Public Works Department Tender

Supply of 4K/UHD HDMI Over HD Base T TX/RX with Control and PoE Receiver kit for HDMI transmission up to 230 feet (70 meters) over category cable with RS-232 and IR control plus Power over Ethernet capability. The kit should transmit video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. The kit should provide bidirectional extension of both 12 volt IR and RS-232 commands. The kit should be HDCP 2.2 compliant and supports EDID communication. Both transmitter and receiver feature quarter rack width metal enclosures for easy rack mounting with rear panel I/O ports for uncluttered wire management. It should provide integrator-friendly features including: IEEE standards-based PoE transmission for safety and compatibility; HDCP 2.2 compliant for meeting the latest copy protection requirements; rack-mountable form factor for accommodating four transmitters in a single 1U rack tray; power chaining for powering multiple devices from one power supply; and front mounted USB port for easy firmware updates.

Supply of high−performance, zero latency Audio / Video Streaming Transmitter ,4K@60Hz (4:4:4) video streaming transceiver for streaming via Ethernet over copper cable. Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface, providing lossless compression. Fully standard and compliant codec, enables compatibility with other software and hardware streaming platforms having a central point of management and enables creating multiple virtual matrices, video walls and multi–view configurations. HDCP2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support, High–Speed 10G Network Switch providing : multicast, jumbo frames, IGMP snooping and fast leave. Analog Audio Embedding , Bi–directional IR over IP — Control an IR device located on the decoder side from the encoder and vice versa., Bi–directional RS–232 over IP — Control a serial device located on the decoder side from the encoder and vice versa., Video Wall Support., Multiview Support, with 5 year onsite warranty

Supply of high−performance, zero latency Audio / Video Streaming Receiver ,4K@60Hz (4:4:4) video streaming transceiver for streaming via Ethernet over copper cable. Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface, providing lossless compression. Fully standard and compliant codec, enables compatibility with other software and hardware streaming platforms having a central point of management and enables creating multiple virtual matrices, video walls and multi–view configurations. HDCP2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support, High–Speed 10G Network Switch providing : multicast, jumbo frames, IGMP snooping and fast leave. Analog Audio Embedding , Bi–directional IR over IP — Control an IR device located on the decoder side from the encoder and vice versa., Bi–directional RS–232 over IP — Control a serial device located on the decoder side from the encoder and vice versa., Video Wall Support., Multiview Support, with 5 year onsite warranty

Supply of Front fill loudspeakers having Frequency Response (+ / -3dB) : 90Hz to 16kHz or better ; Nominal Dispersion : 90 H X 50 V or better ; Long Term Power Handling : 200 Watt or better ; Impedance : 8 ohm ; Sensitivity (SPL / W @ 1 Mtr) : 91 dB or better ; Max SPL @ 1 Mtr (Cont.) : 113 dB SPL or better ; Transformer tapping @ 70/100V : Yes ; Transducers : LF: min 1 x 8"

Supply of Rear fill loudspeakers having Frequency Response (+ / -3dB) : 85Hz to 16kHz or better ; Nominal Dispersion : 90 H X 50 V or better ; Long Term Power Handling : 350 Watt or better ; Impedance : 8 ohm ; Sensitivity (SPL / W @ 1 Mtr) : 95 dB or better ; Max SPL @ 1 Mtr (Cont.) : 120 dB SPL or better ; Transformer tapping @ 70/100V : Yes ; Transducers : LF: min 2 x 8" HF: min 1"

Supply of Stage monitor loudspeakers havingFrequency Response (+ / -3dB) : 75Hz to 18kHz or better ; Nominal Dispersion : 100 H X 60 V or better ; Long Term Power Handling : 300 Watt or better ; Impedance : 8 ohm ; Sensitivity (SPL / W @ 1 Mtr) : 95 dB or better ; Max SPL @ 1 Mtr (Cont.) : 121 dB SPL or better ; Transformer tapping @ 70/100V : Yes ; Transducers : LF: min 1 x 12" HF: min 3"

Supply of Green room & Control Room loudspeakers having Frequency response : 98 Hz to 16 kHz or better ; Nominal Dispersion : 120 H X 120 V or better ; Long Term Power Handling : 15 W or better ; Sensitivity (SPL / W @ 1 Mtr) : 87 dB SPL or better ; Max SPL @ 1 Mtr (Cont.) : 99 dB or better ; Transducer : 2.25" or better

Supply of Sennheiser E609 instrument microphone shall be a dynamic super-cardioid designed for miking guitar cabs face-on and ext remely close to the source. The microphone shall have a rugged metal body. The frequency response shall be 40 Hz – 15,000 Hz and the sensitivity (free field, no load) shall be 1.5 mV/Pa at 1 kHz. Nominal impedance shall be 350 Ω, with a min. terminating impedance of 1 kΩ. The microphone shall provide a 3-pin XLR connector. Dimensions shall be 55 x 34 x 134 mm (2.17" x 1.34" x 5.28"). Weight shall be 140 grams (4.94 oz)

Supply of Sennheiser E 901 High-quality pre-polarised condenser microphone with half-cardioid pickup pattern designed for use with kick drums. having a an unobtrusive, flat housing with an extremely rugged, step-resistant sound inlet basket and shall feature a rubber damping plate on the base, having an integrated preamp. Fequency response 20 Hz – 20,000 Hz ; sensitivity (free field, no load) 0.5 mV/Pa at 1 kHz. ominal impedance shall be less than 100 Ω, with a min. ; terminating impedance of 1 kΩ.; Maximum SPL: 154 dB. ; 48 V phantom power; gold-plated 3-pin XLR connector. ; Dimensions 126.5 x 105 x 26.5 mm (4.98" x 4.13" x 1.04"). Weight 550 grams (19.40 oz).

Supply of Sennheiser EWD 835S Handled Microphone Digital wireless eliminates noise, interference and static bursts ; UHF transmission greatly enhances range, reliability and scalability ; Mobile App streamlines setup and operation and eliminates complicated menus; Automated setup creates reliable connections with minimal time and effort ; Up to 2,240 selectable frequencies ; Transmission range: up to 100 m in an ideal environment (without obstacles) ; Lithium Ion battery pack delivers up to 12 hours of operation (up to 8 hours of operation with AA batteries); 56 MHz Bandwidth will allow for up to 90 channels; Preserves every detail of even the most dynamic per formances with 134 dB transmitter dynamic range

Supply of Sennheiser EWD ME2 Lapel Mic Digital wireless eliminates noise, interference and static bursts ; UHF transmission greatly enhances range, reliability and scalability ; Mobile App streamlines setup and operation and eliminates complicated menus; Automated setup creates reliable connections with minimal time and effort ; Up to 2,240 selectable frequencies ; Transmission range: up to 100 m in an ideal environment (without obstacles) ; Lithium Ion battery pack delivers up to 12 hours of operation (up to 8 hours of operation with AA batteries); 56 MHz Bandwidth will allow for up to 90 channels; Preserves every detail of even the most dynamic per formances with 134 dB transmitter dynamic range

Supply of Shure Beta 58A dynamic vocal microphone is precision-engineered for professional live sound reinforcement and studio recording applications. A tailored frequency response accentuates clarity of vocals and a tight supercardioid pattern insures high gain-before-feedback, maximum isolation from other sound sources and minimum off-axis tone coloration. Premier live performance microphone with Shure quality, ruggedness, and reliability Uniform supercardioid pick-up pattern for maximum gain before feedback and superior rejection of off-axis sound ; Tailored frequency response specifically shaped for vocals, with brightened midrange and bass roll off to control proximity effect ; Neodymium magnet for greater sensitivity and higher output ; Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration ; Dent-resistant steel mesh grille and enamel coated die-cast metal construction resist wear and abuse ; Effective built-in pop filter reduces undesirable wind and breath noise

Supply of Shure Beta 57A dynamic vocal microphone is precision-engineered for professional live sound reinforcement and studio recording applications. A tailored frequency response accentuates clarity of vocals and a tight supercardioid pattern insures high gain-before-feedback, maximum isolation from other sound sources and minimum off-axis tone coloration. Premier live performance microphone with Shure quality, ruggedness, and reliability Uniform supercardioid pick-up pattern for maximum gain before feedback and superior rejection of off-axis sound ; Tailored frequency response specifically shaped for vocals, with brightened midrange and bass roll off to control proximity effect ; Neodymium magnet for greater sensitivity and higher output ; Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration ; Dent-resistant steel mesh grille and enamel coated die-cast metal construction resist wear and abuse ; Effective built-in pop filter reduces undesirable wind and breath noise

Supply of Sennheiser E935 Dynamic cardioid vocal stage microphone specially designed to perform under pressure while cutting through the mix with its high output rugged metal body and a Shock-mounted capsule fitted with a hum compensating coil. Frequency response 40 Hz – 18,000 Hz ; Sensitivity (free field, no load) shall be 2.8 mV/Pa at 1 kHz. Nominal impedance shall be 350 Ω, with a min. terminating impedance of 1 kΩ.; The microphone shall provide a 3-pin XLR connector. Dimensions shall be 47 x 151 mm (1.85" x 5.94"). Weight shall be 355 grams (12.52 oz).

Supply of Sennheiser ME2 Universal clip-on microphone for a wide range of vocal and speech application ; Transducer principle pre-polarized condensor microphone ; Pick-up pattern omni-directional ; Sensitivity (free field, no load) (1 kHz) 17 mV/Pa ; Max. SPL at 1 kHz 130 dB ; Frequency response - 50 to 18,000 Hz; Equivalent noise level A-weighted- 32 dB

Supply of professional gooseneck microphone with base Pick-up pattern cardioid Frequency response 50 Hz - 20 kHz Acoustic principle gooseneck microphone (con denser) Output impedance @  1  kHz 100 Ω Sensitivity 15 mV/Pa Max. sound pressure level 130 dB @ 1 kHz 3 % Equivalent noise level 37 dB (CCIR) 26 dB (A) Power supply micro phone 12 V - 48 V phantom power (P 12 - P 48) Current consumption 3 mA Power supply signal light ring 12 - 30 V DC 1 - 18 mA green Connector XLR-5M Temperature Operation: Storage: 0 °C to 40 °C (32 °F to 104 °F)-25 °C to +70 °C (-13 °F to 158 °F) with base having Current consumption 3.7 mA Logic input high level input voltage 2.0  V low level input voltage 0.8  V Logic output high level output voltage 2.4  V low level output voltage 0.4  V Connector MIC IN: XLR-5F MIC OUT: XLR-3M 3x terminal Power supply 48 V phantom power (P 48) Weight approx. 1,200 g (42.33  oz) Dimensions (W x D x H) 120 x 170 x 43 mm (4.72" x 6.69" x 1.69") Temperature Operation: Storage:-10 °C to 50 °C (14 °F to 122 °F)-25 °C to 70 °C (-13 °F to 158 °F) Microphone activation modes PTT: PTM: ON/OFF: ON: Push to talk Push to mute Toggle on/off Permanently on or external logic control

Supply of Sennheiser EWD ME3 Head on Mic Digital wireless eliminates noise, interference and static bursts ; UHF transmission greatly enhances range, reliability and scalability ; Mobile App streamlines setup and operation and eliminates complicated menus ; Automated setup creates reliable connections with minimal time and effort ; Up to 2,240 selectable frequencies ; Transmission range: up to 100 m in an ideal environment (without obstacles) ; Lithium Ion battery pack delivers up to 12 hours of operation (up to 8 hours of operation with AA batteries) ; 56 MHz Bandwidth will allow for up to 90 channels ; Preserves every detail of even the most dynamic per formances with 134 dB transmitter dynamic range

Supply of Passive directional antenna for use with Evolution Wireless Digital systems. Frequency range 470 – 1075 MHz; Apex angle (-3 dB) approx. 100°; Front-to-back ratio 14 dB; Gain typ. 5 dBi; Impedance 50 Ω; Threads for tripod mounting; 3/8" and 5/8"; Dimensions 319 x 310 mm; Weight Approx. 1100 g (2.43 lbs); Operating temperature range-10 °C - +55 °C; (14 °F - 131 °F)

Supply of Active Antenna Splitter for use with Evolution Wireless Digital systems having the following specifications ; Frequency ranges: 470 – 694 MHz, 694 – 1075 MHz , 1350 – 1805 MHz ; Gain - in A – out A: 0 ± 1 dB ; IIP3 25 dBm; Impedance - 50 Ω; Reflection loss- 10 dB (all RF outputs) ; Operating voltage- DC +12 V from NT 12-35 CS power supply unit;

Supply of Digital Audio Mixer Midas M32 Digital Console for Live and Studio with 40 Input Channels, 32 Midas PRO Microphone Preamplifiers and 25 Mix Buses and Live Multitrack Recording with Stage Rack & Mixer Case; Input Processing Channels -32 Input Channels, 8 Aux Channels, 8 FX Return Channels ; Output Processing Channels - 16 , 16 aux buses, 6 matrices, main LRC 100 ; Internal Effects Engines (True Stereo / Mono)-16; Internal Show Automation (structured Cues / Snippets) - 500 / 100 ; Internal Total Recall Scenes (incl. Preamplifiers and Faders) - 100 ; Signal Processing - 40-Bit Floating Point ; A/D Conversion (8-channel, 96 kHz ready) - 114 dB Dynamic Range (A-weighted*) ; D/A Conversion (stereo, 96 kHz ready) - 120 dB Dynamic Range (A-weighted*) ; I/O Latency (Console Input to Output) - 0.8 ms ; Network Latency (Stage Box In Console Stage Box Out) - 1.1 ms

Supply of Digital Lighting console having 20 multi-function fixture faders with 3 different modes - Fixture, Group and Cue, 10 multi-cue Playback faders, which are legended on screen, Grand Master fader, 2 Direct DMX Outputs 5-Pin XLR: 2; Master Playback Faders: 10 ; Multi-Function Fixture Faders: 20 ; Bump Buttons: Yes ; Attribute Encoders: 4 ; Dedicated Hue/Saturation Encoders: Yes ; Inbuilt 9.7” Multi-touch Display: Yes ; External Monitor: 1920 x 1080 HDMI ; Inbuilt Wi-Fi: Yes Network Port: 1 ; USB Ports: 2 ; Audio Input: 1 ; Audio Output: 1; MIDI Ports in/out

Supply of Light cations.weight tripod alluminium Microphone stand with Long Arm, boom type & chrome plating with standard mouting accessories As completed

Supply Installation Testing & Commissioning of 32 Channel Digital StageBox providing 32 analogue inputs and 8 analogue line outputs, with 4 pairs of AES outputs, providing a total I/O capacity of 32 inputs and 16 outputs, with the Mini Stagebox 16R (2U) model providing 16 analogue inputs and 8 line outputs making a 16 x 8 matrix

Supply of Light weight tripod alluminium Microphone stand with short Arm, boom type & chrome plating As per the tender specifications.

supply of Light weight tripod alluminium Monitor stand with short Arm, boom type & chrome plating As per the tender specifications.

Supply of 1 x 2 HDMI distribution amplifier, Supported HDMI specification features include data rates up to 10.2 Gbps, Deep Color up to 12‑bit, 3D, and HD lossless audio formats, EDID Minder® automatically manages EDID communication between connected devices, HDCP compliant, Automatic input cable equalization to 50 feet (15 meters) when used with Extron HDMI Pro Series cable, Selectable output muting via RS‑232 with 5 year onsite warranty

Supply of 3-Way Cinema Screen Speaker System consisting of 4 X 15" low frequency high efficiency transducers in conjunction with a unique coaxial Mid-High frequency driver. The 90° X 40° large format pattern control horn exhibits uniform Mid-High frequency response throughout the cinema auditorium having the following Technical Parameters Frequency Response: - 45Hz to 20kHz ; Power Rating: - LF: 1600W AES, 6400W peak; ; MF: 150W AES, 1000W peak; ; HF: 80W AES, 450W peak ; Sensitivity: - LF: 104dB @ 1 W/1 m; ; MF/HF: 1 1 8 d B @ 1W/1m ; Maximum SPL: - LF: 136dB continuous, 142dB peak@ 1m; ; MF/HF: 139dB continuous, 145dB peak@ 1 m ; Nominal Impedance: - LF: 4 ohms + 4 ohms ; MF/HF: 80 ; Recommended Amplifier: - 1200W to 1800W@ 40 X 2 Ch. ; Low Frequency Driver: - 4 X 1 5 " (380 mm) weather resistant long excursion woofer ; Mid Frequency Driver: - 3.5" (90 mm) voice coil coaxial compression driver ; High Frequency Driver: - 1 .75" (44 mm) voice coil coaxial compression driver ; Crossover: - 500Hz Active, 6.5kHz Passive ; F i n i s h : - Black impact resistant structured coating ; Connector: - Push type binding post, cable upto 4 mm diameter ; Enclosure: - 1 8 mm MDF direct raditor vented enclosure ; Horn: - Large format 90' horizontal X 40' vertical constant directivity horn ; Dimension (H X W X D): - 1808 mm X 893 mm X 760 mm ( 7 1 . 1 " X 35. 1 " X 30") ; Net Weight: - 1 3 7 kg (302 lb) ; Packed Weight: - 148 kg (326 lb)

Supply of surround sound speakers designed to reproduce low frequency effects at a high sound pressure level with impact and dynamics. 1 x 18” (455 mm) woofer ; Uncompressed dynamic SPL ; Extended low frequency response ; Low turbulence aerodynamic vented enclosure ; High excursion capability ; High temperature stabilized 4” copper voice coil Low harmonic distortion haing the following Technical Specifications Frequency Response - 30Hz to 200Hz ; Power Rating - 1500W AES, 6000W peak ; Sensitivity - 98dB @ 1W/1m ; Maximum SPL - 129.5dB continuous, 135.5dB peak ; Nominal Impedance - 8Ω ; Transducers - 1 x 18” (455 mm) long throw weather resistant woofer ; Finish - Black impact resistant structured coating ; Connector - Push type binding post, cable upto 4 mm diameter ; Enclosure - 15 mm MDF direct radiator vented enclosure ; Subsonic Filter - 30Hz high pass 18dB/octave slope ; Dimensions (H x W x D) - 520 mm x 850 mm x 800 mm (20.4” x 33.4” x 31.4”) ; Net Weight - 70 kg (154 lb) ; Packed Weight - 73 kg (161 lb)

Supply of Digital Speaker processor with 8 analog inputs and 8 analog outputs, microphone or line 48V switch per input channel 24 bit A/D and D/A convertor 48kHz sampling rate 8th order filters for crossover GPIO Extensible Function ; Feedback suppressor in per input channel, Automatic Mixer & Matrix Mixer ; 31 PEQ per input and 10 PEQ per output ; USB, RS232/RS485 connector for centre control having following technical Specifications Input Impedance - Balanced: 11.5KΩ ; Output Impedance - Balanced: 150Ω ; PC Port - 1 USB (front panel), RS485, RS232, RJ45, GPIO (phoenix connector on back panel) ; CMRR - 55dBu at 1kHz ; Input Range - ≤+14dBu ; Input Signal - Line/Mic/Internal test signal generator ; Phantom Power - 48V per channel ; Frequency Response - 20Hz-20kHz(+/-0.5dB) Line, 20Hz-20kHz(+/-1.5dB) Mic ; S/N Ratio - 105dB Line, 95dB Mic ; THD - 0.01% Output=0dBu/1kHz. ; Crosstalk of Channels - 83dB(1kHz). ; Functions of Input Channels ; Input Mute - Mute/Unmute selection for each input channel ; Input Delay - Each input channel has a separate delay control, adjustable range of 0-20ms in increments of 0.10ms ; Input Polarity - In-phase(+) or Reversed phase(-). ; Input EQ - Each input channel has 31 EQ’s selectable to PEQ or Shelving or All pass filter ; Input Gain - -60dB ~ +15dB, step@0.1db. ; Noise Gate - Threshold: -120dBu ~ -60dBu, in 0.1dB steps; Attack: 1 ~ 2895ms, Release: 1 ~ 2895ms in 0.1ms step ; Functions of output channels ; Output Mute - Mute/Unmute selection for each output channel ; Output Selection - Each input channel can be routed to any output channel. ; Output Gain - -60dB ~ +15dB, step@0.1db ; Output Delay - Each output channel has a separate delay control, adjustable range of 0-60ms in increments of 0.10ms ; Output Polarity - In-phase(+) or Reversed phase(-). ; Crossover - Each output channel can be independently set as LPF or HPF. Filter type: Linkwitz-Riley, Bessel, Butterworth ; Crossover Frequency - 20Hz ~ 20kHz, Slope: 12dB/oct – 48dB/oct in increments of 6dB/oct ; Compression - Compressor present for each output channel. Adjustable parameters: Threshold value: -90dB ~ +21dB; step:0.1dB. ; Attack time - 1ms ~ 2895ms, step: 0.1ms. Release time: 1ms ~ 2895ms, step: 0.1ms, Ratio: 1~100, step: 0.1 ; Limiter - Limiter present for each output channel. Adjustable parameters: Threshold value: -90dB ~ +21dB; step:0.1dB. ; Release time - 1ms ~ 2895ms ; Output EQ - Each output channel has 10 EQ’s selectable to PEQ or Shelving or All pass filter ; Processor - 48kHz sampling frequency, 32-bit floating-point DSP. ; Display - 2 x 24 LCD ; Power - ≤25W ; Power Supply - AC 110V-220V 50/60Hz ; Dimensions (H x W x D) - 44 mm x 482 mm x 228 mm (1.8″ x 19″ x 9″) ; Net weight - 2.8 kg (6 lb) ; Gross weight - 3.8 kg (8 lb)

Supply of Dolby 12” Two-Way Surround Speaker with 12″ (300 mm) dual cone full range driver ; High sensitivity dual cone driver ; 90° dispersion ; Smooth on and off axis frequency response ; High sound pressure level ; Compact design having the following technical specifications Frequency Response - 100Hz to 18kHz ; Power Rating - 250W AES, 750W peak ; Sensitivity - 102dB @ 1W/1m ; Maximum SPL - 126dB continuous , 132dB peak @ 1m ; Nominal Impedance - 8Ω ; Transducers - 12″ (300 mm) dual cone full range driver ; Dispersion - 90° conical ; Finish - Black impact resistant structured coating ; Connector - Push type binding post, cable upto 4 mm diameter ; Enclosure - 15 mm MDF direct radiator vented enclosure ; Grill - Acoustically transparent black woven fabric ; Dimensions (H x W x D) - 470 mm x 380 mm x 279 mm (18.5” x 15” x 10.5”) ; Net Weight - 10 kg ( 22 lb) ; Packed Weight - 11.5 kg (25 lb)

Supply of four channel power amplifier designed and built for applications where sonic transparency and robust high power output capability are the prime criteria. High efficiency DPT Technology ; Premium heavy duty Toroidal Transformer ; Highly sensitive CMRR balanced input stage Ultra low-load output capacity ; Channel independent power, Signal and clip LEDs having the following technical specifications No.Of Channels - 4 ; Output Power(per channel) - 4 x 480 Watts @ 8Ω ; 4 x 820 Watts @ 4Ω ; 2 x 1380 Watts @ 8Ω in bridge mode ; 4Ω in bridge mode not recommended ; Frequency Response - 20Hz - 20kHz, +0/0.5dB ; Total Hormonic Distortion + Noise - 0.1% ; Signal to Noise Ratio - 110dB ; Damping factor - 300 ; Crosstalk - -60dB ; Slew Rate - 10V/us ; Ful Power Input Sensitivity - 1.5V ; Input Impedance - 20kΩ Balanced ; Voltage Gain - 32dB ; Cooling - Air flow from front to rear ; Protection - Fuseless short circuit protection, Ultrasonic and RF protection, Thermal protection ; Load Protection - Turn on delay, DC fault protection, ultrasonic limiting ; Power Requirement - 230V AC 50Hz, ± 10% ; Input Power - 1200 Watts ; Connectors ; Inputs - Balanced inputs XLR-F,Link XLR-M ; Outputs - NL4 Speakon ; Front panel - Power Switch, Level control, Power indicator, Signal indicator, Clip Protection ; Rear panel - Stereo/Bridge switches, Sensitivity selection switch VCL selection switch ; Dimentions/Weight - 89 mm x 482 mm x 471 mm (3.6” x 19” x 18.6”) ; Net Weight - 28.4kg (62.6 lb) ; Packed Weight - 32.2 kg (71 lb)

Supply of Dolby Cinema Audio Processor Upgradeable to full Dolby Atmos capability having the followingprocessing Capabilities :- Dolby Surround 7.1 and 5.1 playback from Cinema Server ; Dolby Digital® (AC-3) Dolby Digital Plus™ Dolby True HD Audio Dolby E ; Supported sample rates of: 44.1 kHz, 48 kHz and 96 kHz at 16, 20 and 24 bit ; AES67 or Blu-Link protocols for digital output ; Alternative Content Surround Processing High resolution, multi-rate EQ ; Internal crossover supports up to 3-way loudspeakers & The following I/O's :- 1 GB Ethernet (1 OOOBase-T) ; 1x- USB 3.0 ; 1 x HDMI 2.0 input ; 1 x HDMI 2.0 output (video pass-through) ; 2 x 8-channel AES-3 inputs (RJ-45) ; 2 x AES-3id Auxiliary Inputs (BNC Female) ; 1 x I RTA input (XLR Female); 2 Microphone x Non-Sync analog Input (RCA Female) ; 1 x Dolby Atmos Connect input (RJ45 ) ; BLU link return path only) ; 1 x Dolby Atmos Connect output (RJ45 ; 2 x 8-channel Analog outputs (DB25 Female); 1x HINI analog output (RCA Female) ; 1 x RS-232 Serial automation port (DB9 Male)

customised brackets for mounting of above speakers

Providing services for Audio calibration of the installed site.

Supply of FR XLPE insulated,shielded copper flexible 2 core 4 sq mm copper speaker cables laid in provided conduits

Supply of FR XLPE insulated,shielded copper flexible 2 core 6 sq mm copper speaker cables laid in provided conduits