Pune Metropolitan Region Development Authority Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Pune Metropolitan Region Development Authority Tender
Civil And Construction
Building Construction
Eprocure
Opening Date30 May 2018
Closing DateCancelled
Tender Amount₹ 67,90,60,442
Costs
EMD
₹ 40,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_PMRDA_322206_1Bid Award Id
ViewTender No
PMRDA/Building/08/2018-19Tender Authority
Pune Metropolitan Region Development Authority ViewPurchaser Address
-Website
http://http://www.pmrda.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Part I and Part II Bidder shall upload rates in Part I only and Part II amount is fixed. Offer shall be compared for Part I and Part II together.
BOQ Items
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meter. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 meter.)
3384
-
-
Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 meter)
140.4
-
-
Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0 meter.)
115
-
-
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5 meter)
926
-
-
Extra over for Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (Lift from 1.50 to 3.0 meter).
10
-
-
Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete.(Lift upto 1.5 meter).
1120
-
-
Extra over for Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete.(Lift from 1.5 to 3.0 meter).
10
-
-
Filling in plinth and floors with approved excavated material in 15 centimeter to 20 centimeter layers including watering and compacting etc. complete.
305
-
-
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 centimeter to 20 centimeter including watering and compaction etc. complete.
234
-
-
Lime, Fly ash Stabilized Soil Sub-Base -- Construction of Sub-base using lime - Fly ash admixture with granular soil, free from organic matter/ deleterious material or clayey silts and low plasticity clays having PI between 5 and 20 and liquid limit less than 25 and commercial dry lime, slaked at site or pre-slaked with CaO content not less than 50 per cent, Fly ash to conform to gradation as per clause 4.3 of IRC: 88-1984, lime + Fly ash content ranging between 10 to 30 per cent, the minimum un-confined compressive strength and CBR value after 28 days curing and 4 days soaking to be 7.5kg/Square, centimeter and 25 per cent respectively, all as specified in IRC: 88-1984.
3030
-
-
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimeter to 20 centimeter thick including hand packing and compacting etc. complete.
434
-
-
ANTI-TERMITE WORKS
-
-
-
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.
5217
-
-
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per Square meter of vertical surface area covering 10 years guarantee on bond paper.
3274
-
-
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per Square meter of surface area covering ten years guarantee on bond paper.
2896
-
-
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 Centimeter diametre about 30 -60 centimeter deep at 15 centimeter c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
291
-
-
PLAIN AND REINFORCED CEMENT CONCRETE WORKS
-
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand (In leveling screed under flooring)
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
138.3
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
150.7
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
137.4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
136.7
-
-
From Eighth (L05) Floor up to Terrace Floor
137.1
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.
580
-
-
Providing and laying in position and compaction as specified machine mixed plain cement concrete using maximum 20 milimeter down graded coarse aggregate and with embedding 30% hard stone plums of 160 to 300 millimeter size including all necessary form work wherever necessary, in grade M20 concrete to shape and depth as specified curing etc. complete as directed by the Engineer-in-charge.
371
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for steps including steel centering, plywood/steel formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.
8
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)
-
-
-
From Ground (P01) up to First (P02) Floor
12
-
-
Terrace Floor (As the part of Eighth floor)
2
-
-
Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement, grade slab including all materials and labour complete.
3446
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
1338
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
-
-
-
In Foundation up to Lower Ground Floor
119
-
-
From Lower Ground Floor up to Ground (P01) Floor
194
-
-
From Ground (P01) up to First (P02) Floor
179
-
-
From First (P02) Floor up to Second (P03) Floor
179
-
-
From Second (P03) Floor up to Third (P04) Floor
164
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.
-
-
-
From Third (P04) Floor up to Forth (L01) Floor
164
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
160
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
160
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
160
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
162
-
-
From Eighth (L05) Floor up to Terrace Floor
160
-
-
Terrace Floor (As the part of Eighth floor)
162
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Retaining Walls, Shear Walls, Lift wall, Parapet wall as per detailed designs and drawing or as directed including centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.
-
-
-
In Foundation up to Lower Ground Floor
479
-
-
From Lower Ground Floor up to Ground (P01) Floor
485
-
-
From Ground (P01) up to First (P02) Floor
122
-
-
From First (P02) Floor up to Second (P03) Floor
127
-
-
From Second (P03) Floor up to Third (P04) Floor
129
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C., Shear Walls, Lift wall, Parapet wall as per detailed designs and drawing or as directed including centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.
-
-
-
From Third (P04) Floor up to Forth (L01) Floor
129
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
104
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
113
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
104
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
104
-
-
From Eighth (L05) Floor up to Terrace Floor
104
-
-
Terrace Floor (As the part of Eighth floor)
116
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.
-
-
-
In Foundation up to Lower Ground Floor
146.1
-
-
From Lower Ground Floor up to Ground (P01) Floor
5
-
-
From Ground (P01) up to First (P02) Floor
179
-
-
From First (P02) Floor up to Second (P03) Floor
169
-
-
From Second (P03) Floor up to Third (P04) Floor
209
-
-
From Third (P04) Floor up to Forth (L01) Floor
199
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
197
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
223
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
210
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
212
-
-
From Eighth (L05) Floor up to Terrace Floor
214
-
-
Terrace Floor (As the part of Eighth floor)
487
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
-
-
-
In Grade slab at Lower Ground Floor
299
-
-
From Lower Ground Floor up to Ground (P01) Floor
74
-
-
From Ground (P01) up to First (P02) Floor
359
-
-
In Grade slab From Ground (P01) up to First (P02) Floor
7
-
-
From First (P02) Floor up to Second (P03) Floor
357
-
-
From Second (P03) Floor up to Third (P04) Floor
404
-
-
From Third (P04) Floor up to Forth (L01) Floor
379
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
373
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
397
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
369
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
369
-
-
From Eighth (L05) Floor up to Terrace Floor
374
-
-
Terrace Floor (As the part of Eighth floor)
376
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with Cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
8
-
-
From Ground (P01) up to First (P02) Floor
8
-
-
From First (P02) Floor up to Second (P03) Floor
8
-
-
From Second (P03) Floor up to Third (P04) Floor
8
-
-
From Third (P04) Floor up to Forth (L01) Floor
8
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
8
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
8
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
8
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
8
-
-
From Eighth (L05) Floor up to Terrace Floor
8
-
-
Providing, fixing/laying in position 0.7/0.8 millimeter thick galvanised CRF Deck shuttering system with girth 50-55 millimeter nominal, Fy=345Mpa conforming to latest IS norms, of approved quality & make, including making holes of appropriate dia in the sheet & fixing to the shear connector bars / brackets in the structural frame work, necessary scaffolding / staging / formworkas per drawings as specified as directed by Engineer-in-charge. The shuttering should be installed permanently.
-
-
-
From First (P02) Floor up to Second (P03) Floor
85
-
-
Providing the pockets in the equipment foundation of any size, shape wherever required as per drawing including grouting the same using GP2/GP1 of Conbextra manufactured by Fosroc or approved equivalent after bolting, anchoring, cleaning, bonding chemical agent, curing all complete as instructed by the Engineer-in-charge.
0.5
-
-
Providing and fixing 12 millimeter thick non-bitumenous compressible isolation board of approved make set vertically on concrete/masonry surface as specified and as directed by Engineer-in-charge. (for Grade slab)
204
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 4.15 meter, for every additional height of 1 metre or part thereof (Plan area to be measured)
-
-
-
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
399
-
-
Proviing and fixing for providing formwork for exposed form finished concrete surface in desired pattern, sizes with grooves, including neat cleaning & rendering of exposed concrete surface, deshuttering, as per the sample approved by the Architect and as directed by the Engineer-in-charge. (Same kind of shuttering material should be only used for standard and residual sizes.)
-
-
-
From Ground (P01) up to First (P02) Floor
3880
-
-
From First (P02) Floor up to Second (P03) Floor
3735
-
-
From Second (P03) Floor up to Third (P04) Floor
4083
-
-
From Third (P04) Floor up to Forth (L01) Floor
4083
-
-
Providing and casting Pre-cast RCC in any size, shape and thickness in M30 grade concrete including all casting arrangements like casting beds, stacking yard, etc., all necessary shuttering and formwork, curing, lifting and transportation from casting beds stacking yards, erection to the required heights and locations, alignment, levelling and fixing of units wherever required, in-situ welding/temporary supports for fixing the units, scaffolding / staging, grouting of joints with 1:1 cement sand grout etc. complete as per drawings and as directed. (Reinforcement steel, inserts, pipe embedment, etc. will be paid separately).
10
-
-
Providing and applying protection in one or two coats to give uniform coating to concrete surface in contact with soil using Bituminous paint including scaffolding, staging etc complete as per requirement and directions of the Engineer in charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
3274
-
-
REINFORCEMENT STEEL WORKS
-
-
-
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
-
-
-
In Foundation up to Lower Ground Floor
253
-
-
From Lower Ground Floor up to Ground (P01) Floor
173
-
-
From Ground (P01) up to First (P02) Floor
170
-
-
From First (P02) Floor up to Second (P03) Floor
166
-
-
From Second (P03) Floor up to Third (P04) Floor
181
-
-
From Third (P04) Floor up to Forth (L01) Floor
175
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
161
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
172
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
164
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
164
-
-
From Eighth (L05) Floor up to Terrace Floor
166
-
-
Terrace Floor (As the part of Eighth floor)
298
-
-
Providing and fixing at all heights, levels, stages couplers/Reducers conforming to IS16172 and UTS 545 Mpa of approved quality of specified diameters at laps and joints of steel reinforcement including threading to reinforcement bars, enlargement at connection by forging, protecting the prepared reinforcement bars and related operations as required to complete the works per direction of Engineer in-Charge.
-
-
-
Couplers of 16 millimeter diameter
-
-
-
In Foundation up to Lower Ground Floor
10
-
-
From Lower Ground Floor up to Ground (P01) Floor
100
-
-
From Ground (P01) up to First (P02) Floor
100
-
-
From First (P02) Floor up to Second (P03) Floor
100
-
-
From Second (P03) Floor up to Third (P04) Floor
100
-
-
From Third (P04) Floor up to Forth (L01) Floor
100
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
100
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
100
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
100
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
100
-
-
From Eighth (L05) Floor up to Terrace Floor
100
-
-
Terrace Floor (As the part of Eighth floor)
100
-
-
Couplers of 20 millimeter diameter
-
-
-
In Foundation up to Lower Ground Floor
10
-
-
From Lower Ground Floor up to Ground (P01) Floor
100
-
-
From Ground (P01) up to First (P02) Floor
100
-
-
From First (P02) Floor up to Second (P03) Floor
100
-
-
From Second (P03) Floor up to Third (P04) Floor
100
-
-
From Third (P04) Floor up to Forth (L01) Floor
100
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
100
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
100
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
100
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
100
-
-
From Eighth (L05) Floor up to Terrace Floor
100
-
-
Terrace Floor (As the part of Eighth floor)
100
-
-
Couplers of 25 millimeter diameter
-
-
-
In Foundation up to Lower Ground Floor
10
-
-
From Lower Ground Floor up to Ground (P01) Floor
100
-
-
From Ground (P01) up to First (P02) Floor
100
-
-
From First (P02) Floor up to Second (P03) Floor
100
-
-
From Second (P03) Floor up to Third (P04) Floor
100
-
-
From Third (P04) Floor up to Forth (L01) Floor
100
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
100
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
100
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
100
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
100
-
-
From Eighth (L05) Floor up to Terrace Floor
100
-
-
Terrace Floor (As the part of Eighth floor)
100
-
-
Couplers of 32 millimeter diameter
-
-
-
In Foundation up to Lower Ground Floor
10
-
-
From Lower Ground Floor up to Ground (P01) Floor
80
-
-
From Ground (P01) up to First (P02) Floor
80
-
-
From First (P02) Floor up to Second (P03) Floor
80
-
-
From Second (P03) Floor up to Third (P04) Floor
80
-
-
From Third (P04) Floor up to Forth (L01) Floor
80
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
80
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
80
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
80
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
80
-
-
From Eighth (L05) Floor up to Terrace Floor
80
-
-
Terrace Floor (As the part of Eighth floor)
80
-
-
Couplers of 40 millimeter diameter
-
-
-
In Foundation up to Lower Ground Floor
25
-
-
From Lower Ground Floor up to Ground (P01) Floor
25
-
-
From Ground (P01) up to First (P02) Floor
25
-
-
From First (P02) Floor up to Second (P03) Floor
25
-
-
From Second (P03) Floor up to Third (P04) Floor
25
-
-
From Third (P04) Floor up to Forth (L01) Floor
25
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
25
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
25
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
25
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
25
-
-
From Eighth (L05) Floor up to Terrace Floor
25
-
-
Reducer of 20 to 16 millimeter diameter
-
-
-
In Foundation up to Lower Ground Floor
50
-
-
From Lower Ground Floor up to Ground (P01) Floor
50
-
-
From Ground (P01) up to First (P02) Floor
50
-
-
From First (P02) Floor up to Second (P03) Floor
50
-
-
From Second (P03) Floor up to Third (P04) Floor
50
-
-
From Third (P04) Floor up to Forth (L01) Floor
50
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
50
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
50
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
50
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
50
-
-
From Eighth (L05) Floor up to Terrace Floor
50
-
-
Terrace Floor (As the part of Eighth floor)
50
-
-
Reducer of 25 to 20 millimeter diameter
-
-
-
In Foundation up to Lower Ground Floor
50
-
-
From Lower Ground Floor up to Ground (P01) Floor
50
-
-
From Ground (P01) up to First (P02) Floor
50
-
-
From First (P02) Floor up to Second (P03) Floor
50
-
-
From Second (P03) Floor up to Third (P04) Floor
50
-
-
From Third (P04) Floor up to Forth (L01) Floor
50
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
50
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
50
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
50
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
50
-
-
From Eighth (L05) Floor up to Terrace Floor
50
-
-
Terrace Floor (As the part of Eighth floor)
50
-
-
Reducer of 32 to 25 millimeter diameter
-
-
-
In Foundation up to Lower Ground Floor
50
-
-
From Lower Ground Floor up to Ground (P01) Floor
50
-
-
From Ground (P01) up to First (P02) Floor
50
-
-
From First (P02) Floor up to Second (P03) Floor
50
-
-
From Second (P03) Floor up to Third (P04) Floor
50
-
-
From Third (P04) Floor up to Forth (L01) Floor
50
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
50
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
50
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
50
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
50
-
-
From Eighth (L05) Floor up to Terrace Floor
50
-
-
Terrace Floor (As the part of Eighth floor)
50
-
-
Reducer of 32 to 20 millimeter diameter
-
-
-
In Foundation up to Lower Ground Floor
50
-
-
From Lower Ground Floor up to Ground (P01) Floor
50
-
-
From Ground (P01) up to First (P02) Floor
50
-
-
From First (P02) Floor up to Second (P03) Floor
50
-
-
From Second (P03) Floor up to Third (P04) Floor
50
-
-
From Third (P04) Floor up to Forth (L01) Floor
50
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
50
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
50
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
50
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
50
-
-
From Eighth (L05) Floor up to Terrace Floor
50
-
-
Terrace Floor (As the part of Eighth floor)
50
-
-
Reducer of 40 to 32 millimeter diameter
-
-
-
In Foundation up to Lower Ground Floor
50
-
-
From Lower Ground Floor up to Ground (P01) Floor
50
-
-
From Ground (P01) up to First (P02) Floor
50
-
-
From First (P02) Floor up to Second (P03) Floor
50
-
-
From Second (P03) Floor up to Third (P04) Floor
50
-
-
From Third (P04) Floor up to Forth (L01) Floor
50
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
50
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
50
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
50
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
50
-
-
From Eighth (L05) Floor up to Terrace Floor
50
-
-
Terrace Floor (As the part of Eighth floor)
50
-
-
Reducer of 40 to 25 millimeter diameter
-
-
-
In Foundation up to Lower Ground Floor
25
-
-
From Lower Ground Floor up to Ground (P01) Floor
25
-
-
From Ground (P01) up to First (P02) Floor
25
-
-
From First (P02) Floor up to Second (P03) Floor
25
-
-
From Second (P03) Floor up to Third (P04) Floor
25
-
-
From Third (P04) Floor up to Forth (L01) Floor
25
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
25
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
25
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
25
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
25
-
-
From Eighth (L05) Floor up to Terrace Floor
25
-
-
Terrace Floor (As the part of Eighth floor)
25
-
-
Providing and fixing during laying in RCC Slab rectangular 2 millimeter thick M.S. sheet fan hook box of size 180x100 millimeter with required depth with holes or notches as required, bottom and top sides of 1.6 millimeter M.S. sheet fixed with 3.5 millimeter diameter round headed screws together with 12 millimeter diameter M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface.
-
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
Providing and installing anchor bars (Rebars) of all types and of specified diameter upto 300 millimeter penetration at any location as directed by Engineer at all heights, levels including drilling holes, grouting non-shrink cementitious grout all as per manufacturer's (HILTI or approved equivalent) written instructions/specifications, staging/scaffolding, curing, cleaning etc complete as directed by Engineer-in-charge. (Rebars shall be measured and paid under Reinforcement steel)
-
-
-
Rebaring with 10 millimeter diameter bars
-
-
-
In Foundation up to Lower Ground Floor
5
-
-
From Lower Ground Floor up to Ground (P01) Floor
5
-
-
From Ground (P01) up to First (P02) Floor
5
-
-
From First (P02) Floor up to Second (P03) Floor
5
-
-
From Second (P03) Floor up to Third (P04) Floor
5
-
-
From Third (P04) Floor up to Forth (L01) Floor
5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
5
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
5
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
5
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
5
-
-
From Eighth (L05) Floor up to Terrace Floor
5
-
-
Terrace Floor (As the part of Eighth floor)
5
-
-
Rebaring with 12 millimeter diameter bars
-
-
-
In Foundation up to Lower Ground Floor
5
-
-
From Lower Ground Floor up to Ground (P01) Floor
5
-
-
From Ground (P01) up to First (P02) Floor
5
-
-
From First (P02) Floor up to Second (P03) Floor
5
-
-
From Second (P03) Floor up to Third (P04) Floor
5
-
-
From Third (P04) Floor up to Forth (L01) Floor
5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
5
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
5
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
5
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
5
-
-
From Eighth (L05) Floor up to Terrace Floor
5
-
-
Terrace Floor (As the part of Eighth floor)
5
-
-
Rebaring with 16 millimeter diameter bars
-
-
-
In Foundation up to Lower Ground Floor
5
-
-
From Lower Ground Floor up to Ground (P01) Floor
5
-
-
From Ground (P01) up to First (P02) Floor
5
-
-
From First (P02) Floor up to Second (P03) Floor
5
-
-
From Second (P03) Floor up to Third (P04) Floor
5
-
-
From Third (P04) Floor up to Forth (L01) Floor
5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
5
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
5
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
5
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
5
-
-
From Eighth (L05) Floor up to Terrace Floor
5
-
-
Terrace Floor (As the part of Eighth floor)
5
-
-
Rebaring with 20 millimeter diameter bars
-
-
-
In Foundation up to Lower Ground Floor
5
-
-
From Lower Ground Floor up to Ground (P01) Floor
5
-
-
From Ground (P01) up to First (P02) Floor
5
-
-
From First (P02) Floor up to Second (P03) Floor
5
-
-
From Second (P03) Floor up to Third (P04) Floor
5
-
-
From Third (P04) Floor up to Forth (L01) Floor
5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
5
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
5
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
5
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
5
-
-
From Eighth (L05) Floor up to Terrace Floor
5
-
-
Terrace Floor (As the part of Eighth floor)
5
-
-
Rebaring with 25 millimeter diameter bars
-
-
-
In Foundation up to Lower Ground Floor
5
-
-
From Lower Ground Floor up to Ground (P01) Floor
5
-
-
From Ground (P01) up to First (P02) Floor
5
-
-
From First (P02) Floor up to Second (P03) Floor
5
-
-
From Second (P03) Floor up to Third (P04) Floor
5
-
-
From Third (P04) Floor up to Forth (L01) Floor
5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
5
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
5
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
5
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
5
-
-
From Eighth (L05) Floor up to Terrace Floor
5
-
-
Terrace Floor (As the part of Eighth floor)
5
-
-
WATERPROOFING WORKS
-
-
-
Providing and fixing 20 to 25 millimeter thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 millimeter depth, filling the joints with 6 millimeter size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )
1886
-
-
Providing and fixing 20 to 25 millimeter thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 millimeter between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 millimeter and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete.
1043
-
-
Providing and laying damp proof course 50 millimeter thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete.
5
-
-
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in Cement mortar1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with Cement mortar1:3 admixed with approved water proofing compound and finally top finishing with average 20 millimeter. thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 millimeter x 300 millimeter. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.
2539
-
-
Providing water proof bedding for flooring of Bath and WC 25 millimeter thick in Cement mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.
-
-
-
From Ground (P01) up to First (P02) Floor
4
-
-
From First (P02) Floor up to Second (P03) Floor
4
-
-
From Second (P03) Floor up to Third (P04) Floor
3
-
-
From Third (P04) Floor up to Forth (L01) Floor
3
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
79
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
79
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
85
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
90
-
-
From Eighth (L05) Floor up to Terrace Floor
56
-
-
Providing waterproof plaster in W.C. and bath 20 millimeter thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.
-
-
-
From Ground (P01) up to First (P02) Floor
45
-
-
From First (P02) Floor up to Second (P03) Floor
16
-
-
From Second (P03) Floor up to Third (P04) Floor
17
-
-
From Third (P04) Floor up to Forth (L01) Floor
17
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
324
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
395
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
395
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
395
-
-
From Eighth (L05) Floor up to Terrace Floor
280
-
-
Providing water proof bedding for flooring of balcony and similar areas 25 millimeter thick in Cement mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
125
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
282
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
125
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
125
-
-
From Eighth (L05) Floor up to Terrace Floor
162
-
-
Providing waterproof plaster in balcony and similar areas 20 millimeter thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
70
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
70
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
70
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
70
-
-
From Eighth (L05) Floor up to Terrace Floor
70
-
-
Providing & mixing pure acrylic based Polymer Modified Cementitious water proofing compound in concrete work mixed with cement in required proportions as per manufacturer's guidelines, specifications and as directed by the Engineer-in-charge. (Note : Reinforced cement concrete shall be paid seperately.)
-
-
-
From Foundation to Lower Ground Floo Floor
500
-
-
From Lower Ground Floor up to Ground (P01) Floor
500
-
-
Providing and laying in position and compaction as specified in-situ cellular light weight concrete (without stone aggregate) filling minimum thickness not less that 50 millimeter, density range 800-1000 Kilogram per Cubic meter, made out of pre-formed stable form including all necessary form work, casting in panels of any size and thickness wherever necessary, to shape and depth as specified, in the required proportion to get the desired density, mixing, transportation, pumping, placing, compacting and finishing to the required level with necessary side supports, equipments, curing, etc., complete as per manufacturer's guidelines and as approved by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
46
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
46
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
27
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
27
-
-
From Eighth (L05) Floor up to Terrace Floor
27
-
-
Terrace Floor (As the part of Eighth floor)
27
-
-
Providing and applying a base coat comprising of 1 Kilogram Polydee-MC and 1 Kilogram fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hours. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
522
-
-
Providing and applying water swellable-bar at starter joints Hydroswell HDP 2010 at all construction joints, it shall have unrestrained volumetric expansion more than 100% in 30 days, Hydrostatic pressure resistance of 50 meters. It shall be fixed to the concrete using a gun grade hydrophilic adhesive / or mechanically fixed by non corrosive nailing as recommended by manufacturer.
-
-
-
From Foundation up to Lower Ground Floor
285
-
-
From Lower Ground Floor up to Ground (P01) Floor
27
-
-
Providing & sealing the pipe inserts, etc provided in the floors, beams, walls with 1.5 millimeter thick two sided non-reinforced polymerized bituminous self adhesive Tape having Elongation, (Compound) 500% as per ASTM D 412, Water permeability @ 5bar : Nil as per BS EN 12390 to seal the joint between pipes/inserts and the core cuts, followed by grouting the gaps around the pipe / inserts with a non shrink cementitious waterproof grout, conform to ASTM C 109 - 1999 18, ASTM C 1107, Grade C, etc, complete as per manufacturers' specifications as directed by Engineer-in-charge.Treatment to the Pipe Outlets / Drain outlets / Cut outs etc upto 300 millimeter dia manufactured by Pidilite or approved equivalent.
-
-
-
To internal area of UGWT
2
-
-
To internal area of STP
2
-
-
Waterproofing Treatment: Providing & Applying 2 coats of CFTRI approved, waterproof coating with high performance two component pre-packed cementitious waterproofing, Dr. Fixit Fastflex, with a mix ratio of (liquid: Powder), parts by wt. - 1:1.4 @ 2.2 Kilogram/square meter to achieve DFT of 1.5 millimeter over the wall surface as per the manufacturers’ specification & drawing. All the coats to be applied in right angle to each other. The coating shall have following properties: Tensile strength : 2.6 Newton/square millimeter as per ASTM D 412, Elongation at break, % : 120 as per ASTM D 412, Adhesion strength : 1 Newton/square millimeter as per ASTM D 4541, crack bridging : 2 millimeter as per ASTM C 836, Water penetration (5 bar pressure) : 1% as per BS EN 12390, Hardness, Shore A : 60 as per ASTM D 2240, RCPT permeability : 92% as per ASTM C 1202-97, including cleaning the surface, removing the laitance, grease, old paints, contaminants, curing compound with wire brush, cleaning the surface with compressed air. Damaged or loose plaster to be repaired with polymer modified cement-sand mortar with SBR Latex, Pidicrete URP. Small cracks upto 5millimeter needs to be repaired with crack filling material Crack X and the cracks above 5millimeter shall be repaired by polymer modified mortar with SBR Latex, Pidicrete URP as per manufacturers' specification, etc, complete.(to the internal area of STP-For Bottoms and Walls)
278
-
-
Protection Cum chemical resistant Coat: Providing and applying 2 coats of solvent free epoxy coating, Pidipoxy EC-SF, to protect the surface from chemical attack, acid and alkalis attack present is sewage to the slab areas and to the wall upto full height and the ceiling, including application of moisture insensitive epoxy primer MIEP. The coverage of the EC-SF coating shall be 3-4 square meter/Kilogram/coat to attain DFT of 200 microns. The coating shall have following properties: Specific gravity: 1.35 +/- 0.02 g/cc, Hardness, Shore D: 84 as per ASTM D 2240, Tensile strength (7D): 15 Mpa as per ASTM C 307, Compressive Str. (7D): 85 Mpa as per ASTM C 579, Flexural Strength (7D): 35 Mpa, abrasion resistant as per ASTM D 4060, etc,complete. Protection Cum chemical resistant Coat using Pidipoxy EC-SF manufactured by Pidilite or approved equivalent (to the internal area of STP)
314
-
-
MASONRY WORKS
-
-
-
Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
108.9
-
-
From Ground (P01) up to First (P02) Floor
79.2
-
-
From First (P02) Floor up to Second (P03) Floor
45
-
-
From Second (P03) Floor up to Third (P04) Floor
48.6
-
-
From Third (P04) Floor up to Forth (L01) Floor
48.6
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
212.6
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
174.6
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
195.3
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
211.5
-
-
From Eighth (L05) Floor up to Terrace Floor
161.1
-
-
Terrace Floor (As the part of Eighth floor)
29.7
-
-
Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 millimeter diameter / two hoop iron strips 25 millimeter x 1.60 millimeter at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
14.2
-
-
From Ground (P01) up to First (P02) Floor
17.1
-
-
From First (P02) Floor up to Second (P03) Floor
9.5
-
-
From Second (P03) Floor up to Third (P04) Floor
8.3
-
-
From Third (P04) Floor up to Forth (L01) Floor
8.3
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
26.5
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
23.8
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
23.8
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
23.8
-
-
From Eighth (L05) Floor up to Terrace Floor
64.9
-
-
Terrace Floor (As the part of Eighth floor)
3.2
-
-
Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
63.9
-
-
From Ground (P01) up to First (P02) Floor
77
-
-
From First (P02) Floor up to Second (P03) Floor
42.8
-
-
From Second (P03) Floor up to Third (P04) Floor
37.4
-
-
From Third (P04) Floor up to Forth (L01) Floor
37.4
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
119.3
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
107.1
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
107.3
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
107.1
-
-
From Eighth (L05) Floor up to Terrace Floor
292.1
-
-
Terrace Floor (As the part of Eighth floor)
14.4
-
-
Providing Green Build Product (GBP) Build Fast Plus masonry ecofriendly wet mix /Blocks of size 100 millimeter X 240 millimeter x 650 millimeter laying Adhesive is a pre-polymerized, wet mix jointing adhesive which is suitable for Building masonry walls with all kind of blocks with thickness of thin layer of 2 millimeter to 4 millimeter between masonry units. There is no need to pre-wet the Blocks nor to post cure the wall with water.Confirming to IS 2185 of size in superstructure including striking joints, racking out joints faces and scaffolding etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
127.8
-
-
From Ground (P01) up to First (P02) Floor
153.9
-
-
From First (P02) Floor up to Second (P03) Floor
85.5
-
-
From Second (P03) Floor up to Third (P04) Floor
74.7
-
-
From Third (P04) Floor up to Forth (L01) Floor
74.7
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
238.5
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
214.2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
214.5
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
214.2
-
-
From Eighth (L05) Floor up to Terrace Floor
584.1
-
-
Terrace Floor (As the part of Eighth floor)
28.8
-
-
Providing Green Build Product (GBP) Build Fast Plus masonry ecofriendly wet mix /Blocks of size 200 millimeter X 240 millimeter x 650 millimeter laying Adhesive is a pre-polymerized, wet mix jointing adhesive which is suitable for Building masonry walls with all kind of blocks with thickness of thin layer of 2 millimeter to 4 millimeter between masonry units. There is no need to pre-wet the Blocks nor to post cure the wall with water.Confirming to IS 2185 of size in superstructure including striking joints, racking out joints faces and scaffolding etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
60.5
-
-
From Ground (P01) up to First (P02) Floor
44
-
-
From First (P02) Floor up to Second (P03) Floor
25
-
-
From Second (P03) Floor up to Third (P04) Floor
27
-
-
From Third (P04) Floor up to Forth (L01) Floor
27
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
118.1
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
97
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
108.5
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
117.5
-
-
From Eighth (L05) Floor up to Terrace Floor
89.5
-
-
Terrace Floor (As the part of Eighth floor)
16.5
-
-
Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on un exposed faces and watering etc.complete.
4
-
-
Providing random rubble masonry second sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure racking out joints when plastering is to be done / striking joints when no pointing or plastering is to be done on the inside watering and scaffolding etc.complete.
32
-
-
PLASTERING WORKS
-
-
-
Providing internal cement plaster 12 millimeter thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
78
-
-
From Ground (P01) up to First (P02) Floor
219
-
-
From First (P02) Floor up to Second (P03) Floor
79
-
-
From Second (P03) Floor up to Third (P04) Floor
79
-
-
From Third (P04) Floor up to Forth (L01) Floor
79
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
808
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
590
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
584
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
586
-
-
From Eighth (L05) Floor up to Terrace Floor
836
-
-
Terrace Floor (As the part of Eighth floor)
10
-
-
Providing internal cement plaster 6 millimeter thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
50
-
-
From Ground (P01) up to First (P02) Floor
50
-
-
From First (P02) Floor up to Second (P03) Floor
50
-
-
From Second (P03) Floor up to Third (P04) Floor
50
-
-
From Third (P04) Floor up to Forth (L01) Floor
50
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
50
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
50
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
50
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
50
-
-
From Eighth (L05) Floor up to Terrace Floor
50
-
-
Terrace Floor (As the part of Eighth floor)
50
-
-
Providing and applying 15 millimeter thick ready mix plaster manufactured by Envoplast or approved equivalent manufacturer having IGBC GREEN product certificate in cement mortar 1:3 (1 cement : 3 fine sand) modified to cement mortar 1:5 by adding 2 parts by volume of crushed sand/as per manufacturer's instructions; to internal surfaces of concrete and masonry work; including raking out joints, hacking concrete surfaces, preparing junctions of concrete / masonry by neat cleaning, preparing jambs, cills, grooves, pattas, wattas, rounding of corners, etc. all complete as per architectural drawings, specifications and finished smooth with wooden rundha/float / made rough to receive further finishing work etc. or as specified by the Engineer; at all leads, depth and lifts, including providing independent double-legged scaffolding, cleaning of surfaces, curing, etc. complete as per specification and as directed by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1874
-
-
From Ground (P01) up to First (P02) Floor
1430
-
-
From First (P02) Floor up to Second (P03) Floor
915
-
-
From Second (P03) Floor up to Third (P04) Floor
945
-
-
From Third (P04) Floor up to Forth (L01) Floor
945
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2808
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2254
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2631
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2843
-
-
From Eighth (L05) Floor up to Terrace Floor
2737
-
-
Terrace Floor (As the part of Eighth floor)
196
-
-
Providing and applying minimum 20 millimeter thick external sand faced plaster in two coats at all heights and levels, using ready mix plaster manufactured by Envoplast or approved equivalent manufacturer having IGBC GREEN product certificate, cement mortar 1:3 (1 cement : 3 fine sand) modified to cement mortar 1:5 by adding crushed sand/as per manufacturer's instructions, first coat to be 12 millimeter thick, keeping the surface of the base coat rough to receive sand faced treatment, Second coat to be 8 millimeter thick in cement mortar 1:5, finishing the surface, by taking out grains or keeping the surface rough to receive finishing work or as required to receive specified architectural external finish, to correct line, plumb and level to external faces of walls, soffits/ceiling if any, including raking out joints, hacking concrete surfaces, preparing junctions of concrete / masonry by neat cleaning, preparing jambs, cills, grooves, pattas, wattas, rounding of corners, etc. all complete as per architectural drawings, specifications and keeping the surface of the base coat rough to receive sand faced treatment, apply chemical adhesive coating to concrete surfaces wherever required and then apply a scratch coat plaster (prior to main plaster for positive bond), independent double legged scaffolding, staging, curing, cleaning, etc. all complete as specified as directed by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1103
-
-
From Ground (P01) up to First (P02) Floor
858
-
-
From First (P02) Floor up to Second (P03) Floor
229
-
-
From Second (P03) Floor up to Third (P04) Floor
225
-
-
From Third (P04) Floor up to Forth (L01) Floor
225
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
1451
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1534
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1409
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1427
-
-
From Eighth (L05) Floor up to Terrace Floor
1548
-
-
Terrace Floor (As the part of Eighth floor)
1122
-
-
Providing and applying Texture plaster with finishing with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/ Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6 millimeter thick or Tape Grooves 35 to 45 millimeter thickness or as required in all postion including preparing the surface scaffolding etc. complete. ( Excluding texture Paint and Texture Paint Finishing) (Prior permission of S.E. is required before inclusion of this item in the estimate)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1103
-
-
From Ground (P01) up to First (P02) Floor
858
-
-
From First (P02) Floor up to Second (P03) Floor
229
-
-
From Second (P03) Floor up to Third (P04) Floor
225
-
-
From Third (P04) Floor up to Forth (L01) Floor
225
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
1221.2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1304.2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1179.2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1197.2
-
-
From Eighth (L05) Floor up to Terrace Floor
1318.2
-
-
Terrace Floor (As the part of Eighth floor)
1122
-
-
Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etc.complete.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
551
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
551
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
551
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
551
-
-
From Eighth (L05) Floor up to Terrace Floor
551
-
-
Providing & fixing high density Polymer based non corrosive chicken wire mesh of diamond pattern of size having 15 millimeter diagonals of aperture at the junction of dissimilar surfaces of brick / block masonry wall and RCC column / beams and the like including necessary "U" nails / screws with cleats for fixing, overlapping etc. complete all as per specification and as directed by the Engineer for all height and all locations.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
208
-
-
From Ground (P01) up to First (P02) Floor
160
-
-
From First (P02) Floor up to Second (P03) Floor
80
-
-
From Second (P03) Floor up to Third (P04) Floor
82
-
-
From Third (P04) Floor up to Forth (L01) Floor
82
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
298
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
265
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
283
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
299
-
-
From Eighth (L05) Floor up to Terrace Floor
300
-
-
Terrace Floor (As the part of Eighth floor)
92
-
-
Providing and applying gypsum plaster (with Gypsum material of Gypsum India / Mega Sign or equivalent make) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc. complete.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
1840
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1539
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1774
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1938
-
-
From Eighth (L05) Floor up to Terrace Floor
1754
-
-
Terrace Floor (As the part of Eighth floor)
305
-
-
Providing fine cement finish 1.5 millimeter thick over green plaster surface including scaffolding curing etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1064
-
-
Providing vee pointing with cement mortar 1:3 for stone / Brick masonry including scaffolding and curing etc. complete
-
-
-
From Ground (P01) up to First (P02) Floor
105
-
-
STRUCTURAL STEEL WORKS
-
-
-
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
3
-
-
From Ground (P01) up to First (P02) Floor
3
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
1
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1
-
-
From Eighth (L05) Floor up to Terrace Floor
1
-
-
Terrace Floor (As the part of Eighth floor)
160
-
-
Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 millimeter to 450 millimeter section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.
In Canopies, parasole, Terrace parapet railings, Flag posts, Entrance gates, vertical elevations and similar locations
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From Ground (P01) up to First (P02) Floor
8
-
-
From First (P02) Floor up to Second (P03) Floor
33
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
1
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1
-
-
From Eighth (L05) Floor up to Terrace Floor
1
-
-
Terrace Floor (As the part of Eighth floor)
5
-
-
Providing and applying of UV protecive PU coating in two coats of approved colour including a anticorrosive undercoat epoxy primer, cleaning and preparing the surfaces, filling the crevices with approved filler, scaffolding / staging etc. complete all as per specifications of the manufacturer.
-
-
-
Terrace Floor (As the part of Eighth floor)
165
-
-
Providing, fabricating and fixing MS pipe sleeves/embedments comprising of insert plates, foundation bolts, nuts, washers, curb angles, nosing angles and holdfasts, MS pipe sleeves with puddle flanges of required diameter and threaded ends etc. including necessary welding, threading etc. complete as per drawings and as directed by Engineer in charge (Design of puddle flange shall be provided by the Services consultant.)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
0.5
-
-
From Ground (P01) up to First (P02) Floor
0.5
-
-
From First (P02) Floor up to Second (P03) Floor
0.5
-
-
From Second (P03) Floor up to Third (P04) Floor
0.5
-
-
From Third (P04) Floor up to Forth (L01) Floor
0.5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
0.5
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
0.5
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
0.5
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
0.5
-
-
From Eighth (L05) Floor up to Terrace Floor
0.5
-
-
Terrace Floor (As the part of Eighth floor)
0.5
-
-
Supplying & fixing approved MS Foundation bolts and nuts of approved quality, diameter and required length for connection of structural members including plain / spring washers, templates etc. complete all as directed by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
Terrace Floor (As the part of Eighth floor)
1
-
-
Providing and grouting below base plate of columns, equipments, around the foundation bolts with approved pre-packed cementetious non shrink grout of Conbextra GP2 by FOSROC or equivalent including mixing, placing as per manufacturer's recommendation, cleaning the base by water/ compressed air, shuttering, scaffolding, curing cleaning at all levels and heights etc. complete as directed by the Engineer-in-charge. (The pre-packed dry grout material consumed in the work shall be measured for payment.)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
0.1
-
-
Terrace Floor (As the part of Eighth floor)
0.1
-
-
Designing, Providing and fixing high strength tie rod assembly of SS316 grade at required locations at all heights, levels, inclinations including threading, clevises on each end conforming to ASTM A688 Class A and A473 Designation A, centrally located turnbuckles conforming to C1035 and SS316, Sleeve nuts, coupling nuts, conforming to ASTM nut specifications A563A, A194 2H and A563DH, pins, scafolding, staging, drilling, securing to the main structures and canopy structure, all accessories, periferals etc. complete as per approved shop drawings, as per specifications as directed by Engineer incharge.
-
-
-
From First (P02) Floor up to Second (P03) Floor
72
-
-
MISCELLANEOUS WORKS
-
-
-
Providing, fabricating & fixing of 16 millimeter thick 5 cells and 6 walls UV protected Multicell Polycarbonate Panel System over structural steel as per detailed architectural drawing including painting as required complete as detailed here under:The Co-extruded UV protected roofing / skylight sheet panels shall be as specified having minimum width of 1200 millimeter or as shown in detailed drawing, length can be made to order to minimise wastage, to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Sheet fixing shall be done with aluminium profiles as per detail sectional drawing, welding or gluing up of standing seam is not acceptable. Panels shall be fixed on purlins with Stainless steel retention clips of SS304 grade and connectors. Snap-on connectors to interlock the panels shall have a grip-lock double tooth locking mechanism to ensure maximum uplift capability. Panels shall have Polycarbonate End-cap/ Aluminium U-profile/ Glazing bar for ends as per requirement. The weight of the system shall not be less than 3.38 kilogram per square meter.The clamping profiles shall consists of base section and a compatible top section. All aluminium sections shall be powder coated as per detail schedule of finishes. The clamping shall have provision for water sealing, however silicone sealant shall be used for sealing intersection joints if any and other vulnerable joints as and where required etc. complete all as per approved shop drawings and as directed by the Engineer-in-charge. (Structural Steel shall be paid seperately)
In Roofing using 16 millimeter thick multi-wall or equivalent quality polycarbonate sheets in approved shade at all indicated locations.
-
-
-
From First (P02) Floor up to Second (P03) Floor
173
-
-
Cutting pockets in lift lobby walls or concrete members for fixing position indicator, hall lanterns, hall button etc., as per requirements of Elevator Installation Works and grouting in position the fittings, required for the Elevator Installation Works.
-
-
-
From Ground (P01) up to First (P02) Floor
6
-
-
From First (P02) Floor up to Second (P03) Floor
6
-
-
From Second (P03) Floor up to Third (P04) Floor
6
-
-
From Third (P04) Floor up to Forth (L01) Floor
6
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
6
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
6
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
6
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
6
-
-
From Eighth (L05) Floor up to Terrace Floor
6
-
-
Terrace Floor (As the part of Eighth floor)
6
-
-
PAINTING WORKS
-
-
-
Providing and applying plaster with plaster of paris in 6millimeter thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
230
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
226
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
226
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
226
-
-
From Eighth (L05) Floor up to Terrace Floor
192
-
-
Terrace Floor (As the part of Eighth floor)
109
-
-
Providing and applying Nerolac impression 24 carrat Luxury or equivalent approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface preparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC )
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2227
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2361
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2596
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
3230
-
-
From Eighth (L05) Floor up to Terrace Floor
2506
-
-
Terrace Floor (As the part of Eighth floor)
414
-
-
Providing and applying two coats of lead/zinc base oil paint/ bituminous paint of approved colour and shade to new wood work and fiber boards including preparing the surface, knotting, scaffolding if necessary, excluding primer coat etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4.6
-
-
From Ground (P01) up to First (P02) Floor
6.1
-
-
From First (P02) Floor up to Second (P03) Floor
4.8
-
-
From Second (P03) Floor up to Third (P04) Floor
4.8
-
-
From Third (P04) Floor up to Forth (L01) Floor
4.8
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
26.5
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
51.7
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
59.4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
61.2
-
-
From Eighth (L05) Floor up to Terrace Floor
177.4
-
-
Terrace Floor (As the part of Eighth floor)
5
-
-
Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the concrete/ plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4692
-
-
From Ground (P01) up to First (P02) Floor
3071
-
-
From First (P02) Floor up to Second (P03) Floor
2914
-
-
From Second (P03) Floor up to Third (P04) Floor
3374
-
-
From Third (P04) Floor up to Forth (L01) Floor
3374
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
131
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
120
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
131
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
131
-
-
From Eighth (L05) Floor up to Terrace Floor
170
-
-
Terrace Floor (As the part of Eighth floor)
100
-
-
Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4692
-
-
From Ground (P01) up to First (P02) Floor
3071
-
-
From First (P02) Floor up to Second (P03) Floor
2914
-
-
From Second (P03) Floor up to Third (P04) Floor
3374
-
-
From Third (P04) Floor up to Forth (L01) Floor
3374
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
131
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
120
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
131
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
131
-
-
From Eighth (L05) Floor up to Terrace Floor
170
-
-
Terrace Floor (As the part of Eighth floor)
100
-
-
Providing and applying two coats of Low VOC exterior acrylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1103
-
-
From Ground (P01) up to First (P02) Floor
855
-
-
From First (P02) Floor up to Second (P03) Floor
229
-
-
From Second (P03) Floor up to Third (P04) Floor
225
-
-
From Third (P04) Floor up to Forth (L01) Floor
225
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
1466.4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1538.2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1411.4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1429.4
-
-
From Eighth (L05) Floor up to Terrace Floor
1550.4
-
-
Terrace Floor (As the part of Eighth floor)
1122
-
-
Providing and applying self adhesive decorative wall paper of approved make, quality, design made of vinyl to walls with indistinguish joints including cutting, pasting, rolling, plaing including surface preparation, necessary independant staging, scaffolding, cleaning etc complete as per drawing as specified as directed by Engineer.
(Basic Cost shall be Rs. 225 per Square foot (Excluding GST)
-
-
-
From Eighth (L05) Floor up to Terrace Floor
859
-
-
FLOORING, SKIRTING & CLADDING WORKS
-
-
-
Providing and laying in situ cement concrete M30 with tremix treatment for 100 millimeter thickness for flooring with groove cutting of 4 millimeter wide and 20 millimeter deep with necessary refilling with bitumen etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1744
-
-
From Ground (P01) up to First (P02) Floor
1652
-
-
From First (P02) Floor up to Second (P03) Floor
1938
-
-
From Second (P03) Floor up to Third (P04) Floor
2376
-
-
From Third (P04) Floor up to Forth (L01) Floor
2376
-
-
Providing and mixing Multi Dimensional Graded Fibrillated 100% virgin polypropylene fibres at a dosage of at 125 grams. per Bag of cement per Cubic meter. and with ultimate flexural strength of 4.2 Mpa and mixing for 3 to 4 minutes etc. complete all as per the manufacturer's specifications and as directed by the Engineer-in-charge. The polypropylene fibers shall conform to ASTM C-1116 Type III, 4.1.3 and ASTM C-1018).
