Oil And Natural Gas Corporation Limited Tender

Providing and erecting weather proof, dust and vermin proof, floor mounted front operated indoor type cubical panel board with necessary IP-42 and above protection and CPRI approved factory as per IEC 61439 as per approval from EIC made from 14 SWG thick CRC M.S sheets for internal partition with necessary accessories, supporting angles/flat channels including cutting, bending drilling, welding riveting with internal partitions & cable alley as per requirement & instruction of EICwith errection of below switchgears, busbars, suitable size of interconnecting PVC copper wire/copper aluminum strips, rubber grommets, rib, Bakelite control fuses, earth bus and earth bolts, foundation flange, bolt base plates, sufficient nos of hinged doors, handles with locking arrangement and rubber gasket, heavy duty end terminal connection, danger notice board, earthing strip complete and the panel should be painted with epoxy power coating consisting of following:- Incomer - MCCB,4P, 225 Amp – 01 No Outgoing MCCB, 4P, 100 Amp,25 KA – 02 Nos MCCB, 4P, 80 Amp, 25 KA- 02 Nos MCB, 3P with ELCB or RCCB, 63 Amp- 6 Nos MCB, 3P with ELCB or RCCB, 50 Amp- 3 Nos MCB, 4P with ELCB or RCCB, 40 Amp- 4 Nos MCB, 3P with ELCB or RCCB, 32 Amp- 4 Nos MCB, 2P with ELCB or RCCB, 32 Amp- 2 Nos MCB, 2P with ELCB or RCCB, 20 Amp- 2 Nos Dimensions: Height=210 cms, width= 100 cms and depth= 30 cms (Tolerance +10%)

Cost of supply

Cost of Installation, testing & commissioning

Supply and laying of 4C x 10 sq. mm, multistrand Copper conductor for 1.1 KV, FRLS, XLPE insulated, armoured cable on wall with necessary clamps or in floor below tiles and termination with gland, lugs and shrouds at both ends

Cost of supply

Cost of Installation, testing & commissioning

Supply and laying of 4C x 6 sq. mm, multistrand Copper conductor for 1.1 KV, FRLS, XLPE insulated, armoured cable on wall with necessary clamps or in floor below tiles and termination with gland, lugs and shrouds at both ends

Cost of supply

Cost of Installation, testing & commissioning

Providing and laying 70 mm inner dia approved make ISI marked rigid PVC pipe having 6 kg/cm2 (Class-3) to be erected below tiles on floor as directed for laying of cable

Cost of supply

Cost of Installation, testing & commissioning

Covering of cables laid in pipe at floor with tiles and the tiles has to be laid in the entire Galley for uniformity look of area 10 Mtr X 15 Mtr.

Cost of supply

Cost of Installation, testing & commissioning

Supply,termination of 4 way Junction boxes as approved by EIC

Cost of supply

Cost of Installation, testing & commissioning

Supply, laying, termination of Ground MCT as approved by EIC.

Cost of supply

Cost of Installation, testing & commissioning

Supply, laying, termination of Industrial Power socket with switch as approved by EIC

Cost of supply

Cost of Installation, testing & commissioning

Installation of following new Kitchen Equipment in Galley by removing the old equipment’s including testing and commissioning:- a) Induction Fry, Smooth Top, 15KW:- 01 No. b) 2 Hot Plate(Zone) Induction Cooking Top, 8 KW :- 02 Nos. c) 4 Hot Plate(Zone) Induction Cooking Top, 16 KW :- 03 Nos. d) Induction Fry top, 16 KW :- 01 No. e) Deep Fryer, 20 KW :- 01 No. f) 3 Deck Oven :- 01 No. g) Microwave Over, 35 L :- 03 Nos. h) Planetary Mixer 60 L, 1.5 KW :- 01 No. i) Industrial wet grinder with coconut scrapper:- 01 No. j) Induction Frying pan:- 05 Nos. k) Induction cooking pot :- 10 Nos. l) Industrial juicer :- 01 No. m) Cooking spatula stainless steel :- 02 Nos. n) Cooking spatula for Induction surface:- 02 Nos. o) Industrial Mixer Grinder, 3L :- 01 No. p) Induction Heating, water immersing food Serving Counter With 10 Container:- 01 No. q) Drinking water Heater :- 01 No. r) Chapati puffer :- 02 Nos.

Cost of Installation, testing & commissioning

Miscellaneous Consumable and Accessories.

Cost of supply

Cost of Installation, testing & commissioning