Municipal Corporation Tender

Supply, Installation Testing and Commissioning of LED garden spike light not more than 9W having system output of minimum 500 Lumens, CRI 80, CCT 3000K, Full IP 67 protected, aluminium housing; operating voltage of 100 to 240 V, 50Hz, operating temperature of -40 to +50 °C, IK06 protection. luminaire must have beam angle of 20deg. with 3 years warranty.

SITC of Red terracotta Sandstone bollards of height 750 MM and top and bottom of 150mm x 150 mm with LED of 15-25 watts with mono colour. The Luminaire should be capable of operating at 12V/ 24VDC, the thickness of stone 25mm, cutwork design approved by an engineer in charge. with 3 years warranty.

SITC of Red Terracotta sandstone pillar of height 4.5 mtr , 474mmX 474mm. At top illuminated Lotus bud of 600mm height alabaster stone. The Base is 691mm X 691mm red sandstone. Illumination portion at the bottom and top portion as per design by PMC and approved by Engineer in Charge.with 3 years warranty.

SITC of Decorative glowing sticks 1.5 mtr Made of high-quality SS304 materials and acrylic diffuser of 3 watts.2700k with operating voltage 12V/24V , the surface is smooth, safe and durable,with an enlightening glowing effect in the translucent Diffuser of special grade so that uniform glow of the desired amber colour is achieved from the surface . The diffuser is to be formed in the desired artistic shape of height 0.6 mtr and a metal stick of height 0.9 mtr. with 3 years warranty.

SITC of Fiberglass Glowing Artifacial bamboos 0f 3 mtr height made up of MS Structure with polycarbonate / acrylic cover. Operating Voltage should be : DC 12V /DC 24V complete with required power SITC. LED Modules of required CCT to give the natural effect. LED modules body should be made of Aluminium PCB, PC Lens, Plastic Injection process, LED's should have wide beam angle of 120 degree with uniform illumination. Ingress protection rating of LED modules. Height :3 mtr with 3 years warranty.

SITC of artistic floral form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be formed in the desired artistic shape of various artificial flowers of total height 1.5 mtr . This should be artistically installed to create glow and aesthetics to these unique elements of nature. These floral forms to be illuminated using special LED lights embedded inside the polymer to provide effective and natural looking glow. with 3 years warranty.

Supply of 0.9m Height Decorative Bollard, made of Steel pipe and no fabrication from sheet metal is allowed with base plate. The entire Column light needs to be Hot Dip Galvanized. The luminaire should be with an effective heat sink design to maintain the operating temperatures at LED junction and other components within permissible limits corresponding to the designated design life and the IP65 optical compartment. The diffuser shall be opal PMMA/PC with CNC cutting design and PU painted with 2 coats as per approved by engineer in charge and designed by PMC with an opening of 450mm (+/-5%). The system AC wattage of the luminaire shall be 27W (± 10%), colour rendering index CRI /= 70 and residual flux of 70% (L70) @ 50,000 hours at Ta of 25°C. Colour temperature (CCT) of 3000K. The luminaire shall be suitable for operating within temperature range from - 10°C to + 40°C. The light source should be (Make- Osram/ bridgelux /nichia /cree /Lumiled) with Macadam /= 5. The luminaire should be deigned to operate at any voltage from 140V to 270V, with Power Factor ≥ 0.95 and shall be provided with optional built in Over Voltage and Under Voltage protection and internal surge protection of 4/4 kV in both Common & Differential Modes and external surge protection of 10 kV, electrical Class I. The luminaire shall comply with safety requirements of applicable BIS standard . Overall outer dimensions of luminaire shall be Round 160mm (±3%) and 900mm (±5%) Height.The offered luminaire shall be made in India with local value addition of not less than 70%, with the housing die-casted & manufactured in India.. The luminaire should be having a warranty for a period of 3 years against any manufacturing defects. with 3 years warranty.

Supply, Installation, Testing and Commissioning of exterior rated 3000k / Mono IP68 LED Strip light having beam angle of 110deg, sealed with anti-UV polyurethane without color shifting and anti-UV aging. Lumen output from 400Lm/Mtr. having maximum wattage of 25W for 5m, Product width not more than 12mm, better color consistency for visual comfort, DC 24VDC, Class III for safety use Long lifespan 30K hrs. L70B50@35deg C, Lead cable with suitable numbers of clip,screw,end caps ,mounting tracks, diffuser and waterproof connector. The luminaire should provided with Operating Temperature : -40°C to +50°C , BIS Certified Mandatory and must be submitted for records. LM-80 Reports and test certificates for luminaire will be submitted post the issuance of LOA to the successful bidder and before the supply of material. LED Strip light must be supplied along with necessary mounting accessories, tracks, diffuser, powersupply and other items as applicable. Complete installation with foundation arrangment & in proper cagging for safety. Complet with all accessories.with 3 years warranty.

Supply, installation, testing & commissioning of LIGHT FIXTURE. Spot Light 10-15 W , LED,RGBW, (Ethernet Compatible), IP 66. The housing in light weight, made of high strength die cast aluminium and coated by static powder making it weather Projector Light 10-15 W, (resistant Protection screen in while tempered glass with high impact resistance. High precision dial ensures precision angle adjustment. Premium thermal management by high heat conductivity aluminim alloy and thermal fins, the fixture IP66 rated. (Power LED Module with high heat efficacy LED's, on printed Circuit Board with metal core plate. Electronic Power Supply for LED module, which offers Protection against short circuit Over- Voltage & Over - Current with in built surge protection. Lens made of PC which should offer beam angle as per site requipment. Estimated LED Lifetime is L70-50,000 hours minimum LM80 report from LED Manufacture should be submitted for the concerned engineer incharge for approval of light fixture. (Projector Light 20-30W, ) Luminaire performance & safety : IEC 60598, IS 10322-5 IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015, IES, LM 79, & TTC certificates should be provided from NABL accredited lab. Certification: CE Certified, ROHS compliant, BIS Certification for luminaries & Drivers. (Including all accessories with safety measures) with 3 years warranty.

Supply, Installation Testing and Commissioning of LED garden spike light not more than 9W having system output of minimum 500 Lumens, CRI 80, CCT 3000K, Full IP 67 protected, aluminium housing; operating voltage of 100 to 240 V, 50Hz, operating temperature of -40 to +50 °C, IK06 protection. luminaire must have beam angle of 20deg. with 3 years warranty.

SITC of Solar Tree with 8 charging points made of MS structure in the shape of a tree with branches having a solar panel for charging points and 3 watts LED on each leaves having a DC battery inbuilt in it. The height for the structure should be around 3- 6 mtr having 10 branches with PU 2 coat painting. The circular platform for seating arrangements as shown. with 3 years warranty.

SITC of FRP Designer Lighting Pole Made of marine quality Composite. It is Reinforced with glass fibre Chopped Strand Mat EMC450, with Area Weight of =/-7.5% as per ISO3374, Moisture Content of 20% as per ISO3344, Size Content of 3.7(1+31%) as per ISO 1887 and Breakage Strength of 140N as per ISO 3342. Isophthalic Unsaturated Polyester laminating resin having medium viscosity and Low reactivity based on Isophthalic acid and standard glycols, dissolved in styrene monomer is used in making the product. The resin has Viscosity at 25°C ( P ): 400 to 500, Acid Value (mg KOH/gm): 15-20, Specific Gravity at 25°C: :1.11‡0.02, Volatile content (%): 38 +/-3, Gel time at 30°C (minutes), (with Resin = 100 grams; Accelerator 3% Cobalt Octoate = 1.0 and Catalyst MEKP M-50= 1.5 ml): 8 to 12. Curedclear Cast Resins comes with the following properties: Barcol hardness: 42, : 42 Heat deflection temperature (°C): 94, Tensile strength (kg/cm2): 600, Tensile modulus Map of 3100; Elongation at break: 2.5%; Flexural strength (kg/cm2): 1050, Flexural modulus (Mpa) of 3200, Water absorption @25°C (mg) (after 24hours) of 20. The method of testing and the tolerances are as prescribed in IS-6746-1994. The product is Weatherproof and maintenance free with long design life. Pre-paint treatments It is a self-coloured textured surface finish with scratch-resistant, aliphatic grade U.V. stabilized PU paint with UV stable Polyurethane with viscosity of 80(+/-3 Sec), Gravity 97(+/-3)Grams, Fineness Of Grind 3 Micron with long-standing life. The FRP is of minimum 2 mm Thickness with 10% tolerance. The FRP Pole is 6000 mm ht & 2040 mm wide. The Pole has 1 PC Luminaire on top which is suitable for 30wt LED bulb & 4 Diya lamps at the base bollard. The Pole has metal section reinforced with FRP for product stability. The Pole comes with a base plate to mount it on the floor surface.. All hardware is SS304. The pole should be aper designed by PMC and approved by Engineer in charge.with 3 years warranty.

SITC of Fiberglass Glowing Artifacial bamboos 0f 3 mtr height made up of MS Structure with polycarbonate / acrylic cover. Operating Voltage should be : DC 12V /DC 24V complete with required power SITC. LED Modules of required CCT to give the natural effect. LED modules body should be made of Aluminium PCB, PC Lens, Plastic Injection process, LED's should have wide beam angle of 120 degree with uniform illumination. Ingress protection rating of LED modules. Height :3 mtr with 3 years warranty.

SITC of artistic floral form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. The polymer to be formed in the desired artistic shape of various artificial flowers of total height 1.5 mtr . This should be artistically installed to create glow and aesthetics to these unique elements of nature. These floral forms to be illuminated using special LED lights embedded inside the polymer to provide effective and natural looking glow. with 3 years warranty.

Supply, installation, testing & commissioning of LIGHT FIXTURE. Spot Light 10-15 W , LED,RGBW, (Ethernet Compatible), IP 66. The housing in light weight, made of high strength die cast aluminium and coated by static powder making it weather Projector Light 10-15 W, (resistant Protection screen in while tempered glass with high impact resistance. High precision dial ensures precision angle adjustment. Premium thermal management by high heat conductivity aluminim alloy and thermal fins, the fixture IP66 rated. (Power LED Module with high heat efficacy LED's, on printed Circuit Board with metal core plate. Electronic Power Supply for LED module, which offers Protection against short circuit Over- Voltage & Over - Current with in built surge protection. Lens made of PC which should offer beam angle as per site requipment. Estimated LED Lifetime is L70-50,000 hours minimum LM80 report from LED Manufacture should be submitted for the concerned engineer incharge for approval of light fixture. (Projector Light 20-30W, ) Luminaire performance & safety : IEC 60598, IS 10322-5 IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015, IES, LM 79, & TTC certificates should be provided from NABL accredited lab. Certification: CE Certified, ROHS compliant, BIS Certification for luminaries & Drivers. (Including all accessories with safety measures) with 3 years warranty.

Supply, Installation, Testing and Commissioning of exterior rated 3000k / Mono IP68 LED Strip light having beam angle of 110deg, sealed with anti-UV polyurethane without color shifting and anti-UV aging. Lumen output from 400Lm/Mtr. having maximum wattage of 25W for 5m, Product width not more than 12mm, better color consistency for visual comfort, DC 24VDC, Class III for safety use Long lifespan 30K hrs. L70B50@35deg C, Lead cable with suitable numbers of clip,screw,end caps ,mounting tracks, diffuser and waterproof connector. The luminaire should provided with Operating Temperature : -40°C to +50°C , BIS Certified Mandatory and must be submitted for records. LM-80 Reports and test certificates for luminaire will be submitted post the issuance of LOA to the successful bidder and before the supply of material. LED Strip light must be supplied along with necessary mounting accessories, tracks, diffuser, powersupply and other items as applicable. Complete installation with foundation arrangment & in proper cagging for safety. Complet with all accessories.with 3 years warranty.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template,duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP

Supplying and erecting GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 7-6-9/2021-22

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 Kv 1-3-28/2021-22

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Making trench in hard murum/Tar road having 0.9 m depth and minimum 0.3mtr width for laying provided cables of voltage range 3.3 kV to 11 kV complete as per specification No. CW-EXN-CTR