National Environmental Engineering Research Institute Tender

Supplying LED industrial luminaire for surface mounting type not more than 20 Watt/2000 lumen tube, 6300 (K), IP 20, CRI should be / = 80, IF ia / = 0.9, with box type batten / fitting (white vitreous enamelled/ powder coated) made from CRCA sheet with one no. LED T8 tube lamp complete with 230 V, 4 feet long, driver (SMPS). A. C. supply with necessary materials and guarantee for five years.

Supplying and fixing of 20 mm sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing 3 x 1.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Supplying and drawing 3 x 2.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Supplying and drawing 3 x 4 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

P/F MCB Single Pole: Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 40 A rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.

P/F Street light luminaires 18/ 20 w LED: Prioviding and fixing Street light fitting in the exeisting pole/ bracket, fitting shall be comprises of die cast aluminium housing, pipe mounting type with a normal system lumen output of 100 Lumens/watt. The luminaire shall have a rated system lifetime of 15000 burning hours. The luminaire shall have high efficiency diffuser, heat resistance toughened glass. IP66 protection, The total power consumption should not exceed 20 Watts, operates on voltage 150-240 V, 50 Hz. etc. complete with all accessories, IP 65 protection for optical compartment with high power LEDs and driver with efficiency 0.85, optics should be such that it gives uniform distribution and having surge protection device. guarantee for two years, LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest

Dismantling of existing wiring, switchboards, three phase main switch board with complete accessories in store room (Swa OFFICE) in front of civil section etc. as required. Dismantled material to be handed over to department as per instruction of department as required.

Installation,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.