Pradhan Mantri Gram Sadak Yojana Tender

2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Water Bound Macadam with crushable screening) Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. (Item No. 4.8 (2) (A) / Pa. No. 23) 2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Tack Coat(Below PMC)-Providing and applying tack coat with bitumen emulsion(RS-1) using emulsion distributor at the rate of 0,25 to 0.30 kg/sqm on the prepared bituminous surface cleaned with hydraullic broom as per technical specification clause 503 ( I.No.5.2 (ii) / P.No. 27 )1) ODR-83(Saradpar) To Bamni Road Ta.chimur

2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. (Item No. 5.5 (A) / (I) Pa.no.28 1) ODR-83(Saradpar) To Bamni Road Ta.chimur

2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Tack Coat(Below PMC)-Providing and applying tack coat with bitumen emulsion(RS-1) using emulsion distributor at the rate of 0,20 to 0.25kg/sqm on the prepared bituminous surface cleaned with hydraullic broom as per technical specification clause 503 ( I.No.5.2 (i) / P.No. 27 ) 1) ODR-83(Saradpar) To Bamni Road Ta.chimur

2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level by paver finisher to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. ( Item No. 5.9 case (II)(II)) Pa.No.30 1) ODR-83(Saradpar) To Bamni Road Ta.chimur

2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 (Item No. 5.12(A) Csae-(2)Type B) Pa.no.33 1) ODR-83(Saradpar) To Bamni Road Ta.chimur

2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (I.No.10.10 (i & ii) / P.No. 41 ) 1) ODR-83(Saradpar) To Bamni Road Ta.chimur

2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Reinforced cement concrete M15 grade 200 stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (I.No.10.10(iii) / P.No. 41 ) 200 meter stone 1) ODR-83(Saradpar) To Bamni Road Ta.chimur

2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Providing and fixing Semi reflective Cautionery, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS sheet duly stove white colour in front and grey colour on back with red reflective border of 65mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural roads of required shade and colour supported and welded on 47mm *47mm *12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450*450*600mm, 600mm below ground level as per approved drawing Clause 1701.2.2 (Item No.10.2 / P.No 39) Village Name Board 1) ODR-83(Saradpar) To Bamni Road Ta.chimur

2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Providing and fixing Semi reflective Cautionery, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS sheet duly stove white colour in front and grey colour on back with red reflective border of 65mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural roads of required shade and colour supported and welded on 47mm *47mm *12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450*450*600mm, 600mm below ground level as per approved drawing Clause 1701.2.2 (Item No.10.2 / P.No 39) 600 mm Equilatral and Triangle 1) ODR-83(Saradpar) To Bamni Road Ta.chimur

2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Sign Board of PMGSY Project Information : Providing and fixing of typical retro reflective PMGSY Project informatory sign board with Logo as per section1700 of MORD specifications and latest PMGSY Signage Manual / Circuler and drawing. The board will be a composite unit consisting of Three Plates ACP (Aluminum Composite Panel), material specificaitons as per clause 17001.3. The top most plate will be of 3mm ACP in diamond shape of 600x600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges. The middle 4mm ACP plate of will be 1200x150mm size riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges. The main 4mm ACP lower most plate will be 1500mmx600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size. Riveting of all the sheets over angle and flat iron frame will be done neatly to have plain surface on one side. The angle iron frame of lower most plate and flat iron frame of the middle plate will be welded to two nos. 75mm x75mm x 12 swg sheet tubes posts placed at 1125mm apart centre to centre. the top of the middle plate will be flushed with the top of 75mm dia medium steel tube posts and these posts will be embeded in cement concrete M15 grade block of 450x450x600mm below ground level. The height of the bottom of the lower plate will be 1200mm from normal ground level and the bottom of the middle plate will be 100mm above the top level of the lower most plate. the diamond shaped plate 1700 specifications (Refer Circuler no. NRRDA-P013 (11)/ 3/2019-Dir (Tech) dated 02.12.2019). Printing PMGSY Logo Project description on Class A or Class B type retro reflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IRC 67-2012. The inks used for printing shall be eco friendly with VOC emissions complying to UL 2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5 years & 7 years for Class A and Class B sheeting respectively for traffic colors. All the section of the frame and posts shall be painted with primer and two coats of epoxy paint. The design, painting and lettering shall be done as per the PMGSY Signage Guidelines Fig.2 and as directed by Engineer-In-charge. . A warranty for 5 / 7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor. (Item No. 10.21 (A) / P.No. 42) 1) ODR-83(Saradpar) To Bamni Road Ta.chimur

2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material (Item No. 9.1) 2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. (As per PWD SOR 22-23) )Item No. 21.40)) 2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Plain cement concrete Grade M-15 in substructure complete as per drawings and technical specifications Clause 802, 804, 805, 806, 807, 1202 and 1204 (Sr. No. 12.5 (I) (i)) 2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (As per PWD SOR 22-23) )Sr. No. 11.09) 600 MM Dia) 2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 (Sr. No. 12.9) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Providing and laying cement concrete wearing course M-30 grade excluding reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 (Sr. No. 13.5) 2) Girsawali Ashi Chikani (Rly) Road Ta.Warora

Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202( Sr.No. 13.3) 2) Girsawali Ashi Chikani (Rly) Road Ta.Warora