Municipal Corporation Tender

Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying in situ cement concrete M-20 of trap/granite/ quartzite/gneisis metal for reinforced cement concrete work in foundation like raft, grillages, strip foundation and footings of reinforced cement concrete columns and steel stanchion including bailing out water, form work, compaction and finishing, curing (Excluding steel reinforcement and structural steel) etc. complete. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type Mixer, with natural sand..

Providing and casting in situ cment concrete M-20 of trap/granite/ quartzite gneiss metal for reinforced cement concrete columns as per detailed designs and drawings or as directed including centering, formwork, cover block compaction finishing the formed surfaces with cement morter 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) etc. complete. complete, with fully automatic micro processor based PLC with SCADA enabled concrete batch Mix plant(pan mixer), with natural sand..

Providing & casting in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing etc. complete. (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand.

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. a) For TMT Fe 415 steel bars ( If Mild Steel/HYSD steel is to be used prior permission from S.E. should be taken )

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete

Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles ( 50mm x 50mm x 6mm) at 2.5 Metres, Center to center including excavating pits for foundqtion, fixing post in cement cocnrete 1:4:8 of size 45 x 45 x 45 cm fastening the wire and painting the M.S.Angles with one coat of red lead primer and two coats of painting etc.complete.

Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kg/Smt

Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete

GARDEN SOIL : Supplying on site garden soil well sieved 90% to pass through I.S. sieve of 10 mm. size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The colour of the soil generally be red. The soil will be measured by measuring box. (Farma) Item includes royalty charges Transporting Loading unloding etc. (Lead cahrges per 20 km. considered)

Filling fresh garden soil/silt & manure in excavated area including lead upto a distance of 50 Mtrs.

PREPARING INSTANT LAWN :- Excavating the ground to a required depth of 20 cms. removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/slit and manure in excavated area in 3:1 proportion to a height of 20 cms. Mixing garden soil and Manure thoroughly well, leveling, with required slope light watering on previously night rolling on surface. fixing readymade lawn turf, rolls, or slabs of required variety as directed. ramming on it for proper fixing and maintaining till well established by watering, weeding, clipping, or mowing etc complete

PREPARING FLOWER BED :-Excavating the ground to the required depth of 30 cms, Removing and conveying unwanted sruff to a required distance as directed, Filling fresh garden soil nurture in excavated area in 3: 1 proportion to a required height of 30 cms Mixing garden soil and manure thoroughly well. levelling watering. on previous night planting seedlings of required annuals 25 cms. apart Maintaining till well established by watering, weeding. Stirring replacing of casualties etc, Complete.

PLANTING LARGE FLOWERING/ SHADY TREES :- (Minimum Height of 2 Mtr.) Digging pit with size 0.9 x 0.9 x0.9 m , removing and conveying unwanted stuff to a required distance as directed filling the pit with approved excavated material upto a height of 0.30m and remaining height of 0.60 m with fresh garden soil and manure in Proportion Mixing garden soil and manure thoroughly, well levelling ,as directed, watering on previous night, planting two to three year old mininum 1 mtr. height healthy threes sapling as per specifications Maintaining till well established by watering, weeding stirring, of soils replacing of casualty's etc. complete.

Planting Large Flowering / Shady Trees : (Minimum Height of 1 Mtr.) Digging pit with size 0.6 x 0.6 x0.6 m , removing and conveying unwanted stuff to a required distance as directed filling the pit with approved excavated material upto a height of 0.30m and remaining height of 0.60 m with fresh garden soil and manure in Proportion Mixing garden soil and manure thoroughly, well levelling ,as directed, watering on previous night, planting two to three year old mininum 1 mtr. height healthy threes sapling as per specifications Maintaining till well established by watering, weeding stirring, of soils replacing of casualty's etc. complete.

Supplying, installing, testing and commissioning solar LED mini Hi – Mast 20 W x 5 nos. LED luminaries, 2 nos. x 150 AH 12 V lithium battery, min. 400 Wp SPV modules, mounted on GI octagonal pole with bottom of 130 mm A/F, top 70 mm A/F 6 mtr height along with brackets, foundation, earthling and necessary accessories, waterproof battery box, suitable solar inverter, timer setting arrangement, GI / powder coated module structure, with first 6 hr. full intensity light output and following 6 hr. with half intensity light output along with solar and local electrical power supply charging facility complete. ( with 5 years warrantee )

Rcc garden benches(concrete bench)

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge

Testing Of Compressive Strength Concrete M20 Cubes (Avg of 3 cubes )

Testing of Compressive Strength Concrete of Paver Block (Compressive Strength test,water absorption test,flexural test resistance to waer test ) ( 60 mm thick)