Pradhan Mantri Gram Sadak Yojana Tender

Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. (Item No. 4.8 (2)(A)/ P.No. 23)

MDR 23 Pathantola Nimba road in Km 0.000 to 5.000 Taluka Goregaon

Kalimati Chanditola (MDR-13) road in Km 0.000 to 5.150 Taluka Goregaon

Construction of 50 mm thick Modified Penetration Macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg / sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

MDR 23 Pathantola Nimba road in Km 0.000 to 5.000 Taluka Goregaon

Kalimati Chanditola (MDR-13) road in Km 0.000 to 5.150 Taluka Goregaon

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg / sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (Above M.P.M.)

MDR 23 Pathantola Nimba road in Km 0.000 to 5.000 Taluka Goregaon

Kalimati Chanditola (MDR-13) road in Km 0.000 to 5.150 Taluka Goregaon

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat as per Technical Specification Clause 508. (excluding seal coat)

MDR 23 Pathantola Nimba road in Km 0.000 to 5.000 Taluka Goregaon

Kalimati Chanditola (MDR-13) road in Km 0.000 to 5.150 Taluka Goregaon

Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B, as per Technical Specification Clause 510

MDR 23 Pathantola Nimba road in Km 0.000 to 5.000 Taluka Goregaon

Kalimati Chanditola (MDR-13) road in Km 0.000 to 5.150 Taluka Goregaon

Construction of earthen shoulders as per Technical Specification Clause 407

MDR 23 Pathantola Nimba road in Km 0.000 to 5.000 Taluka Goregaon

Kalimati Chanditola (MDR-13) road in Km 0.000 to 5.150 Taluka Goregaon

Reinforced cement concrete M-15 grade 200m Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (I.No. 10.10 (III)

MDR 23 Pathantola Nimba road in Km 0.000 to 5.000 Taluka Goregaon

Kalimati Chanditola (MDR-13) road in Km 0.000 to 5.150 Taluka Goregaon

Reinforced cement concrete M-15 grade Ordinary Kilometer Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (I.No. 10.10 (II))

MDR 23 Pathantola Nimba road in Km 0.000 to 5.000 Taluka Goregaon

Kalimati Chanditola (MDR-13) road in Km 0.000 to 5.150 Taluka Goregaon

Providing and Fixing of Retro Reflectorised 900mm Cautionary sign boards made out of retro reflective sheeting of High Intensity prismatic grade conforming to IRC-67: 2012 & Type IV standards of ASTM D4956-09 specifications, fixed over 4mm thick ACP sheet supported with Back support frame of 25x25x3mm mild steel angle as approved , supported on a mild steel angle iron post 65 mm X 65 mm X 6 mm - 3.5 mtr height, firmly fixed to the ground by means of properly designed foundation with M20 grade cement concrete 45 cm X 45 cm X 60 cm , 60 cm below ground level as per approved drawing. Both border & background shall be retro reflective as per Type IV standards. 7 years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor(Bottom of the board shall be at least 2.6 mtr. above ground level) Specification: IRC 67:2012. There shall be a stamp behind the ACP sheet carrying the name of the supplier, Name of sheeting Manufacturer, Type of retro reflective sheeting, Installation month & year, Warranty period for retro reflective sheeting. (SoR 2019-20, Item No. 10.2 (B)/ P.No. 39)

MDR 23 Pathantola Nimba road in Km 0.000 to 5.000 Taluka Goregaon

Kalimati Chanditola (MDR-13) road in Km 0.000 to 5.150 Taluka Goregaon

1700 specifications (Refer Circuler no. NRRDA-P013 (11)/ 3/2019-Dir (Tech) dated 02.12.2019). Printing PMGSY Logo Project description on Class A or Class B type retro reflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IRC 67-2012. The inks used for printing shall be eco friendly with VOC emissions complying to UL 2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5 years & 7 years for Class A and Class B sheeting respectively for traffic colors. All the section of the frame and posts shall be painted with primer and two coats of epoxy paint. The design, painting and lettering shall be done as per the PMGSY Signage Guidelines Fig.2 and as directed by Engineer-In-charge. . A warranty for 5 / 7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor. (SoR 2019-20, Item No. 10.21 (A) / P.No. 42) Project Information Board

MDR 23 Pathantola Nimba road in Km 0.000 to 5.000 Taluka Goregaon

Kalimati Chanditola (MDR-13) road in Km 0.000 to 5.150 Taluka Goregaon