National Environmental Engineering Research Institute Tender

Supply, installation, testing and commissioning of SFP Single Mode with 10G. As required.

Supplying and drawing Category 6A UTP Solid cable Conductor 23 AWG (Solid), Conductor Meta Bare Copper Insulation, Material: High Density Polyethylene, Sheath: PVC/LSZH, Cable Diameter: 7,5mm ± 0.4mm, Grey in colour, Comply with Cat 6A specifications, 4-pair unshielded twisted pair (UTP) cable23 AWG solid copper conductor with a frequency of 500 MHz HD-PE insulation, PE central cross FR PVC/LSZH Jacket Packaged in an easy-to-pull box for easier installation, Supports Gigabit Ethernet (10GbaseT) standard. Operates at bandwidth of 500MHz in existing conduit as required.

Supplying and fixing of 20 mm sizes of PVC conduit Flexible Cable Management Sleeve in Grey colour along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 20 mm sizes of medium class PVC conduit/PVC Casing Capping along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 50 mm sizes of medium class PVC conduit/PVC Casing Capping along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Dismantling of all old cabling, IO Box upto 15nos, LIU, Switch, Fibre, Netrack, with its accessory's like MS/PVC pipe, MS/PVC frame etc. from wall including stacking of serviceable material, dismantled material to be handed over to the department and making the surface in good condition with cement as per direction of Engineer-in-charge and Reinstallation of Netrack, Fibre, LIU, Switch as required.

Part-B

Supply and laying of Category 6A UTP Solid cable Conductor 23 AWG (Solid), Conductor Meta Bare Copper Insulation, Material: High Density Polyethylene, Sheath: PVC/LSZH, Cable Diameter: 7,5mm ± 0.4mm, Grey in colour, Comply with Cat 6A specifications, 4-pair unshielded twisted pair (UTP) cable23 AWG solid copper conductor with a frequency of 500 MHz HD-PE insulation, PE central cross FR PVC/LSZH Jacket Packaged in an easy-to-pull box for easier installation, Supports Gigabit Ethernet (10GbaseT) standard. Operates at bandwidth of 500MHz in existing conduit. As required.

Supplying and fixing of 20 mm sizes of medium class PVC conduit/PVC Casing Capping along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 50 mm sizes of medium class PVC conduit/PVC Casing Capping along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, installation testing and commissioning of CAT6A IO, Face Plate, Wall Box with Network Interface Card Combo. As required.

Supply, installation testing and commissioning of 12 U Net rack that Conforms to DIN 41494 or equivalent standard, Welded Construction, Front Door Lockable Toughened Glass Door, Basic Frame of Steel, DIN Standard Slots, Standard Powder Coated Finish, Top and Bottom Cover Welded to Frame, Vented and Field Cable entry exit cut outs, Standard Grey Colour, Static Load capacity of 40 Kgs. As required.

Supply and laying of Armoured Single-mode fibre (SMF), having 6 Core Count, Operating Temperature : upto 70 deg, Storage Temperature upto 70 deg, Jacket Material : Black HDPE outer jacket, UV stable, Outer Diameter upto 6 mm +/- 0.5 mm, Jacket Thickness : upto 1.6 mm +/- 0.2 mm as required.

Supply, installation testing and commissioning of LIU 12-Port / Adapter / pigtails along with required Fibre patch cords, 1.5mm steel sheet for strong housing Slim 1 Unit Mounting Height Ball bearing slide rails with positive stop Sliding design is easy to work for patching the connectors Front-mounted cable saddles for jumper management Can manage both splices and terminations Preassembled shelves in multiple configurations Can include adapter panels for up to 48LC, 48SC terminations as required.

Supply, installation testing and commissioning of 48 Port Patch panel for Cat 6A cable, Identification, PC, transparent colour with paper Panel: SPCC, 1.5mm thickness with black colour, RJ45 Jack, Housing :PBT +Glass fibre UL94V-OContact Brackets : PBT + Glass fibre UL94V-0, black colour, ideally suitable for CAT6A cable.

Supplying and laying of 40 mm size HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (3 Feet below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Supply, installation testing and commissioning of 10G Single Mode SFP. As required

Supply and laying of Category: 6A STP Solid cable Conductor: 23 AWG (Solid) Conductor Meta: Bare Copper Insulation Material: High Density Polyethylene Sheath: PVC/LSZH Cable Diameter: 7,5mm ± 0.4mm, Comply with Cat.6A specifications4-pair shielded twisted pair (STP) cable23 AWG solid copper conductor with a frequency of 500 MHz HD-PE insulation, PE central cross FR PVC/LSZH Jacket Packaged in an easy-to-pull box for easier installation, Supports Gigabit Ethernet (10GbaseT) standard. Operates at bandwidth of 500MHz.

Supply and Fixing of 40 mm dia. G.I. pipe (medium class)

Supplying and erecting Shade for wifi Access Point of size 400 X 400 X 150 mm 18 swg thick permanent silver color. To br hinged at top two clamps with nut bolt as required

Supply, installation testing and commissioning of 24 Port Patch panel for Cat 6A cable, Identification, PC, transparent colour with paper Panel: SPCC, 1.5mm thickness with black colour, RJ45 Jack, Housing :PBT +Glass fibre UL94V-OContact Brackets : PBT + Glass fibre UL94V-0, black colour, ideally suitable for CAT6A cable.

Part-C

Supply, installation, testing and commissioning of Physical/Hardware wireless controller which support 200 access points from day 1, with scalability of 1-1000 access points, concurrent end client device support of 25000, rack mountable, supporting dual band(2.5& 5.0 GHz), with 2 Ethernet ports, and 2 multi gig(10G) SFP/SFP+ ports, GUI management with Access control list, High availability(N+1), Client SSO, Redundant Power Supply, 2 SSD Hard Drive, Data rate 4GB and above, 802.11ac Wave 2 encryption, Flexible DFS to prevent additional 20/40 MHz Channels from going unused, AAA Authentication, IPv6 Support, Mesh network support, Support for QoS for voice over Wireless, MU-MIMO support, 512 WLAN Support, Radio Resource Management such for power channel coverage hole detection and performance optimization, support for load balancing, support for beam forming, operate as a for wireless IPS, Role based Policy Management, Rogue access point diction, Deep packet inspection for layer 4-7 traffic for user, support for wireless intrusion protection system, WPC Certified, Wi-Fi Certified, support for non-Wi-Fi detection for off-channel rouges and containment for both radio while serving the client simultaneously, operating temperature is 40C, operating humidity 95%, storage humidity 95%, On site of warranty 5 years as required.

Supply, installation testing and commissioning of Controller based Indoor Wireless Access Point, mountable on ceiling, Internal antenna, Dual radios, Dual frequency band(2.5GHz, 5GHz), Supporting 802.11ac Wave2 Wi-Fi Standards, 1267 Mbps wireless speed, 80 Metre wireless signal range, Channel width 20 MHz, WPA2 AES, dedicated console port may be available, Receiver Sensitivity -97db, 27dBm transmit power, Radio Resource Management such for power channel, coverage hole detection and performance optimization, Support for Load Balancing between 2-4 GHz and 5 GHz Not Available, Support for Configurable Carrier Threshold, Device Manageable through Web-based Configuration Interface (GUI), Support for Mesh Networking, May Support for QoS for Voice over Wireless, Support for MU-MIMO, Number of MIMO supported & Spatial Streams 2 x 2:2, 16 Number of WLAN (SSID) per AP, 192 clients, May Support for Autonomous access-point option, may USB Ports, 1 Nos. of 10/100/1000 port, may support mGig support, May Support for Bluetooth Low Energy (BLE) support on AP, Support for Beam forming, May Operate as a sensor for wireless IPS, Support for QoS and Video Call Admission Control capabilities, Support for Rogue access point detection, Support for Wireless Intrusion Protection System, WPC Certified, Wi-Fi Certified, Support non-Wi-Fi detection for off-channel rogues and Containment for both radio while serving the client simultaneously, Powering options (Such as AC/DC, 802/3af PoE, 802/3at PoE+), Power POE 11 Watt, Environmental Standard: plenum-rated (UL2043) for Indoor and IP67 for Outdoor, Operating Temperature Range Degree -15C-50C, Operating Humidity 90%RH, On Site OEM Warranty 5 Years as required.

Supply, installation testing and commissioning of 8 Ports Managed POE+ Layer 2 Access Switch having 8 nos. of 1G Copper Ports, Dedicated Console Port, Switching Capacity-Non Blocking 16 GBPS, Throughput 14.88 MPPS, Operating System, Stacking Bandwidth 20 GBPS, Security Feature (Port Isolation, Link Aggregation, VLAN, MAC, Spanning Tree, ACL, LLDP, User Setting etc.), Management Protocol (CLA, SSH, Telnet, GUI, SNMP RMON etc.), QoS (802.1p, DSCP, SP, WRR scheduling, Classification based on source IP, Destination IP and port number etc.), Operating Temperature Range -10~50°C Degree, Operating Humidity 10%~90% (RH), IPv6 Ready from day one and dully certified, PoE Power Budget 130 Watt, On Site Warranty of 3 Years as required.

Supply, installation testing and commissioning of 24 Ports Managed PoE+ Layer 2 Access Switch having, 24 Nos. of 1G Copper Ports, 4 Nos. of 10 G SFP+ Port (Uplink), Multi-Gigabit Support, Dedicated Console Port, Switching Capacity-Non Blocking 128 Gbps, Throughput 96 MPPS, Operating System, Stacking Bandwidth 128 Gbps, Basic Layer-3 Protocol(IPv4/IPv6 Static, RIPv1/v2, OSPFv2/3, 802.1q VLAN, IEEE 802.1d, Voice/IP/MAC/GVRP VLAN etc.), Security Feature(ARP, IP source, DoS, DHCP Snooping, DHCP Attack, 802.1X Certification, AAA, Port security, Post Isolation etc.), Management Protocol(HTTP, HTTPS, SSLv3, LLDP, NTP, SNMP v1/v2c/v3, Ping, etc.), QoS (Queues, Port/802.1P/DSCP priority, STP /RSTP/MSTP etc.), Operating Temperature Range -10C to 50C, Operating Humidity 10-90(RH)(%), IPv6 Ready from day one and dully certified, PoE Power Budget 400 Watt, On Site Warranty of 1 Year as required.

Supply, installation testing and commissioning of 48 Ports Managed PoE+ Layer 2 Access Switch having, 48 Nos. of 1G Copper Ports, 4 Nos. of 10 G SFP+ Port (Uplink), Multi-Gigabit Support, Dedicated Console Port, Switching Capacity-Non Blocking 176 Gbps, Throughput 130 MPPS, Operating System, Stacking Bandwidth 176 Gbps, Basic Layer-3 Protocol (IPv4/IPv6 Static, RIPv1/v2, OSPFv2/3, 802.1q VLAN, IEEE 802.1d, Voice/IP/MAC/GVRP VLAN etc.), Security Feature(ARP, IP source, DoS, DHCP Snooping, DHCP Attack, 802.1X Certification, AAA, Port security, Post Isolation etc.), Management Protocol (HTTP, HTTPS, SSLv3, LLDP, NTP, SNMP v1/v2c/v3, Ping, etc.), QoS (Queues, Port/802.1P/DSCP priority, STP /RSTP/MSTP etc.), Operating Temperature Range -10C to 50C, Operating Humidity 10-90(RH)(%), IPv6 Ready from day one and dully certified, PoE Power Budget 740 Watt, On Site Warranty of 5 Year as required.

Supplying and fixing of 20 mm sizes of PVC conduit Flexible Cable Management Sleeve in Grey colour along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 20 mm sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.