Pradhan Mantri Gram Sadak Yojana Tender

Water Bound Macadam with crushable screening) Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. 1) MDR-13 (Tekamandwa) To Dhondamandwa Road Ta Korpana Dist Chandrapur

2) T09-MSH-10 Kalamana Chincholi Sakhri Pauni Road Ta Rajura Dist Chandrapur

3) T13- Pardi Rupapeth Khadki Mandwa Channai Kanhalgaon Tambadi Jewara Road Ta Korpana Dist Chandrapur

Construction of Earthen Shoulders as per Technical Specification Clause 407 1) MDR-13 (Tekamandwa) To Dhondamandwa Road Ta Korpana Dist Chandrapur

2) T09-MSH-10 Kalamana Chincholi Sakhri Pauni Road Ta Rajura Dist Chandrapur

3) T13- Pardi Rupapeth Khadki Mandwa Channai Kanhalgaon Tambadi Jewara Road Ta Korpana Dist Chandrapur

Tack Coat(Below PMC)-Providing and applying tack coat with bitumen emulsion(RS-1) using emulsion distributor at the rate of 0,25 to 0.30 kg/sqm on the prepared bituminous surface cleaned with hydraullic broom as per technical specification clause 503 1) MDR-13 (Tekamandwa) To Dhondamandwa Road Ta Korpana Dist Chandrapur

2) T09-MSH-10 Kalamana Chincholi Sakhri Pauni Road Ta Rajura Dist Chandrapur

3) T13- Pardi Rupapeth Khadki Mandwa Channai Kanhalgaon Tambadi Jewara Road Ta Korpana Dist Chandrapur

Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.1) MDR-13 (Tekamandwa) To Dhondamandwa Road Ta Korpana Dist Chandrapur

2) T09-MSH-10 Kalamana Chincholi Sakhri Pauni Road Ta Rajura Dist Chandrapur

3) T13- Pardi Rupapeth Khadki Mandwa Channai Kanhalgaon Tambadi Jewara Road Ta Korpana Dist Chandrapur

Tack Coat(Below PMC)-Providing and applying tack coat with bitumen emulsion(RS-1) using emulsion distributor at the rate of 0,20 to 0.25kg/sqm on the prepared bituminous surface cleaned with hydraullic broom as per technical specification clause 503 1) MDR-13 (Tekamandwa) To Dhondamandwa Road Ta Korpana Dist Chandrapur

2) T09-MSH-10 Kalamana Chincholi Sakhri Pauni Road Ta Rajura Dist Chandrapur

3) T13- Pardi Rupapeth Khadki Mandwa Channai Kanhalgaon Tambadi Jewara Road Ta Korpana Dist Chandrapur

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level by paver finisher to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. 1) MDR-13 (Tekamandwa) To Dhondamandwa Road Ta Korpana Dist Chandrapur

2) T09-MSH-10 Kalamana Chincholi Sakhri Pauni Road Ta Rajura Dist Chandrapur

3) T13- Pardi Rupapeth Khadki Mandwa Channai Kanhalgaon Tambadi Jewara Road Ta Korpana Dist Chandrapur

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 1) MDR-13 (Tekamandwa) To Dhondamandwa Road Ta Korpana Dist Chandrapur

2) T09-MSH-10 Kalamana Chincholi Sakhri Pauni Road Ta Rajura Dist Chandrapur

3) T13- Pardi Rupapeth Khadki Mandwa Channai Kanhalgaon Tambadi Jewara Road Ta Korpana Dist Chandrapur

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 1) MDR-13 (Tekamandwa) To Dhondamandwa Road Ta Korpana Dist Chandrapur

3) T13- Pardi Rupapeth Khadki Mandwa Channai Kanhalgaon Tambadi Jewara Road Ta Korpana Dist Chandrapur

2) T09-MSH-10 Kalamana Chincholi Sakhri Pauni Road Ta Rajura Dist Chandrapur

Reinforced cement concrete M15 grade 5th kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 17033) T13- Pardi Rupapeth Khadki Mandwa Channai Kanhalgaon Tambadi Jewara Road Ta Korpana Dist Chandrapur

Reinforced cement concrete M15 grade 200 stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 200 meter stone 1) MDR-13 (Tekamandwa) To Dhondamandwa Road Ta Korpana Dist Chandrapur

2) T09-MSH-10 Kalamana Chincholi Sakhri Pauni Road Ta Rajura Dist Chandrapur

3) T13- Pardi Rupapeth Khadki Mandwa Channai Kanhalgaon Tambadi Jewara Road Ta Korpana Dist Chandrapur

Providing and fixing Semi reflective Cautionery, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS sheet duly stove white colour in front and grey colour on back with red reflective border of 65mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural roads of required shade and colour supported and welded on 47mm *47mm *12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450*450*600mm, 600mm below ground level as per approved drawing Clause 1701.2.2 Village Name Board 1) MDR-13 (Tekamandwa) To Dhondamandwa Road Ta Korpana Dist Chandrapur

2) T09-MSH-10 Kalamana Chincholi Sakhri Pauni Road Ta Rajura Dist Chandrapur

3) T13- Pardi Rupapeth Khadki Mandwa Channai Kanhalgaon Tambadi Jewara Road Ta Korpana Dist Chandrapur

Providing and fixing Semi reflective Cautionery, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS sheet duly stove white colour in front and grey colour on back with red reflective border of 65mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural roads of required shade and colour supported and welded on 47mm *47mm *12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450*450*600mm, 600mm below ground level as per approved drawing Clause 1701.2.2 600 mm Equilatral and Triangle 1) MDR-13 (Tekamandwa) To Dhondamandwa Road Ta Korpana Dist Chandrapur

2) T09-MSH-10 Kalamana Chincholi Sakhri Pauni Road Ta Rajura Dist Chandrapur

3) T13- Pardi Rupapeth Khadki Mandwa Channai Kanhalgaon Tambadi Jewara Road Ta Korpana Dist Chandrapur

Sign Board of PMGSY Project Information : Providing and fixing of typical retro reflective PMGSY Project informatory sign board with Logo as per section1700 of MORD specifications and latest PMGSY Signage Manual / Circuler and drawing. The board will be a composite unit consisting of Three Plates ACP (Aluminum Composite Panel), material specificaitons as per clause 17001.3. The top most plate will be of 3mm ACP in diamond shape of 600x600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges. The middle 4mm ACP plate of will be 1200x150mm size riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges. The main 4mm ACP lower most plate will be 1500mmx600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size. Riveting of all the sheets over angle and flat iron frame will be done neatly to have plain surface on one side. The angle iron frame of lower most plate and flat iron frame of the middle plate will be welded to two nos. 75mm x75mm x 12 swg sheet tubes posts placed at 1125mm apart centre to centre. the top of the middle plate will be flushed with the top of 75mm dia medium steel tube posts and these posts will be embeded in cement concrete M15 grade block of 450x450x600mm below ground level. The height of the bottom of the lower plate will be 1200mm from normal ground level and the bottom of the middle plate will be 100mm above the top level of the lower most plate. the diamond shaped plate 1700 specifications (Refer Circuler no. NRRDA-P013 (11)/ 3/2019-Dir (Tech) dated 02.12.2019). Printing PMGSY Logo Project description on Class A or Class B type retro reflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IRC 67-2012. The inks used for printing shall be eco friendly with VOC emissions complying to UL 2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5 years & 7 years for Class A and Class B sheeting respectively for traffic colors. All the section of the frame and posts shall be painted with primer and two coats of epoxy paint. The design, painting and lettering shall be done as per the PMGSY Signage Guidelines Fig.2 and as directed by Engineer-In-charge. . A warranty for 5 / 7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor. 1) MDR-13 (Tekamandwa) To Dhondamandwa Road Ta Korpana Dist Chandrapur

2) T09-MSH-10 Kalamana Chincholi Sakhri Pauni Road Ta Rajura Dist Chandrapur

3) T13- Pardi Rupapeth Khadki Mandwa Channai Kanhalgaon Tambadi Jewara Road Ta Korpana Dist Chandrapur