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1744
-
-
From Ground (P01) up to First (P02) Floor
1652
-
-
From First (P02) Floor up to Second (P03) Floor
1938
-
-
From Second (P03) Floor up to Third (P04) Floor
2376
-
-
From Third (P04) Floor up to Forth (L01) Floor
2376
-
-
Providing and laying polished hand cut Kotah Stone flooring 25 millimeter to 30 millimeter thick and 45centimeter to 55centimeter wide in plain/diamond pattern on a bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
162
-
-
From Ground (P01) up to First (P02) Floor
70
-
-
From First (P02) Floor up to Second (P03) Floor
51
-
-
From Second (P03) Floor up to Third (P04) Floor
51
-
-
From Third (P04) Floor up to Forth (L01) Floor
51
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
240
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
129
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
131
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
131
-
-
From Eighth (L05) Floor up to Terrace Floor
156
-
-
Terrace Floor (As the part of Eighth floor)
5
-
-
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 millimeter thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
40
-
-
From Ground (P01) up to First (P02) Floor
40
-
-
From First (P02) Floor up to Second (P03) Floor
40
-
-
From Second (P03) Floor up to Third (P04) Floor
40
-
-
From Third (P04) Floor up to Forth (L01) Floor
40
-
-
Providing and laying stone slab in one piece upto 1.5 meter length with machine cut edges for treads of steps with rounded nosing, engraving three nos., longitudinal grooves 25 millimeter apart (size 6 millimeter wide, 3 millimeter deep ) for treads including the under layer of 20 millimeter thick grey cement mortar of 1: 5 (1 cement : 5 coarse sand) mix, cement float pigmented to match the shade of the stone slab, filling joints with neat cement slurry leveling and matching coloured pigments & white cement, compaction, curing, rubbing, washing, cleaning etc. complete all as directed by the Engineer-in-charge.
Base rate for supply to be considered as Rs. 2433 per square meter on site delivered basis.(Excluding GST)
Treads in approved machine cut mirror pre-polished Granite stone slabs, minimum 20 millimeter thick.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
24
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
24
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
24
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
24
-
-
From Eighth (L05) Floor up to Terrace Floor
24
-
-
Providing and fixing stone slabs in risers on walls, columns, partitions, including 15millimeter thick cement mortar in 1:4 (1 cement : 4 coarse sand) backing coat, fixing with neat grey cement paste with matching pigment for joints, grooves as specified, joints to match with the line of floor joints, edge polishing, cleaning, curing etc., complete as per drawing and as directed by the Engineer-in-charge.
Base rate for supply to be considered as Rs. 2433 per square meter on site delivered basis.(Excluding GST)
Risers in approved machine cut mirror pre-polished Granite stone slabs, 20 millimeter thick.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
16
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
16
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
16
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
16
-
-
From Eighth (L05) Floor up to Terrace Floor
16
-
-
Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Skirting
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
150
-
-
From Ground (P01) up to First (P02) Floor
110
-
-
From First (P02) Floor up to Second (P03) Floor
90
-
-
From Second (P03) Floor up to Third (P04) Floor
90
-
-
From Third (P04) Floor up to Forth (L01) Floor
90
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
140
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
110
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
80
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
80
-
-
From Eighth (L05) Floor up to Terrace Floor
120
-
-
Terrace Floor (As the part of Eighth floor)
5
-
-
Providing and laying machine cut, pre-mirror polished Granite stone flooring 18 millimeter thick in required design and patterns, wherever required, in combination with granite stones of different colours and shades, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 millimeter thick stone slab over 20 millimeter (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry including pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge. Base rate for supply to be considered as Rs. 2433 per square meter on site delivered basis.(Excluding GST)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
47
-
-
From Ground (P01) up to First (P02) Floor
237
-
-
From First (P02) Floor up to Second (P03) Floor
47
-
-
From Second (P03) Floor up to Third (P04) Floor
47
-
-
From Third (P04) Floor up to Forth (L01) Floor
47
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
275
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
125
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
125
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
125
-
-
From Eighth (L05) Floor up to Terrace Floor
33
-
-
Providing and fixing Polished Granite stone, slab skirting, (as specified below), 100 millimeter high, of approved shade on walls, columns, partitions, including 15 millimeter thick backing coat of cement mortar in 1:3 (1 cement : 3 coarse sand), fixing with grey cement paste with matching pigment for joints, joints to match with the line of floor joints, edge polishing etc., complete as per drawings and details and as directed by the Engineer-in-charge.
Base rate for supply to be considered as Rs. 2433 per square meter on site delivered basis.(Excluding GST)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
From Ground (P01) up to First (P02) Floor
3
-
-
From First (P02) Floor up to Second (P03) Floor
3
-
-
From Second (P03) Floor up to Third (P04) Floor
3
-
-
From Third (P04) Floor up to Forth (L01) Floor
3
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
1
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1
-
-
From Eighth (L05) Floor up to Terrace Floor
1
-
-
Providing and fixing machine cut un-polished/rough stone strips 900 x 100 millimeter wide in flooring in pattern including 20 millimeter thick cement mortar 1:6 (1 cement : 6 coarse sand) bed, fixed in and grouted with grey cement slurry, cured, joints duly rubbed and cleaned all complete as per drawing as specified as directed by Engineer-in-charge.
-
-
-
Rough Granite stone strips for ramps
47
-
-
Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to 10 millimeter thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.
a) Flooring
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
1128
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1499
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1458
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1443
-
-
From Eighth (L05) Floor up to Terrace Floor
8
-
-
Providing and laying vitrified mirror / glossy finish tiles decorative type having size 1200 millimeter x 600 millimeter (nominal) and 10 to 12 millimeter thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc., complete as per drawings and details and as directed by the Engineer-in-charge. Base rate for supply to be considered as Rs. 755 per square meter on site delivered basis. (Excluding GST).
a) Flooring
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
189
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
165
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
165
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
165
-
-
Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimeter x 30 centimeter and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.
-
-
-
From Ground (P01) up to First (P02) Floor
4
-
-
From First (P02) Floor up to Second (P03) Floor
4
-
-
From Second (P03) Floor up to Third (P04) Floor
3
-
-
From Third (P04) Floor up to Forth (L01) Floor
3
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
79
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
79
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
85
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
90
-
-
From Eighth (L05) Floor up to Terrace Floor
56
-
-
Providing and laying Antiskid Ceramic tiles of approved quality of size 45 centimeter x 45 centimeter and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
125
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
282
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
125
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
125
-
-
From Eighth (L05) Floor up to Terrace Floor
162
-
-
Providing and fixing in flooring 10 millimeter thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding of 10 millimeter thick mortar 1:4 (1 acid proof cement : 4 coarse sand), and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.
Base rate for supply to be considered as Rs. 325 per square meter on site delivered basis. (Excluding GST)
-
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
21
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
21
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
21
-
-
From Eighth (L05) Floor up to Terrace Floor
24
-
-
Providing and fixing in dado/skirting 10 millimeter thick acid and/or alkali resistant tiles of approved make and colour including 15 millimeter thick backing coat of acid and/or alkali resisting cement mortar in 1:3 (1 acid proof cement : 3 coarse sand), and joints filled with acid and/or alkali resisting cement as per IS : 4457, joints to match with the line of floor joints, edge chamfering, polishing etc., complete as per drawings and details and as directed by the Engineer-in-charge.
Base rate for supply to be considered as Rs. 325 per square meter on site delivered basis. (Excluding GST)
-
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Providing and laying vitrified mirror / glossy finish tiles having size 590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to 10 millimeter thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.
b) Skirting
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
21
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
22
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
30
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
30
-
-
From Eighth (L05) Floor up to Terrace Floor
5
-
-
Providing and laying ceramic tiles having size 30 centimeter x 60 centimeter confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.
-
-
-
From Ground (P01) up to First (P02) Floor
45
-
-
From First (P02) Floor up to Second (P03) Floor
16
-
-
From Second (P03) Floor up to Third (P04) Floor
17
-
-
From Third (P04) Floor up to Forth (L01) Floor
17
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
324
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
395
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
395
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
395
-
-
From Eighth (L05) Floor up to Terrace Floor
280
-
-
Providing and laying ceramic tiles having size 30 centimeter x 45 centimeter confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
92
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
19
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
19
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
19
-
-
From Eighth (L05) Floor up to Terrace Floor
57
-
-
Providing and fixing homogeneous vitrified tiles of approved make or equivalent like JOHNSON, ORIENT BELL, EURO, NITCO, KAJARIA, quality & shade, in sizes and in pattern / combination as shown in drawings of Specified size (without warpage) in dados & wall cladding with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3millimeter thickness.; including 2 millimeter joint filling complete.
Base rate for supply to be considered as Rs. 650 per square meter on site delivered basis. (Excluding GST)
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
271
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
96
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
88
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
90
-
-
From Eighth (L05) Floor up to Terrace Floor
20
-
-
Providing sills of required material 20 millimeter to 25 millimeter thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. b) Granite
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
From Ground (P01) up to First (P02) Floor
3
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
7
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
6
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
7
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
7
-
-
From Eighth (L05) Floor up to Terrace Floor
7
-
-
Terrace Floor (As the part of Eighth floor)
1
-
-
Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimeter thick for door frame/ dado/ window boxing etc. On Cement mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
25
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
31
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
35
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
38
-
-
From Eighth (L05) Floor up to Terrace Floor
38
-
-
Providing and fixing machine cut mirror pre-polished stone slab (as specified below) in cladding in sizes and in pattern / in combination with other stones to vertical masonry / concrete surfaces wherever called for with slab of approved sizes, with machine cut edges, including backing coat of 20 millimeter thick cement mortar 1:4 (1 cement : 4 coarse sand), fixed in grey cement slurry pigmented to match the shade of stone slabs, cured, joints duly rubbed and polished complete including providing and installing gun metal cramps / pins of approved design with matching recesses in slab.
Cladding in approved Granite stone slab, 20 millimeter thick to internal surfaces.
Base rate for supply to be considered as Rs. 2433 per square meter on site delivered basis.(Excluding GST)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
78
-
-
From Ground (P01) up to First (P02) Floor
174
-
-
From First (P02) Floor up to Second (P03) Floor
63
-
-
From Second (P03) Floor up to Third (P04) Floor
63
-
-
From Third (P04) Floor up to Forth (L01) Floor
63
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
121
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
79
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
81
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
82
-
-
From Eighth (L05) Floor up to Terrace Floor
10
-
-
Providing & making kitchen / pantry platform as per drawing of size 600 millimeter wide and 800 millimeter high from finished floor level comprising of the following including curing, cleaning etc. complete all as directed.
a) Fixing 20 millimeter thick polished approved Granite stone slab counter / platform of approved quality placed over Kadappa stone slab at bottom with 20 millimeter thick cement mortar 1:4 bedding in between & neat cement float.
b) Fixing 20 millimeter thick polished black Kadappa stone vertical supports as shown in drawing (two number vertical slab per support) with 20 millimeter thick cement mortar 1:4 in between & neat cement float.
c) 100 millimeter wide, 20 millimeter thick horizontal and vertical, polished approved granite stone facia with rounded / chamfered edges fixed to the platform with cream of cement and araldite / approved tile adhesive.
d) Fixing both side polished, 20 millimeter thick black Kadappa stone shelves all as directed by the Engineer-in-charge.
Note : Plan area shall be measured for payment.
Base rate for supply of Granite stone slab to be considered as Rs. 2433 per square meter on site delivered basis.(Excluding GST)
Area of slab over 0.50 square meter.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1
-
-
From Eighth (L05) Floor up to Terrace Floor
1
-
-
Providing and constructing machine cut, pre-polished stone slab wash basin counter 600 millimeter wide, housed on brick masonry wall supports as per drawing, including edge moulding, edge polishing all necessary fixing accessories like pins, brackets, etc. cutting necessary holes in counter for fixing wash basin, pillar tap etc. complete all as per detailed drawing and as directed by the Engineer-in-charge.
a) Fixing 20 millimeter thick polished approved Granite stone slab counter of approved quality placed over Kadappa stone slab at bottom with 20millimeter thick cement mortar 1:4 bedding in between & neat cement float.
b) Fixing 20 millimeter thick polished black Kadappa stone supports as shown in drawing with 20 millimeter thick cement mortar 1:4 in between & neat cement float.
c) 100 millimeter wide, 20 millimeter thick horizontal and vertical, polished approved granite stone facia with rounded / chamfered edges fixed to the platform with cream of cement and araldite / approved tile adhesive.
Note : Plan area shall be measured for payment.
Wash Basin Counter in approved Granite stone slab, 20 millimeter thick
Base rate for supply of Granite stone slab to be considered as Rs. 2433 per square meter on site delivered basis.(Excluding GST)
Area of slab over 0.50 square meter
-
-
-
From Ground (P01) up to First (P02) Floor
0.5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
3
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
9
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
12
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
14
-
-
From Eighth (L05) Floor up to Terrace Floor
14
-
-
Providing and fixing machine cut mirror polished 18 millimeter to 20 millimeter thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete . Both side polish
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
4.4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4.4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
4.4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
4.4
-
-
From Eighth (L05) Floor up to Terrace Floor
3.3
-
-
Providing and fixing removable raised/false access flooring 300 millimeter Finished Floor Height (FFH) with system and its components of approved make for different plenum height with possible height adjustment upto 50 millimeter, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 millimeter and 25 millimeter outer diameter, fully welded on to the G.I. Base plate of size 100 millimeter x 100 millimeter x 3 millimeter at the bottom of the pedestal tube, G.I. pedestal head of size 75 millimeter x75 millimeter x3.5 millimeter welded with GI fully threaded stud 16 millimeter outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50millimeter, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80 millimeter thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge. c) Providing and fixing Access Floor panel of 600x600x32 millimeter medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones.
The top and bottom plates of Steel Gauges: top 0.6 millimeter and bottom 0.7 millimeter fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be corrosion resistant epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1millimeter thickness for superior adhesion and Surface flatness within 0.75 millimeter.The panel is to withstand a Concentrated Load of 363 kilograms applied on area 25 millimeter x 25 millimeter without collapse in the centre of the panel which is placed on four steel blocks.
The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kilograms /square meter and, an impact load of 50 kilogram all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.
-
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
18
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
18
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
18
-
-
Providing and laying cement concrete flooring 50 millimeter thick with M20 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 centimeter x 30 centimeter or other size laid diagonally/ square etc. finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Natural Sand
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
128
-
-
From Eighth (L05) Floor up to Terrace Floor
512
-
-
Providing and laying approved Anti-static machine tuffed pattern level nylon Graphic looped pile carpet, made out of pile yarn of required weight, of type 100 % Permacolour polypropylene, SRS Strain resistance system, 100 % Solution Dyed, Flammability ASTM E-648 flooring Radiant Panel - Class I , NBS Smoke Chamber Test -less than 450 (flaming) (tested as per ASTM-E-662), static property 3.5 KV or less (tested as per AATCC-134),, of required density, with specified stitches per inch, carpet thickness approx. 4 to 6millimeter, in available width installed strictly as per manufacturer's recommendations with approved adhesive SR-998, making cut outs for junction boxes etc. complete as directed by the Engineer-in-charge. Location of joints to be decided with prior approval of the Engineer and actual net area of carpet laid shall be measured for payment. Note :i) A warranty shall be submitted by the Contractor for a period of ten years from the certified date of completion for the satisfactory performance of the entire carpet flooring system. ii) The carpet should be with fire resistant, acoustical properties conforming to international standards. iii) Carpets must comply with 'CRI Green Label Plus Carpet Programme' iv) Adhesive with LOW VOC content should only be used. In enhanced graphic loop pile carpet STUDIO Z 6475 - Rock Scissors paper -00765 , (of SHAW make or approved equivalent) in approved shade. Base rate of carpet shall be Rs. 270- Per Square foot.(Excluding GST)
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
128
-
-
From Eighth (L05) Floor up to Terrace Floor
189
-
-
Providing and laying Engineered wooden flooring using planks 900millimeter x 118millimeter x 18millimeter thick (manufactured by Mikasa Flooring or approved equivalent) in approved design/ pattern including installing the planks using four side buckled "Click" system with tongue and groove mechanism, fixing specially manufactured underlay of 4millimeter thick foam layer, plastic film layer, preparing the surface prior to installation, all trims and accessories, edge profiles etc. complete as per manufacturer's specifications and as directed by the Engineer-in-charge.
(Base rate for supply to be considered as Rs.340 per square foot on site delivered basis. (Excluding GST).
-
-
-
From Eighth (L05) Floor up to Terrace Floor
323
-
-
Providing and laying matt finished wooden laminate skirting (upto 100millimeter high) using 900 millimeter x 118 millimeter x 18 millimeter size (maufactured by Mikasa or approved equivalent) including plain, dilation, transition or any other profiles as indicated, fixing the skirting with brass screws / approved adhesives complete in pattern etc. complete all as directed by the Engineer-in-charge.
-
-
-
From Eighth (L05) Floor up to Terrace Floor
23
-
-
Providing and laying machine cut, pre-mirror polished Agglomerate Marble stone flooring 18 millimeter thick in required design and patterns, wherever required, in combination with granite stones of different colours and shades, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 millimeter thick stone slab over 20 millimeter (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kilogram/square meter, including pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.
(Base rate for supply to be considered as Rs.350 per square foot on site delivered basis. (Excluding GST).
-
-
-
From Eighth (L05) Floor up to Terrace Floor
1183
-
-
Providing and laying Homogenious Vitrified TACTILE tiles of somany ceramics or approved equivalent having 300x300 millimeter of 8 to 10 millimeter thickness and confirming IS as per 15622:2006 & IS 4457:2007 (Group Bla) of approved make, shade and pattern for flooring in required position laid on bed of 1:4 cement mortar including neat cement float, filling joints with white cement slurry admixed with pigment of matching shade, curing and cleaning complete.
The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, including all leads, lifts at all levels. All material should be of approved make. All works complete as per Technical specification and direction of the Engineer-in-charge.
(Base rate for supply to be considered as Rs.30 per Square foot on site delivered basis. (Excluding GST).
-
-
-
From Ground (P01) up to First (P02) Floor
30
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
24
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
24
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
24
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
24
-
-
From Eighth (L05) Floor up to Terrace Floor
24
-
-
Providing and fixing Heat Resistant Terrace Tiles (300 millimeter x 300 millimeter) of Pavit or Thematek or approved equivalent make with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 millimeter thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 millimeter height along the parapet walls in the same manner.
(Base rate for supply to be considered as Rs.345 per Square meter on site delivered basis. (Excluding GST).
-
-
-
Terrace Floor (As the part of Eighth floor)
2134
-
-
CARPENTARY & JOINERY WORKS
-
-
-
Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimeter x 40 millimeter x 5 millimeter with oil painting, etc. complete
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
0.23
-
-
From Ground (P01) up to First (P02) Floor
0.3
-
-
From First (P02) Floor up to Second (P03) Floor
0.24
-
-
From Second (P03) Floor up to Third (P04) Floor
0.24
-
-
From Third (P04) Floor up to Forth (L01) Floor
0.24
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
0.37
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1.17
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1.11
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1.4
-
-
From Eighth (L05) Floor up to Terrace Floor
0.81
-
-
Terrace Floor (As the part of Eighth floor)
0.11
-
-
Providing and fixing door frames made in 18millimeter marine grade-1 plywood of approve make treated with anti-termite treatment, fixing to rough ground in position to jambs with heavy duty PVC rawl plugs and counter sunk flush bolts of approved size and quality minimum 6 numbers. per door (countersunk area of the frame shall be filled and finished to match as directed), exposed faces finished using 1 millimeter thick approved decorative laminate with approved high strength adhessive, un-exposed faces applied with approvd wooden primer including edge lipping & approved decorative moulding of second class teak wood, finished with LOW VOC synthetic enamel paint of approved make, quality,and of laminate matching shade to give smooth, even finish, cleaning, nails, rubbing, sanding, surface preparation, all complet as per drawings as specified and as directed by Engineer-in-charge.
(for payment exposed surface area of plywood frame shall be measured).
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
19
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
28
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
37
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
33
-
-
From Eighth (L05) Floor up to Terrace Floor
161
-
-
Providing and applying french polish to new wood work, for required finishing including. knotting, preparing the surfaces, scaffolding etc. complete as directed.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
7.5
-
-
From Ground (P01) up to First (P02) Floor
11.2
-
-
From First (P02) Floor up to Second (P03) Floor
7.5
-
-
From Second (P03) Floor up to Third (P04) Floor
7.5
-
-
From Third (P04) Floor up to Forth (L01) Floor
7.5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
52
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
36.7
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
34.7
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
43.8
-
-
From Eighth (L05) Floor up to Terrace Floor
25.6
-
-
Terrace Floor (As the part of Eighth floor)
3.7
-
-
Providing and fixing non-decorative type 35 millimeter thick flush door shutters of solid core block construction conforming to IS 2202 Part-I, comprising of stile frame, rails and internal lipping out of hardwood well seasoned and kiln dried, bonded with phenol formaldehyde synthetic resin, ply facing, finished as per details given below including internal / external 12 millimeter thick teak wood beading all around the edges of shutter, Both sides finished in approved laminate 1 millimeter thick (finished thickness 35+1+1), edge lipping finished with approved Low VOC synthetic enamel paint in approved shade, glass vision panels / aluminum louvers wherever required, all as shown in the drawing as required, necessary SS screws, etc. complete as per drawing as specified as directed by the Engineer-in-charge.
Note:i) The cost of labour for fixing builder's hardware and locking arrangement etc. shall also be included in this item.
ii) Glass vision panel and aluminium louvers shall be paid seperately under relevant item.
iii) Providing Builder's Hardware shall be paid seperately under relevant item.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From Ground (P01) up to First (P02) Floor
5.8
-
-
From First (P02) Floor up to Second (P03) Floor
1.9
-
-
From Second (P03) Floor up to Third (P04) Floor
3.3
-
-
From Third (P04) Floor up to Forth (L01) Floor
3.3
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
67.3
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
64.23
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
74.8
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
84.2
-
-
From Eighth (L05) Floor up to Terrace Floor
131.3
-
-
Providing and fixing 6 millimeter thick annealed clear float glass vision panel including making opening for vision panel of the required size and shape up to 0.20 square meter, lipping (on the cut edges of the opening) & moulded beading of second class teak wood, melamine polishing all complete as per drawing specified as directed by the Engineer-in-charge. (net area of glass panes excluding portion in rebate/ beading shall be measured for payment)
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2.4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
7
-
-
Providing and fixing 1 millimeter thick aluminium louver panel including making opening for louver panel of the required size and shape upto 0.2 square meter, lipping (on the cut edges of the opening) all complete as per drawing specified as directed by the Engineer-in-charge. (net area of louver panels excluding fixing leg shall be measured for payment)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
0.1
-
-
From Ground (P01) up to First (P02) Floor
0.1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
0.2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
0.2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
0.2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
0.2
-
-
From Eighth (L05) Floor up to Terrace Floor
0.2
-
-
Providing and fixing 2nd class teak wood architraves, cover mouldings of 50 x 20 millimeter section to door and window frames including melamine polishing etc. complete as directed.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
21.8
-
-
From Ground (P01) up to First (P02) Floor
32.5
-
-
From First (P02) Floor up to Second (P03) Floor
21.7
-
-
From Second (P03) Floor up to Third (P04) Floor
21.7
-
-
From Third (P04) Floor up to Forth (L01) Floor
21.7
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
150.6
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
106.3
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
100.6
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
126.8
-
-
From Eighth (L05) Floor up to Terrace Floor
74.3
-
-
Terrace Floor (As the part of Eighth floor)
10.8
-
-
IRONMONGERY FOR FLUSH DOOR
-
-
-
Providing and fixing Stainless steel AISI 304 grade satin finished iron mongery/door hardware as listed below, of approved make, finish and quality, as specified including drilling holes, necessary SS pins, SS washers, SS screws, nut-bolts all accessories etc complete as per manufacturer's specifications as directed by the Engineer-in-charge..
-
-
-
Providing and fixing Heavy duty butt hinges with two ball bearings (Item Code No : 9118 FF manufactured by Magnum or approved equivalent) of 125 millimeter x 76 millimeter x 3 millimeter thick etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
45
-
-
From Ground (P01) up to First (P02) Floor
45
-
-
From First (P02) Floor up to Second (P03) Floor
40
-
-
From Second (P03) Floor up to Third (P04) Floor
3
-
-
From Third (P04) Floor up to Forth (L01) Floor
3
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
184
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
166
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
186
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
204
-
-
From Eighth (L05) Floor up to Terrace Floor
324
-
-
Terrace Floor (As the part of Eighth floor)
3
-
-
Providing and fixing 450 millimeter brush finished 'D' type door handle (Item Code No : PH2518D manufactured by Magnum or approved equivalent) etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Ground (P01) up to First (P02) Floor
40
-
-
From First (P02) Floor up to Second (P03) Floor
8
-
-
From Second (P03) Floor up to Third (P04) Floor
8
-
-
From Third (P04) Floor up to Forth (L01) Floor
8
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
24
-
-
From Eighth (L05) Floor up to Terrace Floor
10
-
-
Providing and fixing 200 millimeter brush finished 'D' type door handle (Item Code No : PH1908D manufactured by Magnum or approved equivalent) etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
34
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
76
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
82
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
98
-
-
From Eighth (L05) Floor up to Terrace Floor
66
-
-
Providing and fixing Non-lockable sliding bolt (Item Code No : DA1921 manufactured by Magnum or approved equivalent) etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Ground (P01) up to First (P02) Floor
3
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
Providing and fixing SS brush finished Mortice dead lock (Item Code No. LB-50D SS + DDS-60KN ) manufactured by Magnum or approved equivalent) etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
17
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
14
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
16
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
16
-
-
From Eighth (L05) Floor up to Terrace Floor
44
-
-
Providing and fixing cylindrical door knob type handles with key & lock with push button latch system from inside, (Item Code No. ECL101ET ) manufactured by Magnum or approved equivalent) etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
From Ground (P01) up to First (P02) Floor
3
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
29
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
30
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
34
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
40
-
-
From Eighth (L05) Floor up to Terrace Floor
40
-
-
Providing and fixing Lockable sliding bolt (Aldrop) (Item Code No : DA1901-12 manufactured by Magnum or approved equivalent) etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
10
-
-
Providing and fixing Tower bolts 150 millimeter x 12millimeter (Item Code No. "TB1206 manufactured by Magnum or approved equivalent) etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
11
-
-
From Ground (P01) up to First (P02) Floor
11
-
-
From First (P02) Floor up to Second (P03) Floor
9
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
8
-
-
From Eighth (L05) Floor up to Terrace Floor
43
-
-
Terrace Floor (As the part of Eighth floor)
1
-
-
Providing and fixing Coat Hook (Item Code No. 6710) manufactured by Magnum or approved equivalent) etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Ground (P01) up to First (P02) Floor
3
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
7
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
10
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
12
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
14
-
-
From Eighth (L05) Floor up to Terrace Floor
16
-
-
Providing and fixing Indicator Bolt (Item Code No. DA1301) manufactured by Magnum or approved equivalent) etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Ground (P01) up to First (P02) Floor
3
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
7
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
10
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
12
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
14
-
-
From Eighth (L05) Floor up to Terrace Floor
16
-
-
Providing and fixing open type hydraulic door closer heavy duty (Item Code No. :TS 1000C) manufactured by GEZE or approved equivalent) with all accessories etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
6
-
-
From Ground (P01) up to First (P02) Floor
22
-
-
From First (P02) Floor up to Second (P03) Floor
4
-
-
From Second (P03) Floor up to Third (P04) Floor
4
-
-
From Third (P04) Floor up to Forth (L01) Floor
4
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
38
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
33
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
35
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
37
-
-
From Eighth (L05) Floor up to Terrace Floor
75
-
-
Providing and fixing Foot operated door stopper (Item Code No : DS 0803 of 'Magnum or approved equivalent make) with necessary CP brass screws etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
25
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
26
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
35
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
43
-
-
From Eighth (L05) Floor up to Terrace Floor
64
-
-
Providing & fixing PVC/ rubber door stop 75 millimeter long, (Item Code No. DS 1006) manufactured by Magnum or approved equivalent) etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
15
-
-
From Ground (P01) up to First (P02) Floor
15
-
-
From First (P02) Floor up to Second (P03) Floor
13.3
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
61.3
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
55.3
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
62
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
68
-
-
From Eighth (L05) Floor up to Terrace Floor
108
-
-
Providing and fixing mirror using 6 millimeter thick glass of superior quality with zero parallax of approved make, edge polished complete with 9 millimeter thick marine ply backing fixed with aluminium powder coated frame of approved shade, design, as per drawing including drilling, cutting, screws and washers, cleats, adhesive, sealent, all accessories,cleaning etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
18
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
15
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
17
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
19
-
-
From Eighth (L05) Floor up to Terrace Floor
18
-
-
IRONMONGERY FOR GLASS DOORS
-
-
-
Providing and fixing ironmongery as specified below of Stainless Steel grade 304 with specified finish of makes approved by the Architect, including screws, pins, washers etc all SS, GI nuts & bolts as per manufacturer's specifications as directed by the Engineer-in-charge. The samples of fixtures and fastenings shall be got approved by Engineer and Architect before procuring and fixing .
-
-
-
Providing and fixing SS Floor spring with top pivot (Item code No. FH-943+EFS ACC-001 manufactured by Assa Abloy or approved equivalent), with necessary long stud, SS screws, all accessories etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
From Ground (P01) up to First (P02) Floor
20
-
-
From First (P02) Floor up to Second (P03) Floor
4
-
-
From Second (P03) Floor up to Third (P04) Floor
4
-
-
From Third (P04) Floor up to Forth (L01) Floor
4
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
55
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
32
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
35
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
41
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Providing and fixing bottom lock patch (Item code No. EPF-1706 manufactured by Assa Abloy or approved equivalent), with necessary long stud, SS screws, all accessories etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
From Ground (P01) up to First (P02) Floor
20
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
Providing and fixing Central lock patch (Item code No. EPF-741 manufactured by Assa Abloy or approved equivalent), with necessary long stud, SS screws, all accessories etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
5
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
32
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
35
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
41
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Providing and fixing bottom patch (Item code No. EPF-702 manufactured by Assa Abloy or approved equivalent), with necessary long stud, SS screws, all accessories etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
From Ground (P01) up to First (P02) Floor
20
-
-
From First (P02) Floor up to Second (P03) Floor
4
-
-
From Second (P03) Floor up to Third (P04) Floor
4
-
-
From Third (P04) Floor up to Forth (L01) Floor
4
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
55
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
32
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
35
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
41
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Providing and fixing Top Patch (Item code No. EPF-701 manufactured by Assa Abloy or approved equivalent), with necessary long stud, SS screws, all accessories etc. complete as per manufacturer's specifications as directed by the Engineer-in-charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
From Ground (P01) up to First (P02) Floor
20
-
-
From First (P02) Floor up to Second (P03) Floor
4
-
-
From Second (P03) Floor up to Third (P04) Floor
4
-
-
From Third (P04) Floor up to Forth (L01) Floor
4
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
55
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
32
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
35
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
41
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Supply and Installation of fully insulated wooden fire door of NAVAIR or approved equivalent make of 120 minute. fire rating, of 52 millimeter thickness, comprising of 75 millimeter x 44 millimeter hardwood internal timber frame work, with infill insulation of 20 millimeter thick of of 48 kilogram/cubic meter, ceramic fiber blankets, coated with Viper FR intumuscent coating on both sides for insulation. The coated insulation shall be sandwiched between 12 millimeter thick Pamtech/Hilux Non Combustible (Calcium Silicate) Boards on both sides (edge to edge on internal Hardwood frame) and cladded with 3 millimeter Thick commercial ply and 1 millimeter thick Laminate of approved make/shade/quality on both sides, with 52 millimeter x 10 millimeter Hardwood lipping all round the shutter the main door frame will be made out of Hardwood (Red Mirandi) of section 120 x 70 millimeter and cotaed with Viper Fire reatrdent Primer. The rebate shall be of 20 millimeter x 55 millimeter in Door Frame to accommodate the shutter in frame. The frame hall be fitted with fire & smoke intumescent seal of size 10 x 4 millimeter on all the three sides except bottom and shutter shall be fitted with fire & smoke intumescent seal of size 20 x 4 millimeter on all the three sides except bottom. The pasting of the ply should be done using automatic machine. The board shall be Resistant to vermin, mould growth, minor impact, abrasion and short term water attack and shall be Off –white in colour with a smooth surface suitable to receive most forms of decoration. The Construction design shall be similar to the design tested as per BS 476 part 22 and IS 3614 Part II, at CBRI, India. The shutter is provided with appropriate openings for view panel glass, if required. Prototype Test certificate for fire rating of doors from CBRI, Roorkee for earlier tested design shall be attached along with manufacturers test certificate. All wood work primed with fire retardant primer.
1000 X 2200 millimeter - Single Leaf - FIRE STAIRCASE
Rate should be inclusive of Door Frame, Door Shutter, FR Hardwares and FR Glass as Follows:-
i) 1000 X 2200 millimeter - Single Leaf
ii) SS Ball Bearing Hinges 100 x 75 x 3 millimeter of Becker F.S Make - 04 No. Per Leaf
iii) Overhead door closers with Std Arm of Becker F.S Make - 01 No. Per Leaf
iv) Single Leaf One Point Panic Bar of Becker F.S Make - 01 No. Per Door
v) Panic Trim of Becker F.S make - 01 No. Per Door
vi) Vision panel of Size 200 x 300 millimeter fitted with 5 millimeter thick FR Glass Keralite of Saint Gobain Make -01 No. Per Leaf
viii) Intumescent Fire seal of Size 20 x 4 millimeter for Frame - 5
ix) anchor fastners of HILTI Make Equvalent of maximum 80 millimeter length. - as per door size - 9 nos
etc. complete as per approved drawings specifications as directed by engineer incharge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
3.97
-
-
From Ground (P01) up to First (P02) Floor
3.97
-
-
From First (P02) Floor up to Second (P03) Floor
3.97
-
-
From Second (P03) Floor up to Third (P04) Floor
3.97
-
-
From Third (P04) Floor up to Forth (L01) Floor
3.97
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
3.97
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
7.95
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
3.97
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
3.97
-
-
From Eighth (L05) Floor up to Terrace Floor
3.97
-
-
Terrace Floor (As the part of Eighth floor)
3.97
-
-
Supply and Installation of fully insulated wooden fire door of NAVAIR or approved equivalent make of 120 minute. fire rating, of 52 millimeter thickness, comprising of 75 millimeter x 44 millimeter hardwood internal timber frame work, with infill insulation of 20millimeter thick of of 48 Kilogram/Cubic meter, ceramic fiber blankets, coated with Viper FR intumuscent coating on both sides for insulation. The coated insulation shall be sandwiched between 12 millimeter thick Pamtech/Hilux Non Combustible (Calcium Silicate) Boards on both sides (edge to edge on internal Hardwood frame) and cladded with 3 millimeter Thick commercial ply and 1 millimeter thick Laminate of approved make/shade/quality on both sides, with 52millimeter x 10 millimeter Hardwood lipping all round the shutter the main door frame will be made out of Hardwood (Red Mirandi) of section 120 x 70 millimeter and cotaed with Viper Fire reatrdent Primer. The rebate shall be of 20 millimeter x 55 millimeter in Door Frame to accommodate the shutter in frame. The frame hall be fitted with fire & smoke intumescent seal of size 10 x 4 millimeter on all the three sides except bottom and shutter shall be fitted with fire & smoke intumescent seal of size 20 x 4 millimeter on all the three sides except bottom. The pasting of the ply should be done using automatic machine. The board shall be Resistant to vermin, mould growth, minor impact, abrasion and short term water attack and shall be Off –white in colour with a smooth surface suitable to receive most forms of decoration. The Construction design shall be similar to the design tested as per BS 476 part 22 and IS 3614 Part II, at CBRI, India. The shutter is provided with appropriate openings for view panel glass, if required. Prototype Test certificate for fire rating of doors from CBRI, Roorkee for earlier tested design shall be attached along with manufacturers test certificate. All wood work primed with fire retardant primer.
900 X 2200 millimeter - Single Leaf - ELECTRICAL ROOM/ HUB ROOM/PASSAGE
Rate should be inclusive of Door Frame, Door Shutter, Hardwares and FR Glass as Follows:-
i) 900 X 2200 millimeter - Single Leaf -
ii) SS Ball Bearing Hinges 100 x 75 x 3 millimeter of Becker F.S Make - 04 No. Per Leaf
iii) Overhead door closers with Std Arm of Becker F.S Make - 01 No. Per Leaf
iv) Motise Dead Lock with 80 millimeter Long Cylinder both side operation of Becker F.S Make - 01 No. Per Door
v) SS 'D' shape Pull handle of size 300x19 millimeter Diameter of Becker F.S Make ( B2B) - 01 Set Per Leaf
vi) Vision panel of Size 200 x 300 millimeter fitted with 5 millimeter thick FR Glass Keralite of Saint Gobain Make -01 No. Per Leaf
vii) Intumescent Fire seal of Size 10 x 4 millimeter for Frame - 11
viii) Intumescent Fire seal of Size 20 x 4 millimeter for Frame - 5
ix) anchor fastners of HILTI Make Equvalent of maximum 80 millimeter length. - as per door size - 9 nos
etc. complete as per approved drawings specifications as directed by engineer incharge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
1.77
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
5.3
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
5.3
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
5.3
-
-
From Eighth (L05) Floor up to Terrace Floor
1.77
-
-
Supply and Installation of fully insulated wooden fire door of NAVAIR or approved equivalent make of 120 minute fire rating, of 52 millimeter thickness, comprising of 75 millimeter x 44 millimeter hardwood internal timber frame work, with infill insulation of 20 millimeter thick of of 48 kilogram/cubic meter, ceramic fiber blankets, coated with Viper FR intumuscent coating on both sides for insulation. The coated insulation shall be sandwiched between 12 millimeter thick Pamtech/Hilux Non Combustible (Calcium Silicate) Boards on both sides (edge to edge on internal Hardwood frame) and cladded with 3 millimeter Thick commercial ply and 1 millimeter thick Laminate of approved make/shade/quality on both sides, with 52 millimeter x 10 millimeter Hardwood lipping all round the shutter the main door frame will be made out of Hardwood (Red Mirandi) of section 120 x 70 millimeter and cotaed with Viper Fire reatrdent Primer. The rebate shall be of 20 millimeter x 55 millimeter in Door Frame to accommodate the shutter in frame. The frame hall be fitted with fire & smoke intumescent seal of size 10 x 4 millimeter on all the three sides except bottom and shutter shall be fitted with fire & smoke intumescent seal of size 20 x 4 millimeter on all the three sides except bottom. The pasting of the ply should be done using automatic machine. The board shall be Resistant to vermin, mould growth, minor impact, abrasion and short term water attack and shall be Off –white in colour with a smooth surface suitable to receive most forms of decoration. The construction design shall be similar to the design tested as per BS 476 part 22 and IS 3614 Part II, at CBRI, India. The shutter is provided with appropriate openings for view panel glass, if required. Prototype Test certificate for fire rating of doors from CBRI, Roorkee for earlier tested design shall be attached along with manufacturers test certificate. All wood work primed with fire retardant primer.
1200 X 2200 Millimeter - Single Leaf - SERVICE LIFT LOBBY
Rate should be inclusive of Door Frame, Door Shutter, Hardwares and FR Glass as Follows:-
i) 1200 X 2200 Millimeter - Single Leaf -
ii) SS Ball Bearing Hinges 100 x 75 x 3 millimeter of Becker F.S Make - 04 No. Per Leaf
iii) Overhead door closers with Std Arm of Becker F.S Make - 01 No. Per Leaf
iv) Motise Dead Lock with 80 millimeter Long Cylinder both side operation of Becker F.S Make - 01 No. Per Door
v) SS 'D' shape Pull handle of size 300x19 millimeter Diameter of Becker F.S Make ( B2B) - 01 Set Per Leaf
vi) Vision panel of Size 200 x 300 millimeter fitted with 5 millimeter thick FR Glass Keralite of Saint Gobain Make -01 No. Per Leaf
vii) Intumescent Fire seal of Size 10 x 4 millimeter for Frame - 11
viii) Intumescent Fire seal of Size 20 x 4 millimeter for Frame - 5
etc. complete as per approved drawings specifications as directed by engineer incharge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2.4
-
-
From Ground (P01) up to First (P02) Floor
2.4
-
-
From First (P02) Floor up to Second (P03) Floor
2.4
-
-
From Second (P03) Floor up to Third (P04) Floor
2.4
-
-
From Third (P04) Floor up to Forth (L01) Floor
2.4
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2.4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4.2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2.4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2.4
-
-
From Eighth (L05) Floor up to Terrace Floor
2.4
-
-
Providing and fixing non-decorative type 75 millimeter nominal thick acoustic flush door shutters of STC rating 55 of solid core block construction conforming to IS 2202 Part-I, comprising of stile frame, rails and internal lipping out of hardwood well seasoned and kiln dried, bonded with phenol formaldehyde synthetic resin, superior quality ply facing, finished as per details given below including internal / external 12millimeter thick teak wood beading all around the edges of shutter, door frame of teak of section size 150 x 110 millimeter, shape as shown in drawings as specified , making necessary grooves in the frame for fixing of hollow bulb type EDPM gaskets on rebates to block noise leakage from gap in between door frame and shutter.
The frame of shutter shall be made from 40 millimeter thick hard wood stiles and top & bottom rails of size 94 millimeter and core made of lock rail 100 millimeter wide and 40 millimeter thick and three additional strips 50 millimeter wide and 25 millimeter thick (minimum)The core of door shutter shall be filled with 50millimeter thick acoustic insulation material ,anti donning layer, sound absorbing and damping material,Face panels shall be of 12 millimeter thick Marine ply boards of approved make conforming to relevant IS codes / International Standards on both sides of the core of the shutter with required primer at the unexposed surface.one side of ply board shall be fixed to the core of the shutter along with a one layer STC MTS 3MM & STC MTS 2 millimeter additional Sound damping sheet rubber interlayer (Neoprene rubber sheet or approved equivalent) on its inner face.Both sides finished in approved laminate 1millimeter thick (finished thickness 75+1+1) by using high strength cross linked PVAC based adhesive Korlok 472‟ of National or “Fevicol SWR” of Pidilite industries ltd as per manufacturer‟s specifications
Note:
i) Rate should be inclusive of door frame.
ii) The door assembly shall be fixed to the door frame with heavy duty hardware i.e.ASSABLOY or approved equivalent make SS Hinge Size: 5”x 4”x 3millimeter , 600 millimeter SS door handle , SSTower bolt and Mortise door lock .
iii) Vision panel of size - 200 x 750 per Shutter.
etc. complete as per approved drawings specifications as directed by engineer incharge.
Door Size -1000 X 2200 millimeter - Single Leaf
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
7.95
-
-
From Eighth (L05) Floor up to Terrace Floor
8.3
-
-
Providing and fixing non-decorative type 75millimeter nominal thick acoustic flush door shutters of STC rating 55 of solid core block construction conforming to IS 2202 Part-I, comprising of stile frame, rails and internal lipping out of hardwood well seasoned and kiln dried, bonded with phenol formaldehyde synthetic resin, superior quality ply facing, finished as per details given below including internal / external 12millimeter thick teak wood beading all around the edges of shutter, door frame of teak of section size 150 x 110 millimeter, shape as shown in drawings as specified , making necessary grooves in the frame for fixing of hollow bulb type EDPM gaskets on rebates to block noise leakage from gap in between door frame and shutter.The frame of shutter shall be made from 40 millimeter thick hard wood stiles and top & bottom rails of size 94 millimeter and core made of lock rail 100 millimeter wide and 40 millimeter thick and three additional strips 50 millimeter wide and 25 millimeter thick (minimum).The core of door shutter shall be filled with 50millimeter thick acoustic insulation material ,anti donning layer, sound absorbing and damping material,Face panels shall be of 12 millimeter thick Marine ply boards of approved make conforming to relevant IS codes / International Standards on both sides of the core of the shutter with required primer at the unexposed surface.one side of ply board shall be fixed to the core of the shutter along with a one layer STC MTS 3MM & STC MTS 2 millimeter additional Sound damping sheet rubber interlayer (Neoprene rubber sheet or approved equivalent) on its inner face.Both sides finished in approved laminate 1millimeter thick (finished thickness 75+1+1) by using high strength cross linked PVAC based adhesive Korlok 472‟ of National or “Fevicol SWR” of Pidilite industries ltd as per manufacturer‟s specifications,
Note:
i) Rate should be inclusive of door frame.
ii) The door assembly shall be fixed to the door frame with heavy duty hardware i.e.ASSABLOY or approved equivalent make SS Hinge Size: 5”x 4”x 3millimeter , 600 millimeter SS door handle , SSTower bolt and Mortise door lock .
iii) Vision panel of size - 200 x 750 per Shutter.etc. complete as per approved drawings specifications as directed by engineer incharge.
Door Size - 1500 X 2200 millimeter - Double Leaf
-
-
-
From Eighth (L05) Floor up to Terrace Floor
3.17
-
-
ALUMINIUM DOORS AND WINDOW WORKS
-
-
-
General notes- As per IGBC norms following requirements shall be fulfilled-
i) Aluminum sections used in the fenestration shall have a recycled content in the range of 10% to 30%
ii) Door-Window glazing shall also be procured with recycled content of nearly 18%
-
-
-
Providing and fixing in position (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 millimeter at weight 0.547 Kilogram/meter. and window frame bottom track section 61.85 x 31.75 x 1.20 millimeter at weight 0.695 Kilogram/meter. Top and side track section 61.85 x 31.75 x 1.30 millimeter at weight 0.659 Kilogram/meter. The shutter should be of bearing bottom 40 x 18 x 1.25 millimeter at weight 0.417 Kilogram/meter. Inter locking section 40 x 18 x 1.10 millimeter at weight 0.469 Kilogram/meter. And handle section 40 x 18 x 1.25 millimeter at weight 0.417 Kilogram/meter. and top section 40 x 18 x 1.25 millimeter at weight 0.417 Kilogram/meter. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimeter thick plain glass with all required screws and nuts etc, complete. With colour Anodising without box (Window W1, W8, W9)
-
-
-
From Ground (P01) up to First (P02) Floor
15.8
-
-
From First (P02) Floor up to Second (P03) Floor
1.8
-
-
From Second (P03) Floor up to Third (P04) Floor
1.8
-
-
From Third (P04) Floor up to Forth (L01) Floor
1.8
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
5.4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1.8
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
3.6
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
3.6
-
-
From Eighth (L05) Floor up to Terrace Floor
3.6
-
-
Providing and fixing part fixed part openable top hung windows in required sizes with aluminium frames with 25micron anodised (as per IS 1868/1982) of approved shade, 6millimeter toughened clear glass including self balancing frictions hinges, hardware, locking arrangements , making provision for fixing of exhaust fan etc. all as per approved shop drawings and as directed by Engineer in charge. All accessories and hardware shall be of SS 304 grade. (Ventilator W2)
-
-
-
From Ground (P01) up to First (P02) Floor
0.5
-
-
From First (P02) Floor up to Second (P03) Floor
0.5
-
-
From Second (P03) Floor up to Third (P04) Floor
0.5
-
-
From Third (P04) Floor up to Forth (L01) Floor
0.5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
0.5
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1.1
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2.2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
3.2
-
-
From Eighth (L05) Floor up to Terrace Floor
5.4
-
-
Providing and fixing part fixed part openable window with three track sliding shutters and fixed aluminium 'Z' type louvers blades of 4millimeter thick extruded aluminium in approved colour and with ample rigidity within extruded shape and with concealed stiffener, supports in approved spacing with an assumed efficiency of 50% in required sizes with aluminium frames with 25micron anodised (as per IS 1868/1982) of approved shade, 6millimeter toughened clear glass including, SS mosquito proofing wire mesh internally, all aluminium brackets, aluminium frames and sub-frames, approved fixing arrangement to main structure, etc. complete as per approved shop drawings and specifications, locking arrangements, etc. all as per approved shop drawings and as directed by Engineer in charge. All accessories and hardware shall be of SS 304 grade. (Windows W6, W7)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
22.7
-
-
From Ground (P01) up to First (P02) Floor
22.7
-
-
From First (P02) Floor up to Second (P03) Floor
22.7
-
-
From Second (P03) Floor up to Third (P04) Floor
22.7
-
-
From Third (P04) Floor up to Forth (L01) Floor
22.7
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
35.9
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
24.6
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
35.9
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
35.9
-
-
From Eighth (L05) Floor up to Terrace Floor
73.7
-
-
Terrace Floor (As the part of Eighth floor)
22.7
-
-
Providing and fixing part fixed part openable two top hung shutter windows in required sizes with aluminium frames with 25micron anodised (as per IS 1868/1982) of approved shade, 6millimeter toughened clear glass including self balancing frictions hinges, hardware, locking arrangements , making provision for fixing of exhaust fan etc. all as per approved shop drawings and as directed by Engineer in charge. All accessories and hardware shall be of SS 304 grade. (Ventilator V1)
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
1
-
-
Providing and fixing openable two top hung shutter windows in required sizes with aluminium frames with 25micron anodised (as per IS 1868/1982) of approved shade, 6millimeter toughened clear glass including self balancing frictions hinges, hardware, locking arrangements etc. all as per approved shop drawings and as directed by Engineer in charge. All accessories and hardware shall be of SS 304 grade. (Ventilator V2)
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
6
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
6
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
6
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
6
-
-
From Eighth (L05) Floor up to Terrace Floor
4
-
-
Design, supplying and installing fixed type 35 micron PVDF coated aluminium louvered panels using 'Z' louver blades of 4millimeter thick extruded aluminium in approved colour and with ample rigidity within extruded shape and with concealed stiffener, supports in approved spacing with an assumed efficiency of 50%, including SS mosquito proofing wire mesh internally, all aluminium brackets, aluminium frames and sub-frames, approved fixing arrangement to main structure, etc. complete as per approved shop drawings and specifications and as directed by Engineer in charge. (Ventilators V3, V4)
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor - Ventilator V3
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor - Ventilator V4
4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor- Ventilator V4
4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor- Ventilator V4
4
-
-
From Eighth (L05) Floor up to Terrace Floor - Ventilator V3
2
-
-
FIRE RATED DOORS - STEEL & ROLLING SHUTTERS
-
-
-
Supply and installation of Hollow metal fire rated doors as per IS 3614 part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall have doors tested at CBRI for maximum rating of 2hrs tested. Individual Test certificates should also be available for glass used in vision lites confirming the required fire ratings /panels being a part of the fire door assembly. Doors should be finished in Thermosetting Powder Coating desired RAL Shades. Manufacturer test certificate shall cover doors both single & double leaf doors and Hardwares should pass European certificate "CE" of conformity / UL with required fire ratings.Any deviation in specification and sheet thickness other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory.Door frame shall be double rebate profile of minimum size 154millimeter X 77 millimeter made out of 1.50millimeter minimum thick galvanized steel sheet. NDRF 154x77 Frames shall be Butt jointed and field assembled with self bolted. The frames should be finished with Thermosetting Powder Coating in desired RAL Shade. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening.Door leaf shall be minimum 49millimeter thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 1.00millimeter minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Rockwool treated with Viper FRS 881 LH. All doors NSD 12049 shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4millimeter. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturers recommendation with a beeding and screws from inside. However the glass should be 5 millimeter of minimum size 200millimeter x 300millimeter clear 120 min fire rated of Saint Gobain.
Rate should be inclusive of Door Frame, Door Shutter, Hardwares and FR Glass as Follows:-800 X 1400 millimeter - Single Leaf - L05 - FHR Shaft- i) SS Ball Bearing Hinges 100 x 75 x 3millimeter of Becker F.S Make - 03 No. Per Leaf
ii) Allenkey Shaft Lock of Becker F.S Make - 01 No. Per Door iii)MS Powder Coated Flush Pull handle - 01 No. Per Leaf iv) Vision panel of Size 200 x 300millimeter fitted with 5millimeter thick FR Glass Keralite of Saint Gobain Make -01 No. Per Leaf v) Supply of Ceremic Gasket - 2.5 vi) Supply of anchor fastners of HILTI Make Equvalent of maximum 80millimeter length. - as per door size -9 Per Door etc. complete as per approved drawings specifications as directed by engineer incharge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
0.96
-
-
From Ground (P01) up to First (P02) Floor
0.96
-
-
From First (P02) Floor up to Second (P03) Floor
0.96
-
-
From Second (P03) Floor up to Third (P04) Floor
0.96
-
-
From Third (P04) Floor up to Forth (L01) Floor
0.96
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
1.9
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1.9
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1.92
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1.92
-
-
From Eighth (L05) Floor up to Terrace Floor
1.92
-
-
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 millimeter with lock plate of 3.15 millimeter thickness reinforced with 35 x 35 x 5 millimeter angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 millimeter and 3.15 millimeter respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 millimeter minimum size and shape with square bar, suspension shaft of minimum 32 millimeter diameter, hood cover of M.S. sheet not less than 0.9 millimeter thickness and of any size at top and safety devices one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)
-
-
-
From Ground (P01) up to First (P02) Floor
4.8
-
-
Supplying and fixing standard steel Motorised rolling shutters fully grilled made out of 8millimeter dia round bars connected with 20x6millimeter thick flat bars all made out of mild steel of approved quality mounted on specially designed pipe shaft including all accessories such as top cover of required size, side guides of size 63.5millimeter x 25.4millimeter made out of 10 Gauge thick plate and 'L' reinforced angle iron fixed outside brackets, suspension shafts, top rolling springs made out of strong and best tested continental spring, hood covers made out of mild steel sheets not less than 0.9millimeter thick, bottom rails, locking arrangements, including ball bearings, applying two coats of approved LOW VOC synthetic enamel paint over a coat of zinc chromate primer etc. complete all as per specifications.
(Measurement shall be on the clear width and clear height of the opening for the rolling shutters).
-
-
-
From Ground (P01) up to First (P02) Floor
9.6
-
-
Providing and fixing GI doors made with 120GSm GI sheet with fixed type 65 micron Powder coated GI louvered panels using 'Z' louver blades of 0.6millimeter thick GI in approved colour and with ample rigidity within shape and with concealed stiffener, supports in approved spacing with an assumed efficiency of 50%, including SS mosquito proofing wire mesh internally, all brackets, GI frames and sub-frames, approved fixing arrangement to main structure, etc. complete as per approved shop drawings and specifications.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
26.3
-
-
From Ground (P01) up to First (P02) Floor
21.9
-
-
From First (P02) Floor up to Second (P03) Floor
21.9
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
11.5
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
11.5
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
11.5
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
11.5
-
-
From Eighth (L05) Floor up to Terrace Floor
11.5
-
-
GLAZING & CLADDING WORKS
-
-
-
Design, supplying and installing semi unitized glazing system in linear/curvilinear planes with frame work (all four sides of glass held by structural sealant) including mullions, transoms, trims, etc., 35 micron PVDF coated Aluminium extrusions in approved shade and make, Chromotised Aluminium brackets / clamps of grade 6061-T6 or 6005-T6 conforming to ASTM : GS11A, approved expansion fasteners with stainless steel bolts, nuts, shims, and washers; silicon gaskets; continuous glass support blocks, drainage provision; with minimum three layer vapour defense mechanisms, weather seals, flashing and seals at all interfaces with building structure, bird/vermin proof closer and PVDF coated aluminium flashings bent to profile, made of single piece and fixed in slope at all heights, levels, and locations etc. complete as per approved shop drawings and specifications in vision and spandrel areas.
Hermetically sealed 6-12-5 millimeter double glazed vision panel units of Green shade of approved make and shade conforming to performance charecteristics as specified in the technical specifications, comprising an outer heat strengthened 6millimeter thick glass hard coated on surface #2 and inner heat strengthened 5millimeter thick clear float glass with Low-E coated on surface #4, spacers, desiccants, primary and secondary seals, as specified including structural silicon sealant etc. all complete as per approved shop drawing and specification as directed by engineer-in-charge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
216
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
245
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
243
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
239
-
-
From Eighth (L05) Floor up to Terrace Floor
242
-
-
Spandrel glass panels comprising of 6millimeter thick heat strengthened hard coated glass panels of approved make and shade conforming to performance charecteristics as specified in the technical specifications with opacifier coating as specified on surface #2 to retain original glass colour matching with vision area, structural sealant etc. all complete as per approved shop drawings and specifications. The item also includes shadow boxes for housing thermal insulation including providing & fixing glass wool in spandrel units as per specification including smoke seals, sound insulationetc. all complete as per approved shop drawing and specification as directed by engineer-in-charge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
48
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
54
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
54
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
53
-
-
From Eighth (L05) Floor up to Terrace Floor
54
-
-
Providing and fixing openable doors in required sizes in the glazing system including providing additional frames, self balancing frictions hinges, hardware, locking arrangements etc. all as per approved makes , approved shop drawings. The opening frames shall be indistinguishable from fixed frames for a consistent look and shall be accommodated in the vision area. All accessories and hardware shall be of SS 304 grade/ approved imported etc. all complete as per approved shop drawing and specification as directed by engineer-in-charge.
(Glazing and main frame shall be paid under item relevent item above)
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
31.7
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
31.7
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
31.7
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
31.7
-
-
From Eighth (L05) Floor up to Terrace Floor
31.7
-
-
Design, supplying and installing semi unitized glazing system with frame work (all four sides of glass held by structural sealant) including mullions, transoms, trims, etc., 35 micron PVDF coated Aluminium extrusions in approved shade and make, Chromotised Aluminium brackets / clamps of grade 6061-T6 or 6005-T6 conforming to ASTM : GS11A, approved expansion fasteners with stainless steel bolts, nuts, shims, and washers; silicon gaskets; continuous glass support blocks, drainage provision; with minimum three layer vapour defense mechanisms, weather seals, flashing and seals at all interfaces with building structure, bird/vermin proof closer and PVDF coated aluminium flashings bent to profile, made of single piece and fixed in slope at all heights, levels, and locations etc. complete as per approved shop drawings and specifications in vision and spandrel areas.
Hermetically sealed 6-12-5 millimeter double glazed vision panel units of Green shade of approved make and shade conforming to performance charecteristics as specified in the technical specifications, comprising an outer heat strengthened 6millimeter thick glass hard coated on surface #2 and inner heat strengthened 5millimeter thick clear float glass with Low-E coated on surface #4, spacers, desiccants, primary and secondary seals, as specified including structural silicon sealant, self balancing heavy duty frictions hinges, hardware, locking arrangements , etc. all complete as per approved shop drawing and specification as directed by engineer-in-charge. fixed in Part fixed part openable top hung shutter window - W3 and W4
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
45.7
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
17.96
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
17.96
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
17.96
-
-
Design, supplying and installing semi unitized glazing system with frame work (all four sides of glass held by structural sealant) including mullions, transoms, trims, etc., 35 micron PVDF coated Aluminium extrusions in approved shade and make, Chromotised Aluminium brackets / clamps of grade 6061-T6 or 6005-T6 conforming to ASTM : GS11A, approved expansion fasteners with stainless steel bolts, nuts, shims, and washers; silicon gaskets; continuous glass support blocks, drainage provision; with minimum three layer vapour defense mechanisms, weather seals, flashing and seals at all interfaces with building structure, bird/vermin proof closer and PVDF coated aluminium flashings bent to profile, made of single piece and fixed in slope at all heights, levels, and locations etc. complete as per approved shop drawings and specifications in vision and spandrel areas.
Hermetically sealed 6-12-5 millimeter double glazed vision panel units of Green shade of approved make and shade conforming to performance charecteristics as specified in the technical specifications, comprising an outer heat strengthened 6millimeter thick glass hard coated on surface #2 and inner heat strengthened 5millimeter thick clear float glass with Low-E coated on surface #4, spacers, desiccants, primary and secondary seals, as specified including structural silicon sealant,fixed aluminium 'Z' type louvers blades of 4millimeter thick extruded aluminium in approved colour and with ample rigidity within extruded shape and with concealed stiffener, supports in approved spacing with an assumed efficiency of 50% in required sizes with aluminium frames with 25micron anodised (as per IS 1868/1982) of approved shade, including, SS mosquito proofing wire mesh internally, all aluminium brackets, aluminium frames and sub-frames, approved fixing arrangement to main structure, etc. complete as per approved shop drawings specifications as directed by engineer-in-charge.
fixed in Part fixed glazed part aluminium lovered windows - W5
-
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
28.35
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
28.35
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
28.35
-
-
Providing and fixing 35 micron PVDF coated hollow rectangular aluminium section 100x50x3millimeter weighting 2.332kg/meter Cat. no.14064 of Jindal or approved equivalent in vertical fins externally, fixed at top & bottom mechanically to MS ISA 75x75x5millimeter 100millimeter long cleats anticorrosion coated and finished with two or more coats of Enamel paint of approved make, shade, quality secured to concrete surface through anchor fasteners of approved quality and strength, and transom including scaffolding, stagging, at all heights, levels, cleaning all complete as per approved shop drawing as specified as directed by engineer-in-charge. (MS steel work shall be paid seperately)
-
-
-
From Third (P04) Floor up to Forth (L01) Floor
55.6
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
55.6
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
55.6
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
55.6
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
55.6
-
-
From Eighth (L05) Floor up to Terrace Floor
55.6
-
-
Providing and fixing 35 micron PVDF coated hollow rectangular aluminium section 100x50x3millimeter weighting 2.332kg/meter Cat. no.14064 of Jindal or approved equivalent in horizontal externally, fixed mechanically to MS ISA 75x75x5millimeter suspenders anticorrosion coated and finished with two or more coats of Enamel paint of approved make, shade, quality secured to concrete surface through anchor fasteners of approved quality and strength, and transom including scaffolding, stagging, at all heights, levels, cleaning etc. complete as per approved shop drawings specifications as directed by engineer-in-charge etc.
(MS steel work shall be paid seperately)
-
-
-
From Third (P04) Floor up to Forth (L01) Floor
149.6
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
149.6
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
149.6
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
149.6
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
149.6
-
-
From Eighth (L05) Floor up to Terrace Floor
149.6
-
-
Providing and fixing fixed type aluminium 'Z' type louvers blades of 4millimeter thick extruded aluminium horizontal externally in approved colour and with ample rigidity within extruded shape and with concealed stiffener, supports in approved spacing with an assumed efficiency of 50% in required sizes with aluminium frames sections of Jindal or approved equivalent with 25micron anodised (as per IS 1868/1982) of approved shade, including, all aluminium brackets, aluminium frames and sub-frames, approved fixing arrangement to main structure, etc. complete as per approved shop drawings specifications as directed by engineer-in-charge.
-
-
-
From Third (P04) Floor up to Forth (L01) Floor
71.5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
71.5
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
71.5
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
71.5
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
71.5
-
-
From Eighth (L05) Floor up to Terrace Floor
71.5
-
-
Design, fabricate, supply,installation,protection,cleaning and handover of all façade systems and interfaces of Terracotta tiles in dry cladding in approved size and in pattern externally to masonry / concrete surfaces wherever called for with machine cut staright edges, including properitory suport system, SS cramps of 316 grade, of approved design with matching recesses in slab, dowels, pins, provision for drainage and ventilation of cavity, providing cutouts if required, Grouting the holes drilled with non-shrink grout with matching pigment, at all heights, levels, including necessary staging, scaffolding, cleaning etc. all complete as per approved shop drawings specifications as directed by the Engineer-in-charge.
Item includes bird/vermin proof closer at bottom, bottom, sides with cement board of approved make, quality, of matching shade of Terracotta tiles/anodised aluminium flashings bent to profile, made of single piece and fixed in slope. The corner pieces of the cladding system shall be made in single piece bent to profile.
(Structural steel shall be paid seperately under relevent item)
-
-
-
From Third (P04) Floor up to Forth (L01) Floor
229.83
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
229.83
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
229.83
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
229.83
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
229.83
-
-
From Eighth (L05) Floor up to Terrace Floor
229.83
-
-
Providing, fabricating & fixing of roofing / skylight system using laminated glass units comprised of high performance 6millimeter toughened clear glass of grey shade (manufactured by Saint Gobain or approved equivalent) and 6millimeter thoughened c1ear glass bonded by 1.52millimeter thick PVB layer in between them as per detailed architectural drawing including painting as required complete as detailed hereunder:
Supporting structure for roofing / skylight system shall be of medium class MS pipe conforming to IS: 1161, Pipe junctions shall be welded joints as required with good quality of electrodes and finished smooth by grinding including zinc chromate primer & two coats of approved synthetic enamel paint.The supporting structure shall be anchored with base plate / angles with RCC structure using foundation plates and bolts or alternatively the members can be embedded in the concrete wherever possible .The roofing / skylight sheet shall be as specified having minimum size of 2000millimeter x 2000millimeter or as shown in detailed drawing, length can be made to order to minimise wastage.Glass fixing shall be done with extruded Aluminium Semi-Unitised mullion framing aluminium profiles as per detail sectional drawing. The clamping profiles shall consists of base section and a compatible top section. All aluminium sections shall be powder coated as per detail schedule of finishes, providing microwave Curd Gasket, double Sided adhesive tape, structural silicon, aluminium rectangular sleeve of requireds size and GI Sheet to cover the flashing on peripheral.system is designed to take care of the wind pressure and water drainage system.The clamping shall have provision for EPDM rubber gasketing for water sealing, however weather silicone sealant shall be used for sealing intersection joints if any and other vulnerable joints as and where required etc. all complete as per approved shop drawings specifications as directed by the Engineer-in-charge. (Structural Steel shall be paid seperately under relevent item)
-
-
-
Terrace Floor (As the part of Eighth floor)
30
-
-
Design, supplying and installing aluminium cladding systems in straight, curved and profiled sections comprising of PVDF coated 4millimeter thick approved aluminium composite panels in approved colour, including approved 35 micron PVDF coating shade for extruded aluminium sub-structure frame work, aluminium brackets, gaskets, approved fixing arrangement to main structure etc complete.
Item includes bird/vermin proof closer at bottom and anodised aluminium flashings bent to profile, made of single piece and fixed in slope. The corner pieces of the cladding system shall be made in single piece bent to profile. The aluminum cladding system etc. all complete as per approved shop drawings specifications as directed by the Engineer-in-charge. (Structural Steel shall be paid seperately under relevent item)
-
-
-
Terrace Floor (As the part of Eighth floor)
1019
-
-
FALSE CEILING WORKS
-
-
-
General Notes:
1) The item to include all suspension systems, provision for adequate supports for lighting fittings, making cut-outs and extra framework for light fixtures, A.C. grills, speakers, sprinklers, sensors, all detectors, cameras light fittings, etc., complete all as per lay-out / pattern as shown in drawing, as per manufacture's recommendations, as per approved shop drawing, and as directed by the Engineer-in-charge.
2) Measurements shall be wall to wall without any deductions for Lights, diffusers, columns etc.
-
-
-
Providing and fixing at all heights 12.5millimeter tapered edge Gypsum board (manufactured by Saint Gobain or approved equivalent) conforming to IS: 2095- 1996 : Part-I suspended ceiling system comprised of G.I. perimeter channels 0.55millimeter thick having one flange of 20millimeter and another flange of 30millimeter and a web of 27millimeter along the perimeter of ceiling fixed with screws at 610millimeter centers using nylon sleeves.
G.I. intermediate channels 0.9millimeter thick with two flanges of 15millimeter each and web 45millimeter are suspended from the soffit to the required level, at 1220millimeter centers with ceiling angle of 25x10x0.55millimeter thick fixed to the soffit with G.I cleat and steel expansion fasteners.
Ceiling section of 0.55millimeter thickness having knurled web of 51.5millimeter and two flanges of 26millimeter each with lips of 10.5millimeter are then fixed to the intermediate channel with the help of connecting clip, perpendicular to the intermediate channel at 450millimeter centers gypsum board fixed mechanically to ceiling section with 25millimeter dry wall screws at 230millimeter centers, including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finisher and two coats of primer suitable for gypsum board as per manufacturer's specifications all complete as per drawings and specifications and as directed by the engineer in charge but excluding the cost of painting (C1)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
49
-
-
From Ground (P01) up to First (P02) Floor
231
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
994
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1069
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1051
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1051
-
-
From Eighth (L05) Floor up to Terrace Floor
1150
-
-
Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System with Classic Max (Board) EDGE TILES WITH ARMSTRONG 32millimeter Superafine Exposed GRID.
The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance ≥84%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 1200 x 17millimeter suitable for Green Building application, with Recycled content of 65%
The tile shall be laid on Armstrong Superafine 38 with 24 millimeter wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner & 1200 millimeter Cross Tees with a web height of 38millimeter and a load carrying capacity of 13.98Kgs/M2. The T Sections have a Galvanizing of 90 grams per M2 The Tile & Grid system used together should carry a 30 year warranty.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
422
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
709
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
704
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
701
-
-
From Eighth (L05) Floor up to Terrace Floor
347
-
-
Providing & Fixing of Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15millimeter Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15millimeter , suitable for Green Building application, with Recycled content of 66% GW & 74% RW. The tile shall be laid on Armstrong Suprafine 38 with 15 millimeter wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 millimeter & 600 millimeter Cross Tees with a web height of 38millimeter and a load carrying capacity of 14 Kgs/M2 with a minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make or approved equivalent. The Tile & Grid system used together should carry a 10 year warranty.products approved as per GRIHA and BS 476 etc. complete.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
280
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
18
-
-
Providing & fixing 300millimeter wide metal plank false ceiling system (manufactured by Armstrong or approved equivalent) of `Clip-in galvanised iron, Bevel Edged Tile Ceiling System, manufactured out of 0.5 millimeter MS Galvanised. The tile/ strip ends will be raised with pips and stops to ensure positive engagement into the spring to enable de-mounting of individual panels.All tiles will be bevelled edged, and all tiles/strips shall be 35 micron pure polyester powder coated to approved shade. Tiles/strips shall be clipped into clip in profile of 0.5 millimeter thick G.I. The clip in profile shall be supported from slab by means of rigid suspension of 4 millimeter GI rod, hold-on clamp with clip.
-
-
-
From Ground (P01) up to First (P02) Floor
4
-
-
From First (P02) Floor up to Second (P03) Floor
4
-
-
From Second (P03) Floor up to Third (P04) Floor
3
-
-
From Third (P04) Floor up to Forth (L01) Floor
3
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
235
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
230
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
232
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
238
-
-
From Eighth (L05) Floor up to Terrace Floor
261
-
-
Providing & Fixing of GI Lay in Plain metal ceiling of Armstrong or approved equivalent make consisting of 600x600millimeter Lay in tiles with minimum 35 micron thick polyester powder coated finish, pre coated galvanized steel in 0.5 millimeter thickness in Global white color tile to be laid on Armstrong or equivalent approve make grid systems with 15millimeter wide T - section flanges color white having rotary stitching on the Main Runner, 1200 millimeter & 600 millimeter Cross Tees.
The tiles would have Fire Performance of Class A2-s1.d0 as per EN13501 standard in module size of 600 X 600 millimeter suitable for Green Building application, with Recycled content of 25%. The grid should be of “Armstrong” or equivalent approved make with 15millimeter wide T - section flanges color white having rotary stitching on all T sections i.e. the Main Runner with C3 coupling, 1200 millimeter & 600 millimeter Cross Tees with Hardened XL2 Clip having a web height of 38 millimeter and a load carrying capacity of 14 Kgs/M. The T Sections have a Galvanizing of 90 grams per M2 with pull out strength of 100 Kgs. Suspension system for grid shall be of Armstrong make or approved equivalent make.
The Tile & Grid system used together should carry a 10 year warrantee.
The work including cutting, fabricating, hoisting, erecting, fixing in position, screws,making riveted/bolted/ welded connections and painting , supports,all accessories complete as per the designs and details and instructions of the Engineer-in-Charge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
77
-
-
From Eighth (L05) Floor up to Terrace Floor
37
-
-
Providing & Fixing of composite fibre cement wooden texture planks false ceiling of 150millimeter wide manufactured by Shera or equivalent approve make fimished with Water based exterior grade paint ( one primer coat and two base coats) including one top coat of lacquer in matt finish of approved color, shade fixed on structural frame work including cutting, fabricating, hoisting, erecting, fixing in position, screws,making riveted/bolted/ welded connections and painting , supports,all accessories complete as per the designs and details and instructions of the Engineer-in-Charge.
(Rate shall exclude for Structural Steel work and shall be paid extra against relevant item)
-
-
-
From First (P02) Floor up to Second (P03) Floor
864
-
-
Providing and fixing Acoustical false ceiling made of pinewood E1 grade fiberboard, melamine/veneer laminated finish, groove perforated slats 2millimeter grooves @ 8millimeter centers/2millimeter Slats @16millimeter pitch /2millimeter grooves @ 32millimeter centers / 2millimeter grooves @ 64millimeter centers / 2millimeter grooves @128millimeter centers, backlined with Soundtex black acoustical fleece, tongue-groove edge for a seamless look, 5-test fire retardant grade/ Non FR, size 128x2440x16millimeter, volume density of base board 800Kg/m3, weight 8Kgs/m2, 10.5Kgs/m2, 11Kgs/m2 installed by using Strut framework system of Anutone or approved equivalent make.
Strut ceiling framework system includes aluminium Strut of wall channel, fully knurled, having sectional thickness 0.55millimeter, length 3600millimeter,unequal flanges of 20 & 30millimeter and web of 25millimeter, fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every300millimeter centers. Main channels, fully knurled, of sectional thickness 0.8millimeter, length 3600millimeter, equal flanges of 15millimeter and web 45millimeter from the soffit at 1200millimeter centers with the Strut, fully knurled, Suspender angle with sectional thickness 0.55millimeter unequal flanges of 25 & 10millimeter.
Aluminium Strut cross channel, fully knurled, sectional thickness 0.55millimeter, length 3600millimeter, web 35millimeter, depth of 20millimeter and equal flanges 15millimeter is fastened to the another Strut, sectional thickness 0.8millimeter, length 3600millimeter, perpendicularly at 600millimeter centers. Aluminium Strut core cross channel, of thickness 0.5millimeter, length 2400millimeter, web 15millimeter & 27millimeter, depth 18millimeter and flanges of 7millimeter with suitable edge ¢re brackets is then fixed perpendicular to the Strut CC25 Cross channel with the help of fasteners at every 400millimeter centers.
Acoustical false ceiling Panel is then fixed perpendicular to aluminium Strut of core cross channel, thickness 0.5millimeter, length 2400millimeter, web 15millimeter & 27millimeter, depth 18millimeter and flanges of 7millimeter, with suitable edge & centre brackets. Contractor to provide expansion joints of 3millimeter at every 4.88m length wise and 4.992m width wise.
The system is backlined with polyfibre core material of suitable thickness as per manufacure's specifications.
The System Shall comply the following parameters.
• Fire (Class) – 1 & P (For FR grade) • Acoustics – NRC 0.77(E300* Mounting)
• Thermal conductivity (W/mk)– na • Climate (°C, RH) – 50, 70
• Light reflectance (%) – 75 (Maple Arce) • Green (VOC, RC %) – Low, 25
Acoustical False Ceiling system of Anutone Slats Surco 128 x2440 x16millimeter , T&G edge, manufactured by Anutone or approved equivalent make. The work including cutting, fabricating, hoisting, erecting, fixing in position, screws,making riveted/bolted/ welded connections and painting , supports,all accessories complete as per the designs and details and instructions of the Engineer-in-Charge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
17
-
-
From Eighth (L05) Floor up to Terrace Floor
17
-
-
Providing and fixing Acoustical false ceiling made of pinewood E1 grade fiberboard, with slotted perforations, melamine/veneer laminated finish, 5-test fire retardant grade/ Non FR, size 600x600x16millimeter, Conceil A Edge, volume density of base board 800Kg/m3, weight 9.3Kgs/m2, 10.4Kgs/m2, 10.3Kgs/m2 installed by using suspended Strut framework concealed system of Anutone or approved equivalent make.suspended Strut framework concealed system of 600 x 1200 module includes wall angle with equal flanges of 24millimeter, length 3000millimeter, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300millimeter centers.Then suspend the MainT with flange width 24millimeter, height 38millimeter and length 3600millimeter, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 600millimeter centres. Spacer bar with pre notched slots (wall angle) at 600millimeter centers in staggered pattern are placed above MainT to hold system in position. Acoustical False ceiling Panel is then slided over the mainT.The system is backlined with polyfibre core material of suitable thickness as per manufacure's specifications.
The System Shall comply the following parameters.
• Fire (Class) – 1 & P (For FR grade)
• Acoustics – NRC upto 0.85
• Thermal conductivity (W/mk)– na
• Climate (°C, RH) – 40, 70
• Light reflectance (%) – Colour Dependant
• Green (VOC, RC %) – Low, 25
Acoustical False Ceiling system of Anutone Slit Ranurado 600x1200x16millimeter, T&G edge, manufactured by Anutone or approved equivalent make.The work including cutting, fabricating, hoisting, erecting, fixing in position, screws,making riveted/bolted/ welded connections and painting , supports,all accessories complete as per the designs and details and instructions of the Engineer-in-Charge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
17
-
-
From Eighth (L05) Floor up to Terrace Floor
17
-
-
WALL PARTITIONS & PANELING WORKS
-
-
-
Providing & fixing metal stud Gypsum Board partition wall in required thick & consisting of :
(i) 0.5millimeter thick floor & ceiling channels (in 'C' shape) of size 35 x 72 approx.(ii) 0.5millimeter thick G.I. Studs (in 'C' channel shape) of size 32 x70millimeter, fixed vertically at 600 centres to floor & ceiling channels.(iii) Gypsum Board of specified thickness with tapered edges fixed on both sides of the G.I. Studs and channels with 25millimeter drywall screws at 300 millimeter centre (approx.) (iv) The Boards are to be jointed and finished to have a flush look by filling and flushing jointing compound, fixing jointing paper tape and two coats of suitable drywall applying tap coat 98 millimeter thick gypsum board metal stud partition with single layer 13millimeter thick impact resistant gypsum board ("Duraline" conforming to BS 5234 –1992, Part 2) manufactured by saint-gobain or approved equivalent make on either side of 70millimeter metal stud frame work. including 25millimeter thick glass wool slab of density 32Kg/m3 shall be provided in the cavity. The junction of the partition with masonry & all penetration through the partition has to be treated with acoustic sealant. The work including cutting, fabricating, hoisting, erecting, fixing in position, screws,making riveted/bolted/ welded connections and painting , supports,all accessories etc. complete as per the designs and details and instructions of the Engineer-in-Charge.
Measurement shall be made on the basis of finished area for the purpose of payment
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
7.9
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
29.8
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
25.2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
53.3
-
-
From Eighth (L05) Floor up to Terrace Floor
28
-
-
Providing & fixing metal stud Gypsum Board partition wall in required thick & consisting of :
(i) 0.5millimeter thick floor & ceiling channels (in 'C' shape) of size 35 x 72 approx.
(ii) 0.5millimeter thick G.I. Studs (in 'C' channel shape) of size 32 x70millimeter, fixed vertically at 600 centres to floor & ceiling channels.
(iii) Gypsum Board of specified thickness with tapered edges fixed on both sides of the G.I. Studs and channels with 25millimeter and 50millimeter drywall screws at 300 millimeter centre (approx.)
(iv) The Boards are to be jointed and finished to have a flush look by filling and flushing jointing compound, fixing jointing paper tape and two coats of suitable drywall applying tap coat etc. complete as per the designs and details and instructions of the Engineer-in-Charge.
Measurement shall be made on the basis of finished area for the purpose of payment 123 millimeter thick gypsum board metal stud partition with double layer consisting of inner layer of 12.5millimeter thick gypsum board and outer layer of 13millimeter thick impact resistant gypsum board ("Duraline" conforming to BS 5234 –1992, Part 2) manufactured by saint-gobain or approved equivalent make on either side of 70millimeter metal stud frame work. including 50millimeter thick glass wool slab of density 32Kg/m3 shall be provided in the cavity. The junction of the partition with masonry & all penetration through the partition has to be treated with acoustic sealant.
The work including cutting, fabricating, hoisting, erecting, fixing in position, screws,making riveted/bolted/ welded connections and painting , supports,all accessories etc. complete as per the designs and details and instructions of the Engineer-in-Charge.
Measurement shall be made on the basis of finished area for the purpose of payment
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
71.1
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
268.2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
226.8
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
479.7
-
-
From Eighth (L05) Floor up to Terrace Floor
252
-
-
For 2 hours fire rated glazed Partition system with 14 millimeter thick EW category fire rated glass with 2 hours fire rated framing system
Providing and fixing of tested 120 minutes fire rated - integrity and radiation control and partial insulation (EW120) - fully glazed non-load bearing fixed partition system. The glass should be Contraflam Lite, 14 millimeter clear 120 min fire rated and partially insulated (EW120), Non Wired Toughened Interlayered glass having a sound reduction of 38dB, LT of 85% and compliant to class 1(B)1 category of Impact Resistance as per EN 12600. The glass should be manufactured in UL & TUV audited Facility and including UL-EU Certification.
The glass is tested as per EN 1364-1 in Efectis, Netherland or any other reputed laboratory.The profiles are manufactured from 1.6 millimeter galvanized steel sheet pressed formed to a profile of the dimension of 60 x 70 (overall dimension in millimeter) as per test evidence. The profile has to be fixed to the supporting construction by means of M10 or bigger steel bolts at every 150 millimeter from the edges and every 500 millimeter (approx.) c/c.The glass should be held in its place with the help of minimum 1.6 millimeter GI beading which can be clamped or bolted to the profile by 4 millimeter x 35 millimeter steel screws at every 250 meter c/c and a ceramic tape of the cross section of 5 millimeter x 20 millimeter as per the test evidence. The glass should be installed using a ceramic tape. The glass panes are to be supported on non-combustible 5 millimeter Calcium Silicate setting blocks. The maximum glazing size cannot be more than 1250 millimeter x 2840 millimeter (w x h) or 3.55 Square meter in total area or can vary as per the test certification.The work including cutting, fabricating, hoisting, erecting, fixing in position, screws,making riveted/bolted/ welded connections and painting , supports,all accessories etc. complete as per the designs and details and instructions of the Engineer-in-Charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
40
-
-
From Ground (P01) up to First (P02) Floor
50
-
-
From First (P02) Floor up to Second (P03) Floor
41
-
-
From Second (P03) Floor up to Third (P04) Floor
41
-
-
From Third (P04) Floor up to Forth (L01) Floor
41
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
96
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
38
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
71
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
54
-
-
From Eighth (L05) Floor up to Terrace Floor
41
-
-
For 2 hours fire rated glazed Door system with 14 millimeter thick EW category fire rated glass with 2 hours fire rated framing system :
Providing and fixing of tested fully glazed steel fire rated double leaf door with 120 minutes of integrity and radiation control (partial insulation) (EW=120) fabricated with 1.6 millimeter thick galvanized steel sheet. The door frames are manufactured from 1.6 millimeter galvanized steel sheet pressed to form a profile of 50 millimeter x 60 millimeter on the top and 35 millimeter x 60 millimeter on the vertical sides. The door shutters would have bottom rail of 110millimeter x 60millimeter and 60 millimeter x 60 millimeter on the rest sides with an additional rebate of 20 millimeter to hold the glass. The overall door opening is 2600 millimeter x 2600 millimeter (w x h). The glass is tested as per EN 1634-1 standard in Efectis, Netherland or any other reputed laboratory.
The glass should be Contraflam Lite, 14millimeter clear 120 min fire rated (EW 120), Non-Wired Toughened Interlayered glass with a light transmission of 85% and a sound reduction of 38 dB and manufactured in UL & TUV audited Facility and including UL-EU Certification. The glass should be compliant to class 1(B)1 category of Impact Resistance as per EN 12600. The glass should be held in its place with the help of minimum 1.6 millimeter GI beading and a special ceramic tape with cross section of 5 x 20 millimeter as per the test evidence. The maximum glazing size should be not more than 1250 millimeter x 2840 millimeter (w x h) or 3.55 Square. meter in total area. The shutters should be fixed to the frame using Dorma SS Ball Bearing Hinges of size 100 millimeter x 89 millimeter and 3 millimeter thickness or equivalent. Beading should be attached using 4 millimeter x 35 millimeter SS screws at a distance of 250 millimeter c/c (approx) henceforth. The door should be fitted with Dorma Mortise Sash lock 952F and door closer TS 68 of Dorma make or equivalent. The inactive leaf should be fixed to the frame using 1200millimeter long Dorma tower bolt no 9114306 or equivalent.
The work including cutting, fabricating, hoisting, erecting, fixing in position, screws,making riveted/bolted/ welded connections and painting , supports,all accessories etc. complete as per the designs and details and instructions of the Engineer-in-Charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
6.6
-
-
From Ground (P01) up to First (P02) Floor
6.6
-
-
From First (P02) Floor up to Second (P03) Floor
6.6
-
-
From Second (P03) Floor up to Third (P04) Floor
6.6
-
-
From Third (P04) Floor up to Forth (L01) Floor
6.6
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
14.07
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
8.44
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
8.44
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
8.44
-
-
From Eighth (L05) Floor up to Terrace Floor
11.25
-
-
Providing and fixing Acoustical Wall Panelling made of pinewood E1 grade fiberboard, melamine/veneer laminated finish, groove perforated slats 2millimeter grooves @ 8millimeter centers/2millimeter Slats @16millimeter pitch /2millimeter grooves @ 32millimeter centers / 2millimeter grooves @ 64millimeter centers / 2millimeter grooves @128millimeter centers, backlined with Soundtex black acoustical fleece, tongue-groove edge for a seamless look, 5-test fire retardant grade/ Non FR, size 128x2440x16millimeter, volume density of base board 800Kg/m3, weight 8Kgs/m2, 10.5Kgs/m2, 11Kgs/m2 installed by using Strut framework system of Anutone or approved equivalent make.Strut framework system includes aluminium Strut of core cross channel having thickness 0.55millimeter, length 3600millimeter, knurled web 40millimeter, depth 10millimeter and equal flanges 15millimeter is fastened to wall or framework behind vertically/horizontally at every 600millimeter c/c, Another aluminium Strut of core cross channel, thickness 0.5millimeter, length 2400millimeter, web 15millimeter & 27millimeter, depth 18millimeter and flanges of 7millimeter with suitable edge & centre brackets is then fixed perpendicular to the Strut Cross channel having thickness 0.55millimeter with the help of fasteners at every 400millimeter centers. Acoustical Wall Panel is then fixed perpendicular to aluminium Strut of core cross channel, thickness 0.5millimeter with suitable edge & centre brackets. Short edges of the panel are staggered.Panels are backlined with polyfibrous material sheets 10x25 held in position with dab spots of approved rubber based adhesive. Contractor to provide expansion joints of 3millimeter at every 4.88m length wise and 4.992m width wise.
The System Shall comply the following parameters,
Fire (Class) – 1 & P (For FR grade)
• Acoustics – NRC 0.77 (For E300* Mounting)
• Thermal conductivity (W/mk)– na
• Climate (°C, RH) – 50, 70
• Light reflectance (%) – 75 (Maple Arce)
• Green (VOC, RC %) – Low, 25
25 millimeter thick Acoustical Wall Panelling system of Anutone Slats Surco 128 x2440 x16millimeter , T&G edge, manufactured by Anutone or approved equivalent make.
The work including cutting, fabricating, hoisting, erecting, fixing in position, screws,making riveted/bolted/ welded connections and painting , supports,all accessories etc complete as per the designs and details and instructions of the Engineer-in-Charge.
Measurement shall be made on the basis of finished area for the purpose of payment
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
56.5
-
-
From Eighth (L05) Floor up to Terrace Floor
71
-
-
Acoustical Wall Panelling made of pinewood E1 grade fiberboard, with slotted perforations, melamine/veneer laminated finish, 5-test fire retardant grade/ Non FR, size 600x600x16millimeter, tongue and groove edge, volume density of base board 800Kg/m3, weight 9.3Kgs/m2, 10.4Kgs/m2, 10.3Kgs/m2 installed by using Strut framework system of Anutone or approved equivalent make.Strut framework system includes aluminium Strut of core cross channel having thickness 0.55millimeter, length 3600millimeter, knurled web 40millimeter, depth 10millimeter and equal flanges 15 millimeter is fastened to wall or framework behind vertically/horizontally at every 600millimeter c/c, Another aluminium Strut of core cross channel, thickness 0.5millimeter, length 2400millimeter, web 15millimeter & 27millimeter, depth 18millimeter and flanges of 7millimeter with suitable edge & centre brackets is then fixed perpendicular to the Strut Cross channel having thickness 0.55millimeter with the help of fasteners at every 400millimeter centers. Acoustical Wall Panel is then fixed perpendicular to aluminium Strut of core cross channel, thickness 0.5millimeter with suitable edge & centre brackets. Short edges of the panel are staggered. Panels are backlined with polyfibrous material sheets 10x25 held in position with dab spots of approved rubber based adhesive.Contractor to provide expansion joints of 3millimeter at every 4.88m length wise and 4.992m width wise.
The System Shall comply the following parameters,
Fire (Class) – 1 & P (For FR grade)
• Acoustics – NRC 0.77 (For E300* Mounting)
• Thermal conductivity (W/mk)– na
• Climate (°C, RH) – 50, 70
• Light reflectance (%) – 75 (Maple Arce)
• Green (VOC, RC %) – Low, 25
25 millimeter thick Acoustical Wall Panelling system of Anutone Slit Ranurado 600x600x16millimeter, T&G edge, manufactured by Anutone or approved equivalent make.
The work including cutting, fabricating, hoisting, erecting, fixing in position, screws,making riveted/bolted/ welded connections and painting , supports,all accessories etc complete as per the designs and details and instructions of the Engineer-in-Charge.
Measurement shall be made on the basis of finished area for the purpose of payment
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
56.5
-
-
From Eighth (L05) Floor up to Terrace Floor
71
-
-
Providing and installing in position fully glazed aluminium partition with 6millimeter thick clear toughened glass fixed glazing using 25 micron anodised in Light Champagne shade extruded aluminium sections (conforming to IS: 733) frame work in heavy series of approved make & shade fixed on all sides, including glass, EPDM gaskets, aluminium beading, flashing, screws etc., complete all as per approved shop drawing as specified as directed by the Engineer-in-Charge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
60
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
277
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
268
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
274
-
-
From Eighth (L05) Floor up to Terrace Floor
254
-
-
Providing and installing in position partly glazed aluminium partition with 6millimeter thick clear toughened glass fixed glazing and and 12millimeter thick both side Pre-laminated MDF board of approved make, shade, using 25 micron anodised in Light Champagne shade extruded aluminium sections (conforming to IS: 733) frame work in heavy series of approved make & shade fixed on all sides, including glass, EPDM gaskets, aluminium beading, flashing, screws etc., complete all as per approved shop drawing as specified as directed by the Engineer-in-Charge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
174
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
190
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
183
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
183
-
-
From Eighth (L05) Floor up to Terrace Floor
135
-
-
Supplying, fabricating and installing in position frameless fixed glazing using 10millimeter toughened glass of approved make, quality of required size including SS patch fitting of approved make, quality to hold the glass on all sides, structural silicone sealant etc; complete all as per approved shop drawing as specified and as directed by the Engineer-in-charge.All joints between the glass panels/glass & masonry shall be sealed by colourless structural silicon sealant.
-
-
-
From Ground (P01) up to First (P02) Floor
68
-
-
Supplying and installing openable fully glazed doors with patch fittings; as specified below, using 10millimeter thick clear toughened glass including SS patch fitting and bottom patch lock/Central lock of approved quality/make floor spring with pivot, 450millimeter/200millimeter long 25millimeter dia SS satin finished handles back to back, PUSH-PULL labels etc complete, as per approved shop drawing and specifications as approved by Engineer-in-charge. All accessories and hardware shall be of SS 316 grade/ approved imported.
(Rate shall include labour for fixing all builders hardwares & fittings. All builders hardwares shall be paid seperately)
-
-
-
From Ground (P01) up to First (P02) Floor
26.4
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
32.3
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
63.6
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
62.3
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
73.7
-
-
From Eighth (L05) Floor up to Terrace Floor
3.5
-
-
Providing and fixing self adhesive polyester glass film (manufactured by Garware Polyetser Limited or approved equivalent) milky white colour to the glass in pattern as per drawing as spcified as directed by Engineer-in-Charge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
15
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
69.3
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
67
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
68.5
-
-
From Eighth (L05) Floor up to Terrace Floor
63.5
-
-
RAILING WORKS
-
-
-
Providing and Fixing matt finish stainless steel (of 302 grade ) railing with top pipe of 50 millimeter dia. and vertical pipe of 38 millimeter dia at 0.60 meter c/c or as required and horizontal pipes of 25 millimeter dia in three rows, all pipes of 2 millimeter thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 millimeter dia above newel post of 75 millimeter diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
21
-
-
From Ground (P01) up to First (P02) Floor
21
-
-
From First (P02) Floor up to Second (P03) Floor
21
-
-
From Second (P03) Floor up to Third (P04) Floor
21
-
-
From Third (P04) Floor up to Forth (L01) Floor
21
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
21
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
21
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
21
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
21
-
-
From Eighth (L05) Floor up to Terrace Floor
21
-
-
Providing and fixing 40millimeter diameter and 1.5millimeter thick Stainless steel hand railing in S.S.304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
21
-
-
From Ground (P01) up to First (P02) Floor
21
-
-
From First (P02) Floor up to Second (P03) Floor
21
-
-
From Second (P03) Floor up to Third (P04) Floor
21
-
-
From Third (P04) Floor up to Forth (L01) Floor
21
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
152
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
152
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
152
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
152
-
-
From Eighth (L05) Floor up to Terrace Floor
152
-
-
STORAGE COMPACTOR
-
-
-
Designing, Manufacturing, Providing, Installing, Commissioning of compact storage MOBISTACK NEO SYSTEM manufactured by GODREJ or equivalent having designed as per SEMA standards, MOC: Virgin steel with mill certification, Boltless design, with anti tilting & Anti toppling safety mechanism, Self lubricating bearing, Provision of Digital electronic locking system, powder coated with approved color shade fixed at all heights, levels, and locations etc. complete serving the maximum storage capacity and maximum space saving etc. complete as per approved shop drawings, design as per manufacturer's specifications as directed by the Engineer-in-charge.
