Mumbai Railway Vikas Corporation Limited Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Mumbai Railway Vikas Corporation Limited - MRVCL Tender
Civil And Construction
Energy, Oil and Gas
Building Construction
Electrical and Electronics
Consultancy Services
Civil And Architectural Services
Electrical Works
Ireps
Opening Date9 Jan 2025
Closing Soon14 Feb 2025
Tender Amount₹ 1,44,06,10,778.6
Costs
EMD
₹ 86,50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Design, Supply, Construction, Installation, Testing And Commissioning Of 1x25 Kv 100/110/25 Kv
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
MRVC_W_241-MRVC-HQ-ELECTRICAL/MRVCLTender No
MRVC_W_241Tender Authority
Mumbai Railway Vikas Corporation Limited ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
123kV SF6 gas-insulated Switchgear (Indoor GIS), Incoming Bay modules 5
-
-
48421852
... More
SF6 gas-insulated Switchgear (Indoor GIS), Transformer Bay Module 6
-
-
40351608
... More
SF6 gas-insulated Switchgear (Indoor GIS), Bus Coupler Bay Module 7
-
-
16318666
... More
123kV SF6 gas-insulated Switchgear (Indoor GIS), BUS PT Module
-
-
19582400
... More
123kV, Dry Type Cable Termination Kit (Plug and Bushing) with Plug-in and Plug-Out Connector as per IEC 62271-209 for GIS indoor switchgear 9
-
-
20529450
... More
Supply and erection of wooden Parmali cleats for 110kV Cable
-
-
460400
... More
Supply and erection of 110KV system TEE to suit zebra 28.62 mm dia. ACSR conductor on both ways (ID-11040) or similar. 12
-
-
23304
... More
Supply and erection of 110kV support insulator.
-
-
295752
... More
Supply, Transportation, erection, testing, and commissioning of 110kV (E) Grade, 13 Single Core, 630 sq. mm. Stranded circular Copper conductor, XLPE insulated, corrugated aluminium/lead sheathed, aluminium round wire Steel tape/armoured, HDPE sheathed and overall graphite coated feeder cable conforming to BIS 7098-Part 3/IEC-60502 - Part2/IEC 60840 or latest.
-
-
3337600
... More
Making cable trench as per the approved drawing and other arrangements for laying the 110KV 630 sq. mm. XLPE feeder cables (1 plus 1 spare), supply & erection of earthing /bonding 14 system, erection of post insulators, supply of material not specifically mentioned elsewhere, laying the cable in the approved route, installation of cable accessories, making cable joint chambers, cable joints and terminations, cable connection to the isolators refilling the trench, etc. testing, obtaining EIG'S permission and commissioning the feeder cables.
-
-
2520529.2
... More
Supply, erection, testing, and commissioning of pre-moulded type Indoor Termination kits suitable for 110kV Grade single core 630 sq. mm. Feeder cable.
-
-
4815576
... More
Supply, erection, testing, and commissioning of pre-moulded type outdoor Termination kits suitable for 110kV Grade single core 630 sq. mm. Feeder cable. 17
-
-
3200800
... More
72.5kV SF6 gas-insulated Switchgear (GIS Indoor), Busbar PT(VT) with Busbar Module.
-
-
28343952
... More
72.5kV SF6 gas-insulated Switchgear (GIS Indoor), Bus Coupler Circuit Breaker Bay Module 19
-
-
16990654
... More
72.5kV SF6 gas-insulated Switchgear (GIS Indoor), OHE Line Feeder Bay
-
-
264863902
... More
72.5kV SF6 gas insulated Switchgear (GIS Indoor), Outgoing Transformer Feeder Bay with GIS VT
-
-
37245040
... More
Supply, Erection, testing, and commissioning 72.5kV, Dry Type Cable Termination Kit (Plug and Bushing) with Plug-in and Plug-Out Connector as per IEC 62271-209 and Its Jointing work + Dummy plug flanges 22
-
-
28021980
... More
Supply and erection of male and female terminators required for GIS Circuit Breakers.
-
-
20979000
... More
Supply and erection of additional cable terminations enclosure for outgoing feeder bay
-
-
14235780
... More
Supply, Transportation, erection, testing and commissioning of 66kV (E) Grade, Single 24 Core, 400 sq. mm. Stranded circular Copper conductor, XLPE insulated, corrugated aluminium sheathed, aluminium round wire armoured, HDPE sheathed and overall graphite coated feeder cable conforming to BIS 7098- Part 3/IEC-60502 - Part 2/IEC 60840 or latest.
-
-
22355000
... More
Making cable trench as per the approved drawing and other arrangements for laying the 66KV 400 sq. mm. XLPE feeder cables (1 plus 1 spare), supply & erection of earthing /bonding 25 system, erection of post insulators, supply of material not specifically mentioned elsewhere, laying the cable in the approved route, installation of cable accessories, making cable joint chambers, cable joints and terminations, cable connection to the isolators refilling the trench, etc. testing, obtaining EIG'S permission and commissioning the feeder cables
-
-
3600756
... More
Supply, erection, testing and commissioning of pre-moulded type Indoor Termination kits suitable for 66kV Grade single core 400 sq. mm. Feeder cable.
-
-
17929740
... More
Supply, erection, testing and commissioning of pre-moulded type Outdoor joint kits suitable for 66kV Grade single core 400 sq. mm. Feeder cable.
-
-
27
... More
Supply, erection, testing and commissioning of 2 Core, 300 sq. mm. Cu cable to connect 27kV/240V, 100 kVA transformer. 29
-
-
66300
... More
Supply and erection of Wooden Parmali wooden cleats for 66kV cable
-
-
501900
... More
Design, supply, erection, testing, and commissioning of Control and Relay Panel suitable for the double circuit, double Transformer, 110KV/27KV, 40/56 MVA TSS, and FP as per RDSO. Spec. No. TI/SPC/PSI/ PROTECT/4050 or latest- For Dahisar TSS
-
-
23543698
... More
Design, supply, erection, testing, and commissioning of Control and Relay Panel suitable for the double circuit, double Transformer, 110KV/27KV, 40/56 MVA TSS, and FP as per RDSO. Spec. No. TI/SPC/PSI/ PROTECT/4050 or latest- For Vasai TSS
-
-
25718688
... More
Supply, erection, testing and commissioning of 25kV single pole Isolator 3150A with accessories
-
-
3382618
... More
Supply, erection, testing and commissioning of 25kV double pole isolator 3150A with accessories. 34
-
-
863660
... More
Supply and erection of 25kV support insulator
-
-
322880
... More
Supply, erection, testing and commissioning of 25kV/240V Auxiliary supply transformers 100 kVA capacity oil type with all accessories.
-
-
1571924
... More
Supply & erection of 25kV drop-out fuse switch assembly for 100 KVA auxiliary supply transformer along with an operating pole. 37
-
-
70856
... More
Supply and erection of LV box assembly for 100 KVA AT. 38
-
-
30512
... More
Supply and erection of tubular aluminium busbar 50X39 mm 39
-
-
104640
... More
Supply and erection of tubular aluminium busbar 80 mm size 40
-
-
562000
... More
Supply and erection of earth screen wire of size 19/2.5 mm.
-
-
41700
... More
Loading, Transportation from the railway depot to the site, unloading, drilling holes, the connection of GI Flat, excavation, and backfilling Burried RAILS in TSS as per RDSO Drawing No. TI/DRG/PSI/E.STN/00001/14/0. (Rail to be supplied by Railways)
-
-
304272
... More
Supply and erection of 110V, 300AH low maintenance lead acid batteries maintenance free.
