, with gas lift, crome platted base with nylon twin casters, Tilting/push back mechanism with front locking system, nylon streep (Horizontal Lines) type frame with high quality nylon mesh at back moulded 50 density foam seat with fabric/leatherite uphostery at seat 15 mm hot press ply at seat with inserts for handle & mechanisum, tringle type pp handle As directed by Engineer in Charge. (As per drawing & Specification attached on annexture
21
-
5050
Waiting Chair :- Same as above, but with fixed legs and without castors
6
-
3838
Executive High Back Chair :- Supply of High Back Revolving Chair with Syanchro knee tilt mechanisum with Multiangle Locking System attached head rest to mesh nylon Frame back with 45 Density moulded foam netted tepestery Class 4 Gas Lift with Alluminium dia cast base and nylon twin Wheels. As directed by Engineer in Charge. (As per drawing & Specification attached on annexture
7
-
10605
Providing and fixing wall panelling made out of 19 mm ply box finished with 1.5 mm thk laminate amd 6 mm think lipping on exposed sides as per instructions including making holes, finsing arrangements, making provisions required for lighting , polishing the exposed edages, cleaing etc complete
28.75
-
15150
Providing & Fixing of Armstrong Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ?85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% (GW) and 74 % RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T-section flanges colour white having rotary stitching on all T-sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and aload carrying capacity of 7 Kilograms/M2 with aminimum pullout trength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 1 year warranty. products approved as per GRIHA and BS 476 etc. complete.
173.26
-
3030
Providing & Fixing of Armstrong Soft Fibre suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ?85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% (GW) and 74 % RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T-section flanges colour white having rotary stitching on all T-sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and aload carrying capacity of 7 Kilograms/M2 with aminimum pullout trength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 1 year warranty. products approved as per GRIHA and BS 476 etc. complete.
62.21
-
1666.5
Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/ fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetr perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab.The gypsum board should be fixed to galvanized iron grid with necessary screws.The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediatec hannels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.
164.11
-
1786.7
Roller BLINDS P& F roller blinds of Vista Levolor / MAC or equivalent make with 100% opacity with necessary fixing and operating arrangement - standard quality
58.99
-
1250
CHAIRS - type 1 for HOD and heads Godrej Ace or equivalent make full back with headrest
SEAT/BACK ASSEMBLY: The Cushioned seat assembly consshould be ts of seat outer (material-30% Glass Fiber Nylon)& upholstered Seat inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric. The Net Back should be made up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material- PP) and upholstered using Polyester Mesh fabric with high tenacity yarn. Full Back Size: 46.5 cm. (W) x 60.0 cm. (H) Seat Size : 51.0 cm. (W) x 49.0 cm. (D)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density = 45 +/- 2 kg/m³ and Hardness load 12 +/- 2 kgf for 25% compression. BACK SPINE: The support spine should be made up of High Pressure Die cast polished hed Aluminum.ARMRESTS : The armrest should be having two adjustment, Height (6.0±0.5cm) and Depth (6.0±0.5cm). Height adjustment should be provided in Aluminum structure of armrest which should be connected to Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be fixed to armrest structure. Armrest Top should be made up of PU molded over plastic inner.ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features:• 360° revolving type• Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort• Tilt tension adjustment can be operated in seating position• 5 position Tilt limiter giving option of variable tilt angle to the chair• Seat / back tilting ratio of 1:2• The mechanism housing should be made up of HPDC Aluminum & black powder coated (DFT 40 to 60 micron)SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 3.75±0.1 cmLUMBAR SUPPORT ASSEMBLY: The Lumbar support assembly should consist of lumbar spine (material-Glass Fiber Filled Nylon) which should be fixed to Aluminum Back spine. The Lumbar pad (material- Poly Propylene) should be fixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustment of 5.0±0.5cm.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm.PEDESTAL ASSEMBLY WITH CASTORS:The pedestal should be High Pressure Die cast polished Aluminum and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)Headrest :The neckrest assembly consshould be ts of upholstered Neckrest inner(material-PolyPropylene) with moulded Polyurethane foam and Polyster fabric.Upholstered inner should be fixed to Neckrest cover.Neckrest should be fixed to Back assembly through Neckrest spine .Neckrest assembly has height adjustment of 5.5 +/- 0.5cm and Rotation adjustment of overall 20° +/- 2°.TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter.Overall Dimensions of ChairSeat Height - min 45.5 to max 55.5cm.Height - min 95.5 to max 105.5 cm.Width & Depth of Chair as measured from pedestal - Width-75.0 cm and Depth-75.0 cm
2
-
20000
Providing and fixing table of size 2700x600,1800x600,900x600 or specified size made out of 19 mm ply, edges provided with 75 mm wide 19 mm ply with vertical supports and apron, all exposed surfaces finished with 1.5 mm laminate. Internal surfaces to be provided with laminate. The edges to be finished with TW lipping and finished with melamine polish. The main table should be provided with 650/700 x 300 wide keyboard drawer made out of 19 mm ply. The drawers to be provided with telescopic channels. The furniture to be made as per the drawing and hardware to be used as mentioned in the list of approved makes including filling the gaps and finishing, cleaning etc complete.
