Municipal Corporation Tender

Providing soling using 80mm size trap metal in layers of 230mm each including filling voids with sand, ramming, watering etc. complete.( Filling with sand cushion)

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and casting in situ cement concrete M25 of trap metal for R.C.C.Raft design and drawings including and bailing out water, steel centering, Plywoodwith Architectural finish/steel form work, compacting, finishing uneven and honey surface with C.M. of 1:3 sufficient minimum thickness to give smooth and even surface and curing etc. complete. (Excluding reinforcement)

Providing and casting in situ cement concrete M25 of trap metal for R.C.C.Columns design and drawings including steel centering, Plywood/steel form work, compacting, finishing uneven and honey surface with C.M. of 1:3 sufficient minimum thickness to give smooth and even surface and curing etc. Complete.

Providing and casting in situ cement concrete M25 of trap metal for R.C.C.Beams & Lintel design and drawings including steel centering, Plywood/steel form work, compacting, finishing uneven and honey surface with C.M. of 1:3 sufficient minimum thickness to give smooth and even surface and curing etc. complete.

Providing and casting in situ cement concrete M25 of trap metal for R.C.C. Slab & design and drawings including Steel centering plywood \ steel form work . Compacting, finishing uneven and honey surface with C.M. of 1:3 sufficient minimum thickness to give smooth and even surface and curing etc. complete.

Providing and casting in situ cement concrete M25 of trap metal for R.C.C. Pardi as per design and drawings including Steel centering plywood \ steel form work .Compacting, finishing uneven and honey surface with C.M. of 1:3 sufficient minimum thickness to give smooth and even surface and curing etc. complete.

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually ,striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing second class burnt brick masonary with conventional / I.S.Type bricks in cement mortar 1:6 in super structure including striking joints, racking out joints and watering and scaffolding complete.

Providing sand faced plaster for external portion in c.m using approved screened sand in all posiions including base coat of 23mm thick in c.m 1:4 using waterproofing compound at 1kg per cemnet bag, curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in c.m 1:3 finishing the surface by taking out grains, making grooves and curing for 14 days, scaffolding etc complete.

Providing and fixing ceramic tiles of IS std and approved qualitey cm size for flooring in required position laid on bed of cement mortar 1:4 including cement float filling joint with white \ colour cement slurry, cleaning, etc. complete.

Providing and laying in position polished Kota Stone flooring 55x55 of approved quality 25mm to 30mm thick in plain/diamond pattern on a bed of cement mortar 1:6 including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. Complete

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg / sq.m. as per drawng ,Including fixtures , nevcessary welding & painting etc complete.

Providing and Constructing Brick Masonry inspection Chember 90 X 60 X 40 Cm including 1:4:8 C.C foundation, 1:2:4 c.c Channels, plastering inside & Outside etc.

Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (140 kg)

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.

Providing and fixing 60mm thick unishape gray cement concrete interlocking pavers {monolithic - single layer precast concrete blocks manufactured in gray cement only } in red { terra cotta } black, brown colour with bayers pigment having average crushing strength 35 N\sq.mm with supers chemical pigment @ 3% by wt of cement placed on average thickness of 45mm uniformly graded river sand cushioning with proper compacting with mechanical compactor with proper level, grade and camber etc.complete as directed { octroi receipt must be produced on the site along with delivery of good, if not.

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Transportation of excavated earth including loading and unloading per truck trip of 6.00 cubic meter . Capacity per trip a) lead upto 5 km .

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources),

Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.

GARDEN SOIL :- Supplying on site gaarden soil well seived 90% to paass trough I.S Seive of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry.The colour of the soil generally be red.The soil will be measured by measuring box (Farma) Item included royalty charges octroi, corporation tax, Transportating, Loading-unloading ec. Lead charges per 45 Km. considered).

Filling fresh garden soil/ silt & manure in excavated area including lead up to a distance of 50 Mtr (1/10 unskilled labour)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc.and including one coat of anticorrosive paint and over it twocoats of oil painting of approved quality and shade etc.complete.

Prepairing lawn (30 cm):- Excavation the ground a required depth of 20 cms removing & conveying unwanted stuff to a required distance as directed. Filling freh garden soil/silt & manure in excavated area in 3:1 proportion to a height 20 cms mixing garden soil & manure thoroughly well. levelling watering on previous night planting required variety of lawn grass a directed and maintaining till welll established by watering, weeding clipping, rolling, etc complete

Providing the srubbery Excavation the ground to required depth of 30 cm removing nd conveying unwanted stuff to a arequired distance as directed. Filling the fresh garden soil & manure in 3:1 proportion to a height of 30 cms Mixing garden soil & manure thoroughly well, levelling as directed watering orevious night, planinting well rooted shurbs 0.5 mtr apart as directed & maintaining till well established by watering weeding string of soil replacing of casulties etc complete.

Planting small and medium size ornamental/flowering plant:- Digging pit with size 0.6m x0.6m x0.6 m removing & conveying unwanted stuff to a required distance as directed.Filling the pit with fresh garden soil & Farm Yard Mmanure throughly well, levelling, watering on previous night. Planting one or two year old helthy plant saplings aas per specification, Maintaining till well established by watering stirring, of soil and manure, replacing casualities etc complete.

Carrying out Servicing of DG set up to 50 kVA with/without AMF Panel of any make to ensure smooth running of DG set for 30 mins on load. Checking for abnormal sound and leakages, Carry out visual inspection of all moving parts, oil levels, oil filters, fuel filters, air filters and clean them properly, rectify the minor leakages if any. Inspect alternator, stator and rotor for normal speed & proper frequency, Examine battery charging with monitoring system and recording voltages, checking battery cells gravity and topping up with Distilled water, Checking V belts with necessary adjustment, Checking and retightening of nut bolts including coupling bolts of engine and alternator, Checking & cleaning of radiator and leakage testing Checking of radiator & fuel supply hose pipes, Checking of AVR, excitation diodes, its connections confirming proper output voltage. Checking & resetting of valve tappets, Cleaning of DG set internally using blower, cleaning radiator, Attending breakdowns as and when required during One month period or during VIP visit within 2 hours of intimation and Submit the servicing report to engineer in charge.(Non Comprehensive) as per specification No. GEN-SER-AMC

Annual maintenance contract for Air Compressor with 2 piston cylinder head 5 Hp,1440 RPM motor with starter .(For two years)

Annual maintenance contract for Shredder with crusher 10 Hp 3 phase motor.(For two years)

Annual maintenance contract for Screw type solid liquid separator to separate total suspended solid (TSS) from the manure Slurry having specification-a) Flow rate 15 Cum/Hr. b) Drive motor power- 2.2 KW (3 HP)(For two years)

Annual maintenance contract for Air Blower 2.2 KW, 1400 RPM,Air flow 30Cum/Hr,PR/VAC 400 Bar.(For two years)

Collecting,transporting solid waste from animal slaughter house, hotel waste from hotel daily to bio gas plant etc.

Operation and maintenance of the 2 TPD Capacity Bio-gas plant with all electrical, mechanical,civil work and with necessary raw material ,mechanical,manpower etc. comlpete