National Environmental Engineering Research Institute Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
National Environmental Engineering Research Institute - NEERI Tender
Pipes and Pipe Related Activities
Eprocure
Opening Date17 Dec 2020
Closing Date28 Dec 2020
Tender Amount₹ 38,57,227
Costs
EMD
₹ 84,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_CSIR_57788_1Bid Award Id
ViewTender No
50(36)/2017-18/WTender Authority
National Environmental Engineering Research Institute ViewPurchaser Address
-Website
http://csir.res.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
NIT and Tender Document for uploading
BOQ Items
Demolishing cement concrete manually/ by mechanical means including refiling and disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
1:3:6 or richer mix
3
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
In cement mortar
1
-
-
Carting away excess available soil(earth) from site. Cost of carriage including loading, unloading & stacking of first 50 meters.
35
-
-
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
28
-
-
Dismantling old rain ,waste water C.I. pipes including excavation if required and refilling , taking out the pipes, manually /by mechanical means stacking of pipes within NEERI premises with all lead as per the direction of Engineer-in-charge:
-
-
-
Up to 150 mm diameter
30
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling
and plugging holes etc.:
-
-
-
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
50
-
-
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
Chlorpyriphos / Lindane emulsifiable concentrate of 20%
60
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :
-
-
-
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
105
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
All kinds of soil
120
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
All kinds of soil
30
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
85
-
-
Supplying and laying boulder soling (soling stone 125 to 45 mm)and voids filled with murum below floor and plinth including watering compacting and consolidating in layer not more than 150mm thick etc. complete
85
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.
-
-
-
1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)
10
-
-
1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size).
20
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concretework, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).
-
-
-
All works upto plinth level
38
-
-
All works above plinth level upto floor V level
42
-
-
Add for using extra cement in the items of design mix over and above the specified cement content therein.
10
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns etc. for mass concrete.
45
-
-
Suspended floors, roofs, landings, balconies and access platform
145
-
-
Lintels, beams, plinth beams, girders, bressummers and cantilevers.
202
-
-
Columns, pillars, piers, abutments, posts and struts.
140
-
-
Reinforcement for R..C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.:
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
3800
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500 D or more.
4200
-
-
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength up to plinth level.
-
-
-
Cement mortar 1:4 (1 cement : 4 coarse sand)
12
-
-
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :
-
-
-
Cement mortar 1:6 (1 cement : 6 Coarse sand)
35
-
-
Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level.
-
-
-
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
40
-
-
12 mm cement plaster of mix :
-
-
-
1:4 (1 cement: 4 coarse sand)
375
-
-
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
353
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
Size of Tile 600x600 mm
95
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
3
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
95
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
25 mm thick
20
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
-
-
-
Water thinnable cement primer
278
-
-
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
276
-
-
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
-
-
-
Two coats
278
-
-
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :
-
-
-
Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm.
375
-
-
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture.
-
-
-
M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail.
-
-
-
Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm(5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.
-
-
-
30 mm thick pre laminated PVC door shutters
2
-
-
Providing and fixing 43mm thick fire resistant factory made single leaf fire door of size 1.2m x 2.13 m of AHURA MAZDA or equivalent make of 120 minutes fire rating conforming to IS:3614 (part-II) tested and certified as per manufacturer specification, with suitably mounting on single leaf profile door frame fabricated from 1.20mm thick galvanised steel sheet with jamb depth of 139 mm/100 mm and width of 57 mm including high quality PU paint, fixed to masonary/RCC surface with anchor bolts as per manufacturer's specifications and as per the directions of engineer-in-charge.
-
-
-
Honeycomb Core shutter panel shall be fabricated from 0.80mm thick galvanised steel sheet having tray and cover Construction to provide a nominal thickness of 43mm including infill material with reinforcement at top and bottom edges.
-
-
-
The shutter shall have fire rated fitting/fixture such as stainless steel ball bearing butt hinges of 100 mm width and 3 mm thickness- 4 nos, Godrej 240 mortise lock with lever handle 1 nos, Godrej heavy duty door closure 1 no. The shutter shall have vision window of size 200mm x 300mm of fire rated wired/clear glass of required thickness as per manufacturer specification. The rate of item includes all material and fitting, etc. complete as directed by Engineer Incharge.
2.6
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
3
-
-
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality
-
-
-
1.0 mm thick.
6
-
-
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) :
-
-
-
Rectangular or square
3
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS:3564 embossed on the body, door weight 36 kg to 80kg and door width 701mm to 1000mm) (make- Godrej or as approved) with double speed adjustment with necessary accessories and screws etc. complete.
