Municipal Corporation Tender

Item no. 4 Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in pexternal walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. complete As per SSR Item no. 27.01

Item no. 5 Providing rough cast cement plaster externally in two coats to ceonreter, brick or stone masonery sufaces in all position with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12 mm thick in proporation 1:1 1/2:3 including scaffolding and fourteen days curing complete. As per SSR Item No. 21.38

tem no. 6 Providing dry / trap / granite / quartzite / gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete As per SSR Ite No.21.38

Item no.7 Providing and laying Cast in situ / Ready Mix cement concrete in M-15 of trap / granite / quartzite / gneiss metal for foundation and bedding / stpes including steel centering, formwork, laying / pumping, compacting, roughening them if specials finish is to be provided, finishing unevern and honey combed surface and curing etc. complete The Cement Mortar 1:3 plaster is condered for rendering uneven and honeycombed surface, only, Newly laid concrete shall be covered by gunnjy bag, plastic, tarpaulin etc. ( Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type ixer / concrete Batch mix plat ( Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) As per SSR Item No. 24.04

tem no. 8 Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50x50 mm, 8 gauge thick and fixed 75 mm above ground level on verical M.S. Angles of 40 x 40 x 6 mm size, including excavating p9its for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M.c/c with iron bar 16 mm dia as hold fast includin welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm jsize and vertical M.S. flat 35 x 5 mm and 25 x 5 mm hoicontal including cross cupport of 40 x 40 x 6 mm angles both side at every corner or bed embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil panting etc. complete. As per SSR Item No. 46.39

tem no. 9 Providing and fixing colour coated Zincalume ( R ) AS150 ( min 150 gms / sq.mt. total on each side) profiled sheets for roofing. The feed material is manufacured out of nominal 0.45 mm Base Metal Thickness ( BMT) ( 0.5 mm TCT), Hi-strength steel coated with Aluminuum-Zinc alloy ( 55% aluminium 43.4 % Zinc 1.6% silicon ) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment ). The paint shall have a total coating thickness of nominal 35 um, copmrising of nominal 25 um exterior coat on top surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center - to - center. The end rib shall be disigned for anti-capillay groove. and return leg. The feed material should have coil manufacturers products details marked a regular interval. Including fasteners with min. fastened with min.25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complee. ( weight of profile 4.52 kilogram One Square Metre ) As per SSR Item No.38.34

tem no. 10 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two daysw etc. complete. As per SSR Item No. 35.14 Page no. 165