National Environmental Engineering Research Institute Tender

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

(c) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in solid colour of approved shades made out of 3mm thick aluminium composite panel material consisting of 3mm thick mineral core sandwiched between two Aluminium sheets (each 0.25mm thick coil ) with CNC LASER CUTTING of lettering as approved and Baking ACP sheet 3mm thick of approved colour and manufacturer such as TimexBoand/AluDecor or Equivalent as approved by engineer-in charge . The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF/Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The aluminium composite panel shall be fixed on aluminium box frame using rectangular tube of size 50x25x1.5mm. The graphics work on the ACP sheet and the required LED lights is also included in this item. (Necessary support steel work will be paid separately) (Size of board-1.2x1.8M)