-
-
1056272
... More
Supply and erection of Battery Charger for 110V, 300AH low maintenance lead acid Battery. 44
-
-
1840644
... More
240V AC distribution board for 25 KVA transformer with 3 position change over switch.
-
-
170848
... More
110V DC distribution board for 25 KVA transformer with 3 position change over switch.
-
-
290104
... More
Supply, erection, testing & commissioning of Wire Rope Electric Hoist Capacity - 5 Ton, Standard lift -5.7 Mtr. (Model - Indef WRH II or equivalent) 47
-
-
856714
... More
Supply and erection of anti-climbing device etc. for LT supply transformer.
-
-
6928
... More
Indicating Board as per Annexure-A. 49
-
-
168880
... More
Office Equipment for TSS as per Annexure-B. 50
-
-
569858
... More
Supply of Spares for Control & Relay Panel as per Annexure-C 51
-
-
7031808
... More
Portable Fire Fighting Equipment as per Annexure-D 52
-
-
321826
... More
Internal wiring of TSS building & Yard lighting as per Annexure-E 53
-
-
2001428
... More
T&P and Equipment/Instruments as per Annexure-F 54
-
-
1481068
... More
Standby Maintenance Spares as per Annexure-G
-
-
31037667
... More
Supply, erection, connecting, testing & commissioning of busbar junction connector etc. as per Annexure-H
-
-
616480
... More
Supply, Transportation & Installation of Armoured Control Cables (Fire retardant) as per Annexure-I 57
-
-
4102800
... More
Supply and erection of Earth system, as per Annexure-J
-
-
3524900
... More
Design, supply, erection testing & commissioning of outgoing feeder arrangement at cross feeder gantry, as per Annexure-K 59
-
-
8436900
... More
Supply and erection of cross feeder/along feeder and connectors as per Annexure-L 60
-
-
852704
... More
Dismantling of Existing Borivali TSS & Dahisar SSP and Handing over to Railway
-
-
2000000
... More
Dismantling of Existing Vasai Road TSS(Part), Naigaon SP, Nallasopara SSP and Handing over to Railway
-
-
2000000
... More
Provision of the capacitor bank (1200 KVAR) and associated equipment (TI/PSI/FC & SR/0100(01/10) with A&C no. 1 or latest RDSO Technical specification for Shunt Capacitor & Series Reactor equipment for Traction Substation.) 63
-
-
17415384
... More
Supply and erection of 25KV feeder Circuit Breakers.
-
-
1347450
... More
Modification in the existing SCADA software at RCC for integration of new TSS, SP, SSP & existing SP/SSPs
-
-
5277500
... More
Supply, Erection, Testing & Commissioning of TSS RTU for GIS TSS at Dahisar & Vasai Road TSS as per RDSO specification no T/SPC/RCC/SCADA/0133 or the Latest.
-
-
3710000
... More
Credit for taking away dismantled/Released steel structure/SPS etc. if found unusable after inspection by the client 67
-
-
-2400000
... More
AMC of Control and Relay Panel - 2 years 68
-
-
4400000
... More
Providing vehicles (Innova/Ertiga/Scorpio) for 3 years
-
-
2700000
... More
Supply of all material, multiple loading/ unloading, storing, installation, fixing, testing & commissioning of 2.0-ton capacity Minimum Energy Efficiency Ratio 4.5 inverter technology split air Conditioner of approved make with Copper Coiling, including connecting Copper piping with 69 thermal insulation & insulated drain piping, core cutting & 2.5sq.mm x 3 core copper cable for indoor to outdoor & supply cable. The cost also included the required length of connecting copper pipe anti- corrosion treated with sleeve, drain pipe 3 core copper cable, and outdoor condenser 'L' type stand/ painted bracket/cage if required as per site condition with all accessories/ GI nut, bolt, hardware, material required for fixing, HD PVC/ Flexible pipe, etc. The cost shall also include the manufacturer's warranty of 2 years for replacing parts against any defects.
-
-
387120
... More
Preparation of design and drawing of Switching station
-
-
1041005
... More
Supply, erection, testing, and commissioning of 25KV, SP 1600Amp CBs with all accessories complete.
-
-
43118400
... More
Supply, erection, testing, and commissioning of 25KV 1500/750/5/5Amp. CT with all accessories complete. 4
-
-
6553344
... More
Supply, erection, testing, and commissioning of 25KV, 1600Amp DP isolator. 5
-
-
8789824
... More
Supply, erection, testing, and commissioning of 25KV, 1600Amp SP isolator.
-
-
3622000
... More
Supply, erection, testing & commissioning of 42KV lightning arrestors with disconnectors.
-
-
1914300
... More
Supply, erection, testing, and commissioning of 25KV/110V PT type-II with DO fuse assembly
-
-
4840225
... More
Supply, Erection, Testing, and Commissioning of control & relay panel for BVI SSP per RDSO Specification No. TI/SPC/PSI/PROTECT/4050.
-
-
10457194
... More
Supply, Erection, Testing, and Commissioning of control & relay panel for MIRA SSP as per RDSO Specification No. TI/SPC/PSI/PROTECT/4050.
-
-
9766919
... More
Supply, Erection, Testing, and Commissioning of control & relay panel for BYR SSP as per RDSO Specification No. TI/SPC/PSI/PROTECT/4050
-
-
10112057
... More
Supply, Erection, Testing, and Commissioning of control & relay panel for NSP SSP as per RDSO Specification No. TI/SPC/PSI/PROTECT/4050.
-
-
10112057
... More
Supply, Erection, Testing, and Commissioning of control & relay panel for NIG SP as per RDSO Specification TI/SPC/PSI/PROTECT/4050.
-
-
9766919
... More
Supply, erection, testing, and commissioning of 25KV, 50/39 mm. dia. aluminium busbar including terminal connectors, etc.
-
-
741520
... More
Supply, erection, testing & commissioning of armoured, PVC insulated. copper conductor cables of various sizes and types for measuring, control & indicating circuits, including cable trays, etc. 15
-
-
2489656
... More
Supply and erection of 25KV support insulators 16
-
-
2573285
... More
Supply and erection of different types of clamps and connectors. 17
-
-
2345390.4
... More
Supply and erection of earthing station/ earth electrode, GI wires, etc. 18
-
-
924750
... More
GI flat 50x6mm
-
-
3594500
... More
Burried Rail and connection with 75x8 mm GI flat to Earth pit as per the SMI No. TI/SMI/0032 Rev.02 (or latest) 20
-
-
721322
... More
Supply, erection, and fabrication of galvanized steel gantries, portals, SPS, etc.
-
-
25910280
... More
Supply and erection of 8 SWG GI wire for earthing. 22
-
-
27000
... More
Supply and installation of firefighting equipment as per Annexure-I 23
-
-
315170
... More
Supply and installation of Name Plates & indicating boards as per Annexure-II 24
-
-
191190
... More
Supply of tools & plants as per Annexure-III 25
-
-
113460
... More
Supply of office equipments as per Annexure-IV 26
-
-
129795
... More
First Aid equipments in box & stretcher as per Annexure-V 27
-
-
23290
... More
Standby and Maintenance spares as per Annexure-VI 28
-
-
1059515
... More
Control room and yard lighting as per Annexure-VII
-
-
2797765
... More
Supply of 66 kV(E) grade 400 sq. mm stranded, circular copper conductor, XLPE 29 insulated, corrugated Aluminium sheathed, Aluminium round wire armoured, HDPE sheathed, and overall graphite coated feeder cable conforming to BIS 7098-Part 3/IEC-60502-Part 2/IEC 60840 or latest.
-
-
24590863
... More
Making cable trench as per the approved drawing and other arrangements for laying the 66KV 400 sq. mm. XLPE feeder cables (1 plus 1 spare), supply & erection of earthing /bonding 30 system, erection of post insulators, supply of material not specifically mentioned elsewhere, laying the cable in the approved route, installation of cable accessories, making cable joint chambers, cable joints and terminations, cable connection to the isolators refilling the trench, etc. testing, obtaining EIG'S permission and commissioning the feeder cables
-
-
9902079
... More
Pre-moulded type outdoor cable termination suitable for 66kV(E) grade 400 sq. mm., copper conductor feeder cable 32
-
-
17740544
... More
Pre-moulded Straight through joints suitable for 66kV(E) grade feeder cable 33
-
-
1002024
... More
150 sq. mm. feeder conductor for feeding to OHE.
-
-
2745000
... More
Supply and Erection of material for termination for feeder conductor with SPS including 9 Ton Cut In Insulator
-
-
280000
... More
Supply, erection, testing, and commissioning of 25kV/240V Auxiliary supply transformers, 25 kVA capacity oil type with all accessories.
-
-
1624160
... More
Supply, erection, testing, and commissioning of 2 Core, 180 sq. mm. Cu cable to connect 27kV/240V, 25 kVA transformer.
-
-
137000
... More
Supply and erection of 25kV drop-out fuse switch assembly for 25 KVA Auxiliary supply Transformer along with an operating pole. 38
-
-
193275
... More
Supply and erection of LV Box Assembly for 25 KVA AT. 39
-
-
90100
... More
Supply and erection of Anti climbing device etc. for LT supply transformer.
-
-
20460
... More
240V AC Distribution Board for 25 KVA Transformer with 3 position change over switch.
-
-
348495
... More
110V DC Distribution Board for 25 KVA Transformer with 3 position change over switch. 42
-
-
725260
... More
Supply & erection of 110V, 200AH low maintenance lead acid batteries set
-
-
1982125
... More
Supply and Erection of galvanised fencing upright 45
-
-
1346346
... More
Supply and Erection of galvanised fencing panel 46
-
-
953680
... More
Supply and erection of galvanised anti-climbing device 47
-
-
221200
... More
Supply and erection of GS gate 1.5m(L) X 3.5m(H)
-
-
60720
... More
Supply & Installation of Modular based Cable sealing & Protection System for Two Locations of SP/SSP Building, Technical details as per Specification attached.
-
-
471612
... More
Modification/Additional SSP RTU at Mira Road & Bhayander SSP as per RDSO specification no. T/SPC/RCC/SCADA/0133 or Latest
-
-
2500000
... More
Modification/Additional SSP RTU at BVI SSP as per RDSO specification no. T/SPC/RCC/SCADA/0133 or Latest
-
-
1550000
... More
Supply, Erection, testing & commissioning of SP/SSP RTU for NIG SP as per RDSO specification no T/SPC/RCC/SCADA/0133 or the Latest 52
-
-
1550000
... More
Indicative maintenance Spares for SP/SSPs 53
-
-
3103503
... More
Annual Maintenance Contract (AMC) of control and relay panel of SP/SSPs for 2 years
-
-
9200000
... More
Preparation of sub-grade by removal of vegetation, excavating of earth or filling of 1 contractor's good quality approved earth if required up to 23cm depth, dressing to required camber, and consolidating with manual/ mechanical compactor/roller including disposal of surplus earth if required outside Rly premises on nominated dumping ground of MCGM as directed by Engineer.
-
-
7500
... More
Earthwork in the bank with contractor's own earth of approved quality and spreading the same in layers not more than 300 mm in loose state and compacting the same layer by layer to achieve 98% of MDD using contractor's own suitable rollers to make the embankment to correct 2 profile as per RDSO guidelines and specification and special conditions of contract. The rates are inclusive of the contractor's own machinery and equipment, labour, procurement of earth loading, leading transporting to the site, unloading, breaking clods, spreading, mechanical compaction, watering, dressing of all slopes and top surfaces to required levels, etc. Note(1) The quarry & soil samples to be got approved by the Engineer in advance of work. (2) This item is operated only where item no. 1 is not operated.
-
-
124200
... More
Excavation in foundations by mechanical means in all types of soils, boulders, WBM roads, including rock not requiring blasting including dewatering by manual or mechanical means etc. as per specifications with all contractor's own machinery and equipment, crossing of track, shoring, strutting, timbering and buttressing with sand /clay bags and all such measures necessary to retain in position the sides of the foundation pit and including backfilling, rolling the excavated 3 material with watering, ramming, levelling the site and disposing off the surplus/unusable earth to low lying area within railway boundary with all leads & lifts as per directions of Engineer. Note: -1. The rates are inclusive of all safety measures to be adopted for protection of structures in the vicinity of works.2. Payment shall be made only for design profile and no payment shall be given for any over cut.3. The excavation shall be done by any mechanical means to suite site conditions etc.4. Disposing off the surplus/unusable earth to outside railway boundary with all leads & lifts as per directions of Engineer will be paid separately under relevant item.
-
-
5421500
... More
Excavation in foundations in boulders including rocks requiring chiselling (blasting is 4 not permitted) by manual and mechanical means including dewatering etc. as per specifications withall contractor's own machinery and equipment, labour, lead & lift, crossing of track, including disposing the rock / stone at suitable nominated locations as per directions of Engineer. Note: -1. The rates are inclusive of all safety measures to be adopted for protection of structures in the vicinity of works.2. Payment shall be made only for design profile and no payment shall be given for any over cut.3. The excavation shall be done by any mechanical means to suite site conditions etc.4. Disposing off the surplus /unusable earth to outside railway boundary with all leads & lifts as per directions of engineer will be paid seperately under relevant item.
-
-
1600000
... More
Excavation for foundations & trenches by Manual means in all types of soils, boulders, WBM roads, including rock not requiring blasting including dewatering by manual or mechanical 5 means etc. as per specifications with all contractor's own machinery and equipments, crossing of track, shoring, strutting, timbering and buttressing with sand /clay bags and all such measures necessary to retain in position the sides of the foundation pit and including backfilling, rolling the excavated material with watering, ramming, levelling the site and disposing off the surplus/unusable earth to low lying area within railway boundary with lead & all lifts as per directions of Engineer
-
-
2640000
... More
Extra for disposing off surplus excavated earth or unusable/unsuitable 6 earth/muck/debris etc. outside Railway Boundary with all contractor's tools, plants, equipments and labours with loading, unloading, transport etc. complete including all lead & lift as per the direction of Engineer in charge.
-
-
891000
... More
Filling contractor's murum/good quality granular material as specified in Railway 7 Specification without stacking directly in plinths and floors, including platforms etc. complete including watering and ramming, all contractors labour, equipments, materials, crossing of tracks, lead & lifts etc. complete. Payment will be made based on cross-section area. Rate is inclusive of royalty to be paid to state government.
