Nagpur Metropolitan Region Development Authority Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Nagpur Metropolitan Region Development Authority - NMRDA Tender
Civil And Construction
Building Construction
Electrical and Electronics
Electrical Works
Eprocure
Opening Date4 Mar 2024
Closing Date20 Mar 2024
Tender Amount₹ 27,93,77,713
Costs
EMD
₹ 13,97,000Document Cost
₹ 25,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NMRDA_1021002_2Bid Award Id
ViewTender No
E-TENDER NOTICE No. 29/ 2023-24Tender Authority
Nagpur Metropolitan Region Development Authority ViewPurchaser Address
-Website
http://http://www.nmrda.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042: 1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 - Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012) and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2 Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right embedment depth as per embedment mark and activated using AT Tool Module to ensure adequate torque as per manufacture’s torque tolerance published in ETA and same shall be documented and submitted to Project Manager at the time of inspection. Design of Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as per actual load data and site conditions as provided by structural consultant and the report to be submitted to the project manager and design engineer for approval. Scanning before drilling to be done with PS Scanning tool to avoid rebar hits. stud anchor HST3 SS M20x170 - SSR 2022-23 Item No. 53.23, Sr.No. 2128, Page No. 460, Bd C2 Page No. 275.
10
-
-
Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042: 1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 - Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012) and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2 Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right embedment depth as per embedment mark and activated using AT Tool Module to ensure adequate torque as per manufacture’s torque tolerance published in ETA and same shall be documented and submitted to Project Manager at the time of inspection. Design of Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as per actual load data and site conditions as provided by structural consultant and the report to be submitted to the project manager and design engineer for approval. Scanning before drilling to be done with PS Scanning tool to avoid rebar hits. stud anchor HST3 M24x200 30, SSR 2022-23 Item No. 53.24, Sr.No. 2129, Page No. 460, Bd C2 Page No. 275.
10
-
-
Suppling, Drilling/Cleaning hole and fixing make heavy duty ETA Approved Chemical Anchor of appropriate size and fixing plates subsequently. Anchor comprises of HVU-2 flexible foil capsule that contains styrene free Urethane Methacrylate resin, hardener, quartz, sand/corundum and HAS-U threaded rod of minimum 5.8 steel grade, galvanized to minimum 5 microns. Anchor should be approved for cracked concrete, seismic & diamond drill holes. Manufacture should submit Anchor Design report based on design loads & other parameters as provided by consultants. Chemical anchors should be designed in accordance with EOTA-TR-029 “guidelines for anchorage of chemical anchors for use in concrete” for approval. Application at site should be done as per manufacturer guidelines. Any report submittal with Installation pictures should be done using CFS-DM Software, which shall be charged extra. AnchorHVU2+ HAS U M12x110-90, SSR 2022-23 Item No. 53.27, Sr.No. 2132, Page No. 462, Bd C2 Page No. 275.
78
-
-
Suppling, Drilling/Cleaning hole and fixing make heavy duty ETA Approved Chemical Anchor of appropriate size and fixing plates subsequently. Anchor comprises of HVU-2 flexible foil capsule that contains styrene free Urethane Methacrylate resin, hardener, quartz, sand/corundum and HAS-U threaded rod of minimum 5.8 steel grade, galvanized to minimum 5 microns. Anchor should be approved for cracked concrete, seismic & diamond drill holes. Manufacture should submit Anchor Design report based on design loads & other parameters as provided by consultants. Chemical anchors should be designed in accordance with EOTA-TR-029 “guidelines for anchorage of chemical anchors for use in concrete” for approval. Application at site should be done as per manufacturer guidelines. Any report submittal with Installation pictures should be done using CFS-DM Software, which shall be charged extra. Anchor HVU2+ HAS U M16x125. SSR 2022-23 Item No. 53.28, Sr.No. 2133, Page No. 462, Bd C2 Page No. 275.
78
-
-
Suppling, Drilling/Cleaning hole and fixing make heavy duty ETA Approved Chemical Anchor of appropriate size and fixing plates subsequently. Anchor comprises of HVU-2 flexible foil capsule that contains styrene free Urethane Methacrylate resin, hardener, quartz, sand/corundum and HAS-U threaded rod of minimum 5.8 steel grade, galvanized to minimum 5 microns. Anchor should be approved for cracked concrete, seismic & diamond drill holes. Manufacture should submit Anchor Design report based on design loads & other parameters as provided by consultants. Chemical anchors should be designed in accordance with EOTA-TR-029 “guidelines for anchorage of chemical anchors for use in concrete” for approval. Application at site should be done as per manufacturer guidelines. Any report submittal with Installation pictures should be done using CFS-DM Software, which shall be charged extra. Anchor HVU2+ HAS U M20x170. SSR 2022-23 Item No. 53.29, Sr.No. 2134, Page No. 462, Bd C2 Page No. 275.
10
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) , SSR 2022-23 Item No. 25.33, Sr.No. 842, Page No. 180 Bd.F.5 Page No. 300 and B- 7,Page No 38. SECOND FLOOR
0.97
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 25.52, Sr.No.847, Page No. 181, Bd.F.6 Page No. 300 and B.7, Page No.38. SECOND FLOOR
6.08
-
-
Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. SECOND FLOOR
1.41
-
-
Design, Manufacture, Supply and Installation of STRUCTURAL GLAZING SYSTEM as per design intent and as per approved drawings, preparation of Shop Drawings, Supply, Fabricate, 8mm toughened high performance glass, erect the system at site as per approved shop drawing at all floor levels and for all heights. Designing, providing and fixing frame supporting system, the framing system to support glazing panels, to any shape and profile, smoke seal, flashing, including gaskets, sealents, necessary accessories as part of the system on a contineous framing supported between floors as detailed below and as per the specifications for structural glazing system. Design the framing Jindal 22835 section with 8mm toughened high performance glass as per design, as specified maintaining groove width shall not be more than 10mm both horizontal and verttical. Submission of methodology for the materilas and assembly and the same shall be got approved by the Employer / PMC prior to installation. Protection of the system and materials till handing over to the Employer / PMC, reomval of the unwanted materials, broken glass, screws, bolts, nuts, packing materials, debris etc regularly and keeping the premises neat and clean all the times. Co-ordinate the details of the Structural Glazing cleaning system during the preparation of the shop drawing and incorporate such details in the shop drawing submitted for approval of Employer / PMC. Design pre-assembled aluminium sections, Structurally glazed Panel with contineous framed panels system with spilt mullion to any shape and profiles shall be designes to with stand the design wind pressure as per relevant IS Code, and fixed at horizontally / vertically / sloped / curved position etc as shown in the approved drawings by using aluminium extrusions, Glass, Spacer tape, gasket, sealent etc. as specified. b) The toughened high performance glass shall be fixed as per specifications. Spacer for glazing panel shall be aluminium extruded profile and finished with C25 grade electrolytic color anodic coating as per approved color conforming to IS 1868 and filled with dry desiccant. Primary sealant shall be Poly-isobutylene (PIB) and Secondary seal shall be structural silicon sealant of DC 995 (one part) or DC 789 (two parts) of Dow corning or approved equivalent. c) System Supports : Providing and fixing the supporting system with Brackets / Clamps including fastening straps, nuts, bolts, rivets, washers etc. as per design requirement and as per approved shop drawing. Brackets / Clamps shall be of hot dip galvanized steel and fastening materials shall be Non - magnetic Stainless steel 300 series - 316 grade of Hilti make or approved equivalent. Galvanizing thickness shall be in accordance with IS 2629 and 4759. Providing and fixing serrated plates or serrated washer wherever required as per the system requirement and as shown in the approved shop drawing. Shim thickness beyond 20mm is not permitted. Shims shall be similar material, preferably with aluminium, not more than 20mm thick and if the variation is beyond 20 mm, the bracket shall be designed accordingly with fastener.
800
-
-
Design, Manufacture, Supply and Installation of MS FINS WITH PU PAINT as per design intent and as per approved drawings, preparation of Shop Drawings, Supply, Fabricate, erect the system at site as per approved shop drawing at all floor levels and for all heights. Designing, providing and fixing frame supporting system, the framing system to support 4mm thick MS Perforated sheet, to any shape and profile, flashing, including PU Paint, necessary accessories as part of the system on a contineous framing of RHS 60 X 120mm, supported between floors on the Main Framed Structure. Submission of methodology for the materilas and assembly and the same shall be got approved by the Employer / PMC prior to installation. Protection of the system and materials till handing over to the Employer / PMC, reomval of the unwanted materials, screws, bolts, nuts, packing materials, debris etc regularly and keeping the premises neat and clean all the times. Co-ordinate the details of the MS FINS cleaning system during the preparation of the shop drawing and incorporate such details in the shop drawing submitted for approval of Employer / PMC. Design. System Supports : Providing and fixing the supporting system with Brackets / Clamps including fastening straps, nuts, bolts, rivets, washers etc. as per design requirement and as per approved shop drawing. Brackets / Clamps shall be of hot dip galvanized steel and fastening materials shall be Non - magnetic Stainless steel 300 series - 316 grade of Hilti make or approved equivalent. Galvanizing thickness shall be in accordance with IS 2629 and 4759.
900
-
-
Providing and Fixing False Ceiling with eco-friendly light-weight Calcium Silicate Tiles of spintone surface texture Aerolite make or equivalent of size 595mm x 595mm having 15mm thick densified micro look edge and 100%humidity resistance incombustible as per BS 46 part IV and thermal conductivity 0.043 with o KC and NRC 0.50 placed in true horizontal level suspended grid of size 600mm x 600mm made from hot dipped GI steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42mmx14mm between main tee 600mm center- tocenter and secondary cross T of size 33x14x0.43mm thick of length 600mm long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200mmx600mm resting on periphery wall Profile wall section 19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of required length fixed to the ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I. adjustable rods with powder- coated/good quality G.I. level adjustment clips of 35x35x0.8mm spaced SSR Sr.No. 1178, Page No. 175, As directed by Engineer-In-Charge.
460
-
-
Providing and fixing in position Gypsum board False Ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. SSR Sr.No. 1189, Page No. 178, As directed by Engfineer-In-Charge.
600
-
-
Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. GROUND FLOOR
10
-
-
Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. GROUND FLOOR
200
-
-
Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. SECOND FLOOR
49.14
-
-
Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. GROUND FLOOR
100
-
-
Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. FIRST FLOOR
100
-
-
Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, As directed by Engineer-In-Charge. GROUND FLOOR
500
-
-
Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, As directed by Engineer-In-Charge. FIRST FLOOR
500
-
-
Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR Sr.No. 983, Page No. 155, as directed by Engineer-In-Charge. SECOND FLOOR
100
-
-
Providing and fixing machine cut mirror polished 18mm to 20mm thick Telephone black granite / Amba white / Cat bary brown / RBI red / Ocean brown Granite Stone Partitions with full moulding the edges etc. complete. Both side polish. SSR Sr. No. 1021, Page No. 158, Bd M35 B, Page No. 393. GROUND FLOOR
10
-
-
Providing and fixing machine cut mirror polished 18mm to 20mm thick Telephone black granite / Amba white / Cat bary brown / RBI red / Ocean brown Granite Stone Partitions with full moulding the edges etc. complete. Both side polish. SSR Sr. No. 1021, Page No. 158, Bd M35 B, Page No. 393. FIRST FLOOR
10
-
-
Providing and laying Vitrified mirror / Glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR Sr.No. 1026, Page No.159, Bd. M-12 page Number 385. GROUND FLOOR
100
-
-
Providing and laying Vitrified mirror / Glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR Sr.No. 1026, Page No.159, Bd. M-12 page Number 385. FIRST FLOOR
100
-
-
Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR Sr.No. 1027, Page No.159, Bd. M-12 page Number 385. GROUND FLOOR
200
-
-
Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR Sr.No. 1027, Page No.159, Bd. M-12 page Number 385. FIRST FLOOR
200
-
-
Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR Sr.No. 1028, Page No.159, Bd. M-12 page Number 385. GROUND FLOOR
50
-
-
Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR Sr.No. 1028, Page No.159, Bd. M-12 page Number 385. FIRST FLOOR
50
-
-
Providing and applying two coats of Exterior Weather Shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat,scaffolding if necessary, and watering the surface for two days etc complete.(With prior approval of S.E.) SSR Sr.No.1093, Page No.165,BDO As directed by Engineer Incharge
1000
-
-
Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge.
1500
-
-
Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195 mm size with pillar cock, C.P. Angulars top cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the out side face of the wall, having Telephonic Black/Colour Granite of 180 mm thick fixed on Black Kadappa Frame work, etc. Complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.35 Sr. No. 1651, Page No. 315, As directed by Engineer-In-Charge.
21
-
-
Providing and fixing Table Top White Wash Basin of size 120 x 635 x 405 mm rubber plugs and brass chain, with pillar cock, C.P. Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to the out side face of the wall. etc. complete as directed by Engineerin charge. SSR 2022-2023 Item No. 48.36, Sr. No. 1652, Page No. 315, As directed by Engineer-In-Charge.
2
-
-
Providing and fixing white European type Wall -Hung, of size 360 mm x 360 mm x 575 mm with flush valve of approved make including soil pipe, vent pipe up to out side face of wall, 100 mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc as directed by Engineer in charge. SSR 2022-2023 Item No. 48.30, Sr.No. 1646, Page No. 314, As directed by Engineer-In-Charge.
18
-
-
Providing and fixing white Opal series European type Wall-Hung, of size 400 mm x 370 mm x 575mm with approved make flush valve including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc as directed by Engineer in charge. SSR 2022-2023 Item No. 48.37, Sr. No. 1653, Page No. 315, As directed by Engineer-In-Charge.
2
-
-
Providing and fixing white glazed Urinal of size 710 x 460 x 300 mm with sensotronic concealed type flushing valve for urinal with complete kit having fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm dia meter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc complete. SSR 2022-2023 Item No. 48.43, Sr. No. 1659, Page No. 316, As directed by Engineer-In-Charge.
13
-
-
Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets / union nut etc. complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.27, Sr. No. 1644, Page No. 314, As diretced by Rengineer-In-Charge.
20
-
-
Providing and fixing Hands shower (health faucet) with 8 mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/unionnut etc. complete as directed by Engineer incharge. SSR 2021-2022 Item No. 48.29, Sr. No. 1629, Page No. 227, As directed by Engineer-In-Charge.
20
-
-
Providing and fixing 15 mm dia. Screw down Bib/ Stop Tap of brass including necessary socket union nut complete. SSR 2022-2023 Item No. 41.40, Sr. No. 1334, Page No.270, Bd V 8 Page No. 554.
20
-
-
Providing and fixing 20 mm dia. screw down Bib/ Stop Tap of brass including necessary socket union nut complete. SSR 2022-2023 Item No. 41.41, Sr. No. 1335, Page No. 270, Bd V 8 Page No. 554.
10
-
-
Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2 NOS) Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make.
2
-
-
Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
30
-
-
Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
30
-
-
Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
15
-
-
Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
15
-
-
Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
15
-
-
Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
15
-
-
Acoustic Isolation Treatment in Ceiling & Wall - Providing and Fixing Acoustic Isolation Panelling & Ceiling with 18 mm thick Bison Board GI Framing as per Manufacturers Specifications, including 1000/50 Polyester Fiber Wadding (Micron, Dupont, Starcomfort, Continuum, Techno, Noble or equivalent)fitted in G.I. Frame with Chicken Mesh (if required), GI Framework (Gyp Steel, Ultra or Equivalent) including scaffolding, Hangers, fastners, taping & filling joints of Board etc as per design drawings and Manufacturers Specifications
633.49
-
-
Acoustic Gypsum Ceiling - Providing and Fixing Acoustic Gypsum Ceiling (Make Saint Gobin, Lafarge, Boral or equivalent) with 12.5 mm thick Gypsum Board Fixed to GI Framing as per Manufacturers Specifications, including 1000/50 Polyester Fiber Wadding(Micron, Dupont, Starcomfort, Continuum, Techno, Noble or equivalent) fitted in G.I. Frame with Chicken Mesh (if required), GI Framework (Gyp Steel, Ultra or Equivalent) including scaffolding, Hangers, fastners, taping & filling joints of Board etc as per design drawings and Manufacturers Specifications including making Cove, patterns, grooves, Including one coat of Primer and 2 Coats of Acrylic Paint etc completed at any height / level, as directed by Engineer Incharge / Architect.
141.82
-
-
Acoustic Gypsum Perforated Ceiling - Providing and Fixing Acoustic Gypsum Perforated Ceiling with 12 mm thick Perforated Gypsum Board (Make Gyproc or equivalent) Fixed to GI Framing as per Manufacturers Specifications, including 1000/50 Polyester Fiber Wadding (Micron, Dupont, Starcomfort, Continuum, Techno, Noble or equivalent) with Black Tissue Paper on one sides fitted in G.I. Frame with Chicken Mesh (if required) ,GI Framework (Gyp Steel, Ultra or Equivalent) including Hangers, fastners, taping & filling joints of Board etc as per design drawings and Manufacturers Specifications including making Cove, patterns, grooves, Including one coat of Primer and 2 Coats of Acrylic Paint etc completed at any height / level, as directed by Engineer Incharge / Architect.
252.13
-
-
Woodwool Board Acoustic Paneling - Providing and Fixing Acoustic Panelling in 20 mmWoodwool Board (Himalyan Acoustics, Fibercrette, Anutone, Balaji or Equivalent) made of Wood Fibre cement composites 20 mm thick size 1200 X 600 or 595 X 595 mm, noise absorption NRC 0.95 to 1.00 as per ISO: 354-1985 and ASTM 423-90 a, Density 400-450 Kg/ m3, meets stringent Fire Ratings ASTM D- 876, weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60o Celcius(140o Farenhite) for 15 days= No deterioration.Tested as per EN 13168-2001 .Including 500/50 Polyester Fiber Wadding (Micron, Dupont, Starcomfort, Continuum, Techno, Noble or equivalent) , GI Framework (Gyp Steel, Ultra or Equivalent) with necessary GI Spaces for airgap upto 300 mm including scaffolding, Hangers, fastners, taping & filling joints of board if required etc as per design drawings and Manufacturers Specifications including making Cove, patterns, grooves, including Scaffolding, harware etc completed at any height / level, as directed by Engineer Incharge / Architect.
762
-
-
Fabric on WW Paneling - Providing and Fixing Fabric to Exisitng WW Board/ Plywood including fixing 12 mm FR Plywood Battens, Fire Retardent Fabric of approved shaed, fixed to Plywood Batten and PVC Grippers, Decron or Foam backing necessary Adhesive, scaffolding, hardware as per design specification / drawings and as directed by Engineer Incharge / Architect.
762
-
-
Decorative Panelling - Providing and Fixing Decorative Panelling in 25 mm MDF Router / CNC Cut fixed on GI Frame with backing of 1000/50 Polyester Fiber Wadding(Micron, Dupont, Starcomfort, Continuum, Techno, Noble or equivalent), fitted with Chicken Mesh (if required), GI Framework (Gyp Steel, Ultra or Equivalent) including scaffolding, etc as per design drawings
570.88
-
-
Stage Side & Back Wall Panelling - Providing and Fixing Acoustic Panelling in 20 mmWoodwool Board (Himalyan Acoustics, Fibercrette, Anutone, Balaji or Equivalent)made of Wood Fibre cement composites 20 mm thick size 1200 X 600 or 595 X 595 mm, noise absorption NRC 0.95 to 1.00 as per ISO: 354-1985 and ASTM 423-90 a, Density 400-450 Kg/ m3, meets stringent Fire Ratings ASTM D- 876, weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60o Celcius(140o Farenhite) for 15 days= No deterioration.Tested as per EN 13168-2001. Screw fixed to existing wall including scaffolding, filling joints of board if required etc as per design drawings and Manufacturers Specifications,WW Board shall be finished with Black FR Polypropelene non woven Fabric completed at any height / level, as directed by Engineer Incharge / Architect.
125.93
-
-
Wooden Skirting - Providing and Fixing Wooden Skirting 3" to 4" Band in FR Plywood 12 mm thick Plywood finished with 1 mm thick Approved Laminate, including adhesive, hardware, scaffolding etc as per design drawings (FR Plywood Make -Merino, Kenwood, Galaxy, Sonear, Associate or Equivalent)
(Laminate Make Sonear, Merino, Greenlam or Equivalent)
54.5
-
-
Screen Masking - Providing and Fixing Screen Masking in Perforated MDF 12 mm thick fixed on GI Framing, Finished with Polypoplene Fabric, including making openable shutter access to Audi Rack etc completed
79.44
-
-
Port Holes - Providing and Fixing Port Holes, Site fabricated soundproof, smoke stop ports (Actual port sizes to be measured as built at site). 300x 50 Sal wood window frame. 50x25 Sal wood shutter frame. 10mm Modi Float Clear Glass fitted in the frame with 6mm neoprene ‘U’ gaskets, rubber seal all around between window frame & shutter frame. 75mm heavy duty SS hinges, heavy duty SS tower bolts, SS handle, 3 coats of black matt finish melamine polish of approved shade to all faces of window & shutter frames. Complete for intended use in every respect as per design details / drawings
4
-
-
Acoustic Fire Rated Doors - Providing and Fixing Acoustic Fire Rated Door -STC 44 , 120 min Fire rated fire proof timber door with frame is certified by CBRI / other Govt. approved laboratory confirming to IS3614 PART II. a. The door frame profile is 175 x 75mm of triple rebate construction is made from 16 gauge prime steel sheets. b. The Door frame is suitably prepared, primed and finished with paint to match with door shutter. Frames are rigidly bolted at top jamb for direct installation at sit.d. The door frame is fixed by adequate number of anchor fasteners on vertical and top jamb. The timber fire door shutters are constructed out of sandwiched non combustible boards. Fully flush double skin door have treated hardwood bidding on all four edges. Shutters have no visible screws or fasteners on either face. The door construction is of proprietary design incorporating fire retardant, heat insulating material suitable for fire stability integrity and insulation rating for 120 minutes. Shutters have intumescent strip on three edges except the bottom. Shutters are fabricated with pre punched cut outs and reinforcements to receive ironmongery. two hours rated acoustic timber shutters are 75mm thick. Treated water proof ply of 6mm thickness encloses the entire door assembly on both faces. Shutters are faced with laminate. Including ironmongery items like door closures, locks, handles, panic exit devices, Drop Seal and Sound Seal etc completed as per specification. (For Masonry Opening size - 1850mm x 2400mm)
4
-
-
Acoustic Fire Rated Doors - Providing and Fixing Acoustic Fire Rated Door -STC 44 , 120 min Fire rated fire proof timber door with frame is certified by CBRI / other Govt. approved laboratory confirming to IS3614 PART II. a. The door frame profile is 175 x 75mm of triple rebate construction is made from 16 gauge prime steel sheets. b. The Door frame is suitably prepared, primed and finished with paint to match with door shutter. Frames are rigidly bolted at top jamb for direct installation at sit.d. The door frame is fixed by adequate number of anchor fasteners on vertical and top jamb. The timber fire door shutters are constructed out of sandwiched non combustible boards. Fully flush double skin door have treated hardwood bidding on all four edges. Shutters have no visible screws or fasteners on either face. The door construction is of proprietary design incorporating fire retardant, heat insulating material suitable for fire stability integrity and insulation rating for 120 minutes. Shutters have intumescent strip on three edges except the bottom. Shutters are fabricated with pre punched cut outs and reinforcements to receive ironmongery. two hours rated acoustic timber shutters are 75mm thick. Treated water proof ply of 6mm thickness encloses the entire door assembly on both faces. Shutters are faced with laminate. Including ironmongery items like door closures, locks, handles, panic exit devices, Drop Seal and Sound Seal etc completed as per specification. (For Masonry Opening size - 1500mm x 2400mm)
7
-
-
Platforms & Stage - Providing & Fixing Stage made in MS Frame and 2 layers of Bison Board including necessary base plates, anchor fasternes including Synthetic Enamel Paint to MS Sections / Fabrication with one coat of red oxide primer and 2 coats of Enamel Paint etc completed
40
-
-
Step Edge Protection - Providing and Fixing Edge Proctection Angle for Auditorium Steps in 100 x 100 x 2 mm Aluminium angle fixed with screws as diected by Engineer Incharge / Architect
36
-
-
Carpet - Providing and Fixing Polyproplene or Nylon Carpet, 800 GSM, Fire Retardent, including 6 mm underlay as per approved design. (Supplier AtoZ, Pride or equivalent)
617.51
-
-
Motion Seating System - Supply, Installation, Testing and Commissioning of Pneumatic operated Motion Seating System. One set of 4 seats, Luxury style with genuine leather and Fiber glass with Special effects ncluded on/in chair. The Chairs should have special efects including water spray, air spray and leg ticklers, Vibration, Leg sweep, push back, Right to Left movement, Front and back movement, Up and down movement 0 - 175mm, Vibration - 12Hz Right to Left - +/- 50mm. Seat Size - 31" x 21". The The special effects on the chairs shall work with solenoid valve mono-stable and shall be able to support maximum pressure of 10 bar, this pressure shall be controllable which can be regulated separately from movement system. The linrear potentiometer sensor shall work from 0 to 5 volts and should have capability to read five different spatial positions. Make: Shuqee / 4DX or equivalent.
28
-
-
SFX - Supply, Installation, Testing and Commissioning of Special effects in the 7D Cinema Hall, The 7D Cinema must have 8 special effects namely - Ndck blast, Leg Ticklers, Butt Poker, Face Air, Strobe Lighting, Smoke, Rain and Wind. Wind Machine should consist of blade diameter of 390mm, flow rate of 128Cum/min, and static pressure of 400Pa, Viltage 220V, frequency of 50Hz, power usage 1500w and speed of 2900rpm. Make of the blower used as special effects shall be star brand and shall have 2HP each.
8
-
-
Screw Compressor - Oil injected Screw Compresor with working pressure 10 bar g - 145 psi g and minimum working pressure 5 bar g - 72.5 psi g. Maximum power consumption neds to be 11kW - 15Hp and needs to have 4 reserve Air Tanks having a capacity of 500 litres each. The compressor shall be of ELGI / CHICAGO make.
4
-
-
Control Computers - Supply, Installation, Testing and Commissioning of Work station including Control Software, Intel Core i3 Processor, Nvidia Graphics, Monitor, Key board and Mouse with PLC (drive and synchronize susyem). The PLCs shall be able to work in low tension 24-volt dc. The PLCs shall have the capability to drive movement and multiple special effects. The PLC should be capable of reading linear sensor of position and drive of 16 different special effects.
3
-
-
Equipment Cabinet - The customised equipment cabinet: 32U, 19 inch Setver Rack with MS powder coated shelves with glass door and openable from 4 sides with equipmeny trays and 8. numbers of 5Amp plug points for power supply and top mounted exhaust fans for temperature control.
2
-
-
Projector - Supply, Installation, Testing and Commissioning of 20000 Lumens Projector with standard Lens of BenQ / Panasonic PT - RZ21K with LE6 / Barco HDX W20 Flex / Christie WU 20k-J or equivalent with onsite resizing of Media suitable to Projection Area.
1
-
-
Silver Screen - Supply, Installation, Testing and Commissioning of 2.4 Gain Premium Silver Perforated wrap around screen suitable for 3D steroscopic film as per required size and specifications with eyelets and with necessary fabrication structure. Make - Veron / Crystal or equivalent.
50.88
-
-
Sound Equipment - Supply, Installation, Testing and Commissioning of 5.1 Theatrical Surround Sound system - Pro Audio System, EV ELX-115, 112, 118P / JBL SRX 815, 812, 828 with AV Processor - Marantz SR 5013 and Amplifier - AMB - 600, AMB - 1200, AMB-1600, SRT-4200 / EV Q99, EV Q1212 / CROWN 900HD, 2400-N with 32U Rack along with onsite installation of Audio equipment and on site sound mixing. mke - JBL/ YAMAHA / EV or equivalent.
1
-
-
3-D Interface System - Supply, Installation, Testing and Commissioning of 3D modulator supporting DLP projection up to 32k lumens lamp power silver screen of 2.4 gain and active surface size of 171 x 116mm. Make - Volfoni / DepthQ / Expand or equivalent.
1
-
-
3-D Glasses - Supply of Anti scratch 3-D Passive Glasses black color, 0.297mm thick, TAC circular polarized 3D glasses with Optic specifications - 125nm, Transmittance 43.5%, polarized efficiency - 99.90%
280
-
-
Media Production - Stereoscopy Simulation - High Version: To create & provide media in LEFT & RIGHT format in Full HD 1920/1080, CG, VFX, Shooting, Compositing, and Post Production with Sound Dubbing. Shooting : Live + Chroma (Green screen) Shooting will be done, Editing, Special Effect - VFX with 3D modeling, Rigging and texturing with Compositing, Dubbing, Music & Background Score, 5.1 Surround Sound Mixing at Site, Special Effect Design, Programming and synchronizing with simulation equipment, Testing and Debugging complete.
16
-
-
Synchronize Media Server - To provide, install & commissioning of dedicated synchronizable (in Master Slave Configuration) Media Player unit capable of FULL HD 1920 x 1080 video playback- comprising of Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz, 2GB, LPDDR4-3200 SDRAM (depending on model), 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE, Gigabit Ethernet, 2 USB 3.0 ports; 2 USB 2.0 ports., 2 HDMI ports (up to 4kp60 supported, 2-lane MIPI DSI display port, 2-lane MIPI CSI camera port, 4-pole stereo audio and composite video port, H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode), OpenGL ES 3.1, Vulkan 1.0, Micro-SD card slot for loading operating system and data storage, Power over Ethernet (PoE) enabled (requires separate PoE HAT), Operating temperature: 0 – 50 degrees C ambient. Sync signal INPUT through Ethernet . Digital Inputs : 5 potential free contacts( 12 Volt Tolerant ), Digital Outputs : 5 ( To control external Relays with isolated ground), Operating System: Linux, Power Supply : 230VAC, 50 Hz, Power Consumption: 10 W. Make- GME/Alcon-McBright or equivalent
1
-
-
Onsite Integration - Desigining, Equipment Installation with Light Controls (Upto 60 Lights), Media Control (per Projection), Special Effect Control, Show Control, Accessories etc complete - To provide, install and program Show Director SX-0001 / TrueLive HD-933 / iLitStream DX – 2009 / QuickSense – DI2166 / QuickR – DO2216 Multi-protocol architectural lighting controller with DMX Interface Cinema Server with HD Playback GPIO Interface Module with RS 232 port, DMX-512 port supporting ethernet based protocols Show control unit with Time Code Master, Slave supporting UDP, TCP, OST and MIDI Protocols Show control unit with Time Code Master, Slave supporting UDP, TCP, OST and MIDI Protocols with onsite Installation of Integration Equipments. The Show Control Unit is a combination of above mentioned equipments as per Technical Requirements of particular Scene. As directed by Engineer-In-Charge.
1
-
-
Dome Theate Acoustic Works - Providing and Fixing Polyester Fiber Wadding 1000/150 (Micron, Dupont, Starcomfort, Continuum, Techno, Noble or equivalent) fixed parallel to Dome Screen with GI Frame, GI Wire or Chicken Mesh on both sides, Black FR Polyproplene Fabric fixed to Polyester Wadding with FR Plywood battens etc complete as directed by Engineer Incharge / Architect.
988.61
-
-
Floor Isolation Treatment - Providing and Fixing Floor Isolation Treatment with 15 mm thick High Density Rubber fixed with Adhesive to RCC Floor, 50 x 50 mm Hardwood Frame with Dry Sand Filling ,one layer of Plastic Sheet above and below Sand Filling, 2 Layers of 18 mm thick Bison Board etc complete as directed by Engineer Incharge / Architect. .
314
-
-
Woodwool Board Acoustic Paneling - Providing and Fixing Acoustic Panelling in 20 mmWoodwool Board (Himalyan Acoustics, Fibercrette, Anutone, Balaji or Equivalent) made of Wood Fibre cement composites 20 mm thick size 1200 X 600 or 595 X 595 mm, noise absorption NRC 0.95 to 1.00 as per ISO: 354-1985 and ASTM 423-90 a, Density 400-450 Kg/ m3, meets stringent Fire Ratings ASTM D- 876, weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60o Celcius(140o Farenhite) for 15 days= No deterioration.Tested as per EN 13168-2001 .Including 500/50 Polyester Fiber Wadding ((Micron, Dupont, Starcomfort, Continuum, Techno, Noble or equivalent)) , GI Framework (Gyp Steel, Ultra or Equivalent) with necessary GI Spaces for airgap upto 300 mm including scaffolding, Hangers, fastners, taping & filling joints of board if required etc as per design drawings and Manufacturers Specifications including making Cove, patterns, grooves, including Scaffolding, harware etc completed at any height / level, , as directed by Engineer Incharge / Architect.
131.71
-
-
Fabric on WW Paneling - Providing and Fixing Fabric to Exisitng WW Board/ Plywood including fixing 12 mm FR Plywood Battens, Fire Retardent Fabric of approved shaed, fixed to Plywood Batten and PVC Grippers, Decron or Foam backing necessary Adhesive, scaffolding, hardware as per design specification / drawings and as directed by Engineer Incharge / Architect.
131.71
-
-
Decorative Panelling - Providing and Fixing Decorative Panelling in 25 mm MDF Router / CNC Cut fixed on GI Frame with backing of 1000/50 Polyester Fiber Wadding(Micron, Dupont, Starcomfort, Continuum, Techno, Noble or equivalent), fitted with Chicken Mesh (if required), GI Framework (Gyp Steel, Ultra or Equivalent),MDF Panel Finished with Duco Paint including scaffolding, etc as per design drawings
87.84
-
-
Wooden Skirting - Providing and Fixing Wooden Skirting 3" to 4" Band in Flexible Plywood 12 mm thick Plywood finished with 1 mm thick Approved Laminate, including adhesive, hardware, scaffolding etc as per design drawings (Plywood Make -Merino, Kenwood, Galaxy, Sonear, Associate or Equivalent)
(Laminate Make Sonear, Merino, Greenlam or Equivalent)
192.08
-
-
Supply & Installation of LED Vide Wall Approx. 27.7 feet by 17 feet LED video wall with Pixel Matrix 2816 x 1728. 1 Data transmitting card. Multiple receiving and hub cards as per size of the screen. Software to Control the video wall remotely, divide in multiple regions. Resolution 2.5mm pixel pitch. 256 x 192 = 49152 pix/tile. LED type SMD 2020. LED life 100000 hours. Brightness 1200 nits(cd/m2) Viewing Angle 160x140. Number of tiles 99 to 105. Display area 43.79 square meters. Total physical LED's 48,66,048. Signal input -DVI. File formats - JPEG, MPEG, BMP, SWF, MP4, GIF, DAT. Supported network through LAN/WAN. Makes : Xtreme Kore, Nova Star, LG, Samsung, Sony or approved Equivalent
1
-
-
Supply & Installation of Media Player Server AMD thread Ripper or intel i7 based Server
1
-
-
Supply & Installaton of CPU & Display Monitor Intel NUC with Processor i5, RAM 8 GB and 1TB Hard disc, with Graphic Card with 15" Display Monitor
1
-
-
Supply and Installation of Audio System for LED Video Wall, with Main Speaker - Frequency Response 55Hz to 20kHz, Power frating -LF:500W AES, 200W Peak, HF: 80W AES, 450W Peak, sensitivity LF: 98 dB@1w/1m, HF: 113dB@ 1w/1m, Nominal Impendance LF: 8Ω, HF: 16Ω, including digital management system and including all required cables and connectors etc. comoplete.
1
-
-
Dome Structure - The dome structure shall be geodesic aluminum frame for the installation of a projection screen inside with suitable weight. Dome structure / Cyclorama shall be approx. 14m diameter with total floor space of approx 150 square meters. Dome shall be half spherical with a sturdy frame.
1
-
-
Dome Screen - The Dome projection screen shall be made from non-rusting polyester material with symmetrical half spherical shape. Projection screen seams shall be as less as possible and barely noticeable in order not to bother projection images. Screen colour shall be suitable for digital projection. Dark grey screen colour which supports the projection system to display the background of the night sky as dark as possible while still able to display other images and videos immersively. Screen shall be able to reflect the brightness of stars. Installation of screen shall be tilted to the ground level at 10 to 25 degrees designed to suit installation of projectors. Dome should comprise in-built system for preventing audiences to touch the screen or other projection equipment in the room
1
-
-
Projector - SITC of 10000 Lumens Projectors. 1-Chip DLP Projection system with Standard Lens of Panasonic /Benq/ Optoma or equivalent with onsite resizing of Media suitable to Projection area.
6
-
-
Sound Equipment - Theatrical 7.1 Surround Sound - Supply, Installation, Testing and Commissioning of Sound Equipment - Detailed Designing, planing, providing, fixing, positioning of 7.1 Surround Sound System – Pro Audio System, EV ELX-115, 112, 118P/ JBL SRX 815,812,828 with AV Processor-Marantz SR 5013 and Amplifier-AMB-600, AMB-1200, AMB-1600, SRT-4200/ EV Q99, EV Q1212/ CROWN 900HD, 2400-N with 32 U Rack alongwith Onsite Installation of audio equipment and On Site Sound Mixing. Make - JBL / YAMAHA / BOSE or equivalent.
1
-
-
Media Production - Full HD 1920 X 1200 - Duration 10 Minutes each. Media Production Stereoscopy Simulation - High Version: To create & provide media in LEFT & RIGHT format in Full HD 1920/1080, CG, VFX, Shooting, Compositing, and Post Production with Sound Dubbing. Shooting : Live + Chroma (Green screen) Shooting will be done, Editing, Special Effect - VFX with 3D modeling, Rigging and texturing with Compositing, Dubbing, Music & Background Score, 5.1 Surround Sound Mixing at Site, Special Effect Design, Programming and synchronizing with simulation equipment, Testing and Debugging complete.
6
-
-
Synchronize Media Player - To provide, install & commissioning of dedicated synchronizable (in Master Slave Configuration) Media Player unit capable of FULL HD 1920 x 1080 video playback- comprising of Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz, 2GB, LPDDR4-3200 SDRAM (depending on model), 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE, Gigabit Ethernet, 2 USB 3.0 ports; 2 USB 2.0 ports., 2 HDMI ports (up to 4kp60 supported, 2-lane MIPI DSI display port, 2-lane MIPI CSI camera port, 4-pole stereo audio and composite video port, H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode), OpenGL ES 3.1, Vulkan 1.0, Micro-SD card slot for loading operating system and data storage, Power over Ethernet (PoE) enabled (requires separate PoE HAT), Operating temperature: 0 – 50 degrees C ambient. Sync signal INPUT through Ethernet . Digital Inputs : 5 potential free contacts( 12 Volt Tolerant ), Digital Outputs : 5 ( To control external Relays with isolated ground), Operating System: Linux, Power Supply : 230VAC, 50 Hz, Power Consumption: 10 W. Make- GME/Alcon-McBright or equivalent
6
-
-
Show Control - To provide, install & commissioning of show control unit - SPD2101 with capability of synchronizing muliple devices. Precision sync with SMPTE standard including Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz, 2GB, LPDDR4-3200 SDRAM (depending on model, 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE Gigabit Ethernet, 2 USB 3.0 ports; 2 USB 2.0 ports, 2 HDMI ports (up to 4kp60 supported), 2-lane MIPI DSI display port, 2-lane MIPI CSI camera port, 4-pole stereo audio and composite video port, H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode), OpenGL ES 3.1, Vulkan 1.0, Micro-SD card slot for loading operating system and data storage, Power over Ethernet (PoE) enabled (requires separate PoE HAT), Operating temperature: 0 – 50 degrees C ambient. Custom built dedicated hardware & software device, easy to use with out board control panel. Sync signal through Ethernet to control all slave units . Digital Inputs : 5 Potential free contacts (To control Start Stop of Show), Digital Outputs : 5 ( To control external Relays with isolated ground) , Operating System: Linux, Power Supply : 230VAC, 50 Hz, Power Consumption: 10 W, Mechanical Dimensions: 2 U 19 inch Rack.
2
-
-
Onsite Integration - Desigining, Equipment Installation with Light Controls (Upto 60 Lights), Media Control (per Projection), Special Effect Control, Show Control, Accessories etc complete - To provide, install and program Show Director SX-0001 / TrueLive HD-933 / iLitStream DX – 2009 / QuickSense – DI2166 / QuickR – DO2216 Multi-protocol architectural lighting controller with DMX Interface Cinema Server with HD Playback GPIO Interface Module with RS 232 port, DMX-512 port supporting ethernet based protocols Show control unit with Time Code Master, Slave supporting UDP, TCP, OST and MIDI Protocols Show control unit with Time Code Master, Slave supporting UDP, TCP, OST and MIDI Protocols with onsite Installation of Integration Equipments. The Show Control Unit is a combination of above mentioned equipments as per Technical Requirements of particular Scene. As directed by Engineer-In-Charge.
1
-
-
Supplying and erecting 10 numbers Virtual Reality Headsets – Head mounted device that provides virtual reality for the wearer. Used for games, simulations and training. Headset should enable 360-degree room scale VR allowing user to walk around and explore virtual world. Adjustable headset and multiple eye relief adjustments, including lens distance and IPD. Including all required cables and connectors etc. Complete.
20
-
-
Supplying and erecting Virtual Reality Sensors and Controllers , Base Station. These are motion sensing devices that capture the position of the VR headset wearer and provide the right experience based on position. Sensors form the base stations for creating the VR environment. Should fit the standard mounting points. Base Station powers the presence and immersion of room-scale virtual reality by helping the VR headset and controllers track their exact locations. The Base Station features wireless syncing and comes with a power adapter. Standard VR Controllers lets users wirelessly interact and play with the virtual world. Features minimum 24 sensors, multi-function trackpad, dual-stage trigger, HD haptic feedback and a rechargeable battery. Including all required cables and connectors etc. Complete.
20
-
-
Supplying and Erecting Virtual Reality Monitors, 32 inch Display Monitors that provides a visual aide to the bystander, guide or the trainer of what is being watched by the VR Headset Wearer. Make - Samsung, Dell, AOC. Including all required cables and connectors etc. Complete.
20
-
-
Supplying and Erecting Virtual Reality Computers (customised) - High configuration CPU's used for VR with high end graphics cards. AMD Ryen 5 2600 Gigabyte B450 M Motherboard, 16 GB (8 GB X 2 DDR4 Memory), 250 GB WD SSD, 100/1000 Giga LAN, Cooler 311 Chassis with 650W Cosair SMPS, Nvidia GTX 1060 6 GB DDR 5 Rams Graphics, Logitech Keyboard and Mouse. Including all required cables and connectors etc. Complete.
4
-
-
Metal Frame Grid with Charging Device installed on the top in each VR Room
4
-
-
Development of Virtual Reality Android Application specifically for hasslefree Plaback of VR content in VR devices
4
-
-
Testing, Commissioning and Calibration of VR System.
4
-
-
Concept Theme & Graphics - Design and Built Concept based Interior Look & Feel of the Virtual Reality Room based on the content and theme developed, the scope shall include Graphic / Theme Based Painting on Wall, Vinyl Graphics on Wall & Ceiling, Cladding to create realistic look and feel of the room to Gel with the Content of VR. The scope of work shall include creative artistic work and exclude civil hard finishes for interior finising . Design shall be approved by Engineer Incharge before execution
4
-
-
Supply, Installation,Testing and Commissioning of Active LED Screen - Size - 100.8 x 28.5Ft - Brightness -5500 cd/m2, LED Make - Kinglight, Viewing Angle - H -120(+60/-60), Viewing Angle - V - 120(+60/-60), Cabinet Weight (Kg) -45, Cabinet Size (WxHxD) in mm - 960x1152x135, IC Driver- Chipone, Cabinet Material- Iron, Operating Temparature (*C) - -40 to +60 Degree, Pixel Configuration (R,G,B) - SMD 3 in 1, Pixel Pitch - P6, Module Size(mm)- 192x192, Pixel Matrix per module (dot)- 32x32, Pixel Matrix per Cabinet (dot) - 160x160, Pixel per Sq.mt.(dot)- 27777, Min. View Distance(mtr)- 6, Grey Scale (Level)- 32768, Refresh Frequency(Hz) - 480, Driving Mode- 1/8 Dynamic, Input Power Frequency(V) - 110-240, Power Consumtion per sq.m. (Max/Avg. in W)- 680/240W, Life Tiime @ 50% Brightness (Hrs) - 100,000, Operating System - 8/9/10, Certifications-CCC, RoHS, CE, FCC, IC, UL, CB, Inputs & Outputs - 2 types of pluggable input cards, user configurable − Input card 1 (Max connector capacity: 8K@60Hz) - 4x 12G-SDI+1x HDMI 2.1+1x DP 1.4 − Input card 2 (Max connector capacity: 4K@60Hz), 4x 12G-SDI+4x HDMI 2.0, Input mosaic, 12G-SDI and HDMI 2.0 support input mosaic, 12-bit, 10-bit and 8-bit video inputs, 3 types of outputs − 16x 5Gbps Ethernet ports, 2x 40Gbps optical ports, 1x SPDIF digital audio port, 3 types of controls -1x Genlock signal input (with loop through)/2x Ethernet control ports/ 1x Auxiliary port, Image scaling Support 2 image scaling modes: custom and pixel to pixel, Color Replacement, 14Ch Color Correction, Support adjustment to the image RGBW mapping curvesSupport adjustment to the image RGBW mapping curves, The 17×17×17 3D LUT .cube files are supported to adjust the video source colors, Dynamic Booster, Full Grey Scale Calibration, Support HDR10 and comply with the SMPTE ST 2084 and SMPTE ST 2086 standards. − Support HLG, Support low latency and the controller load capacity is not reduced, No rectangle restriction for irregular screens, The controller can be adaptive to various video input frame rates, including decimal frame rates, Custom frame rates are also supported and the step size of fine tuning frame rate is as small as 0.01 Hz, Two working modes, Display system monitoring, 5.5" Touch LCD, VMP software control, Cascading control via Ethernet. Including Transportation, Loading, Unloading, all lead and lifts. The LED Wall shall be installed on the provided support structure.
1
-
-
SITC Of Outdoor Speakers - JBL or equivalent, Frequency Range (-10dB)74 Hz – 20 kHz, Frequency, Response (+/-3 dB)-120 Hz – 15 kHz, Power Rating-60 W Continuous, Program (2 hrs) 30 W (120 W Peak), Continuous Pink Noise (2 hrs),20 W (80 W Peak), Continuous Pink Noise (100 hrs), Sensitivity84 dB (43 Hz - 110 Hz), Maximum SPL, 103 dB peak (95 dB continuous, 2 hr) @ 1m, Coverage Pattern, 90° conical, Nominal Impedance-8 Ω (at 8Ω tap) Transformer Taps70V: 15 W, 7.5 W, 3.75 W, 100V: 15 W, 7.5W, Drivers-83 mm (3 in) woofer, polypropylene cone 25 mm (1 in) voice coil on KaptonTM voice coil former, 20 mm (0.8 in) titanium dome, Neodymium magnet assembly, KaptonTM voice coil former, TerminalsBare wire with dielectric-gel-filled wire nuts (1 meter single jacked cable 2 wires with 18 AWG), Enclosure Material-Polycarbonate + ABS, UL94V-0 flammability rated, Dimensions-Cabinet 132 mm diameter x 167 mm deep (5.2 x 6.6 in). Assembly height 289 mm (11.4 in) with L-bracket base (at 90°) and 430 (17.0 in) with ground stake base, Net Weight-1.7 kg (3.8 lbs), Included Accessories(1) Ground Stake Bracket; (1) L-Bracket, Directivity Factor (Q)7.9, Directivity Index (dB)9 dB
106
-
-
SITC Of DSP- BSS BLU806M-EK
16 I/O Chassis Based configurable Signal Processor with BLU link and DanteTM / AES67 /EN 54-16 Compliant for Life Safety Applications
1
-
-
SITC Of DSP Input Card - BSSBLUCARDIN-M 4 Channel Mic / Line Level Input Card
1
-
-
SITC Of DSP Output Card - BSSBLUCARDOUT-M 4 Channel Line Level Output Card
2
-
-
SITC Of Digital Power Amplifier - Crown NCDI4X600BL-U-IN CDi Series, Network Based Digital DriveCore Multichannel Power Amplifier with 4 x 600W; built-in DSP and BLULink,
1
-
-
SITC Of Digital Power Amplifier - Crown NCDI4X12BL-U-IN CDi Series, Network Based Digital DriveCore Multichannel Power Amplifier with 4 x 1200W; built-in DSP and BLULink
2
-
-
SITC Of Chassis Based DSP - Hybrid Card- BSSBLUHYBRIDIN-M. Telephone Hybrid Card, integration for PSTN/ Analog PBX telephone network
1
-
-
SITC Of Digital Signal Processor - I/O Expander - BSSBLU-BIB-M- EU. 8 Channel Input Audio Expander (Break-In-Box), Compatible with all BLULink DSPs (EU)
1
-
-
SITC of Paging Microphone - 6000H51030
1
-
-
SITC Of Digital Power Amplifier - Crown DCI8I300N DCi Series, Network Based Multichannel Digital Power Amplifier with 8 x 300W; built-in DSP and BLULink
1
-
-
SITC Of 2.5 Sq.Mm Armoured Speaker Cable
5000
-
-
SITC Of Speaker Junction Box
155
-
-
SITC Of Control Room Junction Box
1
-
-
SITC Of Control Room Interconnect Cable & Connectors
1
-
-
SITC Of 32U Rack
1
-
-
SITC Of Design, Cable Termination, Installation, Programming, Testing, Comissioning, Training Charges
1
-
-
Supplying erecting testing and commissioning Fabricated panel TRC PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 400A TPN MCCB as Incommer & 11 nos of 63A TPN MCB +300A TPN MCCB 1 nos + 100A TPN MCCB 3 nos + 32A TPN MCB 2 nos as outgoing refer SLD Panel complying to design as per IS 61439 (Part 1)
(Refer : Annexure Sheet D) (Non CSR)
1
-
-
Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
(CSR No - 5-3-10)
49
-
-
Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
(CSR No - 5-3-2)
137
-
-
Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
(CSR No - 5-3-11)
9
-
-
Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave with backup time of 0.5 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all
protections as per specification no. AP-UPS
( CSR 3-7-5)
1
-
-
Supplying, erecting, testing and commissioning of 20kVA capacity online pure sine wave, with backup time of 0.5 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input and 3 phase output complete with all protections as per specification no. AP-UPS
(CSR No - 3-7-8 ( New))
2
-
-
Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete
(CSR No - 3-8-11)
42
-
-
Supplying and erecting integrated LED Highbay Fitting 135W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min. 20000 Lumens, min.
efficacy of 145 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.90, operating range of 140-240V, inbuilt surge protection of 4kV, Life class of 50,000
Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2
HL - Highbay Light
(CSR No - 2-6-3)
22
-
-
Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproof and dustproof industrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens , min. efficacy of 120 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., Ripple5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50 , IP20 rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC Block/wooden board with 3 years warranty.
(CSR No - 2-2-1) Tube light
26
-
-
Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting
arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
(CSR No - 2-1-6)
69
-
-
Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of
110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of
2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
(CSR No - 2-1-4)
45
-
-
Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110
lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
(CSR No - 2-1-5)
135
-
-
Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI80, CCT upto 6000K, Beam Angle of 110 deg., Ripple5%, THD10%, p.f. 0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty
(CSR- 2-1-16)
12
-
-
Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., THD10%, p.f.
0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.
Bulkhead light (CSR- 2-1-15)
6
-
-
Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI80, CCT
upto 6500K, Beam Angle of 120 deg., Ripple5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.
Staircase light (CSR- 2-1-17)
20
-
-
Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG_0002_PW/SW. (Avg. Length 15 Mtr.)
(CSR NO- 1-7-12) ( Primary light point)
160
-
-
Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG PW/CW
(CSR NO- 1-7-22)
195
-
-
Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG_0002_PW/CW
(CSR NO- 1-7-26)
10
-
-
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR NO- 1-1-9)
267
-
-
Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
(CSR NO- 1-1-11)
528
-
-
Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
(CSR No - 1-3-2)
500
-
-
Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
(CSR No - 1-3-2) 1/2
450
-
-
Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
(CSR No - 1-3-3) 1/2
300
-
-
Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete
(CSR No - 1-6-1)
24
-
-
Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.
(CSR No - 1-6-2)
4
-
-
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete
(CSR No - 1-6-10)
14
-
-
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
(CSR No - 1-6-11)
60
-
-
Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected.
(CSR No - 1-6-28)
10
-
-
Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.
(CSR No - 1-6-30)
12
-
-
SITC of Exit Signages with 1 x 3 W LED. with Single / double sided & hanging arrangement. With Battery Backup. Exit Signages: A range of large exit signs for 32m, 48m or 60m viewing distances with Lithium-Ion (LIION) battery technology. Designed for ceiling installations. Electronics designed to lengthen the life of the battery, minimizing maintenance costs, as well as an environmentally friendly battery Complete as required.
(NON CSR)
14
-
-
Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.
(CSR no - 7-11-6)
204
-
-
Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware.
(CSR no - 7-11-7)
204
-
-
Providing & Fixing in position, MS fabrication work using angles, sqr tubes, c channels etc for various partition frame as per Design & Instructions & Complete in all aspects . including all materials labour,finishing etc complete
(SSR No : 51.16 (Civil)) (For Cable tray support)
51
-
-
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
(CSR no - 7-1-23)
86
-
-
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
(CSR no - 7-1-15)
230
-
-
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
(CSR no - 7-2-31)
494
-
-
Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC
(CSR NO 1-10-1)
300
-
-
Supplying and installing cat-6 cable with rodent proof and anti termite jacket suitable for networking as per specification No. WG-COC/NC
(CSR NO -1-10-6)
450
-
-
Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP
(CSR.NO 1-12-4)
2
-
-
Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO
(CSR.NO 1-12-2)
43
-
-
Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected.
(CSR.NO 1-6-28)
43
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background
(CSR.NO 1-6-35)
43
-
-
Supplying and fixing 1 m length, UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-D in position as per specification No. WG-COC/PC
(CSR.NO 1-10-17 (New))
43
-
-
Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC
(CSR.NO 1-10-19)
43
-
-
Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete
(CSR.NO 1-9-26 + Note 1 X 4 Time)
1
-
-
Supplying, erecting & commissioning MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW
(CSR.NO 1-9-1)
1
-
-
Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW
(CSR.NO 1-8-1)
50
-
-
Supplying & erecting rosette box RJ type Bakelite box on wall with LED indication duly connected as per specification no. WG-TW
(CSR.NO 1-9-20)
5
-
-
Supplying & erecting 0.5 mm dia, copper jumper wire as per specification No. WG-TW
(CSR.NO 1-8-17)
20
-
-
Supplying, installing, testing & commissioning IP telephone instrument as per specification complete.
(CSR.NO 1-8-30)
4
-
-
Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete
(CSR.NO 1-9-30)
4
-
-
Supplying and erecting broadband splitter unit with 1 input & 2 output RJ 11 female connectors complete
(CSR.NO 1-9-21)
4
-
-
Supplying, fixing, and configuring 24 ports + 4 (SFP+) port, Managed Layer 2, POE Switch of , 370W, 6KV surge protection on ethernet port and console port for management erected in provided rack complete.
(CSR.NO 1-11-10(New))
3
-
-
Supplying, fixing, and configuring modularised multi-service router 802.11/a/n/ac unified Wave 2.5 GHz, with RJ-45 port, supporting 1 to 13 channels for 2.4 GHz, with unified wireless access point complete. (CSR.NO 1-11-18)
1
-
-
Supplying and fixing POE adaptor to provide DC supply to ethernet devices as per specification No. WG-NAS/PEA
(CSR.NO 1-12-15)
3
-
-
Supplying and erecting 25m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.
(CSR.NO 1-8-26)
2
-
-
Supplying and fixing 42 U floor mount server rack (Dimension-DxWxH – 800x1000x2070 mm) as per specification No. WG-NAS/RAK
(CSR NO:1-12-29)
1
-
-
Supplying, fixing, and configuring min. 580 watt redundant power supply system erected in provided rack complete.
(CSR NO:1-11-14)
1
-
-
SITC of 4 MP Full HD IP Dome /Bullet Camera Image Sensor 1/3" 4 megapixel progressivescan CMOS Effective Pixels 2304 (H) × 1296 (V) Electronic Shutter Speed Auto/Manual 1-1/100000 s Min. Illumination 0.5 lux F2.1 (Color); 0 lux (IR LEDs on IR Distance - nUp to 100 ft (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation - BLC/HLC/DWDR White Balance - Auto/Manual Gain Control - Auto/Manual Noise Reduction - 3D Privacy Masking- Up to 4 areas Lens verifocal Length- 2.8 -12 mm Horizontal Angle of View 92° 86°-28 Compression H.265 (Main/High/Baseline Profile) /MJPEG Resolution 3 MP (2304×1296) 1080p Main Stream 4 MP ,30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens with in built mike ,320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -NON VIF Profile S CGI Max. User Access 20 users Mobile App - for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C); 10% to 100% RH condensing Ingress Protection IP66 Vandal Resistance - IK10 Regulatory FCC Part 15B Class B (3 years warranty)
(Non CSR)
43
-
-
Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.
(CSR.NO 1-12-1)
80
-
-
SITC of 8 TB (7200 RPM) Surveillance hard disk 8 TB storage capacity with SATA support 6GB/s NCQ 64 MB cache 3.5 inches, 3 years warranty
(Non CSR)
1
-
-
SITC of all in one Type Core i5 Family Processor Spec 2.3 GHz Ram 8 GB Memory Technology DDR4 Computer Memory Type GDDR4 Hard Drive Size 1 TB Hard Disk Description HDD hard Drive Interface Serial ATA SSD 256 GE Additional Graphics Coprocessor Intel UHD Graphics 630 Graphics Chipsel Standing Screen display Size 21.5 Inches Connectivity Type Bluetooth Wireless Type Bluetooth 801.11ac. Hardware Platform Windows Operating System Windows 10 Professional Warranty - 3 years
(NON-CSR)
1
-
-
SITC of Full HD commercial LED TV DISPLAY-Screen Size 55-inch Aspect Ratio 16:9 Backlight Scanning 100Hz Resolution 1920 x 1080 pixels Viewing Angle178°/178° TERMINAL- VIDEO IN RCA X 1 AUDIO IN (L/R) RCA Pin Type X 2 HDMI IN HDMI 1.4 X 3 USB Input USB 2.0 X 2 RS232C Yes HDMI CEC Yes VGA IN Yes PC AUDIO IN Yes (1) (Share with AC)
(NON-CSR)
2
-
-
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR.NO 1-1-9)
450
-
-
Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit
(CSR.NO 1-2-2)
86
-
-
Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 55kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP (1Nos Hydrant Pump and 1 Nos Sprinkler Pump)
(CSR No : 13-1-5)
1
-
-
Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 9.3 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP
(CSR No : 13-2-2)
1
-
-
Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable Kw capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP
(CSR No : 13-3-2)
2
-
-
Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine, exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP
(CSR No : 13-4-2)
1
-
-
Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA/PT
(CSR No : 13-8-1)
1
-
-
Supplying, erecting, testing & commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etc. complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories, wiring & cabling along with allied accessories with following incoming and outgoings, suitable for automatic & manual operation on 415V, 3 phase, 50Hz ac supply as per specifications the capacity of electric motor driven pump are as followsa. Main fire pump(MFP) having capacity of 22 kW 1 no (1 working)b. Jockey pump(JP) capacity of suitable capacity 2 nos (1 working +1 standby, alternate run per start in auto mode)comprises of the following features & switchgears: 1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating.
2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU's, starters & outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etc.
3. Individual pump TPN SFU having rotary handle with HRC fuses of suitable rating.
4. Digital voltmeter & ammeter & RYB indicating lamps & push buttons & SPP, O/L & phase reversal protection with emergency stop switch. 5. TPN B204SPD 100kA Type 1 +2 tested.
6. Required pressure transducer with pressure indication on panel with cabling required for monitoring & automatic operation of fire pumps.
7. System controller to control operation of main electric fire pump, jockey (pressurization) pumps in sequence with interlocking for operation of pumps as per specification with automatic/manual operation with selector switch & alternate run of standby Pumps consisting of relays, timers. sensors, annunciation window for fault indication, complete as per specification.
8. Suitable capacity electric motor starters for all individual pumps with necessary push buttons & indications.
9. Siren of required capacity to be activated when main pump starts & allied accessories as per requirements of local CFO or as directed by engineer in charge.
10. Danger board as per IS.
11. Spare HRC fuses minimum 2nos of each individual rating with required bakelite fuse holder for main & jockey fire pumps MFP=(1working), JP = (1working+1standby, alternate run per start in auto mode) complete panel, as per specification no. FF-MFP/ECP
(CSR No : 13-5-1)
1
-
-
For addition of capacity of main electric motor driven fire pump MFP (1 working) for hydrant system is more than 22 kW, add as follows in the basic cost of Item no 13-5-1 towards increased capacity switchgears and motor starters for main & jockey pumps along with necessary accessories for main & jockey fire
pumps MFP=(1working), JP = (1working + 1standby, alternate run per start in auto mode) For main electric motor driven fire hydrant system pump of 55kW capacity &
relevant capacity jockey pump add Rs…
(CSR No : 13-5-1) (A-4)
1
-
-
For addition of fire sprinkler system to basic fire hydrant system control panel(FCP) which includes one main electric motor driven fire pump MFP (1working) having __kW capacity & relevant capacity jockey pumps, add as follows in the basic cost of Item no 13-5-1 towards increased capacity
switchgears busbar and additional motor starters for main & jockey pumps along with necessary accessories with software & hardware for main & jockey fire pumps additional Sprinkler system MFP=(1working)@22kW, JP = (1working+1standby, alternate run per start in auto mode) @relevant capacity For main electric motor driven fire sprinkler system pump of 55kW capacity (1Working) & relevant capacity jockey pumps (1working+1standby, alternate run
per start in auto mode, add Rs….
(CSR No : 13-5-1 : B-5) (for 1 nos Sprikler Pump )
1
-
-
For standby main electric motor driven fire hydrant/sprinkler system pump (MFP- 1 standby), add as follows in the basic cost of Item no 13-5-1 towards required switchgears and motor starter along with necessary accessories and updation of control logic with interlocking for operation of pumps
MFP=(1working+1standby, alternate run per start in auto mode)
JP = (1working+1standby, alternate run per start in auto mode) for main & jockey
fire pumpsFor standby main electric driven fire hydrant/sprinkler system pump of 55kW
capacity, add Rs…....
(CSR No : 13-5-1 : c-5)
1
-
-
For addition of standby main diesel engine driven fire pump (1 standby), add as follows in the basic cost of Item no 13-5-1 towards required 12/24 v battery charger and diesel engine starter along with necessary accessories, indicators etc. with necessary interlocking and updation of control logic with interlocking for operation of pumps MFP for main (1working+1standby mode) & jockey fire pumps (1working+1standby, alternate run per start in auto mode) , add Rs....... The control for diesel engine comprises of automatic/manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode indicating lamp for high/ low Lub. oil pressure, high water temp and engine on indication battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC voltmeter, and 0-20 A DC ammeter with all standard relays and accessories required for automatic operation of diesel engine with interlocking for operation of main fire pumps.
(CSR No : 13-5-1 : D)
1
-
-
For addition of booster pump for fire hydrant/sprinkler, add as follows in the basic cost of item no 13-5-1 towards necessary accessories, indicators etc. with necessary interlocking and updation of control logic, add Rs.......
for 11kW centrifugal type booster pump 1no(1working) , add Rs…....
(CSR No : 13-5-1 : E-2)
2
-
-
Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP
(CSR No : 13-6-2)
184
-
-
Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP
(CSR No : 13-6-3)
490
-
-
Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP
(CSR No : 13-6-5)
350
-
-
Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP
(CSR No : 13-6-5)
158
-
-
Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP
(CSR No : 13-6-7)
200
-
-
Providing coating of bitumen paint & 4 mm thick wrapping for underground 150 mm ring main of fire fighting system.
(CSR No : 13-6-10)
300
-
-
Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc.
complete.
(CSR No 7-6-7)
150
-
-
Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS
(CSR No : 13-7-5) ( For Jockey Pump)
2
-
-
Supplying and erecting 200 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, screen of SS end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS
(CSR No : 13-7-8) ( For main, Diesel, Hydrant Pump)
4
-
-
Supplying and erecting 150 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV
(CSR No : 13-7-15) (2 nos each for Booster Pump)
4
-
-
Supplying and erecting 200 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV
(CSR No : 13-7-16) (2 nos each For main, Diesel, Hydrant Pump)
8
-
-
Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
(CSR No : 13-7-17)
8
-
-
Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
(CSR No : 13-7-19)
4
-
-
Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV
(CSR No : 13-7-23) ( For Jockey Pump)
2
-
-
Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV
(CSR No : 13-7-25) ( For Booster Pump)
2
-
-
Supplying and erecting 200 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV
(CSR No : 13-7-26) ( For main Diesel, 2 nos Hydrant Pump + 1 nos Sprinkler)
5
-
-
Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV
(CSR No : 13-7-34)
10
-
-
Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV (CSR No : 13-8-2) (in Staircase )
6
-
-
Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL
(CSR No : 13-8-4)
6
-
-
Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF-FFA/NZ
(CSR No : 13-8-7)
13
-
-
Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC
(CSR No : 13-8-10)
1
-
-
Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
(CSR No : 13-8-13)
12
-
-
Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG
(CSR No : 13-8-14)
2
-
-
Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS
(CSR No : 13-8-15)
1
-
-
Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP
(CSR No : 13-8-16)
13
-
-
Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)
(CSR No : 13-8-18)
13
-
-
Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)
(CSR No : 13-8-19)
110
-
-
Supplying and erecting 20 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV
(CSR No : 13-7-31)
200
-
-
Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV
(CSR No : 13-7-32)
20
-
-
SITC Expansion Bellows (ISI marked) (Antivibration Rubber bellows )of half circular flanges on both end with tie rod fitting , ISI marked tested to 12 kg/ sq. cm pressure. Rate quoted shall include for supply and providing with companion, flanges, necessary gaskets, H.D.G.nuts-bolts & washers for 80 NB (NON CSR) ( For Jockey Pump)
4
-
-
SITC Expansion Bellows (ISI marked) (Antivibration Rubber bellows) of half circular flanges on both end with tie rod fitting , ISI marked tested to 12 kg/ sq. cm pressure. Rate quoted shall include for supply and providing with companion, flanges, necessary gaskets, H.D.G.nuts-bolts & washers for 150NB (NON CSR) ( For Booster Pump)
4
-
-
SITC Expansion Bellows (ISI marked) (Antivibration Rubber bellows) of half circular flanges on both end with tie rod fitting , ISI marked tested to 12 kg/ sq. cm pressure. Rate quoted shall include for supply and providing with companion, flanges, necessary gaskets, H.D.G.nuts-bolts & washers for 250 NB (NON CSR) (Suction & discharge side - ( For main Diesel, 2 nos Hydrant Pump + 1 nos Sprinkler)
8
-
-
Supplying & erecting Water level controller 230/415 V, A.C.Four way under ground & Over head tank operation only
(CSR No : 12-4-15)
1
-
-
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
(CSR No : 7-2-27)
100
-
-
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
(CSR No : 7-2-24)
120
-
-
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
(CSR No : 7-2-31)
150
-
-
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU
(CSR No : 13-9-10)
100
-
-
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP.
(CSR No : 9-2-8)
354
-
-
Supplying, installing, testing and commissioning FR, XLPE armoured cable 12 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU
(CSR No : 13-9-13)
(from local panel of Diesel pump to Main Panel)
100
-
-
Supplying and erecting ABC powder type fire extinguisher as per IS : 13849/15683 of 1 kg capacity with necessary clamp for erection on wall. (CSR No : 10-2-35(Old))
20
-
-
Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.
(CSR No : 13-15-1)
1
-
-
SITC Florescent type ( should glow in darkness)Indication stickers(As Per IS:9457 for Safety colour and Safety, size of 6cm x 15 cm IS:12349 for Fire Protection Safety Signs, IS:12407 for Graphics symbols for Fire Protection Plan.) like DANGER, NO SMOKING, EXIT, FIRE ESCAPE, EXSTINGUSHERS, HYDRANT, ARROWHEAD DIRECTION ,PUMP NAME on panel and PRESSURE SWITCH NO. ,HYDRANT POST BOX ,etc.to be provided. Also board " DO AND DONT" to be provided in various relevant location. The letter size as specify in the tender.
(NON CSR)
10
-
-
Supply, erection of Florescent type ( should glow in darkness) emergency telephone numbers like "police", "fire brigade", hospital", "doctors", & "responsible persons of the office", should be displayed in security cabin, reception area. The letter size as specify in the tender & the size is 50 cm x 30 cm
(NON CSR)
3
-
-
Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
(CSR No : 6-1-19)
150
-
-
Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (CSR No : 16-3-5) (for pumps + Extrenal Hydrant Pipe).
115
-
-
Supplying, erecting, testing and commissioning vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track )synchronised switches 7) serviceable without draining pipes.
(CSR No : 13-12-3)
1
-
-
SITC of Control Valve with turbine type automatic Alarm Gong to be connected with control valve, drain & test valve and all other necessary components as per manufacturer's specifications complete as required. The Valve must be UL Listed Size: 200NB
(NON CSR)
2
-
-
SITC of sprinkler flexible hose FM Approved stainless steel corrugated flexible pipe (hose) for dropping sprinklers below false ceiling ,pipe shall be 16 bar pressure 25 mm Dia with including all fittings like couplings bends, tees, Clamps, flanges. Gaskets, including cutting, welding / flanged joints necessary washers, nuts, bolts, L- brackets or S- brackets , rachets plates in case of falce ceiling , supprting arrangement above false ceiling with all other required accessories to be connected with header branch/sub branch and sprinkler unit for following pipe sizes. Assembly length 1500 mm (1 by 1/2)
(NON CSR)
298
-
-
SITC The Rosette Plate shall be fabricated by M.S.plate of 2mm thick and the finish shall be powder coated and color shall be as approved by architects /clients.
(NON CSR)
8
-
-
Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 1 loop capacity and capable of supporting upto 250 devices and detectors per
loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity,
interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP
(CSR No : 13-10-1 (New))
1
-
-
Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FFAFAS/SD .
(CSR No : 13-10-6 (New))
57
-
-
Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI
(CSR NO:13-9-9)
57
-
-
SITC of Power Supply
SITC of Power Supply or SMPS Output 24V - 3 Amp. with IP 65 Enclosures etc. Rate shall be including with required support system. key features as followed: - Universal input: -220-230 v AC; Overcurrent/overvoltage protection; Voltage adjustment +10% Spring-up crew terminal, IP20; DIN rail or panel surface mount
(NON CSR)
1
-
-
Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass
plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP.
(CSR NO:13-10-9 (New))
19
-
-
Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected.
(CSR NO:1-6-27)
19
-
-
Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH. (CSR NO:13-10-13 (New))
19
-
-
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU
(CSR NO:13-9-10)
300
-
-
Supplying, installing, testing and commissioning FR, XLPE armoured cable 4 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU (from Pressure switches to Main Panel)
(CSR NO:13-9-11)
300
-
-
SITC of Network Controller SITC of EN-54 Certified IP based EVAC PA controller capable of 12 zones in the system and expandable upto 400 zones with 14x 4 Audio matrix with full DSP functionality. 8 audio inputs, 4 audio outputs, 4 channel output matrix. Shall support the following: single line switching or redundant group A/B switching, amplifier redundany, 4 x 100V audio inputs and 12 speaker line outputs. Fault, warning and event conditions log. Built in message manager for 100 emergency/business calls up to 85 minutes. 10 control inputs and 13 control outputs. Impedance measurement and Pilot Tone supervision for speaker line monitoring. The controllers shall be able to exchange audio signals over the network without the need of a running PC/server, software dependent solutions shall not be accepted.The network controllers will be integrated using an interface module which is able to send and receive Dante audio to and from other Controllers.Frequency response (ref. 1 kHz) 20 Hz to 20 kHz (-0.5 dB), Signal-to-noise ratio (A-weighted): Line in to line out: 106 dB typical, THD+N 0.05%, Crosstalk (line level) Line in to line out (0 dB gain): 100 dB at 1 kHz, Sample rate 48 kHz, DSP processing resolution 24-bit linear A/D and D/A conversion, 48-bit processing. The omneo interface unit is able to send and receive Dante audio to and from other PA Controllers with the transmission of up to 16 digital audio input signals and 16 digital audio output channels with low latency shall be possible.Ethernet connectors (Primary /Secondary)100/1000 Mbit/s, RJ-45,integrated transformer isolationSampling rate 48 kHz. Data format 24 Bit. Audio channels Up to 16 ✕ 16 at 48 kHz, Audio flows Up to 16 ✕ 16 simultaneous audio streams,Latency across network 5 ms (typically). Multiple controllers should communicate over IP without need of running PC/Server. Graphics User Interface software should be considered for Monitoring and control of signal. Make and Model: - Equivalent to PVA-4CR12 + OM-1
(NON-CSR)
1
-
-
SITC of Router SITC of EN54 Certified EVAC Router for adding 24 zones in the system and to route 4 channels into 8 100V audio inputs to 24 loudspeaker line outputs. 2-in-6 matrix. 20 Control Inputs, 26 Control Outputs. Shall support single line switching or redundant group A/B switching, amplifier redundancy. Impedance measurement and Pilot Tone supervision for speaker line monitoring. Make and Model: - Equivalent to Bosch PVA-4R24
(NON-CSR)
1
-
-
SITC of Call station The Digital call station shall be an EN54-16 certified user interface. It shall be designed in a modern and robust chassis with a graphical display. As standard, the call station shall have a gooseneck microphone with pop shield and permanent monitoring, an illuminated LC-display and an integrated loudspeaker to be used for system sounds It shall be possible to modify the call station to suit the user’s requirements by connecting up to five remote call station extensions, each with 20 free customizable functions and selection buttons. The Call station shall have a built-in numerical keypad; it shall be possible to enable or disable the keypad during configuration • Five menu/function keys (pre-programmed) – four buttons shall provide each 1 LED (two LED’s shall be 2 green and 2 LED’s shall be yellow). • Green led on the microphone which is active during a call • 15 function and speed dial buttons (customizable), two LEDs (green/red) per button. • Button functions shall be programmable such as: • Zone select, source select, level control, emergency on/off, message on/off, failure acknowledge/reset. • switching output trigger on/off or 0 to 10V, select scheduled events, scheduled event on/off. • CAT5 cable for data and audio connection to controller (can bus, up to 1000 meter). Make and Model: - Equivalent to Bosch PVA-15CST
(NON-CSR)
1
-
-
SITC of Class-D Amplifier 2X 500 W
SITC of EN-54 certified 2x 500W Class D, high efficiency amplifier. 70/100V loudspeaker output voltages, galvanically separated, 4 automatic selectable audio inputs on RJ45, local input. THD ≤1%. Frequency response, ref. 1 kHz, rated load, -3 dB : 50 Hz to 25 kHz. Signal-to-noise ratio (A-weighted) 104 dB, Output noise (A-weighted) -62 dBu, Crosstalk , ref. 1 kHz -85 dB. Audio input level limiter, RMS output power limiter, high temperature, DC, short circuit, mains undervoltage protection, DC supply undervoltage protection, inrush current limiter, ground fault Make and Model: - Equivalent to Bosch PVA-2P500
(NON-CSR)
1
-
-
SITC of 15 W Horn Speakers -15 W high‑efficiency ABS horn loudspeaker with weather protection IP65
- Max. Power: 22.5 W,Rated Power: 15 Watts, Power tapping: 15/7.5/3.75W
- Effective frequency range(-10 dB) :(500 Hz to 5KHz)
- SPL at rated power (1Khz) 115 dB
- Self extingguishing acc. to UL94 V0
- IP65 acc. to IEC 60529, Safety acc. to EN60065 Make and Model: - Equivalent to Bosch LBC3470/00
(NON-CSR)
4
-
-
SITC of Full Metal grille ceiling speaker
6W ceiling mount speaker with excellent speech & music reproduction
- Max Power: 9W,Rated Power: 6Watts, Power Tapping: 6/3/1.5W
- Effective frequency range(-10 dB) : 150 Hz to 15KHz
- SPL at rated power (1Khz at 1 m) 108 dB
- Opening Angle 1 KHz / 4 KHz:: 180° / 45° Make and Model: - Equivalent to Bosch LBD0606/10
(NON-CSR)
43
-
-
SITC of Volume control units 12W Power : 12 W (max) Attenuation Steps : 5 x 3 dB + off; Frequency Response : 50 Hz to 20 kHz; Current Consumption : 20 mA @ 24 V DC; Connection : Screw terminals; Color : White (RAL 9010); Mounting : U40; Rate shall be Inculding all other required accesCSRies such as a back box, faceplate etc. and complete as per guideline & site condition. Make and Model: - Equivalent to Bosch LBC1400/10
(NON-CSR)
1
-
-
SITC of Wireless Handheld Microphones Power Source - Batteries 2 x LR6 / AA / UM3 1.5 V; Channels - 57 channels in steps of 125 kHz ; Response - 50 Hz ~ 15 kHz Rate shall be Inculding all other required accesCSRies and complete as per guideline & site condition. (NON-CSR) )
1
-
-
SITC of Wireless Belt-pack Transmitters Batteries - Batteries 2 x LR6 / AA / UM3 1.5 V; Channels - 57 channels in steps of 125 kHz; Response - 50 Hz ~ 15 kHz Rate shall be Inculding all other required accesCSRies and complete as per guideline & site condition. (NON-CSR)
1
-
-
SITC of Wireless Microphone Receivers Power Source - 12V to 18 V, 500 mA; Channels - 57 channels in steps of 125 kHz; Antenna - xx ; Connector - BNC ; Rate shall be Inculding all other required accesCSRies and complete as per guideline & site condition. ( (NON-CSR) )
1
-
-
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
(CSR NO: - 7-2-8)
338
-
-
SITC of Vertical Air Termination Solid Aluminium with base- 16 mm dia and 1000 mm long. Air Terminal Base should be tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol Supply of Special standing seam fixureClamp for Air terminal on Metal Structure -Site specific
(NON CSR)
1
-
-
SITC of Vertical Air Termination Solid Aluminium with dia 16 mm, for LPS suitable for firm routing on wall / parapet/ roof or sheet/calzip tested by accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 (NON CSR)
22
-
-
SITC of Cross splicer should be tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol 10 Dia Stainless steel Air termination- 3 Mtrs Long with 2 nos SS Clamp Suitable for side mounting on wall
(NON CSR)
15
-
-
SITC of concrete block for fixing/Mounting Vertical Air Termination / Mast on RCC Floor with special concrete compound Quick and easy mounting of interception rod
using anchor.
(NON CSR)
1
-
-
SITc of 8 mm dia solid Aluminium Conductor tested as per IEC 62561- 2 conducted in the Govt. aggregated thirty party laboratory to meet the requirement of IS / IEC 62305
(NON CSR)
180
-
-
SITC of Standing Seam clamp :To hold 8 mm Al conductor at every 1m dist on the top roof without any drilling on roof , Installation can be made through simple fastening system ,mainly used for seaming sheet roof application tested as per IEC-62561-2 for conditioning & Ageing test & conducted in the Govt. accredited Third party laboratory to meet the requirements of IS/IEC 62305
(NON CSR)
90
-
-
SITC of Special fixure Clamp for conductor on Metal Structure roof/wall-Site specific
(NON CSR)
50
-
-
Making cement concrete foundation including excavation ( 100x100x50 ) mm deep in 1:3:6 cement concrete,Duly plastered, with necessary curing and finishing
complete.
(NON CSR)
1
-
-
SITC of Expansion Piece without connector to compensate the expansion and contraction of Solid Round Al. Conductor during temperature variations to be provided on conductors length over 20 meters to connect Solid Round Al. Conductor at both ends to meet the requirements of IS/IEC 62305.
(NON CSR)
20
-
-
SITC of Al. Straight Splicers for 8mm and 10 mm Conductor to meet the requirement of IS IEC 62305 tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol
(NON CSR)
1
-
-
SITC universal parapet conductor holder, MOC - Polyamide/Nylon suitable for 8 to 10 mm dia conductor, Used for solid round AI air terminal on Parapet/Concrete wall, fixed using screws as per IS/IEC 62305 Length 100- 150 mm
(NON CSR)
10
-
-
SITC Each down-conductor should be provided with a test link in order to disconnect the earth termination system for enabling measurements. SS Test Link To connect Round to Flat conductor.
(NON CSR)
6
-
-
SITC of 25 X 6 mm GI strip from AL Conductor to the earth pit station and further the same strip shall be used for interconnecting all the earth pits below ground leve Zinc coating: 500 g/m square (Approx :70 micron coating) Should be tested and use exclusively for lightning protection ,earthing system and ring equipotential bonding
(NON CSR)
200
-
-
SITC Earth Electrode Cu Bonded Steel Rod 14.2mm dia x 3000mm-(250Microns) Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height). 14.2 / OD SS Clamp Both Side OEM Safe carbon based backfill compound - 50 Pounds
(NON CSR)
2
-
-
SITC of Electric Traction Passenger cum Stretcher/Hospital Lift with
· Rated capacity :- 20 Passenger/1360Kg
· Floors :- G+1 floor (2 Stops/2 Landings)
· Travel :- 3 to 4.2 mtrs
· Location of Lift Machine:- MR/MRL
· Rated speed :- 1.0mps VS · Car/Landing door clear opening of 1100/1200 mm wide x 2000 mm high Lift shaft available having clear size of 1500 mm wide x 1800 mm deep, 1500 mm Pit depth, 3000 mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory) · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Liftcar, LMR & FCC/ground floor. LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, bchange direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class.· ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.
(CSR NO - 17-1-10)
2
-
-
For Lift having 1100mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete
(CSR No - Add on - A6)
2
-
-
Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR NO - 5-3-13)
8
-
-
Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
(CSR NO -5-3-7)
12
-
-
Supplying, fixing and commissioning 2 pole, RCBO 6 / 10 / 16 / 20 / 25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO (CSR NO -5-6-9)
6
-
-
Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO (CSR NO -5-6-13)
8
-
-
Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/ FP MCB / RCCB / RCBO complete erected on angle iron/GI frame. (CSR NO -5-4-13)
4
-
-
Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (CSR NO -6-1-19)
30
-
-
Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. (CSR NO -1-6-1)
4
-
-
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete (CSR NO -1-6-10)
4
-
-
Supplying and erecting Ceiling rose / Batten holder / Slanting holder /hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box. (CSR NO -1-5-7)
4
-
-
Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected. (CSR NO -1-6-29)
10
-
-
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO -7-2-31)
45
-
-
Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP (CSR NO -9-1-2)
2
-
-
Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete. (CSR NO -9-2-4)
17.5
-
-
Supplying, erecting, testing and commissioning of 20HP, VRF/VRV air
conditioning system outdoor unit (ODU) complies type-IV OEM
standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control
panel with scroll compressor, air cooled copper condenser coil of suitable shape or increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.
(CSR No - 3-11-8)
6
-
-
Supplying, erecting, testing and commissioning of 7HP to 8HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control
panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.
(CSR No - 3-11-2)
2
-
-
Supply, installation, testing and commissioning of VRV / VRF based floor mount type package, room/indoor unit (IDU) having nominal cooling capacity of 10.0TR (4000 cfm) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, corded remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for
coastal area with decorative slim dimension suitable floor mounting arrangement, an electronic control console and any additional refrigerant and oil charge as per requirement during installation complete.
(CSR No - 3-11-49)
4
-
-
Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 4.1TR (1218 cfm) to 5.0TR (1624 cfm)of suitable cfm having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless
remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.
(CSR No - 3-11-24)
6
-
-
Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz,
AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.
(CSR No - 3-11-22)
8
-
-
Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for
coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.
(CSR No - 3-11-20)
8
-
-
Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete. (CSR-3-2-27)
15
-
-
supplying and installation of high pressure grade required size copper connection Y or T -joints / refnet for liquid and suction line complete erected on wall / ceiling with supports/ raceways, nitrile rubber insulation, painting etc. with brazing and testing for leakage confirming the normal operation of the VRV/VRF air conditioning system (CSR-3-11-86)
68
-
-
Supplying, erecting, testing and commissioning centralised programmable remote control panel (HMI) touch manager controls minimum 16 system of minimum 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having minimum 200 mm size colour LCD touch panel, yearly scheduled, power proportional distribution function, temperature limitation, history function complete erected on wall with an arrangements to integrate with provided fire alarm system. CSR - 3-11-79
1
-
-
supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. CSR 3-11-97[
320
-
-
supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. CSR 3-11-96
140
-
-
supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. CSR 3-11-95
50
-
-
Carrying out core cutting of size 3'' to 5'' dia x 15'' length in the c.c./rock/stone wall with help of specialized core cutting machine in proper manner and finishing the site as original. (CSR No. 3-11-77)
5
-
-
Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware. (CSR No. 7-11-1)
50
-
-
Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware. (CSR No.7-11-3)
50
-
-
Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware in approved manner. (CSR No. 7-11-11)
50
-
-
Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware in approved manner. (CSR No. 7-11-13)
50
-
-
Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV. (CSR No. 1-3-15)
150
-
-
Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. (CSR No. 1-2-4)
80
-
-
Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. (CSR No.2-10-15)
5
-
-
Supplying and erecting iron sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (CSR No. 6-1-19)
300
-
-
Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters.
750 CFM (Exhaust Air Fan)
1
-
-
Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters.
500 CFM (Fresh Air Fan)
1
-
-
Supply, Installation, Testing & Commissioning of Underdeck Roof insulation with 19 mm thick Nitrile rubber insulation with Aluminium foil on one side.
2500
-
-
Supply, Installation, Testing & Commissioning of Aluminium powder coated Non Vision Type Louvers.
15
-
-
Supply & Top of Additional Refrigerant R410A for VRV / VRF System as per Manufacturer requirement.
140
-
-
Supply,Installation,Testing & Commissioning of All side Flanged Grille made out Extruded Aluminium duly powder coated of following size: Grille: 600 x 600
10
-
-
Supply, Installation, Testing & Commissioning of hi capacity drain pumps for Hiwall units.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements