Municipal Council Tender

Reconnaissance Survey of a road alignment for new hilly road utilising exsisting forest cart tracks with use of ghat tracer (if found necessary), taking three dimensions of apexes including verification of type of land etc. complete. (Without Chaining)

Reconnaissance Survey of road alignment for new hilly road utilising exsisting forest cart tracks with use of ghat tracer (if found necessary), taking three dimensions of apexes including verification of type of land etc. complete. (With Chaining

Detailed survey of road length where earthwork is partly done including chaining and levelling with cross sections at every two chains inclusive of closing survey each day.

Providing detailed layout plan of area in scale 1:500 including carrying out contour survey and detailed Engineering plane table Survey with the help of 24 Alidade. The dolomite area measurement of the plot and structures, trees, over head line and under ground service amenities within the area, with triangular method and giving detailes of the structures, such as total area, type of building and distance from all corners taking trial pit 0.5x0.5x2.00 m.- 2Nos. per acre and collection of record from city survey / D.I.L.R. authorities and authentication. The plan shall be traced on 75 micron polyster film and shall be submitted along with three Amonia prints. The contour levels shall be marked at 0.5 Meter intervals. Note:- The items includes- 1)Traversing work with theodolite and steel tape. 2) Levelling Grid Work of the terrain. 3)Detailed Engineering Survey and contouring work of the terrain. 4)Plotting work. 5)Collection of Record. a) up to 1 Acr

Reconnaisance survey including study of sheets, maps etc. for alignment including 3 dimension of apexes, fixing pegs, chain and compass or cross staff survey with L-Section and cross section of alignment at every 30 m or at every change of deviation whichever is less including fly levels at closing of day, fixing apex and B.M. stones of size 0.20*0.20*0.75 m in 1:2:4 C.C. at every 200 m and preparation of alignment plans and all type of compliance if required from department

Preparation of detailed Plans and Estimates of road including typing in 5 copies, ammonia prints, with colouring of plans, proper filing, indexing and paging etc. complete and all types of compliance, if required from Department.

Survey of C.D. works including taking L-section of Road, catchment area plan by Traverse method and taking trial pits of size 1.00x1.00x1.50 m including preparation of detailed Plans and Estimates in 5 copies and all types of compliance if required from the Department.

Survey of Minor bridge including taking L section of existing road and two defined cross sections ,one of U/s and one of D/s, one vergin cross section on alternate proposed cross sections and bed slope of stream upto sufficient long distance as required with chain and compass. Taking three trial pits of size 1.00x1.00x3.0 m and collecting samples of materials at site for ascertaining the silt factor, unit weight test, specific gravity from Govt. approved laboratories( testing charges to be borne by the agency) and preparation of detailed survey data, submission of the project duly typed and colouring of the ammonia prints, site plan and other drawings etc. complete if required from the Department.

Contour Survey of stream U/S and D/S of proposed bridge site including levelling at every 30 X 30 m preparing contour map with Autocad prints etc.complete in 5 sets.

Taking longitudinal section of streams extending upstream and downstream side of the bridge site, requisite One Number of cross section of the stream on either sides block contouring and other details etc. complete. (Length of L.S. and C.S. for contouring to be worked out)

Carrying of detailed topographic survey by using total station along the existing or new road including taking L-section and cross section at every 30 meter ROW ,taking at least 10 spot levels per cross section, picking up all existing details inside the Row like electric telephone line , encroachments, structures etc. connecting all the primary total station control points by G.I.S.Bench marks level or whichever available with department using auto level and preparing Auto CAD plan by using above data taking out 1 set of black and white printout on 50 micron polyster film sheet A2 size and 2 sets of coloured printout on A2 size submitting soft copy all data on CD. Plain Terrain New Alignment

Carrying of detailed topographic survey by using total station along the existing or new road including taking L-section and cross section at every 30 meter ROW ,taking at least 10 spot levels per cross section, picking up all existing details inside the Row like electric telephone line , encroachments, structures etc. connecting all the primary total station control points by G.I.S.Bench marks level or whichever available with department using auto level and preparing Auto CAD plan by using above data taking out 1 set of black and white printout on 50 micron polyster film sheet A2 size and 2 sets of coloured printout on A2 size submitting soft copy all data on CD. Hilly Terrain New Alignmen