Total Length of System - 5404 millimeter
Total width of System - 2874 millimeter
Body Height - 3111 millimeter
No of bay/Length- 2Bays of 1300 millimeter
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
1
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1
-
-
From Eighth (L05) Floor up to Terrace Floor
1
-
-
ROAD WORKS
-
-
-
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.
990
-
-
Excavation for roadway in hard murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed.
495
-
-
Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed.
495
-
-
Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.
248
-
-
Excavation for catch / side water gutter in Hard murum strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed.
99
-
-
Excavation for catch / side water gutter in Soft rock strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed.
99
-
-
Excavation for catch / side water gutters in Hard rock strata to the specified section including stacking the excavated stuff in a regular bund by chiselling and wedging and disposing of unsuitable or excess stuff as directed.
50
-
-
Construction of sub-grade 500 millimeter thick and earthen shoulders satisfying the needs minimum soaked CBR value-10% with approved materials including preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth / rock to an average of 250 millimeter. depth, dressing to camber consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus excavated materials within the site boundary, including all leads, lifts etc. complete all as per Technical specifications and as directed by the Engineer-in-charge.
825
-
-
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material
330
-
-
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 millimeter, , cement content not to be less than 150 Kilogram/ cubic meter, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete.
248
-
-
Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement)over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying compacting and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 millimeter at bottom and 40 millimeter at top with depth of 75millimeter and maintaining the same throughout curing period by any other method approved by Engineer-in-charge.
495
-
-
Cutting transverse contraction joints 3 to 4 millimeter wide and depth 60millimeter. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 millimeter. wide at top having depth of 15 millimeter. as directed by Engineer incharge.
642
-
-
Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 millimeter.to 4 millimeter. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 millimeter. deep x 8 millimeter.wide)
642
-
-
Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 100MM thick in M-40 grade of approved size and shape for City streets and roads with high volume/ heavy traffice as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 millimeter thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.
350
-
-
Painting Line, Dashes, Arrows etc on Roads in two coats on new work with ready mixed road marking paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (Upto 10centimeter wide) (MORTH-803) -- New Surface
68.8
-
-
Providing and casting in situ or precast tapering R.C.C. M-20 Mountable type Kerb without gutter ( as per IRC 86 1983) embedded 125millimeter below ground level over M-10 PCC finished neatly with Cement mortar 1:2, setting the same in Cement mortar 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant
275
-
-
Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125millimeter below ground level over M-10 PCC finished neatly with Cement mortar 1:2, setting the same in Cement mortar 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant
275
-
-
Providing and constructing Information Pillar of Brick Masonry in Cement mortar 1:6 of size 2.0 meter x 0.23m x 1.0 meter with base pedestal of size 2.3 meter x 0.35 meter x 0.45 meter (0.3 meter above ground), excavtion in ground upto 0.4 meter, laying 0.15 meter thick 80 millimeter soling,0.10 meter thick c.c. 1:3:6, finishing the pedestal and pillar in cement plaster 12 millimeter thick in Cement mortar 1:5 and finishing the pillar with neat cement finish ,applying flat oil paint of approved colour in two coats, including curing, finishing etc complete.(In Strata other than B.C. Soil) Spec. No. :As directed by Engineer-in-charge.
1
-
-
Painting Line, Dashes, Arrows etc on Roads in two coats on new work with ready mixed road marking paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (Upto 10centimeter wide) (MORTH-803) -- New Surface
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
84.7
-
-
From Ground (P01) up to First (P02) Floor
80.1
-
-
From First (P02) Floor up to Second (P03) Floor
54.1
-
-
From Second (P03) Floor up to Third (P04) Floor
53.2
-
-
From Third (P04) Floor up to Forth (L01) Floor
53.2
-
-
DISMANTALING AND DEMOLISHING WORKS
-
-
-
Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.
42
-
-
Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc.
118
-
-
Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.
12
-
-
Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.
5
-
-
Removing cement or lime plaster including disposing of the spoils as directed with all leads, lifts etc, complete.
5
-
-
Removing wire fencing with iron/ C.C. fencing post and stacking the materials as directed with all leads, lifts etc. complete.
115
-
-
Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.
5
-
-
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer in-charge.
5
-
-
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:
-
-
-
R.S. Joists
500
-
-
Channels, angles, tees and flats
500
-
-
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.
647
-
-
Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
210
-
-
Water bound macadam road
-
-
-
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 meter initial lead, for all leads including all lifts involved.
10
-
-
HORTICULTURE WORKS
-
-
-
Preparing Instant Lawn:
-
-
-
Excavating the ground to a required depth of 20 cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in 2:1 proportion to a height of 20 Centimeter Mixing soil and manure thoroughly well, levelling with required slope, light watering on previous night, rolling on surface, Fixing readymade lawn turf rolls or slabs of required variety as diretced. Ramming on it for proper fixing & maintaining till well established by watering, weeding, clipping or mowing etc. complete.
100
-
-
Planting Clipped Hedge:
-
-
-
Excavating the ground to a required depth of 30 Centimeter Removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure in excavated area in 3:1 proportion to a height of 30 Centimeter Mixing garden soil and manure thoroughly, well levelling, watering on previous night. Planting Hedge plants of required species in two rows. Distance between two rows & between two plants will be 25 Centimeter Maintaining till well established by watering, weeding, stirring the soil and clipping if necessary etc. complete.
20
-
-
Preparing Flower Bed:
-
-
-
Excavating the ground to a required depth of 30 Centimeter Removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure in excavated area in 3:1 proportion to a height of 30 Centimeter Mixing garden soil and manure thoroughly, well levelling, watering on previous night. Planting seedlings of required annuals 25 Centimeter apart. Maintaining till well established by watering, weeding, stirring replacing of casualties etc. complete.
50
-
-
Preparing Canna Bed:
-
-
-
Excavating the ground to a required depth of 30 cms, Removing rubbish and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure in excavated area in 2:1 proportion to a height of 30 Centimeter Mixing garden soil and manure thoroughly, well levelling, watering on previous night. Planting well developed Cann rhizomes 40 Centimeter apart. Maintaining till well established by watering, weeding, stirring, replacing casualties etc. complete.
5
-
-
Preparing Shrubbery
-
-
-
Excavating the ground to a required depth of 30 cms, Removing rubbish and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure in excavated area in 3:1 proportion to a height of 30 Centimeter Mixing garden soil and manure thoroughly, well levelling, watering on previous night. Planting well developed Shrubs plants 0.50mtr height, 0.40 mtr. apart as directed and maintaining till well established by watering, weeding, stirring, replacing casualties etc. complete.
50
-
-
Rose Plant
-
-
-
Excavating pit with size 0.3 M x 0.3 M x 0.3 M, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil and manure in 3:1 proportion to a required height of 0.30m. Mixing the soil & manure thoroughly well, levelling watering on previous night. Planting 40 to 50 Centimeter height healthy plant of required rose variety. Maintaining till well established by watering, weeding, stirring, prunning, replacing the casulties etc. complete.
200
-
-
Mogra Plant / Creepers / Climbers
-
-
-
Excavating pit with size 0.3 M x 0.3 M x 0.3 M, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.15 Mtr. and remaining height of 0.15 Mtr. with fresh garden soil and manure in 3:1 proportion. Mixing soil and manure thoroughly well, levelling watering on previous night. Planting one or two year old healthy plant as per specifications. Maintaining till well established by watering, weeding, stirring, prunning, replacing the casulties etc. complete.
200
-
-
Planting large flowering / Shady trees:
(Minimum height to 2 Mtr.)
-
-
-
Digging pit with size 0.9 M x 0.9 M x 0.9 M, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30 Mtr. and remaining height of 0.60 Mtr. with fresh garden soil and manure in 3:1 proportion. Mixing soil & manure thoroughly well, levelling, as directed, watering on previous night. Planting two or three year old minimum 2mtr hight healthy trees sapling as per specifications. Maintaining till well established by watering, weeding, stirring of soil replacing of casulties etc. complete.
-
-
-
Bahava (Cassia Fistula )
15
-
-
Apta (Bauhinia racemosa)
10
-
-
Planting small and medium size ornamental / Flowering plant:
-
-
-
Digging pit with size 0.6 M x 0.6 M x 0.6 M, Removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil & Farm Yard Manure upto a height of 0.60 Mtr. in 3:1 proportion. Mixing soil and manure thoroughly well, levelling, watering on previous night. Planting one or two year old healthy plant saplings as per specifications. Maintaining till well established by watering, stirring of soil and manure, replacing of casulties etc. complete.
-
-
-
Parijatak (Nyctanthes arbortristis )
15
-
-
Kunti (Murraya paniculata)
10
-
-
Lemon (Citrus sp)
10
-
-
Cutting down trees (Trunks & Brnaches) including disposal of wood and leaves.
-
-
-
30-60 Cm
5
-
-
60-90 Cm
5
-
-
90-180 Cm
5
-
-
180 Cm & above
5
-
-
Replantation of trees within radius of 15 Km
-
-
-
0-30 Cm
1
-
-
30-60 Cm
64
-
-
60-90 Cm
40
-
-
90-120 Cm
15
-
-
120 Cm & above
7
-
-
Providing and installing potted natural plants including clay/concrete pots of required size, filling the pots with thoroughly mixed soil & manure in proportion of 3:1, planting the 30 centimeter to 40centimeter heigh plants of reuiqred species. Maintaining till well established by watering, weeding, stirring of soil replacing of casulties etc. complete.
-
-
-
Basic cost of Plants ranging Rs.(20 to 60)
80
-
-
Basic cost of Plants ranging Rs.(61 to 120)
80
-
-
Basic cost of Plants ranging Rs.(121 to 200)
80
-
-
Basic cost of Plants ranging Rs.(201 to 300)
80
-
-
Basic cost of Plants ranging Rs.(301 to 450)
80
-
-
SANITARY FIXTURES AND FITTINGS
-
-
-
Providing , fixing , testing and fixing in position European water closet comprising of :-Wall hung European W.C. Pan in white colour, on approved type of chairs.
CERA OR APPROVED EQUIVALENT MAKE: CRUSE : SNOW WHITE
CAT. NO. S1031134 P Trap
CAT.NO. S1060106 CISTERN
CAT.NO. B1520110 Cruse Soft Close Seat Cover
CAT.NO. B1810115 Twin Flush Fitting
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
9
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
10
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
12
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
14
-
-
From Eighth (L05) Floor up to Terrace Floor
16
-
-
Providing and fixing Jaquar or approved equivalent make series Hand shower (health faucet) with 8millimeter dia 1 Meter long flexible tube having code no - ALD- / 573 GD / 537 GA / 573 GB and wall hook including necessary sockets/ union nut etc.
complete as directed by Engineer in charge.
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
9
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
10
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
12
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
14
-
-
From Eighth (L05) Floor up to Terrace Floor
16
-
-
Providing , fixing & testing of Concealed Flush Tank / flushing cistern 6/3 lpf or 4/2 lpf with dual flush
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
9
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
10
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
12
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
14
-
-
From Eighth (L05) Floor up to Terrace Floor
16
-
-
Providing and fixing jaquar or approved equivalent make series Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195(millimeter) size model no. CNS-WHT-705, with Jaquar or approved equivalent make pillar cock, code no. DRC-37001 / 37001GA / 37001 GB / 37001 GD, C.P.Angular stop cock long thread jaquar or approved equivalent make continental (Cat.No. CON-059) including SS bottal trap of jaquar or approved equivalent make having coad no. ALD-769L and necessary pipe connection up to the outside face of the wall,.having Telephonic Black / Colour Granite of 180 millimeter thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge.
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
20
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
18
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
20
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
22
-
-
From Eighth (L05) Floor up to Terrace Floor
23
-
-
Providing , fixing , testing checking, storing & fixing shower, spout and wall diverter , Shower arm for hot and cold water supply with all inlet and outlet connections complete as per requirements complete, supplied by with fiitings Shower aerator OHS-35497
Diveter model ALD-079
Spout code :CON-273KNUPR
Shower arm SHA-49483 Exposed part of divertor with lever ,tip ton knob and flange
-
-
-
From Eighth (L05) Floor up to Terrace Floor
4
-
-
Providing and fixing Hindware or approved equivalent make Star white Aquafree Waterless Urinal of Cat. No - 60017 with cartride size of 31.5 x 33 x 60 centimeter including other necessary fitting etc. complete
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
4
-
-
From Eighth (L05) Floor up to Terrace Floor
3
-
-
Providing and fixing white glazed Jaquar or approved equivalent make urinal of series URS-WHT-13257 with Pressmatic auto closing valve of Jaquar or approved equivalent make having code PRS-077G, 32 millimeter diameter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall Etc.complete as directed by Engineer in charge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
4
-
-
From Eighth (L05) Floor up to Terrace Floor
3
-
-
Providing and fixing white glazed Jaquar or approved equivalent make urinal of series URS-WHT-13257 with sensotronic concealed type flushing valve for urinal with complite kit having code no. PRS-077 or equivalent with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 millimeter diameter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc complete.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
4
-
-
From Eighth (L05) Floor up to Terrace Floor
3
-
-
Providing, fixing , testing and commissioning of SS sink CERA OR APPROVED EQUIVALENT : Celebraty Juniar
Size : 810 X 455MM (32"X18") DEPTH : 205MM (8") Matt Finish CAT.NO. B4512202
Installation :Top Mounted CERA OR APPROVED EQUIVALENT MAKE: Celebrity including providing & fixing CI/MS brackets (duly painted with 2 coats of paint over a coat of primer) C.P. cast brass bottle trap/P-Trap with extension piece, rubber adopter, wall flange, union, C.P. brass chain rubber plug complete as required
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Providing and fixing Jaquar or approved equivalent make sink cock with regular swinging spout (Wall Mounted Model) with wall flange Having code no. CON- 347KN G / 347KN GA / 347KN GB / 347KN GE / 347KN GD incluidng other necessary fitting, etc complete as directed by Engineer in charge.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Providing and fixing C.P. BIB cock with wall flange of Jaquar or approved equivalent make Code No.FLR- 5047N GE or equivalent including necessary sockets/ union nut etc. complete as directed by Engineer in charge.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
17
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
16
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
16
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
16
-
-
From Eighth (L05) Floor up to Terrace Floor
16
-
-
Providing, fixing , testing and commissioning screw-to-wall type Toilet paper-roll holder, fixed to the wall with CP brass screws, etc. complete JAQUAR OR APPROVED EQUIVALENT CAT.NO.: ACN-1153N
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
9
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
10
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
12
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
14
-
-
From Eighth (L05) Floor up to Terrace Floor
16
-
-
Providing, fixing , testing and commissioning CP brass / stainless steel liquid soap dispenser with CP / SS cap and bracket, fixed to wall with CP brass screw, etc. complete.JAQUAR OR APPROVED EQUIVALENT CAT.NO.: ACN-1135N
Soap Dispenser With Glass bottle
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
7
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
6
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
8
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
6
-
-
From Eighth (L05) Floor up to Terrace Floor
15
-
-
Providing, fixing , testing and commissioning solid state, no touch operating, fully hygienic hand Drier JAQUAR OR APPROVED EQUIVALENT - HAND DRYER- OPTIMA CAT.NO.: HDR-SAP-M99AC SS - SATIN FINISH supplied by owners of approved shade with double blower continuous repeat usage, time delay, summer and winter control, music while drying, volume ON/OFF controls including providing necessary brackets, cable from drier to plug. Plug top key and lock etc. complete as required.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
4
-
-
From Eighth (L05) Floor up to Terrace Floor
3
-
-
Providing and fixing JAQUAR OR APPROVED EQUIVALENT CAT.NO.: ACN-1181N TOWEL RACK 600MM LONG WITH LOWER HANGERS
-
-
-
From Eighth (L05) Floor up to Terrace Floor
4
-
-
Supplying and erecting ultra violet storage type water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water 8 Ltr/min with activated carbon filter and softener operating on 230 V single phase A.C. supply.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
1
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1
-
-
From Eighth (L05) Floor up to Terrace Floor
1
-
-
Providing, fixing , testing and commissioning Heavy plated C.P. waste coupling fitting CERA OR APPROVED EQUIVALENT WASTE COUPLING CAT.NO. : F8050301 HALF THREAD 32MM
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
21
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
18
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
20
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
18
-
-
From Eighth (L05) Floor up to Terrace Floor
21
-
-
Providing, fixing , testing and commissioning 32 millimeter Heavy plated C.P. bottle trap with cleaning eye with extension piece and wall flange Model ALD-769L250x190
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
24
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
19
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
21
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
19
-
-
From Eighth (L05) Floor up to Terrace Floor
24
-
-
Providing, fixing , testing and commissioning CP pillar cock with 15 millimeter C.P. brass heavy grade flexible inlet connection with C.P. nut (minimum length 450 millimeter) made to measure model aerator model CERA OR APPROVED EQUIVALENT : GAYLE SINGLE LEVER CAT.NO. : F1014101 PILLAR COCK WITH AERATOR
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
24
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
19
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
21
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
19
-
-
From Eighth (L05) Floor up to Terrace Floor
24
-
-
Providing, fixing , testing and commissioning 15 millimeter C.P. brass heavy quality angle stop cocks for flushing cistern and jet spray / health faucet ANGULAR STOP COCK WITH WALL FLANGE JAQUAR APPROVED EQUIVALENT: FLORENTINE SERIES, CAT.NO. FLR-5053N
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
27
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
20
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
22
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
20
-
-
From Eighth (L05) Floor up to Terrace Floor
27
-
-
INTERNAL COLD WATER SUPPLY
-
-
-
Providing and fixing on walls/ ceiling/ floor 15 millimeter dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
-
-
-
From Ground (P01) up to First (P02) Floor
26
-
-
From First (P02) Floor up to Second (P03) Floor
26
-
-
From Second (P03) Floor up to Third (P04) Floor
17
-
-
From Third (P04) Floor up to Forth (L01) Floor
19
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
160
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
130
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
152
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
174
-
-
From Eighth (L05) Floor up to Terrace Floor
201
-
-
Providing and fixing on walls/ceiling/floor 20 millimeter dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
21
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
21
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
21
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
21
-
-
From Eighth (L05) Floor up to Terrace Floor
14
-
-
Providing & fixing 15millimeter male/ female screwed end full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated ball & Teflon seat tested to a pressure 15 Kilogram / sqcentimeter with (threaded joints) complete as required.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
8
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
12
-
-
From Eighth (L05) Floor up to Terrace Floor
21
-
-
Providing & fixing 20millimeter male/ female screwed end full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated ball & Teflon seat tested to a pressure 15 Kilogram / sqcentimeter with (threaded joints) complete as required.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
8
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
8
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
8
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
8
-
-
From Eighth (L05) Floor up to Terrace Floor
6
-
-
Providing, checking, storing & fixing ,testing and commissioning of 15 millimeter CP Conceal stop cock as per IS 8931
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
18
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
16
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
16
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
16
-
-
From Eighth (L05) Floor up to Terrace Floor
12
-
-
INTERNAL HOT WATER SUPPLY
-
-
-
Supplying , erecting and testing 12/16 millimeter (ID/OD) polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for Solar Water Heater System as per specification No.(ESD-HWP/PCP)
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
25
-
-
From Eighth (L05) Floor up to Terrace Floor
30
-
-
Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided PCP pipes / copper pipes having 9 millimeter thickness and inner diameter / sizes 12 millimeter for Solar Water Heater System as per specification no ESD-ENR
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
25
-
-
From Eighth (L05) Floor up to Terrace Floor
30
-
-
Providing & fixing 15millimeter male/ female screwed end full way lever operated Forged brass ball valve of brass body with forged brass hard chrome plated ball & Teflon seat tested to a pressure 15 Kilogram / sqcentimeter with (threaded joints) complete as required.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
4
-
-
Supplying and erecting storage/ pressure type vertical / horizontal water heater 50 Litres capacity of mild steelbody on wall / loft as per specification No. APWH/STWH
-
-
-
From Eighth (L05) Floor up to Terrace Floor
4
-
-
Supplying and erecting Chromium plated heavy duty brass stop cock for inlet pipe of water heater (15 millimeter. dia).
-
-
-
From Eighth (L05) Floor up to Terrace Floor
8
-
-
Providing fibre reinforced PVC flexible pipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water complete erected in an approved manner.
-
-
-
From Eighth (L05) Floor up to Terrace Floor
8
-
-
EXTERNAL COLD WATER SUPPLY
-
-
-
Providing and fixing on walls/ ceiling/ floor 20 millimeter dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
-
-
-
From Second (P03) Floor up to Third (P04) Floor
9
-
-
From Third (P04) Floor up to Forth (L01) Floor
9
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
7
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
9
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
23
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
26
-
-
From Eighth (L05) Floor up to Terrace Floor
59
-
-
Terrace Floor (As the part of Eighth floor)
43
-
-
Providing and fixing on walls/ceiling/floor 25 millimeter dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
-
-
-
From Ground (P01) up to First (P02) Floor
9
-
-
From First (P02) Floor up to Second (P03) Floor
6
-
-
From Second (P03) Floor up to Third (P04) Floor
4
-
-
From Third (P04) Floor up to Forth (L01) Floor
4
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
27
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
21
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
30
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
75
-
-
From Eighth (L05) Floor up to Terrace Floor
101
-
-
Terrace Floor (As the part of Eighth floor)
76
-
-
Providing and fixing on walls/ceiling/floor 32 millimeter dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
22
-
-
From Ground (P01) up to First (P02) Floor
5
-
-
From First (P02) Floor up to Second (P03) Floor
8
-
-
From Second (P03) Floor up to Third (P04) Floor
9
-
-
From Third (P04) Floor up to Forth (L01) Floor
10
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
22
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
22
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
23
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
45
-
-
From Eighth (L05) Floor up to Terrace Floor
40
-
-
Terrace Floor (As the part of Eighth floor)
35
-
-
Providing and fixing on walls/ceiling/floor 40 millimeter dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
40
-
-
From Ground (P01) up to First (P02) Floor
4
-
-
From First (P02) Floor up to Second (P03) Floor
4
-
-
From Second (P03) Floor up to Third (P04) Floor
4
-
-
From Third (P04) Floor up to Forth (L01) Floor
6
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
10
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
23
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
22
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
22
-
-
From Eighth (L05) Floor up to Terrace Floor
23
-
-
Terrace Floor (As the part of Eighth floor)
18
-
-
Providing and fixing on walls/ceiling/floor 50 millimeter dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
From Ground (P01) up to First (P02) Floor
4
-
-
From First (P02) Floor up to Second (P03) Floor
4
-
-
From Second (P03) Floor up to Third (P04) Floor
4
-
-
From Third (P04) Floor up to Forth (L01) Floor
4
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
5
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
26
-
-
From Eighth (L05) Floor up to Terrace Floor
26
-
-
Providing and fixing CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes Schedule 80 Pipes to be used from 65millimeter. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.
-
-
-
Terrace Floor (As the part of Eighth floor)
650
-
-
Providing, fixing , testing and commissioning pressure reducing station for 25millimeter flush water supply comprising of 1 No pressure reducing valve with flanged/ screwed connection, 1 No. `Y' strainer, 2 Nos Pressure gauge on inlet & outlet, . The complete system is tested to a pressure not less than 15 Kilogram/Square.centimeter and suitable to reduce the pressure upto 2 Kilogram/Square.centimeter) Including necessary pipe & fittings; i.e. flanges/ unions, nuts, bolts and washers complete as required.
-
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
Providing, fixing , testing and commissioning pressure reducing station for 32millimeter cold water supply comprising of 1 No pressure reducing valve with flanged/ screwed connection, 1 No. `Y' strainer, 2 Nos Pressure gauge on inlet & outlet, . The complete system is tested to a pressure not less than 15 Kilogram/Square.centimeter and suitable to reduce the pressure upto 2 Kilogram/Square.centimeter) Including necessary pipe & fittings; i.e. flanges/ unions, nuts, bolts and washers complete as required.
-
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
Providing and laying in trenches 40 millimeter dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc.
-
-
-
From Ground (P01) up to First (P02) Floor
10
-
-
Providing and laying in trenches 50 millimeter dia. CPVC pipe including necessary excavation, fittings. Refilling trenches etc.
-
-
-
From Ground (P01) up to First (P02) Floor
18
-
-
Providing & fixing 15 millimeter male/ female screwed end full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated ball & Teflon seat tested to a pressure 15 Kilogram / sqcentimeter with (threaded joints) complete as required.
-
-
-
From Eighth (L05) Floor up to Terrace Floor
22
-
-
Providing & fixing 20millimeter male/ female screwed end full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated ball & Teflon seat tested to a pressure 15 Kilogram / sqcentimeter with (threaded joints) complete as required.
-
-
-
Terrace Floor (As the part of Eighth floor)
21
-
-
Providing & fixing 25 millimeter male/ female screwed end full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated ball & Teflon seat tested to a pressure 15 Kilogram / sqcentimeter with (threaded joints) complete as required.
-
-
-
Terrace Floor (As the part of Eighth floor)
33
-
-
Providing & fixing 32millimeter male/ female screwed end full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated ball & Teflon seat tested to a pressure 15 Kilogram / sqcentimeter with (threaded joints) complete as required.
-
-
-
Terrace Floor (As the part of Eighth floor)
15
-
-
Providing & fixing 40 millimeter male/ female screwed end full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated ball & Teflon seat tested to a pressure 15 Kilogram / sqcentimeter with (threaded joints) complete as required.
-
-
-
Terrace Floor (As the part of Eighth floor)
9
-
-
Providing & fixing 50 millimeter male/ female screwed end full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated ball & Teflon seat tested to a pressure 15 Kilogram / sqcentimeter with (threaded joints) complete as required.
-
-
-
Terrace Floor (As the part of Eighth floor)
18
-
-
Providing and fixing of 65 millimeter C.I. Butterfly valve (Body : Grey Cast Iron, shaft : SS, Disc : SG Iron (nickel plated), Liner : HT - EPDM/Nylon) of approved make with flange, washer, nuts & bolts and PN 10/16 pressure rating including rubber gasket & painting complete.
-
-
-
Terrace Floor (As the part of Eighth floor)
2
-
-
Supplying and erecting 40millimeter dia. Gun metal foot valve at position with necessary materials.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
Supplying and erecting 50millimeter dia. Gun metal foot valve at position with necessary materials.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
Providing & Fixing 15 millimeter dia air release valve with filter, for cold water supply risers, suitable for pressure of 10 Kilogram/Square.centimeter. including flanges / union, nuts, bolts, washer etc., complete.
-
-
-
Terrace Floor (As the part of Eighth floor)
10
-
-
Providing & Fixing of 32 millimeter solenoid valve for start & stop of pump, to be provided on the pump rising main line to OHT .
-
-
-
Terrace Floor (As the part of Eighth floor)
1
-
-
Providing & Fixing of 40 millimeter solenoid valve for start & stop of pump, to be provided on the pump rising main line to OHT .
-
-
-
Terrace Floor (As the part of Eighth floor)
1
-
-
Providing & fixing 50 millimeter dia dual flanged C.I. `Y' Strainer with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required.
-
-
-
Terrace Floor (As the part of Eighth floor)
1
-
-
Providing & fixing 65 millimeter dia dual flanged C.I. `Y' Strainer with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required.
-
-
-
Terrace Floor (As the part of Eighth floor)
1
-
-
Providing and fixing 50millimeter diameter water meter with nonreturn valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock.(without chamber)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
Providing and constructing Brick Masonry Inspection Chamber 60centimeter x 45centimeter x 90centimeter including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram with frame etc complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
EXTERNAL HOT WATER SUPPLY
-
-
-
Supplying and erecting 25/32 millimeter (ID/OD) polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for Solar Water Heater System as per specification No.(ESD-HWP/PCP)
-
-
-
Terrace Floor (As the part of Eighth floor)
65
-
-
Supplying and erecting 16/20 millimeter (ID/OD) polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for Solar Water Heater System as per specification No.(ESD-HWP/PCP)
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
4
-
-
From Eighth (L05) Floor up to Terrace Floor
24
-
-
Terrace Floor (As the part of Eighth floor)
65
-
-
Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided PCP pipes / copper pipes having 9 millimeter thickness and inner diameter / sizes 19 millimeter for Solar Water Heater System as per specification no ESD-ENR
-
-
-
Terrace Floor (As the part of Eighth floor)
65
-
-
Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided PCP pipes / copper pipes having 9 millimeter thickness and inner diameter / sizes 16 millimeter for Solar Water Heater System as per specification no ESD-ENR
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
4
-
-
From Eighth (L05) Floor up to Terrace Floor
24
-
-
Terrace Floor (As the part of Eighth floor)
65
-
-
Providing & fixing 20millimeter male/ female screwed end full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated ball & Teflon seat tested to a pressure 15 Kilogram / square centimeter with (threaded joints) complete as required.
-
-
-
Terrace Floor (As the part of Eighth floor)
5
-
-
SOLAR SYSTEM
-
-
-
Supply,Installation,Testing and comissioning of Solar Flat Plate Collector ISI mark Absorber: Copper fin tubes & tubes, 9 Nos Selective black chrome plated Absorbivity - 0.96, Emissivity: - 0.12 Body: Extruded Aluminum section Aluminum back sheet Insulation: 50millimeter thk Rockwool of 48Kg/m3 density & aluminum coil Glass: 3.2millimeter thk Textured tempered / toughened glass transmissivity 90% Solar Hot water Tank 500LPD =1 Nos Material: Stainless steel SS304 tank 10 SWG (3.25millimeter)thk Insulation: Rockwool of 100millimeter thk , 48Kg/m3 density & Aluminium cladding of 24SWG or Puff insulated with GI powder coated cladding System piping to connect solar tank to solar collector -15 meter GI 3/4inch C- class pipe Jindal or approved equivalent make with puff insulation for connection solar collector to solar tank.Support Structure for solar collector & solar tank ( on flat RCC roof) - 750Kg MS support stand for solar collectors& solar tank painted with rust protected primer & paint Dead wt valve, Air release valve, Air keys , Ball valve: 1inch : 1 No, NRV 1inch:1 No
1
-
-
INTERNAL DRAINAGE
-
-
-
Providing , fixing & testing soundproof Multilayer Polypropylene piping system(HDPE) of 40millimeter as per EN 1451-Part 1-6 with 3 layer pipe made of PP + PP-MD + PP and one layer fittings in PP MD, push-fit type, Halogen and Calcium free, having high impact resistance as per DIN EN ISO 291:2008-08 , Ring stiffness SN6 6KN/m2 as per ISO 9969, offering sound levels of not more than 20 dBA as per EN 14366 at a flow rate of 4 l/s, water tightness as per EN 1451-1 minimum of 0.5 bar for 15 minutes, density of pipe = 1.15gms/Cubic centimeter, elongation = 0.09millimeter/m0K and E modulus 2300-3000 as per ISO 178, along with factory fitted EPDM lip ring. (Make- HULIOT Ultra Sound or approved equivalent)”(Rate need to be inclusive of all fittings& Huliot Round bracket,accesories etc).Providing Huliot Ultraseal is also part of above discription.
-
-
-
From Ground (P01) up to First (P02) Floor
3
-
-
From First (P02) Floor up to Second (P03) Floor
3
-
-
From Second (P03) Floor up to Third (P04) Floor
3
-
-
From Third (P04) Floor up to Forth (L01) Floor
3
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
47
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
47
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
52
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
47
-
-
From Eighth (L05) Floor up to Terrace Floor
55
-
-
Providing , fixing & testing soundproof Multilayer Polypropylene piping system of 50millimeter as per EN 1451-Part 1-6 with 3 layer pipe made of PP + PP-MD + PP and one layer fittings in PP MD, push-fit type, Halogen and Calcium free, having high impact resistance as per DIN EN ISO 291:2008-08 , Ring stiffness SN6 6KN/m2 as per ISO 9969, offering sound levels of not more than 20 dBA as per EN 14366 at a flow rate of 4 l/s, water tightness as per EN 1451-1 minimum of 0.5 bar for 15 minutes, density of pipe = 1.15gms/Cubic centimeter, elongation = 0.09millimeter/m0K and E modulus 2300-3000 as per ISO 178, along with factory fitted EPDM lip ring. (Make- HULIOT Ultra Sound or approved equivalent)”(Rate need to be inclusive of all fittings& Huliot Round bracket,accesories etc).Providing Huliot Ultraseal is also part of above discription.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
9
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
12
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
12
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
12
-
-
From Eighth (L05) Floor up to Terrace Floor
9
-
-
Providing , fixing & testing of 75 millimeter soundproof Multilayer Polyproplene piping system(HIGH DENSITY POLYETHYLENE) as per EN 1451-Part 1-6 with 3 layer pipe made of PP + PP-MD + PP and one layer fittings in PP MD, push-fit type,Halogen and Calcium free, having high impact resistance as per DIN EN ISO 291:2008-08 , Ring stiffness SN6 6KN/m2 as per ISO 9969, offering sound levels of not more than 20 dBA as per EN 14366 at a flow rate of 4 l/s, water tightness as per EN 1451-1 minimum of 0.5 bar for 15 minutes, density of pipe = 1.15gms/Cubic centimeter, elongation = 0.09millimeter/m0K and E modulus 2300-3000 as per ISO 178, along with factory fitted EPDM lip ring.
-
-
-
From Ground (P01) up to First (P02) Floor
5
-
-
From First (P02) Floor up to Second (P03) Floor
5
-
-
From Second (P03) Floor up to Third (P04) Floor
5
-
-
From Third (P04) Floor up to Forth (L01) Floor
5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
105
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
95
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
95
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
95
-
-
From Eighth (L05) Floor up to Terrace Floor
115
-
-
Providing , fixing & testing of 110millimeter soundproof Multilayer Polyproplene piping system(HIGH DENSITY POLYETHYLENE) as per EN 1451-Part 1-6 with 3 layer pipe made of PP + PP-MD + PP and one layer fittings in PP MD, push-fit type,Halogen and Calcium free, having high impact resistance as per DIN EN ISO 291:2008-08 , Ring stiffness SN6 6KN/m2 as per ISO 9969, offering sound levels of not more than 20 dBA as per EN 14366 at a flow rate of 4 l/s, water tightness as per EN 1451-1 minimum of 0.5 bar for 15 minutes, density of pipe = 1.15gms/Cubic centimeter, elongation = 0.09millimeter/m0K and E modulus 2300-3000 as per ISO 178, along with factory fitted EPDM lip ring.
-
-
-
From Ground (P01) up to First (P02) Floor
3
-
-
From First (P02) Floor up to Second (P03) Floor
3
-
-
From Second (P03) Floor up to Third (P04) Floor
3
-
-
From Third (P04) Floor up to Forth (L01) Floor
3
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
15
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
22
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
25
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
22
-
-
From Eighth (L05) Floor up to Terrace Floor
35
-
-
Providing, fixing, jointing and testing Poly-propylene multi traps 100 millimeter dia. of self cleansing design with water seal not less than 50 millimeter, jointing with rubbering / solvent / solution and airtight joints, with necessary specials, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required.Temporary airtight PVC cover to be provided to prevent dirt entry.
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
23
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
24
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
26
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
26
-
-
From Eighth (L05) Floor up to Terrace Floor
33
-
-
Providing, fixing, jointing and ,testing in position Heavy class S.S. grating with Mosquito proof S.S. strainer of Chilly or approved equivalent make, as approved, (cockroach trap) including setting in floor with cement mortar to match with floor finish as per architect requirements Size 150 millimeter x 150 millimeter or 125 millimeter dia
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
23
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
24
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
26
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
26
-
-
From Eighth (L05) Floor up to Terrace Floor
33
-
-
Providing, fixing, jointing and testing in position Heavy class pvc/hdpe/brass floor cleant out with all necessary aceesories as app including setting in floor with cement mortar to match with floor finish as per architect requirements Suitable for 160 dia. NB pipe.
-
-
-
From Third (P04) Floor up to Forth (L01) Floor
6
-
-
Providing, fixing, jointing and testing in position Heavy class pvc/hdpe/brass floor cleant out with all necessary aceesories as app including setting in floor with cement mortar to match with floor finish as per architect requirements . Suitable for 110 dia. NB pipe.
-
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
3
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
4
-
-
From Eighth (L05) Floor up to Terrace Floor
5
-
-
Providing, fixing, jointing and testing in position Heavy class pvc/hdpe/brass floor cleant out with all necessary aceesories as app including setting in floor with cement mortar to match with floor finish as per architect requirements . Suitable for 75 dia. NB pipe.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
8
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
8
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
8
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
8
-
-
From Eighth (L05) Floor up to Terrace Floor
7
-
-
Providing, fixing, jointing and testing Poly-propylene nanhi trap 100 millimeter dia. of self cleansing design with water seal not less than 50 millimeter, jointing with rubbering / solvent / solution and airtight joints, with necessary specials, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be of following sizes: Temporary airtight PVC cover to be provided to prevent dirt entry. (for individual terrace storm water)
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
17
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
16
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
16
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
16
-
-
From Eighth (L05) Floor up to Terrace Floor
16
-
-
Providing, fixing, jointing and ,testing in position Heavy class S.S. grating with Mosquito proof S.S. strainer of Chilly or equivalent make, as approved, (cockroach trap) including setting in floor with cement mortar to match with floor finish as per architect requirements SIZE : 150 millimeter x 150 millimeter(for Terrace rain water) (for individual terrace storm water)
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
17
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
16
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
16
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
16
-
-
From Eighth (L05) Floor up to Terrace Floor
16
-
-
Providing and fixing on floor 20 millimeter dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. for spouts
-
-
-
From Ground (P01) up to First (P02) Floor
0.3
-
-
From First (P02) Floor up to Second (P03) Floor
0.3
-
-
From Second (P03) Floor up to Third (P04) Floor
0.3
-
-
From Third (P04) Floor up to Forth (L01) Floor
0.3
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2.1
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2.5
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
EXTERNAL DRAINAGE
-
-
-
Providing and laying concrete pipes of I.S.NP. class of 150millimeter diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
-
-
-
From Ground (P01) up to First (P02) Floor
72
-
-
Providing and laying concrete pipes of I.S.NP. class of 225millimeter diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
-
-
-
From Ground (P01) up to First (P02) Floor
201
-
-
Providing and laying concrete pipes of I.S.NP. class of 300millimeter diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
-
-
-
From Ground (P01) up to First (P02) Floor
26
-
-
Providing and constructing Brick Masonry Inspection Chamber 90centimeter x 45centimeter x 90centimeter including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover heavy duty (225kg) with frame etc complete.
-
-
-
From Ground (P01) up to First (P02) Floor
4
-
-
Providing and constructing Brick Masonry inspection trap Chamber 90centimeter x 45centimeter including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover heavy duty 225 Kilogram. etc complete
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
Providing, fixing, jointing and testing Salt glazed stoneware gully trap, class `A', of 100 millimeter. dia. inlet and 100 millimeter. outlet, including excavation in all soil types, bailing or pumping out water from trenches, shoring whenever necessary testing, refilling, in layers ramming & consolidation, removing away the surplus earth & spoils, dumping it on site or carting away to lead of 100 meters as directed, incl. embedding the trap in CC 1:2:4, construction of brick masonry chamber, internal clear size 300 millimeter. x 300 millimeter., in brick work 230 millimeter. thick, in CM 1:4, plastering inside, outside and all exposed surfaces with CM 1:3, 12 millimeter. thick, providing, fixing CI frame and cover 300 x 300 millimeter., weighing together not less than 12.5 Kilogram., painting of all CI items with 3 coats of approved bitumastic paint, etc. complete.
-
-
-
From Ground (P01) up to First (P02) Floor
3
-
-
Construction of 450 x900 millimeter chamber of inside clear dimensions for rain water in brick work in cement mortar 1:5 necessary foundation concrete (1:4:8) inside plastering 15 millimeter thick with cement mortar 1:4 and rough plaster 20 millimeter thick on outside with a floating of neat cement. Including the RCC top frame Grating High Duty (Kilogram) for fixing Cover / grating with frame. Including necessary excavation in all soil types, dewatering, refilling, watering, ramming, removing the surplus excavated material up to a lead of 100 meter and making good the same complete as required. The required depth of chamber varies from 600 to 1200millimeter. The rate includes connections to trenches / pipes.
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
Construction of 600x600 millimeter chamber of inside clear dimensions for rain water in brick work in cement mortar 1:5 necessary foundation concrete (1:4:8) inside plastering 15 millimeter thick with cement mortar 1:4 and rough plaster 20 millimeter thick on outside with a floating of neat cement. Including the RCC top frame Grating High Duty (Kilogram) for fixing Cover / grating with frame. Including necessary excavation in all soil types, dewatering, refilling, watering, ramming, removing the surplus excavated material up to a lead of 100 meter and making good the same complete as required. The required depth of chamber varies from 600 to 1200millimeter. The rate includes connections to trenches / pipes.
-
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
Construction of 450x450 millimeter chamber of inside clear dimensions for rain water in brick work in cement mortar 1:5 necessary foundation concrete (1:4:8) inside plastering 15 millimeter thick with cement mortar 1:4 and rough plaster 20 millimeter thick on outside with a floating of neat cement. Including the RCC top frame Grating High Duty (Kilogram) for fixing Cover / grating with frame. Including necessary excavation in all soil types, dewatering, refilling, watering, ramming, removing the surplus excavated material up to a lead of 100 meter and making good the same complete as required. The required depth of chamber varies from 600 to 1200millimeter. The rate includes connections to trenches / pipes.
-
-
-
From Ground (P01) up to First (P02) Floor
13
-
-
RWH - Recharge Pit . Providing, constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300millimeter thick sidefilling around outside of RCC rings (annular space) with 40millimeter size boulders including filling of recharge pit up to 0.5m depth with 25-75millimeter clean washed gravels from bottom up followed by 0.5m depth of 10-25millimeter of clean washed stones followed by 0.5m of washed river sand including netlon mesh between each gravel/sand media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
Providing & fixing rainy filter suitable upto 340 lpm capacity with SS-304 screen filter element of 250 microns & inlet dia 110millimeter with HDPE housing and operating pressure 0.060kg/cm2.(Make :Rainy filters or approved equivalent)
-
-
-
Terrace Floor (As the part of Eighth floor)
7
-
-
Constructing Brick Masonry Open surface drain with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 fine sand) including earth excavation, 100 millimeter thick bed concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 millimeter nominal size) and 25 millimeter thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 millimeter nominal size) for filling haunches including 12 millimeter cement plaster 1:4 (1 cement : 4 coarse sand) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design: A) 150millimeter wide drain with avarage depth 150millimeter
-
-
-
From Ground (P01) up to First (P02) Floor
70
-
-
From First (P02) Floor up to Second (P03) Floor
70
-
-
From Second (P03) Floor up to Third (P04) Floor
70
-
-
From Third (P04) Floor up to Forth (L01) Floor
70
-
-
Constructing Brick Masonry Open surface drain with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 fine sand) including earth excavation, 100 millimeter thick bed concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 millimeter nominal size) and 25 millimeter thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 millimeter nominal size) for filling haunches including 12 millimeter cement plaster 1:4 (1 cement : 4 coarse sand) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design: B) 300millimeter wide drain with avarage depth 450millimeter
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
82
-
-
Constructing Brick Masonry Open surface drain with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 fine sand) including earth excavation, 100 millimeter thick bed concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 millimeter nominal size) and 25 millimeter thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 millimeter nominal size) for filling haunches including 12 millimeter cement plaster 1:4 (1 cement : 4 coarse sand) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design: C) 450millimeter wide drain with avarage depth 600millimeter
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
25
-
-
Providing, fixing, jointing and testing 50 millimeter Dia air admittance valve with filter & Aluminium cover including flanges / union, nuts, bolts, washer etc., complete. Temperature range -20 deg C to 60 deg C.It should be replaceable
-
-
-
Terrace Floor (As the part of Eighth floor)
21
-
-
Providing, fixing, jointing and testing 75 millimeter air admittance valve with filter & Aluminium cover including flanges / union, nuts, bolts, washer etc., complete. Temperature range -20 deg C to 60 deg C.It should be replaceable
-
-
-
Terrace Floor (As the part of Eighth floor)
21
-
-
Providing, fixing, jointing and testing 110 millimeter air admittance valve with filter & Aluminium cover including flanges / union, nuts, bolts, washer etc., complete. Temperature range -20 deg C to 60 deg C.It should be replaceable
-
-
-
Terrace Floor (As the part of Eighth floor)
21
-
-
Providing, fixing, jointing and testing of 160millimeter soundproof Multilayer Polyproplene piping system(HIGH DENSITY POLYETHYLENE) as per EN 1451-Part 1-6 with 3 layer pipe made of PP + PP-MD + PP and one layer fittings in PP MD, push-fit type,Halogen and Calcium free, having high impact resistance as per DIN EN ISO 291:2008-08 , Ring stiffness SN6 6KN/m2 as per ISO 9969, offering sound levels of not more than 20 dBA as per EN 14366 at a flow rate of 4 l/s, water tightness as per EN 1451-1 minimum of 0.5 bar for 15 minutes, density of pipe = 1.15gms/Cubic centimeter, elongation = 0.09millimeter/m0K and E modulus 2300-3000 as per ISO 178, along with factory fitted EPDM lip ring.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
132
-
-
From Ground (P01) up to First (P02) Floor
282
-
-
From First (P02) Floor up to Second (P03) Floor
32
-
-
From Second (P03) Floor up to Third (P04) Floor
32
-
-
From Third (P04) Floor up to Forth (L01) Floor
122
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
37
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
37
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
37
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
37
-
-
From Eighth (L05) Floor up to Terrace Floor
32
-
-
Providing, fixing, jointing and testing of 110millimeter soundproof Multilayer Polyproplene piping system(HIGH DENSITY POLYETHYLENE) as per EN 1451-Part 1-6 with 3 layer pipe made of PP + PP-MD + PP and one layer fittings in PP MD, push-fit type,Halogen and Calcium free, having high impact resistance as per DIN EN ISO 291:2008-08 , Ring stiffness SN6 6KN/m2 as per ISO 9969, offering sound levels of not more than 20 dBA as per EN 14366 at a flow rate of 4 l/s, water tightness as per EN 1451-1 minimum of 0.5 bar for 15 minutes, density of pipe = 1.15gms/Cubic centimeter, elongation = 0.09millimeter/m0K and E modulus 2300-3000 as per ISO 178, along with factory fitted EPDM lip ring.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
50
-
-
From Ground (P01) up to First (P02) Floor
170
-
-
From First (P02) Floor up to Second (P03) Floor
64
-
-
From Second (P03) Floor up to Third (P04) Floor
64
-
-
From Third (P04) Floor up to Forth (L01) Floor
92
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
115
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
115
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
115
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
115
-
-
From Eighth (L05) Floor up to Terrace Floor
115
-
-
Terrace Floor (As the part of Eighth floor)
50
-
-
Providing, fixing, jointing and testing of 75millimeter soundproof Multilayer Polyproplene piping system(HIGH DENSITY POLYETHYLENE) as per EN 1451-Part 1-6 with 3 layer pipe made of PP + PP-MD + PP and one layer fittings in PP MD, push-fit type,Halogen and Calcium free, having high impact resistance as per DIN EN ISO 291:2008-08 , Ring stiffness SN6 6KN/m2 as per ISO 9969, offering sound levels of not more than 20 dBA as per EN 14366 at a flow rate of 4 l/s, water tightness as per EN 1451-1 minimum of 0.5 bar for 15 minutes, density of pipe = 1.15gms/Cubic centimeter, elongation = 0.09millimeter/m0K and E modulus 2300-3000 as per ISO 178, along with factory fitted EPDM lip ring.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
93
-
-
From Ground (P01) up to First (P02) Floor
60
-
-
From First (P02) Floor up to Second (P03) Floor
60
-
-
From Second (P03) Floor up to Third (P04) Floor
60
-
-
From Third (P04) Floor up to Forth (L01) Floor
205
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
110
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
110
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
110
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
110
-
-
From Eighth (L05) Floor up to Terrace Floor
110
-
-
Terrace Floor (As the part of Eighth floor)
25
-
-
VENT PIPE
-
-
-
Providing and fixing soundproof Multilayer Polypropylene piping system of 50millimeter as per EN 1451-Part 1-6 with 3 layer pipe made of PP + PP-MD + PP and one layer fittings in PP MD, push-fit type, Halogen and Calcium free, having high impact resistance as per DIN EN ISO 291:2008-08 , Ring stiffness SN6 6KN/m2 as per ISO 9969, offering sound levels of not more than 20 dBA as per EN 14366 at a flow rate of 4 l/s, water tightness as per EN 1451-1 minimum of 0.5 bar for 15 minutes, density of pipe = 1.15gms/Cubic centimeter, elongation = 0.09millimeter/m0K and E modulus 2300-3000 as per ISO 178, along with factory fitted EPDM lip ring. (Make- HULIOT Ultra Sound or approved equivalent)”(Rate need to be inclusive of all fittings& Huliot Round bracket,accesories etc).Providing Huliot Ultraseal is also part of above discription.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
5
-
-
From Ground (P01) up to First (P02) Floor
5
-
-
From First (P02) Floor up to Second (P03) Floor
5
-
-
From Second (P03) Floor up to Third (P04) Floor
5
-
-
From Third (P04) Floor up to Forth (L01) Floor
5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
47
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
51
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
51
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
70
-
-
From Eighth (L05) Floor up to Terrace Floor
89
-
-
Terrace Floor (As the part of Eighth floor)
25
-
-
Providing, fixing, jointing and ,testing in position Heavy class S.S. grating with Mosquito proof S.S. strainer of Chilly or approved equivalent make, as approved, (cockroach trap) including setting in floor with cement mortar to match with floor finish as per architect requirements
SIZE : 150 millimeter x 150 millimeter (for terrace rain water)
-
-
-
Terrace Floor (As the part of Eighth floor)
1
-
-
Providing and laying perforated PVC 160 millimeter dia pipe in proper line, level and slope including necessary material fitting etc. complete.
-
-
-
From Ground (P01) up to First (P02) Floor
100
-
-
Providing & Fixing ready made 50L Grease trap as per Manufacturer's standard including top cover and all related accessories along with comminsioning as including fittings etc complete of follwing sizes. Make Ashirwad or approved equivalent , shall be complete with all the accessories like the grid screen and all the accessories including inlet and outletas directed by site incharge and making good the same complete as required.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
1
-
-
CORE CUTS AND SLEEVE
-
-
-
Providing and making core cut of following dia in RCC slabs / beams etc. of thickness upto 250millimeter, with core cutting machine inclusive of filling of core cut with fire retardant sealant (manufactured by HILTI or approved equivalent) as per the manufacturer's specification, cleaning etc complete. The contractor should determine the exact location of the RCC element before carrying out the operation, getting prior approval from the structural consultant and cutting all reinforcement by gas cutting machine or as directed etc. complete. (Note: Firestop Sealant CP 601S manufactured By HILTI or approved equivalent) shall be used for gaps upto 20millimeter and Firestop Sealant CP 606 (manufactured by HILTI or approved equivalent) shall be used for gaps above 20millimeter)
Cutting Cores in vertical direction Up to 200millimeter dia
-
-
-
From Ground (P01) up to First (P02) Floor
5
-
-
From First (P02) Floor up to Second (P03) Floor
5
-
-
From Second (P03) Floor up to Third (P04) Floor
5
-
-
From Third (P04) Floor up to Forth (L01) Floor
5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
55
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
55
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
60
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
55
-
-
From Eighth (L05) Floor up to Terrace Floor
72
-
-
Providing and fixing pipe sleeves up to 400millimeter length of 6Kg/cm2 class of required diameter and threaded ends etc. including necessary cutting, flange, fixing in position, levelling, at all levels/heights, scaffolding, staging etc. complete as per drawings and as directed by Engineer in charge. (Item shall be paid for only material. Labour for fixing shall be paid under item for Centring & shuttering)
-
-
-
Sleeves with 40millimeter dia NB GI pipe
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
Sleeves with 50millimeter dia NB GI pipe
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
7
-
-
Sleeves with 80millimeter dia NB GI pipe
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
10
-
-
Sleeves with 110millimeter dia NB GI pipe
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
Sleeves with 150millimeter dia NB GI pipe
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
5
-
-
Providing & fixing in position medium duty DI manhole cover & frame of size 900x 900millimeter clear of NECO make or approved equivalent including provision for locking arrangements, neat dressing & making good around the cover all complete as directed by Engineer-in-charge.
-
-
-
For Under Ground Tank
9
-
-
For STP
2
-
-
Providing & fixing in position medium duty CI rungs of size 400x 300millimeter clear of NECO make or approved equivalent including, neat dressing & making good and leakproof around the cover all complete as directed by Engineer-in-charge.
-
-
-
For Pump room & water tank
95
-
-
For STP
20
-
-
FIRE SEALENT
-
-
-
Providing and fixing Fire resistant Mineral Wool Board system with minimum 2 hours fire rating when tested in accordance with BS 476 part 20 for vertical openings in walls after passing service lines like electrical cables trays, metal pipes, Plastic Pipes, ducts etc. The system shall comprise of a mineral wool board coated with an ablative coating at 0.7millimeter dft. on both sides, mineral wool board shall be of min.160 Kilogram/Cubic meter density, all contact surfaces and cavities shall be sealed with a joint filler, intumescent sealants and intumescent wraps, The product shall be age tested for as per Dafstb and DIBT standards, carry test certificate for mold resistance rating of 0 (zero) as determined by ASTM G21-96. Fire paint & Sealants shall be UL listed & classified and shall bear the UL and FM approval logo on the packing. Firestop installation should be done by the trained applicators and in accordance with manufacturer's guidelines/specifications as directed by the Engineer-in-charge. Fire resistant Mineral Wool Board system, with ablative coating manufactured by Hilti or approved equivalent.
-
-
-
From Ground (P01) up to First (P02) Floor
5
-
-
From First (P02) Floor up to Second (P03) Floor
5
-
-
From Second (P03) Floor up to Third (P04) Floor
5
-
-
From Third (P04) Floor up to Forth (L01) Floor
5
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
53
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
55
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
59
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
55
-
-
From Eighth (L05) Floor up to Terrace Floor
72
-
-
Plastic Pipe diameter of 2'' (FS One Firestop Sealant) - For Floor & Wall
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
From First (P02) Floor up to Second (P03) Floor
1
-
-
From Second (P03) Floor up to Third (P04) Floor
1
-
-
From Third (P04) Floor up to Forth (L01) Floor
1
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
24
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
23
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
25
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
23
-
-
From Eighth (L05) Floor up to Terrace Floor
27
-
-
Plastic Pipe diameter of 5'' (CP 648-E Firestop Wrap), minimum hole dia. in wall/floor shall be 152 millimeter -For Floor
For MFT & WC
-
-
-
From Ground (P01) up to First (P02) Floor
4
-
-
From First (P02) Floor up to Second (P03) Floor
4
-
-
From Second (P03) Floor up to Third (P04) Floor
4
-
-
From Third (P04) Floor up to Forth (L01) Floor
4
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
29
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
32
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
34
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
32
-
-
From Eighth (L05) Floor up to Terrace Floor
45
-
-
WATER TRANSFER PUMPS
-
-
-
HYDROPNEUMATIC SYSTEM
-
-
-
Providing, fixing , testing and commissioning Variable Speed Hydro-Pneumatic System for domestic water supply for entire building:Compact self contained Hydro-booster system comprising of following :
In-line, vertial multistage, centrifugal clear water pumps with SS-304 casing, S.S 304 impeller and SS-304 shaft, C.I. Base CED coating & head TEFC motor (with mechanical seal) Vendor to submit performance curves and technical catalogue of the proposed model for review and information as per selection in the given specifications.Panel mounted microprocessor multi pump contoller with large graphical display with VGA 240 x 320 pixels and individual variable frequency drive (VFD) integrated in a single body or as separate components with pressure sensor transmitter (one dedicated to each pump), diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocol through RS485 port / WI-FI connectivity System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equipped with dry running protection. Indication of all type of faults / on-off status / electrical parameters shall be available on panel and central IBMS monitors. On-off operation for all pumps shall be availble on BMS system as per manufacturares / suppliers considerations. Pre-charged diaphragm pressure vessel with interchangeable membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc. complete (size of pressure vessel shall be 100 liters - 1 nos (approx.) or as per manufacturer recommendation).Set of accessories such as SS 304 headers for suction and discharge, control valves, non return valves, pressure switches, pressure transducers, pressure gauge, flow meters, inter connecting power and control cabling etc.complete.
-
-
-
For supplying domestic cold Water to all the areas - Capacity per pump - 3.0lps [10 Cubic meter/hour]
Head - 65mtr.
Approx. Elec. Load. - ( approx.3.1 hp ) 1 Set = 3 Nos. Pump (2 Working + 1 Standby -cascade operation) all three with VFD independent working.
Suction head-Positive sucrtion as pump is above water tank.All pipes of SS 304 - Tata / Jindal Make. Suction delivery headers in 63 Dia pipes with flanged ends on all the sidesNRV & Butterfly valves heavy duty PN 16 across delivery side for each pump of C&R / Inter Valve / Castle or approved equivalent MAKE Strainers heavy duty PN 16 across suction header for each pumps of Zoloto / Emerald/Maharaja Casting Make Priming POT of 140 Ltrs. Mounted on SKID along with PUMP units with : independent connection of OHT to Priming POT for gravity filling with NRV and Ball valve for isolation Pump suction pipe of CPVC schedule - 80 of pipe to pump suction headers in 65 Dia pipes with flanged ends on all the sides, inclusive of STRAINER + FOOT VALVE with all Accessories
1
-
-
FLUSHING WATER SUPPLY SYSTEM FOR THE BUILDING
-
-
-
Providing, fixing , testing and commissioning Variable Speed Hydro-Pneumatic System for Flushing water supply for entire building: Compact self contained Hydro-booster system comprising of following : In-line, vertial multistage, centrifugal clear water pumps with SS-304 casing, S.S 304 impeller and SS-304 shaft, C.I. Base CED coating & head TEFC motor (with mechanical seal) Vendor to submit performance curves and technical catalogue of the proposed model for review and information as per selection in the given specifications Panel mounted microprocessor multi pump contoller with large graphical display with VGA 240 x 320 pixels and individual variable frequency drive (VFD) integrated in a single body or as separate components with pressure sensor transmitter (one dedicated to each pump), diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocol through RS485 port / WI-FI connectivity System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equipped with dry running protection. Indication of all type of faults / on-off status / electrical parameters shall be available on panel and central IBMS monitors. On-off operation for all pumps shall be availble on BMS system as per manufacturares / suppliers considerations .Pre-charged diaphragm pressure vessel with interchangeable membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc. complete (size of pressure vessel shall be 100 liters - 1 nos (approx.) or as per manufacturer recommendation). Set of accessories such as SS 304 headers for suction and discharge, control valves, non return valves, pressure switches, pressure transducers, pressure gauge, flow meters, inter connecting power and control cabling etc. complete.
-
-
-
For supplying Flushing Water to all the areas - Capacity per pump - 3.0lps [10 Cubic meter/hour] ,Head - 65mtr. ,Approx. Elec. Load. - ( approx.3.1 hp ) 1 Set = 3 Nos. Pump (2 Working + 1 Standby -cascade operation) all three with VFD independent working Suction head - Positive sucrtion as pump is above water tank.SITC of Valve Stations comprising of delivery headers with NRV, Strainers, ball valves as per mouth sizes of pumps as under - All pipes of SS 304 - Tata / Jindal Make. Suction delivery headers in 63 Dia pipes with flanged ends on all the sides,NRV & Butterfly valves heavy duty PN 16 across delivery side for each pump of C&R / Inter Valve / Castle MAKE ,Strainers heavy duty PN 16 across suction header for each pumps of Zoloto / Emerald/Maharaja Casting Make ,Priming POT of 140 Ltrs. Mounted on SKID along with PUMP units with : independent connection of OHT to Priming POT for gravity filling with NRV and Ball valve for isolation Pump suction pipe of CPVC schedule - 80 of pipe to pump suction headers in 65 Dia pipes with flanged ends on all the sides, inclusive of STRAINER + FOOT VALVE with all Accessories
1
-
-
Providing, fixing , testing and commissioning Basement (Sump) Mud Pumps with grinder: Supply, installation, testing & commissioning of Submersible single stage single entry pumps connected to TEFC submersible motor for 415 + 10% volts, 3phase, 50cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, electrical panel with in built level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level as determined. The pump shall be provided with a lifting devise of pull chain/guide rail & SS 304 heavy class rising main of 5m length including interconnecting piping, valves (Ball Valve / Butterfly), Non return valves (GM/CI) 15 meter cable etc. as per requirement complete in all respects. (Pumps shall be installed in a set of two pumps One working and One standby, with cascade operation). (Pumps suitable to handle solids upto 32 millimeter size with SS304. body, SS304 shaft, SS304 impeller with 15 mtrs cable, double mechanical seal). Capacity/Flow Rate - 0.55 LPS (2 M3/Hr) Head - 25.0 meter 1 Set = 2 Nos. pump (1 working+1 standby), cascade operation Approx. Elec. Load. - 0.22 KW (0.3HP) Approx. RPM -1500 MOC -SS Casing/SSImpeller/S.S. Shaft
1
-
-
PUMP ROOM SUMP PUMP
-
-
-
Supplying and erecting submersible pump set suitable for erection on open well ofrequired HP with 415 V 50 c/s.A.C. supply, having delivery head from 21 to 7 meter and discharge from 200 to 800 Itrs. per minute (Max efficiency at 16 meter head & 500 Itr discharge) & delivery pipe of necessary diameter erected with necessary H type clamps as per specification No. WP-OSP
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
Sewage Treatment Plant
-
-
-
Providing, fixing , testing and commissioning Sewage water plant : Supply, installation, testing & commissioning of 2 Nos Stainless Steel Perforated, Course & Fine Bar Screen with suitable lifting arrangement (size 1200 millimeter wide x800 millimeter high approx).( Note -size to be confirmed by bidder) Supply of MS hot dip galvanized puddle flanges in accordance to BS:10 table D as required to be provided (in the Civil WALLS) of various diameters. The installation of the puddle flanges shall be carried out by the STP contractor in accordance to the GA drawing (to be prepared by the STP contractor) at the required levels & position; under the supervision of the STP contractor. Supply of manhole step/foot rest (@ 300 millimeter c/C) with . Provision of the foot rest is envisaged in various tanks/ components of the STP for the purpose of accessibility. The installation of the foot rest shall be done by the civil contractor as per civil GA drawing Supply, installation, testing & commissioning of CI Heavy duty rectangular manhole cover with frame for the feasibility of access in the tank Supply of vent pipes of 100 millimeter dia with mosquito proof grating suitable for the ventilation purpose of the various tanks Supply, installation, testing & commissioning of non clogging type Cutter pumps capable of handling solids up to 8 to 15millimeter having CI casing & impeller complete with all accessories, motor of required capacity. Delivery header with isolation valve, NRV,pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically. Pumps shall have following duty: 'Submersible Sump Pumps (1W + 1S)( From ET to MBBR TANK) 'Flow rate (each) = 1.5 Cubic meter/hr Head = 10-12 Mtr Cost shall be inclusive of PVC flexible Hose pipe ( for piping submerged in effluent) with PVC/GI piping (for piping non-submerged in effluent) Provision of guide ropes to guide submersible pump from upper level to operational level in sump basin with channels / angle section shall be made by the STP contractor. (If Required) Contractor is requested to submit quote rate for above pumps with CI Casing & SS impeller, material of construction. 'Air diffusion system shall include the following:Twin lobe rotary air blowers capable of delivering _ Cubic meter/hr. of free air at 5_- Mts. driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply (1W +1S). Blower to be housed in an acoustically treated room such that their operating noise does not exceed 70DB at 3 mtrs. from the blower enclosure. Supply complete with valves, headers, NRVs, Base Frame etc(Vendor to fill flow rate and all necessary details based on his design.Deatil Air requirement calculation sheet need to be submitted separately along with this boq)
1
-
-
AMC
-
-
-
ANNUAL MAINTENANCE CONTRACT (AMC)-
i) FREE AMC- Contractor shall have to provide Comprehensive AMC (including providing labour & material on site) free of cost for all electromechanical systems including moving/stationary parts of equipments & machineries concurrent with the DLP for first two years.
ii) CHARGABLE AMC- Contractor shall be paid against AMC (Service charge only) for 3rd, 4th & 5th year AMC concurrent with the DLP. Contractor shall quote for the same in his offer. (Material if any shall be supplied by the PMRDA during 3rd, 4th & 5th year of AMC).
iii) Civil work related to maintainance & repair of electromechanical system shall have to be carried out by the contractor at his cost (including material, labour, transport, lifting, staging, scaffolding and any other) during both the stages of AMC during entire DLP.
-
-
-
Annual Maintanance Contract of the PHE system supplied, installed, commissioned by the contractor for 3rd,4th and 5th year in concurance with DLP.This will include Operation, routine servicing / regular maintanance, preventive maintanance of equipment and components and break down repairs as and when occured, ensuring the system does not remain out of service for a period of not more than 8 Hrs. in case of major breakdown and one Hr. in case of minor break down due to any unforeseen break down. The rate shall include for all labour, supervision ( including engineers / supervisors for round the clock as required to operate the system) and required for satisfactory operation & maintanance of the installation and system.
(Furnish separately the minimum man power supposed to be deployed along with the rates per each category)
-
-
-
For Third Year of DLP
1
-
-
For Fourth Year of DLP
1
-
-
For FifthYear of DLP
1
-
-
FIRE PUMP ROOM
-
-
-
Supplying and installing, testing, perfect aligning and proper leveling and commissioning of fire service main pump, multistage, of 2800 LPM (Litres/min.) at 105mhead centrifugal type, 120 HP, (90 kW) or of suitable HPas per specification No.FF-MFP/MSC Hydrant pump & sprinkler pump
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
Supply, installation, testing & commissioning of diesel Engine driven common stand by pump, horizontal centrifugal end suction back pull out type with gland packing and capable to deliver 2850 LPM at 100 MWC. The pump shall coupled to 120 HP of Diesel engine radiator water cooled type with speed of 1800 RPM and complete set shall be mounted on common base frame. Batteries & battery leads with stand, Fuel tank ( for 6 Hrs. operation ) with stand & gauge glass, Fuel piping with valves. The quoted rate shall includes radiator water cooling piping(if required) coupling guard and other standard accessories,RCC foundation, bellows (as recommended by manufacturer) and foundation bolts, etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
Supplying installing, testing, commissioning of Jockey Pump of 240 LPM at 105 mtr. head 3 ph. 415 A.C., 20 HP (18.5 kW) or of suitable HP with suitable Stages as per specification No. FF-MFP/JP
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
Booster Pump of 900 LPM at average 40 meter Head, 12.5 HP either Monoblock or of suitable HP with suitable Stages.
-
-
-
Terrace Floor (As the part of Eighth floor)
1
-
-
Supplying, installing, testing and commissioning of MS pipes ERW quality confirming to IS 3589, with painting, with welded joints to correct grade/alignment including cutting the pipes to correct length, providing and welding M.S. pipes jointing by means of arc welding, providing and fixing with heavy M.S. brackets/hangers anchor fastener of app. design, testing to 15 Kgs/cm2 pressure, rectifying the leakages if any, painting all complete as per specification and direction of the Engineer-in-charge for the following diameters. The quoted rate shall also include for chasing / chipping walls, making bore holes in walls / floor and making them good with filler material and finished in cement mortar etc. complete.250 millimeter dia
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
30
-
-
Supplying, installing, testing and commissioning of MS pipes ERW quality confirming to IS 3589, with painting, with welded joints to correct grade/alignment including cutting the pipes to correct length, providing and welding M.S. pipes jointing by means of arc welding, providing and fixing with heavy M.S. brackets/hangers anchor fastener of app. design, testing to 15 Kgs/cm2 pressure, rectifying the leakages if any, painting all complete as per specification and direction of the Engineer-in-charge for the following diameters. The quoted rate shall also include for chasing / chipping walls, making bore holes in walls / floor and making them good with filler material and finished in cement mortar etc. complete. 200 millimeter dia
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
30
-
-
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 150 millimeter dia with necessary fittings as per specification no.FF-PP
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
40
-
-
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 100 millimeter dia with necessary fittings as per specification no.FF-PP
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
30
-
-
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 80 millimeter dia with necessary fittings as per specification no.FF-PP
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
30
-
-
Supplying and installing double flange NRV of size 200 millimeter dia as per specification No. FF-VL/NRV
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
Supplying and installing double flange NRV of size 150 millimeter dia as per specification No. FF-VL/NRV
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
Supplying and installing double flange NRV of size 80 millimeter dia as per specification No. FF-VL/NRV
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
Supplying, Installing, testing and commissioning CI butterfly valves ( PN 16) slim seal standard lever operated type with required flanges, nuts, bolts etc. complete.
250millimeter dia
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
3
-
-
Supplying & Installing cast iron double flange butterfly valve of size 200 mmdia.as per specification No. FF-VL/BFV
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
Supplying & Installing cast iron double flange butterfly valve of size 150 mmdia.as per specification No. FF-VL/BFV
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
8
-
-
Supplying & Installing cast iron double flange butterfly valve of size 100 mmdia.as per specification No. FF-VL/BFV
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
Supplying & Installing cast iron double flange butterfly valve of size 75/80 millimeter dia. as per specification No. FF-VL/BFV
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type.( PN 16) 32 millimeter dia
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
6
-
-
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type.( PN 16) 25 millimeter dia
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
6
-
-
Supplying, installing, testing and commissioning of Flow metre( Electronic type) on Test line to measure 150 % of pump flow with suitable diameter
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
6
-
-
Supplying and installing DANFOSS make pressure switch with 12/15 millimeter Ø isolation valve, G.I. nipple, elbow etc. in an approved manner as per specification No. FF-FFA/PS
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
6
-
-
Supplying and installing pressure gauge of 100 millimeter Ø., 0-300 PSI or 0-14 Kilogram per centimeter square fitted with 12/15 millimeter Ø. Pad cock valve, and G.I. pipe, elbow etc. as per requirement in an approved manner as per specification No. FF-FFA/PG
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
6
-
-
Supplying and erecting 20/25millimeter Ø G.M.air release cock, with necessary G.I. coupling to be fitted on top of Air vessel or on wet riser as per specification No.FF-FFA/ARV
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
6
-
-
Supplying, installing and commissioning 250 millimeter dia Heavy duty C.I.flanged "Y" type Strainer with SS mesh, suitable flanges, nuts, bolts, gaskets etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
Supplying, installing and commissioning 150 millimeter dia Heavy duty C.I.flanged "Y" type Strainer with SS mesh, suitable flanges, nuts, bolts, gaskets etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
1
-
-
Supplying, installing and commissioning 100 millimeter dia Heavy duty C.I.flanged "Y" type Strainer with SS mesh, suitable flanges, nuts, bolts, gaskets etc. complete.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
Supplying, installing, testing and commissioning Exhaust pipe for Diesel engine of 150 millimeter dia M.S. Medium grade with 48 kgf/cm2 mineral wool insulation 75 millimeter thk. with aluminum sheet 22 SWG.
-
-
-
150 millimeter dia M.S. Medium grade with mineral wool insulation with aluminum Cladding.
1
-
-
150millimeter dia M.S. Medium grade shall be laid above ground with structural steel supports.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
From Ground (P01) up to First (P02) Floor
4
-
-
From First (P02) Floor up to Second (P03) Floor
4
-
-
From Second (P03) Floor up to Third (P04) Floor
4
-
-
From Third (P04) Floor up to Forth (L01) Floor
4
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
4
-
-
From Eighth (L05) Floor up to Terrace Floor
4
-
-
Terrace Floor (As the part of Eighth floor)
4
-
-
Supplying and installing Air Vessel of 300 millimeter Ø 1.5m in height M.S. tank installed inside pump house as per specification No. FF-FFA/ACT
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
Supply, erection, testing & commissioning of Precharged steel closed expansion tank 500 liter capacity with replaceable heavy duty food processed butyl rubber bladder, mounting stand with air separator & all necessary system connection & charging valve connection to facilitate on site charging complete with Pressuration & charging pumps. Tank to meet ASME Boiler & pressure vessel code. The vessel shall be 1.5 Meter high shell with dished ends at top and flat bottom with floor mounting supports including 25millimeter outlet, inlet and Branch for Pressure gauge complete. The interior of the tank surface shall be coated with suitably graded Non-Toxic epoxy coating after necessary surface treatment by sand blasting, etc. to prevent corrosion of the vessel and shall be painted externally with 3 coats of enamel paint over one coat of Zinc Chromate primer including all accessories for complete installation as required.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
HYDRANT SYSTEM
-
-
-
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 150 millimeter dia with necessary fittings as per specification no.FF-PP
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
165
-
-
From Ground (P01) up to First (P02) Floor
330
-
-
From First (P02) Floor up to Second (P03) Floor
9
-
-
From Second (P03) Floor up to Third (P04) Floor
9
-
-
From Third (P04) Floor up to Forth (L01) Floor
9
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
9
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
9
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
9
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
9
-
-
From Eighth (L05) Floor up to Terrace Floor
9
-
-
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 75/80 millimeter diawith necessary fittings as per specification No. FF-PP
-
-
-
From Ground (P01) up to First (P02) Floor
25
-
-
Terrace Floor (As the part of Eighth floor)
130
-
-
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 25 millimeter dia with necessary fittings as per specification no.FF-PP
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 150 millimeter dia with necessary fittings as per specification no.FF-PP Providing coating of Bitumen Paint & 4millimeter thick Wrapping as per IS 10221 for underground 150 millimeter Ring Main of Fire Fighting System.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
60
-
-
Supplying & Installing cast iron double flange butterfly valve of size 150 millimeter dia. as per specification No.FF-VL/BFV
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
Supplying and installing double flange NRV of size 150 millimeter dia as per specification No. FF-VL/NRV
-
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
Supplying and installing gun metal Stainless Steel Double outlet hydrant valve fitted with necessary accessories complete as per specification No. FF-VL/HV
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Terrace Floor (As the part of Eighth floor)
2
-
-
Supplying fire fighting R.R.L. Hose pipe, 63millimeter dia,15m in length, fitted with necessary accessories complete as per specification no.FF-FFA/RRL
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Terrace Floor (As the part of Eighth floor)
2
-
-
Supplying Stainless Steel branch Pipe 63 millimeter Ø fitted with 20 millimeter dia detachable hexagonal nozzle as per specifications No. FF-FFA/NZ
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Terrace Floor (As the part of Eighth floor)
2
-
-
Supplying and installing wall mounting swinging Hose reel drum fitted with 19 millimeter dia. 30mhigh pressure polypropylene (Polyhose)long fitted with necessary accessories complete as per specification No. FF-FFA/HV
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Terrace Floor (As the part of Eighth floor)
2
-
-
Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 millimeter x 736millimeter x 736 millimeter.) made from 16SWG sheet and angle iron 25 millimeter. x 25 millimeter. x 4 millimeter. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Terrace Floor (As the part of Eighth floor)
2
-
-
Supplying and installing fire brigade Header of 150 millimeter Ø, for supplying water in fire tank as per specification No. FFFA/FBC
-
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
YARD HYDRANT
-
-
-
Supplying and installing gun metal Stainless Steel single outlet hydrant valve fitted with necessary accessories complete as per specification No. FF-VL/HV
-
-
-
From Ground (P01) up to First (P02) Floor
10
-
-
Supplying fire fighting R.R.L. Hose pipe, 63millimeter dia,15m in length, fitted with necessary accessories complete as per specification no.FF-FFA/RRL (Note:2 pipes in 1 cabinet)
-
-
-
From Ground (P01) up to First (P02) Floor
20
-
-
Supplying Stainless Steel branch Pipe 63 millimeter Ø fitted with 20 millimeter dia detachable hexagonal nozzle as per specifications No. FF-FFA/NZ (Note: 2 branch pipe in 1 cabinet)
-
-
-
From Ground (P01) up to First (P02) Floor
20
-
-
M.S. Hose cabinet stand mouted type fabricated out of M.S. sheet of 16 swag. with glass fronted ( 4millimeter thick glass with rubber beeding) door and size of the cabinet shall be 600millimeter x 750 millimeter x 250 millimeter Quoted rate shall be includes suitable stand for mounting, all fasteners etc., and cabinet shall be powder coated of approved color both inside and out side.
-
-
-
From Ground (P01) up to First (P02) Floor
1
-
-
Supplying and erecting 20/25millimeter Ø G.M.air release cock, with necessary G.I. coupling to be fitted on top of Air vessel or on wet riser as per specification No.FF-FFA/ARV
-
-
-
Terrace Floor (As the part of Eighth floor)
2
-
-
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. PN 16
25 millimeter dia
-
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Terrace Floor (As the part of Eighth floor)
2
-
-
AUTOMATIC SPRINKLER SYSTEM
-
-
-
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 25 millimeter dia with necessary fittings as per specification no.FF-PP
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
230
-
-
From Ground (P01) up to First (P02) Floor
260
-
-
From First (P02) Floor up to Second (P03) Floor
345
-
-
From Second (P03) Floor up to Third (P04) Floor
345
-
-
From Third (P04) Floor up to Forth (L01) Floor
345
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
190
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
190
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
125
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
160
-
-
From Eighth (L05) Floor up to Terrace Floor
155
-
-
Supplying and erecting ISI mark G.I. pipe 32 millimeter. dia ‘C” class at position with accessories. As per specification No. CW-PLB/GP
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
60
-
-
From Ground (P01) up to First (P02) Floor
80
-
-
From First (P02) Floor up to Second (P03) Floor
105
-
-
From Second (P03) Floor up to Third (P04) Floor
125
-
-
From Third (P04) Floor up to Forth (L01) Floor
125
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
130
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
90
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
135
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
95
-
-
From Eighth (L05) Floor up to Terrace Floor
110
-
-
Supplying and erecting ISI mark G.I. pipe 40 millimeter. dia ‘C” class at position with accessories. As per specification No. CW-PLB/GP
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
75
-
-
From Ground (P01) up to First (P02) Floor
60
-
-
From First (P02) Floor up to Second (P03) Floor
60
-
-
From Second (P03) Floor up to Third (P04) Floor
160
-
-
From Third (P04) Floor up to Forth (L01) Floor
160
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
160
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
105
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
150
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
155
-
-
From Eighth (L05) Floor up to Terrace Floor
150
-
-
Supplying and erecting ISI mark G.I. pipe 50 millimeter. dia ‘C” class position with accessories. As per specification No. CWPLB/ GP
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
10
-
-
From Ground (P01) up to First (P02) Floor
10
-
-
From First (P02) Floor up to Second (P03) Floor
15
-
-
From Second (P03) Floor up to Third (P04) Floor
20
-
-
From Third (P04) Floor up to Forth (L01) Floor
20
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
105
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
125
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
90
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
50
-
-
From Eighth (L05) Floor up to Terrace Floor
95
-
-
Supplying and erecting ISI mark G.I. pipe 65 millimeter. dia ‘C” class position with accessories. As per specification No. CWPLB/ GP
-
-
-
From Ground (P01) up to First (P02) Floor
35
-
-
From First (P02) Floor up to Second (P03) Floor
20
-
-
From Second (P03) Floor up to Third (P04) Floor
15
-
-
From Third (P04) Floor up to Forth (L01) Floor
15
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
55
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
50
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
35
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
30
-
-
From Eighth (L05) Floor up to Terrace Floor
50
-
-
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 75/80 millimeter diawith necessary fittings as per specification No. FF-PP
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
183
-
-
From Ground (P01) up to First (P02) Floor
98
-
-
From First (P02) Floor up to Second (P03) Floor
43
-
-
From Second (P03) Floor up to Third (P04) Floor
38
-
-
From Third (P04) Floor up to Forth (L01) Floor
38
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
68
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
73
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
68
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
58
-
-
From Eighth (L05) Floor up to Terrace Floor
48
-
-
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 100 millimeter diawith necessary fittings as per specification no. FF-PP
-
-
-
From First (P02) Floor up to Second (P03) Floor
35
-
-
From Second (P03) Floor up to Third (P04) Floor
50
-
-
From Third (P04) Floor up to Forth (L01) Floor
50
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
30
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
40
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
40
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
55
-
-
From Eighth (L05) Floor up to Terrace Floor
35
-
-
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 150 millimeter dia with necessary fittings as per specification no.FF-PP
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
264
-
-
From Ground (P01) up to First (P02) Floor
10
-
-
From First (P02) Floor up to Second (P03) Floor
10
-
-
From Second (P03) Floor up to Third (P04) Floor
10
-
-
From Third (P04) Floor up to Forth (L01) Floor
10
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
45
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
45
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
35
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
55
-
-
From Eighth (L05) Floor up to Terrace Floor
45
-
-
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. PN 16 25 millimeter diameter
-
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Terrace Floor (As the part of Eighth floor)
2
-
-
Supplying & Installing cast iron double flange butterfly valve of size 150 millimeter dia. as per specification No.FF-VL/BFV
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
3
-
-
Supplying and erecting 15 millimeter (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction as per specification No. FF-SPR
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
112
-
-
From Ground (P01) up to First (P02) Floor
133
-
-
From First (P02) Floor up to Second (P03) Floor
157
-
-
From Second (P03) Floor up to Third (P04) Floor
198
-
-
From Third (P04) Floor up to Forth (L01) Floor
198
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
176
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
184
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
203
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
211
-
-
From Eighth (L05) Floor up to Terrace Floor
141
-
-
Supplying and erecting 15 millimeter (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction as per specification No. FF-SPR Upright sprinkler with temperature rating 68/78 deg C
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
176
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
184
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
203
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
211
-
-
From Eighth (L05) Floor up to Terrace Floor
141
-
-
Supplying, installing, testing and commissioning quick response Sprinkler quartzoid bulb type with 15millimeter screwed end connection of 95 deg. C. temperature rating,K 80 and orifice shall not be less than 6millimeter.Sprinklers shall be UL Listed / FM approved with Chrome finished.
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1
-
-
From Eighth (L05) Floor up to Terrace Floor
1
-
-
Supplying, installing, testing and commissioning of hydraulically operated Sprinkler control valve, with water motor gong bell and trims as required, pressure gauges, drain valves, ball valves, check valves, strainers etc. complete. Alarm valve shall be UL Listed / FM approved. 150 millimeter diameter
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
3
-
-
Supplying, installing, testing and commissioning flow switch Assembly including pressure switch, butterfly valve , orifice plate with flange ,Drain valve, test valve, sight flow indicator etc. complete on sprinkler distribution header on each floor and shall be connected to fire alarm panel through cable. Cable shall be measured separately.
150 millimeter diameter
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Supplying, installing, testing and commissioning flow switch Assembly including pressure switch, butterfly valve , orifice plate with flange ,Drain valve, test valve, sight flow indicator etc. complete on sprinkler distribution header on each floor and shall be connected to fire alarm panel through cable. Cable shall be measured separately.
100 millimeter diameter
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
Supplying, installing, testing and commissioning flow switch Assembly including pressure switch, butterfly valve , orifice plate with flange ,Drain valve, test valve, sight flow indicator etc. complete on sprinkler distribution header on each floor and shall be connected to fire alarm panel through cable. Cable shall be measured separately.
80 millimeter diameter
-
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
Supply & fixing of approved type rosette plates ( Recessed type, in two piece) for Sprinklers below false ceiling area. The Rosette shall be fabricated by M.S. plate of 2millimeter thick and the finish shall be powder coated and color shall be as approved by architects / clients.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
112
-
-
From Ground (P01) up to First (P02) Floor
133
-
-
From First (P02) Floor up to Second (P03) Floor
157
-
-
From Second (P03) Floor up to Third (P04) Floor
198
-
-
From Third (P04) Floor up to Forth (L01) Floor
198
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
176
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
184
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
203
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
211
-
-
From Eighth (L05) Floor up to Terrace Floor
141
-
-
Stainless steel corrugated flexible pipe(hose) for dropping sprinklers below false ceiling, pipe shall be 16 bar pressure rating , 25/15 millimeter dia with union / reducer collar, clamps etc. as required.
1200 millimeter long
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
112
-
-
From Ground (P01) up to First (P02) Floor
133
-
-
From First (P02) Floor up to Second (P03) Floor
157
-
-
From Second (P03) Floor up to Third (P04) Floor
198
-
-
From Third (P04) Floor up to Forth (L01) Floor
198
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
176
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
184
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
203
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
211
-
-
From Eighth (L05) Floor up to Terrace Floor
141
-
-
Supplying and erecting 20/25millimeter Ø G.M.air release cock, with necessary G.I. coupling to be fitted on top of Air vessel or on wet riser as per specification No.FF-FFA/ARV
-
-
-
Terrace Floor (As the part of Eighth floor)
4
-
-
FIRE SEALANT
-
-
-
Fire sealing of Through Penetrations, with small to large size cut outs, in Floor (Mixed shafts) Providing Fire stop mortar system Hilti CP 636 , with minimum 2 hours fire rating when tested in accordance with UL 1479 standards, for horizontal openings in floors or slabs after passing service lines like Metal Pipes, Plastic Pipes, Metal Ducts etc. The mortar shall be a light weight cementitious product and shall carry test certificate in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. Hilti CP 606 acrylic firestop sealant, with minimum 2 hours fire rating when tested in accordance with UL 1479 standards, shall be used along the periphery of ducts & chiller pipes without insulation. Hilti FS One intumescent firestop sealant,with minimum 2 hours fire rating when tested in accordance with UL 1479 standards, shall be used along the periphery of chiller pipes and ducts with insulation. Hilti intumescent sealants FS One (for plastic pipe diameter = 2''), Intumescent Wraps CP 648-E (for plastic pipe diameter 2'' & = 6'') & Intumescent Collars CP 644 (for plastic pipe diameter 6'' & = 10'') should be used around Plastic Pipes or Conduits to provide minimum 2 hours fire rating when tested in accordance with UL 1479 standards. The products shall be age tested as per Dafstb and DIBT standards. The products shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96. The products shall be UL listed & classified and shall bear the UL logo on the packing. Firestop installation should be done by Hilti trained applicators and in accordance with Hilti guidelines.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
From Ground (P01) up to First (P02) Floor
4
-
-
From First (P02) Floor up to Second (P03) Floor
4
-
-
From Second (P03) Floor up to Third (P04) Floor
4
-
-
From Third (P04) Floor up to Forth (L01) Floor
4
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
4
-
-
From Eighth (L05) Floor up to Terrace Floor
4
-
-
Providing and fixing Fire resistant Mineral Wool Board system with minimum 2 hours fire rating when tested in accordance with BS 476 part 20 for vertical openings in walls after passing service lines like electrical cables trays, metal pipes, Plastic Pipes, ducts etc. The system shall comprise of a mineral wool board coated with an ablative coating at 0.7millimeter dft. on both sides, mineral wool board shall be of min.160 Kilogram/m3 density, all contact surfaces and cavities shall be sealed with a joint filler, intumescent sealants and intumescent wraps, The product shall be age tested for as per Dafstb and DIBT standards, carry test certificate for mold resistance rating of 0 (zero) as determined by ASTM G21-96. Fire paint & Sealants shall be UL listed & classified and shall bear the UL and FM approval logo on the packing. Firestop installation should be done by the trained applicators and in accordance with manufacturer's guidelines/specifications as directed by the Engineer-in-charge. Fire resistant Mineral Wool Board system, with ablative coating manufactured by Hilti or approved equivalent.
-
-
-
GI PIPE diameter of 2'' (FS One Firestop Sealant) - For Floor & Wall
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
110
-
-
From Ground (P01) up to First (P02) Floor
110
-
-
From First (P02) Floor up to Second (P03) Floor
110
-
-
From Second (P03) Floor up to Third (P04) Floor
110
-
-
From Third (P04) Floor up to Forth (L01) Floor
110
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
110
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
110
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
110
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
110
-
-
From Eighth (L05) Floor up to Terrace Floor
110
-
-
GI Pipe diameter of 2.5'' (CP 648-E Firestop Wrap), minimum hole dia. in wall/floor shall be 92 millimeter - For beam
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
18
-
-
From Ground (P01) up to First (P02) Floor
18
-
-
From First (P02) Floor up to Second (P03) Floor
18
-
-
From Second (P03) Floor up to Third (P04) Floor
18
-
-
From Third (P04) Floor up to Forth (L01) Floor
18
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
18
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
18
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
18
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
18
-
-
From Eighth (L05) Floor up to Terrace Floor
18
-
-
Terrace Floor (As the part of Eighth floor)
18
-
-
Plastic Pipe diameter of 3'' (CP 648-E Firestop Wrap), minimum hole dia. in wall/floor shall be 112 millimeter - For Beams
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
12
-
-
From Ground (P01) up to First (P02) Floor
12
-
-
From First (P02) Floor up to Second (P03) Floor
12
-
-
From Second (P03) Floor up to Third (P04) Floor
12
-
-
From Third (P04) Floor up to Forth (L01) Floor
12
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
12
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
12
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
12
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
12
-
-
From Eighth (L05) Floor up to Terrace Floor
12
-
-
Plastic Pipe diameter of 4'' (CP 648-E Firestop Wrap), minimum hole dia. in wall/floor shall be 132 millimeter -For Floors
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
Plastic Pipe diameter of 6'' (CP 648-E Firestop Wrap), minimum hole dia. in wall/floor shall be 202 millimeter - For Beams
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
FIRE EXTINGUISHERS
-
-
-
Carbon-di- oxide type fire extinguisher of 2 kgs. Capacity, CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wall mounting bracket etc. complete, confirming to IS: 2878. (Electrical Room & Lift Room)
-
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
1
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
1
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
1
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
1
-
-
From Eighth (L05) Floor up to Terrace Floor
1
-
-
ABC Powder type extinguisher of 5 Kgs. Capacity and 2 fire buckets filled with clean, dry, fine sand in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wall mounting bracket etc. complete, confirming to IS: 2878. in the parking areas @ 100 Square mt each .
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
13
-
-
From Ground (P01) up to First (P02) Floor
13
-
-
From First (P02) Floor up to Second (P03) Floor
13
-
-
From Second (P03) Floor up to Third (P04) Floor
13
-
-
From Third (P04) Floor up to Forth (L01) Floor
13
-
-
ABC Powder type extinguisher of 5 Kgs. Capacity and 2 fire buckets filled with clean, dry, fine sand in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wall mounting bracket etc. complete, confirming to IS: 2878. near each staircase landing on every floor.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From Ground (P01) up to First (P02) Floor
2
-
-
From First (P02) Floor up to Second (P03) Floor
2
-
-
From Second (P03) Floor up to Third (P04) Floor
2
-
-
From Third (P04) Floor up to Forth (L01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
ABC Powder type extinguisher of 5 Kgs. Capacity and 2 fire buckets filled with clean, dry, fine sand in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wall mounting bracket etc. complete, confirming to IS: 2878. .(Transformer room & Generator Area, panel room)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
Fire buckets round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.(Panel room, transformer, DG etc.) (1 STAND 2 BUCKETS & EACH CORPORATE FLOOR 2 STAND)
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
4
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
4
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
4
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
4
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
4
-
-
From Eighth (L05) Floor up to Terrace Floor
4
-
-
Fire bucket stand fabricated by MS angles to install 2 Nos. of buckets.
-
-
-
From Lower Ground Floor up to Ground (P01) Floor
2
-
-
From Forth (L01) Floor up to Fifth (L02) Floor
2
-
-
From Fifth (L02) Floor up to Sixth (L03) Floor
2
-
-
From Sixth (L03) Floor up to Seventh (L04) Floor
2
-
-
From Seventh (L04) Floor up to Eighth (L05) Floor
2
-
-
From Eighth (L05) Floor up to Terrace Floor
2
-
-
AMC
-
-
-
ANNUAL MAINTENANCE CONTRACT (AMC)-
i) FREE AMC- Contractor shall have to provide Comprehensive AMC (including providing labour & material on site) free of cost for all electromechanical systems including moving/stationary parts of equipments & machineries concurrent with the DLP for first two years.
ii) CHARGABLE AMC- Contractor shall be paid against AMC (Service charge only) for 3rd, 4th & 5th year AMC concurrent with the DLP. Contractor shall quote for the same in his offer. (Material if any shall be supplied by the PMRDA during 3rd, 4th & 5th year of AMC).
iii) Civil work related to maintainance & repair of electromechanical system shall have to be carried out by the contractor at his cost (including material, labour, transport, lifting, staging, scaffolding and any other) during both the stages of AMC during entire DLP.
-
-
-
Annual Maintanance Contract of the FIRE FIGHTING system supplied, installed, commissioned by the contractor for 3rd,4th and 5th year in concurance with DLP.This will include Operation, routine servicing / regular maintanance, preventive maintanance of equipment and components and break down repairs as and when occured, ensuring the system does not remain out of service for a period of not more than 8 Hrs. in case of major breakdown and one Hr. in case of minor break down due to any unforeseen break down. The rate shall include for all labour, supervision ( including engineers / supervisors for round the clock as required to operate the system) and required for satisfactory operation & maintanance of the installation and system.
(Furnish separately the minimum man power supposed to be deployed along with the rates per each category)
-
-
-
For Third Year of DLP
1
-
-
For Fourth Year of DLP
1
-
-
For FifthYear of DLP
1
-
-
HT SYSTEM
-
-
-
HT CABLE
-
-
-
Supplying , erecting & terminating 3 x 300 Square millimeter 22 kV,XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No.CB-HT
250
-
-
Providing and erecting Heat shrinkable indoor termination kit for 22 kV ( E ) XLPE HT cable 3x240 to 400 Square millimeter.with necessary material as per specification No. CB-JT/HT
2
-
-
Providing and erecting Heat shrinkable outdoor termination kit for 22 kV ( E ) XLPE HT cable 3x240 to 400 Square millimeter. with necessary material as per specification No.CB-JT/HT
4
-
-
Providing and erecting Heat shrinkable Straight through joint kit for 22 kV ( E ) XLPE HT cable 3x300 to 400 Square millimeter with necessary material as per specification No. CBJT/HT
1
-
-
EARTHING SYSTEM (Maintenance free)
-
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
1
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter GI Earthing Rod of Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
1
-
-
Supplying and laying earthing conductors of Copper strips with PVC sleeves / GI strips including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice Prices should include all supports, accessories and hardware necessary for proper installation.
-
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required. As per specification No EA-EP.
40
-
-
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required.As per specification NoEA-EP.
40
-
-
Supply and laying, installation of following RCC (NP-2 class) Hume pipe however all fixing accessories, excavation, back filling, sand & brick bedding etc. shall be included in the scope. This shall also include cost of required size chambers.
-
-
-
Supplying & laying (including excavation)15 centimeter dia RCC Hume pipe with coupling collar of standard thickness at required depth up to 90 centimeter below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).
50
-
-
Supplying & laying (including excavation) 25 centimeter dia RCC Hume pipe of standard thickness at required depth up to 90 Centimeter below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).
155
-
-
Constructing chamber 1000 millimeter x 1000 millimeter (clear internal dimension ) in 200 millimeter thick brick masonry in cement mortar 1:6 , over a bed of 150 millimeter thick M-15 cement concrete foundation having 150 millimeter offset from all outer finished surfaces of the chamber, haunches & benching and Coping in cement concrete of grade M-15, cement plaster 1:4, 20 millimeter thick on inside & outside, inside finished smooth with a floating coat of neat cement, cement plaster 12 millimeter thick in cement mortar 1:4 on top & sides of coping & on the bed,and finishing smooth etc. all complete as per the specification and as directed.
Depth of chamber upto 1.2m depth
13
-
-
Supplying precast fibre reinforced concrete Perforated covers for electrical chambers, approved by Engineer-in-charge of approved make, tested to ultimate load as per IS 1726 ( part-I ) ( latest revision ) including transporting, placing in position etc. complete as per specifications and as directed. Heavy duty perforated covers of approximate size 1000 x 1000 millimeter
13
-
-
Constructing chamber 1000 millimeter x 1000 millimeter (clear internal dimension ) in 200 millimeter thick brick masonry in cement mortar 1:6 , over a bed of 150 millimeter thick M-15 cement concrete foundation having 150 millimeter offset from all outer finished surfaces of the chamber, haunches & benching and Coping in cement concrete of grade M-15, cement plaster 1:4, 20 millimeter thick on inside & outside, inside finished smooth with a floating coat of neat cement, cement plaster 12 millimeter thick in cement mortar 1:4 on top & sides of coping & on the bed,and finishing smooth etc. all complete as per the specification and as directed.
Depth of chamber upto 0.750m depth
2
-
-
Supplying precast fibre reinforced concrete Perforated covers for electrical chambers, approved by Engineer-in-charge of approved make, tested to ultimate load as per IS 1726 ( part-I ) ( latest revision ) including transporting, placing in position etc. complete as per specifications and as directed.
Heavy duty perforated covers of approximate size 1000 x 1000 millimeter
2
-
-
Constructing chamber 750 millimeter x 750 millimeter (clear internal dimension ) in 200 millimeter thick brick masonry in cement mortar 1:6 , over a bed of 150 millimeter thick M-15 cement concrete foundation having 150 millimeter offset from all outer finished surfaces of the chamber, haunches & benching and Coping in cement concrete of grade M-15, cement plaster 1:4, 20 millimeter thick on inside & outside, inside finished smooth with a floating coat of neat cement, cement plaster 12 millimeter thick in cement mortar 1:4 on top & sides of coping & on the bed,and finishing smooth etc. all complete as per the specification and as directed.
Depth of chamber upto 0.450m depth
6
-
-
Supplying precast fibre reinforced concrete Perforated covers for electrical chambers, approved by Engineer-in-charge of approved make, tested to ultimate load as per IS 1726 ( part-I ) ( latest revision ) including transporting, placing in position etc. complete as per specifications and as directed.
Heavy duty perforated covers of approximate size 750 x 750 millimeter x 50millimeter thick with lifting arrangement including laying of angle iron frame of angle size as 50 x 50 x6 millimeter to be fixed / embedded on top of chamber
6
-
-
22KV RING MAIN UNIT PANEL
-
-
-
Supply.Installation,Testing,Commissioning of 22KV,630Amps,25KA outdoor type(IP65) ring main gear panel as per below specification.
Supplying & erecting 22 kV 630A, Indoor type Ring Main unit with 1or 2 Incoming & 2 or 1 Outgoing with HRC fuses complete erected on provided c c foundation/MS channels/trench, etc, in an approved manner as per specification no SW-HTS / RMU
1
-
-
EARTHING SYSTEM (Maintenance Free)
-
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
1
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter GI Earthing Rod of Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
1
-
-
Supplying and laying earthing conductors of Copper strips with PVC sleeves / GI strips including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice Prices should include all supports, accessories and hardware necessary for proper installation.
-
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required. As per specification No EA-EP.
100
-
-
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required.As per specification NoEA-EP.
100
-
-
COMPACT SUBSTATION
-
-
-
Supply,Installation,Testing and Commissioning of 22KV/0.430 KV, 1000 KVA, Dyn11, INDOOR, DRY Type, with ON LOAD TAP CHANGER TRANSFORMER
Supplying and Erecting approved make Compact Substation with 1000 kVA,3 phase, 50 c/s AN Type UNIPACK 21KA for 3 Sec. SF6 insulated Non-Extinsible Compact switchgear (Type DV-NE) consisting of one No. Direct Cable madule and One No. Fixed Manual Vacuum Circuit Breaker in SF6 insulated stainless steel enclosure,with series trip, self powered microprocessor based numerical over current relay (IDMTL + Inst.) protection. Interconnection between HT switchgear and transformer shall be using 1Cx3x200 Squaremillimeter Al. unarmorured XLPE Cable.1000 kVA,3 phase,50 c/s, Referrance Standard IS 11171 & IEC 60076-11,Vaccum Cast Coil (VCC) Dry Type Cast Resin Transformer, Copper wound , Dyn11 Vector Group,with delta connection on HV side & star connection on LV side with additional neutral brought out on load side,For Indoor Use Continuous Duty, Average Temp rise of Winding ( at Principal Tap) 115 Deg C at Ambient Temp Max 50 Deg C & Min -5 Deg C at full load rating, Voltage rating 22/ 0.433 kV with OLTC Tapping on Transformer For +5 to - 5% @ 2.5% in +2/-2 Steps, HV Variation, Class of Insulation H/H, Method of cooling AN, No Load Loss at Rated Voltage & Frequency (+15% IS Tol) 3.20 KW, Full Load Loss at Rated Current 9.30 KW, with 98.77 % Efficiency at Full Load & 98.91 % at 1/2 Full Load, with 125 KV peak Full Wave Lightning Impulse withstand Voltage with Complete Enclosure having IP 54 Degree of protection, Cable Box arrangement at HV side & Busduct at LV side ,with rating & Diagram Plate, Base Channel, Lifting Lugs, Earthing Terminals & WTI Scanner with 3 PT-100 Sensors,etc. standard accessories complete with Test Certificate (as per IS:11171) as per specification No SSTR.with necessary permission of Electrical Inspector.LV PANEL-1600 AMPS ALUMINUM BUSBAR ( 100% for Phase and 50% for Neutral, Current Density - 1amp/sqmillimeter) with Outgoings 1600Amps 433V 4P 50Hz 50KA ICOG Fixed Manual Type Air Circuit Breaker (ACB) with Microprocessor based release for Overload , short circuit & earth Fault protection,Multifunctional Meter with Class 1.0Accuracy with RS 485 Port, RYB, ON/OFF Trip Indications, OUTDOOR ENCLOSURE having IP54 IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for Transformer compartment, Powder /Colour Coated Enclosure,with Interconnection Between HT switchgear & Transformer using 1Cx3x200 Square.millimeter XLPE Aluminium Single core cable.Interconnection between Transformer & LT switchgear using Al. Busbars. Internal earthing connections by using 50x6 millimeter GI Strips including Transformer Neutral, Complete as per specification No SS- TR/COMP with necessary permission of Electrical Inspector
1
-
-
EARTHING SYSTEM (Maintenance free)
-
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
2
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter GI Earthing Rod of Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
2
-
-
Supplying and laying earthing conductors of strips with PVC sleeves / GI strips including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice Prices should include all supports, accessories and hardware necessary for proper installation.
-
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required. As per specification No EA-EP.
100
-
-
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required.As per specification NoEA-EP.
100
-
-
SUBSTATION AUXILLARIES
-
-
-
Supplying and erecting enamel iron G.I. sheet 1.6millimeter (16 gauge) caution board of size 250 x 200 millimeter.as per I.S. 2551 of 1982 in Marathi and Hindi erected at position for EHV installation.
10
-
-
Providing printed instruction chartfor treating persons suffering from electric shock, printed in English & Marathi and duly laminated.
2
-
-
Providing Round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook.
4
-
-
Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500millimeter in length, 900millimeter in height frame made out of 30x30x4 millimeter angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint.
1
-
-
Supplying and fixing PVC Synthetic elastomer electrically insulating mat with class C insulation conforming to IS:15652 – 2006 & CPRI tested having 3millimeter thickness upto 33kV.
20
-
-
Supplyingshock proof leather Safety Shoes of Electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacturer.
2
-
-
Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 Kilogram capacity with necessary clamp for erection on wall.
7
-
-
Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage,gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal use, scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes)
4
-
-
Providing pair of duly tested rubber hand gloves as per IS :4770 suitable for working upto 22kV supply.
4
-
-
Supply,Installation, Testing and Commissioning of 22 KV metering Kiosk along with CTs and PTs as required and approved by UTILITY CO. This shall include Electricity Board approved trivector meter.
Supplying, erecting, testing, commissioning 22 KV H.T.metering cubical (Compact Type) approved by MSEDCL/Licensee fabricated with 2millimeter.(14 SWG) M.S.sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25x6 millimeter electronic security lock and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover ( C.T.P.T COVER) interlock with meter doors, epoxy coated 3 nos C.T having required ratio between 5/5A to 25/5A, VA10,Class0.5S,22000/V3/110/V3 VA 50, class 0.5 epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc complete duly tested by Licensee with necessary Test Certificates and erected on provided plinth/ C.C foundation.
1
-
-
EARTHING SYSTEM (Maintenance free)
-
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
4
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter GI Earthing Rod of Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
5
-
-
Supplying and laying earthing conductors of strips with PVC sleeves / GI strips including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice Prices should include all supports, accessories and hardware necessary for proper installation.
-
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required. As per specification No EA-EP.
400
-
-
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required.As per specification NoEA-EP.
500
-
-
Exhaust/Fresh Air fans as per requirement.
-
-
-
Supplying and erecting Exhaust fan heavy duty 230 V A.C.50 cycles 450 millimeter. 1400 RPM complete erected in position as per specifcation no. FG-FN/EXF
6
-
-
The professional charges for liasoning work and departmental procedures required for the above said work .
The work shall include the following:
* Complete Liaoning with Electricity Board and electrical inspectorate.
* Obtaining the feasibility report and spot inspection, etc.
* Obtaining sanction of H.T. connection of 1no. 1000 KVA Transformer.
* Preparation and submission of all statutory drawings to MSEDCL and electrical inspectorate.
* Obtaining necessary approvals and submitting to the clients.
* Any other works related to MSEDCL and Electrical inspectorate.
1
-
-
VOLTAGE STABILIZER
-
-
-
Supply, Installation, Testing and Commissioning of 1000 kVA, 3 Phase, 50 Hz,Indoor duty, Dry Type type Voltage Stabilizer with input volatge range 360 - 460 V and output Voltage 415 V +- 1 %, all the standard accessories as required by the local electricity boards.with Input MCCB, Output CONTACTOR and Bypass Switch to bypass the Stabilizer Incase of Emergency Suitable for Indoor Application.
Termination arrangements-
Primary Side - Provision for 5 runs of 240 Square.millimeter XLPE Cable.
LV Side - Provision for 5 runs of 240 Square.millimeter XLPE Cable.
Note: Scope shall also include testing and inspection at works by the Electricity Board officials / Client / MC / Consultants
1
-
-
EARTHING SYSTEM (Maintenance free)
-
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
1
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter GI Earthing Rod of Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
1
-
-
Supplying and laying earthing conductors of Copper strips with PVC sleeves / GI strips including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice Prices should include all supports, accessories and hardware necessary for proper installation.
-
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required. As per specification No EA-EP.
100
-
-
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required.As per specification NoEA-EP.
100
-
-
DG SYSTEM
-
-
-
500 KVA Diesel Generator (Radiator Type)
-
-
-
Supply, Installation, testing and commissioning of 500 KVA Prime power rated Diesel Generator Set complete with Diesel Engine suitable for Generator application, developing 1500RPM with an overloading capacity of 10% for one hour in any 12 continuous hours operation coupled to 500 KVA at 0.85 Power factor, 415V, 3 Phase , 4 wires, 50 Hz. self excited, self regulated and brushless excitation. DG set shall be radiator type with residential silencer, electronic governor, termination box, MS mounting frame, fuel piping, 990 liters diesel day tank, 24VDC Battery Charger & batteries, Battery mounting frame, oil level indicator with gauge board, The DG Set shall be suitable for auto-mains failure start, auto synchronization, auto load sharing and auto / manual operations. The cost shall include fuel oil required for testing DG Set at full load.
Supplying, Erecting and Commissioning of Diesel generating set with alternator of 500 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled /liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours,alongwith standard accessories, self-excited, self-regulated,screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising of meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 meter, provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG
2
-
-
DG Fuel Storage
-
-
-
Supply, installation and commissioning of 990 lit. M.S 3millimeter tank with necessary: i) supporting structure with 2# coats Red oxide & 1# coat of finish ii) oil level indicator(Level switches)
iii) valve inlet & drains connection
iv) overflow & vent connection
v)automatic diesel pumping from tank to DG.
2
-
-
Supply and installation in position the following GI class ‘C’ pipes cut to required lengths and installed with all welded joints and painted. Providing and fixing in position the necessary fittings like elbows, tees and reducers, sockets, supports and accessories including digging and refilling earth where required for buried pipes. 20 millimeter dia GI pipes
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 20 millimeter dia with necessary fittings as per specification No. FF-PP
40
-
-
DG Synchronizing Panel as per schematic
-
-
-
Design, Assembling, Supply, Installation, Testing and Commissioning of following AMF and Auto Synchronizing Panel suitable for synchronizing 2 nos. 500 KVA ,415 Volts, 3 phase 4 wire, 50 Hz DG Sets in conjunction with general specifications as per schematic.Supplying, erecting, testing and commissioning of Microprocessor based Generator Control Unit (Synchronization panel) panel suitable for Diesel Generating Set of 500 kVA capacity Three phase, 415 Volts, 50Hz A.C.with all standard features and safeties etc as per specification no. GEN-SYNC.
1
-
-
LT Cable
-
-
-
Supplying, erecting & terminating PVC armoured cable 3½core 240 Square mmaluminium conductor with continuous 12.97 Square millimeter (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/pipe as per specification no. CB-LT/AL
415
-
-
Supplying, erecting & terminating PVC armoured cable 3 core 2.5 Square millimeter copper conductorcontinuous 5.48 Square millimeter (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
45
-
-
Supplying, erecting & terminating PVC armoured cable 4 core 4 Square millimeter copper conductor continuous 5.48 Square millimeter (12 SWG) G.I. earth wire complete erected with glands & lugs,on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (Cu Armoured Control Cable)
40
-
-
Earthing (Maintenance free)
-
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rodof Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
4
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter GI Earthing Rod of Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
4
-
-
Supplying and laying earthing conductors of strips including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice. Prices should include all supports, accessories and hardware necessary for proper installation.
-
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required. As per specification No EA-EP.
80
-
-
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required.As per specification NoEA-EP.
192
-
-
Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws in an approved manner.
25
-
-
Supplying and erecting G. I. Earth Wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.
25
-
-
DG Exhaust
-
-
-
Supply, Installing, Testing and Commissioning exhaust piping complete with MS exhaust pipe, pipe accessories like flanges, bends, elbows, rain protection hoods, etc.. The exhaust piping shall be fixed from floor with MS angle supports, using necessary clamps, anchor bolts, vibration isolation pads, etc. The prices should include all such accessories.
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 200 millimeter dia with necessary fittings as per specification no.FF-PP
-
-
-
Exhaust pipe 250millimeter dia 5 millimeter thick with all necessary fittings.
50
-
-
Exhaust pipe 400millimeter dia 5 millimeter thick with all necessary fittings.
175
-
-
Acoustic & Insulations Supplying and insulating of following sizes of DG Exhaust pipes with 150 millimeter mineral wool insulation wrapped in chicken mesh and wrapped with aluminium cladding of 26 gauge.
-
-
-
Exhaust pipe 250millimeter diameter
50
-
-
Exhaust pipe 400millimeter diameter
175
-
-
LT SYSTEM
-
-
-
THYRISTOR BASED APFC PANELS WITH HARMONIC FILTER
-
-
-
Design, Assembling, Supply, Installation, Testing and Commissioning of following 450 KVAR Thyristor based Auto Power Factor Correction Panel operated with AUTO as well as MANUAL and Switchgears suitable for 415 Volts, 3 phase 4 wire, 50 Hz power distribution system. In conjunction with general specifications following points should also be considered and adhered to.
1) All the Switchboards shall be Indoor type, dust and vermin proof type compartmentalised design maintaining IP 54 degree of protection.
2) Panels shall be free standing floor mounted.
3) All hinged door shall be earthed through 2.5 Square millimeter tinned copper wire. Doors shall be pad locking type whereas for MCCB compartments they should be open able only in switch OFF mode.
4) All the bus bars and links shall be of copper with colour coded heat shrinkable insulating sleeves. Separate earth bus bars shall be provided along the length of the switchboards.
5) All measuring instruments (Meters) shall be of digital electronic with LED display of approved make and compatible with IBMS / BAS.
6) Adequate additional sets of C.T.s, potential free contacts, connectors, contactors with wiring etc are to be provided for IBMS including space required for various transducers.
7) Adequate space for cable entries and terminations shall be provided referring SLDs. Cable entries can be either from the top or bottom as required.
8) All panel switches with locking arrangement.
9) All types of switches,db mcb's require lockout mechanism
450 KVAR THYRISTOR BASED APFC PANEL
-
-
-
Incomer
One(1) No 800 Amps, 415 Volts, 50 KA, TP,MDO, ACB releases for Short Circuit, Earth fault and Over Current protection along with adjustable setting. Each breaker shall be fitted vertical with following accessories, complete as required.
1 Nos. 96 x 96 Squaremillimeter 0-800/ 1 amps CTR digital ammeter with 1 Nos. 800 / 5 amps, 15 VA Class I CT’s.
0-500 Volts, size 96 millimeter x 96 millimeter digital voltmeter with selector switch and protected by 2 amp TP MCB’s Current
Voltage
Frequency / Harmonics
Instantaneous power factor
Total active energy (KWH/MWH)
Maximum demand (KVA/MVA) (KW/MW)
Maximum demand reset count.
Breaker control switch
Eight time of a day energy.
RS 485 Port as required for IBMS/BAS.
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
Breaker indicating lamps for CB open, CB close, CB auto trip, Trip circuit healthy etc.
Under voltage relay with timer Over voltage relay with timer
-
-
-
Relay
Microprocessor based APFC controller along with continuously monitor all three phases and displays various Electrical Parameters like voltage, input current, capacitive current, KVA demand,KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232C / 485 port as required. Controller should mounted on the front side of the panel.
Capacitors
Combination of Banks forming a 450 KVAr with mixed dielectric or MPP type dielectric medium.Capacitor banks shall be connected through appropriate sized MCCBs. Banks should be selected such that power factor should be close to unity.
Switching System
Switching System shall be through high speed response thyristors with a response time less than 60 mill seconds. This should be complete with required firing cards.
1
-
-
LT PANEL
-
-
-
Design, Assembling, Supply, Installation, Testing and Commissioning of following LV Switchboards and Switchgears suitable for 415 Volts, 3 phase 4 wire, 50 Hz power distribution system. In conjunction with general specifications following points should also be considered and adhered to.
1) All the Switchboards shall be Indoor type, dust and vermin proof type compartmentalised design maintaining IP 54 degree of protection.
2) Switchboards shall be free standing floor mounted or wall mounted as required.
3) All the Switchboards shall be of compartmentalised with entire fabrication in 14 Gauge Sheet Steel and Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.
4) All hinged door shall be earthed through 2.5 Square millimeter tinned copper wire. Doors shall be pad locking type whereas for MCCB compartments they should be open able only in switch OFF mode.
5) All the bus bars and links shall be of Al/Copper with colour coded heat shrinkable insulating sleeves. Separate earth bus bars shall be provided along the length of the switchboards.
6) All measuring instruments (Meters) shall be of digital electronic with LED display of approved make and compatible with IBMS / BAS.
7) Adequate additional sets of C.T.s, potential free contacts, connectors, contactors with wiring etc are to be provided for IBMS including space required for various transducers.
8) Adequate space for cable entries and terminations shall be provided referring SLDs. Cable entries can be either from the top or bottom as required.
9) All panel switches with locking arrangement.
Note:- For the purpose of panel boards rates shall be inclusive of work along with angle iron work.
-
-
-
MAIN LT PANEL (Incomers with electically operated interlock)
-
-
-
Incoming
Supplying and erecting Air circuit breaker manually electrically operated drawout type of 1600A, 500V, 3 pole having S.C. rating 50 kA (Ics=Icu=Icw for 1s),with standard acccessories on provided iron frame.
2
-
-
Supplying, installation& marking of Surge arrestor/ Surge Protection Device at the main distribution board after the incoming breaker of Type 1+2 conforming to IEC 61643- II tested for Imax 50 kA for Three Phase & Neutral as per specification no. CP-SPD
2
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs.
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
4
-
-
Supplying & erecting Intelligent flush mounted panel meter with three phase four wire (IPM) input voltage measurement range 50-550 VAC,Aux supply 90-300 VAC /DC.CT secondary site selectable 1A/5A, flush mounting 96x96 millimeter,CT/PT site programmable,flush mounting (96x96millimeter) meter constant Wh viewing in LCD Multifunction meter in auto scroll mode with voltage,current,frequency,power factor KW,,kva,Kvar,kwh,kvah,kvarh,phase angle,interrupts,THD,events neutral current,with LED display complete with RS 485 communication protocol,class I accuracy,and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.
2
-
-
0 -1600 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.1600 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1600A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
2
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
2
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
4
-
-
Bus Bars -
2000 Amps, 415 Volts, TPN,50 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chamber / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
Note:- Nut, bolts holding the lugs to bus bar shall be of bimetallic/brass/cadmium plated steel.
30
-
-
Outgoing Feeder
-
-
-
Providing & erecting 3 Pole MCCB upto 63A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame.
4
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
4
-
-
Providing & erecting 3 Pole MCCB of 160A,415V capacity with S.C. rating 36 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron /G.I. frame.
2
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting 3 Pole MCCB of 250A,415V capacity with S.C. rating 36 kA (Ics=100% of Icu),thermal and magnetic setting with provided leads on iron /G.I.frame as per specification No. SW-SWR/MCCB
5
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
5
-
-
Providing & erecting 3 Pole MCCB of 315/400A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu),thermal and magnetic setting with provided leads on iron/G.I. frame as per specification No. SW-SWR/MCCB
1
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting 3 Pole MCCB of 315/400A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu),thermaland magnetic setting with provided leads on iron/G.I. frameas per specification No. SW-SWR/MCCB
1
-
-
Providing & erecting 3 Pole MCCB of 800A, 415V capacity with S.C. rating 36 kA , thermal and magnetic setting withprovided leads on iron/G.I. frame as per specification No.SW-SWR/MCCB
2
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
280
-
-
Note:- For the purpose of panel boards above rates shall be inclusive of work along with angle iron work.
-
-
-
ELEVATOR POWER PANEL
-
-
-
Incoming
160 Amps, 415 Volts, TPN, 25 KA, MCCB, with thermal & magnetic releases for O/C, S/C,U/V O/V, E/F protections.
Providing & erecting 3 Pole MCCB of 200A,415V capacity with S.C. rating 25 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron /G.I. frame as per specification no. SW-SWR/MCCB
1
-
-
Supplying & erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In) and adjustable time delay 100/200 milisecond suitable for 200A MCCB.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -160 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.160 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars - 200 Amps, 415 Volts, TPN,25 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
3
-
-
Outgoing Feeder
-
-
-
63 A TPN MCCB with ON,OFF TRIP indication
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
8
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
8
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
100
-
-
Note:- For the purpose of panel boards above rates shall be inclusive of work along with angle iron work.
-
-
-
TYPICAL LIFT PANEL
-
-
-
Incoming
Providing & erecting 3 Pole MCCB upto 63A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame.
6
-
-
Supplying & erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In) and adjustable time delay 100/200 milisecond suitable for 200A MCCB.
6
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
12
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
6
-
-
0 -63 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.63 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
6
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
6
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
12
-
-
Bus Bars - 100 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
2
-
-
Outgoing Feeder
-
-
-
Supplying, erecting & marking FP MCB 40A to 63A in provided distribution board as per specification No. SWSWR/MCB
12
-
-
Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 40A. 4 pole complete as per specification No. SW-RCCB/RCCB
12
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
12
-
-
Supplying, erecting & marking SP MCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
12
-
-
Providing, erecting & commissioning RCCBonly of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A. 2 pole complete as per specification No. SW-RCCB/RCCB
12
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
12
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
50
-
-
FIRE EMERGENCY POWER PANEL
-
-
-
Incoming Supplying and erecting approved make ON LOAD Four Pole Automatic Transfer Switchsuitable for415V, 50 Hz,320Acapacity conforming to IEC: 60947-1 & IEC: 947-6-1/ IS: 13947-1, with Enclosure, automatic/manual inbuilt Time delay, high transfer speed, excellent breaking capacity, superior making capacity, compact & light weight, erected on provided angle iron / G.I. frame and connected with provided leads.
1
-
-
Providing & erecting 3 Pole MCCB of 250A,415V capacity with S.C. rating 36 kA (Ics=100% of Icu),thermal and magnetic setting with provided leads on iron /G.I.frame as per specification No. SW-SWR/MCCB
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In) and adjustable time delay 100/200 millisecond suitable for above 200A upto 400A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -250 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.250 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
320 Amps, 415 Volts, TPN,36 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
8
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
4
-
-
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
2
-
-
Providing & erecting 3 Pole MCCB of 200A,415V capacity with S.C. rating 25 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron /G.I. frame as per specification no. SW-SWR/MCCB
2
-
-
Providing & erecting 3 Pole MCCB of 250A,415V capacity with S.C. rating 36 kA (Ics=100% of Icu),thermal and magnetic setting with provided leads on iron /G.I.frame as per specification No. SW-SWR/MCCB
1
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
9
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
125
-
-
MAIN POWER PANEL
-
-
-
Incoming Providing & erecting 3 Pole MCCB of 315/400A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu),thermal and magnetic setting with provided leads on iron/G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In) and adjustable time delay 100/200 millisecond suitable for above 200A upto 400A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -320 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.320 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
400 Amps, 415 Volts, TPN,36 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
10
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
8
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
8
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
100
-
-
POWER PANEL-PODIUM FLOOR
-
-
-
Incoming Providing & erecting 3 Pole MCCB upto 125A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -125 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.125 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars - 125 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
5
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
8
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
8
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
50
-
-
POWER PANEL-LEVEL-1
-
-
-
Incoming
Providing & erecting 3 Pole MCCB upto 125A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -125 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.125 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
125 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
5
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
4
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
4
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
50
-
-
POWER PANEL-LEVEL-2
-
-
-
Incoming
Providing & erecting 3 Pole MCCB upto 125A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -125 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.125 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars - 125 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
5
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
5
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
5
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
50
-
-
POWER PANEL-LEVEL-3
-
-
-
Incoming Providing & erecting 3 Pole MCCB upto 125A, 415Vcapacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -125 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.125 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
125 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
5
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
5
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
5
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
50
-
-
POWER PANEL-LEVEL-4
-
-
-
Incoming
Providing & erecting 3 Pole MCCB upto 125A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -125 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.125 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
125 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
5
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
5
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
5
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
50
-
-
POWER PANEL-LEVEL-5
-
-
-
Incoming
Providing & erecting 3 Pole MCCB upto 125A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -125 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.125 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
125 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
5
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
5
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
5
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
50
-
-
MAIN LIGHTING PANEL
-
-
-
Incoming
Providing & erecting 3 Pole MCCB of 160A,415V capacity with S.C. rating 36 kA (Ics=100% of Icu),thermal and magnetic setting with provided leads on iron /G.I.frame as per specification No. SW-SWR/MCCB
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -160 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.160 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
200 Amps, 415 Volts, TPN,36 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
5
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
8
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
8
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
50
-
-
LIGHTING PANEL-PODIUM FLOOR
-
-
-
Incoming
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -100 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.100 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
125 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
3
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
7
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
7
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
40
-
-
LIGHTING PANEL-LEVEL-1
-
-
-
Incoming
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs.
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -100 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.100 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
125 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
3
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
5
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
5
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
40
-
-
LIGHTING PANEL-LEVEL-2
-
-
-
Incoming
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per
specification No. SW-SWR/MCCB
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -100 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.100 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars - 125 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
3
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
5
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
5
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
40
-
-
LIGHTING PANEL-LEVEL-3
-
-
-
Incoming
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs.
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -100 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.100 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
125 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
3
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
5
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
5
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
40
-
-
LIGHTING PANEL-LEVEL-4
-
-
-
Incoming
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs.
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -100 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.100 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
125 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
3
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
5
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
5
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
40
-
-
LIGHTING PANEL-LEVEL-5
-
-
-
Incoming
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -100 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.100 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
125 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
3
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
7
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
7
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
40
-
-
MAIN EMERGENCY LIGHTING PANEL (Parallel Operation On UPS)
-
-
-
Incoming Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
2
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
4
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
2
-
-
0 -125 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.125 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
2
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
2
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
125 Amps, 415 Volts, TPN,25 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.(with double neutral) Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
3
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
6
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No. SW-SWR/MCB
3
-
-
Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
5
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
14
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
40
-
-
MAIN UPS POWER PANEL
-
-
-
Incoming Providing & erecting 3 Pole MCCB of 250A,415V capacity with S.C. rating 36 kA (Ics=100% of Icu),thermal and magnetic setting with provided leads on iron /G.I.frame as per specification No. SW-SWR/MCCB
2
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In) and adjustable time delay 100/200 millisecond suitable for above 200A upto 400A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following:
R, Y & B Phase indicating lamps protected by 2 Amps MCBs.
ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
4
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
2
-
-
0 -250 Amps, 96 x 96 Squaremillimeter digital ammeter with 3 Nos.250 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
2
-
-
0 - 500 Volts, 96 x 96 Squaremillimeter digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
2
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
320 Amps, 415 Volts, TPN,36 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.(with double neutral)
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
8
-
-
Outgoing Feeder with ON,OFF TRIP Indication
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
18
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
18
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
100
-
-
BREAKERS IN ENCLOSURE
-
-
-
Supplying & erecting CRCA sheet metal one way enclosures suitable for D.P.M.C.B/T.P.M.C.B/F.P.M.C.B.complete erected on angle iron /G.I frame
18
-
-
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
14
-
-
Providing & erecting 3 Pole MCCB of 250A,415V capacity with S.C. rating 36 kA (Ics=100% of Icu),thermal and magnetic setting with provided leads on iron /G.I.frame as per specification No. SW-SWR/MCCB
4
-
-
LT CABLING SYSTEM
-
-
-
Supplying, erecting & terminating PVC armoured cable 3½core 240 Square millimeter aluminium conductor with continuous 12.97 Square millimeter (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/pipe as per specification no. CB-LT/AL
575
-
-
Supplying, erecting & terminating PVC armouredcable 1100 V. 3½ core 185 Square millimeter aluminium conductor with continuous 12.97 Square millimeter (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
145
-
-
Supplying, erecting & terminating PVC armoured cable 3½core 95 Square millimeter aluminium conductor with continuous 8.35 Square millimeter (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/pipe as per specification no. CB-LT/AL
20
-
-
Supplying, erecting & terminating PVC armoured cable 3½core 70 Square mm aluminium conductor with continuous 8.35 Square millimeter (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/pipe as per specification no. CB-LT/AL
10
-
-
Supplying, erecting & terminating PVC armouredcable 3½core 50 Square millimeter aluminium conductor with continuous 5.48 Square millimeter (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/pipe as per specification no. CB-LT/AL
225
-
-
Supplying, erecting & terminating PVC armoured cable 3½core 35 Square millimeter aluminium conductor with continuous 5.48 Square millimeter (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/pipe as per specification no. CB-LT/AL
50
-
-
Supplying, erecting & terminating PVC armouredcable 3½core 25 Square millimeter aluminium conductor with continuous 5.48sq millimeter (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/pipe as per specification no. CB-LT/AL
1125
-
-
Supplying, erecting & terminating PVC armoured cable 4 core 16 Square millimeter copper conductor with continuous 5.48 Square millimeter (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
150
-
-
Supplying, erecting & terminating PVC armouredcable 4 core 10 Square millimeter copper conductor continuous 5.48 Square millimeter (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
1000
-
-
Supplying, erecting & terminating PVC armouredcable 4 core 6 Square millimeter copper conductor continuous 5.48 Square millimeter (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per
specification no.CB-LT/CU
525
-
-
Supplying, erecting & terminating PVC armoured cable 4 core 4 Square millimeter copper conductorcontinuous 5.48 Square millimeter (12 SWG) G.I. earth wire complete erected with glands & lugs,on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
575
-
-
Supplying, erecting & terminating PVC armoured cable 3 core 2.5 Square millimeter copper conductorcontinuous 5.48 Square millimeter (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
3000
-
-
Supplying, erecting & terminating PVC armoured cable 3 core 2.5 Square millimeter copper conductorcontinuous 5.48 Square millimeter (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU-(for external area Light)
1500
-
-
Supplying, erecting & terminating PVC armoured cable 4 core 2.5 Square millimeter copper conductorcontinuous 5.48 Square millimeter (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
20
-
-
Supplying, erecting & terminating PVC Unarmoured cable 1 core 16 Square millimeter copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CB-LT/CU
125
-
-
Supplying, erecting & terminating PVC Unarmoured cable 1 core 25 Square millimeter copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CB-LT/CU
100
-
-
Supplying, erecting & terminating PVC Unarmoured cable 1 core 70 Square millimeter copper conductor complete erected with provided lugs, laid in provided control panel/distribution boards / pipe as per specification no.CB-LT/CU
275
-
-
Supplying, erecting & terminating PVC Unarmoured cable 1 core 185 Square millimeter copper conductor complete erected with provided lugs, laid in provided control panel/distribution boards / pipe as per specification no.CB-LT/CU
100
-
-
CABLE TRAY
-
-
-
Providing & erecting Hot dipped Galvanised Ladder type Cable tray manufactured from 16 swg (1.6 millimeter thick) GI sheet of 500 millimeter width & 100 millimeter height comprising all required standard accessories.
50
-
-
Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 millimeter thick) GI sheet of 150 millimeter width & 75 millimeter height complete with necessary coupler plates & hardware in approved manner.
350
-
-
Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 millimeter thick) GI sheet of200 millimeter width & 75 millimeter height complete with necessary coupler plates & hardware in approved manner.
1500
-
-
Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 millimeter thick) GI sheet of 300 millimeter width & 75 millimeter height complete with necessary coupler plates & hardware in approved manner.
475
-
-
Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 millimeter thick) GI sheet of 500 millimeter width & 75 millimeter height complete with necessary coupler plates & hardware in approved manner.
200
-
-
Note:- 1) Standard accessories shall typically include :
a) 'Z' section support -30 x 35 millimeter in size - 312 millimeter in length - 6 nos. support for one piece ladder of 2.5 meter in length each.
b) Anchor fastner & nut bolts of adequate size - 16 nos.( 2 nos. per support)
c) Coupler plates with hardware - 70 x 200 x 3 millimeter thick - 2 nos. for each piece of 2.5 meter Ladder complete with neccesory accessories such as Reducer, Horizontal Elbow & Tee, Up & Down Vertical Elbow & bend, Cross Piece complete erected in approved manner.
2) Provision for resting arrangement or support for perforated type Cable tray shall be made separetly as per iron work Item
3) Provision of cover for perforated type Cable tray shall be made only where it is absolutely necessary and make sure for locking arrangement.
4) Both type of cable tray shall be earthed properly.
-
-
-
RACEWAYS/TRUNCKING.
-
-
-
Supply & Installation of GI Raceway with,
1) Raceway including cover.
2) All Bends,T-Joint,Junction Box
-
-
-
50x40 millimeter
3500
-
-
100x40 millimeter
400
-
-
200x40 millimeter
225
-
-
300x40 millimeter
250
-
-
400x40 millimeter
250
-
-
DISTRIBUTION BOARDS
-
-
-
Supply, Installation, Testing and Commissioning of the following Distribution Boards fabricated in sheet steel with phase copper bus bars, neutral and earth bar with tapped holes, cut-outs for operating the MCB knobs in the inner cover, Bakelite phase barriers, double door construction, powder coated with approved shade and partitions to segregate phases etc. DB's shall be suitable for single phase/3 phase operation. DB's shall be flush mounted to brick wall or surface mounted as required.IP43
-
-
-
12 Way TPN DB Lighting Distribution Board comprising of Incomer :
i) 40 Amp TPN MCB
ii) 3# 25Amp DP RCCB+MCB(30 mA)
Outgoing :i)24# 10 Amp SPMCB
Supplying & erecting triple pole and neutral distribution board (TPN DB) with door surface/ flush mounted SPMCB of 12 ways/phase (36 Poles)on iron/ G.I. frame/wooden board.(Horizontal Busbar type) as per specification no. SWSWR/MCBDB
26
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
26
-
-
Supplying, erecting & marking DPMCB 6 A to 32 A Bseries (for lighting) in provided distribution board as per specification no. SW-SWR/MCB
78
-
-
Providing, erecting & commissioning RCCBonly of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A. 2 pole complete as per specification No. SW-RCCB/RCCB
78
-
-
Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB
624
-
-
12 Way TPN DB Power Distribution Board comprising of Incomer :
i) 63 Amp TPN MCB
iii) 3# 32Amp DP RCCB+MCB(100 mA)
Outgoing :i)24# 16 Amp SPMCB
Supplying & erecting triple pole and neutral distribution board (TPN DB) with door surface/ flush mounted SPMCB of 12 ways/phase (36 Poles)on iron/ G.I. frame/wooden board.(Horizontal Busbar type) as per specification no. SWSWR/MCBDB
29
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
29
-
-
Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
87
-
-
Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 40A2 pole complete as per specification No. SW-RCCB/RCCB
87
-
-
Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
696
-
-
12 Way SPN DB Power Distribution Board comprising of Incomer :
iii) 25Amp DP RCCB+MCB(30 mA)
Outgoing :
i)8 #10 Amp SPMCB
Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 10 ways for outgoingSP MCB’s on iron/ G.I.frame/wooden board as per specification No. SWSWR/MCBDB
5
-
-
Supplying, erecting & marking DPMCB 6 A to 32 A Bseries (for lighting) in provided distribution board as per specification no. SW-SWR/MCB
10
-
-
Providing, erecting & commissioning RCCBonly of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A. 2 pole complete as per specification No. SW-RCCB/RCCB
10
-
-
Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB
40
-
-
POINT WIRING
-
-
-
One light controlled by one switch
Point wiring for light/fan/bell /exhaust fan Hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 millimeter PVC conduit /casing n caping with 1.5 Squaremillimeter. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW
262
-
-
Two light controlled by one switch Point wiring for light/fan/bell /exhaust fan Hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 millimeter PVC conduit /casing n caping with 1.5 Squaremillimeter. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW
303
-
-
Secondary Point wiring for additional light/ Bell point,concealed type in min 20 millimeter PVC conduit with 1.5 Squaremillimeter.(2+1E) FR/FRLS grade copper wires with required accessories as per specification No: WG-PW/CW
303
-
-
One ex fan controlled by one switch Point wiring forlight/fan/bell /exhaust fan Hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 millimeter PVC conduit /casing n caping with 1.5 Squaremillimeter. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW
35
-
-
Note:- 1) For point wiring above 6 meters of length, add 10 % of overall rate of point wiring for every additional 1 meter length or part thereof.
2) Point wiring starts from Main board/Intermediate switch board and suitable circuit mains are to be provided from D.B. to first board and between boards.
3) For point wiring in stair case with 2 way control point increase overall rate by 50 % of light point wiring.
4) For wiring on stone wall add Rs 15.00 per point wiring. 5) For covering at wall entries acrylic sheet of appropriate size shall be provided. (Refer Item No. 6-1-9)
6) For concealed type wiring multistrand wires shall be used preferably.
7) Earth Wire of minimum 1.5 Square millimeter Shall be terminated in each point8) For point wiring in FRLSH wire add 2% Over Point wiring with FRLS Wire overall rate.
-
-
-
Supply,Installation,Testing,Commissioning of following switch sockets with all accessories.
One 6 A Socket controlled by one 6 A Switch.(Half Points)
-
-
-
Supplying and erecting modular type switch6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.
223
-
-
Supplying and erecting modular type 3 pin 6A multi socket with safety shutterISI mark approved make duly erected on provided plate and box with wiring connections complete.
223
-
-
One 6 A Socket controlled by one 6 A Switch.
-
-
-
Supplying and erecting modular type switch6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.
1352
-
-
Supplying and erecting modular type 3 pin 6A multi socket with safety shutterISI mark approved make duly erected on provided plate and box with wiring connections complete.
1352
-
-
One 6/16 A Socket controlled by one 16 A Switch.
-
-
-
Supplying and erecting modulartype switchone way 16 / 20 A, ISI mark, approved make duly erected on provided plate and box with wiring connections complete with neon indicator.
202
-
-
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.
202
-
-
MODULAR BOX
-
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 moduleduly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.
377
-
-
Supplying and erecting unbreakable concealed type modular switch boxwith double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.
476
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.
1
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.
21
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.
358
-
-
Supplying and erecting unbreakable concealed type modular switch boxwith double mounting plate for 12 moduleduly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.
307
-
-
WORKSTATION AREA
-
-
-
Supply, installation, testing and commissioning of work station as per described below complete with:
'General office work station complete with:
'i) 2# 6A socket + 1# 16A switch
-
-
-
Supplying and erecting modular type 3 pin 6A multi socket with safety shutterISI mark approved make duly erected on provided plate and box with wiring connections complete.
1334
-
-
Supplying and erecting modulartype switch16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.
334
-
-
Submains Wiring
-
-
-
Supplying & erecting mains with 2x2.5 Squaremillimeter.and earth wire 1.5 Squaremillimeter FRLS PVC copper wire in rigid PVC conduit min. 20millimeter dia. as per specification No: WGMA/PC, para no. 1.4.1
11300
-
-
Supplying & erecting mains with 3x2.5 Squaremillimeter F.R. L.S copper PVC insulated wirelaid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
20700
-
-
Supplying & erecting mains with 2x4 Squaremillimeter.and earth wire 2.5 Squaremillimeter FRLS PVC copper wire in rigid PVC conduit min.20millimeter dia,as per specification No:WG-MA/PC, para no.1.4.1
3500
-
-
LIGHTING FIXTURES
-
-
-
INDOOR AREA LIGHT
-
-
-
18 W LED Downligt
-
-
-
Supplying and erecting LED square / circular 16 to 20W downlighter having pressure die-cast aluminium housing,opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.
1250
-
-
12 W LED Downlight
-
-
-
Supplying and erecting LED square / circular 13 to 15W downlighterhaving pressure die-cast aluminum housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.
282
-
-
Supply,Installation,Testing and commissioning of Ceiling mount Auto Light Switch with motion & lux sensor, adjustable off delay timer.
30
-
-
Supply,Installation,Testing and commissioning of Ceiling mount Auto Light ocupancy with sensor, adjustable off delay timer.
115
-
-
18 W Tube Light-T5
-
-
-
Supplying and erecting T5 24 W Energy Efficient fluorescent tube.
158
-
-
Supplying and erectingelectronic ballast, pf 0.9 or Transformer suitable for T5 lamp upto 28 W as per specification No. FG-FG/AS1
158
-
-
Supplying &erecting decorative pre-wired box type fitting/batten suitable for 4' T8 LED tube light (Excluding tube light).
158
-
-
Supplying and erecting ISI mark Ceiling rose / Batten holder / Slanting holder /hanging cord switch / hanging bell push /pendent holder bakelite base 6A.erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished double wooden block/ ISI mark PVC junction box.
44
-
-
2 X 2 feet 32 Watt mirror Optic LED Light Fixture
-
-
-
Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED Panel light (slim edge-lit) 600X600millimeter suitable for 36 W-40W with provisionfor plane front frame with translucent cover fixed to the housing complete
510
-
-
LED Strip Light
-
-
-
Supplying and erecting LED flexible strip light 5m length upto 25Wconforming IP 65 of any colour with driver complete.
2250
-
-
Note:- 1) System efficacy shall not be less than 85 lumens/watt,
2) CRI shall be more than 70.
3) Total Harmonic Distortion Voltage and Current shall be less than 15%
4) Operating range shall be 140V to 270V
5) Power Factor of Luminaire shall be more than 0.95
6) Luminaire and Lamp shall be LM79,LM80 compliant respectively
7) Luminaire shall conform respective IS.
8) Luminaire Shall withstand surge protection upto 4 kV
9) Luminaire shall carry minimum three years warranty.
10) Color temperature shall be as requires between 4000K-6500K.
-
-
-
OUTDOOR AREA LIGHT
-
-
-
Supplying and erectingLED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete per specification No . FG-ODF/FLS2
20
-
-
Providing & erecting 5 meter high (clear height) galvanised OCTAGONAL pole with foundation bolts having bottom of 130 millimeter A/F, top 70 millimeter A/F on provided foundation as per specification No.OH-PL/OPL.
20
-
-
Supplying and erecting Street light bracket made from 25 millimeter. dia ‘B’class G.I. Pipe, 0.6m. in lengthalong with pole cap of 300 millimeter length and 80 millimeter dia duly welded with provided leads as per specification no.FG-BKT/BPC
20
-
-
Supplying & erecting integral post top lantern fixtures (light house type)suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification no. FG-ODF/PTL (NEW)
8
-
-
Providing & erecting 5 meter high (clear height) galvanised OCTAGONAL pole with foundation bolts having bottom of 130 millimeter A/F, top 70 millimeter A/F on provided foundation as per specification No.OH-PL/OPL.
8
-
-
Supplying and erecting Cylindrical shaped Integral decorative with high power 9W LED bollardwith opal acrylic diffuser and IP65 protection on provided foundation.(NEW) upto 1000MM
20
-
-
Supplying and erecting LED Flood light fitting of 30-40W, including lamp, with PF 0.95,class IP 65 and above class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete per specification No FG-ODF/FLS-2
10
-
-
Supplying and erectingRecess mounted 30W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete.( Including Compatible Driver)
20
-
-
supplying& erecting 20W LED PAR (30 Lamp E-27 Base,SPOTO series) lights by making necessary arrangement/recess in wall to make it flush with surface.
10
-
-
Supplying and erecting Programmable Digital Almanac Timer Microcontroller based with real time clock to operate on derived switching “ON” & switching “OFF” street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display,relay output 230V / 10A with 10 Hrs battery backup and manual over drive facility capable to drive different capacity contactors timer erected in MS box in an approved manner.
1
-
-
MAINTENANCE FREE EARTHING
-
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rodof Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
3
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter GI Earthing Rod of Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
3
-
-
Supplying and laying earthing conductors of Copper / GI strips including necessary accessories, clamping to walls, cables etc.as required and interconnection between lengths as per specifications and as per good installation practice. Prices should include all supports, accessories and hardware necessary for proper installation.
-
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non corrosive bonding an approved manner with joints required. As per specification No EA-EP.
2000
-
-
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bonding an approved manner with joints required.As per specification NoEA-EP.
3760
-
-
Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws in an approved manner.
100
-
-
Supplying and erecting G. I. Earth Wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.
100
-
-
LIGHTNING ARRESTER
-
-
-
Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 millimeter dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.
10
-
-
EARTHING
-
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rodof Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
2
-
-
Supplying and laying earthing conductors of CU strips including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice. Prices should include all supports, accessories and hardware necessary for proper installation.
-
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required. As per specification No EA-EP.
600
-
-
LIFT SYSTEM
-
-
-
Hoist way maintenance Lighting and Power for LIFT-1,2,3,4,5,6 including supply & installation of I) 1# 6/16A Switch Socket per Floor ii)1# 60w Bulkhead Light Fixture iii)1# 6A switch to control Bulkhead Light Fixture
-
-
-
Supplying and erecting flush type shockproof plug socket 6A.& 16A (6 pin) with 16A switch combined with indicator lamp and fuse with gang box on wooden board.
66
-
-
Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall. As per specification no.FGIDF/BHF
66
-
-
EARTHING
-
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rodof Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
12
-
-
Supplying and laying earthing conductors of CU strips including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice. Prices should include all supports, accessories and hardware necessary for proper installation.
-
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required. As per specification No EA-EP.
2268
-
-
ON LINE UPS SYSTEM
-
-
-
Supply,Installation, testing and commissioning of following type of ON LINE UPS as per drawings and specifications with all other accessories
-
-
-
3-PHASE INPUT- 3-PHASE OUTPUT ON LINE UPS
-
-
-
150 KVA/---VDC True-On-Line UPS System using microchip controlled IGBT based design Maintenance free batteries for 30 minutes battery backup.
Battery Rack
2
-
-
Supplying and erecting 12 V/200AH TUBULAR Battery with battery terminal wire, duly charged complete with 36 months warranty complete
56
-
-
3-PHASE INPUT- 3-PHASE OUTPUT ON LINE UPS
-
-
-
20 KVA/---VDC True-On-Line UPS System using microchip controlled IGBT based design Maintenance free batteries for 30 minutes battery backup.
Battery Rack
4
-
-
Supplying and erecting 12 V/200AH TUBULAR Battery with battery terminal wire, duly charged complete with 36 months warranty complete
20
-
-
3-PHASE INPUT- 3-PHASE OUTPUT INVERTER
-
-
-
2 KVA/---VDC True-On-Line UPS System using microchip controlled IGBT based design Maintenance free batteries for 30 minutes battery backup.Battery Rack
(Supplying, installing, testing & commissioning of 2500 VA Digital pure sine wave inverter based on IGBT technology three phase 415V,50 Hz complete as per specification no.AP-INV (Without batteries)
1
-
-
Supplying and erecting 12 V/80AH TUBULAR Batterywith battery terminal wire, duly charged complete with 36 months warranty complete
2
-
-
EARTHING
-
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rodof Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
10
-
-
Supplying and laying earthing conductors of CU strips including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice. Prices should include all supports, accessories and hardware necessary for proper installation.
-
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non corrosive bondin an approved manner with joints required. As per specification No EA-EP.
1280
-
-
Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws in an approved manner.
25
-
-
PV SOLAR SYSTEM
-
-
-
Supplying, Installing,Testing and commissioning of 10 KWp capacity On-Grid Solar Power Pack with GI mounting structure and inter connecting wires / cables without battery bank SPV Modules of 10 KWp, Solar power Conditioning unit of min. 10 KVA capacity complete. With 5 years on site performance warranty as per Specification no ESD-RT-ONG
6
-
-
EARTHING
-
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 millimeter diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rodof Length 3m along with 25 Kilogram Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
2
-
-
Supplying and laying earthing conductors of CU strips including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice. Prices should include all supports, accessories and hardware necessary for proper installation.
-
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non corrosive bonding an approved manner with joints required. As per specification No EA-EP.
700
-
-
Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws in an approved manner.
40
-
-
HVAC SYSTEM
-
-
-
L.T PANEL
-
-
-
Design, Assembling, Supply, Installation, Testing and Commissioning of following LV Switchboards and Switchgears suitable for 415 Volts, 3 phase 4 wire, 50 Hz power distribution system. In conjunction with general specifications following points should also be considered and adhered to.
1) All the Switchboards shall be Indoor type, dust and vermin proof type compartmentalised design maintaining IP 54 degree of protection.
2) Switchboards shall be free standing floor mounted or wall mounted as required.
3) All the Switchboards shall be of compartmentalised with entire fabrication in 14 Gauge Sheet Steel and Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.
4) All hinged door shall be earthed through 2.5 Square millimeter tinned copper wire. Doors shall be pad locking type whereas for MCCB compartments they should be open able only in switch OFF mode.
5) All the bus bars and links shall be of Al/Copper with colour coded heat shrinkable insulating sleeves. Separate earth bus bars shall be provided along the length of the switchboards.
6) All measuring instruments (Meters) shall be of digital electronic with LED display of approved make and compatible with IBMS / BAS.
7) Adequate additional sets of C.T.s, potential free contacts, connectors, contactors with wiring etc are to be provided for IBMS including space required for various transducers.
8) Adequate space for cable entries and terminations shall be provided referring SLDs. Cable entries can be either from the top or bottom as required.
9) All panel switches with locking arrangement.
10) Nut, bolts holding the lugs to bus bar shall be of bimetallic/brass/cadmium plated steel.
11) For the purpose of panel boards above rates shall be inclusive of work along with angle iron work.
-
-
-
MAIN AC POWER PANEL
-
-
-
Incoming-
Providing & erecting 3 pole MCCB of 800A,415V capacity with S.C rating 36 KA,thermal & magnetic setting with provided leads on iron/G.I frame as per specification no SW-SWR/MCCB.
1
-
-
Supplying & erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In) and adjustable time delay 100/200 milisecond suitable for 400A upto 800A MCCB.
1
-
-
Panel compartment shall be fitted with following: R, Y & B Phase indicating lamps protected by 2 Amps MCBs. ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Supplying & erecting Intelligent flush mounted panel meter with three phase four wire (IPM) input voltage measurement range 50-550 VAC,Aux supply 90-300 VAC /DC.CT secondary site selectable 1A/5A, flush mounting 96x96 mm,CT/PT site programmable,flush mounting (96x96mm) meter constant Wh viewing in LCD Multifunction meter in auto scroll mode with voltage,current,frequency,power factor KW,,kva,Kvar,kwh,kvah,kvarh,phase angle,interrupts,THD,events neutral current,with LED display complete with RS 485 communication protocol,class I accuracy,and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.
1
-
-
0 -800 Amps, 96 x 96 sq.mm digital ammeter with 3 Nos.800 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 sq.mm digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
1000 Amps, 415 Volts, TPN,36 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle
type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
15
-
-
Outgoing Feeder with ON,OFF TRIP indication
-
-
-
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermalsetting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
2
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting 3 Pole MCCB of 200A,415V capacity with S.C. rating 25 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron /G.I. frame as per specification no. SW-SWR/MCCB
3
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
3
-
-
Providing & erecting 3 Pole MCCB of 200A,415V capacity with S.C. rating 25 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron /G.I. frame as per specification no. SW-SWR/MCCB
3
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
3
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
125
-
-
AC PANEL-LEVEL 1
-
-
-
Incoming-
Providing & erecting 3 Pole MCCB of 160A,415V capacity with S.C. rating 16 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron /G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following: R, Y & B Phase indicating lamps protected by 2 Amps MCBs. ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -160 Amps, 96 x 96 sq.mm digital ammeter with 3 Nos.160 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 sq.mm digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
200 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
8
-
-
Outgoing Feeder with ON,OFF TRIP indication
-
-
-
Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
29
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
2
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
4
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
4
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
50
-
-
AC PANEL-LEVEL 2
-
-
-
Incoming-
Providing & erecting 3 Pole MCCB of 160A,415V capacity with S.C. rating 16 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron /G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following: R, Y & B Phase indicating lamps protected by 2 Amps MCBs. ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -160 Amps, 96 x 96 sq.mm digital ammeter with 3 Nos.160 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 sq.mm digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
200 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle
type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
8
-
-
Outgoing Feeder with ON,OFF TRIP indication
-
-
-
Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
51
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
6
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
6
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
50
-
-
AC PANEL-LEVEL 3
-
-
-
Incoming-
Providing & erecting 3 Pole MCCB of 200A,415V capacity with S.C. rating 16 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron /G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following: R, Y & B Phase indicating lamps protected by 2 Amps MCBs. ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -200 Amps, 96 x 96 sq.mm digital ammeter with 3 Nos.200 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 sq.mm digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
250 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle
type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
8
-
-
Outgoing Feeder with ON,OFF TRIP indication
-
-
-
Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
57
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
6
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
6
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
50
-
-
AC PANEL-LEVEL 4
-
-
-
Incoming-
Providing & erecting 3 Pole MCCB of 200A,415V capacity with S.C. rating 16 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron /G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following: R, Y & B Phase indicating lamps protected by 2 Amps MCBs. ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -200 Amps, 96 x 96 sq.mm digital ammeter with 3 Nos.200 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 sq.mm digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
250 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle
type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
8
-
-
Outgoing Feeder with ON,OFF TRIP indication
-
-
-
Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
68
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
6
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
6
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
50
-
-
AC PANEL-LEVEL 5
-
-
-
Incoming-
Providing & erecting 3 Pole MCCB of 160A,415V capacity with S.C. rating 16 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron /G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following: R, Y & B Phase indicating lamps protected by 2 Amps MCBs. ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -160 Amps, 96 x 96 sq.mm digital ammeter with 3 Nos.160 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 sq.mm digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
200 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle
type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
8
-
-
Outgoing Feeder with ON,OFF TRIP indication
-
-
-
Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
68
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
7
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
7
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
40
-
-
FREASH AIR FAN PANEL
-
-
-
Incoming-
Providing & erecting 3 Pole MCCB upto 16A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following: R, Y & B Phase indicating lamps protected by 2 Amps MCBs. ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -63 Amps, 96 x 96 sq.mm digital ammeter with 3 Nos.63 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 sq.mm digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
100 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle
type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
3
-
-
Outgoing Feeder with ON,OFF TRIP indication
-
-
-
Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
23
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
40
-
-
FIRE SMOKE EXTRACTION PANEL
-
-
-
Incoming-
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following: R, Y & B Phase indicating lamps protected by 2 Amps MCBs. ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -63 Amps, 96 x 96 sq.mm digital ammeter with 3 Nos.63 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 sq.mm digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
100 Amps, 415 Volts, TPN,25 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle
type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
3
-
-
Outgoing Feeder with ON indication (MCB+OVERLOAD RELAY)
-
-
-
Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
11
-
-
Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.(Similar to Minilec -D2 MPR 2 model)
10
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
1
-
-
Supplying and erecting D. O. L. Startersuitable for 250V.single phase, 50 cycleswith overload element with necessarymaterials and connected to supply upto 2 H.P.
10
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
40
-
-
FIRE EMERGENCY VENTILATION PANEL
-
-
-
Incoming-
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following: R, Y & B Phase indicating lamps protected by 2 Amps MCBs. ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -100 Amps, 96 x 96 sq.mm digital ammeter with 3 Nos.100 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 sq.mm digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
125 Amps, 415 Volts, TPN,25 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
3
-
-
Outgoing Feeder with ON indication (MCB+OVERLOAD RELAY)
-
-
-
Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
3
-
-
Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.(Similar to Minilec -D2 MPR 2 model or approved equivalent make)
2
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
1
-
-
Supplying and erecting D. O. L. Startersuitable for 250V.single phase, 50 cycleswith overload element with necessary materials and connected to supply upto 2 H.P.
2
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
1
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
11
-
-
Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.(Similar to Minilec -D2 MPR 2 model or approved equivalent make )
8
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
8
-
-
Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 7.5 H.P. (Similar to L & T make MK-1 DOL Model or approved equivalent make )
8
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
65
-
-
LT CABLE
-
-
-
Supplying,erecting & terminating PVC armoured cable 31/2 core 120 sq mm aluminium conductor with continuous 12.97 sq mm (8 SWG) G.I earth wire complete erected with glands & lugs,on wall /trusses/pole or laid in provided trench/pipe as per sepcification no. CB-LT/AL
95
-
-
Supplying,erecting & terminating PVC armoured cable 31/2 core 95 sq mm aluminium conductor with continuous 8.35 sq mm (10 SWG) G.I earth wire complete erected with glands & lugs,on wall /trusses/pole or laid in provided trench/pipe as per sepcification no. CB-LT/AL
125
-
-
Supplying,erecting & terminating PVC armoured cable 4 core 16 sq mm copper conductor with continuous 5.48 sq mm (12 SWG) G.I earth wire complete erected with glands & lugs,on wall /trusses/pole or laid in provided trench/pipe as per sepcification no. CB-LT/CU
1325
-
-
Supplying,erecting & terminating PVC armoured cable 4 core 10 sq mm copper conductor with continuous 5.48 sq mm (12 SWG) G.I earth wire complete erected with glands & lugs,on wall /trusses/pole or laid in provided trench/pipe as per sepcification no. CB-LT/CU
475
-
-
Supplying,erecting & terminating PVC armoured cable 4 core 6 sq mm copper conductor with continuous 5.48 sq mm (12 SWG) G.I earth wire complete erected with glands & lugs,on wall /trusses/pole or laid in provided trench/pipe as per sepcification no. CB-LT/CU
125
-
-
Supplying,erecting & terminating PVC armoured cable 3 core 2.5 sq mm copper conductor with continuous 5.48 sq mm (12 SWG) G.I earth wire complete erected with glands & lugs,on wall /trusses/pole or laid in provided trench/pipe as per sepcification no. CB-LT/CU
12775
-
-
CABLE TRAY
-
-
-
Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
500
-
-
Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
150
-
-
Providing & erecting Hot dipped Galvanised cover suitable for perforated type Cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware in approved manner.
150
-
-
Note:- 1) Standard accessories shall typically include :
a) 'Z' section support -30 x 35 mm in size - 312 mm in length - 6 nos. support for one piece ladder of 2.5 m in length each.
b) Anchor fastner & nut bolts of adequate size - 16 nos.( 2 nos. per support)
c) Coupler plates with hardware - 70 x 200 x 3 mm thick - 2 nos. for each piece of 2.5 m Ladder complete with neccesory accessories such as Reducer, Horizontal Elbow & Tee, Up & Down Vertical Elbow & bend, Cross Piece complete erected in approved manner.
2) Provision for resting arrangement or support for perforated type Cable tray shall be made separetly as per iron work Item
3) Provision of cover for perforated type Cable tray shall be made only where it is absolutely necessary and make sure for locking arrangement.
4) Both type of cable tray shall be earthed properly.
-
-
-
SWITCH-SOCKET
-
-
-
Supplying & erecting modular type 3 pin 6/16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.
240
-
-
Supplying & erecting PVC surface modular switch box with double mounting plate for 3 module duly erected in an approved manner.
240
-
-
Supplying & erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.
240
-
-
Supplying & erecting CRCA sheet metal one way enclosures suitable for D.P.M.C.B/T.P.M.C.B/F.P.M.C.B.complete erected on angle iron /G.I frame
25
-
-
Supplying ,erecting & marking TPN MCB 40A to 63A C-series in provided board as per specification no.SW-SWR/MCB
25
-
-
PLUMBING SYSTEM
-
-
-
L.V SWITCHBOARDS
-
-
-
Design, Assembling, Supply, Installation, Testing and Commissioning of following LV Switchboards and Switchgears suitable for 415 Volts, 3 phase 4 wire, 50 Hz power distribution system. In conjunction with general specifications following points should also be considered and adhered to.
1) All the Switchboards shall be Indoor type, dust and vermin proof type compartmentalised design maintaining IP 54 degree of protection.
2) Switchboards shall be free standing floor mounted or wall mounted as required.
3) All the Switchboards shall be of compartmentalised with entire fabrication in 14 Gauge Sheet Steel and Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.
4) All hinged door shall be earthed through 2.5 sq mm tinned copper wire. Doors shall be pad locking type whereas for MCCB compartments they should be open able only in switch OFF mode.
5) All the bus bars and links shall be of Al/Copper with colour coded heat shrinkable insulating sleeves. Separate earth bus bars shall be provided along the length of the switchboards. 6) All measuring instruments (Meters) shall be of digital electronic with LED display of approved make and compatible with IBMS / BAS.
7) Adequate additional sets of C.T.s, potential free contacts, connectors, contactors with wiring etc are to be provided for IBMS including space required for various transducers.
8) Adequate space for cable entries and terminations shall be provided referring SLDs. Cable entries can be either from the top or bottom as required.
9) All panel switches with locking arrangement.
10) Nut, bolts holding the lugs to bus bar shall be of bimetallic/brass/cadmium plated steel.
11) For the purpose of panel boards above rates shall be inclusive of work along with angle iron work.
-
-
-
UTILITY PANEL
-
-
-
Incoming
Providing & erecting 3 Pole MCCB of 200A,415V capacity with S.C. rating 25 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron /G.I. frame as per specification no. SW-SWR/MCCB
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following: R, Y & B Phase indicating lamps protected by 2 Amps MCBs. ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -160 Amps, 96 x 96 sq.mm digital ammeter with 3 Nos.160 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 sq.mm digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
200 Amps, 415 Volts, TPN,25 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle
type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
8
-
-
Outgoing Feeder
-
-
-
Supplying, erecting & marking TPN MCB 40A to 63A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
9
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
3
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
40
-
-
SUMP PUMP PANEL
-
-
-
Incoming
Providing & erecting 3 Pole MCCB upto 63A, 415V capacity with S.C. rating 16 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame.
1
-
-
Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In)and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's.
1
-
-
Panel compartment shall be fitted with following: R, Y & B Phase indicating lamps protected by 2 Amps MCBs. ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -63 Amps, 96 x 96 sq.mm digital ammeter with 3 Nos.63 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 sq.mm digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
100 Amps, 415 Volts, TPN,16 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle
type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
3
-
-
Outgoing Feeder MPCB (MCB+OVERLOAD RELAY)
-
-
-
Supplying, erecting & marking TPN MCB 6A to 32A, Cseries in provided distribution board as per specification No.SW-SWR/MCB
6
-
-
Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.(Similar to Minilec -D2 MPR 2 model or approved equivalent make )
6
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
6
-
-
Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 7.5 H.P. (Similar to L & T make MK-1 DOL Model)
4
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
35
-
-
Water Transfer Pump Panel
-
-
-
Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c.Submersible/ centrifugal pump set upto 10 - 15 HPconsisting of Star Delta starter having relay range 13-22 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof encloser with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase inbalence etc ( Similar to LT model no.MU G15/ CAT NO. CS94091SODO or approved equivalent make )
1
-
-
Booster Pump Panel (Terrace Lvl)
-
-
-
Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c.Submersible/ centrifugal pump set upto 10 HP consisting of Star Delta starter having relay range 6-10 Amp,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof encloser with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase inbalence etc ( Similar to LT model no.MU G15/ CAT NO. CS94091SOVO or approved equivalent make )
1
-
-
Borewell Pump Panel
-
-
-
Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5- 10 HP consisting of DOL starter having relay range 28-42 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof encloser with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase inbalence etc ( Similar to LT model no.MU G10 H / CAT NO. SS95974 or approved equivalent make )
1
-
-
STP Panel
-
-
-
Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5- 10 HP consisting of DOL starter having relay range 28-42 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof encloser with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase inbalence etc ( Similar to LT model no.MU G10 H / CAT NO. SS95974 or approved equivalent make )
1
-
-
LT CABLE
-
-
-
Supplying, erecting & terminating PVC armouredcable 4 core 10 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as 'per specification no. CB-LT/CU
225
-
-
Supplying, erecting & terminating PVC armoured cable 4 core 4 sq mm copper conductorcontinuous 5.48 sq mm (12 'SWG) G.I. earth wire complete erected with glands & lugs, 'on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
245
-
-
Supplying & erecting flat flexible 3 core 10 sq.mmPVC sheathed submersible type copper cable suitably clamped at fixed intervals with coloum pipe assembly complete.
25
-
-
Supplying and erectingflat flexible 3 core 6 sq mm PVC sheathed submersible typecopper cable suitably clamped at fixed intervals with column pipe assembly complete.
25
-
-
Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.
65
-
-
Supplying and erecting flat flexible 3 core 2.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.
50
-
-
CABLE TRAY
-
-
-
Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
15
-
-
Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
35
-
-
Providing & erecting Hot dipped Galvanised cover suitable for perforated type Cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware in approved manner.
150
-
-
Note:- 1) Standard accessories shall typically include :
a) 'Z' section support -30 x 35 mm in size - 312 mm in length - 6 nos. support for one piece ladder of 2.5 m in length each.
b) Anchor fastner & nut bolts of adequate size - 16 nos.( 2 nos. per support)
c) Coupler plates with hardware - 70 x 200 x 3 mm thick - 2 nos. for each piece of 2.5 m Ladder complete with neccesory accessories such as Reducer, Horizontal Elbow & Tee, Up & Down Vertical Elbow & bend, Cross Piece complete erected in approved manner.
2) Provision for resting arrangement or support for perforated type Cable tray shall be made separetly as per iron work Item
3) Provision of cover for perforated type Cable tray shall be made only where it is absolutely necessary and make sure for locking arrangement.
4) Both type of cable tray shall be earthed properly.
-
-
-
FIRE FIGHTING SYSTEM
-
-
-
LT PANEL
-
-
-
Design, Assembling, Supply, Installation, Testing and Commissioning of following LV Switchboards and Switchgears suitable for 415 Volts, 3 phase 4 wire, 50 Hz power distribution system. In conjunction with general specifications following points should also be considered and adhered to.
1) All the Switchboards shall be Indoor type, dust and vermin proof type compartmentalised design maintaining IP 54 degree of protection.
2) Switchboards shall be free standing floor mounted or wall mounted as required.
3) All the Switchboards shall be of compartmentalised with entire fabrication in 14 Gauge Sheet Steel and Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.
4) All hinged door shall be earthed through 2.5 sq mm tinned copper wire. Doors shall be pad locking type whereas for MCCB compartments they should be open able only in switch OFF mode.
5) All the bus bars and links shall be of Al/Copper with colour coded heat shrinkable insulating sleeves. Separate earth bus bars shall be provided along the length of the switchboards. 6) All measuring instruments (Meters) shall be of digital electronic with LED display of approved make and compatible with IBMS / BAS.
7) Adequate additional sets of C.T.s, potential free contacts, connectors, contactors with wiring etc are to be provided for IBMS including space required for various transducers.
8) Adequate space for cable entries and terminations shall be provided referring SLDs. Cable entries can be either from the top or bottom as required.
9) All panel switches with locking arrangement.
10) Nut, bolts holding the lugs to bus bar shall be of bimetallic/brass/cadmium plated steel.
11) For the purpose of panel boards above rates shall be inclusive of work along with angle iron work.
-
-
-
FIRE FIGHTING PANEL
-
-
-
Incoming-
Supplying and erecting approved make ON LOAD Four Pole Automatic Transfer Switchsuitable for415V, 50 Hz,630A capacity conforming to IEC: 60947-1 & IEC: 947-6-1/ IS: 13947-1, with Enclosure, automatic/manual inbuilt Time delay, high transfer speed, excellent breaking capacity,superior making capacity, compact & light weight, erected on provided angle iron / G.I. frame and connected with provided leads.
1
-
-
Providing & erecting3 Pole MCCB of 600/630 A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal and magnetic setting with provided leads on iron/G.I. frame as per specification No. SW-SWR/MCCB
1
-
-
Supplying & erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In) and adjustable time delay 100/200 milisecond suitable for 400A upto 800A MCCB.
1
-
-
Panel compartment shall be fitted with following: R, Y & B Phase indicating lamps protected by 2 Amps MCBs. ON, OFF, Trip indicating lamps protected by 2 Amps MCBs. Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting Prewired meter module suitable for MCCB panel board with CT's and emf's vif meter.
1
-
-
0 -630 Amps, 96 x 96 sq.mm digital ammeter with 3 Nos.630 / 5 amps, 15 VA Class I CT’s. and Ammeter Selector Switch
Supplying & erecting panel mounting type digital ammeter having three and half digit LED display ,external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided on provided panel complete calibration certificate from manufacturer.
1
-
-
0 - 500 Volts, 96 x 96 sq.mm digital voltmeter with Voltmeter Selector Switch and protected by 2 amp TP MCB’s Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1
-
-
Providing & erecting Selector switch suitable for Voltmeter/Ammeter for 3 phase A.C supply 500v,50 hz on provided box /panel and duly connecting with necessary PVC wire leads & lugs.
2
-
-
Bus Bars -
750 Amps, 415 Volts, TPN,36 KA rating, uniform Aluminium busbars with color coded heat shrinkable insulating sleeves.
Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle
type lug) to both the end with high grade polyolefininsulation sleeve complete as per specification no. BCP-BB
8
-
-
Outgoing Feeder (MCCB+OVERLOAD RELAY)
-
-
-
Providing & erecting 3 Pole MCCB of 250A,415V capacity with S.C. rating 36 kA (Ics=100% of Icu),thermal and magnetic setting with provided leads on iron /G.I.frame as per specification No. SW-SWR/MCCB ( Hydrant+Sprinkler + Spare)
3
-
-
Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.(Similar to Minilec -D2 MPR 2 model or approved equivalent make )
2
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
3
-
-
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB ( Booster + Spare)
2
-
-
Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.(Similar to Minilec -D2 MPR 2 model or approved equivalent make )
1
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
2
-
-
Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB( Jockey + Spare)
3
-
-
Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.(Similar to Minilec -D2 MPR 2 model or approved equivalent make )
1
-
-
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamps230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.
3
-
-
Supplying and erecting fully Automatic star/delta starter suitable for 120 H.P for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame.
2
-
-
Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 7.5 H.P. (Similar to L & T make MK-1 DOL Model or approved equivalent make )
2
-
-
Supplying and erecting fully Automatic star/delta starter suitable for 12.5 H.P. to 15 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame. (similar to L & T make MK-1 FASD model or approved equivalent make .)
1
-
-
Providing & fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc.including cutting,drilling,bending,welding,riveting etc.treated with anti-rust treament and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paints as directed.
85
-
-
LT CABLE
-
-
-
Supplying, erecting & terminating PVC armouredcable 1100 V. 3½ core 185 sq mmaluminium conductor with continuous 12.97 sq mm (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
60
-
-
Supplying, erecting & terminating PVC armoured cable 3 core 25 sq mmaluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/pipe as per specification no. CB-LT/AL
125
-
-
Supplying, erecting & terminating PVC armouredcable 3 core 6 sq mm copper conductorcontinuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs,on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
60
-
-
CABLE TRAY
-
-
-
Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
15
-
-
Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
35
-
-
Providing & erecting Hot dipped Galvanised cover suitable for perforated type Cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware in approved manner.
150
-
-
Note:- 1) Standard accessories shall typically include :
a) 'Z' section support -30 x 35 mm in size - 312 mm in length - 6 nos. support for one piece ladder of 2.5 m in length each.
b) Anchor fastner & nut bolts of adequate size - 16 nos.( 2 nos. per support)
c) Coupler plates with hardware - 70 x 200 x 3 mm thick - 2 nos. for each piece of 2.5 m Ladder complete with neccesory accessories such as Reducer, Horizontal Elbow & Tee, Up & Down Vertical Elbow & bend, Cross Piece complete erected in approved manner.
2) Provision for resting arrangement or support for perforated type Cable tray shall be made separetly as per iron work Item
3) Provision of cover for perforated type Cable tray shall be made only where it is absolutely necessary and make sure for locking arrangement.
4) Both type of cable tray shall be earthed properly.
-
-
-
LIFT
-
-
-
Designing, fabricating, testing, installing, commissioning Machine room less & Gearless 15 passenger (1020 Kg) capacity Elevators system for 10 stops Travel height 36m Alternating Current Voltage Frequency (ACVF) drive system Travel speed of 1.5m/sec SS interior car finish Granite flooring Full height best quality mirror 2 Hours Fire rated Fully Automatic Landing doors in Stainless steel Hairline finish Automatic evacuation to nearest floor (ARD), Entire elevator system shall be complying to relevant all international standards, obtaining licence to operate the elevators from the concern authority including free of cost maintenance for 12 months after completion of the work.
5
-
-
Designing, fabricating, testing, installing, commissioning Machine room less & Gearless 15 passenger (1020 Kg) capacity Service Elevators system for 10 stops Travel height 36m Alternating Current Voltage Frequency (ACVF) drive system Travel speed of 1.0m/sec SS interior car finish 2mm thick PVC flooring 2 Hours Fire rated Fully Automatic Landing doors in Stainless steel Hairline finish Automatic evacuation to nearest floor (ARD), Entire elevator system shall be complying to relevant all international standards, obtaining licence to operate the elevators from the concern authority including free of cost maintenance for 12 months after completion of the work.
1
-
-
AMC
-
-
-
ANNUAL MAINTENANCE CONTRACT (AMC)- i) FREE AMC- Contractor shall have to provide Comprehensive AMC (including providing labour & material on site) free of cost for all electromechanical systems including moving/stationary parts of equipments & machineries concurrent with the DLP for first two years. ii) CHARGABLE AMC- Contractor shall be paid against AMC (Service charge only) for 3rd, 4th & 5th year AMC concurrent with the DLP. Contractor shall quote for the same in his offer. (Material if any shall be supplied by the PMRDA during 3rd, 4th & 5th year of AMC).
iii) Civil work related to maintainance & repair of electromechanical system shall have to be carried out by the contractor at his cost (including material, labour, transport, lifting, staging, scaffolding and any other) during both the stages of AMC during entire DLP.
-
-
-
Annual Maintanance Contract of the ELECTRICAL system supplied, installed, commissioned by the contractor for 3rd,4th and 5th year in concurance with DLP.This will include Operation, routine servicing / regular maintanance, preventive maintanance of equipment and components and break down repairs as and when occured, ensuring the system does not remain out of service for a period of not more than 8 Hrs. in case of major breakdown and one Hr. in case of minor break down due to any unforeseen break down. The rate shall include for all labour, supervision ( including engineers / supervisors for round the clock as required to operate the system) and required for satisfactory operation & maintanance of the installation and system. (Furnish separately the minimum man power supposed to be deployed along with the rates per each category)
-
-
-
For Third Year of DLP
1
-
-
For Fourth Year of DLP
1
-
-
For FifthYear of DLP
1
-
-
ELV SYSTEM
-
-
-
TELEPHONE SYSTEM
-
-
-
Supply, Installation, Testing and Commissioning of following Krone make Main Distribution Frame (MDF) protector panel for the service providers incoming lines.The panel shall have provision for both top and bottom cable entry.
-
-
-
1000 Pair Protector Panel
Supplying, erecting & commissioning MDF Box 800 x 800 pairs as per specification No. WG-TW
2
-
-
Supply of Krone make Cable termination block pre-packaged with wiring block with legs, insert labels, label holders, jumper troughs, metal back panel, duct assembly, wire managers for distribution, screws, washers and an instruction sheet for termination of incoming pairs.
-
-
-
Supplying, erecting & commissioningMDF Box 250 x 250pairs as per specification No. WG-TW
4
-
-
Supplying, erecting & commissioning MDF Box200 x 200 pairs as per specification No. WG-TW
2
-
-
Supplying, erecting & commissioning MDF Box100 x 100 pairs as per specification No. WG-TW
2
-
-
Supplying, erecting & commissioning Main Distribution Frame (MDF) Box 50x50 pairs as per specification No.WGTW
2
-
-
Supply of twisted telephone armoured cable.The cable shall be as per specifications laid down in the tender.
-
-
-
Supplying & erecting Jelly filled armoured telephone cable 100 pairwith 0.5 mm dia. laid in provided trench as per pecification No.WG-TW
750
-
-
Supplying & erecting Jelly filled armoured telephone cable 50 pair with 0.5 mm dia. laid in provided trench as per
specification No. WG-TW
45
-
-
Supplying & installing UTP networkingCat-6 cablesuitable for LAN / WAN Computer net-working as per specification
No.WG-COC/NC
31500
-
-
Single outlet faceplate with RJ-11 jack
Supplying and erecting modular type telephone socket one gangwith safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.
700
-
-
Supplying and erecting Broadband splitter unit with 1 input & 2 output RJ 11 female connectors.
25
-
-
EPABX SYSTEM (IP)
-
-
-
Supply, installation, testing and commisioning EPABX system with Caller ID facility configured as per below- 2 PRI Line card 4 Digital Port
700 Analogue Extension ( Expandable to 100 Extn )
Caller ID Inbuilt
Voice attendant Inbuilt
Upgradable to IP Extensions.
Battery backup Float charger with 4 Nos. 12Volt batteries
IP server card & Licenses
32 line Extension card
1 PRI line additional card
1
-
-
Supply, installation, testing and commisioning of Digital key telephone for operator consol with 128 keys DDS console with all accessories.
Supplying, installing, testing & commissioning approved type Digital key telephone / IP telephone instrument as per
specification in approved manner.
1
-
-
Supply, installation, testing and commisioning of Telephone Handset-Caller ID
Supplying, installing, testing & commissioning approved type Push button telephone instrument desk top/wall mount unit as per specification in approved manner
50
-
-
Supply, installation, testing and commisioning of Telephone Handset-Without Caller ID
Supplying, installing, testing & commissioning approved type Push button telephone instrument desk top/wall mount with caller ID unit as per specification in approved manner
650
-
-
NETWORKING SYSTEM
-
-
-
Supply, installation, testing and commissioning of 12 port Ethernet central switch(JACK PANEL) as per schematic
Supplying and fixing 12U Wall Mount Rack (Dimension-DxWXH - 450X550X635 mm) as per specification in approved manner
5
-
-
Supplying, fixing, and configuring Web Smart Power over Ethernet Switch of 24 Ports on provided rack or as directed as per specification No. WG-NWC/ENS
1
-
-
Supplying, fixing, and configuring Layer 3/20 10/100/1000 Base-T ports + 4 Combo 10/100/1000Base-T/SFP ports + 4 10GE SFP+ ports - SI Image as per specification in approved manner
1
-
-
Supplying, fixing, and configuring Modularised Multiservice Router as per specification in approved manner
1
-
-
Supply, installation, testing and commissioning of following Ethernet work station switch as per specification.
Supplying and fixing Rack type 24 Ports, Light guide Interconnect Unit with adapter panel for termination of Optical fibrecablesonwall/ provided U Rack complete as per specification no.WG-NAS/ LIU
40
-
-
Supply and installation of following size Racks with all accessories & wire managers
Supplying and fixing 42U Floor Mount Rack (Dimension-DxWXH - 800X600X1866 mm)
1
-
-
Supplying and fixing 36U Floor Mount Rack (Dimension-DxWXH - 800X600X1600 mm) as per specification in approved manner
5
-
-
UTP Cat 6, Patch Cord, 2 Mtr (Rack Side)
UTP Cat 6, Patch Cord, 2 Mtr (User End)
Supplying and fixing 2 meter length, UTP Patch cord of Cat 6 type in position as per specification No. WG-COC/PC
2000
-
-
Supply, installation, testing and commissioning of Fibre Optic Cable-10G/1G
Supplying and erecting FR grade, PVC armoured multimode armoured multimode Optical Fibre Cable with 6 fibres, with core dia 50/125 μm (OM3) suitable for 1 GBps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC LSZH
250
-
-
Supply, installation, testing and commissioning of Category 6 LAN cable consisting of 24 AWG solid copper conductors and as per the specification. The cable shall have flexible jacket and ripcord for easy Strip ability(Laying of cable through tray)
Supplying & installing UTP networkingCat-6 cablesuitable for LAN / WAN Computer net-working as per specification No.WG-COC/NC
45000
-
-
Supply,Installaton,Testing and Commissioning of Single outlet faceplate with RJ-45 UTP information Outlets.The price shall include 2 mm thick GI boxes, inner plates, outer plates etc.
Supplying and erecting modular type computer Jack RJ 45 with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.
1000
-
-
TV SYSTEM
-
-
-
Supply, installation, testing and commissioning of amplifier system (as per schematic) as per specification.
1
-
-
Supplying & installing Co-axial cable low voltage grade RG-11 as per specification No.WG-TW
150
-
-
Supply, installation, testing and commissioning of RG6-U type Co-axial cable as per the specification.
825
-
-
Supply, installation, testing and commissioning of TV 6/8 way splitter with all specification.
6
-
-
Supplying and erecting modular type T.V. socket single outlet ISI mark approved make duly erected on provided plate and box with wiring connections complete.
20
-
-
Supply,installation testing and commissioning of HDMI port for TV system with all accessories.
20
-
-
Supply,installation testing and commissioning of HDMI cable with all accessories.
185
-
-
Supply,installation testing and commissioning of 32'' LED TV
15
-
-
Supply,installation testing and commissioning of 40'' LED TV
5
-
-
CCTV (IP IR) SYSTEM
-
-
-
Supply,installation,testing ,commissioning of IR INDOOR DOME CAMERA with
1080p Indoor Dome camera with 1/2.7‑inch CMOS, Total sensor pixels 1952 x 1092 (2MP), Sensitivity – (3200K, reflectivity 89%, F1.3, 30IRE) Color 0.24 lx, Mono 0.05 lx, With IR 0.0 lx, Dynamic range, Fully configurable quad streaming, Regions of interest and E-PTZ, IR with 15 m (50 ft) viewing distance, White Balance, Automatic Electronic Shutter;Backlight compensation, Intelligent Dynamic Noise Reduction, Intelligent defog, Privacy Masking, MOTION+, 3 to 10 mm Varifocal lens, Alarm input/output- 1/1, Audio Streaming Full-duplex / half duplex, Signal-to-Noise Ratio 50 dB, SD card slot, ONVIF Profile S, 3-axis adjustment, CE, UL, FCC certified.
75
-
-
Supply,installation,testing ,commissioning of PTZ CAMERA with (Outdoor)
1080p HD PTZ Camera with 1/2.8" progressive scan Exmor CMOS, Effective pixels 1984 (H) x 1105 (V) (approximately 2.43M pixels), 30x Optical Zoom (4.3 mm–129 mm), 16X Digital Zoom, Independent and Fully configurable quad streaming, Minimum Illumination- Sense up on- Color: Min 0.02 lux , B/W: Min 0.004 lux, With infrared (IR) 0 lux, Electronic Shutter, WDR, Dynamic Noise Reduction, BLC, White Balance, Mechanical switchable IR filter, Pan Range 360° continuous, Tilt Range 0°–90°, Pan/Tilt Modes - Pan: 0.1°/s - 240°/s; Tilt: 0.1°/s - 120°/s, Presets PAN/Tilt Spees- Pan: 240°/s Tilt: 160°/sPresets 256 , Tours,IR distance 180 m (590 feet) (Detection), Audio- 1/1 Channel In/Out, Micro SD card support, Alarms i/p & o/p -2/1, 24 individually configurable privacy masks, Defog, IP66 , ONVIF Profiles S & G, CE, UL Certified
8
-
-
Supply,Installation,Testing & Commissioning of 24 Channel NVR with,
24ch, Pre-installed, pre-configured IP storage solution with 8 TB storage capacity, Advanced user and alarm management, Intel i3-2120 processor, DDR3 1066/1333 MHz UDIMM, 4 GB, DDR3‑1333 SO‑DIMM (2 x 2 GB), 4 trays: 3.5‑inch SATA, 1 x USB DVI port, onboard graphics VGA port, 1 x 1 GbE RJ45 port, Windows Storage Server 2008 R2 (64-bit), 4‑bay mini tower, 6 x USB 2.0, 1 x USB 3.0 port, CE Certified. Video Management software shall support Maps, Alarm management, Virtual matrix functionality, The network failure is registered immediately if the failure is longer than 10 seconds and Once the network connection has been restored, gaps in the recording are Automatically filled without manual intervention. video client software with Live viewing of multiple cameras, Local recording and snapshots, PTZ control and digital zoom, Playback and export from storage, Motion and forensic search, Multi- screen grid selection (1, 2X2, 3X3 and 4X4), Sequencing selection, Audio and volume control, Log-off and help, Task panels for snapshots (BMP, JPG or PNG format)
4
-
-
Central Viewing software for NVR along with required server.
1
-
-
Supplying & installing UTP networkingCat-6 cablesuitable for LAN / WAN Computer net-working as per specification No.WG-COC/NC
3225
-
-
Supplying and erecting FR grade, PVC armoured multimode armoured multimode Optical Fibre Cable with 6 fibres, with core dia 50/125 μm (OM3) suitable for 1 GBps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC LSZH
485
-
-
Supply & Laying of Armoured FRLS Power Cable : 3 Core x 1.00 Sq.mm PVC insulated ,PVC Sheathed Cablelaid on Surface , or in cable trays, or in GI Conduits as per site requirements with GI saddles & spacers with termination lugs, cable tags etc.
Supplying, erecting & terminating PVC armoured cable 3core 2.5 sq mm copper conductorcontinuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
275
-
-
Supply,installation Single mode 2 core Fibre optic cable, Specially Armoured and with Zero Halogen Low Smoke outer Sheath , with required terminations, Junction Box, Connectors, Cable tie`s & Tags.
Supplying and erecting FR grade, PVC armoured multimode armoured multimode Optical Fibre Cable with 6 fibres, with core dia 50/125 μm (OM3) suitable for 1 GBps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC LSZH
175
-
-
Supply,installation of SMPS based 12 volt 5 Amp power supply with all accessories.
25
-
-
Supply,installation of RJ45 & power pin connector for camera with all accessories.
85
-
-
Supply,installation of 40' LED Monitor with all accessories.
4
-
-
SITC Equipment racks for mounting the Server Racks in the Control Room, and Racks for mounting field mounted Switches with Tamper Switch to be monitored on IBMS, and other network Equipment as per consultant guidelines during the execution of project.
1
-
-
BIOMETRIC SYSTEM
-
-
-
Supply,installation,testing ,commissioning of IP Based Finger Print Attendance Machine with One Year License Time & Attendance Software
4
-
-
IP BASED ACCESS CONTROL SYSTEM
-
-
-
Supply,installation,testing ,commissioning of Proximity card based Single Door Controller with
• Optical Fingerprint sensor
• Access Control and Time-Attendance
• 50,000 Events and 9,600 Fingerprint Template Storage
Locks
25
-
-
Electro magnetic Lock with 600 LBS & Drop bolt lock
25
-
-
Egress Switch
25
-
-
Plain Proximity Cards
300
-
-
Supplying & installing UTP networkingCat-6 cablesuitable for LAN / WAN Computer net-working as per specification No.WG-COC/NC
750
-
-
CONFERENCE ROOM SYSTEM
-
-
-
Supply,installation,testing ,commissioning of High definition audio/video conferencing system with camera & all accessories system.
1
-
-
Supply,installation,testing ,commissioning of POP UP BOX on table with input connectors.
5
-
-
Supply,installation,testing ,commissioning of table embedded MICE
8
-
-
Supply,installation,testing ,commissioning of 2800 Lumens HD projector.
1
-
-
Supply,installation,testing ,commissioning of fixed 6x8 feet projector screen.
1
-
-
Supply,installation,testing ,commissioning of audio mixture
1
-
-
Supply,installation,testing ,commissioning of audio system with 4 speaker & amplifier.
1
-
-
Supplying & installing UTP networkingCat-6 cablesuitable for LAN / WAN Computer net-working as per specification No.WG-COC/NC
125
-
-
WIFI SYSTEM (Firewall & Controller Wi-Fi Solution)
-
-
-
Supply,installation,testing ,commissioning of WIFI unit with all accessories system.
4
-
-
Supply,installation,testing ,commissioning of 24 Online Wi-Fi Management Module with Web Surfing Module, with 25 User License and Walk in user Module with all accessories
1
-
-
FIRE ALARM+PUBLIC ADDRESS SYSTEM
-
-
-
Comprehensive automatic fire detection and alarm system designed as per IS 2189:1999 and NFPA 72 to be provided at all places as required by the fire safety guidelines.
Supply, Installation, Testing & Commissioning of Microprocessor based 4 loop capacity , Networkable Analogue Addressable type fire alarm control panel with Display and Fully functional QWERTY type keypad.
The panel shall be equipped with 20% spare capacity with each loop having a maximum loading of 125 detectors and 125 devices in one loop. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and for 2 hours during an emergency conditions as required. (UL 9th Edition Approved). The Panel shall have a High Speed Network Communication Module with Single Mode Fiber Optic Connectivity (100 Mbps band rate).
1
-
-
Supply,installation,Testing and commissioning of Interfac Software between fire alarm panel & PA system
1
-
-
Supply, Installation, Testing & Commissioning Serial Outlying Annunciater ( Repeaters) with 640 Character Backlit LCD Display and fixed function Keys and Soft Keys. The serial Annunciater shall repeat the signals from the entire FACP Network.
2
-
-
Supply, Installation, Testing & Commissioning of Analog Addressable type Self Acclimatising Multi Sensing (Photo+Heat) detector (WITH SOUNDER BASE) with standard mounting base, LED, Address Switch, complete with MS Powder coated Junction Box for mouting on Surface / on False Ceiling / Below False Floor, Cable lugs at Ends, cable compression glands, cable tags and Ferruling.(For Guest Room)
6
-
-
Supply, Installation, Testing & Commissioning of Analog Addressable type Self Acclimatising Multi Sensing (Photo+Heat) detector (WITHOUT SOUNDER BASE) with standard mounting base, LED, Address Switch, complete with MS Powder coated Junction Box for mouting on Surface / on False Ceiling / Below False Floor, Cable lugs at Ends, cable compression glands, cable tags and Ferruling.
327
-
-
Supply, Installation, Testing & Commissioning of Analog Addressable type Heat detector (WITHOUT SOUNDER BASE) with standard mounting base, LED, Address Switch, complete with MS Powder coated Junction Box for mouting on Surface / on False Ceiling / Below False Floor, Cable lugs at Ends, cable compression glands, cable tags and Ferruling.
60
-
-
Supply, Installation, Testing & Commissioning of Analog Addressable type Rate Of Rise Of Temp detector (WITHOUT SOUNDER BASE) with standard mounting base, LED, Address Switch, complete with MS Powder coated Junction Box for mouting on Surface / on False Ceiling / Below False Floor, Cable lugs at Ends, cable compression glands, cable tags and Ferruling.
68
-
-
Supply, Installation, Testing & Commissioning of Analog Addressable type Beam detector (WITHOUT SOUNDER BASE) with standard mounting base, LED, Address Switch, complete with MS Powder coated Junction Box for mouting on Surface / on False Ceiling / Below False Floor, Cable lugs at Ends, cable compression glands, cable tags and Ferruling.
2
-
-
Supply, Installation, Testing & Commissioning of Fault Isolator Module , complete with MS Powder coated Junction Box for mouting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling.
50
-
-
Supply, Installation, Testing & Commissioning of HOOTER WITH STROBE, complete with MS Powder coated Junction Box for mouting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling.
20
-
-
Supply, Installation, Testing & Commissioning of RESPONSE INDICATOR, complete with MS Powder coated Junction Box for mouting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling.
55
-
-
Supply, Installation, Testing & Commissioning of Field Charging Power Supply required to provide 24VDC power to the Notification devices. The FCPS shall be supplied with all necessary enclosuresa and shall be monitored by the Fire Alarm Control Panel.
5
-
-
Supply, Installation, Testing & Commissioning of Addressable Control Module with Address Switch and all mounting accessories complete as required.
20
-
-
Supply, Installation, Testing & Commissioning of Addressable Relay Module with Address Switch and all mounting accessories complete as required.Shall be complete with Pilot Relay for Tripping of Third Party Equipment, suitable for switching 5A/15A current through the Relay contacts , MS Powder coated Junction Box for mouting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling. For AHUs and staircase pressurization fans.
12
-
-
Supply, Installation, Testing & Commissioning of Addressable Monitor Module with Address Switch and all mounting accessories, complete with MS Powder coated Junction Box for mouting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling.For Sprinkler Flow Switch /Tamper Switch for Monitoring.
20
-
-
Supply, Installation, Testing & Commissioning of Addressable Manual Call Point with all mounting accessories , complete with MS Powder coated Junction Box for mouting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling.
20
-
-
Supply, laying of ISI Marked 2 Twisted Pair x 1.5 mm2, Multistranded Copper, Zero Halogen, Low Smoke, Fire Servival, Armoured cable, RED in Colour, laid on surface with GI saddle-spacers every 0.3 meters. Complete with GI Junction Box, lugs, cable compression glands, cable tags and Ferruling.
(XLPEarmoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ceiling as per specification No.CB-LT/CU)
9100
-
-
PUBLIC ADDRESS SYSTEM
-
-
-
Supply, Installation, Testing & Commissioning of Ceiling / Wall Mounted Voice Evacuation Speaker having power taps upto 4 W and frequency response of 400 to 4000Hz for Voice Evacuation.
-
-
-
Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification No. FFPA/SOC
169
-
-
Supply, Installation, Testing & Commissioning of voice alarm controller with 6 zone output and call station.
1
-
-
Supply, Installation, Testing & Commissioning of voice alarm router with 6 zone output.
1
-
-
Supplying, erecting, testing and commissioningmicrophone as per specification No. FFPA/MIC
1
-
-
Supplying & erecting, Table stand for microphone.(Similar to AHUJA/or approved equivalent make model DGT)
1
-
-
Supplying erecting, testing to 2 core shielded Microphone cable as per specification No. FF-PA/MCC
10
-
-
Supply, Installation, Testing & Commissioning of Digital Audio Amplifier capable of processing one of 8 audio channels and total of 400W at 70.7 VRMS output along with necessary enclosures. The DAA shall be fully monitored for fault and alarm reporting. The proposed Digital Amplifiers shall not be rail mounted / dependant on Fire Panel CPU for operation. (Failure of Fire Panel CPU shall not result in failure of Amplifier operation).
-
-
-
Supplying, erecting, testing and commissioning amplifier 120 W for Public address system suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply as per specification No.FF-PA/AFR
8
-
-
Supply,Laying of Armoured Speaker Cable with all accessories.
-
-
-
Supplying erecting, testing to 2 core shielded Microphone cable as per specification No. FF-PA/MCC
5350
-
-
Supplying and erecting XLPEarmoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ceiling as per specification No.CB-LT/CU
250
-
-
AMC
-
-
-
ANNUAL MAINTENANCE CONTRACT (AMC)- i) FREE AMC- Contractor shall have to provide Comprehensive AMC (including providing labour & material on site) free of cost for all electromechanical systems including moving/stationary parts of equipments & machineries concurrent with the DLP for first two years. ii) CHARGABLE AMC- Contractor shall be paid against AMC (Service charge only) for 3rd, 4th & 5th year AMC concurrent with the DLP. Contractor shall quote for the same in his offer. (Material if any shall be supplied by the PMRDA during 3rd, 4th & 5th year of AMC).
iii) Civil work related to maintainance & repair of electromechanical system shall have to be carried out by the contractor at his cost (including material, labour, transport, lifting, staging, scaffolding and any other) during both the stages of AMC during entire DLP.
-
-
-
Annual Maintanance Contract of the ELV system supplied, installed, commissioned by the contractor for 3rd,4th and 5th year in concurance with DLP.This will include Operation, routine servicing / regular maintanance, preventive maintanance of equipment and components and break down repairs as and when occured, ensuring the system does not remain out of service for a period of not more than 8 Hrs. in case of major breakdown and one Hr. in case of minor break down due to any unforeseen break down. The rate shall include for all labour, supervision ( including engineers / supervisors for round the clock as required to operate the system) and required for satisfactory operation & maintanance of the installation and system. (Furnish separately the minimum man power supposed to be deployed along with the rates per each category)
-
-
-
For Third Year of DLP
1
-
-
For Fourth Year of DLP
1
-
-
For FifthYear of DLP
1
-
-
AIR CONDITIONING SYSTEM
-
-
-
Supply, Installation, Testing, Erection and Commissioning of Variable Refrigerant FLOW System (High side Items).
-
-
-
Supply, Installation, Testing, Erection and Commissioning of 44 HP ( i.e. 20 HP # 1 No., 12 HP # 2 No.) Condensing Unit. The Condensing Unit (Outdoor Units) shall comprise of Inverter Driven Compressor / Digital scroll Air Cooled condenser with R-410A .The Multiple Compressors offered shall have independent refrigerant circuit. Also Compressor shall cut-off automatically in part load condition. The unit shall have micro-processor controls. The outdoor units shall be installed on the space allotted in the drawings. Scope shall include all support for the indoor and outdoor units. The units shall be factory assembled and only the refrigerant piping shall be carried out at the site. The noise level for the outdoor unit shall be less than 60 dbA. The price shall include with all suitability of earthing as well specified electrical fittings in complete, with all accessories like scafoldings, safe loading, unloading in position, fixing the outdoor in line, level and plumb as directed by Engineer- in-charge, with necessary anti-vibration heavy duty pads, Nuts, bolts, fastners, etc. All ODU shall be coated with anti-corrosive coating to withstand wheathering effects for 5 years.
2
-
-
Supply, Installation, Testing, Erection and Commissioning of 32HP ( i.e. 16 HP # 2Nos.) Condensing Unit. The Condensing Unit (Outdoor Units) shall comprise of Inverter Driven Compressor / Digital scroll Air Cooled condenser with R-410A .The Multiple Compressors offered shall have independent refrigerant circuit. Also Compressor shall cut-off automatically in part load condition. The unit shall have micro-processor controls. The outdoor units shall be installed on the space allotted in the drawings. Scope shall include all support for the indoor and outdoor units. The units shall be factory assembled and only the refrigerant piping shall be carried out at the site. The noise level for the outdoor unit shall be less than 60 dbA The price shall include with all suitability of earthing as well specified electrical fittings in complete, with all accessories like scafoldings, safe loading, unloading in position, fixing the outdoor in line, level and plumb as directed by Engineer- in-charge, with necessary anti-vibration heavy duty pads, Nuts, bolts, fastners, etc. All ODU shall be coated with anti-corrosive coating to withstand wheathering effects for 5 years.
2
-
-
Supply, Installation, Testing, Erection and Commissioning of 46 HP ( i.e. 20 HP # 1 Nos.,14 HP # 1Nos.,12 HP # 1Nos. ) Condensing Unit. The Condensing Unit (Outdoor Units) shall comprise of Inverter Driven Compressor / Digital scroll Air Cooled condenser with R-410A .The Multiple Compressors offered shall have independent refrigerant circuit. Also Compressor shall cut-off automatically in part load condition. The unit shall have micro-processor controls. The outdoor units shall be installed on the space allotted in the drawings. Scope shall include all support for the indoor and outdoor units. The units shall be factory assembled and only the refrigerant piping shall be carried out at the site. The noise level for the outdoor unit shall be less than 60 dbA The price shall include with all suitability of earthing as well specified electrical fittings in complete, with all accessories like scafoldings, safe loading, unloading in position, fixing the outdoor in line, level and plumb as directed by Engineer- in-charge, with necessary anti-vibration heavy duty pads, Nuts, bolts, fastners, etc. All ODU shall be coated with anti-corrosive coating to withstand wheathering effects for 5 years.
1
-
-
Supply, Installation, Testing, Erection and Commissioning of 40HP ( i.e. 20 HP # 2 Nos.) Condensing Unit. The Condensing Unit (Outdoor Units) shall comprise of Inverter Driven Compressor / Digital scroll Air Cooled condenser with R-410A .The Multiple Compressors offered shall have independent refrigerant circuit. Also Compressor shall cut-off automatically in part load condition. The unit shall have micro-processor controls. The outdoor units shall be installed on the space allotted in the drawings. Scope shall include all support for the indoor and outdoor units. The units shall be factory assembled and only the refrigerant piping shall be carried out at the site. The noise level for the outdoor unit shall be less than 60 dbA The price shall include with all suitability of earthing as well specified electrical fittings in complete, with all accessories like scafoldings, safe loading, unloading in position, fixing the outdoor in line, level and plumb as directed by Engineer- in-charge, with necessary anti-vibration heavy duty pads, Nuts, bolts, fastners, etc. All ODU shall be coated with anti-corrosive coating to withstand wheathering effects for 5 years.
1
-
-
Supply, Installation, Testing, Erection and Commissioning of 56 HP ( i.e. 20 HP # 2 Nos.,16 HP #1 Nos. ) Condensing Unit. The Condensing Unit (Outdoor Units) shall comprise of Inverter Driven Compressor / Digital scroll Air Cooled condenser with R-410A .The Multiple Compressors offered shall have independent refrigerant circuit. Also Compressor shall cut-off automatically in part load condition. The unit shall have micro-processor controls. The outdoor units shall be installed on the space allotted in the drawings. Scope shall include all support for the indoor and outdoor units. The units shall be factory assembled and only the refrigerant piping shall be carried out at the site. The noise level for the outdoor unit shall be less than 60 dbA The price shall include with all suitability of earthing as well specified electrical fittings in complete, with all accessories like scafoldings, safe loading, unloading in position, fixing the outdoor in line, level and plumb as directed by Engineer- in-charge, with necessary anti-vibration heavy duty pads, Nuts, bolts, fastners, etc. All ODU shall be coated with anti-corrosive coating to withstand wheathering effects for 5 years.
1
-
-
Supply, Installation, Testing, Erection and Commissioning of 58 HP ( i.e.20 HP # 2 Nos., 18 HP # 1 Nos.) Condensing Unit. The Condensing Unit (Outdoor Units) shall comprise of Inverter Driven Compressor / Digital scroll Air Cooled condenser with R-410A .The Multiple Compressors offered shall have independent refrigerant circuit. Also Compressor shall cut-off automatically in part load condition. The unit shall have micro-processor controls. The outdoor units shall be installed on the space allotted in the drawings. Scope shall include all support for the indoor and outdoor units. The units shall be factory assembled and only the refrigerant piping shall be carried out at the site. The noise level for the outdoor unit shall be less than 60 dbA The price shall include with all suitability of earthing as well specified electrical fittings in complete, with all accessories like scafoldings, safe loading, unloading in position, fixing the outdoor in line, level and plumb as directed by Engineer- in-charge, with necessary anti-vibration heavy duty pads, Nuts, bolts, fastners, etc. All ODU shall be coated with anti-corrosive coating to withstand wheathering effects for 5 years.
1
-
-
Supply, Installation, Testing, Erection and Commissioning of 36HP ( i.e. 18 HP # 2 Nos.) Condensing Unit. The Condensing Unit (Outdoor Units) shall comprise of Inverter Driven Compressor / Digital scroll Air Cooled condenser with R-410A .The Multiple Compressors offered shall have independent refrigerant circuit. Also Compressor shall cut-off automatically in part load condition. The unit shall have micro-processor controls. The outdoor units shall be installed on the space allotted in the drawings. Scope shall include all support for the indoor and outdoor units. The units shall be factory assembled and only the refrigerant piping shall be carried out at the site. The noise level for the outdoor unit shall be less than 60 dbA The price shall include with all suitability of earthing as well specified electrical fittings in complete, with all accessories like scafoldings, safe loading, unloading in position, fixing the outdoor in line, level and plumb as directed by Engineer- in-charge, with necessary anti-vibration heavy duty pads, Nuts, bolts, fastners, etc. All ODU shall be coated with anti-corrosive coating to withstand wheathering effects for 5 years.
2
-
-
Supply, Installation, Testing, Erection and Commissioning of 08HP ( i.e. 08HP # 1 Nos.) Condensing Unit. The Condensing Unit (Outdoor Units) shall comprise of Inverter Driven Compressor / Digital scroll Air Cooled condenser with R-410A .The Multiple Compressors offered shall have independent refrigerant circuit. Also Compressor shall cut-off automatically in part load condition. The unit shall have micro-processor controls. The outdoor units shall be installed on the space allotted in the drawings. Scope shall include all support for the indoor and outdoor units. The units shall be factory assembled and only the refrigerant piping shall be carried out at the site. The noise level for the outdoor unit shall be less than 60 dbA The price shall include with all suitability of earthing as well specified electrical fittings in complete, with all accessories like scafoldings, safe loading, unloading in position, fixing the outdoor in line, level and plumb as directed by Engineer- in-charge, with necessary anti-vibration heavy duty pads, Nuts, bolts, fastners, etc. All ODU shall be coated with anti-corrosive coating to withstand wheathering effects for 5 years.
1
-
-
In-door units (All indoor m/c's with density & population sensor, drain pump & Fresh Air intake Provision).
-
-
-
Supply, Installation, Testing, Erection and Commissioning of 0.8 TR Ceiling suspended 4-Way Cassette type indoor unit supplied air cooled Variable Refrigerant Flow / Volume System complete with individual cordless controller along with density & population sensor, drain pump & Fresh Air intake Provision company fitted assembled units. with all suitability of earthing as well specified electrical fittings in complete, with all accessories. The rates shall be inclusive of necessary scafoldings, safe loading, unloading in position, fixing, leveling and plumb as directed by Engineer- in-charge, with necessary Nuts, bolts, fastners, etc. ( Consider compact type unit i.e. 650mm x 650mm)
84
-
-
Supply, Installation, Testing, Erection and Commissioning of 1.10 TR Ceiling suspended 4-Way Cassette type indoor unit supplied air cooled Variable Refrigerant Flow / Volume System complete with individual cordless controller along with density & population sensor, drain pump & Fresh Air intake Provision company fitted assembled units. with all suitability of earthing as well specified electrical fittings in complete, with all accessories. The rates shall be inclusive of necessary scafoldings, safe loading, unloading in position, fixing, leveling and plumb as directed by Engineer- in-charge, with necessary Nuts, bolts, fastners, etc. ( Consider compact type unit i.e. 650mm x 650mm)
22
-
-
Supply, Installation, Testing, Erection and Commissioning of 1.33 TR Ceiling suspended 4-Way Cassette type indoor unit supplied air cooled Variable Refrigerant Flow / Volume System complete with individual cordless controller along with density & population sensor, drain pump & Fresh Air intake Provision company fitted assembled units. with all suitability of earthing as well specified electrical fittings in complete, with all accessories. The rates shall be inclusive of necessary scafoldings, safe loading, unloading in position, fixing, leveling and plumb as directed by Engineer- in-charge, with necessary Nuts, bolts, fastners, etc. ( Consider compact type unit i.e. 650mm x 650mm)
20
-
-
Supply, Installation, Testing, Erection and Commissioning of 1.65 TR Ceiling suspended 4-Way Cassette type indoor unit supplied air cooled Variable Refrigerant Flow / Volume System complete with individual cordless controller along with density & population sensor, drain pump & Fresh Air intake Provision company fitted assembled units. with all suitability of earthing as well specified electrical fittings in complete, with all accessories. The rates shall be inclusive of necessary scafoldings, safe loading, unloading in position, fixing, leveling and plumb as directed by Engineer- in-charge, with necessary Nuts, bolts, fastners, etc. ( Consider compact type unit i.e. 650mm x 650mm)
19
-
-
Supply, Installation, Testing, Erection and Commissioning of 2.00 TR Ceiling suspended 4-Way Cassette type indoor unit supplied air cooled Variable Refrigerant Flow / Volume System complete with individual cordless controller along with density & population sensor, drain pump & Fresh Air intake Provision company fitted assembled units. with all suitability of earthing as well specified electrical fittings in complete, with all accessories. The rates shall be inclusive of necessary scafoldings, safe loading, unloading in position, fixing, leveling and plumb as directed by Engineer- in-charge, with necessary Nuts, bolts, fastners, etc.
53
-
-
Supply, Installation, Testing, Erection and Commissioning of 2.65 TR Ceiling suspended 4-Way Cassette type indoor unit supplied air cooled Variable Refrigerant Flow / Volume System complete with individual cordless controller along with density & population sensor, drain pump & Fresh Air intake Provision company fitted assembled units. with all suitability of earthing as well specified electrical fittings in complete, with all accessories. The rates shall be inclusive of necessary scafoldings, safe loading, unloading in position, fixing, leveling and plumb as directed by Engineer- in-charge, with necessary Nuts, bolts, fastners, etc.
18
-
-
Supply, Installation, Testing, Erection and Commissioning of 3.20 TR Ceiling suspended 4-Way Cassette type indoor unit supplied air cooled Variable Refrigerant Flow / Volume System complete with individual cordless controller along with density & population sensor, drain pump & Fresh Air intake Provision company fitted assembled units. with all suitability of earthing as well specified electrical fittings in complete, with all accessories. The rates shall be inclusive of necessary scafoldings, safe loading, unloading in position, fixing, leveling and plumb as directed by Engineer- in-charge, with necessary Nuts, bolts, fastners, etc.
25
-
-
Supply, Installation, Testing, Erection and Commissioning of 4.00 TR Ceiling suspended 4-Way Cassette type indoor unit supplied air cooled Variable Refrigerant Flow / Volume System complete with individual cordless controller along with density & population sensor, drain pump & Fresh Air intake Provision company fitted assembled units. with all suitability of earthing as well specified electrical fittings in complete, with all accessories. The rates shall be inclusive of necessary scafoldings, safe loading, unloading in position, fixing, leveling and plumb as directed by Engineer- in-charge, with necessary Nuts, bolts, fastners, etc.
6
-
-
(All ceiling suspended units with factory fitted drain pumps is mandatory )
-
-
-
Supply, Installation, Testing, Erection and Commissioning of all refrigerent Joints in Pair with all suitability fittings in complete, with all necessary accessories. The rates shall be inclusive of necessary scafoldings, safe loading, unloading in position, leveling and plumb as directed by Engineer- in-charge, with necessary Nuts, bolts, fastners, etc.
236
-
-
Supply, Installation, Testing, Erection and Commissioning of commercial central VRF Digital LCD touch screen Central remote controller (INTELLIGENT ON/OFF Centralize CONTROLLER with interface ) for all indoor & outdoor machines compile with all necessary Accessories, Fitments and supports, inclusive of All Energy saving function.:- Permit / prohibit, Operational lock, Schedule operation, checking Gas amount, Night setback function, Automatic heat / cool change-over, Temperature limitation, Sliding temperature etc..
11
-
-
LOW SIDE AIR CONDITIONING WORK
-
-
-
Supply, installation, testing and commissioning of refrigerant liquid and Gas piping using eddy current free Hard Copper pipes and fittings like elbows, couplers, tee joints, brass fittings, "U" loops, expansion loops etc.
-
-
-
Supplying & erecting copper pipe suitable for refrigerationsystem having 22 guage thickness and inner dia / size 6 mm complete.
338
-
-
Supplying & erecting copper pipe suitable for refrigerationsystem having 22 guage thickness and inner dia / size 9 mm complete.
849
-
-
Supplying & erecting copper pipe suitable for refrigerationsystem having 22 guage thickness and inner dia / size 12 mm complete.
419
-
-
Supplying & erecting copper pipe suitable for refrigeration system having 22 guage thickness and inner dia / size 16 mm complete.
740
-
-
Supplying & erecting copper pipe suitable for refrigeration system having 22 gauge thickness and inner dia / size 19 mm complete.
471
-
-
Supplying & erecting copper pipe suitable for refrigeration system having 22 gauge thickness and inner dia / size 22 mm complete.
121
-
-
Supplying & erecting copper pipe suitable for refrigeration system having 22 guage thickness and inner dia / size 28 mm complete.
160
-
-
Supplying & erecting copper pipe suitable for refrigeration system having 22 guage thicknessand inner dia / size 35 mmcomplete.
125
-
-
Supplying & erecting copper pipe suitable for refrigeration system having22 guage thickness and inner dia / size 42 mmComplete.
148
-
-
Supply, installation, testing and commissioning of insulation of pipes using 19 mm thik and 6mm Diameter for SUPPLY & RETURN thick elastomeric closed cell Nitrile Rubber insulation with glass cloth material, self sticking tube having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occurring during testing / commissioning / first calendar year from handing over, including supply, labor, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item.
338
-
-
Supply, installation, testing and commissioning of insulation of pipes using 19 mm thik and 09mm Diameter for SUPPLY & RETURN thick elastomeric closed cell Nitrile Rubber insulation with glass cloth material, self sticking tube having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occurring during testing / commissioning / first calendar year from handing over, including supply, labor, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item.
849
-
-
Supply, installation, testing and commissioning of insulation of pipes using 19 mm thik and 12mm Diameter for SUPPLY & RETURN thick elastomeric closed cell Nitrile Rubber insulation with glass cloth material, self sticking tube having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occurring during testing / commissioning / first calendar year from handing over, including supply, labor, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item.
419
-
-
Supply, installation, testing and commissioning of insulation of pipes using 19 mm thik and 16mm Diameter for SUPPLY & RETURN thick elastomeric closed cell Nitrile Rubber insulation with glass cloth material, self sticking tube having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occurring during testing / commissioning / first calendar year from handing over, including supply, labor, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item.
740
-
-
Supply, installation, testing and commissioning of insulation of pipes using 19 mm thik and 19mm Diameter for SUPPLY & RETURN thick elastomeric closed cell Nitrile Rubber insulation with glass cloth material, self sticking tube having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occurring during testing / commissioning / first calendar year from handing over, including supply, labor, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item.
471
-
-
Supply, installation, testing and commissioning of insulation of pipes using 19 mm thik and 22mm Diameter for SUPPLY & RETURN thick elastomeric closed cell Nitrile Rubber insulation with glass cloth material, self sticking tube having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occurring during testing / commissioning / first calendar year from handing over, including supply, labor, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item.
121
-
-
Supply, installation, testing and commissioning of insulation of pipes using 19 mm thik and 28mm Diameter for SUPPLY & RETURN thick elastomeric closed cell Nitrile Rubber insulation with glass cloth material, self sticking tube having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occurring during testing / commissioning / first calendar year from handing over, including supply, labor, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item.
160
-
-
Supply, installation, testing and commissioning of insulation of pipes using 19 mm thik and 35mm Diameter for SUPPLY & RETURN thick elastomeric closed cell Nitrile Rubber insulation with glass cloth material, self sticking tube having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occurring during testing / commissioning / first calendar year from handing over, including supply, labor, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item.
125
-
-
Supply, installation, testing and commissioning of insulation of pipes using 19 mm thik and 42mm Diameter for SUPPLY & RETURN thick elastomeric closed cell Nitrile Rubber insulation with glass cloth material, self sticking tube having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occurring during testing / commissioning / first calendar year from handing over, including supply, labor, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item.
148
-
-
Providing & erecting Hot dipped Galvanised cover suitable for perforated type Cable tray manufactured from 18 swg i.e.1.2 mm thick GI sheet of300 mm width & 20 mm heightcomplete with necessary hardware in approved manner.
1686
-
-
Supplying, erecting & terminating PVC armouredcable 2 core 2.5 sq mm copper conductor continuous 5.48 sq mm i.e.12 SWG G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
4382
-
-
Supplying & laying Rigid PVC conduit 25 mm Dia for communication cable between indoor to ourdoor unit with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC, para no. 1.2.1
4382
-
-
Supply, installation, testing and commissioning of MS powder coating Structural Channel with TWO Coats of Red-oxide sections (i.e. 75 x 75 x 6 mm ) as per suitability for installing of VRF outdoor units duly epoxy coated / galvanized. Note: structural strength report to be attached during project handing over documents
2650
-
-
Supply, installation, testing, Commisioning of refrigerant charges along with SUPPLY & topping-up. Note: despite company dispatch the final topping up as per site requirment
206
-
-
AIR DISTRTIBUTION SYSTEM
-
-
-
Supply, Installation ,testing & commissioning of 24 G Factory fabricated G.I. sheet metal duct work with all necessary supports, fastners, nuts, bolts, washers, jointing & reinrforcement system etc as per approved shop drawing.
2038
-
-
Supply, Installation ,testing & commissioning of 22 G Factory fabricated G.I. sheet metal duct work with all necessary supports, fastners, nuts, bolts, washers, jointing & reinrforcement system etc as per approved shop drawing.
50
-
-
Supply, installation, testing and commissioning Aluminium powder coated duct type Volume Controller Damper for duct and grill.
10
-
-
Supply, installation, testing and commissioning of Extruded aluminum powder coated linear grill of required airflow angles including of all necessary supports ,fastners,etc. without VCD as per drawing specific (Note:- Size and colour to be approved Arch & Interior designer)
10
-
-
Supply, installation, testing and commissioning of Fusible link (Specially design assembly with brass end)operated UL listed fire damper design to withstand recommended temperature 70°C
5
-
-
Supplying & laying Rigid PVC conduit 16 SWG 32 mm Dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC, para no. 1.2.1 (for Drain Pipe)
760
-
-
Supplying & layingRigid PVC conduit 25 mm Dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC, para no. 1.2.1 (for Drain Pipe)
745
-
-
Supplying and erecting Elastomeric Nitrile rubber / foamtube type sleeves for over coating and insulating on provided PCP pipes having 9 mm thickness and inner diameter / sizes 32 mm For drain pipe
760
-
-
Supplying and erecting Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on providedPCP pipes s having 9 mm thickness and innerdiameter / sizes 22 mm for drain pipe
745
-
-
SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF MECHANICAL VENTILATION SYSTEM
-
-
-
Supply, installation, testing and commissioning of Silent Type Ceiling Mounted Mixed Flow Inline Exhaust / Fresh air fan with having capacity of 1650 CFM with 2 speed hi efficiency motor.Sound level should not exceed 22 DB with inlet air louvers and Bird mesh.
1
-
-
Supply, installation, testing and commissioning of Silent Type Ceiling Mounted Mixed Flow Inline Exhaust / Fresh air fan with having capacity of 800 CFM with 2 speed hi efficiency motor.Sound level should not exceed 22 DB with inlet air louvers and Bird mesh.
9
-
-
Supply, installation, testing and commissioning of Silent Type Ceiling Mounted Mixed Flow Inline Exhaust / Fresh air fan with having capacity of 1000 CFM with 2 speed hi efficiency motor.Sound level should not exceed 22 DB with inlet air louvers and Bird mesh.
1
-
-
Supply, installation, testing and commissioning of Silent Type Ceiling Mounted Mixed Flow Inline Exhaust / Fresh air fan with having capacity of 2350 CFM with 2 speed hi efficiency motor.Sound level should not exceed 22 DB with inlet air louvers and Bird mesh.
1
-
-
Supply, installation, testing and commissioning of Silent Type Ceiling Mounted Mixed Flow Inline Exhaust / Fresh air fan with having capacity of 1100 CFM with 2 speed hi efficiency motor.Sound level should not exceed 22 DB with inlet air louvers and Bird mesh.
2
-
-
Supply, installation, testing and commissioning of Silent Type Ceiling Mounted Mixed Flow Inline Exhaust / Fresh air fan with having capacity of 1300 CFM with 2 speed hi efficiency motor.Sound level should not exceed 22 DB with inlet air louvers and Bird mesh.
1
-
-
Supply, installation, testing and commissioning of Silent Type Ceiling Mounted Mixed Flow Inline Exhaust / Fresh air fan with having capacity of 2850 CFM with 2 speed hi efficiency motor.Sound level should not exceed 22 DB with inlet air louvers and Bird mesh.
1
-
-
Supply, installation, testing and commissioning of Silent Type Ceiling Mounted Mixed Flow Inline Exhaust / Fresh air fan with having capacity of 1850 CFM with 2 speed hi efficiency motor.Sound level should not exceed 22 DB with inlet air louvers and Bird mesh.
1
-
-
Supply, installation, testing and commissioning of Silent Type Ceiling Mounted Mixed Flow Inline Exhaust / Fresh air fan with having capacity of 2750 CFM with 2 speed hi efficiency motor.Sound level should not exceed 22 DB with inlet air louvers and Bird mesh.
1
-
-
Supply, installation, testing and commissioning of Silent Type Ceiling Mounted Mixed Flow Inline Exhaust / Fresh air fan with having capacity of 1600 CFM with 2 speed hi efficiency motor.Sound level should not exceed 22 DB with inlet air louvers and Bird mesh.
1
-
-
ACOUSTIC INSULATION
-
-
-
Supply installation, testing and commissioning of Ultra low density (11kg/mt3) 20 mm thick lightweight foam with excellent absorption capability, non fibrous three dimensional filigree structures safe in any environment with high sound absorption capability, flexible with open cell structure easy to cut and install and low flammability for all indoors above false ceiling along with necessary supports required for installation in line, level and plumb as instructed by ID, MEP consultant / PMC / Engineer- in-charge complete. OR (equivalent of CROWN 300 specifications.)
280
-
-
VENTILATION SYSTEM
-
-
-
Supply, receiving, storing, installation, testing & commissioning & Handing over of the following ventilation system.
-
-
-
Supply, installation, testing & commissioning of Axial Flow Fan with having capacity of 6000 CFM @ 25mm St. Pressure for Toilet Ventilation. with Double flanged casing is produced in mild steel or galvanised Steel, the impeller having manually adjustable pitch aero foil blades is made of PPG, PAG or Aluminium.The fan motore Shall be TEFC drive EFF-1 motor suitable for 215/415+ 10% volts, 1/3 phase 50 Hz AC supply.an static pressure shall be as indicated . Fan shall be with flexible fire proof flexible connection at inlet and outlet. Complete with all necessary accessories such as Mounting arrangement, frame and supports such as spring type anti-vibration hangers etc, complete as per drawings and specifications. i.e The bidder shall submit fan performance curves for all fans
2
-
-
Supply, installation, testing & commissioning of Axial Flow Fan with having capacity of 26000CFM @ 25mm St. Pressure for Lobby Pressurization. with Double flanged casing is produced in mild steel or galvanised Steel, the impeller having manually adjustable pitch aero foil blades is made of PPG, PAG or Aluminium.The fan motore Shall be TEFC drive EFF-1 motor suitable for 215/415+ 10% volts, 1/3 phase 50 Hz AC supply.an static pressure shall be as indicated . Fan shall be with flexible fire proof flexible connection at inlet and outlet. Complete with all necessary accessories such as Mounting arrangement, frame and supports such as spring type anti-vibration hangers etc, complete as per drawings and specifications. Fans shall be activated from fire signal from fire alarm system i.e The bidder shall submit fan performance curves for all fans
2
-
-
Supply, installation, testing & commissioning of Axial Flow Fan with having capacity of 9000 CFM @ 25mm St. Pressure for Lift Pressurization. with Double flanged casing is produced in mild steel or galvanised Steel, the impeller having manually adjustable pitch aerofoil blades is made of PPG, PAG or Aluminium.The fan motore Shall be TEFC drive EFF-1 motor suitable for 215/415+ 10% volts, 1/3 phase 50 Hz AC supply.an static pressure shall be as indicated . Fan shall be with flexible fire proof flexible connection at inlet and outlet. Complete with all necessary accessories such as Mounting arrangement, frame and supports such as spring type anti-vibration hangers etc, complete as per drawings and specifications. Fans shall be activated from fire signal from fire alarm system (The bidder shall submit fan performance curves for all fans)
5
-
-
Supply, installation, testing & commissioning of Axial Flow Fan with having capacity of 3400 CFM @12mm St. Pressure for Pump room ventilation. with Double flanged casing is produced in mild steel or galvanised Steel, the impeller having manually adjustable pitch aerofoil blades is made of PPG, PAG or Aluminium.The fan motore Shall be TEFC drive EFF-1 motor suitable for 215/415+ 10% volts, 1/3 phase 50 Hz AC supply.an static pressure shall be as indicated . Fan shall be with flexible fire proof flexible connection at inlet and outlet. Complete with all necessary accessories such as Mounting arrangement, frame and supports such as spring type anti-vibration hangers etc, complete as per drawings and specifications. Fans shall be activated from fire signal from fire alarm system (The bidder shall submit fan performance curves for all fans)
1
-
-
Supply, installation, testing & commissioning of Axial Flow Fan with having capacity of 500 CFM @ 12mm St. Pressure for electrical room ventilation. with Double flanged casing is produced in mild steel or galvanised Steel, the impeller having manually adjustable pitch aerofoil blades is made of PPG, PAG or Aluminium.The fan motore Shall be TEFC drive EFF-1 motor suitable for 215/415+ 10% volts, 1/3 phase 50 Hz AC supply.an static pressure shall be as indicated . Fan shall be with flexible fire proof flexible connection at inlet and outlet. Complete with all necessary accessories such as Mounting arrangement, frame and supports such as spring type anti-vibration hangers etc, complete as per drawings and specifications. Fans shall be activated from fire signal from fire alarm system i.e The bidder shall submit fan performance curves for all fans
1
-
-
Supply, installation, testing & commissioning of Axial Flow Fan with having capacity of 1850 CFM @ 25mm St. Pressure for Electrical room Ventilation. with Double flanged casing is produced in mild steel or galvanised Steel, the impeller having manually adjustable pitch aerofoil blades is made of PPG, PAG or Aluminium.The fan motore Shall be TEFC drive EFF-1 motor suitable for 215/415+ 10% volts, 1/3 phase 50 Hz AC supply.an static pressure shall be as indicated . Fan shall be with flexible fire proof flexible connection at inlet and outlet. Complete with all necessary accessories such as Mounting arrangement, frame and supports such as spring type anti-vibration hangers etc, complete as per drawings and specifications. Fans shall be activated from fire signal from fire alarm system (The bidder shall submit fan performance curves for all fans)
1
-
-
Supply, installation, testing & commissioning of AMCA Tube Axial Flow 15000 CFM @ 25mm St. Pressure for Basement Ventilation. Direct driven (refer drawing) Ceiling Mounted Type fans. Fan should be coupled with smoke venting Class H motor & tested for 300 Deg C @ 2 hrs. Fan RPM should be below 1000 RPM & Velocity below 12 M/S for low noise during normal operation .The Fan Would be bare with no outer casing.Fan should have BMS provision. the units shall be statically and dynamically balanced. all necessary supports, fastners, nuts, bolts, washers, jointing, reinrforcement & starter shall be in the scope of HVAC Contract. Power cable will be available up to starter panel.
2
-
-
Supply, installation, testing & commissioning of AMCA Tube Axial Flow 1000 CFM @ 20 mm St. Pressure for each floor exhaust. Direct driven (refer drawing) Ceiling Mounted Type fans. Fan should be coupled with smoke venting Class H motor & tested for 300 Deg C @ 2 hrs. Fan RPM should be below 1000 RPM & Velocity below 12 M/S for low noise during normal operation .The Fan Would be bare with no outer casing.Fan should have BMS provision. the units shall be statically and dynamically balanced. all necessary supports, fastners, nuts, bolts, washers, jointing, reinrforcement & starter shall be in the scope of HVAC Contract. Power cable will be available up to starter panel.
8
-
-
Supply, installation, testing & commissioning of AMCA Tube Axial Flow 1350 CFM @ 20 mm St. Pressure for each floor exhaust. Direct driven (refer drawing) Ceiling Mounted Type fans. Fan should be coupled with smoke venting Class H motor & tested for 300 Deg C @ 2 hrs. Fan RPM should be below 1000 RPM & Velocity below 12 M/S for low noise during normal operation .The Fan Would be bare with no outer casing.Fan should have BMS provision. the units shall be statically and dynamically balanced. all necessary supports, fastners, nuts, bolts, washers, jointing, reinrforcement & starter shall be in the scope of HVAC Contract. Power cable will be available up to starter panel.
1
-
-
Supply, installation, testing and commissioning of Axial Flow 5200 CMH / 10400 CMH type induce Jet Fan for Upper parking ventilation with tested & certified by AMCA (Air Movement & Control Association) for Sound & Air performance. Fan should be suitable for temperature of 300 Deg C for a rated duration of 120 minutes. Pls refer more details in Tende specs. Fan should be as per enclosed specs. CFD modulation is vendors scope of work to be done prior to final work order and procurement.
4
-
-
Supply, installation, testing and commissioning of CO Sensor(Vender Specific).
2
-
-
Supply, installation, testing and commissioning of Control Module housed within the electrical panel comprising of Programmable logic controller / hard wired integration with fan relays of Power panel for control of 4 Jet fans and 2 CO sensors input.
Jet fan system is a tailored made solution for basement cark park ventilation system. Control panel should be PLC based and shall be able to hook up with FIRE ALARM SYSTEM and the fan should be able to work as per the requirement during normal & FIRE mode the sensor shall be analog type detector with 4-20mA signal. Varying levels of CO should be able to detect by the sensor and simultaneously the number of JET fans shall be switched on.
1
-
-
Supply, installation, testing and commissioning of 2Cx1.5 Sq.mm Copper shielded cable laid in fire rated 16G GI conduit and clamped for co sensors inputs.
150
-
-
AIR DISTRTIBUTION SYSTEM
-
-
-
Supply, Installation ,testing & commissioning of 22 G Factory fabricated G.I. sheet metal duct work with all necessary supports, fastners, nuts, bolts, washers, jointing & reinrforcement system etc as per approved shop drawing.
395
-
-
Supply, installation, testing and commissioning Aluminium powder coated duct type Volume Controller Damper for duct and grill.
4
-
-
Supply, installation, testing and commissioning of Extruded aluminum powder coated linear grill of required airflow angles including all necessary supports ,fastners,etc without VCD as per drawing specific Note:- Size and colour to be approved Arch & Interior designer
4
-
-
AMC
-
-
-
ANNUAL MAINTENANCE CONTRACT (AMC)- i) FREE AMC- Contractor shall have to provide Comprehensive AMC (including providing labour & material on site) free of cost for all electromechanical systems including moving/stationary parts of equipments & machineries concurrent with the DLP for first two years. ii) CHARGABLE AMC- Contractor shall be paid against AMC (Service charge only) for 3rd, 4th & 5th year AMC concurrent with the DLP. Contractor shall quote for the same in his offer. (Material if any shall be supplied by the PMRDA during 3rd, 4th & 5th year of AMC).
iii) Civil work related to maintainance & repair of electromechanical system shall have to be carried out by the contractor at his cost (including material, labour, transport, lifting, staging, scaffolding and any other) during both the stages of AMC during entire DLP.
-
-
-
Annual Maintanance Contract of the HVAC system supplied, installed, commissioned by the contractor for 3rd,4th and 5th year in concurance with DLP.This will include Operation, routine servicing / regular maintanance, preventive maintanance of equipment and components and break down repairs as and when occured, ensuring the system does not remain out of service for a period of not more than 8 Hrs. in case of major breakdown and one Hr. in case of minor break down due to any unforeseen break down. The rate shall include for all labour, supervision ( including engineers / supervisors for round the clock as required to operate the system) and required for satisfactory operation & maintanance of the installation and system. Comprehensive AMC includes A) Serviceing and maintenance of supplied ACs, B) Repairing and replacement of any electrical parts such as fan, switches, MCBs. faulty Cables, pipe line leakage attend, Refilling of oil and gas and consumables etc
(Furnish separately the minimum man power supposed to be deployed along with the rates per each category)
-
-
-
For Third Year of DLP
1
-
-
For Fourth Year of DLP
1
-
-
For FifthYear of DLP
1
-
-
MISCELLANEOUS EQUIPMENTS AND MACHINERIES
-
-
-
ORGANIC WASTE CONVERTER (OWC)
-
-
-
Providing, fixing , testing and commissioning Organic waste converter (OWC) system : Supply, installation, testing & commissioning of Organic waste converter (OWC) system (Model Number- SM 15 + CD 125 ) of Smart Enviro system or approved equivalent make comprising of composting machine having capacity 15 kilogram/ batch (equivalent to 60 kilogram / hour) consist of shredder , mixer all wetted components made of SS 304 and curing drum made of LLDPE of waste handling capacity of 125 kilogram/day mounted on skid made out of MS fabricated structural frame, driven by geared motor through drive rollers, with inlet lid and outlet chute, aeration blower, odour control system , mist foggers inside the drum for moisture control etc. with required power connections including necessary civil works, foundations, framing, bolting, fabrication compltete as per manufacturer's specifictions, drawings, as directed by engineer-in-charge. The system shall be tested at manufacturer facility before procurement and at final location after installation at site by the contractor without any extra cost. The contractor shall obtain manufacturer's garuntee /warranty and furnished.
1
-
-
AMC
-
-
-
ANNUAL MAINTENANCE CONTRACT (AMC)- i) FREE AMC- Contractor shall have to provide Comprehensive AMC (including providing labour & material on site) free of cost for all electromechanical systems including moving/stationary parts of equipments & machineries concurrent with the DLP for first two years. ii) CHARGABLE AMC- Contractor shall be paid against AMC (Service charge only) for 3rd, 4th & 5th year AMC concurrent with the DLP. Contractor shall quote for the same in his offer. (Material if any shall be supplied by the PMRDA during 3rd, 4th & 5th year of AMC).
iii) Civil work related to maintainance & repair of electromechanical system shall have to be carried out by the contractor at his cost (including material, labour, transport, lifting, staging, scaffolding and any other) during both the stages of AMC during entire DLP.
-
-
-
Annual Maintanance Contract of the HVAC system supplied, installed, commissioned by the contractor for 3rd,4th and 5th year in concurance with DLP.This will include Operation, routine servicing / regular maintanance, preventive maintanance of equipment and components and break down repairs as and when occured, ensuring the system does not remain out of service for a period of not more than 8 Hrs. in case of major breakdown and one Hr. in case of minor break down due to any unforeseen break down. The rate shall include for all labour, supervision ( including engineers / supervisors for round the clock as required to operate the system) and required for satisfactory operation & maintanance of the installation and system. Comprehensive AMC includes A) Serviceing and maintenance of supplied ACs, B) Repairing and replacement of any electrical parts such as fan, switches, MCBs. faulty Cables, pipe line leakage attend, Refilling of oil and gas and consumables etc
(Furnish separately the minimum man power supposed to be deployed along with the rates per each category)
-
-
-
For Third Year of DLP
1
-
-
For Fourth Year of DLP
1
-
-
For FifthYear of DLP
1
-
-
Notes:
-
-
-
(1) Item for which no rate or price has been entered in will not be paid for by the Employer when executed and shall be deemed covered by
-
-
-
(2) Unit rates and prices shall be quoted by the bidder in Indian Rupee [ITB Clause 14.1].
-
-
-
(3) Where there is a discrepancy between the rates in figures and in words, the rate in words will govern. [ITB Clause 27.1 (a)].
-
-
-
(4) Where there is a discrepancy between the unit rate and the line item total resulting from multiplying the unit rate by quantity, the unit rate quoted shall govern [ITB Clause 27.l(b)].
-
-
-
(5) BOQ is in two parts i.e. Part-I - Work Portion and Part-II - Material Testing and Royalty Charges. Bidder should quote his rates and amount only in Part-I - Work Portion only.
-
-
-
(6) Rates for Testing Charges as mentioned in Part-II are fixed and not to be changed.
-
-
-
(7) The offer of the work will be compared on both i.e. Part-I and Part-II (BOQ, Testing Charges and Royalty)
-
-
-
Royalty and Material Testing Charges As per Part II (Fixed)
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements