Municipal Corporation Of Greater Mumbai Tender

3 IN 1 (AERIAL STROLLER + SURF BOARD + SHOULDER TWIRL) Area:- 2.13 Mtr x 1.03 Mtr. Safe Area:- 4.33 Mtr x 2.34 Mtr The center pipe is of 100 NB B Class GI pipe. Walker pedal frame duly bend is of 32 NB B Class G.I. pipe. Air Walker handle frame is of 25 NB B Class G.I. Pipe duly bend. Moving frame of Surfer is made from 40 NB B Class G.I. Pipe. MS plate of 245 x 113 x 2.8mm for footrest support. Air Walker Footrest made from PPCP /Cast Iron. Surf Board Step made of FRP / Cast Iron. Bush made from 75mm, 60mm dia seamless pipe & 60mm dia Solid bar are used. Pins used of Diameter 25mm and 12mm are made up from SAE 8620 material. The bearings used are of 6007-2RS1, 6205-2RS1 & 6201-2RS1 permanent lubricated sealed bearing of reputed brand. P.U. bush is used as Stopper to avoid the equipment abrasion. All Nut Bolts are G.I / M.S./ Stainless Steel material. Closing Caps are made up of LLDPE / HDPE /M.S. Nylon cap mounted on pins to protect bearings and pins from rain and dust. The circlips for locking are A24 & A11. Spinner knob made of PP Material. The Equipment shall be Powder coated of at least 30-50 microns thickness using Akzonobel /Berger /Prime make or equivalent.

HIP TWISTER TRIPLE AREA:- 1.4 Mtr x 1.4 Mtr SAFE AREA:- 5 Mtr x 3.5 Mtr The center pipe is of 100NB made up of B Class G.I. pipe. The bottom frame is of 32NB “B” class G.I. pipe. The handle frame is of 32NB “B” class G.I. pipe. The twister plate fitted on the bottom frame is made up of M.S. Round Plate of size Dia 300mm and 6mm thick. Bush made from 75mm dia seamless pipe, Pins used of Diameter 35mm are made up from SAE 8620 material. The bearings used are of “6007-2RS1” & “32007” Tapered roller bearing permanent lubricated sealed bearing of reputed Brand. All Nut Bolts are G.I/ M.S./Stainless Steel material. Closing Caps are made up of LLDPE / HDPE /M.S. Nylon cap mounted on pins to protect bearings and pins from rain and dust. The Equipment shall be Powder coated of at least 30-50 microns thickness using Akzonobel /Berger /Prime make or equivalent.

LEG LIFT POST AREA:- 0.9 Mtr x 0.6 Mtr SAFE AREA:- 2 Mtr x 2 Mtr The main frame Pipe is of 100 NB made from B Class G.I. Pipe. The handle frame are of 25 NB & 32 NB B Class GI pipe. All Nut Bolts are G.I/ M.S./Stainless Steel material. Closing Caps are made up of LLDPE / HDPE /M.S. Nylon cap mounted on pins to protect bearings and pins from rain and dust. The Equipment shall be Powder coated of at least 30-50 microns thickness using Akzonobel /Berger /Prime make or equivalent.

LEG PRESS SINGLE AREA: - 1.7 Mtr x 0.4 Mtr SAFE AREA: - 2.5 Mtr x 1.5 Mtr The Center pipe is of 100 NB made from “B” Class G.I. Pipe. The remaining outer frame is of 32mm NB “B” Class G.I. pipe. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mm X 300 mmX2mm thickness, deep drawn and pressed with uniform radius of 20 mm and no sharp edges. The footrest are made from PPCP /Cast Iron material. The frame of footrest made up of 25 NB ”B” class G.I. pipe. Bush made from 60mm dia seamless pipe bush are used. Pins used of Diameter 25mm are made up from SAE 8620 material. The bearings used are of “6205-2RS1” permanent lubricated sealed bearing of reputed Brand. All Nut Bolts are G.I/ M.S./Stainless Steel material. Closing Caps are made up of LLDPE / HDPE /M.S. Nylon cap mounted on pins to protect bearings and pins from rain and dust. The Equipment shall be Powder coated of at least 30-50 microns thickness using Akzonobel /Berger /Prime make or equivalent.

ABS BOARD AREA: - 2.0 Mtr x 0.5 Mtr Safe Area:- 3.5 Mtr x 1.8 Mtr The main frame Pipe is of 40 and 25 NB B Class G.I. Pipe. Fiber Reinforced Plastic sheet of 3mm thickness is Bounded on 25 NB B class G.I. pipe of main frame. All Nut Bolts are G.I/ M.S./Stainless Steel material. Closing Caps are made up of LLDPE / HDPE /M.S. Nylon cap mounted on pins to protect bearings and pins from rain and dust. The Equipment shall be Powder coated of at least 30-50 microns thickness using Akzonobel /Berger /Prime make or equivalent.

DOUBLE BAR Ground Space: 2.05 Mtr x 0.6 Mtr Safe Play Area: 4.4 Mtr x 1.8 Mtr This item being from exercise range provides a structure for physical exercise to the children. The complete structure shall be made out using 40 NB B Class GI Pipe. The spacer pipes used shall be of 20 NB B Class GI Pipe. The Equipment shall be Powder coated of at least 30-50 microns thickness using Akzonobel /Berger /Prime make or equivalent

Sky Walker AREA:- 1.8 Mtr x 0.9 Mtr SAFE AREA:- 4 Mtr x 2.1 Mtr The main frame pipe is bend from 80 NB B Class GI pipe with 250mm radius. Walker pedal frame duly bend is of 32 NB B Class G.I. pipe. The handle frame is of 25 NB B Class G.I. Pipe duly bend. The Footrest are fitted on G.I. Square pipes of 50 X 50 X 3mm. MS plate of 245 x 113 x 2.8mm for footrest support. Footrest made from PPCP /Cast Iron. Bush made from 60mm dia seamless pipe. The pins used are made up of DIA 25 mm of SAE8620 material. The bearings used are of 6205-2RS1 permanent lubricated sealed bearing of reputed brand. All Nut Bolts are G.I / M.S./ Stainless Steel material. Closing Caps are made up of LLDPE / HDPE /M.S. Nylon cap mounted on pins to protect bearings and pins from rain and dust. The circlips for locking are A24. The Equipment shall be Powder coated of at least 30-50 microns thickness using Akzonobel /Berger /Prime make or equivalent.