Municipal Corporation Tender

Providing and laying in situ/readymix M-20 cement concrete of trap/granite/quartzite/gneissmetal for approachslab/Rigidpavement including compacting,finishing,curingetc.complete.(excluding reinforcement) (with reversible drumty pemixer/concrete batch mixplant (panmixer) with SCADA with fine agreegates of required specifications (Naturalsand/VSIsandfinelywashedetc),cement6.40 bags/cumt)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 oftrap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such otheritems including bailing out water, Steel centering, formwork, laying/ pumping,compacting, roughening them if special finish is to be provided, finishing unevenandhoneycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster isconsidered forrendering uneven and honeycombed surface only. Newly laid concrete shallbe covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not beallowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. Withfine aggregate (Crushed sand VSI Grade)

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 m One Metric Tonneo 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide)

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor,Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge

Add For Royalty Charges + DMFF

As Per MMt Sheet

Add For Quality Control Testing Charges

Add For GST Charges 18% On A