Nagpur Metropolitan Region Development Authority Tender

Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.

Nagpur Metropolitan Region Development Authority - NMRDA Tender

Works

Civil And Construction

Building Construction

Civil Works

Eprocure

Nagpur, Maharashtra

Opening Date20 Apr 2023

Closing Date7 Jun 2023

Tender Amount₹ 1,30,81,81,967

Notes

Download

Costs

EMD
₹ 74,01,100
Document Cost
₹ 50,000
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2023_NMRDA_894592_1
Bid Award Id
View
Tender No
e-Tender Notice No. 02 / 2023-24
Tender Authority
Nagpur Metropolitan Region Development Authority View
Purchaser Address
-
Website
http://http://www.nmrda.org/

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Download All

Tender Notice-2507.1 kBAMENITY-(TOILET)-B...AMENITY-(TOILET)-BLOCK.pdf

Tender Notice-157.3 kBTendernotice_1.pdf

BOQ-11.5 MBBOQ_1558865.xls

Corrigendum-21.4 MBCorrigendumDekshab...CorrigendumDekshabhumi.pdf

Corrigendum-1246.3 kBcorrigendum1Deeksh...corrigendum1Deekshabhumi.pdf

40 More

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m)

Quantity6188

Rate-

Amount -

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means

Quantity24746

Rate-

Amount -

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.

Quantity5258

Rate-

Amount -

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

Quantity173

Rate-

Amount -

Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer) Natural river Sand

Quantity1723

Rate-

Amount -

Transportation of material obtained from debris of various sorts including necessary excavation/ loosing including loading, unloading and conveying and disposing as directed. For 5 Km.

Quantity32523

Rate-

Amount -

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural River Sand)

Quantity2194

Rate-

Amount -

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Quantity17

Rate-

Amount -

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

Quantity2937

Rate-

Amount -

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural River Sand )

Quantity4992

Rate-

Amount -

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural River Sand) GROUND FLOOR

Quantity2061

Rate-

Amount -

Quantity9

Rate-

Amount -

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural River Sand) GROUND FLOOR

Quantity1494

Rate-

Amount -

Quantity6

Rate-

Amount -

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural River sand ) GROUND FLOOR

Quantity3747

Rate-

Amount -

Quantity5

Rate-

Amount -

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural River Sand)

Quantity49

Rate-

Amount -

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural River Sand)

Quantity14

Rate-

Amount -

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. GROUND FLOOR

Quantity1767

Rate-

Amount -

Quantity3

Rate-

Amount -

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .

Quantity449

Rate-

Amount -

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.

Quantity292

Rate-

Amount -

Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Quantity1429

Rate-

Amount -

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete.

Quantity1593

Rate-

Amount -

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Quantity305.43

Rate-

Amount -

Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat molded PVC channel of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineer incharge,manufacturer'sspecification and drawing.

Quantity89

Rate-

Amount -

Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt.

Quantity27

Rate-

Amount -

Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)

Quantity492

Rate-

Amount -

Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Quantity1914

Rate-

Amount -

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. GROUND FLOOR

Quantity2565

Rate-

Amount -

Quantity71

Rate-

Amount -

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. GROUND FLOOR

Quantity369

Rate-

Amount -

Quantity41

Rate-

Amount -

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. GROUND FLOOR

Quantity3694

Rate-

Amount -

Quantity112

Rate-

Amount -

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. GROUND FLOOR

Quantity7265

Rate-

Amount -

Quantity180

Rate-

Amount -

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete

Quantity3346

Rate-

Amount -

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Quantity1483

Rate-

Amount -

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. GROUND FLOOR

Quantity20361

Rate-

Amount -

Quantity70.36

Rate-

Amount -

Providing groove to required size at specified location as directed by Engineer, at junction of brick masonry wall and R.C.C beams or Column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete.

Quantity261

Rate-

Amount -

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. GROUND FLOOR

Quantity31115

Rate-

Amount -

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. FIRST FLOOR

Quantity250.36

Rate-

Amount -

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete.

Quantity1500

Rate-

Amount -

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. GROUND FLOOR

Quantity31115

Rate-

Amount -

Quantity250.36

Rate-

Amount -

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Quantity30909

Rate-

Amount -

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

Quantity5490

Rate-

Amount -

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92x 31.75x 1.30 mm at weight 1.070 Kilogram/Running metre. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box

Quantity26

Rate-

Amount -

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box

Quantity157

Rate-

Amount -

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

Quantity15

Rate-

Amount -

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Quantity1042

Rate-

Amount -

Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete.

Quantity3638

Rate-

Amount -

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural River Sand) GROUND FLOOR

Quantity2

Rate-

Amount -

Quantity3

Rate-

Amount -

Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. Powder coated GROUND FLOOR

Quantity16

Rate-

Amount -

Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 99%,NRC 0.5, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , with Recycled content of 35 %. The tile shall be laid on precoated G.I.channel height 32 with 15 mm wide T - section flanges colour white having rotary stitching and XL2 CLIP on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.57 Kilograms/M2 and pull out stength of minimum 100 Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty.approved as per GRIHA and BS 476 etc. complete.

Quantity151

Rate-

Amount -

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Quantity19287

Rate-

Amount -

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Quantity59

Rate-

Amount -

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/ gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural River sand)

Quantity111

Rate-

Amount -

Providing and fixing Indian teak wood joists and girders in timber floors of single, double or framed type including scaffolding if necessary, and one coat of primer etc. complete.

Quantity4

Rate-

Amount -

Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary.

Quantity120

Rate-

Amount -

Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame)

Quantity42.28

Rate-

Amount -

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Quantity30

Rate-

Amount -

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Quantity9

Rate-

Amount -

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

Quantity22

Rate-

Amount -

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear)

Quantity7.5

Rate-

Amount -

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Quantity160

Rate-

Amount -

Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 900 mm out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Quantity20

Rate-

Amount -

Providing and erecting Overhead signs made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressuresensitive/heat activated adhesive retoreflective specified background, border and back side retoreflctive symbols, letters, numerals, arrowas per IRC:67-2012, with designed back support frame of mild steel angle with vertical and lateral clearance given in clause 801 and 802, duly painted on back side with two coats of grey stove enamel paint and installed as per clause 802.6 over a designed support system of structural steel wrktrestles and trusses of sections and type as per structural design requirements and approved plans including painting with one coat of epoxy primer and two coats of epoxy finish paint. The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. ClassB (Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in2 mm aluminum sheet of Class B

Quantity20

Rate-

Amount -

Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.

Quantity618

Rate-

Amount -

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Quantity16

Rate-

Amount -

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Quantity274

Rate-

Amount -

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.

Quantity492

Rate-

Amount -

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete

Quantity49

Rate-

Amount -

Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand)

Quantity16366

Rate-

Amount -

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

Quantity6.71

Rate-

Amount -

Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen ( excluding reinforcement) with Natural sand etc. complete

Quantity619

Rate-

Amount -

Providing internal cement plaster 20mm. thick in Single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.

Quantity1183

Rate-

Amount -

Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Quantity4045

Rate-

Amount -

Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 m x 2.40 m with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150Kilogramcapacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.Complete

Quantity10.5

Rate-

Amount -

Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including hand packing filling gravel / sand in the voids etc. complete.( Natural River Sand )

Quantity166

Rate-

Amount -

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Quantity1744.25

Rate-

Amount -

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )

Quantity14893

Rate-

Amount -

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete)

Quantity5944

Rate-

Amount -

Providing and laying a woven Polypropylene Geotextile of Type-III manufactured from black UV stabilised Polypropylene Tape yarn on the prepared subgrade as the separator cum reinforcement with necessary overlap as per drawing. ( For use this item SE/CE permission is obligatory.)

Quantity2899

Rate-

Amount -

Providing and laying perforated PVC 160 mm dia pipe in proper line,leveland slope including necessary material fitting etc. complete.

Quantity173.4

Rate-

Amount -

Providing and applying required coats of a water based Evercrete Deep Penetrating Sealer (DPS) on cement concrete surface like roads, beams, and columns, plastered walls, basements, roofs, potable water tanks etc to react with cement and to penetrate concrete structure thereby making it resistant to chemicals / chlorides water to make it dust proof and to act as a water resistant at the same time which Strengthens the treated surface and reduce the curing period etc complete. - Note -- for item Number 7 to 4 prior approval of Superintending Engineer will be necessary

Quantity829

Rate-

Amount -

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete.

Quantity522

Rate-

Amount -

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete.

Quantity503

Rate-

Amount -

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Quantity271

Rate-

Amount -

Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.

Quantity279

Rate-

Amount -

Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete.

Quantity28

Rate-

Amount -

Removing wooden or A.C. partition including frame work and stack-ing the materials as with all leads, lifts etc. complete.

Quantity28

Rate-

Amount -

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Quantity342

Rate-

Amount -

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete

Quantity15044

Rate-

Amount -

Removing iron pipe raling having wooden R.C.C. or C.C. or iron post and stacking the materials as directed etc. complete.

Quantity799

Rate-

Amount -

Removing earthen, stonewate pipe and stacking them as directed with all leads, lifts etc. complete.

Quantity100

Rate-

Amount -

Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all leads, lifts etc. complete.

Quantity100

Rate-

Amount -

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.

Quantity547

Rate-

Amount -

Removing Np-2 and Np-3 class pipes including stacking at road side as directed by the Engineer in charge. Upto 900mm dia. etc complete.

Quantity100

Rate-

Amount -

Dismantling brick masonry in Mud and stacking the materials as directed with all leads, lifts etc. complete.

Quantity329

Rate-

Amount -

Cutting down trees including trunks and branches with girths above 450cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any.

Quantity100

Rate-

Amount -

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means

Quantity4.5

Rate-

Amount -

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means

Quantity277

Rate-

Amount -

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural River sand )

Quantity378

Rate-

Amount -

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.

Quantity829

Rate-

Amount -

HORTICULTURAL WORK

Quantity-

Rate-

Amount -

Preparing Lawn (20cm. Depth) ;- Execavating the ground to a required depth of 20cms, removing & conveying unwanted stuff to a required distance as directed, Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30cms, Mixing garden soil and manure thoroughlywell, levelling, watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling etc, complete.

Quantity7867.85

Rate-

Amount -

FARM YARD MANURE :- Supplying on site well decayed well dired, well powdered, without elods and free from stone, dried grass and other rubbish material, The colour of the manure generally be blank. The manure will be measured by measuring box. (Farma) Item includes Transporting, loading-unloading etc. (Lead charges per 26km. are considered.) (As per the Approved quotation attached)

Quantity285

Rate-

Amount -

GARDEN SOIL :- Supplying on site garden soil well sleved 90% to pass through I.S. slove of 10mm size free from stones eubbish like dried grass roots and other such materials. The soil should be fresh from quarry, The colour of the soil generally be red. The soil will be measured by measuring box. (Farma) Item includes royalty charges, octroi,corporation Tax Transporting Loading-unloading wtc. (Lead charges per 26km considered) (As per the Approved quotation attached)

Quantity680

Rate-

Amount -

Planting large flowering/Shady Tree (Ht. 2 mtr.) :- Digging pit with size 0.9m x 0.9m x 0.9m removing and conveying unwanted stuff to a requried distance as directed. Filling the pit with approved excavated material upto a heaight of 0.30m. And remaining height of 0.60m with fresh garden soil & manure in 3:1 proportion Mixing soil & manure thoroughly well, leveling, as directed, watering previous night, planting two to three year old minimum 2.0 Mtr. height, healthy trees sapling as per specifications. Maintaining till well established by watering, weeding, stirring of soil replacing of casualties etc. complete.

Quantity185

Rate-

Amount -

Planting small and medium size ornamental/ Flowering plant :- Digging pit with size 0.6m x 0.6m x 0.6m removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil & Farm Yard Manure upto a height of 0.60m in 3:1 proportion. Mixing soil and Manure thoroughly well, levelling, watering on previous night. Planting one to two year old healthy plant saplings as per specification. Maintaining till well established by watering, stirring, of soil and manure, replacing casualties, etc. complete.

Quantity500

Rate-

Amount -

Preparing flower Bed :- Execavating the ground to a required depth of 30cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure in excavated area in 3:1 proportion to a required height of 30cms. Mixing garden soil and manure thoroughly well, levelling, watering on previous night. Planting seedlings of annuals 25cms. apart maintantning till well established by watering weeding, clipping, Stirring replacing of casualties etc. complete.

Quantity100

Rate-

Amount -

Suppling of flowering / shady trees, Gulmohar, Raintree, Peltophorum etc. in polybag (ht. upto 2-2.5mtr.)

Quantity100

Rate-

Amount -

Suppling of small & medium Ornamental flowering plants, Thuja, Cupresus, Ornamental Ficus, Mussanda etc.

Quantity100

Rate-

Amount -

Ready to fix lawn turf in slabs or rolls. Lawn grass suckers should be fress green free from weeds, insects and diseases.

Quantity200

Rate-

Amount -

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.

Quantity4339

Rate-

Amount -

Stone work for cladding, carving, moulding, cornices, string, courses etc.(by using 5axis Italian CNC machine ± 1mm tolerance maximum), ornamental work, traditional work, figure work (below under mentioned type, thickness, any size) in Sandstone, etc. for below mentioned items : Providing and fixing Stone work ashlar sunk Shivpuri or Gwaliar White sand stone or moulded or sunk and moulded upto required level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with and admixture of pigment matching the stone shade, Triangular/ Square/ rectangular/ circular/ polygonal/moulding/ carving pillars, Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical etc including rubbing, curing and polishing etc including transportation, loading, unloading, using mechanical equipments/machine, stacking, scaffolding ( For all heights), cleaning , fixing, joint filling, polishing, grinding, necessary lifting machinery, placing, etc. complete. (prior approval of sample/ brand by exec. engineer is necessary before use ) complete in all aspects as per architect specifications/ drawing and as directed by engineer in charge.

Quantity848

Rate-

Amount -

Stone work for cladding, carving, moulding, cornices, string, courses etc.(by using 5axis Italian CNC machine ± 1mm tolerance maximum), ornamental work, traditional work, figure work (below under mentioned type, thickness, any size) in Sandstone, etc. for below mentioned items : Providing and fixing Shivpuri or Gwaliar White sand stone work in capitol/copings, cornices, string courses and plinth courses, upto required thickness in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade, Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical etc including rubbing, curing and polishing etc including transportation, loading, unloading using mechanical equipments/machine , stacking, scaffolding ( For all heights), cleaning , fixing, joint filling, polishing, grinding, necessary lifting machinery, placing, etc. complete. (prior approval of sample/ brand by exec. engineer is necessary before use ) complete in all aspects as per architect specifications/ drawing and as directed by engineer in charge.

Quantity1327

Rate-

Amount -

Stone work for cladding, etc. (by using 5axis Italian CNC machine ± 1mm tolerance maximum), (below under mentioned type, thickness, any size) in Sandstone, etc. for below mentioned items : Providing and fixing Shivpuri or Gwaliar White sand stone 30-40mm thick stone dry cladding upto required heights with of uniform colour and size upto or above 1mx1m, fixed with the help of fixing adjustable brass cramps of approved quality required shape and size adjustable with nuts, bolts, and washer( total weight not less than 260 gms) including making necessary recesses in stone slab, drilling required holes etc. and sealing the joints with approved weather sealant on walls at all heights, Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical etc including rubbing, curing and polishing etc including transportation, loading, unloading, stacking, scaffolding ( For all heights), cleaning , fixing, joint filling, polishing, grinding, necessary lifting machinery, placing, etc. complete. (prior approval of sample/ brand by exec. engineer is necessary before use ) complete in all aspects as per architect specifications/ drawing / design and as directed by engineer in charge

Quantity10961

Rate-

Amount -

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door S.S 304 Grade fittings (Door handle, lock and stopper, Pivot, floor sping (appox 100 to 120 kgs) , lock etc.complete in all aspects as per manufacturer / architect specifications and as directed by engineer in charge.

Quantity73

Rate-

Amount -

Providing and fixing 12 mm thick frameless toughened glass partitions of approved brand and manufacturer, including providing and fixing partitions at top & bottom with aluminum channel etc. with necessary S.S 304 grade fittings and fixtures etc. complete in all aspects as per manufacturer / architect specifications and as directed by engineer in charge.

Quantity226

Rate-

Amount -

TENSILE FABRIC WITH STRUCTURE Providing, Fabricating, Assembling, painting, hoisting & erecting MS Built-up section/Tubular Structure ( MS built-up section:-Rolled section & plates confirming to IS 2062 minimum required grade E250,Tubular Structure:- made from Steel hollow sections, ISI marked from SAIL / RINL / TATA/JINDAL conforming to IS 1161/4923/1239, minimum required Grade YST 240, in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections etc., required for all operations involved. The item shall be executed as per approved drawings and direction of the Engineer-in-Charge. The Tensile membrane should be Type II fabric make of Mehler Texnologies or equivalent approved make having a minimum weight of 900 g/sqm, minimum tensile strength of 4300/4200 N/50mm and minimum tear strength 500/500N as per manufacturers specification with a 20 years warranty etc. over steel frames with all fittings and fixtures complete as per Drawing / Detail & as per technical specifications and as per the instructions of Engineer-in-charge.(Rate includes cost of fabric , shop drawings, patterning, forming, cutting, fabrication, high frequency welding of fabric, Transport to the site, assembling and installation with GI cables, hardware, Alluminium flat, EPDM gasket and required accessories wherever required for all operations in all respect as per direction of Engineer-In-Charge). (Note :Actual Surface area of fabric shall only be measured for payment.)

Quantity2029

Rate-

Amount -

Stone work for treads and risers of steps and staircases, etc. (by using 5axis Italian CNC machine ± 1mm tolerance maximum), traditional work, figure work (below under mentioned type, thickness, any size) in Granite etc. for below mentioned items : Providing and fixing polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Quantity245

Rate-

Amount -

Stone work for flooring, etc. (by using 5axis Italian CNC machine +-1mm tolerance maximum), traditional work, figure work (below under mentioned type, thickness, any size) in Italian etc. for below mentioned items : Providing and laying 16 to 18 mm thick Italian Marble stone flooring , Perlato, Rosso verona, Fire Red or Dark Emperadore etc, mirror polished, laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc including transportation, loading, unloading, stacking, scaffolding ( For all heights), cleaning , fixing, joint filling, polishing, grinding, necessary lifting machinery, placing, etc. complete. (prior approval of sample/ brand by exec. engineer is necessary before use )complete in all aspects as per architect specifications/ drawing and as directed by engineer in charge.

Quantity953

Rate-

Amount -

Stone work for cladding, etc. (by using 5axis Italian CNC machine +-1mm tolerance maximum), (below under mentioned type, thickness, any size) in Italian etc. for below mentioned items : Providing and fixing 16 to 18 mm thick Italian Marble stone, Perlato, Rosso verona, Fire Red or Dark Emperadore etc., mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc including rubbing, curing and polishing etc including transportation, loading, unloading, stacking, scaffolding ( For all heights), cleaning , fixing, joint filling, polishing, grinding, necessary lifting machinery, placing, etc. complete. (prior approval of sample/ brand by exec. engineer is necessary before use ) complete in all aspects as per architect specifications/ drawing and as directed by engineer in charge.

Quantity218

Rate-

Amount -

Stone work for plain/design flooring, etc. (by using gang saw cut), (below under mentioned type, thickness, any size) in Sandstone etc. for below mentioned items : Providing and fixing 40 mm thick rubbed white Shivpuri or Gwaliar Sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar, etc complete including transportation, loading, unloading, stacking, scaffolding ( For all heights), cleaning , fixing, joint filling, polishing, grinding, necessary lifting machinery, placing, etc. complete. (prior approval of sample/ brand by exec. engineer is necessary before use ) in all aspects as per architect specifications/ drawing and as directed by engineer in charge.

