Public Works Department Tender

Supply and Installation of BWF, FIBA, FIVB and IHF approved Gerflor make Synthetic Sports Flooring.7.5mm Thick Shock absorption under EN 14808 standard not less than 25%. Ball bounce under EN 12235 standards not less than 90%. Abrasion resistance as per EN ISO 5470-1 shall be 350 mg.Impact Sound insulation as per EN ISO 717-2 shall be 18 dB. Thickness-7.5 mm. Width - 1.5 mtrs. Length- Between 15 - 20 mtrs. The floor surface consists of 100 pure vinyl wear layer of 2.1 mm thickness upper surface treated with protecsol to reduce skin burn and sanosol to avoid fungal growth. Double fiber glass grid for sound stability on floor. CXPTM HD double density foam backing with D-MAXTM ensuring highest possible resistance to indentation durability and energy return. The surface to be laid with adhesive as per manufacturers instruction over existing leveled surface. The Rolls will be joined with seamless hot welding. Game line marking to be done as per client’s requirement. BWF (Badminton World Federation). FIBA (Federation International Basketball Association). FIVB (Federation International Volleyball). IFF (International Futsal Federation) FIFA (Federation Internationale de Futsal Association) IHF (International Handball Federation).

Supply and Installation of FIBA, WSF, IHF, BWF Approved 100% solid hardwood pre-finished (factory finish including polish) Area-elastic press drayed Maple Wooden sports flooring with Pad ideal playing surfaces, floor system should be according to EN 14904 class A4 as per specifications and conditions mentioned below: Technical Specification:- Prefinished Hardwood flooring 22mm thick for each individual strip. Minimum width of 129mm and 1830mm in length jointed together with the help of tongue and groove on all four sides of all board Solid Hardwood floor board should be prefinished to eliminate the risk of human error when sanding and lacquering on site and easy and fast installation. Shock absorption: - 67 %, Vertical deformation: - 3.0 mm, Ball bounce: - 93 %, Friction: - ~ 85, Rolling Load: - 3500 N1, Point load: - 5500N ~ 550 kgs² Substructure:- Substructure of solid wood flooring shall consist of sleeper of Spruce or Pine 60 mm wide and cross-section of 45 mm and laid perpendicular to the main flooring planks at a spacing 411 mm centre to centre attached including 19mm rubber pads on concrete base beneath the flooring system as a vapour barrier between the concrete and wood floor. Vapour Barrier:- 0.2mm polyethylene membrane installed over the concrete base beneath the flooring system as a vapour barrier between the concrete and wood floor. Solid hardwood floor should be the approved by following Federations:- System should is passed according to EN 14904 class A4 Should have been used in Olympic World Championship, Asian Games Etc.

Supply and installation of Synthetic Sport Flooring Model No.: BWF Grade 3 (A-21145), Game: Badminton, Shock Absorption Rate: 53%, Pattern: Sand, Thickness: 4.5mm, Color: Grass Green / Red, Vertical Deformation: 2.3mm, PVC wear-resisting coat: Super Endurance and Wearing Strength, Fiber-glass reinforced layer: Make the Flooring Non-shrinkable and Long Service Life, PVC wear-resisting coat: Super Endurance and Wearing Strength, PVC Foaming Buffer Layer: Good Performance in Rebounding and Shock Absorbing, Natural Raw Material, Eco-friendly, Durable Using, BWF certified, Competition flooring PVC, Installation - Vinyl flooring will be installed using Adhesive, Also known as glue-down, this method involves attaching the vinyl to the subfloor with the help of adhesive grooving will be done after laying of vinyl flooring The Rolls of vinyl flooring will be joined with the help of 5mm pvc seamless welding road with the help of hot welding mechine .