Municipal Corporation Tender

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cementmortar1:6infoundationandplinthofinnerwalls/inplinthofexternalwallsincludingbailingoutwatermanually,strikingjointsonunexposedfacesandwatering etc.complete..BDH1, 28.01, Page No- 201

Filling in plinth and floors with contractors material/ brought from out side and approved by Engineer in charge in layers of 15cm to 20 cm including watering and compaction etc. complete BDA11, 21.37, Page No- 161

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces,raking out joints on exposed faces and watering etc. Complete.BDG1, 27.05, Page No- 199

Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer)etc.complete.With fine aggregate (Crushed sand VSI Grade). BDF8, 25.70, Page No- 186

Providing and fixing in positionTMT- FE-500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. BDF17, 26.33, Page No- 192

Providing internal cement plaster 20 mm thick in a single coat using Ready to use wall plaster to concrete, brick surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete. a) cement ratio 1:5 With Prior Approval of Concerned S.E. BDL1, 32.06, Page No- 211

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receie the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surfacebytakingout grains and curing for fourteen days scaffolding etc.complete.BDL7, 32.11, Page No- 211

Providing flush grooved pointing with cement mortar 1:3 for brick work including scaffolding and curing etc. complete.BDL15 A, 32.16, Page No- 212

Water proofing Treatment to new Toilet/ bath room by using Polymeric Cementitious Membrane as approved by Engineer in charge, followed by 112 mm thick brick bat coba covered with 20 mm mortar finish. If there are cracks on the bare slab, open the crack in V Groove and fill it with ready to use repair polymer modified mortar based on special cements, aldehyde based polymers with thixotropy modifying agents. If there are lots of honey combs and identified bad patches of concrete the same should be grouted as per the instructions of site incharge. (The grouting shall be paid separately). Clean the entire surface thoroughly and over this prepared surface, apply three coats of polymeric Cementitious waterproofing coating having an on-toxic, 2- (methoxycarbonyl)-1-propene-Butyl-2 propenoate (MPBP) based polymeric water proofing solution as approved by Engineer incharge. Provide and lay 112 mm average thicknes of brick bat coba in cement mortar 1:5 over 12 mm thick CM 1:3 bedding with one pouch of 330 grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents as approved by Engineer in charge per 50 Kg bag of cement and finishing with 20 mm thick cement plaster in cement mortar 1:3 by mixing one 330 grams pouch of above 52.13, Page No- 427

Providing and laying matt finish ceramic tiles of having size 30cm x 30cm confirming to I.S.15622/2006 (group DII-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/ colour cement slurry cleaning curing etc. complete. .BDM 12, 33.24, Page No- 217

Providing and laying ceramic tiles of having size 30cm .x 30cm. and confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. BDM 13, 33.25, Page No- 218

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in one coat including scaffolding, preparing the surfaces.(excluding the primer coat.)etc. complete. BDP 5, 36.10, Page No- 230

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in one coat including scaffolding, preparing the surfaces.(excluding the primer coat.)etc. complete. BDP 5, 36.10, Page No- 230

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scafflding if necessary, cleaning and preparing the surface, watering for two days etc. complete. BDO 8, 35.13, Page No- 227

Providing and fixing factory made panelled door shutter in single leaf 35 mm thick style and rail without ventilator with CCTW panels 12 mm thick includng wrought iron holdfast and stainless steel fixtures with oil painting 3 coats etc. complete. BDT, 39.13, Page No- 249

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 80 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both sides, fixing in cement mortar 1:3 and curing etc .complete. BDF 20,26.47, Page No- 196

Providing and fixing Orissa Pan of size 580 x 445 x 260 mm with approved make flush valve including trap, C.I. soil and vent pipe upto out side face of wall including 100 mm dia. C.I.plug, bend and necessary pipe connection, etc complete.Asdirectedby Engineer in charge. 48.38, Page No- 322

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cmx 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channel shalf round G.S.W. pipes, Brick Masonry, plastering from in side and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram with frame etc complete. BDV 43, 42.12, Page No- 280

Providing and laying 150 mm dia salt glazed stone ware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. BDV 39, 42.04, Page No- 279

Providing and fixing on walls/ ceiling/ floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BDV 5, 42.56, Page No- 285

Providing and fixing 20 mm dia. Screw down bib/ stop tap of brass including necessary socket union nut complete. BDV 8, 41.41, Page No- 274

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/ waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete BDV , 42.51, Page No- 285

Providing and laying concrete pipe sofI .S. NP. Class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. BDV 41 , 42.09, Page No- 279