5
-
13095.8
Providing and fixing Glass plain 5mm with 30% labour rate SSR 29/530 (Material List)
10
-
803.4
Providing & Fixing tables of size 900 dia x 750 with necessary supporting system , top with 19mm.plywood edges thicked with another 75 wide 19mm. ply to give thickness, and supports made out of double ply of 19 mm thickness; edges finished with TW lipping and melamine polished. All surfaces finished with 1 mm laminate of approved colour and necessary provision to fix switches & power point as directed on site etc., all other edges finished with TW lipping, complete as per detailed drawings and as directed by Architect/ Engineer-in-charge. The material to be used as mentioned in the list of approved make. (Base rate for 1mm laminate-Rs 650 per Sqm)
0.04
-
8400
Providing and supplying 4.0 Ton Cassette A,C, unit 3 STAR INVERTER unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.
3
-
128920
Providing and supplying 3.0 Ton Cassette A,C, unit 3 STAR INVERTER unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.
2
-
105270
Providing and supplying 2.5 Ton Cassette A,C, unit 3 STAR INVERTER unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.
4
-
100760
Providing and supplying 1.5 Ton Cassette A,C, unit 3 STAR INVERTER unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.
1
-
66880
Providing and supplying 1.8 Ton Split A.C Daikin Make Inverter 3 Star FTKL60 unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.
1
-
45795.2
Providing and supplying 1.5 Ton Split A.C Daikin Make Inverter 3 Star FTKL50 unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.
3
-
35630.1
Installation charges for Cassette AC
10
-
5000
Installation charges for Split AC
4
-
2000
Core cutting Charges RO
6
-
1500
Material for Installation - M.S. stand for Indoor unit Cassette
10
-
1000
M.S. stand for Outdoor unit Cassette
10
-
3000
M.S. stand for Outdoor unit Split
4
-
1000
M.S. stand for Outdoor unit Split big
1
-
2800
Copper piping with Insulation Cassette
200
-
900
Copper piping with Insulation Split
35
-
820.25
Electrical Cable.
215
-
180.46
Drain Piping
215
-
131.24
Point wiring for light / fan / bell concealed type in min 20 mm PVC conduit/casing caping with 1.5 sq.mm.(2+1E) FR grade copper wires, modular type switch, earthing and required accessaries as per specification no.WG-PW/CW (light pt -15 Nos., fan pt -3 Nos, Exhaust Fan- 5)
23
-
667
Point wiring for light / fan / bell/exhaust fan Hybrid type (Surface type under false ceiling & concealed type for drops switch boards on wall.) in min 20 mm PVC conduit/casing caping with 1.5 sq.mm.(2+1E) FR grade copper wires, modular type switch, earthing and required accessaries as per specification no.WG-PW/HW (light pt -72 Nos., FP-30 Nos, bell pt-2 Nos.)( Semiconcealed Area)
104
-
488
Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW
65
-
186
Supplying & erecting modular type electronic step regulator two module ISI mark approved make duly erected on provided plate and box with wiring connections complete. As per Note: Add Rs.57/- provision of additional two modules for box and double plate
33
-
446
Point wiring for Plug on board with switch socket concealed type and copper wiring, earthing and modular accessories as per specification no.WG- PW/CW. ( 6 Amp. socket + 6 Amp. Switch) (Con plug )
29
-
505
Point wiring for independent plug concealed type in min 20 mm PVC conduit with 1.5 sq.mm FR grade copper wires with modular type switch and socket and required accessaries as per specification No. WG-PW/SW (sep plug-4 nos, wall fan-1no,)
5
-
721
Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. ( For all 2P on table)
36
-
74
Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete. ( For all 2P on table)
36
-
119
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. ( For all 2P on table)
18
-
316
Supplying and erecting ISI mark modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete.( for Power Plug Socket-8)
8
-
140
Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.( for Power Plug Socket- 8)
8
-
174
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. ( For AC near AC unit- 7nos)
7
-
215
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement morter / POPas per required to match the background in an approved manner. (Power plug)
8
-
264
Supplying and erecting ISI mark modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete.(for AC)
7
-
192
Supplying & erecting modular type Telephone socket one gang with safety shutter ISI mark approved make duly erected on provided plate & box with wiring connections complete.
16
-
93
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. ( For telephone-16nos, RJ 45 Socket-20Nos)
36
-
214
Supplying & erecting telephone cable 2 pairs of 0.5mm dia. laid in 20 mm PVC conduit as per specification No.WG-TW.
240
-
100
Supplying & erecting & commissioning junction box suitable for 20 pairs as per specification No. WG-TW. (GF)
1
-
821
Supplying & erecting jelly filled armoured cable 10 pairs with 0.5 mm dia. laid in provided trench/Pipe as per specification No.WG-TW. (approximate length.)(Incoming phone Line)
50
-
148
Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount unit as per specification complete.
16
-
794
Supplying and fixing tool-less Information Outlet (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO (RJ-45 socket)
20
-
470
Supplying & Fixing Pop -up Boxes of Matt Aluminium with provided wiring. ( similar to legrand Cat no.654014) (Confernce Room)
2
-
3140
Supplying & installing UTP networking Cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC
300
-
48
Supplying, erecting, testing and commissioning ceiling Mounted speaker
9
-
1500
Supplying, erecting, testing and commissioning of 1.5 sq mm speaker wire complete.
60
-
68
Supplying, erecting, testing and commissioning amplifier 120 W for public address system suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete
1
-
17999
Supplying & erecting XLPE Armoured cable 2 core 1.5 sq.mm Copper complete erected on wall /ceiling as per specification no.CB-LT/CU
80
-
102
Supplying, erecting & testing optical type Smoke detector complete on box as per specification No.FF-FAS/SD
33
-
1819
Supplying and Fixing of indoor type IP Cameras. 3.6mm HD Dome type (1Megapixel) (IP base)
10
-
2850
Supplying and fixing of Cat 6 Lan Cable with suitable size PVC concealed conduit from Cameras to NVR and or Monitor.
110
-
90
Supplying & fixing of 16 port NVR for camera system.
1
-
15000
Providing and installing 2TB WD Purple Hard disk for Recording and backup upto 72hrs.
1
-
4500
Providing and installing Monitor with HDMI port
1
-
10000
Providing 10A Power Supply
1
-
800
Supplying & fixing POE Networking Switch 16 port
1
-
10000
Supplying & erecting HMS PVC conduit 20 mm dia. With PVC accessoaries on wall /ceiling as per specification No. : WG-MA / CON, (If required for any other purpose)
100
-
76
Supplying & erecting HMS PVC conduit 32 mm dia. With PVC accessoaries on wall /ceiling as per specification No. : WG-MA / CON,
75
-
132
Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/Bus bars or any other places as per specification No: WG MA/BW. ( passage mains)
(Supplying & erecting mains with FR, flexible copper PVC insulated wire of following size, 1.1KV grade with ISI mark laid in conduit / trunking / inside pole / Busbars or any other places as per specification No.WG-MA/BW.)
