Public Works Department Tender

Providing and laying in situ /Ready Mix cement concrete Mix-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions Etcetera including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish Indian Standards to be provided (Excluding reinforcement and structural steel) Etcetera complete, with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish Indian Standards to be provided and curing Etcetera complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish Indian Standards to be provided and curing Etcetera complete. (Excluding reinforcement and structural steel). with fully automatic microprocessor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Providing second class Burnt Brick masonry with conventional/ Indian Standards type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering Etcetera Complete.

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish Indian Standards to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete.With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre Layers including watering and compacting Etcetera complete.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 centimetre to 20 centimetre including watering and compaction etcetra complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting Etcetera complete.

Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap/ granite /quartzite/ gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetra complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetra complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Providing and laying Cast in situ/Ready Mixcement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish Indian Standards to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Providing and fixing in position Thermo Mechanical Treated - FE - 500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches Etcetera as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing second class Burnt Brick masonry with conventional/ Indian Standards type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding Etcetera Complete.

Providing second class Burnt Brick masonry with conventional/ Indian Standards type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 milimetre diameter / 2 hoop iron strips 25 milimetre X 1.6 milimetre placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering Etcetera complete.

Providing internal cement plaster 6 milimetre thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing Etcetera complete.

Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etcetra complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and fixing machine cut mirror polished 18 milimetre to 20 milimetre thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges Etcetera complete. Both side polish

Providing and laying vitrified mirror / glossy finish tiles having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming to Indian Standards 15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing Etcetera complete

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and confirming to Indian Standards 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing Etcetera complete.

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 milimetre to 20 milimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning Etcetera complete.

Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning Etcetera complete.

Providing and fixing Mix-40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to Indian Standards 65241983 having 6 milimetre dia bars 3 Numbers And strips @250 milimetre center to center and fixing in wall with 6 Numbers of hold fast of 12 milimetre dia bars 500 milimetre long including primer and oil painting etcetra, complete) frame size 60 milimetre x 125 milimetre

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 milimetre thick for door frame/ dado/ window boxing Etcetera On Cement Mortar 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, Etcetera complete.

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 Kilogram per One Running Metre with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 Kilogram per One Running Metre Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 Kilogram per Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 Kilogram per One Running Metre Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 Kilogram per Running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 Kilogram per Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etcetra, complete. With colour Anodising with box

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 milimetre x 1.22 milimetre box type, 5 milimetre thick sheet glass louvers, of approved quality Etcetera complete.

Providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish Etcetera complete.

Providing and fixing 30 milimetre thick SOLID PANEL Polynvinyl Cloride INTERNAL DOOR SHUTTER consisting of frame made out of Mild Steel tubes of 19 gauge thickness and size of 40 milimetre x 20 milimetre for stiles ,top, lock and bottom rails. Mild Steel frame shall have a coat of steel primers of approved make and manufacture. Mild Steel frame shall be covered with 5 milimetre thick heat molded Polynvinyl Cloride channel of size 30 x 100 milimetre forming stiles, and 5 milimetre thick, 125 milimetre wide Polynvinyl Cloride sheets for top rail, lock rail and bottom rail on either side, and 15mm (5 milimetre x 3) thick, 20 milimetre wide cross Polynvinyl Cloride sheet as gap insert for top rail and bottom rail. Paneling of 10 milimetre thick prelam Polynvinyl Cloride sheet to be fitted in the Mild Steel frame welded / sealed to the stiles and rails with 30 milimetre wide x 5 milimetre thick Polynvinyl Cloride sheet beading on either side, and joined together with solvent cement adhesive Etcetera An additional 5 milimetre thick Polynvinyl Cloride strip of 20 milimetre width Indian Standards to be stuck on the interior side of the C Channel using Polynvinyl Cloride solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineer in charge, manufacturer's specification and drawing.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in Cement Mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with Cement Mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimetre thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 milimetre x 300 milimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test Etcetera complete.

Providing water proof bedding for flooring of Bath and Water Closet 25 milimetre thick in Cement Mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test Etcetera complete.

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hours After applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of Superintending Engineer)

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning , preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days Etcetera complete.

Providing and fixing mild steel grill work for windows, ventilators, Etcetera 15 Kilogram per One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.

Providing and fixing on walls/ ceiling/ floor 15 milimetre diametre Chlorinated Polyvinyl Cloride pipe with necessary fittings, remaking good the demolished portion Etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Etcetera complete.

Providing and fixing on walls/ceiling/floor 20 milimetre diametre Chlorinated Polyvinyl Cloride pipe with necessary fittings, remaking good the demolished portion Etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Etcetera complete.

Providing and fixing on walls/ ceiling/ floor 25 milimetre diametre Chlorinated Polyvinyl Cloride pipe with necessary fittings, remaking good the demolished portion Etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Etcetera complete.

Providing, laying and fixing Polynvinyl Cloride pipe of 50 milimetre diametre with fittings such as bends, tees, reducers, clamps, Etcetera including necessary excavation, trench filling Etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Etcetera complete.

Providing, laying and fixing Polynvinyl Cloride pipe of 75 milimetre diametre with fittings such as bends, tees, reducers, clamps, Etcetera including necessary excavation, trench filling Etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Etcetera complete.

Providing, laying and fixing Polynvinyl Cloride pipe of 110 milimetre diametre with fittings such as bends, tees, reducers, clamps, Etcetera including necessary excavation, trench filling Etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Etcetera complete.

Providing and fixing 15 milimetre diametre screw down bib/ stop tap of brass including necessary socket union nut complete.

Providing and fixing 20 milimetre diametre screw down bib/ stop tap of brass including necessary socket union nut complete.

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with Polynvinyl Cloride 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 milimetre diameter Polynvinyl Cloride flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall.

Providing and fixing Orissa type white glazed earthenware 575 milimetre water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories Etcetera complete.

Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32 milimetre size of approved make including soil pipe, vent pipe up to outside face of wall ,100 milimetre diametre Galvanised Iron plug bend inlet pipe all fittings, cuttingand making good walls, floors Etcetera complete.

Providing and fixing white glazed earthenware Wash Hand Basin of 55 centimetre x 40 centimetre size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including Polynvinyl Cloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing Etcetera complete.

Providing and fixing 450 milimetre x 550 milimetre size superior type Belgium mirror with 16 milimetre diametre nickel plated towel rod Etcetera complete.

Providing and fixing 10 centimetre Polynvinyl Cloride nahani trap with grating Etcetera complete.

Providing and fixing 15 centimetre x 10 centimetre salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stoneware pipes, Brick Masonry, plastering from inside and Cast Iron lid cover of 75 Kilogram with lid and frame fixed in cement concrete.

Providing soak pit of size 120 centimetre x 120 centimetre x 120 centimetre including excavating and filling with brick-bats.

Providing and fixing High Density Polythylene container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres

Providing fine cement finish 1.5 milimetre thick over green plaster surface including scaffolding curing Etcetera complete.

Designing (aesthetically) and constructing Reinforced Cement Concrete elevated service reservoirs of following capacity with Reinforced Cement Concrete staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 Metre Centre to centre for ESR having capacity upto 500 cubic metre and not more than 6 metre center to center for ESRs having capacity above 500 cubic metre including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 Metre all labour and material charges including lowering, laying, erecting,, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental desing, providing and fixing accessories such as Mild Steel ladder, Cast Iron manhole frame and covers water level indicatiors, lightening conductor, Galvanised Iron pipe railing around walk" way and top slab, providing spiral stairecase from ground level to roof level and stainless steel ladder in container, Mild Steel grill gate of 2 Metre height with locking arrangement of approved design Brick Bat masonary chambers for all valves, ventilating shafts, providing and applying three coats of Acrylic emulsion with silicon additives paint to the structure including roof slab epoxy painting to internal surface and antitermite treatment for underground parts of the structure and giving satisfactory water tightness test as per Indian Standard code the job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-charge. Note : 1) Design of the structure shall be in accordance with relevant (IS 456-197, IS 875-1987, IS 3370-1965 or Revised) 2) The design shall satisfy the stipulations as per IS 1983-1984 and IS 13920/1993 for seismic force and IS 11682/1985 for RCC staging of overhead tanks. 3) For design having more than 6 columns, provision of internal bracing is obligatory. External bracing is also obligatary. 4) The entire structure shall be in M-250 mix only. However concrete in contact with water such as container, base slab, wall, roof slab and footing in water born area shall be in Mix-300 5) Plain round mild steel bars grade I confirming to IS 432 part I or high yield strength deformed bars confirming to IS 1786 or IS 1139 shall be used, grade Il mild steel bars will not be allowed 6) Irrespective of the type of foundation proposed in the design one set of bracing be provided at the ground level. 7) These rates include providing M.S.ladder for ESR's upto 2 lakh liters capacity and providing spiral staircase for ESR above 2 lakh lit. capacity. 8) Staging height will have to be designed with stresses of M-200 concrete. However all RCC construction should be done in m 250 except concrete in contact with water shall be designed & constructed in M300. 9) These rates are including the cost of uplift pressure if any and entire dewatering during execution. In case of water logging area where water is struch at shallow depth extra provision of dewatering shall be made as per site condition 10) All conditions given in the Member Secretary's Circular No.MJP/TS-1/350/1668 Dt.2.8.97 and MJP/S- 1/350/2127 Dt.13.7.99 shall be strictly followed and additional cost if any, due to these conditions is included in the rates mentioned below. 11) 75% part rate shall be payable for reinforcement cocrete and plastering items of containers of ESR till satisfactory hydraulic testing for water tightness in given and till that work shall be treated as incomplete. 12) The rates as indicated in the table are excluding the cost of pipes, specials, valves required for inlet, outlet, washout, overflow and bypass arrangements. The scope of the pipe assembly work shall be upto 5 M. beyond outside face of the outremost column 13) For ESR upto 500 cum capacity CIDF pipes upto 300 mm dia shall be provided and specials should be used. For ESR above 500 cum, M.S. pipes and M.S. specials (minimum 8mm thick uo to 500mm dia. & 10 mm thickness above 500 mm dia.) shall be used with proper anticorrosive epoxy treatment from inside and outside

Providing and supplying ISI standard welded DI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores unloading etc. complete as directed by Engineer-in-charge., A) 100 mm dia DIDF Sluice Valve

Providing and supplying ISI standard welded DI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores unloading etc. complete as directed by Engineer-in-charge., B) 150 mm dia DIDF Sluice Valve

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. A) 150 mm dia CIDF Sluice Valve

Providing and supplying ISI standard Cl flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete.

Laboratory testing Charges Crushed Metal : Water Absorption, Specific Gravity, Impact Value / Crushing Value

Sieve Analysis

Abrassion Value

Flakiness Index and Elongation Index

Stripping Value (for Bituminious Work)

Soundness

Sand : Silt Test

Cement : Standard Consistancy, Fineness, Specific Gravity, Setting Time (Initial and Final), Compressive Strength, Soundness

Cement Concrete M-40 : Compressive Strength (Cube Test)

Ceramic Tiles / Vitrified Tiles : Water Absorption, Fluxtural Strength, Resistant to Wear

Royalty for Sand

Royalty for Other Material