Municipal Corporation Of Greater Mumbai Tender

"Providing and applying 20 mm thick internal plaster with neeru finish at all heights and locations in cement mortar specified below in two coats for masonry (except stone masonry) and concrete surfa ces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding etc complete as directed By Engineer In Charge. In cement mortar 1:4"

"Providing and applying 25 mm thick external sand faced cement plaster with neat cement rendering upto 10m from ground level and at all locations in cement mortar proportion specified below in two coa ts for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface,finishing, curing, scaffolding etc complete as directed By Engineer In Charge. Min. time lag between two coats shall be 24 hours. (as per IS 2402 of 1963.) In Cement mortar 1:1"

"Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint of an approved make and colour as per manufacturers specifications to surfaces specified below, at all height and locations as directed including scaffolding, cleaning and preparing surfaces by any other approved means, etc. compl ete as directed by Engineer-in-charge : For plastered wall surface"

"Providing and applying first coat of approved Waterproof primer, and two coats of waterproof acrylic based textured exterior paint of an approved make and colour as per manufacturers specifications t o textured sand faced or other surfaces, upto 10m height from ground level and at all locations as directed including preparing surfaces for painting by any approved means, scaffolding, cleaning and c uring etc. complete as directed by Engineer-in-charge. "

"Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w alls wherever require : White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers."

Providing and Fixing MS Safety grill of weight specified below for windows as per design including fabricating the grill using M.S. square / round bar, flats and angles including painting with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc complete as directed. Grill weighing 25 to 30 kg / sqm

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved 65 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved 32 mm nominal bore.

Providing and fixing 100 mm sand cast Iron grating for Nahani/Floor trap.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 15 mm dia nominal bore '' External work''

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore '' External work''

"Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 110 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cem ent, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc . should be of same brand. No separate payment shall be made for fittings and accessories)."

"Providing and fixing polished natural stone tiles /slab as specified below of approved quality, pattern and colour for flush/projected skirting and risers including preparing the surface and levellin g in the desired line, backing of 20 thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling th e joints with neat cement or pigment mixed with cement, polishing, finishing, curing etc complete as directed by Engineer In Charge. 15 to 20 mm thk. white marble of lower quality for height upto 150 mm"

"Providing and laying in position plain cement concrete of specified grade cement with trap/granite/quartzite/gneiss metal mixing in concrete mixer including bailing out water, compacting, finishing s urface, curing and including the cost of centering and shuttering at all level : Nominal Mix of 1:2:4 (1 cement OPC: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)"

"P&L in position ready mixed design mix M-20 grade cc for reinforced cc work, using cement content as per approved design mix, including pumping of concrete to site of laying and the cost of centering , shuttering, finishing & admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per directio n of Eng-in-charge.The Mix design as per particular specfications shall be got approved by Eng-in-Charge before execution of the item.The rate shall include cost of all specified materials and operat ions at all levels and hts, including the cost of centering, shuttering and and excluding reinforcement.(Note : Cement content considered in this item is @ 300 kg/cum as per IS 456 table. No extra wil l be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for controlled concrete). Lintels, beams, plinth beams, girders, floor beam, coping.

"P,detailing,composite fabricating members like Trusses,N-girders,girders, bracings,supports,purlins,runners & similar str steel members fabricated using M.S. hollow tubular steel sections (circular & rectangular pipes) conforming to IS 1239 part-1 & 2 & of Fe250 as per spec & app fabrication dwgs (Dwg prepared by Contractor & got app from Engineer) including transportion to site, erection of str steel members for all heights & levels, provision of necessary erection & fixing bolts,nuts,washers,cleats,stiffeners,gussets,base plate, & all necessary operations like preheating, straightening, ben ding, cutting, drilling, grinding, machining if specified, welding, grinding, removing the welding burr & preparing surface for painting with wire brush cleaning & applying 2 coats of epoxy red oxide zinc phosphate primer & 2 coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engr"

"Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for dado including preparing the surface and levelling in the desired line, backing of 20 mm thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints with neat cement or pigme nt mixed with cement, polishing, finishing, curing etc complete as directed by Engineer In Charge. 25 to 30 mm thk. Kadappa stone"

Providing and fixing 30mm thick Phenol Bonded solid core flush door shutters for sliding or 'Sliding and folding' door, commercial type hot pressed with 3mm thick veneer on both faces as per design conforming to IS:2202- 1991 (Part I & II) with 3 coats of French polishing, with 12mm thick T.W. lipping all around as per detailed specifications including sliding and folding door system as approved by MCGM, gear with necessary track, brackets, and all necessary special fittings as per manufacturer’s specifications complete as directed.