Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for 85932 Repair/maintenance Of Transformer, Ht Ug Cables, God, Ht Distribution System, Poles, Protective Devices, Earthing And Other Misc Work Of Electric Supply In Area No. I And Ii And Other Area Of Age Em-i Under Ge (south) Pune in Pune, Maharashtra, with an estimated contract value of Rs. 50,00,000. The bid opening date for this tender is 10-05-2025 and the last date for bid submission is 20-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date10 May 2025
Closing Soon20 Jun 2025
Tender Amount₹ 50,00,000
Costs
EMD
₹ 1,00,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_707604_1Tender No
85932 CWE PUNETender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Taking up or down old serviceable HT underground cable 120 Sqmm, 22000 Volts, XLPE insulated and PVC sheathed, armoured heavy duty with multistranded aluminium conductors and relaying same HT UG cable in trenches / fixed on wall / floor / culverts / Pole or encased in GI Pipe as per ground requirement etc complete all as specified and directed.
(NOTE : The cost of necessary lugs, glands, bushings etc shall deemed to be included in quoted rates. GI pipe shall be measured and paid seperately)
100
-
-
... More
Excavation in trenches in soft / loose soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cable etc. and for foundation of poles, stays etc. not exc 10 sqm on plan and not exc 1.5 in depth and getting out complete all as specified and as directed.
247.5
-
-
... More
All as per item No 5.00 above but depth exceeding 1.5 M and not exceeding 3.00 M complete all as specified and as directed.
4
-
-
... More
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick of soft/loose soil in trenches / pit complete all as specified and as directed.
231.96
-
-
... More
Removal of surplus soil to a distance not exceeding 50 m and depositing where directed not exceeding 1.5 m above the starting point complete all as directed.
19.54
-
-
... More
S&F in replacement for laying of half round unreinforced concrete pipe of size, inner dia 150 mm and Outer dia 200 mm, half round for bottom and half round for top and before laying excavated area shall be leveled, complete all as specified and directed. (Note : 01 Half round top and 01 half round bottom together will be considered as one running meter.
Sample /Make of half round un-reinforced concrete pipe will be got approved by contractor from GE prior procurement & execution of Work)
495
-
-
... More
M & L for Finding out the cable fault of any size and any capacity of cable from LT 1100 Volt grade to 22000 Volts with the help of cable fault loacator and with necessary disconnection of cable from two ends and connection after repairs with electrician at site up to length of 1 KM cable complete all as specified and directed by Engr-in-Charge.
(Note:- Transportation charge for shifting cable fault locater shall deemed to be included in above said job and nothing extra on this account will be admissible.)
8
-
-
... More
Supply and fix in replacement of Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm with jointing material (Heat shrink type) with accessories and testing after jointing complete all as specified and directed.
2
-
-
... More
Supply and fixing in replacement of Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm with jointing material (Heat shrink type) with accessories and testing after jointing complete all as specified and directed.
4
-
-
... More
Supply and fixing in replacement of Cable jointing kit for 22KV (Earthed) grade cable for indoor termination heat shrink type joint complete suitable for 3 core XLPE armoured aluminium conductor cable of size 120 to 150 Sqmm with jointing material (Heat shrink type) with accessories and testing after jointing complete all as specified and directed.
3
-
-
... More
Supply and fixing in replacement of Cable jointing kit for 22 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete suitable for 3 core XLPE armoured aluminium conductor cable of size 120 to 150 Sqmm with jointing material (Heat shrink type) with accessories and testing after jointing complete all as specified and directed.
7
-
-
... More
Supply and fixing in replacement of Cable jointing kit for 11 KV (Earthed) grade cable for straight through cold shrink type joint complete suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm with jointing material (Cold Shrinkable type) with accessories and testing after jointing complete all as specified and directed.
4
-
-
... More
Supply and fix in replacement of Cable jointing kit for 22KV (Earthed) grade cable for straight through Heat Shrink type joint complete suitable for 3 core XLPE armoured aluminium conductor cable of size 120 to 150 Sqmm with jointing material (Cold Shrinkable type) with accessories and testing after jointing complete all as specified and directed.
12
-
-
... More
S&F in replacement steel tube of size 100 dia , light grade galvanised with all fittings fixed to walls /floors /poles or under road etc complete all as specified and as directed.
(Note :- (a) The GI pipe shall be fixed with pole by MS clamps. (b) The MS work shall be measured and paid separately).
14
-
-
... More
S&F in replacement steel tube of size 80mm dia , light grade galvanised with all fittings fixed to walls /floors /poles or under road etc complete all as specified and as directed.
(Note :- (a) The GI pipe shall be fixed with pole by MS clamps. (b) The MS work shall be measured and paid separately)
10
-
-
... More
S&F in replacement for steel tubular swaged pole 410 SP-55 (11.0 metre long) including CI base plate, finial taper plug, bolts, nuts & screws as per IS 2713 Part -I & II including dismantling of old pole/struts any size complete all as specified and as directed comprising the following: -
(a) Two coats of synthetic enamel paint in white colour over a coat of primer on PCC coping. (b) Making 4 Nos of strips of 30 cm wide in alternate red and white colour using two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. (c) Writing pole number and voltage level encompassed by circle of suitable dia using two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer (the colour of base shall be black and the colour of font shall be white). Number and voltage level shall be hand written, and circle shall be stencilled. (d) Painting Poles with two coats of aluminium paint over a coat of red oxide primer on remaining exposed portions.
12
-
-
... More
M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation complete all as specified and directed by Engineer- in-charge.
6
-
-
... More
M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in mass concrete including necessary form work complete all as specified and as directed.
2
-
-
... More
Dismantling unserviceable stay assembly and removing from site complete all as specified and as directed.
(Note : Excavation and earthwork shall be measured and paid separately under relevant item)
4
-
-
... More
M&L in replacement for GI Stay assembly set comprising of 14 mm dia 400 mm iron stay bow, 2150 mm long stay rod 20 mm dia, stay plate 300mm x 300mm x 6 mm thick complete with all aceessories as shown in electric plate No 1 of MES schedule Part I including dismanteling of UNSV stay Assembly and removing from site complete all as specified and as directed. (Note :- Earth work, PCC, loop type insulator, galvanized stay stranded wire will be measured and paid separately under relevant item.)
2
-
-
... More
S&F in replacement galvanized stay stranded wire of size 7/4 mm and fixing to stay assembly complete all as shown in electrical plate No 1 of SSR-2009 (Part-I) complete all as specified and as directed.
0.5
-
-
... More
S&F in replacement of loop/ Bow type insulator, vitreous porcelain, white brown or green with over all dimensions 90 mm x 140 mm, clearance of hole 25.5 mm suitable for 11000 volts complete all as specified and as directed.
2
-
-
... More
M & L for replacement cross arms, bracings, supports, clamps, back plates and stay clamp fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and applying two coats of aluminium paint over a coat of red oxide primer including taking down old unserviceable complete all as specified and as directed.
2
-
-
... More
S&F in replacement galvanised hexagonal / Rectangular, fabricated mild steel wire 3.15 mm or 4 mm dia in overhead lines including taking down old unserviceable earth wire complete all as specified and as directed.
1
-
-
... More
S&F in replacement Aluminium conductor steel reinforced (ACSR) of any size for HT/LT OH lines on poles including stringing, binding with aluminium wire 14 SWG or aluminium tape including jumpers complete connecting of disconnected cable,service cable and street light connection including dismantling ACSR or AAC conductor & removing to store or taken on credit all as specified and directed by Engr-in-charge.
0.5
-
-
... More
M & L in replacement of switch Air Break, Gang operated Tripple pole 11KV, mechanically operated, mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 200 amps complete including dismantling of old existing unserviceable all as specified and as directed.
6
-
-
... More
S&F in replacement of drop out fuse assy single pole 11 KV , 25 Amps rating complete expulsion fuse element mounted on four / two pole structures including dismantling existing old unserviceable drop out fuse assembly complete all as specified and as directed.
(Note : Cost of necessary Nut, bolt and washers shall deemed to be included in quoted rate)
4
-
-
... More
M&L in replacement for switch air break gang operated triple pole mechanically operated mounted on HT insulators horizontal type and MS galvanized steel frame with operating mechanism worked from ground level including operating rod of size 32 mm dia / 25 mm dia as reqd GI medium grade for current rating upto 400 Amps 22000 volts complete with locking arrangement, MS clamps, bolts, nuts and washers etc.including two coats of aluminium paint over a coat of red oxide primer on MS work complete all as specified and as directed.
4
-
-
... More
S&F in replacement of drop out fuse assy single pole 22 KV , 25 Amps rating complete expulsion fuse element mounted on four /two pole structures complete all as specified and as directed.
(Note : Cost of necessary Nut, bolt and washers shall deemed to be included in quoted rate)
2
-
-
... More
M& L for servicing of 11 /22 kV gang operated air break switch by cleaning the contact, pin insulator with CTs and applying petroleum jelly at the contact point and down rod links for smooth operation including replacing the rusted, corroded bolts, nuts (using galvanised iron nuts) along with replacing the burn aluminium thimbles and defective insulators, male and female contact as required at the site complete all as specified and as directed.
Note: - (1) Insulator, male (moving) and female (fixed) contact,jumper carrier,flexible jumper wire etc shall be measured and paid separately as supply only under the relevant items. (2) The cost for replacement of aluminium thimbles, GI nuts, bolts, washers, lubricating materials etc. shall deemed to be included in the unit rate quoted by the contractor for the item.
6
-
-
... More
Supply only male contact /moving contact blade for gang operated air break switch 11 KV complete all as specified and as directed.
4
-
-
... More
Supply only female contact/fixed contact jaw for gang operated air break switch 11 KV complete all as specified and as directed.
4
-
-
... More
Supply only male contact /moving contact blade for gang operated air break switch 22 KV complete all as specified and as directed.
6
-
-
... More
Supply only female contact/fixed contact jaw for gang operated air break switch 22 KV complete all as specified and as directed.
10
-
-
... More
Supply only Tinned Copper flexible Jumper wire braded 200/400 Amp for gang operated air break switch 11 KV complete all as specified and as directed.
8
-
-
... More
Supply only Tinned Copper flexible Jumper wire braded 200/400 Amp for gang operated air break switch 22 KV complete all as specified and as directed.
6
-
-
... More
Supply only MS Jumper Carrier for gang operated air break switch 11 KV complete all as specified and as directed.
6
-
-
... More
Supply only MS Jumper Carrier for gang operated air break switch 22 KV complete all as specified and as directed.
4
-
-
... More
S&F in replacement of expulsion fuse single pole (DO fuse element) 11000V/ 22000V, 75 Amps capacity complete all as specified and as directed.
20
-
-
... More
All as per item No 42 here- in- above but 60 Amps capacity complete all as specified and as directed.
30
-
-
... More
All as per item No 42 here- in- above but 50 Amps capacity complete all as specified and as directed.
20
-
-
... More
All as per item No 42 here- in- above but 40 Amps capacity complete all as specified and as directed.
40
-
-
... More
All as per item No 42 here- in- above but 30 Amps capacity complete all as specified and as directed.
10
-
-
... More
All as per item No 42 here- in- above but 5 to 25 Amps capacity complete all as specified and as directed.
30
-
-
... More
S&F in replacement operating rod of switch air break gang operated triple pole ,steel water tube medium grade of size 25 mm dia conforming to IS 1239 of 1990 for fixing as fixed with MS galvanized steel frame including necessery welding, nuts, bolts or washers etc complete all as specified and directed by Engineer -in -charge .
4
-
-
... More
Supply and fix in replacement of metal oxide surge arrester without gap for AC system as per IEC 60099-4: 2014, outdoor type, polymer housing, single column and single phase construction, distribution class, heavy duty, nominal discharge current 10 kA, repetitive charge transfer rating (Qrs) more than 0.4 C, thermal charge transfer rating (Qth) more than 1.1 C, nominal system voltage 11 kV, highest system voltage 12 kV, rated voltage of arrester 9 kV, continuous operating voltage 7.2 kV, temporary overvoltage (10.50 kV for 1 s, 9.90 kV for 10 s, 9.35 kV for 100 s), rated short circuit current 20 kA, low short circuit current 600 A, insulation withstand level (lightning impulse voltage 1.2/ 50 µs) 75 kV, lightning impulse residual voltage (8/20 µs) at nominal discharge current maximum 30 kV, high current impulse withstand capability (4/10 µs) 100 kA, minimum creepage distance 300 mm including taking down old unserviceble Lightning arrester of any size and any type complete all as specified and as directed.
4
-
-
... More
All as per item No 49.00 above but nominal system voltage 22 KV and highest system voltage 30 KV including taking down old unserviceble Lightning arrester of any size and any type complete all as specified and as directed.
4
-
-
... More
S&F in replacement pin type insulator, HT Polymer/porcelain vitreous white, brown or green of size 150 mm high and 150 mm dia, ISI marked including one galvanised steel spindle, two galvanised iron washers and one galvanised iron nut suitable for 11000 volts including dismantling old unserviceable insulator any type / any size complete all as specified and as directed.
14
-
-
... More
S&F in replacement insulator disc type single disc assembly, ISI marked working pressure 11000 volts, porcelain vitreous white, brown, or green size 145 mm high and 255 mm dia ball and socket with tension clamp to suit the size of conductor (ACSR) including dismantling old unserviceable insulator any type / any size complete all as specified and directed.
8
-
-
... More
S&F in replacement of post top insulator 11000 volts suitable for air break switch / drop out fuse with necessary nuts, bolts, washers including dismantling old unserviceable insulator any type / any size complete all as specified and as directed.
8
-
-
... More
S&F in replacement pin type insulator, HT Polymer/porcelain vitreous white, brown or green of size 150 mm high and 150 mm dia, ISI marked including one galvanised steel spindle, two galvanised iron washers and one galvanised iron nut suitable for 22000 volts including dismantling old unserviceable insulator any type / any size complete all as specified and as directed.
20
-
-
... More
S&F in replacement insulator disc type single disc assembly, ISI marked working pressure 22000 volts, porcelain vitreous white, brown, or green size 145 mm high and 255 mm dia ball and socket with tension clamp to suit the size of conductor (ACSR) including dismantling old unserviceable insulator any type / any size complete all as specified and directed.
8
-
-
... More
S&F in replacement of post top insulator 22000 volts suitable for air break switch / drop out fuse with necessary nuts, bolts, washers including taking out existing old unserviceable insulator any type / any size complete all as specified and as directed.
6
-
-
... More
S&F in replacement of Danger notice plate of 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures, and conventional skull and bones, in signal red colour and fixed with MS clamps of flat iron of size 25 x 5 mm, bolts, and nuts of approved size, for HT 25 X 20 cm size complete all as specified and as directed.
10
-
-
... More
S&F in replacement of Precast HT cable route / cable path indicator, made out of PCC 1:2:4, type B0, (using 12.5 mm graded stone aggregate) of size 80 Cm (Height) x 30 Cm (Width) x 10 Cm (Thikness), painted with post office red colour lettering synthetic paint and letters 4 inch "HT 11 KV CABLE" to be written with black colour lettering synthetic paint and embedded in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) including necessary excavation for PCC block and placed at interval of every 30 Mtr, complete all as specified and as directed by Engr-in-Charge..
40
-
-
... More
M & L for dismantling of overhead ACSR (aluminium conductor galvanized steel-reinforced) or galvanised mild steel wire of any size and any type from pole upto 5 conductors, lowering down to facilitate tree cutting or trimming and refixing and stringing ACSR (aluminium conductor galvanized steel-reinforced) and galvanised mild steel wire of any size and any type and binding on insulator by means of 22 gauge aluminium binding wire to permissible sag including replacement of jumper with suitable size of aluminium conductor complete all as specified and as directed. (Note 1 : Each Span shall be measured and paid seperately. 2: Tree cutting shall be measured and paid separately.)
50
-
-
... More
M & L for trimming of branches of trees touching HT/LT Electric over head line and making clear about 3 m in radius and carrying and disposal where directed to a distance not exceeding 50 m complete all as directed by Engr-in-Charge . (Note :- Vehicle and other T&P shall be arranged by the contractor at own cost. Nothing extra shall be payable to contractor on this account.)
100
-
-
... More
M&L for replacement of old jumper ACSR with PVC sleeves (conductor size not less than mink) upto length 3.5 mtr for HT with Aluminium thimble (If necessary) complete all as specified and as directed.
60
-
-
... More
M & L for preparing surface and painting on steel tubular swaged pole 410 SP-55 (11.00 metre long) including cross arms, GI brackets, PCC coping complete all as specified and as directed comprising the following: -
(a) Two coats of synthetic enamel paint in white colour over a coat of primer on PCC coping (b) Making 4 Nos of strips of 30 cm wide in alternate red and white colour using two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer (c) Providing 30 cm wide retro reflective sheet of 30 cm wide, grade 1, pressure bonding type, red colour as per IS 14221: 1995 (d) Two coats of synthetic enamel paint in red colour over a coat of primer from top of electric pole to downward upto 1 metre length including cross arms, GI brackets etc. (e) Writing pole number and voltage level encompassed by circle of suitable dia using two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer (the colour of base shall be black and the colour of font shall be white). Number and voltage level shall be handwritten, and circle shall be stencilled. (f) Painting with two coats of aluminium paint over a coat of red oxide primer on remaining exposed portions.
40
-
-
... More
S&F in replacement of for earthing complete with galvanized steel earth plate electrode size 600 mm x 600 mm x 6.3 mm thick of any type of strata buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized earth lead 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe medium grade 15 mm dia connected to main earth wire on pole or control board and GI pipe medium grade 20 mm dia bore for watering funnel with wire mesh. RCC cover with frame, PCC chamber pit with PCC 1:3:6 type C-2, excavation and earth work all as shown in electrical plate No 3 of SSR-2020 connected to earthing test point complete including testing on completion all as specified and directed.
Note:- (i) Rate quoted by the contractor shall deemed to include cost of earth lead and 15 mm bore medium grade GI protection Pipe both upto 7.5 M long. Any variation in length shall be paid separately (ii) On testing after completion of earthing, if the desired earth resistance is not obtained, earthning will be re-done by the contractor at his own risk and cost to the entire satisfaction of Engr-in Charge.
20
-
-
... More
All as per item No 63.00 above but using galvanized iron strip 32x6 mm as earthing lead and GI protection pipe medium grade 40 mm dia including testing on completion all as specified & directed.
(Note:- (i) Item of earthing includes cost of earth strip and 40 mm bore medium grade GI protection Pipe upto 7.5 Meters long, Any variation in length shall be paid separately (ii) On testing after completion of earthing, if the desired earth resistance is not obtained, earthning will be re-done by the contractor at his own risk and cost to the entire satisfaction of Engr-in Charge.)
16
-
-
... More
M & L for Filtration/dehydration of 22 KV / 11 KV distribution transformer oil 60 to 65 degree C through filtration plant to improve the dielectric strength/insulation value of the transformer oil upto 60 KV at a gap of min 2.5 mm of electrodes complete all as specified and directed.
(a) The contractor will take shut down orders in working before commencement of the work from Engineer-in-charge.
(b) The contractor shall ensure no wastage of transformer oil
(c) The Contractor is solely responsible for any damage to the transformer during filtration operations. Contractor is responsible for making good any damage to the transformer at his own cost without any extra cost to the department
(d) The contractor shall ensure that the conservator tanks are full to its level before starting the dehydration. Oil for Top up will be measure and paid seperatly under respective items.
(e) The di-electric strength of oil shall be tested before & after filtration. Test results shall be submitted to Engineer-in-charge
(f) Contractor shall solely responsible for safety of the Eqpt/Transformer during on line filtration.
11500
-
-
... More
Supply and filling for top up the transformer with new transformer oil duly filtered with filtration plant complete all as specified and as directed.
Note : (a) The transformer oil shall be type EHV confirming to latest IS . (b) Mineral oil grade shall be used.
(c ) The transformer oil should have a high dielectric strength not less than 60 KV at a gap of min 2.5 mm of electrodes.
1500
-
-
... More
S & F in replacement of drawn out/Inlet valve (brass as per existing size) suitable for any make of up to 500 to 750 KVA Transformer including taking down old unserviceable valve all as specified and directed
4
-
-
... More
All as per item No 67.00 above but suitable for 100 to 400 KVA transformer complete all as specified and as directed.
8
-
-
... More
S & F in replacement of LT bush porcelain insulator with oil seal for transformer outdoor/indoor up to 500 to 750 KVA including taking down old unserviceble transformer insulator complete all as specified and directed.
6
-
-
... More
All as per item No 69.00 above but suitable for 100 to 400 KVA transformer complete all as specified and as directed.
12
-
-
... More
S & F in replacement of HT bush porcelain insulator and supply and fix news HT bush porcelain insulator for transformer outdoor/indoor 500 to 750 KVA including taking down old unserviceble all as specified and directed
8
-
-
... More
All as per Ser. item No 71.00 here- in- above but suitable for 100 to 400 KVA transformer complete all as specified and as directed.
4
-
-
... More
S & F in replacement of HV bushing (11000 voltage grade) with heat resistant gasket suitable for outdoor / indoor type transformer of capacity 100 KVA to 160 KVA complete all as specified and as directed .
8
-
-
... More
All as per item No 73 here- in- above but suitable for 200 KVA to 500 KVA transformer complete all as specified and as directed .
4
-
-
... More
All as per item No 73 here- in- above but suitable for upto 750 KVA transformer complete all as specified and as directed .
8
-
-
... More
S & F in replacement HV bushing (22000 voltage grade) with heat resistant gasket suitable for outdoor / indoor type transformer complete all as specified & directed.
6
-
-
... More
S & F in replacement copper terminal stud, both end threaded complete with double nuts & washers including distance piece both sides and heat resistance gasket suitable for HV side 11000 / 22000 volts grade for outdoor /indoor type transformer 100 KVA to 160 KVA complete all as specified & directed.
8
-
-
... More
All as per item No 77.00 above but suitable for transformer 200 KVA to 500 KVA complete all as specified & directed.
4
-
-
... More
All as per item No 77.00 above but suitable for transformer up to 750 KVA complete all as specified & directed.
8
-
-
... More
S & F in replacement LV bushing (415 voltage grade) with heat resistant gasket suitable for outdoor/indoor type transformer 100 KVA to 160 KVA complete all as specified & directed.
6
-
-
... More
All as per item No 80.00 above but suitable for transformer of capacity 200 KVA to 400 KVA complete all as specified & directed.
8
-
-
... More
All as per item No 80.00 above but suitable for transformer of capacity 500 KVA to 750 KVA complete all as specified & directed.
4
-
-
... More
S & F in replacement copper terminal stud both end threaded complete with double nuts & washers including distance piece both sides and heat resistance gasket suitable for LV side 415 volts grade for outdoor/indoor type transformer 50 KVA to 160 KVA complete all as specified & directed.
5
-
-
... More
All as per item No 83.00 above but suitable for transformer of capacity 200 KVA to 400 KVA complete all as specified & directed.
6
-
-
... More
All as per item No 83.00 above but suitable for transformer of capacity 500 KVA to 750 KVA complete all as specified and as directed.
4
-
-
... More
S & F in replacement of silica gel breather filled with silica gel for transformer of capacity up to 500 KVA complete all as specified and as directed.
12
-
-
... More
M & L for Isolating 11/22KV HT overhead supply from the substation and earth the complete system properly, disconnecting complete electric system of the transformer from HT and LT side including earthing strips,removing transformer and taking out from substation or taking down from 2/4 pole structure ,lifting arrangements,transporting to authorized service centre/work shop for repair and back to the installation after repair including installing, commissioning and testing of the capacity100 KVA to 200 KVA complete all as specified and as directed . (NOTE :- Spares/parts required to be replaced shall be measured and paid separately as supply only items . Necessary T&P should be arranged by the contractor. The rate of T&P shall deemed to be included in above quoted cost. Cost of insurance to be made by contractor to avoid any damage during transportation of transformer to work shop & back shall deemed to be included in quoted rate)
4
-
-
... More
All as per item No 87.00 above but transformer of capacity 250 KVA to 400 KVA complete all as specified and as directed.
4
-
-
... More
All as per item No 87.00 above but transformer of capacity 500 KVA to 750 KVA complete all as specified and as directed.
2
-
-
... More
M & L Draining out the complete transformer oil and keeping in safe custody in clean and dry containers for reuse. Opening the top cover of the transformer of capacity 100 KVA to 200 KVA. disconnecting and taking out complete core assy and dismantiling it for checking the serviceability of the coil winding,checking the condition of the body,cleaning the tank and remove sludge/dirt,cleaning the coils limbs,refixing of core,core assy,tap changer assy,HT/LT winding connection, terminal studs of HT/LT sides and reassembling of transformer after repairs, refitting the transformer coil incl improvement of insulation resistance value within desired level by heating or any other method to required level complete all as directed to the entire satisfaction of Engr-in-Charge .
4
-
-
... More
All as per item No 90.00 above but transformer of capacity 250KVA to 400KVA complete all as specified and as directed.
4
-
-
... More
All as per item No 90.00 above but transformer of capacity 500 KVA to 750 KVA complete all as specified and as directed.
2
-
-
... More
S & F in replacement of HT copper coil made out of proper/ required as per the existing size copper wire enameld of high quality matching with the existing impedance and pre- insulation all as specified and directed.
(Note : (a) The cost of coil shall be inclusive of varnish sleeving of insulating material.
(b) Cost of taking down the clamps, upper channels and core & HT links and re-clamp, positioning with separators, brazing etc completely shall deemed to be included in the quoted rate.)
280
-
-
... More
All as per above item No. 93.00 above but of LT copper coil complete all as specified and directed.
250
-
-
... More
S&F in replacement off load tap changer assembly complete, making connection and testing complete of the transformer of 100 KVA capacity complete all as specified and as directed.
1
-
-
... More
All as per item No 95.00 above but of 160 KVA capacity transformer complete all as specified and as directed.
1
-
-
... More
All as per item No 95.00 above but of 200 KVA capacity transformer complete all as specified and as directed.
1
-
-
... More
All as per item No 95.00 above but of 250 KVA capacity transformer complete all as specified and as directed.
1
-
-
... More
All as per item No 95.00 above but of 315 KVA capacity transformer complete all as specified and as directed.
1
-
-
... More
All as per item No 95.00 above but of 500 KVA capacity transformer complete all as specified and as directed.
1
-
-
... More
All as per item No 95.00 above but of 750 KVA capacity transformer complete all as specified and as directed.
1
-
-
... More
S&F in replacement of cork sheet gasket of 06 mm thick for transformer tank complete all as directed by Engr-in-Charge.
6
-
-
... More
S&F in replacement of cold rolled grain oriented core (CRGO) for transformer upto 50 to 500 KVA capacity complete all as specified and as directed.
40
-
-
... More
S&F in replacement of HT bus bar for 2 / 4 / 6 pole structure made out of aluminium tube having outer dia 32mm and 06mm thick suitable for 22 KV/11KV complete with all suitable joints with SS nut bolts etc and colour sleeve as per colour code including dismantling old unserviceable busbar complete all as specified and as directed.
160
-
-
... More
S&F in replacement of aluminium strip 25 x 4 mm of required length for jumpering purpose in 11 /22 KV DP/FP including taking down existing unserviceable aluminium conductor etc complete all as per the direction of Engineer-in-charge.
120
-
-
... More
Disconnection of HT & LT cable from Transformer end terminals of capacity 400 KVA, 22KV /440 volt step down transformer and shifting of Transformer, LT Control panel, capacitor panel and connecting to re-routed system after construction of foundation with in 50 m complete and reconnecting complete all as specified and as directed by the Engr-in-Charge.
4
-
-
... More
Disconnecting, rerouting, jointing after straight through joint and reconnecting of LT cable to LT control panel, capacitor bank, Transformer after making foundation, complete all as specified and as directed by the Engr-in-Charge. (Note : (i) Excavation for taking up existing cable will be measured separately. (ii) Straight through Joints as per requirement shall be measured separately.)
3
-
-
... More
M & L for preparation of old painted surfaces of floor mounted indoor/outdoor type transformer from 100 KVA to 750 KVA capacity by cleaning/rubbing with course cloth wire brushes to remove dust deposits oil grease and repainting by applying one coat of spray paint with synthetic enamel paint of approved colour without disturbing/damaging the electrical net work system/ equipment including marking of capacity /rating /incoming outgoing details in capital english alphabet of size completion all as specified and directed.
8
-
-
... More
Surface excavation not exc 30 cm depth and averaging 15 cm depth and getting out in soft /loose soil including clearing away all grass and vegitation saplings, shrubs, bushes, undergrowth roots and removing rubbish upto a distance not exc 50 mtr outside the perifery of the transformer/ 2 pole/ 4 pole structure/ feeder pillar area complete all as specified and as directed.
(Note :- The contrator will ensure that no vegiation grows during the contract period on the area so excavated)
2200
-
-
... More
M & L for loose filling with broken stone or boulder aggregates of gauge 40 to 80 mm in/on open space etc. complete all as specified and as directed.
20
-
-
... More
M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.
6
-
-
... More
M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortor 1:6 complete all as specified and as directed by Engr-in-Charge.
2
-
-
... More
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.
2
-
-
... More
M&L for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled / rammed to a true surfaces in broken stone or boulder complete all as specified and as directed by Engr-in-Charge.
1
-
-
... More
M&L for 100 mm thick PCC 1:3:6 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed by Engr-in-Charge.
1.5
-
-
... More
M&L for 100 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charte.
2
-
-
... More
M&L for MS work as in railing, guard bars, grill conforming to Fe-290 Gde E 165 complete all as specified and as directed by Engineer-in-Charge.
60
-
-
... More
M&L for Expanded metal, not exc 4 Kg / Sqm cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and as directed by Engineer-in-Charge.
30
-
-
... More
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, 11 to 15 mm dia complete all as specified and as directed by Engineer-in-Charge.
10
-
-
... More
M&L for applying two coats of synthetic enamel paint over a coat of primer including preparation on steel surfaces of any description over 10 cm width or girth complete all as specified and as directed by Engineer-in-Charge.
20
-
-
... More
M&L for straight through joint (Heat shrinkable) suitable for LT UG cable size 1.1 KV, 25 to 50 Sqmm 3 ½ Core including necessary excavation & earthwork in any type of soil complete all as specified and as direceted
2
-
-
... More
All as per item No 121.00 but suitable for size 70 to 120 Sqmm 3 ½ Core complete all as specified and as directed.
2
-
-
... More
All as per item No 121.00 but suitable for size 150 to 185 Sqmm 3 ½ Core complete all as specified and as directed.
6
-
-
... More
S& F in replacement of spindle of 11/22 KV Pin insulator complete all as specified and directed.
10
-
-
... More
Supplying and laying in replacement of synthetic Rubber insulated mats 2 mm thick for voltage upto 11 KV for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m compete all as specified and directed.
4
-
-
... More
All as per item No. 125.00 above but for 33 KV complete all as specified and as directed.
4
-
-
... More
S&F in replacement Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire all as specified and directed.
4
-
-
... More
All as per item No. 127.00 here in above but 32x6mm galvanised iron strip complete all as specified and as directed.
1
-
-
... More
S&F in replacement steel tube of size 20 mm dia , medium grade galvanised with all fittings fixed to walls /floors /poles or under trenches complete all as specified and as directed.
(Note :-The GI pipe shall be fixed with pole by MS clamps. The MS work shall be measured and paid separately).
30
-
-
... More
All as per item No. 129.00 above but 40mm dia complete all as specified and as directed.
40
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%