Public Works Department Tender

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and fixing bituminous pad 25mm thick for expansion joints in retaining wall, compound wall etc. complete..

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

Providing & fixing Road Juction/information sign board of size 120 cm x 75 cm prepared on 14 gauge M.S. Sheet with angle iron frame of size 35 mm x 35 mm x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc cromate stoving primer and 2 coats each of Green/White back Ground and back side gray stove enamelled bounded with Red/White Retro /Letter/Numerals / Arrows coated with non peelable crystal clear proptective coat reating 100 percent reflection including two angle iron post of size 50 mm x 50mmx 5mm of 3.65 mm. mtr. Long inflated at bottom drilled on topwith two. Nos . Angle Iron cross bracing for vertical Angel post of size 50×50×5 mm of 2.35 mtr. Long painted in white and black bands of 25 cm. of size 10mm long sheet and angle iron post in one piece without joint fixing in ground with C.C. 1:4:8 block of size of size of size 60cm ×60cm×75cm as directed by engineer- in- charge etc. complete..