-
-
450000
... More
Providing and Fixing temporary barricading to enclose construction area of minimum 2.40 meters high with mild steel angle frame of size 75 x 75 x 8 mm and GI corrugated sheet of 0.5 mm thickness as per the approved drawing and as per specifications, including foundations. The rate includes one coat of red oxide primer before erection, two coats of approved paint & shade (including MRVC logo at every 15-20 metre) as per the specifications, erecting in position, welding / bolting. The rate includes cost of all materials, including fixtures, bolts, painting, labour, transportation, leads, 8 lifts, crossing of tracks, etc., complete. As directed by the engineer. Note: 1. Payment schedule: a) 60% payment will be released on installation as per approved drawing. b) 10% of the payment will be made for satisfactory maintenance of barricading after six months including one coat of painting. Additional 10% will be paid after satisfactory maintenance after 12 months including one coat of painting. c) Balance 20% payment will be made on completion of work at site as certified and directed by Engineer-in Charge and on removal & clearing of site. 2. Released materials will be the property of contractor after satisfactory completion of work. Contractor has to remove and clear the site after work is over.
-
-
5250000
... More
Providing cast-in-situ vertical bored piles of 600 mm dia in design mix reinforced cement concrete of M-35 Grade with 20 mm graded machine crushed stone aggregate through all types of soils, boulders, soft rock and hard rock including boring, chiseling and socketing in rock with all contractor's labour, material (except reinforcement steel), tools and plants, chemicals, admixtures, all lead and lift, crossing of tracks etc. as per specifications, weigh batching of ingredients, mechanical mixing, placing, providing permanent / temporary liners (payment of permanent liners will be made separately) disposal of excavated materials within railway premises as per direction of Engineer-in-charge, levelling of ground, chipping off pile top to remove laitance concrete above cut-off level including cutting and removing liner above cut-off level etc. complete as 9 per direction of Engineer-in charge. (Minimum Cement content 400 kg/Cum and Maximum Water Cement ratio 0.40) Notes: 1. Steel reinforcement and permanent MS liners will only be paid separately. 2. Length of piles shall be measured from the cut off level upto the founding level. 3. Rate is inclusive of chloride free admixture such as super plasticizer and cover blocks. 4. The rate is inclusive of chipping of pile top to remove laitance and concrete above cut off level. 5. The rate is inclusive of any levelling of ground or filling required to make working platform for piling and removing the platform and cleaning of site after piling work to its original condition. 6. No empty boring shall be payable. 7. The guidelines for deciding depth of embedment are given in specification. 8. Minimum depth of embedment in rock shall be as per approved drawing. 9. If piles of 700mm dia is to be used the quoted rate for 600mm dia pile as per above item will be increased by =(700)^2/(600)^2= (7/6)^ 2 times i.e. 1.36 times.
-
-
5400000
... More
Supplying, fabricating, fixing, driving and providing mild steel liners 6 mm to 8 mm thick as per directions of Engineer-in-charge and permanently left in place for 600 /700 mm dia RCC 10 pile with bending to shape, welding, with all contractor's materials, labour, tool & plant etc. complete as per specifications and direction of Engineer-in-charge Note: 1. Liners shall be provided for full height of pile or upto the depth of refusal of liners including the height of pile to be chipped off or as per the instructions of the Engineer. Liner shall be paid only upto cut off level of pile. Liner above cut off level, if initially provided, shall not be paid. Contractor will be allowed to take away liner-wastage above cut off level. 2. Nothing extra shall be payable for any wastage, fabrication tolerances etc. 3. Depth of liner shall be decided by Engineer-in-charge at site and his decision shall be final and binding on the contractor.
-
-
6000000
... More
Conducting low strain pile integrity test on RCC bored piles of any dia., using standard equipment confirming to ASTM- D5882. The rate includes submission of reports in 4 copies including one soft copy.
-
-
15000
... More
Load testing on any pile by Dynamic load test as per specification including making all 12 arrangement, machineries like Piling Winch, Chisel, covering plate on test pile, Emitter, Reflector and other instruments required for displacement measuring tool and plant, labour etc. complete & submitting the test result as required in acceptable form to the satisfaction of Engineer-in-Charge.
-
-
93740
... More
Providing hand packed rubble soling in foundations, etc. with all contractor's stone, material, labour, tools & plants etc. including all lead & lift, crossing of track, transportation etc complete as per Railway's specifications and direction of Engineer-in-charge.
-
-
2470000
... More
Providing and laying in situ M15 (nominal mix 1:2:4) grade PCC leveling course in 14 foundations/ in plinth area with broken stone aggregate of size not more than 40 mm of approved quality including formwork wherever necessary, dewatering, compacting, curing etc., complete with all contractors materials, batching, mixing transporting and placing, as directed by the engineer including all lead and lift etc., complete (Minimum Cement content shall be 260 Kg per cum)
-
-
6800000
... More
Providing and laying ready mix concrete (RMC) M-20 grade PCC with well graded machine crushed stone aggregate of size not more than 20 mm of approved quality with minimum cement content of 340 Kg/cum & maximum water cement ratio of 0.4, including form work wherever 15 necessary.Note: 1. Rate is inclusive of Chloride free admixture such as super plasticizer. 2. Only construction joint shall be permitted. 3. Form work shall be approved by Engineer- in -charge before use. 4. The contractor shall install automatic batching plant of suitable capacity or use RMC for the concreting work, except for the location and components of work permitted by engineer's in charge for use of mechanical mixer at site. For such concreting without RMC, deduction at the rate of Rs. 500 per cum will be made from payment
-
-
14400000
... More
Providing RCC, ready mix concrete (RMC) M35 grade with 20 mm size graded machine crushed stone aggregate with minimum cement content of 400 Kg/cum & maximum water cement ratio of 0.4.Note:- 1. Rate is inclusive of Chloride free admixture such as super plasticizer. 2. Only construction joint shall be permitted. 3. Form work shall be approved by Engineer- in -charge before use. 4. The contractor shall install automatic batching plant of suitable capacity or use RMC for the concreting work, except for the location and components of work permitted by engineer's in charge for use of mechanical mixer at site. For such concreting without RMC, deduction at the rate of Rs. 16 500 per cum will be made from payment. 5. Steel reinforcement will be paid separately. 6. Rates are excluding of permanent shuttering and permanent form work in case of item no. 14(d) for deck slabs/ extension to deckslabs of FOBs, elevated decks, skywalks, staircases, etc. where the decking sheet/ steel sheet are provided for safety in OHE and crowded area in this case decking sheet/steel sheet paid separately. 7. Rates are inclusive of temporary form work of approved quality and material for temporary side/bottom shutterings, staging and scaffolding, dewatering, placing using pumps/placer boom/crane & bucket, compaction, finishing the surface and curing of concrete with all contractors tools, plants, labours and materials of approved quality, all lead and lift, crossing of track, etc complete as per specification & direction of Engineer -In-Charge.
-
-
32250000
... More
Providing and applying epoxy paint of approved quality as per CECRI, Karaikudi Integrated 4 coat system on exposed surfaces of concrete structures confirming to specifications as mentioned in technical specifications.
-
-
120000
... More
Providing two coats of coal tar epoxy of anticorrosive coal tar epoxy Hi Build compound over one primer coat of epoxy zinc phosphate with all lead and lift including all contractor's labour, material, tools & plants etc. Complete
-
-
15500
... More
Providing and fixing machine moulded factory made Precast cement concrete solid block Grade C (5.0) with block density more than 1800 Kg/cum in substructure and super-structure 20 including platform walling, conforming to IS: 2185 (Pt. I) as per approved drawing including hoisting and setting in position with cement mortar 1:3 including centering, shuttering, curing and finishing with all lead and lift including crossing of tracks with all safety precautions for working close to track with contractors labour, materials, tools and plants etc complete to the specification & finish as directed by engineer in charge.
-
-
9600000
... More
Cutting of trees more than 60 cm girth including depositing the wood at nominated 21 locations with loading, transporting etc. The contractor shall obtain necessary approval from concerned authorities for cutting/transplanting trees. The required payment to concerned authority for obtaining permission will be made by MRVC.
-
-
19200
... More
Transplanting of existing trees by uprooting, shifting & placing in pits excavated of suitable size within one KM distance and refilling with manure & soil and maintaining the plant for 12 22 months. (i) 40% payment will made after proper transplanting of trees. (ii) 30% payment will be made after maintenance of 6 months for survived trees. (iii) 30% payment will be made after maintenance of one year for survived trees. The trees transplanted under this item will not be considered for payment under item 21 for cutting.
-
-
85000
... More
Obtaining administrative approval from tree authority for the cutting/transplanting of trees coming in the way of proposed work including preparation of drawing showing the details of 23 trees, processing for the sanction etc. complete. Note:- 1. Fees for obtaining permission of tree cutting/transplanting etc. will be paid separately by MRVC. 2. The required permission/all formalities from concerned tree authority will be obtained by contractor. 3. One job means permission for tree cutting/transplanting in all locations of the project as applicable and specified by Engineer 24
-
-
96000
... More
Credit for taking away already cut wood.
-
-
-1980
... More
Supplying, fabricating, erecting and fixing in position M.S. structural members such as Fencing post and frame, gates, grills, ladder, cable tray, tree guard etc., with all necessary fittings wherever required using new M.S. sections like RSJ's, angles, plates, flats, square rods, wire mash 25 etc. conforming to IS 2062 grade "A" with contractor's materials, including cutting, bending, welding, bolting, riveting etc. (Payment shall be made as per sectional weight given in steel table). No extra payment shall be made for welds, bolts, rivets used in the work and no deductions for holes and no addition for welds bolts etc., shall be made. Note: Structural steel with hot dip galvanization of steel confirming to RDSO specification No. ETI / OHE /13 (4/84) and minimum average weight of zinc coating of 1000(g/m2).
-
-
8800000
... More
Supply fabrication and Erection of Square Hollow Section/Rectangular Hollow Section & Circular Hollow Section structural steel conforming to IS 4923 and IS 1161 respectively of YST 310 grade of Tata Structura or JSW or similar equivalent and thickness as indicated in drawing including required profile, shape and using structural sections including anchor bolts fabricated/ procured to 26 the required profile and shape as called for, hoisted, installed in position including all cutting, welding, grinding & all operations, necessary templates and zigs, adequate temporary supports, scaffolding, staging, etc. including all tests on material required as per specifications. This item is primarily for roofing and its supporting framework for FOBs, Skywalks and column and roofing of cover over platforms etc. as indicated in approved drawings. Every precaution to be taken against rusting of section. Necessary precaution to be taken during welding to avoid distortions and residual stresses. Note: 1. Payment will be made for standard weight of structural steel sections. 2. Rate includes welding, bolts, washers, nuts, tools & plants, loading & unloading, transport & fuel, labours, all lead and lift, crossing of track if required etc. and item is payable as per weight assessment based on standard sectional weights of members (weight of weld, bolts, washer & nuts etc shall not be considered for weight calculation for payment). Nothing extra will be paid for Railway traffic block working. 3. Rate of painting is included in this item.
-
-
130000
... More
Providing and placing in position high yield strength deformed TMT bars of Fe 500D grade procured from primary manufacturer such as SAIL, JINDAL, TISCO or Rashtriya Ispat Nigam Ltd. conforming to IS 1786 of all diameters in RCC works. The rates includes supply, loading, unloading, 27 transporting to site, cutting, bending, hooking, placing and fixing in position with contractor's galvanized binding wire of 18 SWG, cover block of same grade concrete, labour, tools & plants all lead & lift, crossing of tracks etc. as per the approved drawings as directed by the Engineer.Note: 1. The item will be paid only for quantities used actually excluding overlaps other than designed and as indicated in technical specifications. 2. The wastage, cut pieces shall be taken away by the contractor and the same will not be paid.
-
-
35000000
... More
Providing and fixing on previously erected purlins or wall frame work, colour bond (Zincalume/galvalume) sheet of 0.5mm TCT with feed material of 0.45 mm BMT of XRW steel-high tensile with minimum 550 MPA yield strength as per specifications of Tata BlueScope or equivalent make with corrugated or Trafford design approved by Engineer-in-charge for roofing, walling, etc. The Polyester coating shall be 20 micron (DFT) on exposed surface and 5 micron (DFT) on unexposed 28 surface over 5 micron (DFT) of polyester primer on both surfaces on CRCA steel with hot dip coating of 150 gsm mass alloy of 55% Aluminum + 43.5% Zinc and 1.5% silicon (AZ 150) as per ASTM A792M. The sheets shall be fixed with SDST Screws confirming to AS 356 class 3, with EDPM washers. Fixtures used for fixing the sheets shall be as per manufacturer's specification. Rate is inclusive of overlaps, all fixtures like bolts, washers, screws etc. complete as per drawing, with all contractor's material, labours, tools & plants, lead & lifts, crossing of tracks, transportation, machineries, consumables etc. complete as directed by Engineer-In-charge.
-
-
80000
... More
Parapets, walkways, gates etc, and all other locations made of stainless steel of SS 316 consisting of tubes of various size and other sections such as, flats, solid, square, circulars bars, box sections as called for etc. arranged in verticals and horizontals with spacing as required and anchored to sides of steps/slab etc, handrail and all other stainless pipes(wall thickness, minimum 29 2mm) fixed to stainless vertical through SS plates/flats as per approved drawings incl. Approved brackets and fittings, anchoring arrangements. all fixing accessories, all cutting bending, welding, grinding, drilling, tapping, handling, hoisting aligning temporary connections including completely fixing the steel railing at site and all other incidentals including approved buffing to stainless steel members as directed by the Engineer In charge etc. complete. The hand railing and other members shall be bent to correct profile and shape as required by Engineer-In-Incharge.
-
-
477000
... More
Providing and fixing 18-20 mm thick machine cut granite stone slab of approved colour for flooring laid on 20mm thick 1:3 cement sand mortar and jointed with epoxy pigments to 30 match the colour of stones and as per the approved pattern using approved binding agent with all contractor's material, labour, tools and plants with all lead and lifts, transportation etc complete.Note: Payment for edge moulding, groove cutting and treatment to granite stone such as flaming, leather polish, etc. to make it non slippery with all contractor's labour, tools, plant, consumable etc. complete with all lead and lift is done seperately under relevant item
-
-
140000
... More
Providing, Supplying and fixing/laying in position Kota stone slabs 40 mm thick in 31 flooring for passage, platform surfaces, etc. of approved quality, good polish including Titanium oxide waxing, etc. laid over 20mm thick base of 1:3 cement mortar and jointing with cement slurry mixed with pigments to match the shade of tiles with all contractor's own labour, materials, all leads & lift etc. complete. The rate also includes provision of rounding edges wherever required.
-
-
2275000
... More
Supplying and fixing vitrified tiles of size 600 x 600 mm (H & R., Johnson, Marboniteseries 1⁄2 or similar equivalent of approved colour, shade, design, pattern in flooring and dado over 20 mm thick cement mortar 1:3 and joints with white cement slurry mixed with pigment to match with the shade of tiles etc. complete as directed by Engineer. Rate includes contractor's materials, tools & plants, loading & unloading, transport & fuel, labours, all lead and lift, crossing of track if required etc. complete. Note: 10% payment of quoted rate shall be paid only after certification by Engineer for proper joint finish & levelling of tiles.
-
-
1575000
... More
Providing, Supplying & fixing best quality and superior finish anti slip of size 300 x 300 mm (H. & R. Johnson, NITCO or equivalent) ceramic tiles of approved colour, shade, design, pattern, 33 in flooring on 20 mm thick cement mortar 1:3 mix and joints with white cement slurry mixed with pigments to match with the shade of tiles with all lead and lift complete. Rate includes all contractor's materials, tools & plants, loading & unloading, transport & fuel, labours, all lead & lift, crossing of track if required etc. complete. Note:- 10% payment of quoted rate shall be paid only after certification by Engineer for proper joint finish & levelling of tiles.
-
-
143000
... More
Supply & fixing glazed ceramic tiles best quality of size 300 x 200 mm (H. & R. 34 Johnson, NITCO or equivalent) of approved colour, shade, design, pattern, in dado on 12 mm thick cement mortar 1:3 mix and joints with white cement slurry mixed with pigments to match with the shade of tiles with all lead and lift complete. Rate includes cost of all materials, labour, T & P etc. complete.
-
-
150000
... More
Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end) :
-
-
3462
... More
Providing and fixing angle cock chromium plated of jaguar make code No.053/Marc Series No. MOR-1060A as approved by engineer in charge.
-
-
18312
... More
Providing and fixing stop cock chromium plated of jaguar make code No.069 / Marc Series No. MOR-1040 as approved by engineer in charge.
-
-
19446
... More
Supply and fixing BIB TAP 15 mm dia having ISI mark as per requirements including all material, labour, T & P etc. complete for all floors and height as directed by engineer in charge.
-
-
24255
... More
Making connection of GI distribution branch with GI Main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete
-
-
2250
... More
Supplying, laying, joining G.I. pipes complete with G.I. fitting for external work (outside building) including excavation as required and filling in the trenches after testing the joints.
-
-
171810
... More
Providing, fixing and jointing 15 mm dia G.I. pipe with fittings of approved special heavy quality (C-class) having weight 1.44kg/m for concealed piping inside the building including 41 making groves in masonry work, concrete up to required depth, painting all pipes and fittings with anti-corrosive bitumen solution and wrapping with high quality bitumen hessian cloth all around the pipe and fittings, finishing with reach mortar (1:3) to make good the walls & floors, with all labours, materials, T&P and all lead & lift etc. complete as directed.
-
-
90900
... More
Providing and fixing PVC "Soil, Waste and Rain Water" (SWR) Pipes Single socketed including making joints air and water tight with T- shaped rubber rings and rubber lubricants fixed with minimum 4 clips per pipe length (clips will be paid separately).
-
-
73380
... More
Providing and fixing PVC bend with Access Door" (Door on TOP in elevation) including making joints air and water tight with T-shaped rubber rings and rubber lubricants.
-
-
6944
... More
Providing and fixing "pipe clips" with raw plugs and screws including Jumpering in wall and making good the same.110 mm dia.
-
-
5700
... More
Supplying, hoisting and installing heavy density polythene water storage tanks (Sintex or equivalent) of various capacities made by using only FDA approved grade of polythene. The tank 45 shall be moulded to Seamless perfection by rotational moulding process. The tank shall be of cylindrical and vertical type with CI cover as approved by Municipal Corporation for top lid having locking arrangement; The tank shall be provided with suitable inlet and outlet. PVC flocks with brass rocks and check nut system. S No. Item No Description of Item Unit Qty
-
-
99000
... More
Providing and fixing white vitreous China W.C. PAN 580 mm size of "ORISSA PATTERN" with 100 mm white vitreous china 'P' trap/ 'S' trap. The item includes cost of W.C. Pan, cement, sand, transportation, labour, T &P and all leads and lifts etc complete.
-
-
64722
... More
Providing and fixing European type W.C. pan, wall mounted with integral trap, Cera make. The rate includes cost of all materials labours, transportation, lead, lift, etc. complete as directed by engineer.
-
-
48548
... More
Supplying & fixing feather touch flushing cistern of 10 ltr. capacity moulded with high 48 impact polystyrene, functional parts made of engineering grade ABS, nylon, acetal, superior quality rubbers ( having built in wall brackets 15 mm bore mosquito proof over flow pipe 100 mm in length including 25 mm diameter PVC flushing pipes to flushing cistern & sanitary fittings. The rate includes all labour, tools & plants, lead & lift, finishing etc. complete.
-
-
18954
... More
Providing and fixing 450 mm x 300 mm (flat back) wash hand basin white vitreous china with fittings such as C.I. brackets painted white one 15 mm C.P. brass pillar with foam water 49 tap, 32 mm diameter rubber plug, C.P. brass chain, 32 mm C.P. brass waste of standard pattern, 32 mm diameter C.P. bottle trap and union complete, including making good the walls etc. where required. The item includes cost of all material, cement, sand, transportation, labour, T & P and all leads and lifts etc complete.
-
-
58656
... More
Providing and fixing stainless steel grating for floor/nani trap with cost of all materials, labour, T&P and all lead &lifts etc complete
-
-
348
... More
Providing and fixing C.I. FLOOR TRAP with 100 mm inlet and 100 mm outlet of self 51 cleaning design with C.I. screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls floor etc. The item includes cost of all material, cement, sand, transportation, labour, T &P and all leads and lifts etc complete.
-
-
4000
... More
Providing, laying and jointing SALT GLAZED STONEWARE PIPE including S.W. specials 52 complete with gasket of hemp or spun yarn neatly finished with grout of cement mortar (1:1 mix) perfectly air and water tight including testing of joints. The item includes cost of all material, cement, sand, transportation, labour, T & P and all leads and lift etc. complete.
-
-
38590
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement: 2 fine sand) including testing of joints etc. complete.
-
-
34101
... More
Providing Cement plaster 12 mm thick over masonary walls/ concrete surfaces in all position in single coat in 1:4 mix of cement & sand with Ready Mix Mortar. NOTE:- 1. Ready mix plaster material of approved brand available in market manufactured with well graded & high quality 54 river sand along with approved brand of cement, water soluble additives and fiber shall be used for plaster. 2. Mechanical mixture shall be used for mixing water in ready mix plaster. 3. In exceptional circumstances with prior approval of Engineer in charge, if site mix cement mortar with natural river sand is used for plaster in place of ready mix material. 4. Only natural river sand shall be used for plaster.
-
-
1938510
... More
Providing Cement plaster 20 mm thick over masonary walls/ concrete surfaces in all position in two coats in 1:4 mix of cement & sand with Ready Mix Mortar. NOTE:- 1. Ready mix plaster material of approved brand available in market manufactured with well graded & high quality river 55 sand along with approved brand of cement, water soluble additives and fiber shall be used for plaster. 2. Mechanical mixture shall be used for mixing water in ready mix plaster. 3. In exceptional circumstances with prior approval of Engineer in charge, if site mix cement mortar with natural river sand is used for plaster in place of ready mix material, payment will be made at 75% of accepted rate of this item. i.e. rate will be reduced by 25% . 4. Only natural river sand shall be used for plaster.
-
-
2671200
... More
Providing waterproofing treatment with waterproof plaster of 25mm thickness having cement mortar (1:3) on top of which china mosaic on terrace slab as per following specification, 56 preparing surface by scrapping and brushing so as to remove all loose materials etc., and compete washing of the surface with water, providing cement concrete to proper slopes as directed by the Engineer. Applying one priming coat of polymer based waterproofing compound of approved quality mixed with cement (1 Kg. of water proofing compound and 2 Kg. of cement should cover an area of 2.8 Sq.m. Laying broken china mosaic (broken pieces of china glazed tiles) of approved colour set in 25mm thick cement mortar 1:3 mixed with water proofing powder of approved quality to correct levels and slopes and joints finished by pouring cement slurry and brooming them down. The tiles shall be closely packed such that china mosaic covers at least 90% of slab area. The above treatment shall be provided on the parapets/any other wall above the floor level and the junction between the walls and the parapet rounding of, to the shape of an arc of a curve. Curing of the flooring continuously for 10 days so as to render the surface hard. Cleaning the china mosaic tiles of all dust and stains includes disposal of debris released from this work. Ponding test to be carried out for the 48 hours to check any leakage & that is to be rectified immediately. The rate includes cost of all materials, labour, T&P and all lead & lift etc. complete as per specification & special condition of contract. Note:- levelling course cement concrete will be paid separately.
-
-
1046040
... More
Providing and applying 10 to 15mm thick water resistance premixed/ ready mixed render's of Roofit industries Ltd or similar. The specifications of the premixed internal plaster shall be as under-1. Colour-Gray2.Binder- 43 grade Ordinary Portland cement.3. Fillet- Graded sand conforming to BS 1199. 4. Additives- Water soluble additives to improve workability, water retention, durability and adhesion strength. 5. Water demand- For hand application : apprpx 14-16% Or 7- 57 8L/50kg bag. 6 Max.aggregate - size 2.6 mm. 7. Pot Life- Approx 1 hour. 8. Composition- 2.30 kg per sqm per mm thickness. 9. Particle Consumption : Approx 23.0 kg/sqm for thickness 10 mm. 10. Adhesion to concrete 0.75 N/sq.mm.( 1 N/sq.mm) 11. Compressive strength:>10N/sq.mm. 12 Chloride Content:<0.01%.13. Date of pack: Not more than 6months. NOTEThe ready mix plaster in bags shall be first supplied to the SSE/W in his godown from time to time . The material shall be got approved by the contractor from the railway Engineer before use on work. Transportation to site has to be done at contractor's own cost and payment will be made for area of work done and not for no. of bags supplied.
-
-
265500
... More
Demolishing all type of brickwork, stone work, cement concrete including requiring use of chisels/mechanical drills/pavement breakers/rock splitters etc. for demolishing at all locations 58 with all contractor's labours, tools & plants, scaffolding etc. complete with all lead and lift for disposing demolished material with in Railway area. The usable demolished material will be used in filling as required. The surplus material will have to be disposed outside Railway premises for which payment will be made in the relevant item (Weight assesment for payment will be as per specifications).
-
-
272391
... More
Dismantling steel work, upto a height of 10 m with all contractor's labours, tools & plants, machines, scaffolding etc. complete with all lead and lift. The contractor will take all safety 59 precaution and remove the material immediately.The released material will be taken away by contractor as directed by Engineer-in-charge. Credit for taking away of dismanteled steel will done in item no. 80 below.Note:Payment will be made based on standard weight of structural steel sections used in dismantled structure after 20% reduction for loss of section due to corrosion.No actual weighment will be done for dismantled steel.
-
-
53720
... More
Removing G.I. sheet in walls and roof including ridges with all contractor's labours, tools & plants, scaffolding etc. complete with all lead and lift. The contractor will take all safety 60 precaution and remove the material immediately from yard/platform area and stack the material at suitable locations not affecting train and commuter safety & movements. The released material will be deposited at Railways scrap yard as directed by Engineer-in-charge. Transportation will be paid separately in relevant item.
-
-
1900
... More
Disposing off earth bricks and other unusable debris of all kinds outside railway premises including labour, loading, unloading, transportation, all lead & lift, T&P etc. Complete.
-
-
55000
... More
Loading/Unloading G.I. sheets, rails, joists, build up sections, angles, CI. Ductile pipes, 62 A.C. Pipes or G.I. pipes RCC/PCC beams / slabs and other miscellaneous ironwork or wood work including lead upto 50m and stacking properly into / from trucks, trailers or wagons with all contractor's labours, tools & plants etc complete with all lift.
-
-
4720
... More
Providing fully furnished porta cabin with partition & urinal on hire of minimum size 9.14 m x 3.05 m fully wired, one Table with Chair, two Visitor chairs, small Almira, one side table, AC , computer, printer, stationaries etc. in one side of partition and 1 big table with eight chairs on other side of partition as directed by Engineer. Rate includes contractor's material, labour, transportation, lead & lift, etc. complete. The cost also includes maintenance, security, electricity & cleaning during contract period.
-
-
63
... More
Provision of Multipurpose assistant for implementation of safety and traffic management plan.
-
-
1274400
... More
Finishing exterior surface of walls at all locations with one coat of Birla White Cement 65 as a primer coat and two coats of exterior weather shield (acrylic emulsion paint) of approved brand such as Apex paint- Asian Paint or equivalent of approved color and shade with all contractor's materials, labour, scaffoldings, T& P, and brushes, water charges etc. complete as per the specifications with all lead and lift, to the satisfaction of the engineer in charge.
-
-
687050
... More
Providing and applying plastic emulsion paint in interior of building of approved brand, 66 colour and shade to surfaces in minimum two or more coats, if require to give smooth surface inclusive of scaffolding, preparing to surfaces including priming coat with all lead & lift etc. complete as directed by engineer. The rates includes cost of all materials, labour, T & P, lead, lift etc. complete.
-
-
1020840
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
-
-
579690
... More
Supply and fixing glazed aluminium-sliding/fixed windows shutters as per approved drawings. Rate includes all labour, materials, lead, lift, fixing etc., complete consisting broadly of 68 following: 1. The frame of sliding window shall be aluminium hollow sections size 100 mm x 40 mm x 2.00 mm thick. 2. Channel for the three track shall be of size 92 mm x 29.5 mm x 1.2 mm thick over the aluminium frame. 3. Sliding shutter shall be of size 50 mm x 20 mm x 1.5 mm thick with 5 mm glass sheet panel plain/etched (50%) with all necessary accessories such as PVC liner.
-
-
864600
... More
Supply and fixing aluminum powder coated ventilator for toilets made out of Jindal (series A). Frame size: 600 x 600 made out of section 44.28 x 44.46 x 3 mm thick. Glass: 4 mm frosted glass to be used.
-
-
57460
... More
Supplying and fixing ornamental aluminium grills with aluminium frame as specified the aluminium grills shall be of RG-3 model and dimension of which is 70 mm x 90 mm aluminum frame size 15mm x 25mm x 1mm thick etc with all material labour transport cost etc.
-
-
90900
... More
Supplying and fixing in position 40 mm archid ply, assam flush door with 1.5 mm laminated Royal touch or approved quality on both faces, single leaf shutter with solid core block board with teak wood bedding all around.
-
-
483240
... More
Supplying and fixing superior quality mirror 5 mm thick with aluminum powder coated 72 frame at locations as directed by engineer including cutting of masonry & its finishing if requires. The rate includes all material, labours, fixtures, all lead and lift, tools, plants etc. complete. (minimum size of mirror with frame 0.90x1.00 m )
-
-
32040
... More
Providing and fixing door closure of Hatim Hardware or any other similar door closer & Fittings series No.H-061-H including necessary fittings & accessories as approved by engineer. The rate includes cost of all materials, labour, T & P and all lead & lift etc. complete.
-
-
62780
... More
Supplying & fixing powder coated decorative Aluminium rods for curtains of 25 mm 74 diameter with ornamental capping of rods on either ends with decorative powder coated aluminium caps. The rate includes cost of all material, labour, T & P all leads & lift etc. complete as per the specifications and approved drawings. The materials colour & design of curtain rods shall be got approved by Railway Engineer before use on work.
-
-
2700
... More
Existing outer frame of windows with male, female Welcro tape system minimum 75 50mm wide. The female shall be suitably fixed to existing outer frame of window by adhesive like fevicol & male to the frame. Male shall be fixed on the nylon mosquito net along the perimeter. Rate is inclusive of all materials, labour, lead, lift, transportation etc .complete.
-
-
12880
... More
Supplying including frame of size 125x75x4 mm, hardware stainless steel hinges of 4 inches 3 nos. & external and fixing FRP DOORS delux machine moulded of approved quality steel cylindrical lock push button type necessary hold fast as approved by Engineer-in-charge with all lead and lift etc. complete.
-
-
114430
... More
Providing and fixing M.S. grill, gate, ladder, railing etc. of approved design including fixing to the wall and steel window and painting two coats of approved quality oil paint and shade 77 over primary coat of Red Oxide Zinc chrome primer confirming to IS: 2074 as directed by Engineer. Area may have straight or curved section. Payment for curved section will also be on actual weight used. Rates includes contractor's material, tools and plants, loading & uploading, transport & fuel, labours, all lead and lift etc. complete. Note: - The item will be paid only for quantities used actually. The wastage, cut pieces shall be taken away by the contractor and the same will not be paid.
-
-
14500
... More
Supplying and fixing particle Board false ceiling of Anchor Tiles or equivalent make at required height as per following specification. The grid of the false ceiling shall be Aluminium T- section of 35 mm x 25 mm x 18 G at 60 cm c/c in both direction sand suspended from ceiling with 12 78 mm dia. M.S. bar anchors with cleat and flat iron clip. Aluminium L-sections of size 25 mm x 25 mm x 18 G shall be provided at the ends along the junction of the false ceiling and walls and joined suitably 12 mm thick ceiling tiles of Anchor make or equivalent of size 60 mmX60 mm shall be plated and fixed in position in each panel with screws. The dimension of the end panels may vary according to overall size of covering.
-
-
1799920
... More
Credit for taking away dismantled steel work with all contractor's labour, transport, 79 loading, unloading with all lead and lift, etc. complete.Note:Weight calculation for Payment will be done based on standard weight of structural steel sections used in dismantled structure after 20% reduction for loss of section due to corrosion.No actual weighment will be done for dismantled steel.
-
-
-1217625
... More
Supplying and fixing glossy C.C. interlocking paver blocks 60 mm thick of approved make, shade and pattern laid on sand bed of average 50 mm thick. Sand bedding is to be compacted with mechanical compactor etc., as directed by the engineer.
-
-
388500
... More
upplying and spreading machine crushed stone ballast confirming to RDSO 81 specification No. IRS-GE-1 of Jan' 2004 in min. 75 mm thickness spread over clean sand bedding confirming to IS: 383 of min. 25 mm thickness and leveling, ramming and cambering to the satisfaction and as directed by the Engineer. 82
-
-
3628392
... More
Providing Chain link fabric mesh of size 50 x 50 mm made of G.I. wire of 4.00 mm dia
-
-
269100
... More
Demolishing RCC work including cutting and stacking of steel bars and disposal of unserviceable material within 50m lead. (Extra payment for scraping, cleaning and straightening of bars to be made separately)
-
-
214892
... More
Providing and fixing in position collapsible steel gate with central strips to minimise the gape fabricated with 1/4" channel and 1/4" x 3/16" steel strips (3" gap) in between rebelled and 84 rolling over top and bottom channels including handles locking arrangements etc. complete with all fixtures and painting with red oxide primer and two coats of approved paints etc as directed by engineer, rates includes contractor's materials, tools and plants, loading & transport & fuel, labours, taxes, duties, octroi, all lead and lift etc.
-
-
465630
... More
Supplying and fixing of cement concrete Kerb stone blocks of size 500x400x150 mm thick in C grade M-30 along with all lead and lift and as per the direction of Engineer in-charge.
-
-
6660
... More
Providing multiwall 6 mm type Polycorbonate sheet similar to TUFLITE make, in north 86 light and claddingon iron frames/purlins with contractors stichingbolts hookbolts, crankboltscoach screws nutslimpets , GI and bitumen washers, etc complete as per drawing with all contractors labours , tools & Plants, machineries , consumables etc. completeas directed by Engineer - in charge.
-
-
33640
... More
Preparing and submitting to Railways, 1 sets of completion drawings (all detailed 87 drawings) after completion of work, on polyester based tracing films (min. 75 microns thick, one side mat of superior quality) in black indelible ink duly incorporating all additions and alterations in red ink, along with a copy of the same on a CD, 6 blue prints and 1 copy on RTF.
-
-
3340
... More
"Providing following machine on hire basis for speeding of the work during block/non- interlocking railway work as directed by engineer in charge at site with all contractors machinery, 88 fuel, operator, crew, assisting labour complete. The rate of hiring the machinery will be per machine per shift per block. One shift means working of 8 hrs or part thereof. The item will be operated during block or Non-interlocking only for the purpose of speeding up the work, for early completion of the work during the block and is intended to be operated to provide additional resources over and above normal resources. The requirement of any machinery for executing a particular item during or prior to block is covered in the rate of relevant items only. The item will be operated at the sole discretion of the engineer."
-
-
80224
... More
Design, Engineering, installation, testing& commissioning of solar light pipes (Tabular) as per specifications
-
-
302480
... More
Lorrying out shifting, hauling of free rails, rail panels, switches, crossings, MBC sleepers etc. with contractor's tools, plants, equipments, machines, labour, Rail dolly, rollers or by any other means, including crossing of tracs. Lead upto 200m.
-
-
83265
... More
Cutting of Rail/angle/channels of any description with gas upto the maximum length of 3 m as per requirement of site.The rates includes all the tool and plant, labour, machineries and consumable etc., as per directed by Engineer-incharge. 92
-
-
20175
... More
Supply and fixing TEAM CRIB (Acid Resistant) sheet lining:-
-
-
3622050
... More
Providing edge moulding to 16 mm to 20 mm thick marble/granite stone counter, vanities etc including machine polishing to edge to edge to give high gloss finish etc. , complete as per design approved by Engineer - in - Charge
-
-
130950
... More
Supply, fabrication, and erection of Steel chequered plate for trench covers inside the control room
-
-
214756
... More
Provision for any other incidental items required for successful completion of work as per applicable cost Index of Mumbai rates of Central Public Works Department Delhi Schedule of Rates 2023.
-
-
1664825
... More
Payment for ensuring implementation and monitoring of all provisions in Safety, Health and Environmental Manual (SHE Manual) of MRVC during execution of works through entire contract period including deployment of required SHE organization as mentioned in SHE manual with 96 required qualification, arranging training to all workers and staff engaged for work, regular health check up of labours, arranging SHE meetings, SHE Inspection, SHE audit, SHE communication i.e. posters/signages/VIDEO/Audio, SHE housekeeping, Safety training, provision of protective wears, labour welfare measures, Environmental management, traffic management of vehicles for construction activities, etc. complete as detailed in Safety, Health and Environment manual of MRVC. as detail in explanatory note S No. Item No Description of Item
-
-
4556793
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%