70
-
40
Supplying & erecting mains with 2 X 1.5 Sq.mm.& earth wire 1.5 sq.mm FR copper PVC insulated wire in rigid PVC conduit min.20mmdia.as per specification No.WG-MA / PC,para. no.1.4.1 (for sep plug-175mtr, DB to SB=475mtr, Computer Point-275mtr )
925
-
124
Supplying & erecting mains with 2 X 2.5 Sq.mm.& earth wire 1.5 sq.mm FR copper PVC insulated wire in rigid PVC conduit min.20mmdia.as per specification No.WG-MA / PC,para. no.1.4.1 (for power plug)
175
-
140
Supplying & erecting mains with 2 X 4 Sq.mm.& earth wire 2.5 sq.mm FR copper PVC insulated wire in rigid PVC conduit min.20 mm dia.as per specification No.WG-MA / PC,para. no.1.4.1.(if required )
5
-
168
Supplying & erecting mains with 4 X 2.5 Sq.mm.& earth wire 1.5 sq.mm FR copper PVC insulated wire in provided rigid PVC conduit min.25 mm dia.as per specification No.WG-MA / PC,para. no.1.4.1 (Double rate of 2x2.5 sq.mm+half rate of 2x1.5sq.mm) (ACDB-15mtr & UPSDB-15mtr at GF)
30
-
140
Supplying & erecting mains with 4 X 4 Sq.mm.& earth wire 2.5 sq.mm FR copper PVC insulated wire in rigid PVC conduit min.25 mm dia.as per specification No.WG-MA / PC,para. no.1.4.1.(LDB at GF-15mtr, UPS-5mtr)
20
-
250
Supplying & erecting mains with 4x10 sq.mm. and earth wire 6 sq.mm FR PVC copper wire, in HMS PVC conduit min. 32mm dia, as per specification No: WG-MA/PC..(AC outdoor Unit )
5
-
515
Supplying, erecting & terminating XLPE armoured cable 2 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(Lift Shaft Lighting)
25
-
150
Supplying, erecting & terminating XLPE armoured cable 3 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (pumps, approx)
50
-
181
Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (Fire Fighting) approx
50
-
279
Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (Lift)
20
-
373
Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (Main VTPN DB for ACDB )
25
-
230
Supplying, erecting & terminating XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( Panel Incoming Cable-50mtr, Generator Cable-50mtr. approximately)
100
-
277
Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 poles, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB (ACDB at Ground Floor)
1
-
2271
Supplying and erecting triple pole & neutral distribution board (TPNDB) with door surface / flush mounted SPMCB of 24 ways,on iron /GI frame / wooden board.(Horizontal bus bar type) as per specification No.SWSWR/MCBDB.(UPSDB at Ground Floor)
1
-
3249
Supplying and erecting triple pole & neutral distribution board (TPNDB) with door surface / flush mounted SPMCB of 36 ways,on iron /GI frame / wooden board.(Horizontal bus bar type) as per specification No.SW-SWR/MCBDB. (LDB at Ground Floor )
1
-
4422
Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles) on iron/ GI frame. (vertical busbar type) as per specification no. SWSWR/ MCBDB1(Main VTPN DB)
1
-
6185
Supplying, erecting & marking SPMCB 6 Amp. to 32 Amp. C series (motor/power) in provided distribution board as per specification No.SW-SWR/MCB.
72
-
173
Supplying FPMCB 6 Amp. to 32 Amp. in provided distribution board as per specification No.SW-SWR/MCB. ( for DB Incomers - 3 nos. lift- 2 nos)
5
-
1003
Supplying FPMCB 40 Amp. to 63 Amp. in provided distribution board as per specification No.SW-SWR/MCB. (if required)
1
-
1363
Supplying TPMCB 6 Amp. to 32 Amp. in provided distribution board as per specification No.SW-SWR/MCB.
3
-
725
Supplying TPMCB 40 Amp. to 63 Amp. in provided distribution board as per specification No.SW-SWR/MCB.
1
-
1026
Supplying DP MCB 6 Amp. to 32 Amp. in provided distribution board as per specification No.SW-SWR/MCB.
1
-
512
Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB Note-1) For use of 4pole MCCB in place of 3pole MCCB add 20% in overall rate of 3 pole MCCB.
1
-
6011
Supplying & erecting CRCA sheet metal one way enclousers suitable for DP MCB / TP MCB / FP MCB complete erected on angle iron frame. (for Lift - 2 Nos., Lift Lighting - 1 Nos.)
3
-
379
Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.
20
-
972
Supplying LED concealed type foot / step light with PVC body for indoor application suitable for upto 5 W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface ( 3 W night lamp -1 no.)
1
-
579
Supplying and erecting LED square / circular 5 to 8W downlighter having pressure die-cast aluminium housing, opal translucent cover,mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. ( , 6 W Circular- 36 nos. , 8W Circular- 38 nos.)
74
-
731
Supplying and erecting LED square / circular 9 to 12W downlighter having pressure die-cast aluminium housing, opal translucent cover,mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. ( 9 W Square- 18 Nos., 11W Square-10 nos., 12W -16 Nos)
44
-
823
Supplying and erecting LED square / circular 13 to 15W down lighter having pressure die-cast aluminum housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush typecomplete. (15W Square-36 nos.)
36
-
1315
Supplying and erecting moon type decorative wall/ceiling mounted fixture including LED upto 12W circular/square type with opaque diffuser and electronic driver including bracket complete. ( 11 W LED Decorative Wall Mouted fitting- 8 Nos.)
8
-
1825
Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22/E-27 base. ( 7W Wall Point- 8 Nos.)
8
-
147
Supplying and erecting decorative oval bulk head edge-lit 10W LED luminaire comprising of high brightness LED Fitting on provided PVC block / wooden board.(for lift shaft- 2 Nos.)
2
-
1496
Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF
2
-
2098
Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF
28
-
2144
Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF
3
-
1989
Supplying & erecting Fresh aircum Exhaust Fan of light duty 250 V A.C. 50 cycles 225 mm 1400 RPM rust proof body & blades, wiremesh, duly erected in an approved manner and marking sr. no. and date of erection.
5
-
1303
Supplying and erecting bell buzzer.
2
-
315
Main Distribution Panel Incomer :-160 A FP MCCB (25 KA) with S/C , E/F, U/V, O/L release 200 A, 4 pole Copper busbar, Multifunction meter, Outgoing :-100 A TP MCCB - 2 Nos.,32 A TP MCCB - 7 Nos.,25 A TP MCB - 2 Nos.,32 A FP MCB - 1 No.,16 A DP MCB - 1 No., 8 stage APFC Relay-1no.Along with 3 Phase CT's, Capacitor banks (Total 32 KVAr) - ,10 KVAr-1 No. 5 KVAr-3 Nos., 2.5 KVAr-2 Nos., 1 KVAr-2 Nos. (All capacitor feeders should be with 7% detuned reactors and all capacitors shall be 525 Volts.) Supplying, installing & commissioning of Cubical type made out of 14/16 gauge CRCA sheet as detailed below.All the Panel G.A. Drawings should be approved from Electrical Consultant before Fabrication.a) Feeders with indicator, b) Copper busbars with PVC sleev and tinned joints, c) Internal wiring, earthing etc.d) 7 tank pre treatment, powder coated finish (Siemens white ),e) Switchgears, wiring,f) All MCCBs shall have extended handles & above 250A shall be microprocessor based,g) MCCBs / SFUs above 63 A shall have busbar on incoming as well as outgoing side.h) All MCCBs shall be 25/16 KA & MCB of 10 KA only.i) All indication lamps shall be LED type only.,j) Bus bar Current density should be 1 to 1.5 Amp / sqmm,k) For Main & Other Panels please confirm cable entries before Fabrication.l) Base Frame for Panels using 75x40x5mm Channels painted with one coat of Red-oxide & two coats of Black Oil paint.m) All feeders should be compartmental in sheet metal.
1
-
294000
Supplying & laying (including excavation) 15 cms dia. half round RCC hume pipe with coupling collar of Std thickness at required depth up to 90 cms below Road/round surface for enclosing provided cable & necessary back filling with light ramming to make the road/ ground surface as it was (except bitumen carpet).(Aprox. for main incoming Cable from existing point of supply.)
50
-
525
Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia. Copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.
2
-
5165
Providing & erecting of Copper strip of required size used for earthing on wall and/ or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no. EA-EP.(For 25 x 3 copper patti weight- 0.67 KG/Mtrs. So for 75 Mtr. Wire (0.67 x 75 Mtr.=50.25 Kg.) (For LA, Lift,,Generator)
50.25
-
815
Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI ( Main Panel -2Nos, Lifts-2Nos, Lighting Arrestor-2Nos, UPS -1No)
7
-
13546
Supplying & erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with neccessory copper clamps fixed on wall / cable/ conduit with screws in an approved manner. (8 SWG) (0.1155 x 25Mtr.= 2.88Kg.)
2.88
-
779
Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP (Generator Neutral- 2Nos )
2
-
6166
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials,
testing & recording the results as per specification no. EA-EP.( Generator body- 2Nos )
2
-
5750
Supplying, erecting and commissioning of diesel generating set with alternator of 82.5 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. as per specification no. GEN-DG
1
-
717410
Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 62.5 kVA upto 82.5 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GENAMF Each 47824 2010 49834 As per Note no.-2 on page no.200:- In case of new DG set, if AMF/SYNC panel is to be used in lieu of standard panel, reduce rate by 10% of the cost of material of new AMF panel/SYNC panel.
1
-
96337
Supplying & erecting on line UPS pure sine wave of 5 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS
1
-
81651
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements