Mumbai Metro Rail Corporation Limited Tender

Providing and fixing glazing panels & doors using 12mm thk toughen clear glass (confirming to ASTM Standards C-1048) supported byc-channel (embedded in the floor) at the bottom & side edge and wall connecting profile at the top edge,stainless steel articulated countersunk bolts threaded bolts,chemical fasterners,etc., glass panel size as per design and drawing including applying colourless sealant of joint incl. required edge polish, making glazing water tight etc. Destructive node joint test reports to be submitted forestablishing the safety factor, including operating hardware, SS patch fittings, fabricated long length satin finish SS 304 handles,patchlock, floor springs etc., complete as directed by the architect for frameless patch doors,single or twin leaf shutters with fixed panel on top. Hardware-Droma BTS 80 Floor Spring, etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Full Height Partitions in Glass finish - Providing and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 5mm thk. Non Toughened Glass on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Laminate paneling - Providing and fixing paneling made out of 50mm X 25mm X 1.5mm thk Aluminium Frame work at every 600mm C/C covered with 9mm thk marine ply etc complete. All exposed surface of the panelling shall be finished with approved 1mm thk lainate with necessary accessaries, fittings etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Projector screen housing (Pelmets) - Providing and fixing projector screen housing of19mm thick marine ply concealed in the false ceiling, having 150 mm x 200 mm clear internal measurement, finished internally and all edges in approved shade laminate, supported from RCC ceiling slab or partition with teak wood framework of section 25 mm x 35 mmetc complete as per drawings, standard specifications and instructions of Engineer In Charge.

White board - Providing and fixing magnetic white board of of approved make including powder coated Pen Tray etc complete with necessary accessaries, fittings, hardwares etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Soft board - Providing and fixing 8 mm thick soft board mounted over 6 mm thick marine ply backing with all edges to be finished in 25 mm x 12 mm Teak wood lipping which is to be fully claded with fabric . Fabric should be mounted with all necessary accessaries, fittings, hardwares etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Supplying & installing Glass wool of TWIGA or equivalent make (approved by the Engineer-InCharge) having 50mm Thk. Density : 48 Kg. / M3) insulation with Woven make Fabric Black veil enclosed in 0.8 mm thk. G.I. back pan with SS Screws & Nut Bolts or necessary fitting. Including all necessary fittiings, accessories Including all necessary fittiings, accessories etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing removable Raised/false Access Flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of Stringers system in all steel construction hot dipped galvanized of rectangular size 570 x 20 x 30 x 0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring Stringers system in all steel construction hot dipped galvanized of rectangular size 570 x 20 x 30 x 0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing &Fixing frosted film manufactured by 3 M approved equivalent on glass partition wherever required etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing trap door in the Gypsum board / POP ceiling system for elecrical and mechanical utilities with 18mm thk. plywood shutter and 12mm thk. teak wood lipping all around including wooden / G.I. frame with supports, fixtures, fastenings etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Lowering down the debris obtained from breaking and removing the cement plaster / burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure, stacking the same as and where directed etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1 Kilogram / per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid top roper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc finishings mooth (with extra cement) in any colour as directed and curing with Crushed sand VSI Grade, etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing, laying and fixing P.V.C. pipe of 20mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing on walls /ceiling/ floor 100mm Pipe. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same etc complete as per drawings, standard specifications and instructions of Engineer In Charge. .

Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap with oval typa wash basin model no 3448 etc complete as per drawings, standard specifications and instructions of Engineer In Charge. (Counter size 1.20 m x 0.60m)

Providing and fixing in position 110 mm dia UPVC Nahani Trap including SS grating,fixing in cement concrete M-15 etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing Jet Spray with guarantee against any manufacturing defect including socket, union nuts etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing Flush Valve of approved quality etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and Fixing of Mirrors in Toilets of approved Indian quality, copper plated with 10 mm thick plywood backing in the masonry etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Supplying, Providing and fixing in position Hindware, Parryware or Jaquar approved make first quality, recessed, roller type or box type white glazed toilet paper holder 150 mm x 150 mm size etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing Chromium Plated Alluminium Towel Rail 750 mm (2‘6") long, 20mm (3/4") dia and of approved quality fixed on chromium plared bracket including providing teak wood gutties in masonry etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing C.P. Angular stop cock with wall flange of approved make continental including necessary sockets/union nutetc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing in position Double coat hooks etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing in position Towel Ring etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and laying Vitrified STONE EFFECT FINISH having decorative type tiles of size 590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc complete as per drawings, standard specifications and instructions of Engineer In Charge. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10% or water by 15 to 20% allowing to dry for 6 to 8 hours After applying acrylic wall putty with appropriate proportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion1st coat with brush water content water 40 to 45 % or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70% by roller. etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and applying Textured paint of approved colour & shade to old and new surface including scaffolding preparing the surface to finishing with 2 coatsetc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing Indian teakwood joists and girders in timber floors of single, double or framed type including scaffolding if necessary, and one coat of primer etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing floor spring boxes for aluminium doors, swinging type with 180 degree swinging as per IS:7197-1990, including all labour and materials etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing & Fixing Curviliner workstation @ 1500/1500Lx600/600Dx750HT Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT, Curvilinear Table Top @ 1500/1500Lx600/600D :- Top to be made of 25 mm thick Prelaminated particle board with PVC edge band, gable end to be made of 25 mm thick Prelaminated particle board with PVC edge band, Keyboard tray (Without tray) :- Metal Powder Coated - Black Color, CPU Trolley :-Metal Powder Coated - Black Color, along with 3 drawer pedestal unit having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing in position Wooden laminate finish flooring & skriting of Pergo or approved equivalent make with having the joining accesories/ moulding between two material i.e wooden floor and carpet & flooring and skriting as per the manufactures specifications etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and Fixing of Rollar Blinds AMI Make or approved make & shade of 38 mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and laying autoclaved aerated (cellular) cement blocks masonry with more than 100 mm thick AAC blocks in cement mortar 1:4 (1 cement : 4 coarse sand ) including RCC stiffeners. The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work, racking of joints, scaffolding and curing,etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing and fixing in position steel bars reinforcement of various diameters for R.C.C. pile, pile caps, footings,raft,retaining wall,shear wall, lift wall, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and bar bending schedules,including straightening, cutting, bending, hooking the bars, binding with wires or tack welding, supporting as required etc complete as per drawings, standard specifications and instructions of Engineer In Charge. at all levels. FE 500 TMT

Providing and laying in position ready mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying and the cost of centering, shuttering, finishing and excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and and excluding reinforcement which shall be paid under relevant item.(Note :- Cement content considered in this item is @ 300 kg/cum as per IS 456 table showing minimum cement content. No extra will be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for controlled concrete).

Providing & Fixing of Storages made in 19mm thk plywood for all sides and 6mm thk on back in Laminate finish with inside and outside with 1mm thk Laminate etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing & Fixing of Charcoal / fluted Sheet Paneling on existing plywood panelingetc complete as per drawings, standard specifications and selection & instructions of Engineer In Charge.

Providing & fixing of Artifical Plants of size upto 1mtr height etc complete as per drawings, standard specifications and selection & instructions of Engineer In Charge.

Providing & fixing of Artifical Pictures / Photo Frames of Size approx 2' x 2' or 2' x 3' etc complete as per drawings, standard specifications and selection & instructions of Engineer In Charge.

Providing & Fixing in position 13.52 mm thk Glass (6mm Glass + 1.52mm Laminated Film + 6mm Glass) toughened Fixed glass door to be fixed with patch fitting, bottom pivot and floor spring as per manufacturer specification Providing & Fixing in position 13.52 mm thk Glass (6mm Glass + 1.52mm Laminated Film + 6mm Glass) toughened Fixed glass door to be fixed with patch fitting, bottom pivot and floor spring as per manufacturer specification with "D" Type SS 304 grade handles & lock etc as per detailed drawings and as per direction of engineer charge etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing & Fixing in position 13.52 mm thk Glass (6mm Glass + 1.52mm Laminated Film + 6mm Glass) toughened fixed glass partition to be fixed with patch fitting & Glazing clip profile on sides. Rate to include cost of glass edge with machine polish on all sides etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing & Fixing in Position 13.52 mm Thk tinted Toughened Glass Automatic Sliding Glass Door Set with Side fixed tinted Glass Partition with clear passage of 3000 mm & height 2400 mm. The glass to be fixed on spider fittings on top and U channel to be concealed in the floor. All other sides will be fixed directly on wall with proper silicon. The item also includes operator profile, meachanical components, electrical components, Sensors, Floor Guide 2 nos, Programme Switch with Cable etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

Providing & Fixing Of Tested Fully Glazed Fire Rated Fixed Partition tested for 120 Min fire resistance as per EN1364-1 as per IS 16945 tested from CBRE/ Certifire/ NABL Accredited Lab / any other Lab / any other reputed labs. Fully Glazed Partition shall have Asahi Make of Glass of Min. 12 mm Thick ''Pyrobel-T'', Non Wired, Toughened Interlayered Glass with 120 min. integrity(E 120) & restrict heat radiation rise to 15 KW/Sqm from a distance of 1 m from glass (EW 120) & 20 Min. insulation (El 20), with Visual Light Transmission of 86%, U - Value of 5.4, Sound Reduction Of 37 db & complaint to class 2(B)2 category of Impact Resistance as per EN 12600. Glass shall provide bi-directional (Symmetrical) Fire Protection. The Section for Fire Resistance Partition Frame shall be made out of cold-rolled Galvanized Steel of 1.6 mm thick sheet (Zinc Coating not less than 120 gm/Sq. m) suitable as per IS 277. The Fire Resistance Frame Section shall be formed using a press brake system of Size 50 mm x 60 mm. The frame shall be filled with Mineral Wool Insulation having a density Min. 96 Kg/Cu. m. The Partition Frame will have provision of GI anchor fasteners suitable for fixing in the opening. The Glass shall be held in its place with the help of 1.2 mm steel beading & ceramic tape with cross-section 5 x 15 mm as per the test evidence. Beading shall be fixed using Stainless Steel self- tapping at a distance of 70 mm from the edges and 150 mm c/c henceforth.

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground for door/ window/ clerestory window, etc complete as per drawings, standard specifications and instructions of Engineer In Charge.

METAL BAFFLE CEILING:Providing & fixing of horizontal level suspended ceiling comprising of Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 606T5.The baffle blade shall be in size of 100x25x3600mm in powder coated to Woodgrain/Plainfinish (RedOak, Cherry, Black&White)..The baffle shall be electrostatically polyester powdercoated to a coating thickness of 60-80micron.The powder coating shall pass SaltSprayTest for 750Hours as per ASTMB117, QUV–ATest for 1000hours as per ASTMG-154–(Cycle–1) and Humidity test for 1000hours as per DIN50017.The powder coating shall have anadhesion of GT0 as per ENISO2409.The shade variation within a manufacturing batch shall be delta using Excite/BYKGardner instrument andg losslevel 25±5at60 asperASTMD523(Not applicable of Wood Grain Shade).The baffle blade shall be suspended using Slotted U-profile of 20x30x3700mm(Thk-1.5mm)havingslotsin module of 25mm to keep baffles at an on-center spacing in multiples of 25mm.Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with Endcaps..SUSPENSION: Shall be hanged using baffle hanger from U-profile made of mild steel with powder coating thickness of 60-80 micron.The U–profile to comprise of alternate square&rectangularslotsof 6.5x6.5 mm & 28x6.5 mm respectively on the web for locking the baffle hanger using plug in clip to secure the hanger in perfect position and achieve uniform spacing btween baffles.The overall dimension of the U–profile is 20(W)x30(H)x3750(L)mm and is rolled form from 1.5mm thick mild steel with a powder coating thickness of 60-80micron.U-Profile to be connected to each other using U–Profile Splice.The U-profile shall be hanged from the true ceiling using threaded rod using a U-Profilehanger.The Baffle along with suspension system used together shall carry a 10 year warranty against manufacturing defect and manufacturer shall provide a waranty certificate.The supply shall be backed by a Manufacturing Test Certificate.

Providing and fixing on walls/ceiling/floor 40mmdia. CPVC pipe with necessary fittings,remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete

Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours,including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 mm thick, total thickness of aluminium composite panels not to be less than 4 mm, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealentSilicon as directed by Engineer-in-charge.

Lackered Glass Paneling - Providing and Fixing Lackered / Back painted glass paneling made out of 12mm thk Toughened colour coated glass to be pasted with silicon on 12mm thk plywood paneling with screws etc complete as per drawings, standard specifications and instructions of Engineer in Charge.