Pradhan Mantri Gram Sadak Yojana Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Pradhan Mantri Gram Sadak Yojana - PMGSY Tender
Civil And Construction
Road Construction
Eprocure
Opening Date19 Jan 2024
Closing Date15 Mar 2024
Tender Amount₹ 7,26,81,160
Costs
EMD
₹ 3,63,406Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CEMAH_131449_3Bid Award Id
ViewTender No
CE-MRRDASE-6 KONKANEE-SindhudurgTender Authority
Pradhan Mantri Gram Sadak Yojana ViewPurchaser Address
-Website
http://http://omms.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3
8586.53
480759
55.99
... More
Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with a lift upto 1.5 m and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5
1515.27
568877
375.43
... More
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacting with vibratory roller to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 Construction of Embankment with Material Obtained from Roadway Cutting
8214.11
592730
72.16
... More
Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical specification 301.5 Construction of Embankment with Material Obtained from Borrow Pits
100
38793
387.93
... More
Providing & Laying Coir-Geotextile in embankment in side slope layer including all fixing laying fixture etc.
4099.2
512400
125
... More
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.Construction of earthen shoulders with Material Available from Borrow Pit
3858.75
1460421
378.47
... More
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (II) For Grading I Material Granular sub-base with Well Graded Material(Table 400.1)
1927.72
3743767
1942.07
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. .WBM Grading-II (Crushable Screenings)
969.81
1960500
2021.53
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. WBM Grading III (Stone Screening)
969.81
2231678
2301.15
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
12930.75
965668
74.68
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
12930.75
162280
12.55
... More
Providing, laying and rolling of close-graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.9 mm (TypeA) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 50 , Use Type B
13545.15
2831207
209.02
... More
Providing and fixing Cautionary /Warning sign boards in aluminum sheet bonded with white retroreflective sheeting of ClassB (Type IV High intensity micro-prismatic grade sheeting IP )having pressure sensitive /heat activated adhesive retoreflective specified background, border and back side retoreflctive symbols,letters,numerals,arrow as per IRC: 67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no.of M.S.angle iron post of size 65mm X65mm X6mm ,3.45 m long,duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60 cmX 60cmX 75cm including transportation etc;complete.Class B (Type IV High intensity micro-prismatic grade sheeting-HIP )shall have 7years written warranty from the manufacturer and authorised distributor /convertor issued for field performance including the screenprinted areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 600 mm Equilateral triangle
15
57705
3847
... More
Providing and fixing Cautionary /Warning sign boards in aluminum sheet bonded with white retroreflective sheeting of ClassB (Type IV High intensity micro-prismatic grade sheeting IP )having pressure sensitive /heat activated adhesive retoreflective specified background, border and back side retoreflctive symbols,letters,numerals,arrow as per IRC: 67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no.of M.S.angle iron post of size 65mm X65mm X6mm ,3.45 m long,duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60 cmX 60cmX 75cm including transportation etc;complete.Class B (Type IV High intensity micro-prismatic grade sheeting-HIP )shall have 7years written warranty from the manufacturer and authorised distributor /convertor issued for field performance including the screenprinted areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 600 mm Circular
7
31836
4548
... More
Providing and Fixing of Semi cautionary, mandatory, informatory sign boards as per IRC-67 made of 1.5 mm thick M.S. Sheet duly stove white colour in front and grey colour on back with red reflective border of 65 mm width and required message, letters, figures with reflective tape of engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour Supported and welded on 47 mm x 47 mm of 12 SWG square tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450x 450x 600 mm, 600 mm below ground level as per approved drawing and Clause 1701.2.2Semi - Reflective Traffic signs. 900 X 600 Reactangular
4
22304
5576
... More
Providing and Fixing of Semi cautionary, mandatory, informatory sign boards as per IRC-67 made of 1.5 mm thick M.S. Sheet duly stove white colour in front and grey colour on back with red reflective border of 65 mm width and required message, letters, figures with reflective tape of engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour Supported and welded on 47 mm x 47 mm of 12 SWG square tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450x 450x 600 mm, 600 mm below ground level as per approved drawing and Clause 1701.2.2Semi - Reflective Traffic signs 600 x450 mm Reactangular
4
17180
4295
... More
Providing and Fixing of Semi cautionary, mandatory, informatory sign boards as per IRC-67 made of 1.5 mm thick M.S. Sheet duly stove white colour in front and grey colour on back with red reflective border of 65 mm width and required message, letters, figures with reflective tape of engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour Supported and welded on 47 mm x 47 mm of 12 SWG square tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450x 450x 600 mm, 600 mm below ground level as per approved drawing and Clause 1701.2.2Semi - Reflective Traffic signs 600 mm X 600 mm Sqaure
4
18844
4711
... More
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
2
29519
14759.73
... More
MMGSY / PMGSY Citizen' s information Board- Providing and fixing of typical PMGSY Retro Reflective information board as per as per section1700 of MORD specifications and latest PMGSY Signage Manual / Circular and drawing. Two ACP (Aluminum Composite Panel) sheets of 4 mm thick, of 900 mm x 750mm size fixed at top & bottom duly rivetted with MS angles of 35 x 35 x 5 mm thick M.S angle shall be welded by two vertical M.S angle of 5 mm thick to 75 mm x 75 mm of 12 SWG square tubes / 75mm Dia Pipe posts duly embedded in cement concrete M-20 grade blocks of 600mm x 600mm x 75mm, below ground level. MMGSY / PMGSY logo, letters and numerals on the ACP should be made up of Retro Reflective sheeting of Class-A / Class-B grade as per the latest MORD section 1700 specifications (Refer Circular no. NRRDA-P013(11)/3/2019-Dir (Tech) dated 02.12.2019). Printing PMGSY Logo/MMGSY Logo/Project description on Class A or Class B type retro reflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IRC 67-2012. The inks used for printing shall be eco friendly with VOC emissions complying to UL 2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5 years & 7 years for Class A and Class B sheeting respectively for traffic colors. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paints as per drawing Clause 1701 and Annexure 1700.1 (10.16). The design, painting and lettering shall be done as per the PMGSY Signage Guidelines Fig.3 and Fig.4 and as directed by Engineer-In-charge. . A warranty for 5 / 7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor.
2
56802
28401
... More
Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703.Ordinary Kilometer Stone (Precast)
4
10112
2528.07
... More
Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703.200 m stone (precast)
13
6814
524.16
... More
Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701(0.9 Sqm. Board)
13.5
49548
3670.27
... More
Providing and fixing of Road Stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a s
35
10220
292
... More
Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704
130
77767
598.21
... More
STANDARD METAL DELINEATOR Supply and Installation of Road delienators ( Road way Delienators ) as per MORT&H clause 806.The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed in confirmation with IRC:79 1981or as directed by engineer in charge.The delineator shall be painted with powder coat of minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting shall be pasted on both sides. The delienator shall consist minimum retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification.The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof.
90
121680
1352
... More
Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade /colour of 2.5mm thick including 1.5Refractive index reflectorizing glass beads @250 gm/sqm.Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015 .Initial Dry reflectivity RL shall be 250 mcd/sqm /lux measured in the initial 7days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd /sqm /lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner , Easylux , Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5.The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer - in-charge and in accordance with applicable specifications. (Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015).
150.42
100179
666
... More
Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702
248
49084
197.92
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification Clause 202. Rubble Stone Masonry in Cement Mortar
140.6
26545
188.8
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202. Cement Concrete
9.02
6880
762.81
... More
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202. (Item No 2.13) (B) Above 600 mm to 900 mm dia Hume pipe
60
28026
467.11
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary Soil
700.39
372838
532.33
... More
Earthwork in excavation for structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious material, dressing of sides and bottom and backfilling in trenches with approved material. ( Item No 11.1 (I) Ordinary rock (not requiring blasting)
103.95
58983
567.42
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (P.C.C grade M 10) Nominal mix 1:3:6
140.84
773136
5489.47
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 P.C.C. grade M15 (Nominal mix (1:2:5:5:)
871
5090211
5844.1
... More
Providing laterite stone masonry in cement mortar 1:6 in foundation and plinth including striking joints on the unexposed faces and watering complet
62.1
323296
5206.06
... More
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
1.22
75915
62225.47
... More
Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. FOR NP2 (600mm Dia.)
35
62545
1787
... More
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. FOR NP3 (600mm Dia.)
30
98940
3298
... More
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.. For NP-3 (1000 MM DIA. )
127.5
901329
7069.25
... More
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
80
14501
181.27
... More
Filling the trench as per drawing and technical specification clause 305.3.9 Rubble soling
134.85
274113
2032.73
... More
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 (Granular material)
36
56926
1581.29
... More
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and Technical Specification Clause 1701
3000
2580
0.86
... More
B) Proposed Improvement / Upgradation Tulsuli Kervade Turf Mangaon To Ghavnale Road Tirawade in Taluka :- KUDAL , District :- Sindhudurg
-
-
-
... More
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.(II) By Mechanical Means (In area of thorny jungle) 40%
1.09
39516
36254.12
... More
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.(II) By Mechanical Means (In area of non-thorny jungle) 60%
1.64
48294
29447.91
... More
Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3
6685.01
374293
55.99
... More
Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with a lift upto 1.5 m and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5
742.78
278861
375.43
... More
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacting with vibratory roller to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 Construction of Embankment with Material Obtained from Roadway Cutting
6167.37
445037
72.16
... More
Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 5000 m as per Technical specification 301.5 Construction of Embankment with Material Obtained from Borrow Pits
13149.96
5101263
387.93
... More
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 5000 m as per Technical Specification Clause 303.1.Construction of earthen shoulders with Material Available from Borrow Pit
4693.09
1776193
378.47
... More
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (II) For Grading II Material Granular sub-base with Well Graded Material(Table 400.1)
1724.25
3571525
2071.35
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. .WBM Grading-II (Crushable Screenings)
1067.67
2293525
2148.16
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. WBM Grading III (Stone Screening)
2010.69
4932001
2452.89
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
26571.75
1990489
74.91
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
26571.75
335069
12.61
... More
Providing, laying and rolling of close-graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.9 mm (TypeA) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 50 , Use Type B
27032.55
5820648
215.32
... More
Providing and fixing Cautionary /Warning sign boards in aluminum sheet bonded with white retroreflective sheeting of ClassB (Type IV High intensity micro-prismatic grade sheeting IP )having pressure sensitive /heat activated adhesive retoreflective specified background, border and back side retoreflctive symbols,letters,numerals,arrow as per IRC: 67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no.of M.S.angle iron post of size 65mm X65mm X6mm ,3.45 m long,duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60 cmX 60cmX 75cm including transportation etc;complete.Class B (Type IV High intensity micro-prismatic grade sheeting-HIP )shall have 7years written warranty from the manufacturer and authorised distributor /convertor issued for field performance including the screenprinted areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 600 mm Equilateral triangle
18
69246
3847
... More
Providing and fixing Cautionary /Warning sign boards in aluminum sheet bonded with white retroreflective sheeting of ClassB (Type IV High intensity micro-prismatic grade sheeting IP )having pressure sensitive /heat activated adhesive retoreflective specified background, border and back side retoreflctive symbols,letters,numerals,arrow as per IRC: 67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no.of M.S.angle iron post of size 65mm X65mm X6mm ,3.45 m long,duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60 cmX 60cmX 75cm including transportation etc;complete.Class B (Type IV High intensity micro-prismatic grade sheeting-HIP )shall have 7years written warranty from the manufacturer and authorised distributor /convertor issued for field performance including the screenprinted areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 600 mm Circular
15
68220
4548
... More
Providing and Fixing of Semi cautionary, mandatory, informatory sign boards as per IRC-67 made of 1.5 mm thick M.S. Sheet duly stove white colour in front and grey colour on back with red reflective border of 65 mm width and required message, letters, figures with reflective tape of engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour Supported and welded on 47 mm x 47 mm of 12 SWG square tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450x 450x 600 mm, 600 mm below ground level as per approved drawing and Clause 1701.2.2Semi - Reflective Traffic signs. 900 X 600 Reactangular
8
44608
5576
... More
Providing and Fixing of Semi cautionary, mandatory, informatory sign boards as per IRC-67 made of 1.5 mm thick M.S. Sheet duly stove white colour in front and grey colour on back with red reflective border of 65 mm width and required message, letters, figures with reflective tape of engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour Supported and welded on 47 mm x 47 mm of 12 SWG square tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450x 450x 600 mm, 600 mm below ground level as per approved drawing and Clause 1701.2.2Semi - Reflective Traffic signs 600 x450 mm Reactangular
8
34360
4295
... More
Providing and Fixing of Semi cautionary, mandatory, informatory sign boards as per IRC-67 made of 1.5 mm thick M.S. Sheet duly stove white colour in front and grey colour on back with red reflective border of 65 mm width and required message, letters, figures with reflective tape of engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour Supported and welded on 47 mm x 47 mm of 12 SWG square tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450x 450x 600 mm, 600 mm below ground level as per approved drawing and Clause 1701.2.2Semi - Reflective Traffic signs 600 mm X 600 mm Sqaure
8
37688
4711
... More
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
2
29519
14759.73
... More
MMGSY / PMGSY Citizen' s information Board- Providing and fixing of typical PMGSY Retro Reflective information board as per as per section1700 of MORD specifications and latest PMGSY Signage Manual / Circular and drawing. Two ACP (Aluminum Composite Panel) sheets of 4 mm thick, of 900 mm x 750mm size fixed at top & bottom duly rivetted with MS angles of 35 x 35 x 5 mm thick M.S angle shall be welded by two vertical M.S angle of 5 mm thick to 75 mm x 75 mm of 12 SWG square tubes / 75mm Dia Pipe posts duly embedded in cement concrete M-20 grade blocks of 600mm x 600mm x 75mm, below ground level. MMGSY / PMGSY logo, letters and numerals on the ACP should be made up of Retro Reflective sheeting of Class-A / Class-B grade as per the latest MORD section 1700 specifications (Refer Circular no. NRRDA-P013(11)/3/2019-Dir (Tech) dated 02.12.2019). Printing PMGSY Logo/MMGSY Logo/Project description on Class A or Class B type retro reflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IRC 67-2012. The inks used for printing shall be eco friendly with VOC emissions complying to UL 2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5 years & 7 years for Class A and Class B sheeting respectively for traffic colors. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paints as per drawing Clause 1701 and Annexure 1700.1 (10.16). The design, painting and lettering shall be done as per the PMGSY Signage Guidelines Fig.3 and Fig.4 and as directed by Engineer-In-charge. . A warranty for 5 / 7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor.
2
56802
28401
... More
Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. 5th Kilometre Stone (precast)
1
4305
4305.06
... More
Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703.Ordinary Kilometer Stone (Precast)
7
17696
2528.07
... More
Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703.200 m stone (precast)
28
14676
524.16
... More
Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701(0.9 Sqm. Board)
15.7
57623
3670.27
... More
Providing and fixing of Road Stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a s
453
132276
292
... More
Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704
682
407979
598.21
... More
STANDARD METAL DELINEATOR Supply and Installation of Road delienators ( Road way Delienators ) as per MORT&H clause 806.The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed in confirmation with IRC:79 1981or as directed by engineer in charge.The delineator shall be painted with powder coat of minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting shall be pasted on both sides. The delienator shall consist minimum retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification.The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof.
120
162240
1352
... More
Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade /colour of 2.5mm thick including 1.5Refractive index reflectorizing glass beads @250 gm/sqm.Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015 .Initial Dry reflectivity RL shall be 250 mcd/sqm /lux measured in the initial 7days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd /sqm /lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner , Easylux , Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5.The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer - in-charge and in accordance with applicable specifications. (Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015).
409.2
272527
666
... More
Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702
236
46709
197.92
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification Clause 202. Rubble Stone Masonry in Cement Mortar
414.07
78176
188.8
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202. Cement Concrete
42.24
32221
762.81
... More
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202. (Item No 2.13) (B) Above 600 mm to 900 mm dia Hume pipe
142.5
66563
467.11
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary Soil
2506.21
1334130
532.33
... More
Earthwork in excavation for structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious material, dressing of sides and bottom and backfilling in trenches with approved material. ( Item No 11.1 (I) Ordinary rock (not requiring blasting)
802.39
455292
567.42
... More
Earthwork in excavation for structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious material, dressing of sides and bottom and backfilling in trenches with approved material. ( Item No 11.1 (I) Hard rock (blasting prohibited)
77.44
66178
854.58
... More
Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required.For Medium Dewatering For Raft foundation block
645.07
124498
193
... More
Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75 mtrs depth, placing the dowel in position and effectively grouting the hole with CM 1:1 proportion etc. complete.For Abutment
48
80352
1674
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (P.C.C grade M 10) Nominal mix 1:3:6
204.51
1161248
5678.2
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 P.C.C. grade M15 (Nominal mix (1:2:5:5:)
1297.32
7807103
6017.87
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204,( PCC grade M-20) Nominal mix (1:2:4)
305.13
1978130
6482.91
... More
Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 ( R.C.C grade M 20) For design mix RCC M 20
12.29
86308
7022.63
... More
Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5, R.C.C M 25
55.65
418701
7523.84
... More
Providing laterite stone masonry in cement mortar 1:6 in foundation and plinth including striking joints on the unexposed faces and watering complet
41.4
225200
5439.63
... More
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
9.07
565068
62300.82
... More
Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. FOR NP2 (600mm Dia.)
45
80415
1787
... More
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. FOR NP3 (600mm Dia.)
30
98940
3298
... More
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.. For NP-3 (1000 MM DIA. )
195
1378503
7069.25
... More
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. For NP-3 (1200 MM DIA. )
30
281200
9373.34
... More
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
552
100061
181.27
... More
Filling the trench as per drawing and technical specification clause 305.3.9 Rubble soling
261.86
565175
2158.31
... More
Providing expansion joints with 25 mm thick bituminous pad as per detailed drawings etc.complete.
7.06
7667
1086
... More
Providing & fixing G.I. wire Gabions coated with Zinc+PVC of required size, section including boxes made of mechanically woven hexagonal shaped wire mesh of type, 10x12cm. edges mechanically selvedged made of heavily (Zinc+ PVC) coated G.I. wires as per BS: 443, mesh wire 3.00 mm ? edge wire 3.9 mm ? and filled with 20 to 50 kilogram weight trap stones including conveying with all the leads & lifts and placing at required places in required line, level, slope as per drawing, section as directed etc. complete under tidal conditions.
(a) Gabions of size ? 1.00 x 1.00 x 1.00 M
130
469340
3610.31
... More
Providing & fixing G.I. wire Gabions coated with Zinc+PVC of required size, section including boxes made of mechanically woven hexagonal shaped wire mesh of type, 10x12cm. edges mechanically selvedged made of heavily (Zinc+ PVC) coated G.I. wires as per BS: 443, mesh wire 3.00 mm ? edge wire 3.9 mm ? and filled with 20 to 50 kilogram weight trap stones including conveying with all the leads & lifts and placing at required places in required line, level, slope as per drawing, section as directed etc. complete under tidal conditions.
(c) Gabions of size ? 2.00 x 1.00 x 1.00 M
260
825580
3175.31
... More
Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302 , Stone/Boulder
20.7
35375
1708.96
... More
Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302
13.5
35756
2648.6
... More
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 (Granular material)
173.7
296483
1706.87
... More
Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3
33.54
101824
3035.9
... More
Providing and laying cement concrete wearing course M 30 grade Including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3
20.69
250071
12086.59
... More
Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8
97.5
203352
2085.67
... More
Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete.
75
141568
1887.58
... More
Providing tar paper bearing including laying in proper position etc. complete.
9.9
980
99
... More
Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing and erecting a W "metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810)"
90
442080
4912
... More
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and Technical Specification Clause 1701
8302
7139
0.86
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements