Municipal Corporation Tender

Supply of 9-10w bollard Graphite grey powder coated square extruded aluminium housing injection molded opal polycarbonate diffuses in fixed in die cast aluminum frames on four sides for pleasant light output LEDs mounted on top die-cast aluminium plate. Driver for 9W LEDs Lumanaire is availabile with color temperature Warm White (WW) 3000K 175K Maintenance done by separating the bollard from base plate Luminaire is provided with a base plate and fixing holes for directly mounting on the concacte pedestal Jush Graphite grey powder coated. Degree of protection 1165 (Sumilar to Bajay Surya/Wipro Onent/Reytek /K-litt

Supply Installation Testing comunsition of 3.5 mt- 4 mt spum Aluminium & extruded alloy, powder coated black/grey 60w LED side mounting arragement coloum light Voltage 140 to 270 AC Input Frequency 50 Hz.System Current in Amp. 240V AC Power Factor 0.9,THD 10%, Built-in Surge protection 4 kV & External Surge protection 10kV. Ingress Protection IP65 Mechanical impact protection IK08 complete pole with fitting Similar to (Similar to Bajaj. Surya, Reytek, K-Lite/ Wipro, Orient) Column Light designed for surface mounted. Symmetrical light distribution. Luminaire made of spun aluminium top cover, extruded aluminium alloy (grade 6063) with die-cast aluminium components of high corrosion resistance and non corrosive stainless steel fasteners. Non yellowing UV stabilized translucent acrylic diffuser, with pure PU/ polyester powder coating. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation, shall be provided with the company logo embossed on the bottom of the door and safety rope with IP protection rating. The control gear tray is prewired with 2.5 Sq.min cable,6A MCB and 32A terminal connectors forloop-in/loop-out arrangement. Any other internal cables and connections shall not be covered in the scope of supply. Protection class IP65. Pure polyester powder coated graphite grey/ anthracite grey/jet black. Available colour temperature 3000K/4000K/ 5700K. Colour rendering index (CRI)-70. SDCM-3 MacAdam. withexpected service life of at least 50,000 operating hours. Prewired with LED driver andsuitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency 90%, Powerfactor 0.95, THD 10%, Surge protection 4KV. BIS Certified

Supply, Installation Testing and Commissioning of LED garden spike light not more than 8W-10W having system output of mimiman 500 Lumens, CRI 80, CCT 2700/3000K, Full IP 65 protected, aluminium housing, operating voltage of 100 to 240 V, 50Hz, operating temperature of -40 to +50 °C, IK06 protection luminaire must have beam angle of 20deg Makes Similar to Orient, Bajaj, Surya, Wipro, Reytek

Providing C.C. foundation for swan neck / straight pole.c. 6 mtr. long pole with swan neck bracket from 1 mtr to 3 mtr long

Design & casting M - 20 Cement Concrete foundation suitable for following length octagonal pole considering the safe soil bearing capacity at site a s10 T / sq. m. at 2 mtr. depth including excavation, foundation nut bolts etc in an approved manner.b. 6-8 mtr. long pole

Design & casting M - 20 Cement Concrete foundation suitable for following length octagonal pole considering the safe soil bearing capacity at site a s10 T / sq. m. at 1.5mtr. depth including supply of steel , concrete, excavation, fixing provided nut bols with the help of template duly plastered as per design complete (for 3 to 5m octagaonal/conical GI POLE)

Providing Cement Concrete foundation for concrete filling in with 20 to 25 mm. Stone metal duly plastered with necessary curing for pole muffing or any other purposes.a. Concreting 1:3:6

. Supplying & laying (including excavation) 75mm. outside dia. DWC Pipe.

. Supplying & laying (including excavation of road) 50 mm. outside dia. DWC Pipe.

Providing & Erecting Lum wiring with 3 X 2.5 Sq. mm. F.R.Copper wire PVC coated as per approved list.

Supply & laying PVC/ armoured aluminium conductor cable 1100 V grade ISI MarkB1. 2 X 10 Sq mm

d. 4 X 10 Sq. mm

e. 4 X 16 Sq. mm.

f. 3.5 X 35 Sq. mm.

Providing & Erecting iron work for various works.

A) Providing & errection of junction boxes of 18 SWG GI sheet of required sizes including accessories1.Sheet Size 20x15x15 cm

3. connector 2way 4 pole,440v, nut bolt type (motor connector

5.supply & erecting MCB 0.5A to 5A Make- L & T/Havells/legrand

6. Allum. Lugs for upto 16 Sq.mm cable

Provinding & erecting pipe earthing with 25 mm dia. 1.5m long GI pipe & G I wire 3mtr. By driving /buried

Supplying & ercting GI pipe "A" grade of following Dia. For erection of armoured cableb) 40mm

c) 50mm

Supplying and Erecting integrated LED street Light Fitting 50W IP65 IK08 class having Single piece pressure dia cast Aluminium housing ,having sytem lume output of Min 4400 Lumens, min efficancy of 110 lumen/WCRI 70, CCT up to 6500K THD10% P.F 0.95 Operating range of 140-270V inbult surge protection of 10kV, life of 50,000 Hrs. at L70B50, including driver complete With 3 year Warranty as per spcificatoin No. FG-ODF/FLS22. Maintainance of Fitting on any DamageI Repair in the Fitting up to three year From the date of installation is in scope of Contractor.or..Make Philips / Orient as Approved by Executive Engineer Electrical NMC Nagpur

Supplying and erecting LED Flood light fitting of 120W, including lamp, with PF 0.95, class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2or..Make Philips / Orient as Approved by Executive Engineer Electrical NMC Nagpur

Supply, Installation, Testing and Commissioning of exterior rated 3000k / Mono IP68 LED Strip light having beam angle of 110deg, sealed with anti-UV polyurethane without color shifting and anti-UV aging. Lumen output from 400Lm/Mtr. having maximum wattage of 25W for 5m, Product width not more than 12mm, better color consistency for visual comfort, DC 24VDC, Class III for safety use Long lifespan 30K hrs. L70B50@35deg C, Lead cable with suitable numbers of clip,screw,end caps ,mounting tracks, diffuser and waterproof connector. The luminaire should provided with Operating Temperature : -40°C to +50°C , BIS Certified Mandatory and must be submitted for records. LM-80 Reports and test certificates for luminaire will be submitted post the issuance of LOA to the successful bidder and before the supply of material. LED Strip light must be supplied along with necessary mounting accessories, tracks, diffuser, powersupply and other items as applicable. Complete installation with foundation arrangment & in proper cagging for safety. Complet with all accessories.with 3 years warranty.

Supply, installation, testing & commissioning of LIGHT FIXTURE. Spot Light 10-15 W , LED,RGBW, (Ethernet Compatible), IP 66. The housing in light weight, made of high strength die cast aluminium and coated by static powder making it weather Projector Light 10-15 W, (resistant Protection screen in while tempered glass with high impact resistance. High precision dial ensures precision angle adjustment. Premium thermal management by high heat conductivity aluminim alloy and thermal fins, the fixture IP66 rated. (Power LED Module with high heat efficacy LED's, on printed Circuit Board with metal core plate. Electronic Power Supply for LED module, which offers Protection against short circuit Over- Voltage & Over - Current with in built surge protection. Lens made of PC which should offer beam angle as per site requipment. Estimated LED Lifetime is L70-50,000 hours minimum LM80 report from LED Manufacture should be submitted for the concerned engineer incharge for approval of light fixture. (Projector Light 20-30W, ) Luminaire performance & safety : IEC 60598, IS 10322-5 IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015, IES, LM 79, & TTC certificates should be provided from NABL accredited lab. Certification: CE Certified, ROHS compliant, BIS Certification for luminaries & Drivers. (Including all accessories with safety measures) with 3 years warranty.

SITC of artistic Insects form to be made in Acrylonitrile butadiene styrene of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired Animatronic Butterfly shaped public lighting fixture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the Insects form. Size of the animatronic Butterfly should have H 600 mm and proportionate width with the thickness of 10-15 cm . DC12/24V IP67 LED Driver should be provided seperately for each Butterfly/group of Butterflies. with 3 years warranty.

SITC of artistic Insects form to be made in in Acrylonitrile butadiene styrene of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be sculpted/formed in the desired Animatronic Bee shaped public lighting fixture . This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the Insects form. Size of the animatronic Bee should have L 700 mm and proportionate width with the thickness of 10-15 cm . DC12/24V IP67 LED Driver should be provided seperately for each Bee/group of Bee. with 3 years warranty.

Supplying and erecting Three Phase 415 V, Street light Control pannel up to the max load of 12kw, TPN MCB 63 A, powder coated CRCA 14 SWG sheet, outdoor type ,having IP54,IK10 protection , suitable rating contractor, 24hrs satronomical time switch with minimum 5 year battery back up auto/manul seector switch, ON/OFF Push buttons, indicator with over current,