Quantity3095

Rate-

Amount -

Stone work for jali etc. (by using 5axis Italian CNC machine ± 1mm tolerance maximum), ornamental work, traditional work, figure work (below under mentioned type, thickness, any size) in Sandstone etc. for below mentioned items : Providing and fixing stone Shivpuri or Gwaliar White sand stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab with or without any chamfers, Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical etc including rubbing, curing and polishing etc including transportation, loading, unloading, stacking, scaffolding ( For all heights), cleaning , fixing, joint filling, polishing, grinding, necessary lifting machinery, placing, etc. complete. (prior approval of sample/ brand by exec. engineer is necessary before use ) complete in all aspects as per architect specifications/ drawing / design and as directed by engineer in charge etc complete in all aspects as per architect specifications/ drawing / design and as directed by engineer in charge.

Quantity562

Rate-

Amount -

"Waterproofing Treatment for Landscaping Decks Polyurethane based waterproofing system for podium and landscape decks Providing and Supplying single component Pitch Free PU ( Polyurethane Coating) @ 1.3 mm minimum DFT including Below mentioned steps 1st Step Surface Preparation: RCC Surfaces must be clean, even and sound concrete. Remove all oil, dirt, laitance, protrusions(by light grinding) and other contaminants manually to attain a fairly smooth surface. 2nd Step Crack treatment: Cutting and opening cracks to a depth of 10mmx10mm in V shape by mechanical means. cleaning all the dirt and loose particles by air pressure and wetting crack to attain SSD condition. filling the crack using Nitobond SBR Latex having specific gravity ranging from 1.015 to 1.040 @ 27 deg Celsius mixed in the ratio of 1(polymer):3 (cement ) maintaining W/C ratio to 0.35 to achieve thixotropic consistency . Product should be tested in accordance with BS 6319. 3rd Step Bore Packing : Use Nitobond SBR or equivalent approved make as bonding agent over pipe and Internal side of concrete followed by filling high strength non shrink grout Conbextra GP2 in the gap around pipes up to 20mm (between pipe and concrete) before treating the surface with Waterproofing layer. 4th Step Coving: Providing and applying Cement Mortar 1:4 admixed with Nitobond AR having 43% solid contents at the junction of slab and vertical offsets. Nitobond AR mixed cement mortar shows 75% improvement in adhesion (slant shear strength N/mm2 as per BS 6319) than control samples. 5th Step Waterproof coating : Providing and applying waterproofing treatment to sound, moisture free concrete surface using Nitoproof 600PF- manufactured by Fosroc Cheicals India Pvt Ltd. Nitoproof 600 PF or equivalent approved make is liquid applied single component pitch free polyurethane coating capable of bridging substrate cracks upto 2 mm. It shall be applied in two coats at coverage rate of 2.25kg/sqm to a achieve a minimum DFT of 1.3 mm Or WFT of 1.5 mm. The membrane formed shall confirm to following minimum properties: i) Elongation : 400% as per ASTM D 412 ii) Tensile Strength : 2.5 N/mm2 as per ASTM D 412 iii) Adhesion in-peel test : 50 N as per ASTM C- 836 iv) Recovery from 350% elongation : 95% as per ASTM D 412 v) Water Vapour Transmission 2.3mm film: 0.6 g/m2/hr vi) Initial Hardness Shore A : min 60 as per ASTM D 2240 vii) Root resistant : protection screed required Membrane Termination shall be done 300 mm above FFl by providing a groove cut of 15mm x 15mm & filling it with elastomeric sealant like Nitoseal PU40 of fosroc or equivalent approved make. System includes supply , application and termination of coating all complete as per manufactured specification methodology or as per direction by engineer-in-charge complete. 6th Step Separation layer : Providing and installing minimum 150 GSM non-woven geotextile membrane over the finish waterproofing treatment prior to protection screed. Geotextile to be overlapped for 100 mm and spot stuck with adhesive/hot air gun Laying of Protection screed of average 50 mm thick in slope using M20 grade concrete over geotextile as per recommendations (screed concrete to be paid separately) "

Quantity13165

Rate-

Amount -

Providing and fixing mild steel framework with design of cast iron ( Weight of M.S =65 Kg / Sqm + Weight of CI =30 Kg/ Sqm as per detailed drawing and design provided by the project consultant / Architect including all fixtures necessary ,welding ,transportation, loading unloading installation with hydra and similar equipments fixing done with hilti make HRD C Anchor bolts comprising of polyamide PA6 Grade sleeve and coated anti corrosive primer and two coats of oil painting etc complete as approved by engineer consultant/ Engineer- in charge MS gate with CI (65+30 ) KG / SQM P/F Mild steel grill work with coat iron casting ( 50 kg/Sqm ) etc complete in all aspects as per architect specifications/ drawing / design and as directed by engineer in charge

Quantity109

Rate-

Amount -

Stone work for cladding, etc. (by using 5axis Italian CNC machine ± 1mm tolerance maximum), ornamental work, traditional work, figure work (below under mentioned type, thickness, any size) in Sand stone, etc. for below mentioned items : Providing and fixing Stone 30mm thick Shivpuri or Gwaliar White sand stone for wall lining etc. (veneer work) upto required height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade with secured to the backing and the sides by means brass cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole for pins and fasteners etc complete in all aspects including transportation, loading, unloading, stacking, scaffolding ( For all heights), cleaning , fixing, joint filling, polishing, grinding, necessary lifting machinery, placing, etc. complete. (prior approval of sample/ brand by exec. engineer is necessary before use ) in all aspects as per architect specifications/ drawing and as directed by engineer in charge.

Quantity955

Rate-

Amount -

Providing and fixing double leaf panelled door shutter including frame with 460 x 150 mm thick as per detailed architectural drawing ( Enclosed) consisting panelled vertical styles 230 mm x 200 mm and top and bottom rail 235 mm x 200 mm and panels 50 mm thick country teak wood including vertical and horizontal styles with carving, engraving, and brass fixtures and fastening and T.W. beading at junctions of panel inserts with 3 coats of wood polish etc.complete in all aspects as per architect specifications / drawing and as directed by engineer in charge.

Quantity93

Rate-

Amount -

Stone work for flooring, etc. (by using 5axis Italian CNC machine ± 1mm tolerance maximum), traditional work, figure work (below under mentioned type, thickness, any size) in Granite etc. for below mentioned items : Providing and laying in position flooring of telephone black /Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Quantity3916

Rate-

Amount -

Stone work for flooring, carving, moulding, cornices, string, courses etc. (by using 5axis Italian CNC machine +-1mm tolerance maximum), ornamental work, traditional work, figure work (below under mentioned type, thickness, any size) in Sandstone etc. for below mentioned items : Providing and fixing 40 mm thick rubbed white Shivpuri or Gwaliar Sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar, etc complete including transportation, loading, unloading, stacking, scaffolding ( For all heights), cleaning , fixing, joint filling, polishing, grinding, necessary lifting machinery, placing, etc. complete. (prior approval of sample/ quality/moulding etc by exec. engineer is necessary before use ) in all aspects as per architect specifications/ drawing and as directed by engineer in charge.

Quantity81

Rate-

Amount -

Replantation of Trees of various girth sizes including digging out the tree from roots, cutting and disposing extra branches, transporting the tree to the place of plantation, necessary excavation, watering , refilling, labour, machinery etc as directed by engineer in charge and maintaning the transplanted tree till well established by watering , weeding , stirring the soil and clipping if necessary and maintaning for 6 months etc complete.

Quantity100

Rate-

Amount -

Rebaring of various TMT bars of requried depth and dia,wise drilling size by hilti rebar grouting method and refilling by RE-500 Chemical of requried quanitity including all necessary equipment and as directed by Engineer in charge etc complte. ( Including staging ) 8 mm dia 100 mm deep

Quantity50

Rate-

Amount -

Quantity50

Rate-

Amount -

Quantity50

Rate-

Amount -

Quantity50

Rate-

Amount -

Supply and fixing of TRACDEK Double Skin Insulated roofing system comprising external sheet of TRACDEK Klippon profiled sheeting 406 mm cover width, 41 mm crests @ 203 mm c/c manufactured out of 0.58 mm TCT (total coated thickness) SMP coated Galvalume (275 Mpa yield stress) steel. The sheet shall have wide pans with stiffening ribs for effective water shedding and special male/ female ends on side-laps for purlin support and anti-capillary flute in side lap. The sheet shall have a hot-dip metallic coating of zinc aluminium alloy coating mass total of both sides, AZ-150 as per AS-1397 ) having 275 Mpa yield stress. The sheet shall be coated with exterior coat of Silicon Modified Polyester paint, 20 microns top coat applied over 5 micron primer and conversion coat and a 5 micron polyester back coat. The external sheets shall be fixed to G.I sub-girts with clips and no fasteners to penetrate the sheeting. The clip should lock over the male rib and into the underside of the centre and female ribs and shall be fastened to support with wafer-head self-drilling zinc-coated fasteners. The internal sheeting shall be TRACDEKHi-Rib profiled sheets manufactured out of 0.50 mm TCT SMP GALVALUME Hi-Tensile Steel (150gsm, zinc aluminum alloy coating mass total of both sides,AZ-150 as per AS-1397 ) having 550 Mpa yield strength. The sheet shall be coated with exterior coat of Silicon Modified Polyester paint, 20 microns top coat applied over 5 micron primer and conversion coat and a 5 micron polyester back coat. The sheets shall have 1020 mm cover width, 28-30 mm high crests at 250 mm wide pans with special male/female side-laps and anti-siphoning feature to prevent leakages. The pan shall be stiffened by using 3 small ribs. The Sub-Girts Of Size 50mm X 50mm X 50mm X 1.6mm Manufactured Out of 18(G) G.I. ‘ Z ’ Shape would be fixed to Inner liner on face Side at Purlin Locations by means of Galvanised Self Drilling self tapping fasteners thru the crest. An Insulation of 50mm thick glass wool insulation16 Kg/M3 - Density wrapped in polythene bags shall be laid over the internal sheeting and G.I. sub girts are held between the external and internal sheets. The sheets shall be supplied in lengths maximum upto 6 - 12 metres to suit site dimensions Flashing, Cappings and Ridges manufactured out of same materials of rate in same thick as mentioned above in standard lengths of 2.5 Mtr and fixed by means of hex-head self drilling stitching screws etc complete including all fixing fixture, labour, machinery, etc. needed for finishing, erecting at any height as per drawing and as per direction of engineer in charge.

Quantity195

Rate-

Amount -

Providing & fixing 38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished etc including transportation, loading, unloading, stacking, scaffolding ( For all heights), cleaning , fixing, joint filling, polishing, grinding, necessary lifting machinery, placing,etc. complete. (prior aproval of sample/ brand by exec. engineer is necessary before use ) as directed by engineer in charge .complete in all aspects as per architect specifications/ drawing and as directed by engineer in charge.

Quantity195

Rate-

Amount -

Stone work for carving, moulding, cornices, string, courses etc. (by using 5axis Italian CNC machine ± 1mm tolerance maximum), ornamental work, traditional work, figure work (below under mentioned type, thickness, any size) in Marble etc. for below mentioned items : Solid Marble stone Providing and fixing Solid Ambaji White marble stone work for Ashok Stambha including cladding, carving, moulding, cornices, string, courses etc. , ornamental work, traditional work, figure work (any type, any size any thickness) rubbing, curing and polishing etc including transportation, loading, unloading using mechanical equipments/machine , stacking, scaffolding ( For all heights), cleaning , fixing, joint filling, polishing, grinding, necessary lifting machinery, placing, etc. complete. (prior approval of sample/ brand by exec. engineer is necessary before use ) complete in all aspects as per Architect specifications/ drawing and as directed by Engineer in

Quantity9.03

Rate-

Amount -

Supply and fixing of 20 gauge Stainless steel plates of garde 304 engraved with approved matter writing all complete as per sample approved and fixed with two rawls plugs stainless stell srew/ double side tape of 3M or approved equivalent make required nos of holes, Wherever required complete as per direction of Unit Incharge engineer.

Quantity2103232

Rate-

Amount -

Supply and fixing of emeragency sign boards size of required size made out of 3mm thk acrylic sheet/ Sun boars/ ACP sheet Green /Red Colour Glow Night Tape pasted on sheet with single side writing with fixing om wall fixed with stainless steel srew/ double side tape of 3M or approved equivalent make required nos of holes wherver required complete as per direction.

Quantity1046901

Rate-

Amount -

Supply & fixing of Retro reflective signboard made out of 3mm thick Aluminum composite panel with face fully covered with retro reflective sheeting of single side of approved shade and make. the letters and graphics pf signboard shall be eletrocut by plotter cutter in another retro reflective sheet retro reflective approved shade and make .the signboard should be fixed on wall, complete all as specified.

Quantity83.61

Rate-

Amount -

Supplying & fixing of retro reflective sign board of size 900 mm x 600 mm. The board made of High intensity prismatic grade type IV retro reflective sheeting as per I.R.C. / M.O.S.T. with message and graphics to be overlay film of same make duly plotter cut, letters written (both sides) in white colour, to be pasted on 3mm thick ACP sheet.The back side of frame shall be covered with 3mm ACP sheet..the signboard should be fixed and riveted on a support frame of 38 mm x 16 gauge dia ,stainless steel and post of 75 mm x 2 Nos, 16 gauge dia stainless steel pipe fixed with a foundation of 30 x 30 x 50 mm cement concrete. as specified and approved complete all as specified.

Quantity20

Rate-

Amount -

Supplying & fixing of retro reflective sign board of size 1200 mm x 900 mm. The sign board made of High intensity prismatic grade type IV retro reflective sheeting as per I.R.C. / M.O.S.T. with message and graphics to be overlay film of same make duly plotter cut, letters written (single side) in white colour, to be pasted on 3mm thick ACP sheet. The backside of frame shall be covered with 3mm ACP sheet. Frame made of 40mm dia pipe & 2 no 63mm diavertical posts 16 gauge dia stainless steel pipe fixed with a foundation of 30 x 30 x 50 mm cement concrete. as specified.

Quantity5

Rate-

Amount -

Supply & fixing of Retro reflective sign board of size 1800 mm x 1200 mm.The sign board made of High intensity prismatic grade type IV retro reflective sheeting as per I.R.C. / M.O.S.T. with message and graphics to be overlay film of same make duly plotter cut, letters written (both sides) in white colour, to be pasted on 3mm thick ACP sheet. The backside of frame shall be covered with 3mm ACP sheet. Frame made of 40mm dia pipe & 2 no 63mm diavertical posts 16 gauge dia stainless steel pipe fixed with a foundation of 30 x 30 x 50 mm cement concrete. as specified.

Quantity3

Rate-

Amount -

PLUMBING WORK :-

Quantity-

Rate-

Amount -

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63x45 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. Sanitary Fixtures & CP Brass Fittings

Quantity14

Rate-

Amount -

Providing and fixing Autoclosing pillar cock of pressmatic tap of Jaguar make or equivalent including all fixtures, fittings etc. complete.

Quantity8

Rate-

Amount -

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Quantity49

Rate-

Amount -

Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete.

Quantity92

Rate-

Amount -

Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete.. As directed by Engineer in charge.

Quantity55

Rate-

Amount -

Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. As directed by Engineer in charge.

Quantity29

Rate-

Amount -

Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. As directed by Engineer in charge

Quantity26

Rate-

Amount -

Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook of jaquar (Cat. No. ALD 563 ) or equivalent approved make including necessary sockets / union nut etc. complete as directed by Engineer incharge.

Quantity55

Rate-

Amount -

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195 mm size with pillar cock, C.P. Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection upto the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Frame work, etc. Complete as directed by Engineer incharge.

Quantity49

Rate-

Amount -

Providing and fixing Orissa Pan of size 580x445x260 mm with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100mm dia. C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge.

Quantity29

Rate-

Amount -

Providing and fixing white glazed urinal of size 710 x 460 x 300 mm with sensotronic concealed type flushing valve for urinal with complete kit having fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc complete.

Quantity29

Rate-

Amount -

Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2 NOS) Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make. As directed by Engineer-in-charge

Quantity6

Rate-

Amount -

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks,foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting,roughening them if special finish is to be provided, finishing uneven and oneycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Soil, Waste, Vent & Rain Water Pipes Swerage System Strom Water & Drainage system

Quantity723

Rate-

Amount -

Providing and fixing on walls/ ceiling/ floors, 32 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.89 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity75

Rate-

Amount -

Providing and fixing on walls/ ceiling/ floors, 50 mm dia heavy grade having embossed as ISI Mark galvanised iron pipes weight of 6.33 Kg/meter with necessary fittings.and remaking good the demolished portion and primer of anti corrossive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Soil, Waste, Vent & Rain Water Pipes Water supply & Drainage pumps

Quantity91

Rate-

Amount -

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes,inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment)

Quantity285

Rate-

Amount -

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes,inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment)

Quantity75

Rate-

Amount -

Providing and laying in trenches 25 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 2.49 kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity280

Rate-

Amount -

Providing and laying in trenches 32 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 3.20 kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity860

Rate-

Amount -

Providing and laying in trenches 40 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 3.68 kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity680

Rate-

Amount -

Providing and laying in trenches 50 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 5.17 kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity190

Rate-

Amount -

Providing and laying in trenches 80 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 8.57 kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity80

Rate-

Amount -

Providing and laying in trenches 100 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 12.43kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity275

Rate-

Amount -

Providing and fixing 100mm diameter water meter with nonreturn valve including strainer, sockets/ union nut and including water meter box making locking arrangements and lock. [Without chamber].

Quantity1

Rate-

Amount -

Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Quantity22

Rate-

Amount -

Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Water supply system Landscape, irrigation system

Quantity54

Rate-

Amount -

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Quantity9

Rate-

Amount -

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Quantity9

Rate-

Amount -

Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Quantity4

Rate-

Amount -

Providing and constructing Brick Masonry inspection trap Chamber 90 cm x 45 cm including 1:4:8 C.C foundation, 1:2:4 C.C. channels / half round glazed stoneware pipe channel, salt glazed stone -ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram. etc complete

Quantity5

Rate-

Amount -

Providing and constructing Brick Masonry Inspection Chamber 60 cm x 45 cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and air tight 75 mm thick R.C.C. cover medium duty 100 Kilogram etc. complete.

Quantity59

Rate-

Amount -

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity385

Rate-

Amount -

Providing and fixing on walls/ceiling/floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity130

Rate-

Amount -

Providing and fixing on walls/ceiling/floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity65

Rate-

Amount -

Providing and laying in trenches 25 mm dia. CPVC pipe including necessary excavation, fittings. Refilling trenches etc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity210

Rate-

Amount -

Providing and laying in trenches 32 mm dia. CPVC pipe including necessary excavation, fittings. Refilling trenches etc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity235

Rate-

Amount -

Providing and laying in trenches 40 mm dia. CPVC pipe including necessary excavation, fittings. Refilling trenches etc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity430

Rate-

Amount -

Supplying & Installing cast iron double flange butterfly valve of size 75/80 mm dia. as per specification No. FF-VL/BFV

Quantity6

Rate-

Amount -

Supplying & Installing cast iron double flange butterfly valve of size 100 mm dia. as per specification No. FF-VL/BFV

Quantity11

Rate-

Amount -

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical means

Quantity5925

Rate-

Amount -

Quantity3050

Rate-

Amount -

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.

Quantity1507.5

Rate-

Amount -

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Quantity32

Rate-

Amount -

Providing, laying and fixing, jointing Eco-drain 160mm SN 4 Nu-Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete.

Quantity30

Rate-

Amount -

Providing, laying and fixing, jointing Eco-drain 200 mm SN 4 Nu -Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees tees, coupler etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete.

Quantity385

Rate-

Amount -

Providing, Laying and fixing, jointing Eco Drain 250 mm SN -04 Nu-Drain Upvc pipe or of equivalent make, manufacture as per EN13476 or equivalent as per I.S.15328 & 16098 with fittings such a bends, tees, coupler, etc. jointing with rubber lubricant, including necessary excavation, trench refilling with selective excavated material etc. complete.

Quantity685

Rate-

Amount -

Providing, Laying and fixing, jointing Eco Drain 315 mm SN -04 Nu -Drain Upvc pipe or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S. 15328 & 16098 with fittings such a bends, tees, coupler, etc. jointing with rubber lubricant, including necessary excavation, trench refilling with selective excavated material etc. complete.

Quantity60

Rate-

Amount -

Providing and constructing on sewer, B.B. masonry circular manhole concentric cone 1.2 M dia. at bottom and 0.5 M dia. at top and upto a depth of 2.00 M with 23 cm brick work in CM 1:4 proportion excluding excavation including foundation concrete 250 mm thick and haunches and channels in c.c.1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighing 5.5 kg., 1:2:4 coping and providing and fixing approved make and quality S.F.R.C. frame and cover of 56 cm.dia. etc. complete as directed by Engineer-incharge.

Quantity75

Rate-

Amount -

Rebate for every decrease in depth of 50 cm (Rebate to be taken in proportionate to decerease in depth)

Quantity100

Rate-

Amount -

Providing and constructing on sewer, B.B. masonry circular manhole concentric cone 1.5 M dia. at bottom and 0.5 M dia. at top and upto a depth of 5.00 M with 23 cm brick work up to depth of 2 M from top and 35 cm thick brick work for balance depth in CM 1:4 proportion with 20 mm thick smooth plaster on both side in cm 1:2 proportion excluding excavation including foundation concrete 250 mm thick and haunches and channels in c.c.1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighting 5.5 kg., 1:2:4 coping and providing and fixing approved make and quality S.F.R.C. frame and cover of 56 cm.dia. etc. complete as directed by Engineer-in-charge.

Quantity23

Rate-

Amount -

Rebate for every decrease in depth of 50 cm (Rebate to be taken in proportionate to decerease in depth)

Quantity48

Rate-

Amount -

Providing and laying cement concrete pipe of IS 458 : 2003 NP-2 class of 450 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Quantity145

Rate-

Amount -

Providing and laying cement concrete pipe of IS 458 : 2003 NP-2 class of 600 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Quantity200

Rate-

Amount -

Providing and laying concrete pipes of I.S. NP. Class of 225 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Quantity1480

Rate-

Amount -

Providing and laying concrete pipes of I.S. NP. Class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Quantity155

Rate-

Amount -

Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST levied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988. Note : One collar should be supplied with each full length plain ended RCC pipe, cost including in rates below. One rubber ring should be supplied with each full length of socketed pipe, cost included in rates below. Class ‘NP-II’ ( For 2.50 m. length ) 500 mm with Collar Joints

Quantity70

Rate-

Amount -

Quantity125

Rate-

Amount -

Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc. complete as directed by Engineer-in-charge (For all class of pipes.) as per IS-783-1985. 500 mm with Collar Joints

Quantity70

Rate-

Amount -

Quantity125

Rate-

Amount -

Hydraulic testing of RCC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 500 mm with Collar Joints

Quantity70

Rate-

Amount -

Quantity125

Rate-

Amount -

Providing and fixing on walls/ ceiling/ floors, 80 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 10.15 Kg/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity10

Rate-

Amount -

Providing and fixing on walls/ ceiling/ floors, 100 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 14.74 Kg/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity10

Rate-

Amount -

Providing and fixing screw down for 65 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Quantity18

Rate-

Amount -

Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004, including painting of pipes with two coats of synthetic enamel paint over a coat of steel primer. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below. Heavy 65 mm. ( 8.02 kg./m )

Quantity40

Rate-

Amount -

Quantity10

Rate-

Amount -

Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge. Heavy 65 mm. ( 8.02 kg./m )

Quantity40

Rate-

Amount -

Quantity10

Rate-

Amount -

Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion. Heavy 65 mm. ( 8.02 kg./m )

Quantity40

Rate-

Amount -

Quantity10

Rate-

Amount -

Supplying & Installing cast iron double flange butterfly valve of size 150 mm dia. as per specification No. FF-VL/BFV

Quantity1

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 2 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Quantity40

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Quantity40

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Quantity30

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 3 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Quantity20

Rate-

Amount -

Supplying & erecting Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C. supply of 2 HP with discharge 2.2/4.1 Liters per second (LPS) for head of 8/26 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification No. WP-CGP

Quantity2

Rate-

Amount -

Providing and laying in trenches 50 mm dia. CPVC pipe including necessary excavation, fittings. Refilling trenches etc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Quantity80

Rate-

Amount -

Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, nspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. PE-100 10 Kg/Sq. cm : 63 mm

Quantity50

Rate-

Amount -

Quantity1000

Rate-

Amount -

Quantity115

Rate-

Amount -

Quantity50

Rate-

Amount -

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by Engineer in charge as per IS-7634 Part II. For all classes. 63 mm

Quantity50

Rate-

Amount -

Quantity1000

Rate-

Amount -

Quantity115

Rate-

Amount -

Quantity50

Rate-

Amount -

Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. 63 mm

Quantity50

Rate-

Amount -

Quantity1000

Rate-

Amount -

Quantity115

Rate-

Amount -

Quantity50

Rate-

Amount -

RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with net lonmesh including 300mm thick side filling around outside of RCC rings(annular space)with 40mm size boulders including filling of recharge pit upto 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washedriver fine aggregate(natural sand/crushed sand VSI grade finely washed etc.) including net lonmesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.)media layer including covering with RCC slab,manhole frame & cover,PVC rungs,PVC end-caps,fittings etc. including arrangement for inlet & outlet pipe excavation & back filling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding,transportation, taxes,including all leads,lifts at all levels.All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge

Quantity32

Rate-

Amount -

Boring/drilling borewell of 300mm dia for casing/strainer pipe,by suitable method prescribed in IS:2800 (partI),including collecting samples from different strata,preparing and submitting strata chart / bore log,including hire & running charges of all equipments,tools,plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level.

Quantity1280

Rate-

Amount -

Supplying ,assembling, lowering and fixing in vertical position in borewell, unplasticized PVC medium well-casing pipe of 150mm dia,conforming to IS:12818, including required hire and labour charges, fittings & accessories etc.all complete,for all depths, as per the direction of Engineer in charge.

Quantity320

Rate-

Amount -

Supplying, assembling, lowering and fixing invertical position in borewell,unplasticized PVC medium well screen pipes with ribs of 100mm dia, conforming to IS:12818,including required hire and labour charges,fittings & accessories etc. all complete, for all depths,as per the direction of Engineer in charge.

Quantity960

Rate-

Amount -

Supplying, filling ,spreading & leveling stone boulders of size range 5cm to 20cm in rechargepit, in there quired thickness, for all leads & lifts, all complete as per the direction of Engineer-in-charge.

Quantity16

Rate-

Amount -

Supplying, filling, spreading & leveling gravels of size range 5mm to 10mm, in the rechargepit, over the existing layer of boulders, in required thickness,for all lads & lifts, all complete as per direction of Engineer-incharge.

Quantity16

Rate-

Amount -

Supplying, filling, spreading & leveling coarse fine aggregate(crushed sand VSI grade finely washed etc.) of size range 1.5mm to 2mm in recharge pit, in required thicknessover gravel layer, for all leads & lifts, all complete as per direction of Engineer in charge.

Quantity16

Rate-

Amount -

Gravel packing in tubewell construction in accordance with IS:4097,including providing gravel:fine/medium/coarse,in required grading & sizes as per the actual requirement, all complete as per direction of Engineer in charge.

Quantity68

Rate-

Amount -

Providing and fixing cast brass twin coat hooks fixed to PVC rawl plug with SS screws , including all fittings complete in all respect.

Quantity55

Rate-

Amount -

Providing and fixing Perfume Dispenser, including all fittings complete in all respect.

Quantity26

Rate-

Amount -

Providing and fixing fully automatic soap dispenser, including all fittings complete in all respect.

Quantity49

Rate-

Amount -

Providing and fixing C.P. brass 15 mm nominal bore bib cock Jaquar cat. FLR-5047N or Equivalent model of Kohlar/Roca.

Quantity40

Rate-

Amount -

Providing and fixing fully automatic Hand dryer Euronics Model-EH 26 NW or Equivalent model of Kohlar/Jaquar ,including all fittings complete in all respect.

Quantity8

Rate-

Amount -

Providing and fixing Thermoflex or Kaiflex Make thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge aluminium sheet with riveted screw joints all required accessories complete as per specification. 13 mm thick For 20 mm dia Pipe

Quantity30

Rate-

Amount -

Quantity245

Rate-

Amount -

Quantity140

Rate-

Amount -

Quantity285

Rate-

Amount -

Supplying breaker machine with operator and fuel including any repair occur to machine while working should be responsibility of the supplier, all the saftety measures and insurance of machine and operator will be the responsibility of the supplier. Rate will be on per day basis and working will be of 8 hours including lunch and tea break of one hour.

Quantity20

Rate-

Amount -

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :For pipes 250 to 300 mm diameter

Quantity1

Rate-

Amount -

Constructing bricks masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity175

Rate-

Amount -

Extra for depth beyond 60 cm of brick masonry chamber For 500x450 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity17

Rate-

Amount -

Providing & fixing of Pop-up ROTOR sprinkler having variable adjustable arc (50 to 360 degree) nozzle capable of covering 4.9 - 14 mtr at 2.5 kg/cm2 with discharge rate of 0.02 to 0.891 LPS. the rotor body, stem, nozzle, and screen shall be constructed of heavy duty , ultraviolet resistan plastic with small exposed cover along with SJ712, 3/4" Pop up connecting four elbow swing joint assembly. The fittings shall be made of UV resistant thermo plastic and service saddle of varying material Polypropylene.

Quantity42

Rate-

Amount -

Providing & fixing of Rotatory Pop up having colour coded Rotator nozzle with multiple stream water spray capable of covering 2.5m- 10.7m at 2.5 kg/cm2 with Matched Precipitation Rate, Discharge rate of 0.08 to 0.40 LPS. The Spray Head body shall be constructed of heavy-duty, ultraviolet resistant plastic and stainless steel spring with multifunctional wiper seal with small exposed cover along with SJ-512, 1/2" Pop up four elbow swing joint assembly. The fittings shall be made of UV resistant thermo plastic and service saddle of varying size of material Polypropylene.

Quantity20

Rate-

Amount -

Providing and fixing Drip Line 16 mm LLDPE pipe with Required Drippers at Spacing 500 mm C?C and Accessories such as joiners, Tees, Elbows, End cap, clamps etc. complete

Quantity600

Rate-

Amount -

Providing and fixing of Automate/Equ. PVC Ball Valve, Security Pivot to Maintain Lever in space, double Water tight joint, direct injection stem non mechanical, with a base which permits maximum penetration in to the valve. 20 mm size

Quantity8

Rate-

Amount -

Quantity10

Rate-

Amount -

Quantity6

Rate-

Amount -

Providing and fixing of double acting 1" air release valve shall be capable of both releasing and admitting air from and in to the line. The working pressure shall be 5 kg/cm2, including service saddle and riser assembly.

Quantity1

Rate-

Amount -

Providing and fixing of 12" rectangular valve box with green lid and corrugated structure with unique shovel access slot and bolt hole knockout.

Quantity16

Rate-

Amount -

Providing and fixing of Rain Bird/Hunter/Automat make 6" Round box with openable greenlid and corrugated structure with unique shovel access slot and bolt hole knockout.

Quantity8

Rate-

Amount -

Providing and fixing of Brass Quick Coupling Valve 3/4" made up of solid brass with locking cover corrosion resistant and stainless steel spring, including service saddle and riser assembly including brass key threads in to top of QCV to provide water access and brass swivel elbow.

Quantity15

Rate-

Amount -

Providing and fixing of Disc Filter with capacity matching pump design flow having an suitable inlet connections, to create a helical effect in the incoming water, spinning particulate in suspension away from the flitting element and so minimizing cleaning frequency, 3/4" outlet for flushing at bottom of filter & maximum working pressure of 10 Bars, with pressure gauge.

Quantity1

Rate-

Amount -

Providing and fixing of mono bock or open well submersible pump set 2/3 HP of having discharge 3 LPS @ 38 m. head.

Quantity1

Rate-

Amount -

Providing and fixing of control panel suitable for pump set having panel box and fixed along with following accessories - Starter , start/ stop push buttons, ammeter, Voltmeter, indicating lamps, MCB, with cable etc.

Quantity1

Rate-

Amount -

Providing and fixing of Pressure Relief Valve all complete as directed by Engineer-in-charge..

Quantity1

Rate-

Amount -

Providing and fixing 100 mm dia Centrifugally cast (spun) Iron S&S pipe as per IS: 3989 soil, waste and vent pipes of including all fittings suitable for same pipes ie. Plain & door bends, junctions (tee), terminal guards, collars etc as required, GI pipe supports, GI clamps with EPDM rubber of pipes & fittings jointed with lead joints, painting of pipes & fittings with two or more coats of Syntetic enamel paint as directed by Engineer-in-charge.

Quantity420

Rate-

Amount -

Providing and fixing of 100 mm inlet and 100 mm outlet Centrifugally cast (spun) Iron S&S as per IS: 3989 P-trap of self cleansing design of with G.I. inlet fitting with 1 or 2 inlets fabricated from 100 mm dia G.I. pipes and welded G.I. sockets fixed to C.I. trap with lead caulked joint, GI Pipe & GI Fittings including 125x125 mm stainless steel tile grating of Chilly/Camry Make, including cost of cutting and making good the walls and floors.

Quantity75

Rate-

Amount -

Providing and fixing of 100x50 mm GI Reducing elbow Floor Drain of including 125x125 mm stainless steel tile grating of Chilly/Camry Make fix in floor with cement mortar.

Quantity10

Rate-

Amount -

Providing and fixing cast brass clean out plug of with suitable insert keys for opening, male threaded joint with 100 mm dia. GI female threaded socket caulked to CI pipe including cost of Lead or Other Joint. 100 mm dia

Quantity17

Rate-

Amount -

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet & inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams complete.

Quantity34

Rate-

Amount -

Sewage Treatment Plant 100 KLD ( SBR Technology )

Quantity1

Rate-

Amount -

Note : All Civil Works with Structural Walk Ways/ Railings, General Lighting and Ventilation to be Done by Client/Owner. Design, Supplying, Installing, Testing & Commissioning of Sewage Treatment Plant capacity 100 KLD (excluding excavation, back filling & disposal of surplus earth /Civil construction work) for the following duty: Nature of effluent - Domestic Sewage from Toilet use , kitchen waste. Incoming parameters: pH - 6 - 8.5 BOD5 - upto 250-350 Mg/L S. Solids - 250 - 400 Mg/L COD - upto 450-600 Mg/L Oil & Grease - 50-100 Mg / L Final effluent discharge standard after treatment pH - 6.0 - 8 BOD5 - Less than 10 Mg/L S. Solids - Less than 30 Mg/L COD - Less than 80 Mg/L Oil & Grease - Less than 10 Mg/L E Coli – Nil

Quantity-

Rate-

Amount -

Note:- Contractor shall ensure submission of detailed GA drawings (Plan & Section), P&I diagram, schematic diagram for the above said component and additional component if so required for the complete working of the STP. a)Supply, installation, testing & commissioning set of 2 Nos Manual Stainless Steel Bar Screen with suitable lifting arrangement for required sizes (size 800 mm wide x 900 mm high approx. b) Supply, installation, testing & commissioning one lot of electronic type level indicator and controller for automatic operation of the system with high/low level alarm complete with auxiliary NO/NC contacts. c) Supply, installation, testing & commissioning of non clog open impeller type pumps, having CI casing & CI impeller complete with all accessories, motor of required capacity. Delivery header with isolation valve and NRV, liftng arrangement, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of sump automatically. Pump shall have following duty for reference and vendor to confirm on design base. c1.) Submersible Sewage Transfer Pumps 2 Nos. ( 1 Working + 1 Standby ) (Solid handling cap. 35 mm) Flow rate (each) = 25 M3 / hr Head = 10 Mtr c2.)Sludge Transfer Pumps 2 Nos (1 Working + 1 Standby) (Solid handling cap. 8.5 mm) Flow rate (each) = 5 M3 / hr Head = 12 Mtr d) Supply, installation, testing & commissioning two Nos. of Twin type rotary air blowers (1 W + 1 S) Capable of delivering 200 cum/hr (each) of free air at 0.6 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles a/c supply.

Quantity-

Rate-

Amount -

e) Supply, installation, testing & commissioning One Lot of Air piping shall comprise of pipes droppers/ laterals with M S (epoxy coated) Header complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc cutting chases & making good in Plant Room. All submerged piping will be SS-304 f) Supply, installation, testing & commissioning of Non clog type air dispersion system capable of handling 3-5 cfm of air with oxygen transfer efficiency of 3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired Fine /coarse aeration bubble diffusers as required. For sludge holding tank - 1 No. & For SBR reactor tank- 1 No. g) Supply, installation, testing & commissioning of Air dispersion system shall be provided for Sludge holding Tank and SBR reactor Tanks SS 304 : Submerged air piping MS Epoxy : Air piping, Filters & other Eqp. PVC piping ASTM SCH 40 :Pumped effluent & tank overflow pipe line h) Supplying, installing, testing & commissioning of 150 M3/Hr CI Submersible Jet Areator in Equalization Tank 1 No. i) Supply, installation, testing & commissioning One No. of motorized Moving Decanter to suit SBR tank with MOC SS-304 with scum guard and connected with ultrasonic level transmitter & ultrasonic level element for automatic control etc. complete as required. j) Providing and fixing One No. of wall mounted Oxylite (Mixed Oxidant) Generation System, based on ECA Technology, producing non toxic mixed Oxidant Solution at 1000 ppm of Oxidant Concentration . The solution should be at a pH -7 (Neutral ) suitable for 24x7 operations should produce 720 L per day .The system should have a single cell & supplied complete with appropriate dosing pumps , valves, piping, fittings, chemical dosing tank etc.

Quantity-

Rate-

Amount -

k) Supply, installation, testing & commissioning of vertical inline multistage pumping set with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete. Vendor to submit performance curves and technical catalogue of the proposed model for review and information. k1) One Set of Filter Feed Pumps Capacity : 10 M3 / Hr Head : 25 M Set of Two Pumps (1 Working + 1 Standby) l) Supplying, installing, testing and commissioning of MSEP vessel filter with all necessary accessories. Filter shall be suitable for minimum working pressure of 5 kg / cm2 and shall include media, standard fittings like pressure gauges, sampling cock, rinse drain, vacuum breaker etc. The MS sheet thickness for shell shall be min. 8 mm and for dishes shall 10 mm. The internal surfaces of tank shall be treated with epoxy cooing and external surface with primer and anticorrosive enamel paint (Min. 2 coats). with frontal piping shall be 100 mm dia MSEP along with valves PN 1.0, test cock, air inlet for back washing and pressure gauges at inlet and outlet. l1) One No. of Multi grade Pressure Sand Filter Flow Rate = 10 M3 / Hr Filtration velocity : 15 Cum/Hr/Sqm Filter HOS : 1800 MM Filter Diameter : 1000 MM. l2) One No. of Activated Carbon Filter Flow Rate = 10 M3 / Hr Filtration velocity : 15 Cum/Hr/Sqm Filter HOS : 1800 MM Filter Diameter : 1000 MM.

Quantity-

Rate-

Amount -

m) Supply, installation, testing and commissioning One Set of Filter Press of plate as required (size 24"x 24" x 23 nos plate for reference) with screw feed pumps of 2 m3/hr with adequate head (1Working+1Standby) with interconnecting piping and poly dosing system all complete. n) Supply, installation testing and commissioning One Set of Magnetic flow meter suitable for 100 KLD Plant with preamplifier and microprocessor including necessary cabling, conduit, etc complete suitable for raw sewage application. o) Supply, installation, testing & commissioning One No. of the PLC based control panel with interlocking arrangement with supply pumps, suction pumps, modulating or shut-off valves including necessary wiring, magnetic switches & sensors complete to make the system functional with following interlocking p) Construction: Compartmentalized Type Skid Mounted, MCC Cum PLC Control panel will be free standing; vertical, fabricated from CRCA steel sheet 14/16 G conforming to degree of protection IP-52 or better. Cable entry will be from bottom. Colour shade - RAL 7032 System Voltage: 380 to 410 Volts & 50HZ ( 415 V ±10% , AC, 50 HZ ±5% for India ). Surge protection to be provided at every applicable point. PLC: The Programmable Logic Controller [PLC] shall consist of a PLC hardware, with 16k (min) program memory shall be protected by a backup battery with further memory protection from an EEPROM. HMI: 5.5 Inch Colour Touch screen HMI, will be mounted on A Man-Machine Interface Terminal (MMI) shall be mounted on the front of the main control panel for control of the activated sludge plant. It will provide a display of the process parameters and equipment status. The display will have an associated keypad. The system will allow operator changes to set points and control of equipment. The terminal shall include an alarm annunciation with a dedicated alarm page and allow acknowledgment of alarms.

Quantity-

Rate-

Amount -

q) Design, fabrication, assembling, wiring, supply, installation, testing and commissioning One No. of motor control centre shall be fabricated with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthling terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Incoming 300 amps TPN MCCB with the following accessories: a. 0-500 volts 96 x 96 mm square electronic voltmeter with selector switch shall be protected by 2 amps TP MCB. 1 Set b. 0-100 amps 96 x 96 mm square electronic ammeter with selector switch and 100./5 amps 10 VA CL:1 CTs. 1 Set c. Phase indicating lamps shall be protected by 2 amp SP MCB 3 Sets Bus Bar 200 amps TPN (15 KA) copper bus bar with heat shrinkable insulation sleeves. Required Nos of required capacity TPN MCB for direct on line starter/star delta starters and out going feeders to all the pumps/blowers etc. (including standbys). Each compartment shall contain auto / manual selector switch and indicating lamp with MCB’s for ‘ON/OFF/TRIP’ status of motor Spare MCB’s of following capacities: 32 amps TPN MCB’s 3 Nos. All MCCBs / MCBs shall be of 15 KA breaking capacity and suitable for motor duty application. All motor starters shall be provided with Automatic level controller DOL starters shall be used for mototrs below 10HP and Star-Delta Starters for other motors Provision shall be made for providing potential free contacts to all pumps starters

Quantity-

Rate-

Amount -

r) Supplying & Fixing One Lot of Cables , Connector, Cable Trays, to make Electrical Installation Complete. Necessary cable alleys, internal / cabling, wiring, cabling from MCC to various pumps / equipment and interlocking, earthling and earthling pits for all equipment Ultrafiltration System - 5 KL/Hr - For Generating 60 KL water for Flushing s) Providing & Fixing One Set of UF Module (Hollow Fibre -outside in type porocity 0.1 to 0.01 micron) including micron cartridge filter in PP housing, Pneumatic Valve, PLC Electrical Panel, flow meter, compressor and all other accessories making the system complete Flow rate : 6 cum/hr Output Inlet TSS :- 10-30 mg/lt Filtration Flux :- 45 lt/m2/hr Membrane Area - 64 M2 as per approved makes Membrane MOC - PVDF / PES Membrane Type :- Pressure Feed Membrane 0.01-0.04 Micron rating type, Out to in process No. of UF Membrane - 2 Number Make UF Membrane - Norit / Pureflow / Koch / Dow / GE t) Providing & Fixing One Set of UF Feed Pump Capacity 6 M3/hr each (1 W + 1 SB) Head 20-25 Mts RPM 2900 Make - Grundfos / Wilo / Frenklin u) Supply, installation, testing & commissioning One of UF pre fine filtration. It can be micron filter or Bag filter as per vendor design. The MOC of housing of filter shall be PP

Quantity-

Rate-

Amount -

v) Supplying, installing, testing, commissioning One Set of centrifugal Vertical UF Backwash pumps with Complete SS - 304 with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, strainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply . Capacity : - 12 M³/h Head : - 18- 20 m No. of Pumps: 2 Nos ( 1 Working + 1 Standby) Make - Grundfos / Wilo / Frenklin w) Supplying, Installation, testing and commissioning One Set of chlorine dosing system compromising of Sintex Tank with inlet/ outlet connection, piping and valves alongwith metering pump of 6 LPH for dosing. Make - Asia LMI or equivalent make x) Supply, Installation, testing and commissioning One Set of CEB / CIP dosing station including dosing tank, pumps complete in all respect as per UF membrane specification requirement y) Supply installation commissioning One Set of PLC control panel with all automation required like Pneumatic valves, piping in uPVC PLC and other required accessories. Make PLC - Delta, Pneumatic Valve / Solenoid Valves, uPVC Pipe - Supreme/ Finolex, Compressor – Jeet z) Providing & Fixing One Set of MS epoxy coated skid for the complete plant. aa) Supply, installation & commissioning One Set of HDPE backwash tank of 500 Litre capacity including required level controller inlet, outlet, overflow and drain connection.

Quantity-

Rate-

Amount -

Fire Fighting System

Quantity-

Rate-

Amount -

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete as per specification no. FF-PP

Quantity3164

Rate-

Amount -

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete as per specification no. FF-PP

Quantity487

Rate-

Amount -

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Quantity1022

Rate-

Amount -

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP

Quantity390

Rate-

Amount -

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP

Quantity1027

Rate-

Amount -

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete as per specification no. FF-PP

Quantity20

Rate-

Amount -

Providing coating of bitumen paint & 4mm thick wrapping for underground 100 mm ring main of fire fighting system.

Quantity280

Rate-

Amount -

Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.

Quantity515

Rate-

Amount -

Supplying and erecting 200 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS

Quantity1

Rate-

Amount -

Supplying & erecting cast iron double flange butterfly valve of size 75/80 mm dia. complete as per specification no. FF-VL/BFV

Quantity30

Rate-

Amount -

Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV

Quantity6

Rate-

Amount -

Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per specification no. FF-VL/BFV

Quantity17

Rate-

Amount -

Supplying & erecting cast iron double flange butterfly valve of size 200 mm dia. complete as per specification no. FF-VL/BFV

Quantity2

Rate-

Amount -

Supplying and erecting cast iron double flange NRV of size 75/80 mm dia complete as per specification no. FF-VL/NRV

Quantity1

Rate-

Amount -

Supplying and erecting cast iron double flange NRV of size 100 mm dia complete as per specification no. FF-VL/NRV

Quantity3

Rate-

Amount -

Supplying and erecting cast iron double flange NRV of size 150 mm dia complete as per specification no. FF-VL/NRV

Quantity2

Rate-

Amount -

Supplying and erecting cast iron double flange NRV of size 200 mm dia complete as per specification no. FF-VL/NRV

Quantity1

Rate-

Amount -

Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Quantity29

Rate-

Amount -

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification no. FF-FFA/HV

Quantity16

Rate-

Amount -

Supplying fire fighting controlled percolation (C.P.) Hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/CPH

Quantity26

Rate-

Amount -

Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Quantity32

Rate-

Amount -

Supplying & erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ

Quantity29

Rate-

Amount -

Supplying and erecting fire brigade header of 150 mm dia, for supplying water in fire tank complete as per specification no. FF-FA/FBC

Quantity1

Rate-

Amount -

Supplying and erecting fire brigade header (Siamese connection) of 150 mm dia for supplying water to wet riser system complete as per specification no. FF-FFA/SMC

Quantity1

Rate-

Amount -

Supplying and installing air vessel of 300 mm dia 1.5m in height M.S. tank installed inside pump house / on terrace complete as per specification no. FF-FFA/ACT

Quantity1

Rate-

Amount -

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Quantity4

Rate-

Amount -

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Quantity28

Rate-

Amount -

Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Quantity2

Rate-

Amount -

Supplying and erecting one no. brass orifice plate having 6 mm. thickness, 140 mm outer dia and required/proper diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Quantity39

Rate-

Amount -

Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve (size 400 x 400 x 400mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

Quantity13

Rate-

Amount -

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

Quantity2

Rate-

Amount -

Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

Quantity16

Rate-

Amount -

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Quantity420

Rate-

Amount -

Supplying, erecting, testing and commissioning of 15 mm (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR

Quantity1431

Rate-

Amount -

Supplying, erecting, testing and commissioning vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 100 mm dia having following features 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4) Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes

Quantity10

Rate-

Amount -

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.

Quantity40

Rate-

Amount -

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.

Quantity10

Rate-

Amount -

Supplying and erecting D.C.P. type fire extinguisher 9 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete.

Quantity20

Rate-

Amount -

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Quantity20

Rate-

Amount -

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Quantity20

Rate-

Amount -

Supplying, installing, testing and commissioning with perfect aligning, proper levelling of fire service main multi stage pump, of 2800 LPM at 76 m head centrifugal type, 75 HP (55 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/MSC

Quantity2

Rate-

Amount -

Supplying, installing, testing and commissioning with perfect aligning, proper levelling of jockey pump of 240 LPM at 56 m head, 15 HP (11 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/JP

Quantity1

Rate-

Amount -

Quantity715

Rate-

Amount -

Providing and fixing 15 mm dia forged brass window nozzle type sprinkler head (K-23, with an angle of 180 Degree) with a flow rate of 40 LPM at pressure of 3.0 Kg/cm2 . Make-Tyco / Viking / HD

Quantity73

Rate-

Amount -

Providing and fixing installation valve with turbine type automatic alarm to be connected with control valve drain and test valve as per manufacturer's design. Make-HD / Tyco/Viking

Quantity1

Rate-

Amount -

Providing and fixing 25 mm dia inspecting & testing assembly with built in bye pass arrangement and connection to drain line. Make-Giocomini

Quantity10

Rate-

Amount -

Providing and fixing of Deluge valve with automatic alarm system suitable for 150 mm dia pipe including with all necessary accessories to be connected with control valve drain and test valve as per manufacturer's design. Make-Victolic / Tyco/Viking

Quantity2

Rate-

Amount -

Supply, installation, testing and commissioning of Diesel Engine driven fire pump suitable for automatic operation comprising of the following and conforming to BS 649/IS 10002 all amended up-to-date. Horizontal multi stage, split casing centrifugal pump, suitable for diesel engine operation . The installation shall be complete with flexible coupling and coupling guard as required. Fire pump shall have CI casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and SS (304) shaft with mechanical seal, pump shall ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant / sprinkler. The installation shall be complete with necessary pressure gauge on delivery side. Heat exchanger cooled (secondary cooling) diesel engine of speed 1500 RPM suitable for the above pump with automatic starting mechanism and other accessories including fuel tank (fabricated from 6mm MS sheet, painted with two coats of synthetic enamel paint over a coat of primer) of capacity adequate to sustain pump operation for 8 hours continuous working. The tank shall be fitted with Magnetic oil level indicator, MH with cover, drain valve, air vent including structural supports (painted with approved shade), 2 Nos. x 12 volt battery (alternator of engine and panel is suitable for 12 volt current rating) with stand heat exchanger with necessary piping connections & fittings complete as required Common base frame for (a) and (b) from M.S. Channel for required size. Suitable RCC / cement concrete foundation with plaster and MS angle epoxy coated edging (design and drawing to be provided by the Contractor. Complete with anti-vibration arrangement of cushy foot mountings. Make- Kirloskar/Matterplatt/KSB Capacity- 2850 LPM at Head- 76 M.

Quantity1

Rate-

Amount -

Design, manufacture, supplying, fixing in position, testing and commissioning of the following front operated cubicle type, front access 2mm thick mild steel sheet, free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system and suitable for a fault level of 25 MVA symmetrical at 415 volts. All switchboards shall have provision for entry of cables from the top or bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used. Padlocking facility shall be provided on all outgoing feeders doors and switch handles shall be lockable in OFF position. MCC for Fire Fighting Pumps at Main Pump Room Incoming One incoming main TPN MCCB of 400 amp, 25 KA required rating. One-Digital voltmeter with phase selection push button = 1Nos.3 Phase indicating lamps, instrument fuses and switches.1 No. Digital Ammeter Bus Bar & Outgoing 630 Amp TPN tinned copper Bus Bar. with heat shrinkable insulation sleeve. Two 200 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA One 63 Amp.TP +NL M.C.C.B. with rotary handle of breaking capacity 25KA One Fully Automatic Star-Delta starters suitable for 75-100 HP Pump Motor with over load relay timer push buttons and Auto/Manual selector switch and single phase preventer relay. One Fully Automatic Star-Delta starters suitable for Jockey Pump Motor 15 HP with over load relay, timer push buttons and Auto/Manual selector switch and single phase preventer relay. Two panel type Digital Amp. meters one for each motor with ASS. CTS etc.

Quantity1

Rate-

Amount -

Two sets of On/Off - neon indicating lamp. One 200 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA Spare Diesel Engine Control) i) Automatic selector switch and 3 attempts starting devices, electronic timer, relays, auxiliary switches, tripping relays, contactors, push buttons for manual start/stop etc., to make the equipment automatic as per the functional requirement. ii) Battery charging unit suitable for 24 V DC with boost & trickle charger, selector switch with suitable rating transformer, rectifier, RC filter network, fuses on AC or DC protection 0-30 A DC digital Ammeter. Charger should be cut off when the engine is started & battery shall be charged from battery charging alternator provided in the engine. iii) Suitable type & rating standard relays, contactors & other accessories for automatic operation the diesel engine. iv) Indication LED's for high/low lub oil pressure, water temperature engine on indicator with suitable alarms & acknowledge button etc. System Controller i) Designing, supply, install, testing & commissioning of system controller to control operation of main electrification pump, diesel engine pump, main sprinkler fire pump, pressurisation pump, terrace pump in sequence as per specifications. The system controller should be compatible with BMS. All interconnecting power & control wires/cables suitable size within the panel. MCC as described above

Quantity-

Rate-

Amount -

ELECTRICAL WORK :-

Quantity-

Rate-

Amount -

Supplying & erecting ISI mark Rigid Steel conduit 16 SWG 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WGMA/ CC, para no. 1.2.3

Quantity4500

Rate-

Amount -

Supplying & laying ISI mark Rigid Steel conduit 16 SWG - 20 mm. dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG-MA/CC, para no. 1.2.3

Quantity2800

Rate-

Amount -

Supplying & erecting ISI mark Rigid Steel conduit 16 SWG 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WGMA/ CC, para no. 1.2.3

Quantity550

Rate-

Amount -

Supplying & laying ISI mark Rigid Steel conduit 16 SWG - 25 mm. dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG-MA/CC, para no. 1.2.3

Quantity400

Rate-

Amount -

Supplying & erecting ISI mark Rigid Steel conduit 16 SWG 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WGMA/ CC, para no. 1.2.3

Quantity50

Rate-

Amount -

Supplying & laying ISI mark Rigid Steel conduit 16 SWG - 32 mm. dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG-MA/CC, para no. 1.2.3

Quantity100

Rate-

Amount -

Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 20 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WGMA/ CC, para no. 1.2.1

Quantity100

Rate-

Amount -

Supplying & laying Rigid PVC conduit 20 mm Dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC, para no. 1.2.1

Quantity100

Rate-

Amount -

Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WGMA/ CC, para no. 1.2.1

Quantity2800

Rate-

Amount -

Supplying & laying Rigid PVC conduit 25 mm Dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC, para no. 1.2.1

Quantity2000

Rate-

Amount -

Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 32 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WGMA/ CC, para no. 1.2.1

Quantity50

Rate-

Amount -

Supplying & laying Rigid PVC conduit 16 SWG 32 mm Dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC, para no. 1.2.1

Quantity50

Rate-

Amount -

Supplying and erecting rigid PVC conduit 20 mm dia. with PVC accessories on wall / ceiling as per specification No: WGMA/ CON, para no. 1.1.1

Quantity100

Rate-

Amount -

Supplying and erecting rigid PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WGMA/ CON, para no. 1.1.1

Quantity100

Rate-

Amount -

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 20 mm with accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.2

Quantity100

Rate-

Amount -

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.2

Quantity50

Rate-

Amount -

Supplying and erecting PVC box trunking of size 50x50 mm. with accessories on wall/ceiling as per specification No: WGMA/ BOX, para no. 1.1.2

Quantity50

Rate-

Amount -

Supplying and erecting PVC box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification No: WGMA/ BOX para no. 1.1.2

Quantity50

Rate-

Amount -

Supplying & erecting GI flexible Conduit 25 mm dia. conforming to I.S. and approved make with required number of couplings, bushes, check nuts etc. complete

Quantity50

Rate-

Amount -

Supplying & erecting mains with 2x1.5 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No:WG-MA/BW

Quantity10000

Rate-

Amount -

Supplying & erecting mains with 2x2.5 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Quantity1800

Rate-

Amount -

Supplying & erecting mains with 2x4 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Quantity1000

Rate-

Amount -

Supplying & erecting mains with 2x6 sq.mm F.R L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Quantity600

Rate-

Amount -

Supplying & erecting mains with 2x10 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No:WG-MA/BW

Quantity1000

Rate-

Amount -

Supplying & erecting mains with 3x6 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Quantity500

Rate-

Amount -

Supplying & erecting mains with 3x10 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Quantity100

Rate-

Amount -

Supplying & erecting mains with 4x16 sq.mm F.R L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Quantity200

Rate-

Amount -

Supplying & erecting mains with 4x25 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Quantity100

Rate-

Amount -

Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Quantity10

Rate-

Amount -

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Quantity10

Rate-

Amount -

Supplying and erecting modular type bell-push 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Quantity10

Rate-

Amount -

Supplying and erecting modular type Two way switch 6A / 10A (2 Module) ISI mark, approved make, duly erected on provided plate and box with wiring connections complete.

Quantity5

Rate-

Amount -

Supplying and erecting modular type D.P. switch 32A with indicator ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Quantity5

Rate-

Amount -

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Quantity5

Rate-

Amount -

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Quantity10

Rate-

Amount -

Supplying and erecting modular type T.V. socket single outlet ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Quantity2

Rate-

Amount -

Supplying and erecting modular type telephone socket one gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete

Quantity20

Rate-

Amount -

Supplying and erecting modular type computer Jack RJ 45 with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Quantity10

Rate-

Amount -

upplying and erecting modular type buzzer 220 / 250V ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Quantity10

Rate-

Amount -

Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box.

Quantity100

Rate-

Amount -

Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete duly erected in an approved manner.

Quantity62

Rate-

Amount -

Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected in an approved manner.

Quantity42

Rate-

Amount -

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected in an approved manner.

Quantity18

Rate-

Amount -

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected in an approved manner.

Quantity4

Rate-

Amount -

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected in an approved manner.

Quantity4

Rate-

Amount -

Supplying and erecting PVC Surface modular switch box with double mounting & front plate for 8 module complete duly connected.

Quantity2

Rate-

Amount -

Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected in an approved manner.

Quantity2

Rate-

Amount -

Supplying and erecting PVC Surface modular switch box with double mounting plate for 16 / 18 module duly erected in an approved manner.

Quantity2

Rate-

Amount -

Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected.

Quantity2

Rate-

Amount -

Supplying and erecting Modular type 5 pin socket with safety shutters 3 module socket 6A. 240V AC supply, ISI approved and marked make duly erected on provided plate and box with wiring connections complete duly erected in approved manner.

Quantity46

Rate-

Amount -

Supplying and erecting Modular safety power strip with one modular switch16A and three sockets each 13A combination with overload and surge protection unit on double mounting plate complete duly erected in an approved manner.

Quantity51

Rate-

Amount -

Supplying and erecting Modular type USB Charger socket of 1 Module with nominal ouput voltage of 5 VDC + 5/- 5% and Nominal output current of 5 V - 750 mA , ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Quantity20

Rate-

Amount -

Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLS grade copper wire,flush type switch, earthing and required accessaries as per specification No:WG-PW/SW

Quantity98

Rate-

Amount -

Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLS grade copper wire,flush type switch, earthing and required accessaries as per specification No: WG-PW/SW

Quantity5

Rate-

Amount -

Point wiring for light/fan/bell in 20 mm rigid PVC conduit with 1.5 sq.mm (2+1E) FRLS grade Copper wire with flush type switch and required accessaries as per specification No:WG-PW/SW

Quantity5

Rate-

Amount -

Point wiring for independent plug in 20 mm rigid PVC conduit with 1.5 sq.mm (2+1E) FRLS grade copper wire,flush type switch, earthing and required accessaries as per specification No: WG-PW/SW

Quantity5

Rate-

Amount -

Point wiring for light/fan/bell concealed typein min 20 mm PVC conduitwith 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessoriesas per specification No: WG-PW/CW

Quantity20

Rate-

Amount -

Point wiring for light/fan/bell /exhaust fan Hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n caping with 1.5 sq.mm. (2+1E) FR grade copper wires, moduler type switch, earthing and required accessaries as per specification No: WG-PW/CW

Quantity5

Rate-

Amount -

Secondary Point wiring for additional light/ Bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FR/FRLS grade copper wires with required accessaries as per specification No: WG-PW/CW

Quantity352

Rate-

Amount -

Secondary Point wiring for additional light/ Bell point in min 20 mm metal conduit with 1.5 sq.mm (2+1E) FR/FRLS grade copper wire with required accessories as per specification No:WG-PW/SW

Quantity5

Rate-

Amount -

Supplying & erecting telephone cable 2 pair with 0.5 mm dia. laid in provided PVC casing / conduit as per specification No. WG-TW

Quantity1000

Rate-

Amount -

Supplying & erecting telephone cable 5 pair with 0.5 mm dia. laid in provided PVC casing / conduit as per specification No. WG-TW

Quantity500

Rate-

Amount -

Supplying & erecting telephone cable 10 pair with 0.5 mm dia. laid in provided PVC casing / conduit as per specification No. WG-TW

Quantity200

Rate-

Amount -

Supplying & erecting telephone cable 20 pair with 0.5 mm dia. laid in provided PVC casing / conduit as per specification No. WG-TW

Quantity100

Rate-

Amount -

Supplying, erecting & commissioning Main Distribution Frame (MDF) Box 50x50 pairs as per specification No. WG-TW

Quantity2

Rate-

Amount -

Supplying, erecting & commissioning Junction box suitable for 10 pairs as per specification No. WG-TW

Quantity6

Rate-

Amount -

Supplying, erecting & commissioning Junction box suitable for 20 pairs as per specification No. WG-TW

Quantity2

Rate-

Amount -

Supplying, erecting & commissioning Krone module of 10 pairs as per specification No. WG-TW

Quantity6

Rate-

Amount -

Supplying & installing UTP networking Cat-6 cable suitable for LAN / WAN Computer networking as per specification No. WG-COC/NC

Quantity500

Rate-

Amount -

Supplying and fixing 1 meter length, UTP Patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Quantity6000

Rate-

Amount -

Supplying and erecting LSZH armoured multimode Optical Fibre Cable with 6 fibres, with core dia 50/125 μm (OM4) suitable for 1 GBps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench asper specification No. WGCOC/ OFC

Quantity1000

Rate-

Amount -

Supplying and erecting LSZH armoured multimode Optical Fibre Cable with 12 fibres, with core dia 50/125 μm (OM4) suitable for 1 GBps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench asper specification No. WGCOC/ OFC

Quantity1000

Rate-

Amount -

Supplying and plugging FRLS duplex 3 meter length, Fibre Patch cord LC-SC MM(50) OM3 LSZH DUPLEX complete as per specification No. WG-COC/FPC

Quantity10

Rate-

Amount -

Supplying and fixing 2 meter length, UTP Patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Quantity10

Rate-

Amount -

Supplying, fixing, and configuring Managed L2 Power over Ethernet Switch of 20 Ports + 4G Combo Port as per specification in approved manner

Quantity5

Rate-

Amount -

Supplying, installing & testing UTP Connector (RJ-45) as per specification No. WGNAS/ UTPC.

Quantity10

Rate-

Amount -

Supplying, installing, testing & commissioning Digital (Hybrid) type EPABX of 4 x 12(2 Digital+10 Analogue) extension complete.

Quantity1

Rate-

Amount -

Supplying and erecting Electronic Type cordless call bell erected on T.W. Board having portable bell push working on 9V. D.C. and 250 V A.C. supply. (Effective range upto 45 meter) bell on 250

Quantity5

Rate-

Amount -

Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall. As per specification no. FG-IDF/BHF

Quantity65

Rate-

Amount -

Supplying and erecting square / round shaped CRCA /die-cast aluminium powder coated housing LED Panel ( slim edge-lit) light suitable for 13 to 18W with provision for plane front frame with translucent cover fixed to the housing complete.

Quantity429

Rate-

Amount -

Supplying and erecting square / round shaped CRCA /die-cast aluminium powder coated housing LED Panel ( slim edge-lit) light suitable for 19 to 24W with provision for plane front frame with translucent cover fixed to the housing complete.

Quantity5

Rate-

Amount -

Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED Panel light (slim edge-lit) 600X600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete.

Quantity27

Rate-

Amount -

Supplying and erecting LED flexible strip light 5m length upto 25W conforming IP 65 of any colour with driver complete.

Quantity20

Rate-

Amount -

Supplying LED concealed type foot / step light with aluminium body for indoor application suitable for upto 5 W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface

Quantity50

Rate-

Amount -

Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for upto 4W-6W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface.

Quantity50

Rate-

Amount -

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete .

Quantity331

Rate-

Amount -

Supplying and erecting LED flexible strip light 5m length upto 75W conforming IP 65 of any colour with driver complete.

Quantity10

Rate-

Amount -

Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m in length alongwith pole cap of 300 mm length 100 mm dia duly welded as perspecification no. FG-BKT/BPC

Quantity2

Rate-

Amount -

Supplying and erecting gate/garden light fitting with 300mm dia.glass bowl suitable for upto 12W LED Lamp on provided pipe as perspecification No. FG-ODF/GLT

Quantity2

Rate-

Amount -

Supplying and erecting LED street light fitting suitable above 26W to 36W lamp, including lamp, with PF 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete as per specification No FG-ODF/FLS2

Quantity2

Rate-

Amount -

Supplying and erecting LED street light fitting suitable above 40W to 48W lamp, including lamp, with PF 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete as per specification No FG-ODF/FLS2

Quantity30

Rate-

Amount -

Supplying and erecting highbay LED fitting IP 65 with lamp 80W, PF 0.95 of approved make and dulyconnecting complete with accessories as per specification no. FG-ODF/LED

Quantity15

Rate-

Amount -

Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board.

Quantity16

Rate-

Amount -

Supplying and erecting regular/ standard model Ceiling fan of 600mm. sweep complete erected in position as per specifcation no.FG-FN/CF

Quantity2

Rate-

Amount -

Supplying and erecting regular/ standard model Ceiling fan of 1200mm. sweep complete erected in position as per specifcation no. FG-FN/CF

Quantity16

Rate-

Amount -

Providing and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 R.P.M. Oscillating type, plastic or metal blades chromeplated guard with regulator and moisture proof treatment to winding andwith ‘E’ class insulation and marking Sr. No. and date of erection.

Quantity2

Rate-

Amount -

Supplying and erecting cylindrical shaped integral decorative with high power 12W-16W LED bollard upto 1000mm with opal acrylic diffuser and IP65 protection on provided foundation complete.

Quantity30

Rate-

Amount -

Supplying, installing, testing & commissioning of 1400 VA TO 1600 VA Digital pure sine wave inverter based on IGBT technology single phase 230V,50 Hz complete as per specification no. AP-INV (Without batteries)

Quantity3

Rate-

Amount -

Supplying, installing, testing & commissioning of 2500 VA Digital pure sine wave inverter based on IGBT technology single phase 230V,50 Hz complete as per specification no. AP-INV (Without batteries)

Quantity3

Rate-

Amount -

Supplying & erecting On line UPS pure sine wave of 5 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification No. AP-UPS

Quantity4

Rate-

Amount -

Supplying and erecting 12 V/180AH TUBULAR Battery with battery terminal wire, duly charged complete with 36 months warranty complete

Quantity6

Rate-

Amount -

Supplying, installing, testing and commissioning of 11 kWp off grid solar power pack with GI mounting structure and interconnecting wires / cables along with 24V/12V pure sine wave solar power inverter (THD5%), 24V/12V charge controller and 24V/12V C-10 rated lead acid battery bank of required capacity and required SPV modules for battery backup of 6 hrs complete, with 5 years on site performance warrantee as per Specification no. ESD-RT-OFG

Quantity1

Rate-

Amount -

Supplying & erecting street light control panel in powder coated CRCA 14/16 SWG sheet, outdoor type, three phase, 415Volts consisted of suitable rating contactor, 24 Hrs Digital/ Astronomical time switch, TPN MCB 63 Amp, Auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc for automatic operation & overcurrent, short circuit, earth fault protection of street lights upto the max load of 12 kW on provided iron frame / CC foundation complete .

Quantity2

Rate-

Amount -

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 6 poles for outgoing SP MCB’s on iron/ G.I. frame/wooden board as per specification No. SW-SWR/MCBDB

Quantity13

Rate-

Amount -

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 10 poles for outgoing SP MCB’s on iron/ G.I. frame/wooden board as per specification No. SW-SWR/MCBDB

Quantity6

Rate-

Amount -

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 Pole MCCB as Incommer & outgoing SP MCB (12 Poles) or TP MCB of 4 ways (12 Poles) on iron/ G.I. frame. (Vertical Busbar type) as per specification no. SW-SWR/MCBDB1

Quantity2

Rate-

Amount -

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 Pole MCCB as Incommer & outgoing SP MCB (24 Poles) or TP MCB of 8 ways (24 Poles) , on iron/ G.I. frame. (Vertical Busbar type) as per specification No. SW-SWR/MCBDB1

Quantity5

Rate-

Amount -

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 Pole MCCB as Incommer & outgoing SP MCB (36 Poles) or TP MCB of 12 ways (36 Poles) on iron/ G.I. frame. (Vertical Busbar type) as per specification No. SW-SWR/MCBDB1

Quantity9

Rate-

Amount -

Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB

Quantity2

Rate-

Amount -

Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A. 2 pole complete as per specification No. SWRCCB/RCCB

Quantity2

Rate-

Amount -

Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 40A 2 pole complete as per specification No. SWRCCB/RCCB

Quantity2

Rate-

Amount -

Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 63A 2 pole complete as per specification No. SWRCCB/RCCB

Quantity2

Rate-

Amount -

Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 6 way outgoing or 400A incoming and 6 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB.complete.

Quantity2

Rate-

Amount -

Providing & erecting Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 6 way outgoing or 400A incoming and 8 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB complete .

Quantity2

Rate-

Amount -

Supplying and erecting approved make 11kV, 630A, Vacuum Circuit breaker of required rating, on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / VCB

Quantity2

Rate-

Amount -

Supplying , erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 1Way Outdoor, Extensible motorised SCADA compatible RMU as per Electric Supply Co. Specification consisting of 1No. feeder with VCB. | 1VCB as per specifiaation no. SW-HTS / RMU SCADA

Quantity1

Rate-

Amount -

Supplying and erecting earth fault module for MCCB with adjustable earth fault sensitivity selection 10% to 50% of nominal current (In) and adjustable time delay 100/200 millisecond suitable for upto 200A MCCB with inbuilt CT's complete .

Quantity1

Rate-

Amount -

Quantity2

Rate-

Amount -

Supplying, erecting, testing, commissioning 11 KV H.T. metering cubical (Compact Type) approved by MSEDCL/Licensee fabricated with 2mm.(14 SWG) M.S.sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25x6 mm electronic security lock and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover ( C.T.P.T COVER) interlock with meter doors, epoxy coated 3 nos C.T having required ratio between 5/5A to 50/5A, VA10,Class0.5S, 11000/V3/110/V3 VA 50, class 0.5 epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc complete duly tested by Licensee with necessary Test Certificates and erected on provided plinth/ C.C foundation

Quantity1

Rate-

Amount -

Supplying, installtion & marking of Surge arrestor/ Surge Protection Device at the main distribution board after the incoming breaker of Type 1+2 conforming to IEC 61643- II tested for Imax 100 kA for Single Phase & Neutral as per specification no. CP-SPD

Quantity1

Rate-

Amount -

Supplying and erecting 100 kVAR, Three phase, 50 cycles, Capacitor Duty Contactor with delatching mechanism Micro processor APFC controller with MPP /APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP /APP type capacitor units confirming to Latest IEC with detuned aluminium filter 7% reactors with cicruit breaker as main incomer and MCCB for each branch protection, as per specification no ESD-APFC

Quantity1

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq mm aluminium conductor with continuous 5.48 sq mm (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Quantity2000

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq mm aluminium conductor with continuous 5.48 sq mm (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Quantity1300

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 4 core 16 sq mm aluminium conductor with continuous 5.48 sq mm (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Quantity500

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 3½ core 35 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Quantity200

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 3½ core 120 sq mm aluminium conductor with continuous 12.97 sq mm (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Quantity500

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq mm aluminium conductor with continuous 12.97 sq mm (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Quantity600

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Quantity200

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Quantity200

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Quantity400

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Quantity500

Rate-

Amount -

upplying , erecting & terminating 3 x 240 sq mm 11 kV, XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No. CB-HT

Quantity500

Rate-

Amount -

Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification No. CB-JT/HT

Quantity2

Rate-

Amount -

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification No. CB-JT/HT

Quantity2

Rate-

Amount -

Supplying & laying (including excavation) 15 cm dia RCC Hume pipe with coupling collar of standard thickness at required depth up to 90 cm below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Quantity300

Rate-

Amount -

Supplying & laying (including excavation) 25 cm dia RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Quantity200

Rate-

Amount -

Supplying and laying (including excavation) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Quantity300

Rate-

Amount -

Supplying and laying (including excavation) 200 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Quantity400

Rate-

Amount -

Supplying & erecting FRP box of size 300mm x 200mm x 125 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB

Quantity20

Rate-

Amount -

Supplying & erecting FRP box of size 250mm x 200mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB

Quantity20

Rate-

Amount -

Supplying & erecting FRP box of size 150mm x 125mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB

Quantity20

Rate-

Amount -

Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Quantity50

Rate-

Amount -

Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Quantity100

Rate-

Amount -

Supplying and erecting 12.5 m (clear height) High Mast (Top-150mm, Bottom- 360mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 6 nos. luminaries and its control gear box, lightning finial, arrangement for fixing aviation light and foundation bolts on provided foundation as per specification No. OH-PL/HM (excluding luminaries.)

Quantity2

Rate-

Amount -

Supplying and erecting 16 m (clear height) High Mast (Top-150 mm, Bottom- 410mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 12 nos. luminaries and its control gear box, lightning finial, arrangement for fixing aviation light and foundation bolts on provided foundation as per specification No. OH-PL/HM (excluding luminaries ).

Quantity2

Rate-

Amount -

Providing & erecting 6 m high (clear height) galvanised OCTAGONAL pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification No. OH-PL/OPL

Quantity35

Rate-

Amount -

Providing and erecting Galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification No. OH-PL/PBKT

Quantity1

Rate-

Amount -

Providing and erecting Galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification No. OH-PL/PBKT

Quantity32

Rate-

Amount -

Supplying and erecting Outdoor Stand Mounted Feeder Pillar for highmast of the same manufacturer with 32A TPN MCB incomer, single dial timer switch, 25 A TP contactor for automatic switching of luminaries, 2 no 9A contactors and raise/lower push button, and provision for termination of adiquite size of Incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete. .

Quantity3

Rate-

Amount -

Supplying & erecting single pole cut point channel set of for 11 kV HT OH line, two channel of size 100 x 50 mm 1.6 m long having stud angle of size 50 x 50 x 6 mm 1.5 m long with with necessary clamps, nut bolts etc. complete .

Quantity1

Rate-

Amount -

Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification No. EA-EP

Quantity4

Rate-

Amount -

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification No. EA-EP

Quantity2

Rate-

Amount -

Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 kg Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI

Quantity4

Rate-

Amount -

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.

Quantity200

Rate-

Amount -

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.

Quantity200

Rate-

Amount -

Supplying and erecting G. I. Earth Wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/conduit with screws in an approved manner.

Quantity300

Rate-

Amount -

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non corrosive bond in an approved manner with joints required. As per specification No EA-EP.

Quantity100

Rate-

Amount -

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bond in an approved manner with joints required. As per specification No EA-EP.

Quantity200

Rate-

Amount -

Supplying and Erecting approved make Compact Substation with 315 kVA,3 phase, 50 c/s ONAN Type UNIPACK 21KA for 3 Sec. SF6 insulated Non-Extinsible Compact switchgear (Type DV-NE) consisting of one No. Direct Cable madule and One No. Fixed Manual Vacuum Circuit Breaker in SF6 insulated stainless steel enclosure, with series trip, self powered microprocessor based numerical over current relay (IDMTL + Inst.) protection. Interconnection between HT switchgear and transformer shall be using 1Cx3x150 sq.mm Al. unarmorured XLPE Cable.Copper wound transformer 315 KVA 11KV/433V DYn11 Oil filled, INDOOR TYPE TRANSFORMER BUSHINGS,hermatically sealed transformer with corrugated wall,without conservator type of design & Top Normal Porcelein Bushings for HT & LT with Off load tap switch of rating +5% to -10% @2.5%. Temp Rise - Oil/Winding 40/45 Deg cel. Losses (Subject to IS 1180 Energy Efficiency level 2 ) - Max @ 50% Loading : As per IS 1180 and Max @ 100% Loading : As per IS 1180 and Impednace As per IS 1180 with LV PANEL-500 AMPS ALUMINUM BUSBAR ( 100% for Phase and 50% for eutral, Current Density - 1amp/sqmm) with Outgoings 500 Amps 433V 4P 50Hz 35KA ICOG Fixed Manual Type Moulded case Circuit Breaker (MCCB) with Microprocessor based release for Overload , short circuit & earth Fault protection., Multifunctional Meter with Class 1.0Accuracy with RS 485 Port, RYB, ON/OFF Trip ndications, OUTDOOR ENCLOSURE having IP54 IP54 egree of protection for HT & LT switchgear ompartment & IP23 degree of protection for Transformer compartment, owder /Colour Caoated Enclouser, with Interconnection Between HT switchgear & Transformer using 1Cx3x150 Sq.mm XLPE AL Single core cable. Interconnection between transformer & LT switchgear using Al. Busbars. Internal earthing connections by using 50x6 mm GI Strips including Transformer Neutral, omplete as per pecification No SSTR/ COMP with necessary permission of Electrical Inspector

Quantity1

Rate-

Amount -

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated.

Quantity2

Rate-

Amount -

Providing Round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook.

Quantity2

Rate-

Amount -

Quantity2

Rate-

Amount -

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal use, scissors, antiseptic solution (Savlon or similar) etc. (All above contents shall be of standard makes)

Quantity2

Rate-

Amount -

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. Capacity Cartridge type conf. To IS 2878 /15683 Complete erected with necessary clamp made front 50x6 mm. M. S. flat with nut & bolts grouted in wall complete.

Quantity2

Rate-

Amount -

Supplying, Erecting and Commissioning of Diesel generating set with alternator of 100 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, alongwith standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722- 2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. as per specification no. GEN-DG

Quantity1

Rate-

Amount -

Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for Diesel Generating Set of upto 100 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

Quantity1

Rate-

Amount -

Supplying and erecting set of Engine Safety Unit suitable for DG set upto 125 KVA as per specification no

Quantity1

Rate-

Amount -

Supplying and erecting SMPS Battery Charger input voltage 230 V A.C. & output voltage 12 V DC, charging current 10A suitable to charge DG set Battery

Quantity1

Rate-

Amount -

Supplying & erecting 12 V 180 AH heavy duty plate type Battery with terminal wire duly charged complete suitable for DG set with warranty for 3 years

Quantity1

Rate-

Amount -

Supply, Installation, Testing & Commissioning of IB LED ICBW02-20Watt or equivalent (IP 65) complete erected in position as per specification.

Quantity10

Rate-

Amount -

Supply, Installation, Testing & Commissioning of 10.4W non adjustable downlight with depth 55 mm, CRI90 ,3000K CCT , Lumen 1075 lm with a 33 deg clear PC reflector including LED POWER SUPPLY 350-500mA-DC and an efficacy of 110 lm/W Make: Delta Cat no Reo X /Erco /Kreon

Quantity20

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Trimless Flush Mounted Profile for grazing effect IP67 ( customized as per site conditions) with a flex of 21.6W/m 140XSMD LED/m of Lumen output 2100lm/m dividable per 50mm ,with a McAdam Step 3 and efficacy of 97lm/W including 24V DC power supply Make : Delta Catno: Femtoline25/Erco/Kreon

Quantity480

Rate-

Amount -

Supply, Installation, Testing & Commissioning of trimless floor uplight with narrow optics of 20deg with a recessed depth 100mm, 7W 774lm inclusing of all mounting accessories CRI90 ,colour temp (+3000K) warm white and an efficacy of 116lm/w at source (IP 67) Make: Delta Light Cat no Logic RA 93020 ANO/Erco/Kreon

Quantity310

Rate-

Amount -

Supply, Installation, Testing & Commissioning of floor mounted IP55 cylindrical Bollard of 250mm Dia and 210 mm height ,CRI80,+3000K CCT 840 Lm and efficacy 133Lm/W inclusive of Power supply. Make : Delta Light Cat no Montur R P 20 LED/Erco/Kreon

Quantity35

Rate-

Amount -

Supply, Installation, Testing & Commissioning of 6m Delta Light Pole with a net weight of 27 KG IP54 powdercoated with Qualicoat - Seaside quality label complete erected in position as per specification. Make: Delta Light Cat no : Polesano/Kreon/Erco

Quantity3

Rate-

Amount -

Supply, Installation, Testing & Commissioning of pole/surface mounted LED floodlight suitable for Polesano ,360 deg adjustable including 16X flood lens 43 deg ,CRI80 colour temp 3000K with 42W ,4500 Lumens with an efficacy of 107 Lm/W IP66 ,Class 2 complete erected in position as per specification.Make Delta light Cat no: Polesano 830 MEdium N-B /Kreon/Erco

Quantity35

Rate-

Amount -

Supply, Installation, Testing & Commissioning of floor mounted spike light with white LED 6.4W ,600lm ,CRI90 with 30deg lens including all mounting accessories and 350mA DC ,IP55 and power supply Make : Delta Light Cat no KIX M Pin/Kreon/Erco

Quantity490

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Ceiling mounted LED light with Opal glass diffuser ,Black Finish and 6.3 W ,840Lm,CRI80 and IP65 fixture including 350mA DC power supply , efficacy of 133lm/w ,Class 1,color temerature 3000K Warm white complete erected in position as per specification. Make : Delta Light Cat no Montur R LED WW /Erco/Kreon

Quantity125

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Floor surface mounted spotlight with 16.8 W ,1995 Lm and a 11 deg reflector ,CRI90 IP 65 ,efficacy of 122lm/W color temp +3000K Warm white includng 500mA DC Power Supplycomplete erected in position as per specification. Make : Delta Cat no : Kix HP 93011 N /Kreon/Erco

Quantity15

Rate-

Amount -

Supply, Installation, Testing & Commissioning of boundary wall light IP 65 rated specialized light with symmetric 360 degree crook fittings complete.

Quantity130

Rate-

Amount -

MAIN LT PANEL : Supply, Installation, Testing & Commissioning of Incomings: 1 Nos. 630Amp 4 Pole MCCB's (Ics=25KA upto 433V) CT's of ratio 600/5Amps 1 Set Digital type ammeter (0-600Amp) and Voltmeter (0-500V) with selector switch - 1 Set. Bus Bars: TPN aluminium bus bars of minimum of 800 Amps capacity with heat shrinkable coloured sleeves and I/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. Outgoings : 4 Nos. 100Amp TPN MCB's (Ics=10KA upto 433V) 2 Nos. 250Amp TPN MCB's (Ics=10KA upto 433V) 6 Nos. 63Amp TPN MCB's (Ics=10KA upto 433V) 2 Nos. 40Amp TPN MCB's (Ics=10KA upto 433V) 3 Nos. 25Amp TPN MCB's (Ics=10KA upto 433V)

Quantity1

Rate-

Amount -

DISTRIBUTION PANEL : Supply, Installation, Testing & Commissioning of Incomings: 1 Nos. 100Amp 4 Pole MCCB's (Ics=25KA upto 433V) CT's of ratio 100/5Amps 1 Set Digital type ammeter (0-100Amp) and Voltmeter (0-500V) with selector switch - 1 Set. Bus Bars: TPN aluminium bus bars of minimum of 200 Amps capacity with heat shrinkable coloured sleeves and I/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. Outgoings: 10 Nos. 63Amp TPN MCB's (Ics=10KA upto 433V) 4 Nos. 63Amp TPN MCB's (Ics=10KA upto 433V) 6 Nos. 63Amp DP MCB's (Ics=10KA upto 433V)

Quantity3

Rate-

Amount -

ELECTRICAL WORKS (FOR PHE SYSTEM) Providing, installing, testing and commissioning of variable speed (VSPS) hydro pneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No. remote sensors, pressure transducers, sequence running controller, dry running Protection, motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragm tank with interchangeable butyl rubber membrane, complete in all respects including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves (ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required. The entire Hydro pneumatic system shall be factory fitted. Make-Grundfos/Wilo/Zylem For Domestic Water Supply at Water Supply Pump Room Set of Two Pumps ( 1 Working + 1 Standby) Capacity - 4.5 LPS (Each) Head - 45.0 M. H.P. - 5.0 HP (Approx.) Water Supply & Drainge Pumps

Quantity1

Rate-

Amount -

Providing, installing, testing and commissioning of variable speed (VSPS) hydro pneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No. remote sensors, pressure transducers, sequence running controller, dry running Protection, motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragm tank with interchangeable butyl rubber membrane, complete in all respects including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required. The entire Hydro pneumatic system shall be factory fitted. Make-Grundfos/Wilo/Zylem For RO Water Supply at Water Supply Pump Room Set of Two Pumps ( 1 Working + 1 Standby) Capacity - 2.5 LPS (Each) Head - 45.0 M. H.P. - 3.0 HP (Approx.)

Quantity1

Rate-

Amount -

Supply, installing, testing and commissioning of submersible open impeller non-clog pumps with C.I.body and to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, arrangement for both pumps together incase of emergency, audible hooter for failure or flooding, dry running Protection, including GI Medium class pipe delivery header with CI Butter fly valve, CI Dual plate non return valve, rubber vibration eliminators & level controller complete in all respects., painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge. (Pumps shall be installed in a set of two pumps One working and One standby) Make-Grundfos/Wilo/Zylem Basement & Pump Room Drainage Pumps (Pumps to be suitable to handle solids upto 12 mm size) Capacity - 4.0 LPS (Each) Head - 15 M H.P. - 1.5 HP Approx.

Quantity5

Rate-

Amount -

Supply, installing, testing and commissioning of submersible open impeller non-clog pumps with C.I.body and to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, arrangement for both pumps together inacase of emergency, audible hooter for failure or flooding, dry running Protection, including GI Medium class pipe delivery header with CI Butter fly valve, CI Dual plate non return valve, rubber vibration eliminators & level controller complete in all respects., painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge. (Pumps shall be installed in a set of two pumps One working and One standby) Make-Grundfos/Wilo/Zylem Sewage Sump Pumps (Pumps to be suitable to handle solids upto 40 mm size) Capacity - 4.0 LPS (Each) Head - 15 M H.P. - 2.0 HP Approx.

Quantity2

Rate-

Amount -

Supply Installation, Testing& Commissioning of vertical self supporting Filter fabricated from MS sheet as per IS: 2825, ((minimum thickness of shall 6 mm and dished end 8 mm)) pressure gauges, sample cock, GI class 'C' face piping, CI butterfly valves and all accessories , with initial charge of filter media including anthracite, painting inside with epoxy paint and outside with two coat of red oxide primer and two or more coat of synthetic enamel paint, testing and commissioning complete. Make- Pentair/ION Exchange/Thermax Dual Media Filter For Domestic Water Supply Capacity- 7200 LPH Filtration rate- 14000 LPH/Sqm. Filter dia approx. - 900 MM Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm

Quantity1

Rate-

Amount -

Supply Installation, Testing& Commissioning of vertical self supporting Filter fabricated from MS sheet as per IS: 2825, ((minimum thickness of shall 6 mm and dished end 8 mm)) pressure gauges, sample cock, GI class 'C' face piping, CI butterfly valves and all accessories , with initial charge of filter media including anthracite, painting inside with epoxy paint and outside with two coat of red oxide primer and two or more coat of synthetic enamel paint, testing and commissioning complete. Make- Pentair/ION Exchange/Thermax Activated Carbon Filter For Domestic Water Supply Capacity- 32400 LPH Filtration rate- 14000 LPH/Sqm. Filter dia approx. - 900 MM Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm

Quantity1

Rate-

Amount -

Supply Installation, Testing& Commissioning of metering pump type chemical doser with 100 lits. HDPE chemical grade solution tank, injection fitting assembly, suction and delivery hose up to the point of injection, capacity 0-6 lph, complete in all respects.

Quantity1

Rate-

Amount -

Supplying, installation, testing and commissioning of skid mounted fully automatic Reverse Osmosis System of output capacity 600 litres / hour designed at a minimum Flux at inlet complete as required with the following items: Make- Eureka Forbes/ AO Smith/ ION Exchange, Garnet Filter (GF) - 1 No., Media for GF - 1 LOT, Antiscalant Dosing System with level sensors - 1 Lot, Cartridge Filter - 1 No., High pressure pump - 2 Nos (1W + 1St). , R.O. Block - 1 No., Membranes - As per manufacturer design, Pressure Tubes - 1 No., RO skid - 1 No. pH correction system - 1 No., Necessary instruments - 1 Lot, Interconnecting pipe with necessary valve work - 1 Lot, PVC (upto HP Pump) - 1 Lot, SS (HP Pump to Membrane) - 1 Lot, Pressure gauges - 5 Nos., Rotameter - 2 Nos.", "PPLC cum instrument panel - 1 No., Conductivity Indicator - 1 No., Level sensors (Antiscalent Tank) - H/L Level sensors (Permeate Tank) - H/L, Solenoid Valve (Inlet) to R.O. tank - 1 No., Solenoid Valve (Reject) - 1 No. The reverse osmosis block shall be duly supplemented with adequate pretreatment and post treatment equipment such as filter sodium metabisulphate dosing, anti-scalant dosing and post RO treatment pH " "correction dosing etc. in line with the raw water characteristics and the required treated water parameters. The plant should consist of the following automation: The plant starts when the level at R.O. water storage tank is low and stops when the level at R.O. water storage tank is high. When the level is low, the raw water pump starts. High pressure pumps starts after two minutes of starting of raw water pump. The reject valve closes after 1 minute of starting of high pressure pump. If the pressure at high pressure pumps suction is low / high, the plant trips. When the plant stops due to high level, first the high pressure pump stops and the dump valves opens, after two minutes the raw water pumps and dosing pump stops. When the connectivity is high an alarm is given. The MIMIC provides indications for all the I/Ps and the respective O/Ps. R.O. plant as described above.

Quantity2

Rate-

Amount -

Supply, installation, testing and commissioning of stainless steel R.O water storage tank (SS 316) with minimum thickness of shell is 4 mm and base is 5 mm placed at Pump Room with inlet, outlet, overflow connection complete with 25 mm dia bend for vent, ball valve for scour, mosquito proof brass overflow grating and 600 mm dia manhole cover with lockable arrangement, insulated with 50 mm thick glass wool and wrapping with 24g aluminium sheet duly riveted complete as per direction of Engineer-in-charge. 3000 Litres Capacity

Quantity2

Rate-

Amount -

"Design, manufacture, supplying, fixing in position, testing and commissioning of the following front operated cubicle type, front access 2mm thick mild steel sheet, free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system and suitable for a fault level of 25 MVA symmetrical at 415 volts. All switchboards shall have provision for entry of cables from the top or bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used. Padlocking facility shall be provided on all outgoing feeders doors and switch handles shall be lockable in OFF position. " "Electric Panel For Water Supply Pumps at Water Supply Pump Room INCOMING a)1 No. 200 amps TPN MCCB with the following accessories: b)1 No. square flush mounting 0-500 volts scaled voltmeter with three way and OFF switch. c)Three phase indicating lights. Electrolytic high conductivity three phase and neutral tinned copper bus bar rated at 300 amps having a current density of 1 amp per Sqmm suitable to with stand symmetrical fault level of 25 MVA at 415 volts. The neutral bus bar is to be of 100% capacity. OUTGOING UNITS d) Four 32 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA e) Four 63 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA f) 02 Nos. TPN MCCB of 125 A with 25 KA service breaking capacity for domestic & RO water hydro pneumatic pumps. (Only connection to inbuilt panel of Domestic /RO water hydro pneumatic system) g ) 4 Nos. fully automatic DOL starters with push buttons and ON/OFF indicating lights and overload relays for 1.5 to 7.5 HP pump . h) 4 Nos. rotary selector switch for selecting mode of operation i.e. auto/manual/off. i) 4 Nos. cyclic relay for automatic duty changeover of pumps. j) 4 No. single phase preventers. k) 4 Nos. square flush mounting 0-30 amps scaled ammeters with three way and OFF selector switch. l) Space for 2 Nos. Level Controllers. m) Switchgear shall be suitable for the HPS of various motors. n) 4 Nos. 63 Amp. TPN MCB for Hydra pneumatic Pumps. o) 4 Nos. 32 Amp. TPN MCB Spare. The motor control panel shall be prewired with colour coded wires with identification labels complete in all respects as required.

Quantity1

Rate-

Amount -

For Drainage Sump Pump One incoming main MCCB unit of 63 amps rating. Copper bus bar is separate chamber fully taped of 100 amps capacity. Two MCB units of 25 amps Two fully automatic DOL starters with push buttons and on/off indicating lights. One rotary duty selector switch Two manual/auto/off switches. Two single phasing presenters. One panel type voltmeter with rotary selector switch for reading voltage between phases. Two ampere meters one for each motor. Three neon phase indicating lights on the incoming mains. Space for one liquid level controllers. All internal wiring colour coded from incoming mains to various switchgear, starters, meters, indicating lamps and bus bar with a changeover facility to run each pump alternatively with an alarm bell in case of both pump’s running at one time. Switchgear offered must be compatible with the HP of the motors offered. Motor control centre as described above

Quantity1

Rate-

Amount -

Providing & Fixing 1000 Litres per hour capacity water chilling plant complete with all respect.

Quantity1

Rate-

Amount -

"Supply, installation, testing and commissioning of Outdoor Bullet/BOX Camera: Supply of 5MP Bullet camera Total sensor pixels 5MP 2592*1944@25/30FPS, Built-in/external 850nm IR illuminator intensity adjustable with 50meter viewing distance, Fully configurable triple streaming with minimum 3 streams should be configure at h.265,Color 0.5lx, Mono 0.05 lx, With IR 0.0 lx, 120dB WDR AS PER IEC62676-PART5 , True day/night, Electronic shutter, DNR, BLC, defog, Privacy Masking- Four independent areas, fully programmable, Full duplex / half duplex Audio Streaming, Varifocal 9 to 22 mm lens auto zoom and focus, Micro SD card slot with minimum 512GB , three layer Password protection,HTTPS, TLS1.2, AES256 Bit encryption, camera temp support minimum +60deg c ,ONVIF Profile S, IP67, IK10, CE, FCC,NDAA, UL Certified. Camera shall support analytics Line crossing Enter field Follow route Loitering Removed object object counting. Approved Makes: Axis/Bosch/ Pelco/Avigilon/Mobotix"

Quantity105

Rate-

Amount -

Outdoor PTZ Camera: Supply, installation, testing and commissioning of 1080p HD IP outdoor PTZ Cameras with 1/3" or better progressive scan Exmor CMOS , 1920 (H) X 1080 (V); @60fps, 2 MP or better, 30 X opticalZoom (4.3~4.5 mm -129~135 mm) , 12X Digital Zoom, Minimum illumination Sensitivity- Color 0.05 lx , B/W : 0.01 Lx , WDR Min 90 as per IEC62676-PART 5 , Dynamic Noise Reduction, Backlight compensation BLC , Fully configurable triple streaming with minimum 3 streams should be configure at h.265, White Balance, Mechanical Switchable IR filter , PAN Range 360 Degree continuous, Tilt Range +15 to -90 degree, PAN/TILT Modes- PAN preset 240 Deg / s, Tilt preset 120 deg / S, Presets 256 , Tours , Audio 1/1 Channel In/Out , Micro SD card slot with minimum 512GB , three layer Password protection,HTTPS,public key infrastructre, encryption TLS1.2,AES256 Bit encryption, 24 individually configurable privacymasks, Alarm inputs/ outputs -1/1 , IR Distance 150 meter (360 deg rotation) without loss of any details , Dual Power option (POE -Power on Ethernet +, AC) , IP-66 , IK10, ONVIF Profile S, G,T, camera support minimum operating temperature with IR +60deg c,CE , UL Certified ,NDAA with all mounting accessories. motion detection and camera tampering analytics Approved Makes: Axis/Bosch/ Pelco/Avigilon/Mobotix

Quantity13

Rate-

Amount -

Supply installation, testing & commissioning of Pole For Mounting of PTZ camera

Quantity4

Rate-

Amount -

Storage and VMS Software: Supplying, Installation, Testing & Commissioning of Server/storage based video management System Software for license of min 120 camera for viewing and recording expandable upto 128 cameras and shall be of same camera OEM, minimum and 2 client workstation , Support VMS client for live and playback, Support Remote Access, ,VMS shall have the capability to change the resolution and fps on recorded video to increase storage capacity, FIPS140-3 Encrytion, complete in all respects as per specifications. Supply, installation, testing and commissioning of RAID-5 protected (standard configuration), all-in-one video management solution for up to 128 channels,dual port Gigabit Ethernet network interface,16 GB system memory an Intel Xeon 4210,Processor, 96 TB Gross capacity storage type 12 Trays: 3.5-inch SATA, 8TB HDD, supports minimum 450 mbps bandwidth, Microsoft Windows Storage Server 2019,iDRAC, NVDIA Quadro 2GB Grpahic card, 4*mini display port Approved Makes: Axis/Bosch/ Pelco/Avigilon/Mobotix

Quantity1

Rate-

Amount -

Client Computer Supply, installation, testing and commissioning of PC with Operating system Windows 8.1 (64-bit, Professional or Enterprise)Windows 10 (64-bit, Professional or Enterprise, patched with Anniversary, CPU Intel Core i7 4770 3.4 GHz (up to 3.9 GHz) RAM 8 GB, Free disk space Minimum 3 GB for Single Site Systems ,Minimum 5 GB for Enterprise Systems, Network card 1000Base-T and supported upto 4 Graphics Card with 21” or higher professional monitor (1920x1080 or higher resolution) Approved Makes: HP/Dell/IBM

Quantity1

Rate-

Amount -

Monitor Supply, installation, testing and commissioning of 42" LED Monitor Complete with Wall mounting kit Approved Makes: Sony/Panasonic/ LG

Quantity4

Rate-

Amount -

Supply, installation, testing and commissioning of Industrial Grade Layer 2 Switch with 16 PoE Port and 2 optic fiber ports with suitable wall mount rack. Approved Makes: Cisco/D-Link/TP Link

Quantity8

Rate-

Amount -

Supply, installation, testing and commissioning of Industrial Grade Layer 3 Switch with 16 PoE Port and 16 optic fiber ports with suitable wall mount rack. Approved Makes: Cisco/D-Link/TP Link

Quantity1

Rate-

Amount -

Supply, installation, testing and commissioning of unarmoured 12 core single mode OFC as per tender specification

Quantity1800

Rate-

Amount -

Supply, installation, testing and commissioning of OFC accessories like 24/36 Port LIU24 , Splice trays, Loaded Adaptor and Blank Plates, UTP and Optical Patch Cords , pigtails etc. as per schematic and system design of tender specification

Quantity1

Rate-

Amount -

Supply, installation, testing and commissioning of Armoured 3x1.5 sq mm Power Cable

Quantity1800

Rate-

Amount -

Supply, installation, testing and commissioning of 9U wall mount RACK with power strip MS powder coted & Mounts as required.

Quantity1

Rate-

Amount -

supply, installation, Testing & commissioning of Floor mountable Equipment rack with openable door and power strip suitable for control equipments. Along with inbuilt Fire Suppression system with following specifications…… 3.0 Ltr Cylinder with Valve, Agent (Novec 1230),Master Kit comprising of Solenoid Actuator with manual override,Discharge hose, Pressure gauge, Connectors, Cylinder support straps, Discharge pressure switch,Power Supply Unit, Control Unit, Display Unit, Multisensor detectors (2 nos), Time delay,Harness & Connectors.Nozzles (2 Rack discharge).

Quantity4

Rate-

Amount -

FIRE ALARM SYSTEM

Quantity-

Rate-

Amount -

supply, installation, Testing & commissioning of Analogue Addressable Fire Alarm Control Panel expandable via plug-in loop driver boards, loop current 500mA maximum per loop, dual flash based microprocessor, supports to connect 240 addressable devices one each loop via fully digital communication protocol, equipped with a white backlit display (240x64 pixel resolution) graphical LCD Display with at least 6 lines of information, 400 fire zones (soft zones), fully programmable via alphanumeric keypad or configuration software, dedicated USB and RS-232 serial port for direct or PC connection. 5000 events storage, loop current 500 mA, panel shall be equipped with in-built multi-meter for live monitoring of loop current, earth voltage, loop voltage etc., installer's logo application, network card to network with compatible addressable panel(s) and repeater panel(s), capable to connect maximum 200 network nodes on a standard network, features battery charger status and temperature, supports programmable cause / effect on outputs, panel housing meets IP30 ingress protection classification finished in RAL 7035, 1 Year Warranty, Independently certified as complying with requirements of BS EN 54 Part 2, 4, and 13. Approved by: British Standards Institute (BSI) and Vertrauen durch Sicherheit (VdS). Make : ADVANCED/APOLLO/NOHMI 4 Loops

Quantity1

Rate-

Amount -

supply, installation, Testing & commissioning of Intelligent Analogue Optical Smoke Detector with advanced optical chamber and smoke inlet design to provide resistance to entry of dust to provide immunity to false alarms, programmable multiple smoke sensitivity level setting, bi-directional in-built short circuit isolator to protect against cable faults, dual bi-colour LED's with 360o view of status, auto-addressable/electronically addressed, utilises fully digital communication addressable protocol with high noise rejection (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device). Approved by LPCB for EN 54-7 & EN 54-17 standard.Make : ADVANCED/APOLLO/NOHMI

Quantity160

Rate-

Amount -

supply, installation, Testing & commissioning of Intelligent Analogue Class-P Heat Detector with two thermal sensitivity level, the two level corresponds to rate-of-rise (ROR) A1R Class (most sensitive) and Class BS (least sensitive), thermal alarm threshold for ROR A1R Class 58oC and BS Class 58oC, bi-directional in-built short circuit isolator to protect against cable faults, dual bi-colour LED's with 360o view of status, auto- addressable/ electronically addressed, utilises fully digital communication addressable protocol with high noise rejection (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device). Approved by LPCB for EN 54-5 & EN 54-17 standard.Make : ADVANCED/APOLLO/NOHMI

Quantity10

Rate-

Amount -

supply, installation, Testing & commissioning of Conventional Wall Sounder with Beacon for providing Audible and Visual Alarms in response to the output signal from the control panel, 32 selectable tone and adjustable sound level, maximum output volume @ 1M distance 100 dB(A), output tone frequency range 440 Hz to 2900 Hz, Visual alarm device output frequency 0.5 Hz, Approved by LPCB for EN 54-3 standard.Make : ADVANCED/APOLLO/NOHMI

Quantity8

Rate-

Amount -

supply, installation, Testing & commissioning of Intelligent Analogue Manual Call Point with resettable operating element, with in-built bi-directional short circuit isolator. Bi-Colour LED for local indication of device status, single action operation, reset to normal condition using special reset key, clearly visible alarm flag in the activated state (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device). Approved by LCPB for EN 54-11 standard.Make : ADVANCED/APOLLO/NOHMI

Quantity8

Rate-

Amount -

supply, installation, Testing & commissioning of Intelligent Analogue Single Relay Output Module, microprocessor controlled interface module for control of third party/auxiliary devices using single volt-free change-over relay contact, with in-built short circuit isolator, Bi-colour LED's for local indication of device status, auto-addressable/ electronically addressed, utilises fully digital communication addressable protocol with high noise rejection (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device). Approved by BSI for EN 54-17 & EN 54-18 standard.Make : ADVANCED/APOLLO/NOHMI

Quantity4

Rate-

Amount -

supply, installation, Testing & commissioning of Intelligent Analogue Monitor Module, microprocessor controlled interface module for control of third party/auxiliary devices using single volt-free change-over relay contact, with in-built short circuit isolator, Bi-colour LED's for local indication of device status, auto-addressable/ electronically addressed, utilises fully digital communication addressable protocol with high noise rejection (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device). Approved by BSI for EN 54-17 & EN 54-18 standard.Make : ADVANCED/APOLLO/NOHMI

Quantity4

Rate-

Amount -

Supply, installation, testing and commissioning of 2x1.5sq. mm. 600V Mineral Insulated Copper Cable with seamless outer copper sheath Fire Survival type, which can withstand 1010 Deg C for two hours as per UL standards and shall also withstand CWZ test on one single Cable as per UL 2196. The cable shall be approved by UL, and the outer sheath of the cable shall be seamless in construction, The cable should be supplied and installed with all accessories as per UL Standards Make: nVent / PYROTENAX / JIULI

Quantity3000

Rate-

Amount -

Supply, installation, testing and commissioning of Glands & seals for above cable complete as required. Make:- nVent/ PYROTENAX/ JIULI.

Quantity388

Rate-

Amount -

Supply, installation, testing and commissioning of Digital Signal Processor with 2 x XLR IN, electronically balanced audio input,6 x XLR OUT, electronically balanced audio output with 2 x XLR Thru out ,and 1x XLR AES/EBU IN digital input,with Nominal Input Voltage:1.23V / +4 dBu, maximum output voltage:8.7V / +21 dBu,input impedence :10k Ohm,CMR:-80dB@1kHz,A/D &D/A coversion :24 bitsigma delta,THD+N 0.01%.

Quantity1

Rate-

Amount -

Supply of Dual 12" Two-Way Weatherised Vertical Line array Speaker (IP 55 rated or better) with a Frequency Response(-3dB):- 100-14KHz & Long Term Power Handling of= 600W. Power Taps @100V : 150W,300W,600W.The Loudspeaker should have a Sensitivity(1W/1m) of 105dB with Max. SPL of =139dB peak. OEM Munting Grid included.

Quantity16

Rate-

Amount -

Supply, installation, testing and commissioning of Dual/Four channel power amplifier with inbuilt DSP, Max Midband Output Power =900W @ 8 Ω; =1700W @ 4 Ω & =2500W @ 2 Ω,Max Bridged Output Power=6000W @ 4 ohms,70 V & 100 V Operation,Frequency Response, ref. 1 KHz: 10Hz - 21 KHz (±1dB), THD:0.05%, Max input level = +21 dBu, input impedence:20 kΩ, Signal to Noise ratio = 104 dB, Crosstalk -80 dB with built in protection such as Audio Limiters,output delay per channel,31 band GEQ per channel,PEQ per channel, Power remote via switch,delay time selectable,floating relay contacts,inputs for presets selection.

Quantity4

Rate-

Amount -

Supply, installation, testing and commissioning of 10 channel Compact Mixing System (6 x Mic/Line + 4 x Mic/Stereo-Line), Auxiliarys (MON, FX, AUX) : 2 Pre, 2 Post, 2 Pre/Post switchable, Frequency Response, -3 dB, ref. 1 kHz : 15 Hz to 65 kHz, Crosstalk, 1 kHz Channel to Channel -80 dB, THD at 1 kHz 0.005%, CMRR MIC input 1 kHz 80 dB, Dual stereo 24/48-bit multi effects processors, 100 Factory + 20 User, Tap-Delay, Digital Audio Interface Channels : 4 In / 4 Out, AD/DA Conversion, Sampling Rate : 24-bit, 44.1 / 48 / 88.2 / 96 kHz.

Quantity1

Rate-

Amount -

Supply, installation, testing and commissioning of Freestanding Gooseneck Mic with base for podium having dual condensor back electret microphone element ,Selectable Omnidirectional/ Cardioid/ Supercardioid/ Hyper Cardioid polar pattern,LED status display and with programmable button for Push to Talk or Push to Mute functions having ,frequency response 50Hz-20kHz ,sensitivity 5.5mV/Pa,clipping level 125dB SPL ,output impendence 200 ohm, Dynamic Range 100 dB.

Quantity2

Rate-

Amount -

Supply, installation, testing and commissioning of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity 1.0 µV,Receiver Image rejection55dB,Receiver Dyanmic range 95dB and receiver having 32 channels possible,Receiver S/N ratio 100dB A,distortion 1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz

Quantity2

Rate-

Amount -

Supply installation testing and commisioning of 4 sq mm 2 core speaker cable

Quantity3000

Rate-

Amount -

Supply installation testing and commisioning of Microphone cable.

Quantity1000

Rate-

Amount -

Supply of Speakon,XLR Male & Female,Phono connector,RCA to Phono patch cord,RCA to RCA Patch cord

Quantity1

Rate-

Amount -

Supply installation testing and commisioning of of Audio Earthing

Quantity1

Rate-

Amount -

Supply installation testing & commissioning of Video wall complete with Video Processor and cabling Led Screen Details Led Pitch = P-10,(smd-rgb) Led Screen Type = RGB - Full Color Dimensions = 12(Height) x 20(Width) Feets, Total Feets = 240 sq feet, Luminance = 6000 - 7000 Nits, Led Type = Outdoors, IP65, chipset = EPISTAR - Taiwan, Power Supply = 5V , 190-124v, constant current, Scan = Constant Scanning mode Led Screen Details Led Pitch = P-10,(smd-rgb) Led Screen Type = RGB - Full Color Dimensions = 12(Height) x 20(Width) Feets, Total Feets = 240 sq feet, Luminance = 6000 - 7000 Nits, Led Type = Outdoors, IP65, chipset = EPISTAR - Taiwan, Power Supply = 5V , 190-124v, constant current, Scan = Constant Scanning mode

Quantity3

Rate-

Amount -

Supply installation testing & commissioning of Digital Public Address and Emergency Sound System Controller certified to International standards of Emergency Sound System EN 54 (IEC 60849) with following features : One working & one Hot Standby /Redundant, in case of failure of any of the controller the another system must automatic switchover without any manual intervention - Completely digital audio and control data transmission.- Fibre/ CAT 5 connection for digital network and connection to amplifiers and other interface.- In-built Digital Message storage with min 1gB capacity for 3 hrs of audio messages. - PC based programmable inbuilt Web server." - External Alarm Inputs /Programmable auto relay of pre recorded messages/Alarm tones/messages - Automatic Fault Diagnostic and reporting at central location- From Mic Capsule in call station uptil amplifiers and loudspeaker circuits.The system shall be able to make emergency calls (all calls) even if the network controller has failed- Freely programmable 200 level of priority/ around 50 Different chime/alarm tones, freely programmable/modifiable zone assignment and routing - Upgradation requires no changes in control equipment, - provision for more 248 zones from single controller - All Programmable through software. -Inbuilt message scheduler to schedule the broadcast of pre-recorded mesages. - 2 x 16-character LCD display and a rotary control to navigate through the menu. 28 simultaneous audio channels available for audio transportation between any inputs and outputs - The network controller shall have 4 analogue audio line outputs. - Sampling Frequency of controller shall be equal or more then 44.1 khz. PA System shall be fully integrated with Fire alarm system Approved Makes : Bosch/TOA/Bose -

Quantity1

Rate-

Amount -

Supply installation testing & commissioning of EN 54 certified Remote call station with interface unit is to be used for calling purpose and other applications with following features: - Connects to call station interface via CAT-5 cable - Up to 1 km from digital public address optical network - Built-in limiter - 2 supervised control inputs Approved Makes : Bosch/TOA/Bose

Quantity2

Rate-

Amount -

Supply installation testing and commisioning of EN 54 certified Digital call station extension keypad with 8 freely programmable keys with the following features- - compliant to IEC60849 - keys can be programme recall of selection, live speech call, cancel selection, BGM off, BGM volume control, programmable key for any action - Select resources: BGM selection, pre-recorded message selection, attention and alarm tone selection - 2 color LEDs on Each key at the call station keypad - a label slot for indicating the name of the action assigned to that particular key Approved Makes : Bosch/TOA/Bose

Quantity2

Rate-

Amount -

Supply installation testing and commisioning of EN 54 certified Digital Class-D Amplifier 500W each with single/dual channels as per the design/tender requirement. The amplifiers should have digital audio interface connection to network controller via Fiber optics/CAT 5 . Features- Inbuilt Digital Audio signal processing like 3 section parametric equalisation - Built in or external min 1 channel Automatic Volume control circuitry for noise sensing, Front LCD Character Display for status information. - Compliance to Standards for Emergency sound System IEC 60849 - Inbuilt Amplifier Monitoring eg for Short Circuit etc. Inbuilt Output monitoring - Loudspeaker line monioring for every zone/speaker circuit - Automatic Amplifier Changeover to hot standby amplifier in case of failure of working amplifier with internal relays. - output voltage between 100V, 70V or 50V by changing jumpers -Separate amplifiers or separate channels of amplifiers for every zone should be considered - digital signal processing for audio - 2 auxiliary audio inputs with microphone/line level selection - 8 x control inputs are freely programmable - 1 x control outputs shall be freely programmable and can be programmed for faults and calls - designed for redundant network wiring - 3 sections of parametric equalization and 2 sections of shelving equalization and audio delay Approved Makes : Bosch/TOA/Bose

Quantity20

Rate-

Amount -

Supply installation testing and commisioning of 6W ceiling mount EN 54 certified speaker with suitable fire dome having the following specification: - Max Power: 9W,Rated Power: 6Watts, Power Tapping: 6/3/1.5W - Effective frequency range(-10 dB) :90 Hz to 20KHz - SPL at rated power (1Khz at 1 m) 98 dB - Opening Angle 1 KHz / 4 KHz (-6 dB): 180/50 Diameter 216 mm (8.5 in) Maximum depth 90 mm (3.54 in) Approved Makes : Bosch/TOA/Bose

Quantity8

Rate-

Amount -

Supply installation testing and commisioning of IP65 two-way, full-range Speaker, Long throw 5.25" (133 mm) woofer housed in a UL 94-5VB fire rated ABS plastic for extended LF performance down to 55 Hz. 90 W power handling provides for 108 dB maximum SPL (114 dB Peak). 60 W transformer with 8 ȍ pass- through. Frequency response (-10 dB) 55 Hz - 20 kHz. Transformer taps: 100V: 60 W, 30 W, 15 W, 8ȍ. IP-65 Approved Makes : Bosch/TOA/Bose

Quantity64

Rate-

Amount -

Supply, installation, testing and commissioning of Rugged & beautiful green garden speaker which harmoniously merges with the outdoor garden environment. Fitted with two nos. of wide response and water resistant polypropylene speakers. Input Power - 40W RMS Power Taps on 100V - 40/20/10/5W Impedance - 250/500/1k/2kΩ Frequency Response 160-16,000Hz SPL at 1kHz (1W/1m) 88dB Approved Makes : Bosch/TOA/IC Audio/Ahuja

Quantity78

Rate-

Amount -

Supply, installation, testing and commissioning of EN 54 certified 10 W high‑efficiency ABS horn loudspeaker with weather protection IP65 - Max. Power: 15 W,Rated Power: 10 Watts, Power tapping: 10 / 5 / 2.5 / 1.25 W - Effective frequency range(-10 dB) :280 Hz to 5800 Hz - SPL at rated power (1Khz) 112 dB,Opening angle at 1 kHz / 4 kHz (‑6 dB) Horizontal 120° / 35° Vertical 125° / 35° - Self extingguishing acc. to UL94 V0 - IP65 acc. to IEC 60529, Safety acc. to EN60065 Approved Makes : Bosch/TOA/Bose

Quantity95

Rate-

Amount -

Quantity2000

Rate-

Amount -

Supply & Fixing of Glands & seals for above cable complete as required. Make: TYCO / PYROTENAX / JIULI/ nVent

Quantity490

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Network cable assembly 0.5m LBB4416/01

Quantity20

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Network cable assembly 5 m LBB4416/05

Quantity2

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Network cable assembly 10 m LBB4416/10

Quantity2

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Speaker Junction Box

Quantity245

Rate-

Amount -

Supply, Installation, Testing & Commissioning OEM Manufactured Grid for hanging Line array speakers & subwoofers

Quantity2

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Compact 2 Way/ 3 Way Line array element, with dispersion pattern (H) 90º or better ; a Frequency Response (-3dB):- 80 Hz – 19 kHz or better & Continuous Power Handling (RMS) range from 400W- 700W (100 Hrs testing).The loudspeaker should have a sensitivity of = 101dB. The Loudspeaker should have a Max. SPL (Peak) of =130 dB. It should have Minimum 2 x 8" or Better Driver for LF; = 2 x 1" drivers for HF reproduction or more. Makes: d&b/EV/Adamsons

Quantity8

Rate-

Amount -

Supply, Installation, Testing & Commissioning of flying Dual 15" arrayble subwoofer with same footprints as Main Line array elements for Arraying in the same frame, having a Freq. Range (-10 dB) of 30 Hz - 250Hz & Freq. It should have an axial Sensitivity of = 99dB (1W/1m) or more delivering a Max. Calculated SPL(Continious) of =128 dB.The loudspeaker should have a nominal impedence :4ohm and continuous Power Handling of 1000W or more.Makes: d&b/EV/Adamsons

Quantity2

Rate-

Amount -

Supply, Installation, Testing & Commissioning of compact two-way loudspeaker Freq. Response1 (-3 dB):70 Hz - 16 kHz Freq. Range1 (-10 dB):60 Hz - 20 kHz Rotatable Coverage: 90° x 50° Axial Sensitivity1: 94 dB (1 W/1 m) Max.Calculated SPL1: 122 dB or more, Passive Power Handling: 200 W continuous, 800 W peak Impedance: 8 ohms (nominal), 6.0 ohms (min.) Makes: d&b/EV/Adamsons

Quantity4

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Dual 6" two-Way Speaker with a Frequency Range(-10dB):- 62Hz-20Khz & Long Term Power Handling of=150W (at Nominal Impedance of 8ohms). The Loudspeaker should have a Sensitivity(1W/1m) of 94dB with a Max. SPL of =118dB. It should have Built in LMT with Power Taps of 7.5/15/30W at70/100V Line. The Sound Dispersion should be 100x80 Degrees or better. The Speaker Should Come with OEM wall Mounting Bracket with a Sweep Range of upto 100Degrees.Makes: d&b/EV/Adamsons

Quantity1

Rate-

Amount -

Supply, Installation, Testing & Commissioning of 12" Two-way Powered Speaker with one 1" HF transducer with a Frequency Response(-3dB):- 65Hz-18KHz & In built class D Power amplifier of 1000 W or better. The Loudspeaker should have a Max. SPL of =126dB.The Sound Dispersion should be 90x60 Degress. The speaker should have both built in line level inputs & multiple DSP functions like delay.Makes: d&b/EV/Adamsons

Quantity2

Rate-

Amount -

Supply installation testing and commisioning of Dual channel Class AB/Class D power amplifier with inbuilt DSP, Max Midband Output Power =950W @ 8 Ω; =1800W @ 4 Ω & =3200W @ 2 Ω,Max Bridged Output Power=6000W @ 4 ohms,70 V & 100 V Operation,Frequency Response, ref. 1 KHz: 10Hz - 21 KHz (±1dB), THD:0.05%, Max input level = +21 dBu, input impedence:20 kΩ, Signal to Noise ratio = 109 dB, Crosstalk -80 dB with built in protection such as Audio Limiters,output delay per channel,31 band GEQ per channel,PEQ per channel, Power remote via switch,delay time selectable,floating relay contacts,inputs for presets selection. Makes : Adamsons/ d&b / Dynacord /

Quantity3

Rate-

Amount -

Supply installation testing and commisioning of Dual channel Class H/Class D power amplifier with inbuilt DSP, Max Midband Output Power =350W @ 8 Ω; =660W @ 4 Ω & =1100W @ 2 Ω,Max Bridged Output Power=2000W @ 4 ohms,70 V & 100 V Operation,Frequency Response, ref. 1 KHz: 10Hz - 21 KHz (±1dB), THD:0.05%, Max input level = +21 dBu, input impedence:20 kΩ, Signal to Noise ratio = 104 dB, Crosstalk -80 dB with built in protection such as Audio Limiters,output delay per channel,31 band GEQ per channel,PEQ per channel, Power remote via switch,delay time selectable,floating relay contacts,inputs for presets selection. Makes : Adamsons / d&b /Dynacord /

Quantity3

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Single Channel amplifier providing 70V/100V Rated Output Power (*Rated Load); THD1%, 1kHz; 270W ;Rated Output Power (*Rated Load) ;THD0.2%, 20Hz…20kHz ; 250W Slew Rate at 1kHz 41V/μs ;Frequency Response, (-1dB,). 1kHz 70Hz - 20kHz; Power Bandwidth THD=1%,Half Power : 45Hz - 20kHz;Input Impedance, 20Hz ... 20kHz, Balanced; 20kOhm; Signal-to-Noise Ratio, A-Weighted 101 dB. Makes: /Dynacord/Adamsons/d&b

Quantity1

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Digital Signal Processor with 2 x XLR IN, electronically balanced audio input,6 x XLR OUT, electronically balanced audio output with 2 x XLR Thru out ,and 1x XLR AES/EBU IN digital input,with Nominal Input Voltage:1.23V / +4 dBu, maximum output voltage:8.7V / +21 dBu,input impedence :10k Ohm,CMR:-80dB@1kHz,A/D &D/A coversion :24 bit sigma delta,THD+N 0.01% .Makes: d&b/EV/Adamsons

Quantity1

Rate-

Amount -

Supply, Installation, Testing & Commissioning of 22 channel Compact Mixing System (18 x Mic/Line + 4 x Mic/Stereo-Line), Auxiliarys (MON, FX, AUX) : 2 Pre, 2 Post, 2 Pre/Post switchable, Frequency Response, -3 dB, ref. 1 kHz : 15 Hz to 65 kHz, Crosstalk, 1 kHz Channel to Channel -80 dB, THD at 1 kHz 0.005%, CMRR MIC input 1 kHz 80 dB, Dual stereo 24/48-bit multi effects processors, 100 Factory + 20 User, Tap-Delay, Digital Audio Interface Channels : 4 In / 4 Out, AD/DA Conversion, Sampling Rate : 24-bit, 44.1 / 48 / 88.2 / 96 kHz.Makes: Midas,Dynacord,SSL

Quantity1

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Corded Vocal Microphone with ON/OFF switch with Dynamic neodymiun magnet based microphone element with frequency response of 80Hz-16kHz or better ,sensitivity of= 2.2 mV/Pa ,rated impedence of 600 ohm.Makes: Shure,EV(Bosch),Sennheiser

Quantity4

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Tight cardioid Condenser microphone with frequency response of 48Hz-15kHz or better ,Cardioid polar pattern,sensitivity of= 7.0 mV/Pa ,rated impedence of= 200 ohm Makes: Shure,EV(Bosch),Sennheiser

Quantity4

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Freestanding Gooseneck Mic with base for podium having dual condensor back electret microphone element ,Selectable Omnidirectional/ Cardioid/ Supercardioid/ Hyper Cardioid polar pattern,LED status display and with programmable button for Push to Talk or Push to Mute functions having ,frequency response 50Hz-20kHz ,sensitivity 5.5mV/Pa,clipping level 125dB SPL ,output impendence 200 ohm, Dynamic Range 100 dBShure,EV(Bosch),Altec lansing .

Quantity1

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity 1.0 µV,Receiver Image rejection55dB,Receiver Dyanmic range 95dB and receiver having 32 channels possible,Receiver S/N ratio 100dB A,distortion 1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz Makes: Shure,EV(Bosch),Sennheiser

Quantity2

Rate-

Amount -

Supply, Installation, Testing & Commissioning of 2 core 2.5 sq mm armored copper Speaker cable

Quantity2000

Rate-

Amount -

Supply, Installation, Testing & Commissioning of 3 core 1.5 sq mm armored copper Power cable

Quantity1000

Rate-

Amount -

Supply, Installation, Testing & Commissioning of 2 core 4 sq mm armored copper Speaker cable

Quantity400

Rate-

Amount -

Supply and installation of Microphone stand with base

Quantity1

Rate-

Amount -

Supply and Installation of Leads & Connectors such as XLR Socket / Connector/Phono Socket/ Speaker Socket/ Mounting Brackets etc... with Suitable Accessories.

Quantity1

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Audio Earthing

Quantity1

Rate-

Amount -

Supply, Installation, Testing & Commissioning of 7000 Lumens projector with fixed type mounting arrangement

Quantity1

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Motorised Projection screen size 15x18 feet with remote control

Quantity1

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Dolby digital processor with • Eight-Channel Digital Input (4 × AES/EBU) for Digital Cinema Server Includes support for Dolby Surround 7.1 • Two Digital Pair Inputs (1 × AES/EBU)Connects alternative content sources (for example, preshow server, satellite receiver) • Toslink™ Digital Input Connects alternative content sources that output optical digital audio • Eight-Channel Analog Input Connects existing film or alternative sound processor • USB Connector Enables easy system setup from a PC • Ethernet Connector Connects with Dolby Show Manager network and/or can be monitored, controlled, or upgraded anywhere on the network for glitch-free shows. Also supports ASCII commands or remote control of the processor using the CP750 setup application • Premium Surround Sound Supports 5.1 and Dolby Surround 7.1 sound

Quantity1

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Cable & connectors

Quantity1

Rate-

Amount -

HVAC WORK :-

Quantity-

Rate-

Amount -

CASSETTE TYPE UNITS Supplying, installing, testing and commissioning cassette type variable speed inverter technology split room airconditioning unit 2 TR capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 230/250 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A and copper condenser coil at position as per specification with provided copper piping and drainage pipe.

Quantity2

Rate-

Amount -

PROPELLER FAN Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. 225 mm dia

Quantity6

Rate-

Amount -

HVAC ELECTRICAL WORK Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Quantity15

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Quantity20

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Quantity50

Rate-

Amount -

Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB

Quantity2

Rate-

Amount -

Supplying, erecting & marking DPMCB 40A to 63A, Cseries (for motor/power) in provided distribution board as per specification No.SW-SWR/MCB

Quantity4

Rate-

Amount -

Quantity25

Rate-

Amount -

Supplying & erecting ISI mark Rigid Steel conduit 16 SWG 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No:WG-MA/CC,

Quantity35

Rate-

Amount -

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Quantity30

Rate-

Amount -

Supplying, erecting & terminating XLPE armoured cable 3 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Quantity45

Rate-

Amount -

AIR DISTRIBUTION Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction complete with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete.

Quantity13.5

Rate-

Amount -

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45 degree.

Quantity44.7

Rate-

Amount -

Supplying & erecting tile type modular diffuser made from aluminium sheet complete with powder coated matching to the ceiling shade for provided suuply and return air.

Quantity5

Rate-

Amount -

Providing and applying of accoustic insulation for air ducts with 25 mm thick, 48kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete.

Quantity60

Rate-

Amount -

Providing adhesive thermal insulation for supply / return air duct with 19 mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC-2007.

Quantity310

Rate-

Amount -

AIR DISTRIBUTION SHEET METAL DUCT: Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.63 mm sheet (24G)

Quantity573

Rate-

Amount -

Quantity1449

Rate-

Amount -

Quantity3170

Rate-

Amount -

Quantity380

Rate-

Amount -

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

Quantity5

Rate-

Amount -

Supplying, installing, testing and commissioning of Back Draft damper having 18 gauge G.I. frame and Blade in accordance with approved shop drawings and specifications complete as required.

Quantity13

Rate-

Amount -

Supplying, installing and testing of extruded aluminium Air louvers with bird screen in accordance with approved shop drawings and specifications complete as required.

Quantity30.3

Rate-

Amount -

HVAC EQUIPMENT AIR COOLED DUCTABLE SPLIT AC SITC of split type Ductable indoor unit and air cooled outdoor condensing units with scroll type compressor, condenser fan ,outer casing etc. Indoor unit consisting of centrifugal fan with motor ,dx cooling coil outer casing ,filter ,cotrol and power panel with remot control, MS stand for ODU shall be included. The unit has full charge of refregerant gas oil confirming to specifications. complete as required. Outdoor Air cooled condensing unit consisting of scroll type compressor , copper tube aluminium finned condenser coil, with suitable size low speed fan, all mounted in heavy gauge sheet steel enclosure with protective painting. Evaporating Unit consisting of copper tube aluminium finned high heat transfer cooling coil, refrigerant distributor and thermostatic expansion Valve along with blower and filters all in heavy gauge sheet steel metal enclosure with protective painting.etc as required 8.5 TR Ceiling suspended Ductable split units

Quantity1

Rate-

Amount -

Quantity3

Rate-

Amount -

REFRIGERANT PIPING Supply Installation, testing, commissioning and Interconnecting refrigerant copper pipe work with closed cell elastomeric nitrile rubber tubular insulation between indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with MS slotted angle, including cutting chases, hole in walls/slabs and making good the walls/slabs etc. all external piping shall run in covered cable tray item for cable tray shall be quote seperately. 9.53 mm dia 13mm thick insulation

Quantity25

Rate-

Amount -

Quantity40

Rate-

Amount -

Quantity10

Rate-

Amount -

Quantity15

Rate-

Amount -

Quantity40

Rate-

Amount -

DRAIN PIPING Providing and fixing of PVC drain pipe of 6 Kg /cm2 pressure rating complete with 6mm thick closed cell nitrile rubber insulation, fittings, supports, valves as per specifications & drawings. 32 mm dia

Quantity60

Rate-

Amount -

TUBE AXIAL FLOW FANS (Smoke exhaust) Supply, Installation, Testing & Commissioning of long casing(GSS) Tube Axial flow type fans complete with aluminium alloy blades with aerofoil design, bird screen, flexible connection & gravity louvers at outlet. Motor shall be of 415 + 10% volts, 50 Hz. Sound level at 3mt distance from fan outlet shall not be more than 90db(A) (Room Condition). Capacity shall be as follows & as per detailed technical specification: Fans should be AMCA certified 2 hour fire rated at 250 deg C. .” RPM Should Not exceed 1450. 31000 cfm capacity with 25 mm static pressure

Quantity8

Rate-

Amount -

TOILET VENTILATION INLINE FAN Supply, Installation, Testing and commissioning of Fresh/exhaust air fan suitable for Inline mounting comprising of forward curved centrifugal blower complete with induction motor metal clad MCB , canvas connection all compete as required, motor suitable for single phase, 230 volts, 50Hz AC. supply as per specifications of following capacities: Noiselevel should not exceed 65dB(A)at 3 meter in room condition. 900 cfm capacity with15 mm static pressure

Quantity2

Rate-

Amount -

Quantity12

Rate-

Amount -

Basement parking Exhaust fan Stater panel 100 A, TPN MCCB (25 KA) with adjustable O/L fix short circuit Metering: 0-500 Volts, digital Voltmeter with S/S and shall be protected by 2 Amps MCBs. 0-100 Amps digital Ammeter and 100/5A, 10VA, CL-1 CTs and selector switch. Phase indicating lamps and shall be protected by 2 Amps MCBs. Bus Bars: 150 Amps TPN Aluminium busbars, colour coded with heat shrinkable insulation sleeves. Outgoing: (2) Nos. 4Pole MPCB with SD starter with contactor, O/L relay with single phase preventor suitable for 15 KW Fan motor with ON/OFF/Trip indication lamps and push buttons, potential free contacts for remote operation in each feeder and Auto Manual Selector Switch as required including auxiliary contacts for smoke signal. One (1) Nos. 16 A TPN MCB as spare

Quantity4

Rate-

Amount -

ROYALITY CHARGES

Quantity-

Rate-

Amount -

ROYALITY CHARGES Metal

Quantity1594

Rate-

Amount -

ROYALITY CHARGES Sand

Quantity10650

Rate-

Amount -

ROYALITY CHARGES Murum

Quantity173

Rate-

Amount -

TESTING CHARGES

Quantity-

Rate-

Amount -

TESTING CHARGES Carrying out Mix design with all Tests on basic materials of concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.i) M-25 Grade

Quantity8

Rate-

Amount -

Carrying out Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness (BASIC TEST OF CEMENT) in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.

Quantity157

Rate-

Amount -

Carrying out test of crusher agreegate transported from various sources at site in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. i) Crushing value, ii) Impact value, iii) Specific gravity, iv) Water absorption

Quantity340

Rate-

Amount -

Sieve analysis

Quantity340

Rate-

Amount -

Abrasion Value

Quantity340

Rate-

Amount -

Flakiness Index & Elongation Index.

Quantity340

Rate-

Amount -

Carrying out test of sand transported from various sources at site in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. Fineness modules & Silt Content

Quantity10

Rate-

Amount -

Quantity10

Rate-

Amount -

Quantity10

Rate-

Amount -

Carrying out Standard of Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks) on Bricks in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.

Quantity16

Rate-

Amount -

Carrying out Standard test of water Absorption , Specific Gravity on Flooring stones (Natural Stone like Kota, Marble, Granite, Tandur etc.) in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.

Quantity10

Rate-

Amount -

Carrying out Standard test of Water Absorption, Modules of Rapture (Set of 6 Tiles) on CERAMIC TILES / VITRIFIED TILES in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete

Quantity5

Rate-

Amount -

Carrying out test of concrete casted at site in the form of cubes of 150x150x150mm size casted during conctering in the laboratory including conveying the cubes/material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. i) Compessive strength

Quantity394

Rate-

Amount -

Carrying out Standard test of Water Absorption, Compressive Strength (Set of 8 Boxes) on Concrete Paving Blocks in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete

Quantity5

Rate-

Amount -

Carrying out Standard test of Water Absorption, Crushing Value / Compressive Strength, Specific Gravity on Stones in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.

Quantity5

Rate-

Amount -

Carrying out test of PH Value, Sulphate & Chloride Content on Water in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.

Quantity5

Rate-

Amount -

Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. i) Weight / metre, ii) Ultimate tensile stess, iii) Yield stress, iv) Elongation Test, a) Upto 16mm dia.

Quantity27

Rate-

Amount -

Quantity26

Rate-

Amount -

Carrying out test for Density and Moisture Content on Teak wood in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.

Quantity5

Rate-

Amount -

Carrying out standard test of Adhesion, End immersion, Knife test on Flush Doors in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.

Quantity10

Rate-

Amount -

Carrying out standard test on Aluminium sections in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. Thickness, Mass per running meter

Quantity5

Rate-

Amount -

Quantity5

Rate-

Amount -

Carrying out standard Non Destructive Test at site or in the laboratory including conveying the material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. Rebound Hammer Test

Quantity10

Rate-

Amount -

Quantity10

Rate-

Amount -

673 More

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Nagpur Metropolitan Region Development Authority Tender

Nagpur Metropolitan Region Development Authority - NMRDA Tender

Costs

EMD

Document Cost

Tender Fee

Description

Contact

Tender Id

Bid Award Id

Tender No

Tender Authority

Purchaser Address

Website

BOQ Items

Potential Partner

TENDER BY COUNTRIES

United States Tenders|

United Kingdom Tenders|

Spain Tenders|

France Tenders|

Qatar Tenders|

Australia Tenders|

Canada Tenders|

China Tenders|

Malaysia Tenders|

Maldives Tenders|

Singapore Tenders|

Bangladesh Tenders|

Ethiopia Tenders|

Bhutan Tenders|

Kuwait Tenders|

Oman Tenders|

Germany Tenders|

Egypt Tenders|

Ghana Tenders|

Saudi Arabia Tenders

TENDER BY AUTHORITIES

Federal Road Agency Tenders|

Bangladesh Railway Tenders|

Area Metropolitana De Barcelona Tenders|

Jsc Russian Railways Tenders|

Kuwait Oil Company Tenders|

Civil Aviation Authority Tenders|

Food And Agriculture Org. Tenders|

Eskom Tenders|

Energy Regulation Commision Tenders|

Dept Of Defence Tenders

TENDER BY CATEGORIES

Agriculture Or Forestry Works Tenders|

Automobiles And Auto Parts Tenders|

Civil And Construction Tenders|

Consultancy Services Tenders|

Education And Training Services Tenders|

Electrical And Electronics Tenders|

Finance And Insurance Sectors Tenders|

Food Products Tenders|

Furnitures And Fixtures Tenders|

Healthcare And Medicine Tenders

TENDER BY PROCUREMENT

Goods Tenders|

Works Tenders|

Services Tenders

OFG MANUFACTURING BUSINESSES PRIVATE LIMITED

Head Office

Sales Office

COMPANY

About Us

Contact Us

Download Media Kit

POLICIES

Terms of Use

Privacy Policy

SUPPORT

Request Demo

MOBILE APPS