Public Works Department Tender

Supply of Material for Construction of Internal Concrete Road At DHANODI Tq. Warud Dist. Amravati Under MREGS Converegence + 2515 Fund

Supply, installation and fixing of heritage architectural ornamental decorative light pole having provision to fix decorative double arm bracket with aluminium light fixture. Installation of same with foundation bolts of suitable size to gout it into specially designed 'RCC foundation, as shown in the enclosed drawing. The decorative bracket & light shall be fixed on the top of the pole. The details of pole, brackets & light are given below: Pole: The pole with brackets shall look 'like as shown in the drawing. It shall have all similar features as shown in the enclosed drawing/picture. The Heritage Pole of nearly 3370mm height. The pole shall be made to provide pleasing aesthetics. The decorative pole has ornamental base of nearly 670mm height & dia of 485mm.The decorative pole has ornamental base to be mounted on a heavy-duty mild steel base plate of suitable size 485x485x10mm. This mounting mild steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. The part above ornamental base having heavy M.S. hollow round pipe of outer diameter 193mm 00& on above 00 140 mm Pipe of pole with decorative cast iron design &cast aluminum diya shaped design. The diya shaped casting has provision of illumination which will look lighted diyas on pole. The pole should be provided with an inbuilt junction box, at the bottom-the inbuilt box should have a flush door of suitable size. The pole shall be similar to the once shown in the drawing. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%). Brackets: The architectural, custom design (cast iron+ M.S) pipe brackets details of the various portions are given in the drawing, which is of nearly 1625mm width, 980mm height With Tulsi Pot & which is made in combination of heavy-duty M.S pipe section nearly 40mm dia aesthetic cast iron elements as shown in drawing & provision of leakage-proof concealed wiring to maintain look of bracket. A cast aluminium decorative element provided on top of Tulsi Pot embossed for Aesthetics. The designs of cast iron to be welded to the brackets shall be similar to the once shown in the drawing. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%).Light Fixture: The ornamental aluminium casted decorative type light fittings of total height nearly 680mm and Width450mm having suitable Adopter/connector for fixing on required post; as shown in the enclosed drawing/picture. The fixtures have aluminium casted & spinning parts welded with decorative cast aluminium designs for better look. It shall have designed to illuminate large areas with its wide dispersion without affecting the environment. It shall have extra clear transparent acrylic Half Round doom light cover with stainless-steel fastening elements. The fixture having provision to fix complete with required power supply.