National Environmental Engineering Research Institute Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
National Environmental Engineering Research Institute - NEERI Tender
Solid Waste Management
Eprocure
Opening Date6 Sep 2021
Closing Date14 Sep 2021
Tender Amount₹ 54,43,706
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_CSIR_83089_2Bid Award Id
ViewTender No
50(06)/2021-22/WTender Authority
National Environmental Engineering Research Institute ViewPurchaser Address
-Website
http://csir.res.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
All kinds of soil.
195
-
-
Extra rates for quantities of works, executed:
-
-
-
Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required.
-
-
-
Note for item no.3:- The extra percentage rate @ 20% is applicable in respect of each item but limited to quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered for payment, shall be the depth measured from the sub soil water level up to the centre of gravity of the qty executed in difficult conditions. The depth shall be reckoned correct to 0.10 m, 0.05 m or more shall be taken as0.10 m and less than 0.05 m ignored
-
-
-
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
135
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:2:4(1Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
1
-
-
1:3:6(1Cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
14
-
-
Extra for laying concrete in or under water and/or liquid mud including cum per cost of pumping or bailing out water and removing slush etc. complete.
9
-
-
Note for item No. 4.15 :- The quantity will be calculated by multiplying the depth measured from the sub-soil water level up to centre of gravity of concrete under sub-soil water level with quantity of concrete in cum executed under sub-soil water. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored.
-
-
-
Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineerin-charge. Note : 1) Excess/less cement used than specified in this item is payable / recoverable separately.
-
-
-
All works upto plinth level :
-
-
-
M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)
75
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).
-
-
-
All works upto plinth level
70
-
-
All works above plinth level upto floor V level
38
-
-
Extra for providing richer mixes at all floor levels.
-
-
-
Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @340 kg/cum)
108
-
-
Add for using extra cement in the items of design mix over and above the specified cement content therein.
22
-
-
Extra for laying reinforced cement concrete in or under water and/ or liquid mud, including cost of pumping or bailing out water and removing slush etc., complete.
25
-
-
Note For Item No. 5.31:- The quantity will be calculated by multiplyingthe depth measured from the subsoil water level up to the centre of gravity of the R.C.C. under subsoil water with the quantity of R.C.C. in cubic metre executed under subsoil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub - soil water conditions.
-
-
-
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth and above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
9500
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights:
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.
32
-
-
Walls (any thickness) including attached pilasters,butteresses, plinth and string courses etc.
640
-
-
Suspended floors, roofs, landings, balconies and access platform
30
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
22
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts.
61
-
-
Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In stringers, treads, landings etc. of stair cases, including use of plates, chequered plate wherever required, all complete.
185
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
50
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
Hot finished welded type tubes
290
-
-
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :
-
-
-
Cement mortar 1:4 (1 cement : 4 coarse sand)
7.5
-
-
Providing and fixing in position factory made precast RCC M-40 fixing with hold fast embedded in 1:3:6 concrete block for doors and windows frames having excellent smooth finish as per IS: 6523 with reinforcement of 3 Nos, 6 mm dia main bars tied with 3 mm M.S stirrups placed @ 200 mm C/C and 6 numbers high strength polymer blocks of required size for fixing hinges including providing 6 no specially designed M.S. galvanised sleeves for accomodating 6 mm dia fully threaded bolts forfixing hold fast on vertical members, providing suitable arrangement for recieving sliding door bolts and tower bolt etc all complete, as per the direction of Engineer in charge. The frame shall be measured in running metre correct to two places of decimal.
-
-
-
Door frame 125 mmx 60 mm
5.2
-
-
Door frame 100 mmx 60 mm
4.95
-
-
Providing and fixing 30 mm thick flush door shutters (30mm thick BWP flush door conforming to IS: 2202 , core of block board construction with frame of 2nd class teak wood 50mmX25mm) 15x32mm teak lipping along Periphery and 1.0mm thick decorative high pressure laminated sheet of plain /wood grain in gloss / matt / suede finish with high density protective surface layer in approved design & pattern, machine/factory/manual pressed, should be pasted with heat and moisture resistent PVA glue of D3 grade, fixed on both faces of the board by machine/ manual pressing thus making the 34mm thick shutters ,brass butt hinges 125X70X4 mm (heavy type minimum three nos to each leaf of shutters) with necessary brass screws in double/ single leaf shutters etc. complete as per the instruction of Engineer-incharge. Approved make for flush door Elegent/Kitply and for mica Green ply, Kitply etc. equivalent as approved by the Engineer in charge.
3.7
-
-
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) :
-
-
-
Rectangular or square
2.1
-
-
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :
-
-
-
Size : 300 x 16 mm
2
-
-
Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :
-
-
-
250x20x6 mm
2
-
-
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
-
-
-
200x10 mm
2
-
-
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
-
-
-
125 mm
4
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15)
6.5
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).
-
-
-
Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15)
7
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 4.0 mm thickness
2
-
-
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
0.5
-
-
Providing and fixing consealed lock (best make of approved quality in pair) for aluminium window including necessary cutting and making good etc. complete.
2
-
-
Providing and fixing stainless steel mosquito net/wire gauze of average width of aperture 1.2-1.4mm with wire of 26-28 gauge mm with powder coated suitable aluminimum section(8X18 mm), with gasket, screws for doors, windows in aluminium window etc. complete of make as approved by the Engineer in charge.(Aluminium section to be paid seperately)
1
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer in-charge complete.
-
-
-
Upto 5mm depth and 5 mm width
14
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External Work
-
-
-
15 mm dia nominal bore metre
45
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.
-
-
-
Internal work – Exposed on wall.
-
-
-
15 mm dia. nominal bore
10
-
-
Providing and fixing G.I. concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall.
-
-
-
15mm dia nominal bore
3
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
15 mm nominal bore
1
-
-
Providing and fixing G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (New work).
-
-
-
15 mm nominal bore
4
-
-
Providing and fixing gun metal gate valve with C.I. wheel confirming to revalent ISI mark, of approved by the Engineer-In-charge.
-
-
-
15 mm nominal bore
2
-
-
Providing and fixing brass bib cock of approved quality :
-
-
-
15 mm nominal bore
2
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete.
-
-
-
15 to 40 mm nominal bore
2
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.
-
-
-
110 mm diameter
6
-
-
Providing and fixing on wall face unplasticised - PVC/SWR moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
-
-
-
Single pushfit Coupler :
-
-
-
110 mm
2
-
-
Bend 87.5°
-
-
-
110 mm bend
2
-
-
Shoe (Plain)
-
-
-
110 mm Shoe
2
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50 x50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.
-
-
-
110 mm diameter
6
-
-
Providing and fixing on wall face/floor with clips unplasticised - PVC (SWR type 'A',working pressure 4 Kgf per sq cm ) pipes conforming to IS: 13592 including all fittings like Tee, Bend,cleaning type,Y & clips/clamps etc.conforming to IS: 14735,scafolding & jointing with seal ring/ solvent cement and testing of joints complete, conforming to IS: 5382 leaving gap for thermal expansion of make as approved by the Engineer in charge.
-
-
-
Single socketed pipes
-
-
-
110 mm diameter
13
-
-
75 mm diameter
5
-
-
40mm diameter
5
-
-
Providing and fixing on floor 110x75mm PVC(SWR) Nanhi trap conforming to IS of make as approved by the Engineer in charge.
1
-
-
Providing and fixing stainless steel jali (grating) with or without hole for waste pipe for floor/ nahani trap.
-
-
-
110mm dia weight not less than 100 gms
1
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside), the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg per standard design.
-
-
-
100x100 mm Size P type
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With F.P.S. bricks with class designation 75
1
-
-
Extra for depth for manholes :
-
-
-
Size 90x80 cm
-
-
-
With common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5
0.45
-
-
Grading roof for water proofing treatment by adding polypropyelene glass fibers and integral waterproofing admixture added @ 100 ml per 50 kg of cement (Polypropyelene Glass Fibers and integral waterproofing admixture will be paid separately.)
-
-
-
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm and down )
1.25
-
-
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
-
-
-
In 75x75mm deep chase
15
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
10
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink asper IS:13983 with C.I. brackets, waste coupling and waste pipe and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
Kitchen sink without drain board
-
-
-
610x460 mm bowl depth 200 mm
1
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
1
-
-
52 mm thick cement concrete flooring with concrete hardener topping,under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
9
-
-
Extra for making chequers of approved pattern on cement concrete floors,
steps, landing, pavements etc.
9
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.
5
-
-
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
10
-
-
12 mm cement plaster of mix :
-
-
-
1:6 (1 cement: 6 coarse sand)
270
-
-
12 mm cement plaster finished with a floating coat of neat cement
-
-
-
1:4 (1 cement : 4 fine sand)
310
-
-
Finishing walls with water proofing cement paint of required shade :
-
-
-
New work (Two or more coats applied @ 3.84 kg/10 sqm)
270
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
60
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
Two or more coats on new work
5
-
-
Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade :
-
-
-
New work (two or more coats) over and including water thinnable priming coat with cement primer
60
-
-
Supplying & laying boulder & murum below floor and plinth including watering compacting & consolidating in layer not more than 200mm thick etc. complete.as per the instruction of Engineer in charge.
20
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
11
-
-
ELECTRICAL WORK ITEM
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B.
8
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
2
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
1
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
25
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
-
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
60
-
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
10
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm
170
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
20
-
-
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
6
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm)
24
-
-
Supplying armoured cable 16 sq mm: Armoured cable of XLPE insulated (cross linked polythelene) PVC sheathed, armoured with galvanised round / strip steel, 1100 V. grade conforming to I.S. 1554 (part-1) & IS : 7098 (part-1), 16 Sq. mm 4 core stranded Aluminium conductor.
190
-
-
Supplying LED industrial luminaire for surface mounting type not more than 20 watts tube with box type batten / fitting (white vitreous enamelled/ powder coated) made from CRCA sheet with one no. LED T8 tube lamp complete with 230 V, driver (SMPS). A.c supply with necessary materials and guarantee for two years.
4
-
-
Suppling exhaust fan A.C 230 V. of 300mm sweep. Air delivery 19 CMM, 55 Watts, 900 RPM, Dynamically balanced blades for vibration free rotation, alluminium die-cast body to ensure long life, heavy duty and all accessories etc. (with two years guarantee)
2
-
-
Installation of exhaust fan in the existing opening, including making good the damage and by providing proper covering to remaining required portion, connection, testing, commissioning etc. as required upto 450 mm sweep.
2
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
-
-
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
1
-
-
Supply, installation, Testing & commissioning of wall/floor mounted feeder piller made of 1.6 mm thick IP 42 sheet steel enclosure, separate compartment, inbuilt locking arrangement, dust & vermin proof capable to take all following accessories including their connections having hinged doors with numbering, lettering, earthing with 2 runs of galvanised iron strips, Two coates of oil painted, as required.
1
-
-
1 No. 64 Amp, Isc 15kA 3 phase and neutral aluminium bus bar with colour code, having current density of 130 A/Sq cm and suitable support.
-
-
-
1 No.- 64 Amp 3 Pole Breaking capacity 25 KA MCCB with speader link and suitable enclose.
-
-
-
1 No. - Electronic type 40 Amps, 415 Volts, As per IS 13779 Energy Metres, three phase, Digital Display, class 1 accurcy.
-
-
-
10 Nos. - 16 Amp 3 Pole Breaking capacity C series, 10 KA MCB for out going and DOL starter with suitable over current relay for 2 HP motor, Push butten for ON/ OFF with in built indicator .
-
-
-
5 Nos. - 10 Amp 3 Pole Breaking capacity C series, 10 KA MCB for out going.
-
-
-
3 Nos. - 6-16 Amp 1 Pole Breaking capacity C series, 10 KA MCB for out going.
-
-
-
1 No. - Amper Metre 0 - 50 A with accuracy class 1.5 flush type and confirming to IS 1248. duty S1.
-
-
-
6 No. - Single phase preventor
-
-
-
1 No. - VoltMetre 0 - 500 V. with accuracy class 1.5 flush type and confirming to IS 1248.
-
-
-
2 Nos. - Selector switch for VoltMetre & ampermetre 3 phase 500V and 10 Amp 3 pin switch socket
-
-
-
2 Nos. - MCB 6 amp single pole, 10KA outgoing
-
-
-
1 Nos - spare block
-
-
-
Supplying energy saving, 5 star rated, 43 watts, white coloured ceiling fan with double ball bearings condenser A. C. 230 V. of 1200 mm sweep complete with canopy and rubber bushing having air delivery 215 cmm with speed 330 rpm all accessories etc. including fan clamp of M.S. bar with fook of 16 mm thick with glossy powder coated paint for superior finish as required. (With guarantee of two years)
1
-
-
Installation testing and commissioning of prewired fluorescent fitting / down lighters of all types complete with all accessories and tube directly in recess/ on Celling / Wall or down rod including connections with 1.5 sq. mm PVC insu. Copper conductor single core cable & dismantling of existing fittings as required.
4
-
-
ELECTRO MECHNICAL WORK ITEMS
-
-
-
Providing and installing Bourdon type pressure gauge with dial size 75 mm having pressure range 4.5 kg/sq.cm over pipes with making necessary arrangement like making holes, threading, ss/brass connection inclusive of all fittings etc complete of make H.Guru/Waaree, Instruments /Forbes /Marshall/Radix Micro System /Radic Sensor or equivalent as approved by the instructions of the Engineer in charge.
10
-
-
Providing and laying 12 mm thick HDPE plates of size 1m x2m with making perforations of 12mm dia. 50 mm center to center at a distance of 50 mm from the both edges as per the direction of the Engineer in charge etc. complete.
7
-
-
Providing and laying Cylindrical Shape Poly Vinyl Chloride/Poly Propeline media in MBBR of Dia 20 to 25 mm, Height 10 mm to 16 mm & Sp Gravity 0.94 to 0.98 having surface area 400 Sqm/Cum of make Cooldeck/ Marvellous or equvalent as approved by the instruction of the project leader and Engineer in charge etc. complete.
10
-
-
Providing fitting and laying Poly Vinyl Chloride/Poly Propeline Honey comb media in SAFF having surface area 150-180 Sqm/Cum, Material :- PVC/PP Dimension :- Longitudinal pitch (mm) -65, Spiral angle (deg.) - 27-30, Standard sheet size-l1200 x 600 mm, Maximum fill sheet size 1800x600mm of make Cooldeck/ Marvellous or equvalent as per the instruction of the project leader and Engineer in charge etc. complete.
20
-
-
Providing and fixing on wall face/floor MS C-class pipes conforming to IS: 1239 including all fittings like Tee, Bend & clips/clamps, incert plates puddle pipe for waste water supply, including all fixing the pipe with clamps. This includes jointing of pipes & fittings with welding, flanges and the cost of cutting, chases and making good the same with testing of joints and required scafolding with priming and epoxy painting of pipes etc. complete, of make Tata/Jindal or equivalent as approved by the Engineer in charge.
-
-
-
25 mm NB
15
-
-
40 mm NB
35
-
-
50 mm NB
32
-
-
65 mm NB
8
-
-
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes, having thermal stability for hot & cold water supply, including all UPVC plain & brass threaded fittings, including fixing the pipe with flanges, clamps, incert plates etc . This includes jointing of pipes & fittings with one step UPVC solvent cement/ flanges and testing of joints etc. complete as per direction of Engineer in Charge. Internal work - Exposed on wall(Approved make Supreme/Astral /Ashirwad or equivqlent as approved by the Engineer in charge)
-
-
-
15 mm NB
8
-
-
25 mm NB
37
-
-
50 mm NB
10
-
-
Providing and fixing Polyvinyl Chloride (PVC) pipes, having thermal stability for hot & cold water supply, including all PVC plain & brass threaded fittings, including fixing the pipe with clamps, incert plates etc. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (Approved make Supreme/Astral/ Ashirwad or equivqlent as approved by the Engineer in charge)
-
-
-
75 OD, 65 mm NB - PN 6
66
-
-
90 OD,80 mm NB - PN6
3
-
-
110OD,100 mm NB - PN6
3
-
-
Providing, fixing and laying ISI Mark HDPE pipes PE-80 conforming to IS: 4984 including all HDPE fittings, capable to withstand temperature up to 80°C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees ,bends, reducers, end caps, couplers ,incert plates, flanges, connectors etc. including testing of joints complete as per direction of the engineer in charge. (This includes jointing of pipes & fittings with one step HDPE solvent cement/ Heat process joint and threading where ever required with testing of joints complete as per direction of Engineer-in-Charge.)
-
-
-
100 mm NB
25
-
-
Providing and fixing flange Ball valve of approved quality with all required fitting & accessoriess as approved by the Engineer in charge as per the listed specification • Design :- 2 Piece • Body :- PVC• Seat Seal :-EPDM• Ball :- PVC • Handel :- PVC• CAP :- ABS• Port :- Regular• Operation :- Manual • End connection :- Flanged • End connection rating :- ASME B 16.5 #150 • Op. Pressure & Temp :- 4 Bar & 40 Deg • Make :- Supreme/Astral/Aqua or Equivalent
-
-
-
For UPVC pipe of NB 15 mm
1
-
-
For PVC pipe of OD 75, NB 65 mm
3
-
-
Providing and fixing Ball valve for MS pipe with all required fitting & accessoriess as approved as approved by the Engineer in charge as per the listed specification • Design :- 2 Piece • Body :- Cast Iron • Stem :- CF8 (SS304) • Ball :- CF8 (SS304) • Port :- Regular • Operation :- Manual • End connection :- Flanged • End connection rating :- ASME B 16.5 #150 • Op. Pressure & Temp :- 4 Bar & 40 Deg • Make :- Crane/Intervalve/Aqua/ Unison /Astral / Kartar Equivalent
-
-
-
15 mm NB
14
-
-
25 mm NB
1
-
-
40 mm NB
2
-
-
50 mm NB
3
-
-
Supplying and installation Butterfly valve confirming to IS having cast iron body lining black Nitrile/Neoprene, cast iron nylon coated disk of GM IS318, SS shaft IS1570, with nut bolts Gaskets etc. Complete with all required fitting & accessoriess as per the listed specification. • Design :- Wafer • Body :- Cast Iron • Disc :- CF8 (SS304)• Seal & O ring :- EPDM• Port :- Regular • Operation :- Manual • End connection :- Flanged • End connection rating :- ASME B 16.5 #150• Op. Pressure & Temp :- 4 Bar & 40 Deg • Make :- Crane/Intervalve/Aqua/ Unison or Equivalent
-
-
-
40 mm NB
6
-
-
50 mm NB
9
-
-
65 mm NB
3
-
-
80 mm NB
1
-
-
90 mm NB
1
-
-
Supplying and installation Non return Check valve confirming to IS 13095,PN 10 , ISI mark, having cast iron body lining black Nitrile/Neoprene, cast iron nylon coated disk of GM IS318, SS shaft IS1570, with nut bolts Gaskets ete. Complete with all required fitting & accessoriessas per listed specification and as approved by the Engineer in charge. • Design :- Wafer • Body :- Cast Iron• Disc :- CF8 (SS304)• Seal & O ring :- EPDM• Port :- Regular • Operation :- Manual • End connection :- Flanged• End connection rating :- ASME B 16.5 #150• Op. Pressure & Temp :- 4 Bar & 40 Deg • Make :- Crane/Intervalve /Aqua/ Unison or Equivalent. for pipe of diameter....
-
-
-
25mm NB
1
-
-
40 mm NB
4
-
-
50 mm NB
2
-
-
Providing and fixing Dissolved Oxygen meter of Range :- 0 - 30 ppm made of PTFE sensor with pipe mounted Accessories, suitable to calibration and with specification mentioned below :-• Measurement Principle :-Oxygen dependent luminescence quenching (phase angle)• Accuracy at 25 °C :-0.4 ppm +/-5% ; 8ppm +/-1% ; 20ppm +/-5% • Response Time t98% :- 30 s at 25°C• Pressure :- up to – 4 Bar • Material :- Weted PVC • Display :- 128 x 64 Dot Matrix LCD display with white back-lit (4-DIGIT)• Housing Material:- Polycarbonate ; Colour : RAL 9007 equivalent• Ingress Protection :- IP 56• Electromagnetic Compliance :- EMC/EMI Approved • Make :- Hatch; Emerson; Forbes Marshall or equivalent as per the instruction of the project leader and Engineer in charge etc. complete.
2
-
-
Providing and fixing Multi grade filter made of Fiber Reinforced Plastic of Dimension: 600 mm dia X 1550 mm ht ; with Media & multiport valve and with specification mentioned below :-
• Operating Temperature up to - 50˚C Operating Pressure 150 psi (10.5kg /cm²) • Diameter -24”(600 mm) Height - 62”(1550 mm) • Material Inner Shell: - Polyethylene (PE) seamless one-piece tank liner • Material Outer Shell: - Continuous strands of fiber-glass with high strength epoxy resin • Opening: - 3” min • Threaded Multi port Valve: - Suitable to Top opening with PVC material to perform rinse; backwash & Service operation • Media :- Layers of Pebbles / Crush Gravels / Filtering Sand / Anthracite (Carbon @ 40%) • Make :- Astral/Intervalve/Kartar or equivalent as per the instruction of the project leader and Engineer in charge etc. complete.
1
-
-
Supplying, Installation, testing and commissioning of level operated submersible pump with Motor of capacity : 5m3/hr @ 15 mtr. Head Type : Centrifugal, three phase, submersible pumps, including pipe connection with suitable coupling, gasket etc. armoured and submersible cable connection to be done in separate GI/PVC box. as required. for Feeding MOC : CI All Motor : Suitable to Pump Capacity Pump make :SPX/KSB/KBL/ Wilo/ Equivalent Motor:- CGL/BB/ABB or Equivalent
2
-
-
Supplying, Installation, testing and commissioning of Blower With Motor with Capacity : 50m3/hr @ 4500mmWC Head Type: Twin lobe Blowers, three phase, with pipe and electrical connection for MBBR etc. as required. MOC : CI, Motor : Suitable to Blower Capacity. Blower:- KPT/Everest /Kay/Equiv Motor:- CGL/ BB/ABB or Equivalent
2
-
-
Supplying, Installation, testing and commissioning of Recirculation Pumps with Capacity:- 5m3/hr @ 15 mtr. Head Type:- Horizontal Centrifugal pumps, 415 Volt, 50Hz with making connection to pipe with all required fittings, GI sheet pump cover for rain water protection. As required. MOC : CI, Motor : Suitable to Pump Capacity. Pump Make : SPX/KSB/KBL/Wilo/ Equivalent Motor Make : CGL/BB/ABB
3
-
-
Supplying, Installation, testing and commissioning of Filter pumps with Capacity:- 5m3/hr @ 3 Bar. Head Type : Horizontal three phase sentrifugal pumps, 415 volt 50 Hz, with electricla and pipe connection with GI sheet pump cover for rain water protection. As required. MOC : CI, Motor : Suitable to Pump Capacity. Pump Make : SPX/KSB/KBL/Wilo or Equivalent Motor Make : CGL/BB/ABB or Equivalent
2
-
-
Supplying, Installation, testing and commissioning of VFD with Power : 5.5 KW Rating, Input power supply for VFDs upto 315kW shall be 415V AC Damper / isolation arrangement as required shall be provided to prevent reverse rotation in idle condition. Mainten minimum distance between the drive and the motor or should be within the recommended distance for a particular model by VF Manufacturer. Output chokes in LV drive to be avoided. Sine wave filters to be mandatorily provided in LV VFD’s. it's enclosure shall have IP-52 for self ventilated enclosure. It must be provided with “Power Off Ride Through feature” to maintain drive operation during voltage dips. Only reputed make of relays with PTR for similar application shall be used for process interlock tripping. Analog 4-20 mA signals shall be provided through screened control cable. Make : Danfoss / Schneider / Siemens /ABB / Equivalent
2
-
-
Supplying, Installation, testing and commissioning of CHLORINE DOSING SYSTEM with Dosing Pump : Electronic Diaghpram; 0-4 LPH, PP, Qty - 01 Nos Dosing Tank:-100 Lts HDPE. Dosing Pump, 230 Volt, 50 Hz.Make : Edose/ Prominent/ Equivalent Dosing Tank Make : Perfect or Equivalent. Item includes making the connection with all required fittings all complete as per the instruction of the Engineer in charge. .
1
-
-
Supplying, Installation, testing and commissioning of Level Operated submersible pump for Filtratation with Capacity: - 1m3/hr @ 15 mtr. Head Type: - Centrifugal, Submersible pumps, 415 volt 50 Hz, including pipe connection with suitable coupling, gasket etc. armoured and submersible cable connection to be done in separate GI/PVC box. MOC :- CI All Motor :- Suitable to Pump Capacity Pump make : SPX/KSB/KBL/ Wilo / Equivalent. Motor Make : CGL/BB/ ABB or Equivalent.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements