Nagpur Metropolitan Region Development Authority Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Nagpur Metropolitan Region Development Authority - NMRDA Tender
Civil And Construction
Healthcare and Medicine
Eprocure
Opening Date6 Apr 2023
Closing Date21 Apr 2023
Tender Amount₹ 55,94,44,076
Costs
EMD
₹ 29,99,150Document Cost
₹ 50,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_NMRDA_890527_1Bid Award Id
ViewTender No
e-Tender Notice No.24/2022-23Tender Authority
Nagpur Metropolitan Region Development Authority ViewPurchaser Address
-Website
http://http://www.nmrda.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 3.0 To 4.5 m.) By Mechanical Means
4517.25
-
-
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. As directed by Engineer in charge.
9565
-
-
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. As directed by Engineer in charge.
1456.5
-
-
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper. As directed by Engineer in charge.
460
-
-
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.
5457.7
-
-
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Bd.A.11 Page No. 263
1310.85
-
-
Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. As directed by Engineer in charge.
140.6
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
612.45
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
58.7
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
4692.3
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
347.15
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
-
-
-
GROUND FLOOR
464.1
-
-
FIRST FLOOR
240.3
-
-
SECOND FLOOR
277.5
-
-
THIRD FLOOR
266.55
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
-
-
-
GROUND FLOOR
1143.1
-
-
FIRST FLOOR
534.8
-
-
SECOND FLOOR
536.45
-
-
THIRD FLOOR
396
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
-
-
-
GROUND FLOOR
1498.6
-
-
FIRST FLOOR
608.5
-
-
SECOND FLOOR
699.9
-
-
THIRD FLOOR
396
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
-
-
-
GROUND FLOOR
366.25
-
-
Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
-
-
-
GROUND FLOOR
2.4
-
-
FIRST FLOOR
2.4
-
-
SECOND FLOOR
2.4
-
-
THIRD FLOOR
2.4
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for R.C.C. canopy as per detailed designs and drawings including steel centering, formwork, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing etc. complete (excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
-
-
-
GROUND FLOOR
41.25
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
-
-
-
GROUND FLOOR
546.4
-
-
FIRST FLOOR
47.4
-
-
SECOND FLOOR
77.55
-
-
THIRD FLOOR
67.5
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
-
-
-
GROUND FLOOR
757.7
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
-
-
-
GROUND FLOOR
56.35
-
-
FIRST FLOOR
30.95
-
-
SECOND FLOOR
30.95
-
-
THIRD FLOOR
30.95
-
-
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306
-
-
-
GROUND FLOOR
874.35
-
-
FIRST FLOOR
156.45
-
-
SECOND FLOOR
171.8
-
-
THIRD FLOOR
144.05
-
-
Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. As director by engineer in charge and BDG- 2 and 5
49.15
-
-
Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. As director by engineer incharge and BDG- 2 and 5
-
-
-
GROUND FLOOR
1297.6
-
-
FIRST FLOOR
911.65
-
-
SECOND FLOOR
1230.6
-
-
THIRD FLOOR
1063.1
-
-
Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. Bd. G. 7 Page 316
-
-
-
GROUND FLOOR
1496.8
-
-
FIRST FLOOR
1513.3
-
-
SECOND FLOOR
781.75
-
-
THIRD FLOOR
567.05
-
-
Providing expansion joints in reinforced cement concrete framed structure (interior columns) with plain premoulded filler with confirming to IS 1838,1961, 25 mm thick with 75 mm wide and 1 mm thick stainless steel plate finishing etc. complete as directed. BDK 1A
-
-
-
GROUND FLOOR
75.6
-
-
FIRST FLOOR
44.1
-
-
SECOND FLOOR
44.1
-
-
THIRD FLOOR
44.1
-
-
Providing expansion joints in R.C.C. framed structure (exterior column) with plain premoulded filler 25 mm thick with 75 mm wide and 1 mm thick stainless steel plate and finishing etc. complete. BDK 1B
-
-
-
GROUND FLOOR
12.6
-
-
FIRST FLOOR
12.6
-
-
SECOND FLOOR
12.6
-
-
THIRD FLOOR
12.6
-
-
Providing expansion joints in R.C.C. framed structure (at floor level) with plain premoulded filler 25 mm thick with 75 mm wide and 1 mm thick stainless steel plat a nd finishing etc. complete. BDK 1C
-
-
-
GROUND FLOOR
233.25
-
-
FIRST FLOOR
116.65
-
-
SECOND FLOOR
116.65
-
-
THIRD FLOOR
116.65
-
-
Providing expansion joints in R.C.C. framed structure (at Terrace level) with premoulded filler 25 mm thick with 40 mm wide and 1 mm thick stainless steel plate as required, bitumen poured filler and finishing etc. complete as directed. BDK 1D
-
-
-
THIRD FLOOR
116.65
-
-
Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Bd.U.1 Page No. 537
-
-
-
GROUND FLOOR
230.5
-
-
FIRST FLOOR
184.95
-
-
SECOND FLOOR
198.2
-
-
THIRD FLOOR
154.1
-
-
Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm. As directed by
Engineer in charge.
-
-
-
GROUND FLOOR
133.65
-
-
FIRST FLOOR
108.9
-
-
SECOND FLOOR
277.2
-
-
THIRD FLOOR
198
-
-
Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. As directed by Engineer in charge.
-
-
-
GROUND FLOOR
0.85
-
-
FIRST FLOOR
1.15
-
-
SECOND FLOOR
1
-
-
THIRD FLOOR
1.3
-
-
Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. As directed by Engineer in charge
-
-
-
GROUND FLOOR
2005.6
-
-
FIRST FLOOR
151.1
-
-
SECOND FLOOR
282.25
-
-
THIRD FLOOR
3423.35
-
-
Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) Bd.J.2 Page No.355
-
-
-
GROUND FLOOR
4090
-
-
Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) Bd.J.2 Page No. 355
-
-
-
GROUND FLOOR
1170
-
-
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kg/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kg/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kg/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. As directed by Engineer in charge
-
-
-
GROUND FLOOR
146.1
-
-
FIRST FLOOR
42.6
-
-
SECOND FLOOR
79.8
-
-
THIRD FLOOR
46.6
-
-
Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Bd.L.1 Page No. 367
-
-
-
GROUND FLOOR
11531.4
-
-
FIRST FLOOR
5334.45
-
-
SECOND FLOOR
5732.2
-
-
THIRD FLOOR
4541.65
-
-
Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. As directed by Engineer in Charge.
-
-
-
GROUND FLOOR
3240
-
-
FIRST FLOOR
3240
-
-
SECOND FLOOR
3240
-
-
THIRD FLOOR
2850
-
-
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
Bd. L.2 Page No. 368
-
-
-
GROUND FLOOR
15817.35
-
-
FIRST FLOOR
10176.8
-
-
SECOND FLOOR
10586.15
-
-
THIRD FLOOR
8403.05
-
-
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. Bd.L.8 Page No. 370
-
-
-
GROUND FLOOR
4355.55
-
-
FIRST FLOOR
2418.95
-
-
SECOND FLOOR
2418.95
-
-
THIRD FLOOR
3463.05
-
-
Providing and applying external Stonecrete Plaster 8 to 10 mm thick in one coat of approved colour and shade, over base coat of 8 to 12 mm thick rough cement plaster in C.M. 1:4, in ratio 1 : 1 : 2.5 [ 1 part Birla White Cement, 1 part Dolomite / Calcite / Marble powder and 2.5 part quartz sand /Marble chips (Zero No.)] using water proofing compound. (Impermo – Snowcem make or equivalent) @ 2% by weight of white cement and adding synthetic inorganic colour pigments as per desired shade, to brick or concrete surfaces in all positions, making grooves, chiseling to give Ashlar Stone Finish, Washing and cleaning the surface, applying water repellent (Perma make or equivalent)including scaffolding, curing etc. complete.
-
-
-
GROUND FLOOR
1306.7
-
-
FIRST FLOOR
725.7
-
-
SECOND FLOOR
725.7
-
-
THIRD FLOOR
1038.95
-
-
Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. As directed by Engineer in charge.
-
-
-
GROUND FLOOR
580.5
-
-
Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etc. complete.
As directed by Engineer in charge
-
-
-
GROUND FLOOR
380
-
-
FIRST FLOOR
380
-
-
SECOND FLOOR
380
-
-
THIRD FLOOR
350
-
-
Providing patti/ band 75mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. As directed by Engineer in charge
-
-
-
GROUND FLOOR
380
-
-
FIRST FLOOR
380
-
-
SECOND FLOOR
380
-
-
THIRD FLOOR
350
-
-
Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.
As directed by Engineer in charge
-
-
-
GROUND FLOOR
200
-
-
FIRST FLOOR
200
-
-
SECOND FLOOR
200
-
-
THIRD FLOOR
200
-
-
Providing patti/ band 150mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. As directed by Engineer in charge
-
-
-
GROUND FLOOR
100
-
-
FIRST FLOOR
100
-
-
SECOND FLOOR
100
-
-
THIRD FLOOR
100
-
-
Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box
As directed by Engineer in charge.
-
-
-
GROUND FLOOR
137.25
-
-
FIRST FLOOR
111.15
-
-
SECOND FLOOR
56.7
-
-
THIRD FLOOR
71.1
-
-
Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating with box
As directed by Engineer in charge.
-
-
-
GROUND FLOOR
21.6
-
-
FIRST FLOOR
37.8
-
-
SECOND FLOOR
59.4
-
-
THIRD FLOOR
81
-
-
Supplying and fixing in position Aluminium four track sliding windows with outer frame made from section of over all size 122 mm x 45 mm, bottom section with drain section track weighing 1.83 kg per metre and top and side section of size 122x 31.75 mm weighing 1.15 kg per running metre with shutter sections made of 18 mm x 40 mm size having average weight of 0.6 kg per running metre (or as required size) with change in proportionate weight, with 6 mm float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete.
b) Powder Coated
As directed by Engineer in charge.
-
-
-
GROUND FLOOR
3.6
-
-
FIRST FLOOR
25.2
-
-
SECOND FLOOR
21.6
-
-
THIRD FLOOR
21.6
-
-
Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete.
b) Powder Coated
As directed by Engineer in charge.
-
-
-
GROUND FLOOR
3.6
-
-
FIRST FLOOR
25.2
-
-
SECOND FLOOR
21.6
-
-
THIRD FLOOR
21.6
-
-
Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. As directed by Engineer in charge.
-
-
-
GROUND FLOOR
68.05
-
-
FIRST FLOOR
10.8
-
-
SECOND FLOOR
17.3
-
-
THIRD FLOOR
13
-
-
Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Bd.M.3 Page No. 380
-
-
-
GROUND FLOOR
413.05
-
-
FIRST FLOOR
55.7
-
-
SECOND FLOOR
71.85
-
-
THIRD FLOOR
29.7
-
-
Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. As directed by Engineer in Charge
-
-
-
GROUND FLOOR
29.35
-
-
FIRST FLOOR
12.5
-
-
SECOND FLOOR
7.85
-
-
THIRD FLOOR
3.6
-
-
Providing and laying cement concrete flooring 50 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Natural Sand Bd.M.7 Page No. 383
-
-
-
GROUND FLOOR
1502.7
-
-
THIRD FLOOR
3250
-
-
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Bd.M.22 Page No. 390
-
-
-
GROUND FLOOR
22.05
-
-
FIRST FLOOR
22.05
-
-
SECOND FLOOR
22.05
-
-
THIRD FLOOR
22.05
-
-
Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.
Bd. M-12 page No. 385
-
-
-
GROUND FLOOR
144.85
-
-
FIRST FLOOR
151.1
-
-
SECOND FLOOR
282.25
-
-
THIRD FLOOR
173.35
-
-
Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.
Bd.M.13 Page No. 386
-
-
-
GROUND FLOOR
10
-
-
FIRST FLOOR
10
-
-
SECOND FLOOR
10
-
-
Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete.
For Flooring
As directed by Engineer in charge
-
-
-
GROUND FLOOR
413.05
-
-
FIRST FLOOR
55.7
-
-
SECOND FLOOR
71.85
-
-
THIRD FLOOR
29.7
-
-
Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete.
For Skirting
As directed by Engineer in charge
-
-
-
GROUND FLOOR
457.2
-
-
FIRST FLOOR
52.7
-
-
SECOND FLOOR
90.1
-
-
THIRD FLOOR
58.2
-
-
Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Bd.M. 3 B/Page No. 380
-
-
-
GROUND FLOOR
1670.75
-
-
FIRST FLOOR
874.75
-
-
SECOND FLOOR
835.35
-
-
THIRD FLOOR
813.8
-
-
Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. As directed by Engineer-In- Charge
-
-
-
GROUND FLOOR
476.15
-
-
FIRST FLOOR
236.6
-
-
SECOND FLOOR
242.4
-
-
THIRD FLOOR
230.9
-
-
Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.
Bd. M.22 B/Page No. 390
-
-
-
GROUND FLOOR
420
-
-
FIRST FLOOR
200.7
-
-
SECOND FLOOR
200.7
-
-
THIRD FLOOR
200.7
-
-
Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.
Bd.M.12 Page No.385
-
-
-
GROUND FLOOR
2993.7
-
-
FIRST FLOOR
2606.6
-
-
SECOND FLOOR
2500.6
-
-
THIRD FLOOR
2574.15
-
-
Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.
Bd.M.12 Page No.385
-
-
-
GROUND FLOOR
1284.45
-
-
FIRST FLOOR
1582.75
-
-
SECOND FLOOR
2722.3
-
-
THIRD FLOOR
2226.5
-
-
Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS ..1237 - 1980 having compressive strength more than 500 kg/sq.cm reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm ,skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300 in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring. As directed by Engineer-In- Char
-
-
-
GROUND FLOOR
3788
-
-
Providing and Fixing of Mineral Fibre Suspended Ceiling System with Bioguard (Bevelled Tegular) EDGE TILES WITH 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 90%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0/Class 1 (BS 476 Part 6 and 7), in module size of 600x600 x 16mm with Anti Microbial coating on the face of the tile, suitable for Green Building application, with Recycled content of 34%. The tile shall be laid on precoated G.I. channel on XL2 Clip having a web height of 32 mm 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner and 1200 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.7 Kgs/M2 and pull out strength of 100Kgs. . The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved at GRIHA and BS 476 etc. complete. As directed by Engineer in charge.
-
-
-
GROUND FLOOR
328
-
-
FIRST FLOOR
100
-
-
SECOND FLOOR
3991.05
-
-
THIRD FLOOR
100
-
-
Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). As directed by Engineer in charge
-
-
-
GROUND FLOOR
27348.75
-
-
FIRST FLOOR
15511.25
-
-
SECOND FLOOR
16318.35
-
-
THIRD FLOOR
12944.7
-
-
Providing and applying antipeel paint of approved make & approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (Heat Reflective Paint).
As directed by Engineer in charge
-
-
-
GROUND FLOOR
4355.55
-
-
FIRST FLOOR
2418.95
-
-
SECOND FLOOR
2418.95
-
-
THIRD FLOOR
3463.05
-
-
Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. As directed by Engineer in charge.
-
-
-
GROUND FLOOR
1181
-
-
Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Bd.O.7 Page No.406
-
-
-
GROUND FLOOR
1181
-
-
Solid Core Flush door Double leaf
Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved 1.5mm thick Laminate on both face, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing etc. complete (Excluding door frame) (Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter. As directed by Engineer-in-charge
-
-
-
GROUND FLOOR
164.9
-
-
FIRST FLOOR
84.5
-
-
SECOND FLOOR
50.2
-
-
THIRD FLOOR
128.9
-
-
Solid Core Flush door Single leaf
Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved 1.5mm thick Laminate on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing etc complete. (without door frame)
As directed by Engineer-in-charge
-
-
-
GROUND FLOOR
167.8
-
-
FIRST FLOOR
99.6
-
-
SECOND FLOOR
124.35
-
-
THIRD FLOOR
105.6
-
-
Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6 mm size steel screws including fixture fasting. Complete as per direction of engineer in charge. As directed by Engineer in charge.
-
-
-
GROUND FLOOR
42.55
-
-
FIRST FLOOR
34.65
-
-
SECOND FLOOR
88.2
-
-
THIRD FLOOR
63
-
-
Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). BD-T-57 Page No. 511
-
-
-
GROUND FLOOR
8.4
-
-
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) BD-T-55 Page No.
510
-
-
-
GROUND FLOOR
85.9
-
-
Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) As directed by Engineer Incharge
-
-
-
GROUND FLOOR
94.05
-
-
FIRST FLOOR
120
-
-
SECOND FLOOR
112.8
-
-
THIRD FLOOR
112.8
-
-
Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.
Spec. No. As directed byEngineer in Charge.
-
-
-
GROUND FLOOR
2.05
-
-
THIRD FLOOR
5.85
-
-
Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. Bd.C.8 Page No.278
-
-
-
THIRD FLOOR
13.85
-
-
Providing and fixing in position structural glazing consisting of main frame of powder coated jindal or equivalent make alluminium curain wall section 48 x 64 mm &sub frame of 25 x 25 x 2 mm powder coated alluminium SHS by using structural silicon of Dow Corring 995 weather silicon coirining 785, Spacer tape 6 mm x 6 mm excluding glass inclusive of labour etc. (b) With Glass
As directed by Engineer-In- Charge
-
-
-
GROUND FLOOR
423.4
-
-
FIRST FLOOR
423.4
-
-
SECOND FLOOR
1124.2
-
-
THIRD FLOOR
1124.2
-
-
Providing and fixing in position multiwalled primalite (heat stoper) Poly-carbonate sheet of approved coloured and shade of polygal/ Lexan make or equivalent make, sheet shall be as per manufacturer's specifications such as it shall be solar grade co-extruded to protect itself against yellowing and surface wearing confirming to ASTM D-1003 specifications, cutting, bending and fixing in required piecesin radial direction without overlaping along length with EPDM rubber gasket, silicon sealent, self tapping screws, labour, equipment,scaffolding and all lead and lifts complete.
As directed by Engineer in charge
-
-
-
THIRD FLOOR
577.15
-
-
Providing and fixing 12 mm thick toughaned clear or frosted glass door of single or double leaf with 40 mm thick plywood outer frame finished with 4mm thick veneer on both sides of required size and thickness as per detailed drawing including all necessary heavy duty fixures and fastening like hydraulic floor spring, handle , lock and finishing the plywood work with three coat of melamine polish (Including door frame madeup from plywood with veneer finished) etc. completre. As Directed by Engineer In Charge
-
-
-
GROUND FLOOR
28.8
-
-
Water Supply and Sanitary Fitting
-
-
-
Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint). Bd. V. 19 Page No.559
-
-
-
THIRD FLOOR
25
-
-
Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres. As directed by engineer-in- charge.
-
-
-
THIRD FLOOR
40000
-
-
Providing, laying and fixing P.V.C. pipe of 25mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. As directed by Engineer in charge.
-
-
-
GROUND FLOOR
150
-
-
Providing, laying and fixing P.V.C. pipe of 32mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. As directed by Engineer in charge.
-
-
-
GROUND FLOOR
150
-
-
Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. As directed by Engineer in charge.
-
-
-
GROUND FLOOR
110
-
-
Providing, laying and fixing P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. As directed by Engineer in charge.
-
-
-
GROUND FLOOR
100
-
-
Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
BD.V 5 page 551 and as directed by Engineer in charge
-
-
-
GROUND FLOOR
1500
-
-
FIRST FLOOR
1500
-
-
SECOND FLOOR
1500
-
-
THIRD FLOOR
2000
-
-
Providing and fixing on walls/ ceiling/ floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
BD.V 5 page 551 and as directed by Engineer in charge
-
-
-
GROUND FLOOR
1500
-
-
FIRST FLOOR
1500
-
-
SECOND FLOOR
1500
-
-
THIRD FLOOR
2000
-
-
Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
BD.V 5 page 551 and as directed by Engineer in charge
-
-
-
GROUND FLOOR
1500
-
-
FIRST FLOOR
1500
-
-
SECOND FLOOR
1500
-
-
THIRD FLOOR
2000
-
-
Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
BD.V 5 page 551 and as directed by Engineer in charge
-
-
-
GROUND FLOOR
750
-
-
FIRST FLOOR
750
-
-
SECOND FLOOR
750
-
-
THIRD FLOOR
1000
-
-
Providing and fixing on walls/ ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
BD.V 5 page 551 and as directed by Engineer in charge
-
-
-
GROUND FLOOR
500
-
-
FIRST FLOOR
500
-
-
SECOND FLOOR
500
-
-
THIRD FLOOR
500
-
-
Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
BD.V 5 page 551 and as directed by Engineer in charge
-
-
-
GROUND FLOOR
200
-
-
FIRST FLOOR
100
-
-
SECOND FLOOR
100
-
-
THIRD FLOOR
200
-
-
Providing and fixing 50mm diameter water meter with non- return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber]. Bd.V.7 Page No. 554
2
-
-
Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32mm diameter P.V.C. flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.
-
-
-
GROUND FLOOR
14
-
-
FIRST FLOOR
14
-
-
SECOND FLOOR
8
-
-
THIRD FLOOR
8
-
-
Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete . Both side polish
Bd.M.35 B/Page No.393
-
-
-
GROUND FLOOR
13.5
-
-
FIRST FLOOR
13.5
-
-
SECOND FLOOR
8.1
-
-
THIRD FLOOR
8.1
-
-
Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63x45 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. BDV.-30 Page No.616
-
-
-
GROUND FLOOR
2
-
-
FIRST FLOOR
2
-
-
SECOND FLOOR
2
-
-
THIRD FLOOR
2
-
-
Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Bd.V.38, Page No. 572
60
-
-
Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete.
Bd.V.43, Page No. 574
20
-
-
Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Bd.V.43, Page No. 574
20
-
-
Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. Bd.V.46, Page No. 576
3
-
-
Providing and fixing Orissa Pan of size 580x445x260 mm with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100mm dia. C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge.
-
-
-
GROUND FLOOR
15
-
-
FIRST FLOOR
18
-
-
SECOND FLOOR
12
-
-
Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete. As directed by Engineer in charge
-
-
-
SECOND FLOOR
4
-
-
Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete. As directed by Engineer in charge
-
-
-
GROUND FLOOR
10
-
-
FIRST FLOOR
12
-
-
SECOND FLOOR
10
-
-
Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. As directed by Engineer in charge
-
-
-
GROUND FLOOR
15
-
-
FIRST FLOOR
18
-
-
SECOND FLOOR
12
-
-
Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. As directed by Engineer in charge
-
-
-
GROUND FLOOR
10
-
-
FIRST FLOOR
12
-
-
SECOND FLOOR
10
-
-
Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. As directed by Engineer in charge
-
-
-
GROUND FLOOR
1250
-
-
FIRST FLOOR
400
-
-
SECOND FLOOR
400
-
-
THIRD FLOOR
400
-
-
Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. As directed by Engineer in charge
-
-
-
GROUND FLOOR
1250
-
-
FIRST FLOOR
400
-
-
SECOND FLOOR
400
-
-
THIRD FLOOR
400
-
-
Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. As directed by Engineer in charge
-
-
-
GROUND FLOOR
350
-
-
FIRST FLOOR
350
-
-
SECOND FLOOR
350
-
-
THIRD FLOOR
350
-
-
Providing , laying and fixing ,jointing Eco- drain 160 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. As directed by Engineer in charge
500
-
-
Providing , laying and fixing ,jointing Eco- drain 200 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. As directed by Engineer in charge
750
-
-
Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Bd.V.41, Page No.573
750
-
-
providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m )
As directed by Engineer in charge
-
-
-
GROUND FLOOR
25
-
-
FIRST FLOOR
30
-
-
SECOND FLOOR
18
-
-
THIRD FLOOR
22
-
-
Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) As directed by Engineer in charge
-
-
-
GROUND FLOOR
50
-
-
FIRST FLOOR
50
-
-
SECOND FLOOR
30
-
-
THIRD FLOOR
30
-
-
Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete.
As directed by Engineer in charge
-
-
-
SECOND FLOOR
40
-
-
Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete. as directed by Engineer in charge.
-
-
-
GROUND FLOOR
10
-
-
FIRST FLOOR
12
-
-
SECOND FLOOR
10
-
-
THIRD FLOOR
22
-
-
Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete. As directed by Engineer in charge
-
-
-
GROUND FLOOR
1
-
-
FIRST FLOOR
1
-
-
SECOND FLOOR
4
-
-
THIRD FLOOR
14
-
-
RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge. As directed by Engineer in charge
-
-
-
GROUND FLOOR
2
-
-
RWH - Recharge Pit
Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge. As directed by Engineer in charge
-
-
-
GROUND FLOOR
2
-
-
Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge
-
-
-
GROUND FLOOR
1350
-
-
Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete of make Hindware(Matrix series 70002)/ Cera or equivalent as per the direction of Engineer-In-charge. As directed by Engineer-in-charge
-
-
-
GROUND FLOOR
4.7
-
-
FIRST FLOOR
4.7
-
-
SECOND FLOOR
4.7
-
-
THIRD FLOOR
4.7
-
-
Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2 NOS) Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make. As directed by Engineer-in-charge
-
-
-
GROUND FLOOR
1
-
-
FIRST FLOOR
1
-
-
SECOND FLOOR
1
-
-
THIRD FLOOR
1
-
-
Providing and fixing ISI marked double swing flush door shutters conforming to IS :2202 (Part I) Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel L- hinges with necessary screws Fittings & Fixtures per leaf SS kick plates on both sides of the door of 300mm height Heavy Duty satin finish butt SS Hinges (100mm x 75mm x 3mm in size) -4 nos. SS finished lever handle with mortise lock- 1 no. Floor spring- 1 No. 100mm x 100mm safety glass at the specified location. As directed by Engineer-in-charge
-
-
-
GROUND FLOOR
2.4
-
-
FIRST FLOOR
2.4
-
-
SECOND FLOOR
2.4
-
-
THIRD FLOOR
2.4
-
-
Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92 kg / r. metre. As directed by Engineer-in-charge
-
-
-
GROUND FLOOR
109.3
-
-
FIRST FLOOR
90.1
-
-
SECOND FLOOR
90.1
-
-
THIRD FLOOR
90.1
-
-
Transporation of material obtained from debries of various sorts including necessary excavation / loosing including loading, unloading, conveying & disposing as directed. For 5km
Spec. No. As directed by Engineer-in-charge
2073.45
-
-
Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW
2640
-
-
Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW.(Refer Foot Note No.3, on page no.19 for Two Way wiring.)
35
-
-
Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW
202
-
-
Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm(2+1E) FR grade copper wires, modular type switch and socket, earthing and required accessories as per specificationNo WG-PW/SW
612
-
-
Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW
485
-
-
Supplying and erecting ISI mark modular type switch one way 16 / 20 A, duly erected on provided plate and box with wiring connections complete with neon indicator
600
-
-
Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
600
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background
600
-
-
Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. Note: Add Rs 57/- for additional two module box with double mounting plate if required..
698
-
-
Supplying & erecting mains with 2x1.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire, in HMS PVC conduit min. 20mm dia as per specification No: WG-MA/PC. For lighting circuit
7954
-
-
Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia. as per specification No: WG-MA/PC. For Raw power
11328
-
-
Supplying & erecting mains with 4x6 sq.mm. and earth wire 4 sq.mm FRLSH PVC copper wire, in HMS PVC conduit min. 25mm dia, as per specification No: WG-MA/PC. (For SUBDB I/C Ckt.)
2970
-
-
Supplying, erecting & terminating XLPE armoured cable 2 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU. (For Lifts-7 No.)
510
-
-
Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU. (For Lift M/C-7 No.)
510
-
-
Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1kV.
605
-
-
Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL. (For LDB-BF,GF,1F,2F & 3F And Street Lights)
2480
-
-
Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (For Emegency Block-23kVA)
150
-
-
Supplying, erecting & terminating XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL.(For PDB-BF, GF,1F,2F & 3F And MED.DB Cable for Ward-1F, Ward-2F & SICU,MICU,OT,CCSD-3F)
2065
-
-
Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL. (For Pump Panel)
170
-
-
Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL. (For Fire Pump Panel)
210
-
-
Supplying, erecting & terminating XLPE armoured cable 1100 V. 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL. (For Radiotherapy(2R)-GF, LTPCC1 & 2(L&P) And LTMPCC1)
1170
-
-
Supplying, erecting & terminating XLPE armoured cable 3½core 240 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL. (For MRI & CT SCAN.)
230
-
-
Supplying , erecting & terminating 3 x 300 sq. mm. aluminium 11 kV(E), XLPE armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CB-HT (For VCB O/G-5 No.)
200
-
-
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (For Street Light Cable & 25Sqmm Cable)
2480
-
-
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (For 185Sqmm & 240Sqmm Cable.)
1400
-
-
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (For 300Sqmm Cable)
200
-
-
Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
350
-
-
Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
350
-
-
Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles) on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1
11
-
-
Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for SPMCB of 24 ways on iron / GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB
49
-
-
Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 6 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SWSWR/MCBDB( For Lifts)
7
-
-
Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 30A, 3 pin plug & earth socket and 30 A 3 pin plug top with 30A triple pole MCB complete erected on angle iron/ GI frame.( For EV Charging in Basement)
5
-
-
Supplying & erecting CRCA sheet metal one way enclosures suitable for D.P.M.C.B. /T.P. M.C.B. /F.P M.C.B. complete erected on angle iron/ G.I. frame.(For X-Ray room)
2
-
-
Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SWSWR/MCB
1200
-
-
Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SWSWR/MCB (For lift duct lighting)
7
-
-
Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB
88
-
-
Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300mA sensitivity and having capacity of 40A. 4 pole complete as per specification No. SWRCCB/RCCB
56
-
-
Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB
2
-
-
Providing & erecting 4 Pole MCCB of 315/400 A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB(See foot note No 1 on page 99 for 4P MCCB)
9
-
-
Providing & erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB(See foot note No 1 on page 99 for 4P MCCB)
35
-
-
Providing & erecting floor / wall mounting, MCCB panel board with door suitable for four pole incoming 400A, 8 ways four pole outgoing upto 100 A MCCB's on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCB'S)( L & P Main PCC And Med. Equip.Panel)
3
-
-
Providing & erecting incoming and outgoing cable alleys suitable for MCCB panel board with door of 250A incoming and 12 way outgoing or 400A incoming and 6/8 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB complete.
3
-
-
Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting,bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. (For fabrication of MCCB'S of MRI, CT SCAN & Radiotherapy)
170
-
-
Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. (For fabrication of MCCB'S of MRI, CT SCAN & Radiotherapy)
13.44
-
-
Supplying and Erecting approved make Compact Substation with 630 kVA, 3 phase, 50 Hz., ONAN type thermal class 10, 21kA for 3 Sec. SF6 insulated non-extensible compact switchgear (type DVNE/ RT2-NE) consisting of one no direct cable module and one no fixed manual vacuum circuit breaker in SF6 insulated stainless steel enclosure, with series trip, self powered microprocessor based numerical over current relay (IDMTL + Inst.) protection. Interconnection between HT switchgear and transformer shall be using 1Cx3x185 sq.mm aluminium unarmorured XLPE cable. copper wound transformer 630kVA 11kV/ 433V DYn11 oil filled, indoor type transformer bushings, hermetically sealed transformer with corrugated wall, without conservator type of design & top normal porcelain bushings for HT & LT with off load tap switch of rating +5% to -10% @2.5%. temp Rise - oil/winding 40/45°C losses (subject to IS 1180 Energy Efficiency level 2 ) - max @ 50% loading : as per IS 1180 and max @ 100% loading : as per IS 1180 and impedance as per IS 1180 with LV panel-1000 amps aluminium busbar (100% for phase and 50% for neutral, current density - 1 amp/sqmm) with outgoings 1000 A 433V 4P 50Hz 50 kA ICOG fixed manual type air circuit breaker (ACB) with microprocessor based release for overload , short circuit & earth fault protection, multifunctional meter with class 1.0 accuracy with RS 485 port, RYB, ON/OFF trip indications, outdoor enclosure having IP54 IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for transformer compartment, powder /colour coated enclosure, with interconnection between HT switchgear & transformer using 1Cx3x185 sq.mm XLPE aluminium single core cable. Interconnection between transformer & LT switchgear using aluminium busbars. internal earthling connections by using 50x6 mm GI strips including transformer neutral, complete with necessary permissions of Electrical Inspector as per specification no.SS TR/ COMP(2NO.FOR HVAC LOAD and 2No for Medical Load)
4
-
-
Supplying and Erecting approved make Compact Substation with 500 kVA, 3 phase, 50 Hz., ONAN type thermal class 10, 21kA for 3 Sec. SF6 insulated non-extensible compact switchgear (type DVNE/ RT2-NE) consisting of one no direct cable module and one no fixed manual vacuum circuit breaker in SF6 insulated stainless steel enclosure, with series trip, self powered microprocessor based numerical over current relay (IDMTL + Inst.) protection. Interconnection between HT switchgear and transformer shall be using 1Cx3x150 sq.mm aluminium unarmorured XLPE cable. copper wound transformer 500 kVA 11kV/ 433V DYn11 oil filled, indoor type transformer bushings, hermetically sealed transformer with corrugated wall, without conservator type of design & top normal porcelain bushings for HT & LT with off load tap switch of rating +5% to -10% @2.5%. temp Rise - oil/winding 40/45°C losses (subject to IS 1180 Energy Efficiency level 2 ) - max @ 50% loading : as per IS 1180 and max @ 100% loading : as per IS 1180 and impedance as per IS 1180 with LV panel-800 amps aluminium busbar (100% for phase and 50% for neutral, current density - 1 amp/sqmm) with outgoings 800 A 433V 4P 50Hz 50 kA ICOG fixed manual type air circuit breaker (ACB) with microprocessor based release for overload , short circuit & earth fault protection, multifunctional meter with class 1.0 accuracy with RS 485 port, RYB, ON/OFF trip indications, outdoor enclosure having IP54 IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for transformer compartment, powder /colour coated enclosure, with interconnection between HT switchgear & transformer using 1Cx3x150 sq.mm XLPE aluminium single core cable. Interconnection between transformer & LT switchgear using aluminium busbars. internal earthling connections by using 50x6 mm GI strips including transformer neutral, complete with necessary permissions of Electrical Inspector as per specification no.SS TR/ COMP(FOR L & P Load)
1
-
-
Supplying , erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 6 way outdoor, extensible motorised SCADA compatible RMU as per electric supply company specification consisting of 2 nos. feeder with load break switch and 4 nos. feeder with VCB as per specification no. SW-HTS / RMU SCADA (2LBS +4VCB)
1
-
-
Supplying , erecting, testing & commissioning 11kV, 630A, 21 kA / 3sec, 1 way outdoor, extensible motorised SCADA compatible RMU as per electric supply company specification consisting of 1 no. feeder with 1VCB as per specification no. SW-HTS / RMU SCADA(One VCB)
1
-
-
Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT
12
-
-
Supplying, erecting and commissioning of diesel generating set with alternator of 750 kVA output continuous rating, 3 phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising of meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG(2No For HVAC and 2No for Medical Equipments)
4
-
-
Supplying, erecting and commissioning of diesel generating set with alternator of 500 kVA output continuous rating, 3 phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising of meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG(For L & P Load)
1
-
-
Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 400 kVA upto 500 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GENAMF(10% in material cost is reduced as DG has standard control panel as per foot note on page 200)
1
-
-
Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 500 kVA upto 750 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GENAMF(10% in material cost is reduced as DG has standard control panel as per foot note on page 200)
4
-
-
Supplying, erecting, testing and commissioning of Microprocessor based generator control unit (synchronization panel) panel suitable for diesel generating set of above 500 kVA upto 750 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features and safeties etc as per specification no. GEN-SYNC.(Synchronisation of 2 Sets of DG Sets)(10% in material cost is reduced as DG has standard control panel as per foot note on page 200)
2
-
-
SITC of Electric Traction Passenger cum Stretcher/Hospital Lift with Job 1595934 305591 1901525 • Rated capacity :- 15 Passenger/1020Kg • Floors :- G+1 floor (2Stops/2 Landings)• Travel :- 3 to 4.2 mtrs
• Location of Lift Machine:- MR/MRL [applicable for Passenger Lift with MRL only & Stretcher/Hospital Lift with MR & MRL]• Rated speed :- 1.0mps VS
• Doors type :- COPO/TOPO Doors with frame having clear opening of 800/900/1000 mm wide x 2000mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves /frames.
Note: Other discription after above specifications shall be same as mentioned in CSR 21-22 of PWD with no.17.1.7 on Page No. 253-254.
2
-
-
Add On:- (A) For Lift travelling up to six floors or at a speed of 1.0 mps, add as below, For Lift having 900mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrowsindicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete
6
-
-
Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP(For Street light Poles)
110
-
-
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.
300
-
-
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP(For High Mast)
2
-
-
Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 kg Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI
23
-
-
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP
35
-
-
Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.
4
-
-
Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF
698
-
-
Supplying & fixing Anchor type fastener Fan hook, with 2 Nos of 10mm dia x 75 mm long with necessary materials for Ceiling Fan.
698
-
-
Supplying and erecting ‘B’ grade G.I.pipe/M.S. pipe down rod dulypainted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.
698
-
-
Supplying and erecting fresh air cum Exhaust fan of light duty250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wiremesh, duly erected in an approved manner and marking Sr. No. And date of erection.
56
-
-
Supplying and erecting LED square / circular 9W to 12W downlighter having pressure die- cast aluminum housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.
69
-
-
Supplying and erecting LED square / circular 16 to 20W downlighter having pressure diecast aluminimum housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.
1499
-
-
Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600x600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete.
305
-
-
Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall. As per specification no. FG IDF/BHF. (In Lift Duct)
42
-
-
Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete
220
-
-
Supplying & erecting integral post top lantern fixtures (globe type) suitable for LED lamp upto 12 W consisting of aesthetic round clear acrylic top cover, cast aluminium pole cap on provided pole /bracket as per specification no. FGODF/PTL(In Lawn)
100
-
-
Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL
110
-
-
Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT
110
-
-
Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No . FG-ODF/FLS2.
110
-
-
Supplying and erecting 16 m (clear height) High Mast (Top150mm, Bottom- 360mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 8 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation as per specification no. OH-PL/HM (excluding luminaries).
1
-
-
Supplying and erecting Outdoor Stand Mounted Feeder Pillar for highmast of the same manufacturer with 63A TPN MCB incomer, single dial timer switch, 45A TP contactor for automatic switching of luminaries, 2 nos 9A contactors and raise /lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self-lock, gasket and slanting top erected with CC foundation complete .(With foundation)
1
-
-
Supplying and erecting LED Flood light fitting of 120W, including lamp, with PF 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FGODF/FLS-2
8
-
-
Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).
110
-
-
Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 16 m raising lowering high mast).
1
-
-
Supplying and erecting modular type telephone socket one gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.
187
-
-
Supplying and erecting modular type computer Jack RJ 45 with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.
198
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
385
-
-
Supplying & erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW
9350
-
-
Supplying & erecting jelly filled unarmoured telephone copper cable 50 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW
100
-
-
Supplying, erecting & commissioning MDF Box 100 x 100 pairs as per specification No. WG-TW
4
-
-
Supplying, erecting & commissioning MDF Box 300 x 300 pairs as per specification No. WG-TW
1
-
-
Supplying & installing UTP networking Cat-6 cable suitable for LAN / WAN Computer networking as per specification No.WG-COC/NC
12400
-
-
Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC
198
-
-
Supplying and erecting LSZH armoured multimode optical fibre cable with 12 fibres, with core dia 50/125 µm (OM3), suitable for 1 gbps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC
390
-
-
Supplying, fixing, and configuring web smart power over ethernet switch of 24 ports on provided rack or as directed as per specification No. WG-NWC/ENS. (For CCTV)
2
-
-
Supplying, fixing, and configuring ethernet managed ethernet switch of 24 ports with 2 SFP + 2 combo port and web view/CLI on provided rack or as directed as per specification no. WG-NWC/GBS
11
-
-
Supplying, fixing, and configuring 1-port mini-GBIC SX mutli-mode fibre transceiver (up to 550m, support 3.3V power) as per specification complete.
11
-
-
Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP
11
-
-
Supplying and fixing 22 U floor mount rack (Dimension-DxW– 800x600x 1176mm) as per specification No. WG-NAS/RAK
4
-
-
Supplying & installing single mode fibre patch cord 3 m –duplex complete.
11
-
-
Supplying & laying HMS PVC conduit 20 mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
5500
-
-
Supplying & laying HMS PVC conduit 25 mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
16350
-
-
Supplying, installing, testing and commissioning with perfect aligning, proper levelling of fire service main single stage pump, of 2400 LPM at 76 m head centrifugal type, 75 HP (55 kW) 3 phase, 415 volt, 50Hz or of suitable HP complete as per specification no. FF-MFP/SSC
2
-
-
Supplying, installing, testing and commissioning with perfect aligning, proper levelling of jockey pump of 240 LPM at 105 m head 20 HP (15 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/JP
2
-
-
Supplying, installing, testing and commissioning with perfect aligning, proper levelling of booster pump of 900 LPM at 40 m Head, 12.5 HP (10 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/BP
1
-
-
Supplying & erecting automatic control panel for 3 Ph, 415 volt, a.c. Submersible/centrifugal pump set upto 20 HP consisting of Star Delta starter having relay range 13- 21Amp,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .
1
-
-
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete as
per specification no. FF-PP
3666
-
-
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete as
per specification no. FF-PP
1272
-
-
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as
per specification no. FF-PP
888
-
-
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as
per specification no. FF-PP
1098
-
-
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as
per specification no. FF-PP
1092
-
-
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete as
per specification no. FF-PP
24
-
-
Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.
510
-
-
Supplying and erecting 100 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS
3
-
-
Supplying and erecting 150 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS
3
-
-
Supplying & erecting cast iron double flange butterfly valve of size 50 mm dia. complete as per specification no. FF-VL/BFV
10
-
-
Supplying & erecting cast iron double flange butterfly valve of
size 75/80 mm dia. complete as per specification no. FF- VL/BFV
16
-
-
Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV
17
-
-
Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per specification no. FF-VL/BFV
20
-
-
Supplying & erecting cast iron double flange butterfly valve of size 200 mm dia. complete as per specification no. FF-VL/BFV
3
-
-
Supplying and erecting cast iron double flange NRV of size 75/80 mm dia complete as per specification no. FF-VL/NRV
2
-
-
Supplying and erecting cast iron double flange NRV of size 100 mm dia complete as per specification no. FF-VL/NRV
3
-
-
Supplying and erecting cast iron double flange NRV of size 150 mm dia complete as per specification no. FF-VL/NRV
3
-
-
Supplying & erecting gun metal gate valve of size 25 mm dia
complete as per specification no. FF-VL/GV
28
-
-
Supplying and erecting gun metal single outlet hydrant valve
fitted with necessary accessories complete as per specification no. FF-VL/HV
28
-
-
Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification no. FF-FFA/HV
14
-
-
Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL
56
-
-
Supplying & erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete
as per specification no. FF-FFA/NZ
28
-
-
Supplying and erecting fire brigade header of 150 mm dia, for supplying water in fire tank complete as per specification no.
FFFA/ FBC
2
-
-
Supplying and erecting fire brigade header (Siamese connection) of 150 mm dia for supplying water to wet riser system complete as per specification no. FF-FFA/SMC
4
-
-
Supplying and installing air vessel of 300 mm dia 1.5m in height M.S. tank installed inside pump house / on terrace
complete as per specification no. FF-FFA/ACT
2
-
-
Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-
FFA/ARV
13
-
-
Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per
specification no. FFFFA/ PG
47
-
-
Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per
specification no. FF-FFA/PS
6
-
-
Supplying and erecting one no. brass orifice plate having 6 mm. thickness, 140 mm outer dia and required/proper diameter of inner hole at every single outlet hydrant valve as
per specification no. FF-FFA/OP
28
-
-
Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box
28
-
-
Supplying, erecting, testing and commissioning of 15 mm (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no.
FF-SPR
1684
-
-
Supplying, erecting, testing and commissioning vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 100 mm dia having following features 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4) Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes
10
-
-
Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.
28
-
-
Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.
7
-
-
Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.
48
-
-
Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp
for erection on wall.
64
-
-
Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
56
-
-
Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per
specification no. CB-LT/AL
148
-
-
Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
56
-
-
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per
specification no. CBLT/ CU
180
-
-
Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
25
-
-
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording
the results as per specification no. EA-EP
2
-
-
Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per
specification no. EA-EP
2
-
-
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no
EA-EP.
68
-
-
Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making
the site good complete.
269
-
-
Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as
original.
118
-
-
Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
1457
-
-
Supply, installation, testing & commissioning of diesel engine driven common stand by pump, horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 2400 lpm at 76 mwc confirming to IS 5120-1977. The pump shall be coupled to suitable HP diesel engine and complete set shall be mounted on common base frame.
Batteries & battery leads with stand, fuel tank with standard other standard accessories, and foundation bolts, etc. complete.
1
-
-
Supply, installation, testing and commissioning of 150 mm dia. Installation Wet Alarm Valve with Water Motor Gong, Pressure Gauges, Test Lines with Ball Valves with necessary GI
(H) piping with threaded fittings of required sizes complete.
1
-
-
Providing and fixing UL/Fm listed SS braided flexible pipe 1000/1200mm long with accessories complete with all accessories specified in technical specifications(Size=15B)
1248
-
-
Supply installation testing, jointing and commissioning of Support comprising of threaded suspension rod with bullet fastener, threaded at both ends, flexible sleeve with supporting arrangement for sprinkler piping of various diameters , complete in all respect.
1684
-
-
Fabricating, supplying, testing and commissioning of electrical control panel of cubicle construction, floor mounted type, fabricated out of 2mm thick crca sheet, compartmentalized and hinged lockable doors, dust and vermin proof, powder coated approved shade, cable alley interconnection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc., complete in all respects, suitable for operation on 415V, 3 phase 50 Hz., AC supply with enclosure protection class IP-42 as required.
1
-
-
DIESEL ENGINE CONTROL PANEL: Control panel for Diesel Engine comprising:- Auto / Manual selector switch & 3 attempt starting device, timers and relays as required, push buttons, start / stop in manual mode. Indication lamp for High
/ Low Lub. Oil pressure, High Water Temp. and Engine ON indication. Battery charger suitable for 12 V / 24 V DC with boost and tickle selector switch, 0-15 V / 0-30 V DC volt meter, 0-20A DC Ammeter.
1
-
-
Supply, fixing & testing of illuminated LED Exit signage's with battery backup upto 8 hrs at prominent place for
identification in case of emergency.
120
-
-
Supply, Installation, Testing and Commissioning of Analogue addressable photo electric type smoke detectors with detector mounting base complete erected with required accessories. (Make Apolo /Honeywell / Siemens / Secutron)
798
-
-
Supply, Installation, Testing and Commissioning of Analogue addressable Manual call points (Break glass type/ pull station type) The same shall be made of ABSZ plastic square in shape surface/ flush mounting. With Break Glass massage embedded on the glass. Complete erected with mounting base and required accessories (Make Apolo /Honeywell /
23
-
-
Supply, Installation, Testing and Commissioning of Analogue addressable strobe cum sounder Made from ABS plastic material and having the dB level 190 dBs and a multi tone facility. The strobe shall be adjustable to 110 candelas Completed erected with mounting base abd required accessories. (Make Apolo /Honeywell / Siemens / Secutron)
23
-
-
Supplying, installing, testing and commissioning remote response indicators complete as per specification no. FF-
FAAS/RRI
138
-
-
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per
specification no. CBLT/ CU
7614
-
-
Supply, Installation, Testing and Commissioning of 10 Loop Microprocessor based analogue addressable type fire alarm control panel, min 125 detectors & 125 modules in single loop, minimum 120 character LCD display, suitable for 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and capable of operating the system for 30 min during an emergency condition. (Make Apolo /Honeywell / Siemens / Secutron)
1
-
-
Supply, Installation, Testing and Commissioning of Active Repeater Panel with minimum 40 characters LCD display, including cabinet & required accessories. (Make Apolo
/Honeywell / Siemens / Secutron)
1
-
-
Supply, Installation, Testing and Commissioning of analogue addressable monitor module with Surface/wall mounting back box & required accessories complete. (for Flow switch & third party integration). (Make Apolo /Honeywell / Siemens
/ Secutron)
10
-
-
Supply, Installation, Testing and Commissioning of analogue addressable control module with Surface/wall mounting back box & required accessories complete. (for Flow switch & third party integration). (Make Apolo /Honeywell / Siemens / Secutron)
23
-
-
Supply, Installation, Testing and Commissioning of analogue addressable Isolator module with Surface/wall mounting back box & required accessories complete. (Make Apolo
/Honeywell / Siemens / Secutron)
52
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements