Public Works Department Tender

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.

Providing and fixing Reinforced Cement Concrete 200 meter Stone in Cement Concrete 1:4:8 as per Indian Road Congress standard including fixing in standard size  block including curing, painting lettering etc. complete.

Providing and fixing 1:2:4 ordinary kilometer stones in Cement Concrete 1:4:8 as per Indian Road Congress standard including fixing in standard size  block including curing, painting lettering etc. complete.

Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.

Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 millimeter thick including 1.5 Refractive index reflectorizing glass beads @ 250 gram per square meter .Thickness of 2.5 millimeter is exclusive of surface applied glass beads as per Indian Road Congress 35:2015. Initial Dry reflectivity RL shall be 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcandela per square meter per lux and Qd of 100 mcandela per square meter per lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both aCement Concreteording to Indian Road Congress 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per  direction of Engineer-in-charge and in aCement Concreteordance with applicable specifications.(Refer Ministry of Road Transport and Highways Clause 803 for technical Specification and  Performance for Indian Road Congress 35:2015).

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kilogram tested in aCement Concreteordance to American Society for Testing and materials D 4280 Type H and complying to Specifications of Category A of MORTH CIndian Road Congressular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 millimeter, 100 millimeter and 102 +/- 2 millimeter and with minimum reflective area of 13 square centimeter on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 millimeter and height not less than 30+/- 2 millimeter) from the body is to be a minimum value of 500 Kilogram. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recomillimeterendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.

Providing and fixing cautionary / warning sign board of size 60 centimeter. having shape of equilateral triangle with apex point upwards. prepared on 16 gauge Mild Steel sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of Mild Steel Angle iron post of size 50 x 50 x 5 millimeter of 3.65 meter long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 centimeter. fixing board and post with 2 Number high strength Galvanised Iron bolts and nuts of size 10 millimeter diameter and 20 millimeter long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimeter x 60 centimeter x 75 centimeter size etc.complete. 60 centimeter. equilateral triangle Mild Steel sheet with Engineering grade,

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20 meter x 0.90 meter size made out 18 gauge (1.25 milimeter) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on Mild Steel angle of size 35 x 35 x 3 milimeter frame with properly cross braced Mild Steel angles of size 35 x 35 x 3 milimeter duly painted including Two Mild Steel angle iron posts of size 65 x 65 x 6 milimeter, 3.65 meter long painted with alternate black and white bands of 25 centimeter width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 centimeter x 60 centimeter x 75 centimeter including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge