National Environmental Engineering Research Institute Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
National Environmental Engineering Research Institute - NEERI Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date15 Mar 2022
Closing Date24 Mar 2022
Tender Amount₹ 49,60,794
Costs
EMD
₹ 1,05,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_CSIR_109852_1Bid Award Id
ViewTender No
50(17)/2021-22/WTender Authority
National Environmental Engineering Research Institute ViewPurchaser Address
-Website
http://csir.res.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
50
-
-
Dismantling all type of tile work in wall, floors and roofs laid in cement mortar including it's base plaster, P.C.C. & stacking material within 50 metres lead.
-
-
-
For thickness of tiles 10 mm to 25 mm
275
-
-
Dismantling G.I. pipes (external , Internal & concealed) after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
-
-
-
15 mm to 40 mm nominal bore
100
-
-
Above 40 mm nominal bore
50
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
Of area 3 sq. metres and below
43
-
-
Of area beyond 3 sq. metres
10
-
-
Dismantling Rolling shutter including, removing side frame, removing required RCC work and making good wall surface complete,etc. and stacking within 50 metres lead :
1
-
-
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
1500
-
-
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
-
-
-
Asbestos cement/ FRP sheet
75
-
-
Dismantling old rain ,waste water C.I. pipes including excavation if required and refilling , taking out the pipes, manually /by mechanical means stacking of pipes within NEERI premises with all lead as per the direction of Engineer-in-charge:
-
-
-
Up to 150 mm diameter
50
-
-
Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.
7
-
-
Demolishing cement concrete manually/ by mechanical means including refiling and disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
1:3:6 or richer mix
10
-
-
Cleaning of open surface inside NEERI premies by removing the building rubbish / malba such as concrete wall / brick wall with the help of JCB and wire rope if required including loading,cleaning the other material as per the direction of engineer-in-charge. a) Hire charges for hydraulic excavator, (3D) with driver and fuel charges)
1
-
-
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as
approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
75
-
-
Removing dry or oil bound distemper, plastic emulsion, water proofing cement paint and oil paint by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
700
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
30
-
-
Supplying and laying boulder soling (soling stone 125 to 45 mm)and voids filled with murum below floor and plinth including watering compacting and consolidating in layer not more than 150mm thick etc. complete
35
-
-
Brickwork & Plaster
-
-
-
Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level.
-
-
-
Cement mortar 1:4 (1 cement :4 coarse sand)
15
-
-
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :
-
-
-
Cement mortar 1:4 (1 cement : 4 coarse sand)
6
-
-
12mm cement plaster of mix:
-
-
-
1:4 (1 cement: 4 fine sand)
60
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.
-
-
-
1:2:4(1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size)
9
-
-
Centering and shuttering including strutting, propping etc. and removal
of form for :
-
-
-
Foundations, footings, shelf , etc. for mass concrete
40
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more
500
-
-
Providing and fixing 15-18 mm thick gang saw cut mirror polished and prepolished machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing and polishing, edge moulding wherever necessarry as per drawing and instruction of Engineer Incharge etc. complete at all levels.
-
-
-
Granite of any colour and shade
60
-
-
Providing and fixing kadappa stone 20-30mm thick for kitchen platforms, shelf and similar locations of required size of approved shade and colour fixed using cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, curing etc. complete at all levels.
15
-
-
Providing and laying Vitrified tiles in floor with of size 800 mm x 800 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints Payment for grouting of joints to be made separately).
-
-
-
Size of Tile 800x800 mm
275
-
-
Providing and fixing Ist Premium quality Vitrified rustic/matt/glazed finish wall and skirting acid and/or alkali resistant tiles(upto size 800 mmx800 mm and upto 10 mm thick) conforming to ISO : 13006 (thickness to be specified by the manufacturer) of approved make in all colours, shades with high lighter, border if any as approved by Engineer-in-Charge in skirting, and dados over plastered surface by 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) by using polymer modified cement based wall tile adhesive with minimum required thickness including grouting joint with white cement polymer grout of matching pigments (of make Balendura Gold star, Bostik Super fix all tile adhesive or equivalent) as approved by the Engineer in charge etc., complete.
25
-
-
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by PVC rubber moulded block with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed of course sand/stone dust, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge.
60
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.
-
-
-
wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to all/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I
50
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
8
-
-
Providing and fixing glass door handle with lock Pull Handle type With Back to Back installation on Glass. Gaskets to prevent the contact between glass and metal. Out side Key operation with key and thumb turn from inside. Dead bolt movement 32mm at Bottom. Three point fixing with door. Integral locking facility. Seperate product for left & right hand doors. Material:-Stainless Steel Grade 304.etc complete.( Ozone make OGHL-55-R/L-K2N-SSS-25x1400)
2
-
-
Providing & fixing 65mm thick Full ht. partially Glazed partition with 8mm thick cement board (fire resitance paramiter as per BS 476- Part 22 with resistance of 134 min. or Equivalent) to either side of frame of Aluminium sections 50 mm x 50 mm x 1mm at 610 mm c/c grid in both direction.Including partially glazed door shutter out of BWR solid core flush door panel, fixing 6 mm thick glass with etching, S.S. handles 2 nos., Brass Hinges 3 Nos. and three coats of French polish of approved shade to TW beading as per drawing. The item also includes grouting frame in wall/ floor & ceiling etc. complete. (Al. sections shall carry up to slab soffit. Measurement up to ceiling only will be paid.)
120
-
-
Providing & fixing 65mm thick full ht. Dead partition with 8mm thick cement board (fire resitance paramiter as per BS 476- Part 22 with resistance of 134 min. or Equivalent) to either side of frame of 50 mm x 50 mm x 1mm Aluminium sections at less than 610 mm c/c. Including 65mm thk. Including Wicket gate with all necessary fittings & 15-19 mm thick black granite strip, with half round poilshed edge fixed with necessary adhesive on partition edges as per drawing. The item also includes grouting frame in floor etc. complete.As per drawing.
20
-
-
Providing & preparing Laboratory platform 600-800 mm wide out of 16 mm thk. Black granite supported over 12 mm thk. Cement Board including double moulding on the edges, with 25 x 50 mm size Aluminium hollow pipes (TW inserted) for framing etc. complete. 15 mm thk. PVC Panel shutters shall be screwed to Al. framework, via hinges. Intermediates shelves & pull-out working tray operating on telescopic channels shall be out of 15 mm thk. PVC panel. Necessary hardware like S.S. Handles, magnets, locks, etc. shall be considered. All edges shall be finished with 10mm thk.t.w. beadings. All beadings shall have 03 coats of acrylic emulsion paint after relevant coat of wood primer, with finishing etc. complete. (All Hardware-Ebco or equivalent make)
12
-
-
Providing & fixing in position following Project assistant working platform made of 15 mm PVC sheet at top,12 mm PVC sheet side and front, support including 15 mm additional PVC sheet for modesty panel along with125 mm drawer unit made of 15 mm PVC sheet with 3 coat of Acid proof paint & CPU base resting on foot rest & Key board tray (ebco make metalic). All external and internal surface to be finished with 3 coat of Acid proof paint and make including SS brush finish accessories like handles, telescopic sliding channel, hinges for shutter, drawer/shutter locks including cable guard and teak wood beading for all edges with 3 coats of acid proof paint to all teak wood members complete in all respect ect complete.
-
-
-
900 x 600 x 750 (Porject Asis.)
15
-
-
Providing and fixing 410 mm deep Overhead Storage Cabinets out of 15 mm thk. PVC Panel shutters to be screwed to Al. framework, via hinges. Intermediates shelves shall be out of 15 mm thk. PVC panel. Necessary hardware like S.S. Handles, magnets, locks, etc. shall be considered. All edges shall be finished with 10mm thk.t.w. beadings. All beadings shall have 03 coats of acrylic emulsion paint after relevant coat of wood primer, with finishing etc. complete. (All Hardware-Ebco or equivalent make). PVC panels are self extinguishing, thermally stable, Acid absorbant with 2.98% capacity.
12
-
-
Providing and fixing 430 mm deep File Storage Cabinets out of 18mm thick MR grade comm.ply structure with T.W. beading on edges, 6 mm thick MR grade comm. ply on back, 1mm thk. Laminate of approved shade in multi-colours on external surfaces, 0.8 mm thk. Laminate on all internal sides , brush finished stainless steel handles, locks, hinges of approved make for drawers & all outer surface, shutters with three coats of french polish to T.W. beading/ T.W. members, with finishing etc. complete. As per drawing.
27
-
-
Providing & fixing in position following Tables made of 18 mm MR grade Comm. Ply at top, side and front, support, drawer unit(125mm deep), including 18 mm additional MR grade ply & 1mm Laminate for modesty panel, with CPU trolley, cable manager & Key board tray (make metalic). All external surface to be finished with 1mm thk. Laminate of approved shade and 0.8 mm thk. laminate to all internal surfaces including SS brush finish accessories like handles, telescopic sliding channel, hinges for shutter, drawer/shutter locks and 2nd class T.W beading for all edges with three coats of Melamine polish to all T.W members complete in all respect. The rate includes polished surfaces etc complete. As per drawing (Plan area shall be considered for measurement ).
-
-
-
Head scientist Front table -1825x925 side table-1220x430
2.5
-
-
scientist Front table -1520x760 side table-920x430
11
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws .
11
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured)
15
-
-
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality
-
-
-
1.0 mm thick.
25
-
-
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) :
-
-
-
Rectangular or square
15
-
-
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive including SS Hinges 3nos., Alumnium handle1no., aldrop 1no. etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing .
-
-
-
30 mm thick plainPVC door shutters
6
-
-
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge.
12
-
-
Providing and fixing factory made uPVC white colour sliding glazed window
upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes,wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.
-
-
-
Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area
of window above 1.75 sqm).
50
-
-
Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion(where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profileof frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, allcomplete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerance in dimension i.e. in depth & width of profile shall be acceptable.
-
-
-
Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriatedimension. (Area upto 0.75 sqm.)
15
-
-
Providing and fixing aluminium work for windows and ventilators with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling
and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron) shade as approved by the Engineer in charge.
175
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)shade as approved by the Engineer in charge.
175
-
-
Providing and fixing consealed lock (best make of approved quality in pair) for aluminium window including necessary cutting and making good etc. complete.
25
-
-
Providing and fixing tinted glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 5 mm thickness
66
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the rchitectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 5 mm thickness
45
-
-
Providing and fixing stainless steel grade 304 mosquito net/wire gauze of average width of aperture 1.2-1.4mm with wire of 26 gauge mm with powder coated suitable aluminimum section (8X18 mm), 1.2mm th. for doors, windows in aluminium window etc. complete of make as approved by the Engineer in charge.
40
-
-
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
300x16 mm
6
-
-
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
125 mm
15
-
-
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
-
-
-
Twin rubber stopper
6
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
250x10mm
12
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS:3564 embossed on the body, door weight 36 kg to 80kg and door width 701mm to 1000mm) (make- Godrej or as approved) with double speed adjustment with necessary accessories and screws etc. complete.
12
-
-
Providing and fixing 100mm Mortice latch and lock with 6 levers without pairs of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete
12
-
-
Providing and fixing 43mm thick fire resistant factory made single leaf fire door of size 1.2m x 2.13 m of as per list of approved make or equivalent make of 120 minutes fire rating conforming to IS:3614 (part-II) tested and certified as per manufacturer specification, with suitably mounting on single leaf profile door frame fabricated from 1.20mm thick galvanised steel sheet with jamb depth of 139 mm/100 mm and width of 57 mm including high quality PU paint, fixed to masonary/RCC surface with anchor bolts as per manufacturer's specifications and as per the directions of engineer-in-charge. Honeycomb Core shutter panel shall be fabricated from 0.80mm thick galvanised steel sheet having tray and cover Construction to provide a nominal thickness of 43mm including infill material with reinforcement at top and bottom edges. The shutter shall have fire rated fitting/fixture such as stainless steel ball bearing butt hinges of 100 mm width and 3 mm thickness- 4 nos, Godrej 240 mortise lock with lever handle 1 nos, Godrej heavy duty door closure 1 no.
-
-
-
The shutter shall have vision window of size 200mm x 300mm of fire rated wired/clear glass of required thickness as per manufacturer specification. The rate of item includes all material and fitting, etc. complete as directed by Engineer Incharge.
2.52
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of
Engineer-in-charge complete. Upto 5mm depth and 5 mm width
45
-
-
Providing and fixing vertical blinds with 100mm Louver width, quality of approved make fabric made of 100% polyester woven fabric thickness 0.40mm with Acrylic coating resistance to Cracking & Fraying and treated for dust repellency, UV proof , virtually maintenance free having plastic bottom chain thickness of chain-0.50mm and diameter-3mm, Plastic with metal bottom weight - 116.20mmX48.30mm and suitable coating on exterior, including all fixtures and fittings complete in all respect as per design/color/shade including requisite installation brackets etc as required for installation at site with anchoring arrangements complete as directed by engineer incharge.
50
-
-
Providing and fixing complete glass partition with 12mm thick toughened glass Fixed in in teak wood beading to hold 12mm thk. clear toughened glass. All the exposed edges of the glass shall be machine polished. Rate shall include necessary etching to glass, miscellaneous hardware items etc. as directed by Engineer Inchare. (Heavy Duty fixed frames (14 Gauge) – Approved quality make).
13
-
-
Providing and fixing frosted glass film of garware of approved design for windows/partition make as approved by engineer-in-charge .
20
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
700
-
-
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :
-
-
-
Water thinnable cement primer
700
-
-
Finishing with Deluxe Multi surface paint system for interiors using Primer as per manufacturers specifications including scafolding :
-
-
-
Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm
1200
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
Two or more coats on new work
100
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates
and similar works
1500
-
-
Providing and fixing 20 mm thick Bison cement boards with support at 300 mm centre to centre or less with screwa at 400 mm centre s etc. complete (as per manufacturers specifications).
25
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :
-
-
-
Size 450x300x150 mm
3
-
-
Bench/wall Mounted 3 Way swan neck Column With Swiveling Spout, Water Flow Around 40i/min At 3 Bars Pressure, Surface Protection:epoxy Powder Coating Ral 7035 Materials:brass / Handle In Pp Head work Sealing.
3
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Concealed work, including cutting chases and making good the walls etc.
-
-
-
15 mm nominal outer dia Pipes
30
-
-
20 mm nominal outer dia Pipes
75
-
-
25 mm nominal outer dia Pipes
30
-
-
Providing & Fixing 15mm C.P. brass angle cock with C.P copper connecting pipe 375mm long & nuts, washer & C.P. brass flange complete, including cutting & making good the wall wherever required. As per list of approved make or Equivalent
7
-
-
Providing and fixing brass Bottle Trap (with Internal Partition) 32mm Size with 250mm & 190mm Long Wall connection Pipes & Wall Flange. As per list of approved make or equivalent
2
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
2
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
25 to 40 mm nominal bore
2
-
-
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
-
For pipes 100 to 250 mm diameter
2
-
-
Providing following dia. HDPE SWR (P-80) soil/vent / waste pipes with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including seal ring confirming to IS :5282 with necessary fixtures' and fittings such as bends, tee, single junction, double junction, slotted vent offsets, cowl with cap on walls or in the ground including testing of joints etc. complete
-
-
-
100 mm diameter
75
-
-
75 mm diameter
75
-
-
50 mm diameter
25
-
-
Providing and fixing on floor 110x75mm PVC(SWR) Nahani trap conforming to IS of make as approved by the Engineer in charge.
6
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipe valves having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,reducer, including fixing the pipe with clamps . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
For 32 mm nominal outer dia Pipes (NB 25 mm)
4
-
-
For 20mm nominal outer dia Pipes (NB 15mm)
10
-
-
Providing and laying 150mm dia. Eco drain pipe with necessary fixtures and fittings such as bends, tee, single junction, double junction with cap on walls or in the ground including testing of joints etc. complete as directed by Engineer Incharge
40
-
-
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed :
-
-
-
All kinds of soil.
60
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements