Public Works Department Tender

Providing uncoursed rubble masonry of trap or granite or quartzite or gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls or in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering et-cetra complete.

Providing and laying in situ or Ready Mix cement concrete Mix-20 of trap metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions et-cetra including bailing out water, Steel centering formwork, laying or pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) et-cetra complete, with fully automatic micro processor based Programmable Logic Controller without Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

Providing and laying Cast in situ or Ready Mix cement concrete Mix-20 of trap metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying or pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller without Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

Providing and laying Cast in situ or Ready Mix cement concrete Mix-20 of trap metal for Public Work Department beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying or pumping, compactionand roughening the surface if special finish is to be provided and curing et-cetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller without Supervisory control and data acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) et-cetra complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

Providing and laying Cast in situ or Ready Mix cement concrete in Mix-20 of trap metal for Public Work Department pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller without Supervisory control and data acquisition enabled reversible Drum Type mixer or concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

Providing and fixing in position Thermo Mechanically Treated - Ferrous - 500 bar reinforcement of various diameters for Public Work Department pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and erecting chain link fencing 1.6 Meter. height with Galvanized Iron chain link of size 50 x 50 milimeter, 8 gauge thick and fixed 75 milimeter above ground level on vertical Mild Steel Angles of 40 x 40 x 6 milimeter size, includind excavating pits for foundation and embedded in Cement Concrete block of 1:4:8 mix of size 450 x 450 x 670 milimeter at 1.75 Meter center to center with iron bar 16 milimeter diameter as hold fast including welding link with angle frame at 30 centimeter center to center with nuts and bolts and horizontal Mild Steel Angles at top and bottom of 25 x 25 x 5 milimeter size and vertical Mild Steel flat 35 x 5 milimeter and 25 x 5 milimeter horizontal including cross support of 40 x 40 x 6 milimeter angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 milimeter including 3 coats of oil painting et-cetra complete.

Providing and laying Cast in situ or Ready Mix cement concrete Mix-15 of trap metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood or steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand Vertical Shaft Impact Grade)

Providing internal cement plaster 12 milimeter thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete.

Providing patti or band 150 milimeter wide on plastered surface 12 milimeter to 15 milimeter thick in Cement Mortar 1:3 line and level including neat finishing scaffolding curing etc. complete.

Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade et-cetra complete. (weight 18 Kilogram. to 20 Kilogram Per Square meter)

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

Providing and fixing of retro- reflectorised informatory sign board rectangular or Square in shape having area less than 0.9 square meter made out of 4  milimeter aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per Indian Road Congress:67-2012 Table Number 8.3, supported with back support frame 25 milimeter x 25 milimeter x 3 milimeter, duly painted on back side with two coats of grey stove enamel paint and supported on one number mild steel angle iron post 75 milimeter x 75 milimeter x 6 milimeter, 3.5 meter long firmly fixed to the ground by means of properly designed foundation with Mix-25 grade cement concrete 45 centimeter x 45 centimeter x 60 centimeter, 60 centimeter below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 centimeter width including Galvanized Iron fixures and transportation etc.complete.The nut bolts of board with angle iron post or supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor or convertor issued for 4 milimeter aluminum composite material Class B

Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete.

Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50 meter including all lifts, laying in layers of 20 centimeter to 30 centimeter thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller to achieve not less than 97 per cent of standard proctor density et-cetra complete ( Material obtained from departmental Land)