3
-
-
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :
-
-
-
125x64x2.50 mm
8
-
-
100x60x2.50 mm
51
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
250x10mm
3
-
-
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete
-
-
-
300x16 mm
4
-
-
250x16 mm
2
-
-
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
125 mm
6
-
-
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
-
-
-
Twin rubber stopper
4
-
-
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
1
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite of any colour and shade
-
-
-
Area of slab upto 0.50 sqm
5
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
175
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making shall be paid for separately) provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
100
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 4.0 mm thickness
25
-
-
Providing and fixing in position factory made precast RCC M 40 Fixing with hold fast embedded in 1:3:6 concrete block doors and windows frames having smooth finish as per IS: 6523 with reinforcement of 3 Nos, 6 mm dia main bars tied with 3 mm M.S stirrups placed @ 200 mm C/C and 6 numbers high strength polymer blocks of required size for fixing hinges including providing 6 no specially designed M.S. galvanised sleeves for accomodating 6 mm dia fully threaded bolts for fixing hold fast on vertical members, providing suitable arrangement for recieving sliding door bolts and tower bolt etc. all complete, as per the direction of Engineer in charge. The frame shall be measured in running meter correct to two places of decimal.
-
-
-
Door frame 100 mmx 60 mm
6
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
-
-
-
Second class teak wood
0.1
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge.
-
-
-
Pre-laminated particle board with decorative lamination on both sides
35
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
Hot finished welded type tubes (for windows griil)
325
-
-
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600
-
-
-
Upto 10 mm depth and 10 mm width
155
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.
-
-
-
110 mm diameter
25
-
-
Providing and fixing on wall face unplasticised - PVC/SWR moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
-
-
-
Single pushfit Coupler :
-
-
-
75 mm
10
-
-
110 mm
10
-
-
Bend 87.5°
-
-
-
75 mm bend
10
-
-
110 mm bend
10
-
-
Shoe (Plain)
-
-
-
75 mm Shoe
10
-
-
110 mm Shoe
10
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
-
-
-
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
-
-
-
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge.
-
-
-
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and
-
-
-
approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
-
-
-
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge.
-
-
-
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
90
-
-
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
-
-
-
In 75x75 mm deep chase
6
-
-
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02.
-
-
-
The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical locations in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal conditions and finish floor treatments. .
-
-
-
The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions.
-
-
-
The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane all as per the manufactures design and as approved by Engineer -in-Charge. (Material shall conform to ASTM 6063)
-
-
-
Floor Joint of 100 mm gap
5
-
-
Providing and fixing towel rail 600mm long fixed with necessary screws/ plugs etc. complete as per the instruction of Engineer-In-charge.
2
-
-
Providing and fixing vitreous china wash basin with brackets including 15mm C.P brass pillar cock super delux with aerator , 32mm bottle trap with fully casted body 190mmX125mm long connecting pipes with wall flange, 32mm C.P. brass waste of standard pattern,Thalf thread), 450mm long braided hoses with nut & rubber washer,Angular stop cock with wall flange including cutting and making good the walls wherever required etc Complete as per the instruction of Engineer incharge . 510mmX415mm X195mm
2
-
-
Providing and fixing C.P brass Quarter turn Bib cock with wall flange of approved make as per the instruction of Engineer-In-charge. 15 mm nominal bore
1
-
-
Providing and fixing vitreous china wall mounted type water closet including soft closing seat cover with all fittings &wall mounted frame with installation kit, Flushing Cysterncistern with installation of complete system with fittings,2-way bib cock with wall flange, Angular stop cock with wall flange ,40mm flush bend, 450mm long braided hoses with nut & rubber washer,overflow arrangement, health faucet etc. complete cutting and making good the walls and floors wherever required as per approved make of Jaquar or approved equivalent make. Size340mmX505mmX365mm
1
-
-
Providing and fixing on floor PVC(SWR) Nanhi trap having dimension 110 x 63 mm conforming to IS 13592 and IS 14735 of approved make etc. complete as per the direction of Engineer-in-charge.
2
-
-
Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :
-
-
-
75 mm dia
3
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With Sewer bricks conforming to IS : 4885
3
-
-
Extra for depth for manholes :
-
-
-
Size 90x80 cm
-
-
-
With Sewer bricks conforming to IS : 4885
1.5
-
-
Providing and fixing on wall face/floor with clips unplasticised - PVC (SWR type 'A',working pressure 4 Kgf per sq cm ) pipes conforming to IS: 13592 including all fittings like Tee, Bend,cleaning type,Y etc.conforming to IS: 14735,scafolding & jointing with seal ring/ solvent cement and testing of joints complete, conforming to IS: 5382 leaving gap for thermal expansion of make Supreme/Kissan classic/Prince as approved by the Engineer in charge.
-
-
-
Single socketed pipes
-
-
-
110 mm diameter
35
-
-
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
-
For pipes 100 to 250 mm diameter
7
-
-
Providing and fixing on wall face/floor with clips unplasticised - PVC (SWR type 'A',working pressure 4 Kg per sqcm ) pipes accessories conforming to IS: 14735 including jointing with seal ring conforming to IS: 5382 leaving gap for thermal expansion of make Kissan classic/ Prince as approved by the Engineer in charge.
-
-
-
Cowl : 75mm
2
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank having tripple layer body (White Layer: Maintains water temperature, Black Layer: Protects from UV radiation and Blue Layer: For better visibility inside the tank), UV stabilised, rust proof, algae formation protection with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank etc. complete as per the direction of engineer-in-charge.
1000
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
Concealed work, including cutting chases and making good the walls etc.
-
-
-
15 mm nominal outer dia Pipes
25
-
-
25 mm nominal outer dia Pipes
45
-
-
Providing and fixing stainless steel jali (grating) with or without hole for waste pipe for floor/ nahani trap.
-
-
-
110mm dia weight not less than 100 gms
2
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
15 mm nominal bore
2
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality as per the instruction of Engineer-In-charge. 15 mm nominal bore
4
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside), the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg per standard design.
-
-
-
100x100 mm Size P type
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
30
-
-
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
405
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
35
-
-
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
10
-
-
Providing and fixing 450x600X 5mm Designer type beveled edge mirror of superior glass (of approved quality) complete with required bracket ( Heavy 200mmX200mm) at top with screws etc.Complete
2
-
-
Providing and fixing on wall face/floor with clips unplasticised - PVC (SWR type 'A',working pressure 4 Kgf per sq cm ) pipes conforming to IS: 13592 including all fittings like Tee, Bend,cleaning type,Y etc.conforming to IS: 14735,scafolding & jointing with seal ring/ solvent cement and testing of joints complete, conforming to IS: 5382 leaving gap for thermal expansion of make Supreme/Kissan classic/Prince as approved by the Engineer in charge.
-
-
-
Single socketed pipes 75 mm diameter
5
-
-
Single socketed pipes 40 mm diameter
3
-
-
Providing and fixing consealed lock (best make of approved quality in pair) for aluminium window including necessary cutting and making good etc. complete.
3
-
-
Providing and fixing stainless steel grade 304 mosquito net/wire gauze of average width of aperture 1.2-1.4mm with wire of 26 gauge mm with powder coated suitable aluminimum section (8X18 mm) having thickness 1.2mm. The assambly is to be fixed in doors/windows section etc. complete as per the direction of Engineer in charge.
25
-
-
Providing and fixing neco clamp (best make of approved quality) for pipes in a position as per required size including all neccesary fitting etc. complete.
80
-
-
Providing and fixing bright finished aluminium coated casement window fastener with necessary screws etc. complete.
17
-
-
Transplantation of trees of any size and height manualy/mechaically from site to the other location in NEERI premises with necessary excavtion, tree removal and transportation with proper mean including all tools and plant etc. as per the direction of Engineer-in-charge:
2
-
-
B) Electrical Works: Point wiring in steel conduit with modular type switch As per IS 732:1989 : Wiring for light Point/fan Point/exhaust fan point/cell bell point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable (1.1 KV grade with I.S. 694 mark) in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc., as required. Group : B. Wire make : Havells/Polyca//Finolex. Switch make : Legrand arteor 5734 00. Box : legrand arteor 6890 07. Cover plate : legrand arteor 5757 10 / MDS / MK / Salzer.
26
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Switch make: Legrand arteor 5734 00. Socket arteor 5734 70, Box arteor 6890 08, Cover plate: legrand arteor 5757 20 MDS / Siemens/ Salzer.
12
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Switch make: Legrand arteor 5734 10. Socket make: arteor 5734 10, Box arteor 6890 08, Cover plate arteor 5757 20 MDS / Salzer.
10
-
-
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Make : Legrand arteor 5743 63 / MK / Siemens.
8
-
-
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB,“C” curve including connections, painting etc. as required. Make: Legrand / MDS / Siemens / Havells.
4
-
-
Supplying LED industrial luminaire for surface mounting type not more than 18/20 watts tube with box type batten / fitting (white vitreous enamelled/ powder coated) made from CRCA sheet with one no. LED T8 tube lamp complete with 230 V, driver (SMPS). A. C. supply with necessary materials and guarantee for five years. Make: Crompton Retro LTT8-20 / Philips / Surya/Asian/Osram
19
-
-
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
19
-
-
Supplying power saving (Five star rated) 50 watts ceiling fan with double ball bearings condenser A. C. 230 V. of 1200 mm sweep complete with canopy and rubber bushing having air delivery 200 cmm with speed 310 rpm all accessories etc. including fan clamp of M.S. bar with fook of 16 mm thick with glossy powder coated paint for superior finish as required. Make: Usha Power Saver LX White 1200 / Alsthome / Havells.
8
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
8
-
-
Fixing the louvers /Shutters complete with frame for a exhaust fan of all sizes
3
-
-
Supplying exhaust fan A. C. 230 V. of 300 mm sweep. Air Delivery 19 CMM, 55 Watts, 900 RPM, Dynamically balanced blades for vibration free rotation, alluminium die-cast body to ensures long life & all accessories etc as required. Make : Usha Turbo heavy duty./ Allsthom / Havells. (With two years guarantee)
3
-
-
Supplying of outdoor louvers / shutters : Providing louvers / shutters of size 300 mm made up of GI sheet of size 0.8 mm thick, and required frame, necessary arrangement for lifting of louvers.
3
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required upto 450 mm sweep.
3
-
-
Wiring for light/power plug with 2×4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Wire make: Havells /Polyca/ Finolex/ KEI.
120
-
-
Wiring for circuit/submain wiring along with earth wire with the 2×2.5 sq.mm+ 1×2.5 sq.mm earth wire sizes of FRLS PVC insulated copper conductor,single core cablein surface/recessed steel conduit as required. Wire make : Havells/Polyca//Finolex/ KEI.
100
-
-
Numbering of ceiling fan/wall fan/ exhaust fan/ fluorescent fittings as required.
30
-
-
Supplying and fixing 4 way (4+12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB /RCCB / Isolator). Make Legrand/L&T/Siemens
1
-
-
Supplying and fixing 40A rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make Legrand/L&T/Siemens
1
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make Legrand/L&T/Siemens
10
-
-
Supplying and fixing 1 or 2 modules (75 mmX75 mm), GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
4
-
-
Supplying and fixing modular Telephone socket outlet RJ 11(1 module) on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make : Legrand arteor 5734 26/MDS /Salzer
2
-
-
Supplying and fixing Computer socket RJ 45 (cat 6) one module outlet modular socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make: Legrand arteor 5734 28/ MDS/ Salzer
2
-
-
Supplying and fixing of 20 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
60
-
-
Supplying and drawing 1 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
50
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable (1 run of cable) in the existing surface/ recessed Steel/ PVC conduit as required.
50
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the 4 X 6 sq. mm + 2 X 6 sq. mm earth wiresq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
10
-
-
C) Fire Alarm System : Supplying, installation, testing & commissioning 4 Zone sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, and rechargeable battery 7 Ah, (12X2) / 24 volt interconnections as required. (Make - Bosch/ Simplex / Notifier / E-Vision/ Honet well/ Agni/ Ravel) or equivalent
1
-
-
Supplying, fixing, testing & Commissioning of SMOKE DETECTOR with builtin LED and mounting base complete with all connections etc. ad required Make: Bosch/ Simplex / Notifier / E-Vision/ Honet well/ Agni/ Ravel) or equivalent
8
-
-
Supplying & laying of 2x1.5 sq.mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath,fixing of cable on wall or ceiling complete as per site condition by removing and refitting of false ceiling as required. Make :Havell's /Gloster / Tropodour/ CCI / Finolex /HMT /KEI / Leoni / Polycab or equivalent
90
-
-
Supplying, fixing, testing & Commissioning of manual call boxes of MS construction in surface /recess with stanless steel chain and hammer assembly complete with glass and push butten etc. as required. Make: ASES (Agni Suraksha) Bosch/ Simplex or equivalent
4
-
-
Supplying, fixing, testing & Commissioning response indicator on surface /recess MS box having two LEDs metallic cover complete with all connections etc. as required. Make: E-Vision/ Honet well or equivalent
3
-
-
Supplying, fixing, testing & Commissioning of fire alarm sounder with facility to make announcement, mounted in M.S. box (16SWG) with hinged cover plate & suitable for operation with amplifier i/c matching transformer etc. as required. Make: E-Vision/ Honet well/ or equivalent
3
-
-
Issuing of 'Form A' for Physiotherapy unit & Dispensery building, Inspection, testing, Coordinating with govt. authority (NMC) and obtaining approval/certificate and submit the the final fire NOC from local fire department for one year. Govt. fees required for NOC will be reimbursed by department.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements