Municipal Corporation Tender

Item No.3 Providing brick masonry with interlock "Fourlock" bricks in plinth & super structure of specified 150 mm thick including construction with interlock "Fourlock" bricks,filling the hollow spaces with cementious grout material of proportion of C:M 1:6 using trap stone grit metal /artificials and including dusting off the finished brick masonry surface,watering & curing etc complete. ( Excluding steel reinforecement for strengthening ) 1956/51.120

Item No.4 Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:4 with out neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete .958/32.04

Item No.5 Providings and faced plaster externally in cement mortar using approved screeneds and, in all positions including base coat of 15 mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.963/32.11

Item No.6 Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 1962 (Revised) with approved face veneers on both faces with/ without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, hold fasts,mat finish stainless steel fixtures fastenings, finishing with french-polish /waxing complete. (withoutdoor frame).(Sample tobegot approvedfrom Ex.Engineer before use) Commercial Hard Wood shutter 1885/51.60

Item No.7 Providing and fabricating structural steel work in rolled sections like joists, channels,angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, bracesetc. and including one coat of anti corrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. 816/23.01

Item No.8 Providing and fixing 1st class white glazed earthenware Orissa Type W.C.Pan 580mm dia including Por Strap cast iron soil and vent pipe upto the out side face of the wall (1:5:10) cement concrete bedding 15mm thick,10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete.1404/42.33

Item No.9 Transportation

Item No.10 Providing water proof plaster in W.C.and bath 20mm thick for dado in cement mortar 1:3 with neat finishing,floating using water proofing compound at the rate of 1Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.943/31.07

Item No.11 Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50mm thick with 3mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete 881/26.46

Item No.12 Providing and constructing BrickMasonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes,Brick Masonry, plastering from in side and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.1383/42.12

Item No.13 Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box 1234 / 39.41

Item No.14 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15mm thickness reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for both sides,deep M.S. channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fast arrangements,M.S.Bracket plate 300x300x3.15mm minimum size and shape withs quare bar, suspension shaft of minimum 32mm diameter,hood cover of M.S.sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) 1217/39.24

Item No.15 Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete. 1035 / 33.48

Item No.16 Providing and fixing steel window of various sizes as per detailed drawing withouth ot dip zinc coating,without ventilators, including fabricating / glazing with plain /obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.) 1213/39.20

Item No.17 Providingand fixing PVC coloured Ridge tiles over UPVC roofing where required having size 113 cm x 41cm for ridge including fastening with self drilling screw having washers made of stainless steel etc. complete. 1178/38.38

For Electrification

Municipal area 5 percent add

GST 18 percent add