Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair Maintenance Work In The Office Of Jcda Af Building And Residential Of Jcda Af Building And Residential Bldg No 14a And 14b At Vsn Nagpur in Nagpur, Maharashtra, with an estimated contract value of Rs. 9,40,000. The bid opening date for this tender is 24-10-2026 and the last date for bid submission is 21-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Maha Tender

Opening Date24 Oct 2026
Closing Soon21 Nov 2026
Tender Amount₹ 9,40,000 
Notes
Download

Costs

Description

Repair Maintenance Work In The Office Of Jcda Af Building And Residential Of Jcda Af Building And Residential Bldg No 14a And 14b At Vsn Nagpur

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
All as per item No 2 above but one coat of oil bound distemper with roller on ceiling complete all as specified and as directed.

700

-

-

... More
Material & Labour for complete removal of existing treatment of wall surfaces and applying 1mm thick wall care putty and making the surface even & smooth by rubbing and applying one coat of alkali resistant primer and applying distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using painting roller/brush complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding complete all as specified and as directed.

100

-

-

... More
Material & Labour for Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

30

-

-

... More
Material & Labour for Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

20

-

-

... More
Material & Labour for prepartion of old plastered/unplastered surface of walls including washing, rubbing down and stopping of painted surfaces etc & applying one coat of cement base paint complete including filling of hole, cracks etc with lime putty or plaster of paris complete all as specified and as directed. Note :- Shade and pattern of the colour to be approved by GE.

1250

-

-

... More
Material & Labour for complete removal of existing treatment on wall surfaces by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc. & applying two coats of cement base paint complete including filling of hole, cracks with lime putty or plaster of paris all as specified and as directed. Note :- Shade and pattern of the colour to be approved by GE.

350

-

-

... More
Material & Labour for preparation of old decorated surfaces in walls, soffits, facia roof etc and applying one coat of weather proof premium acrylic based emulsion paint (100% acrylic) as per manufacturers instructions etc complete all as specified and directed. Note :- Shade and pattern of the colour to be approved by GE.

1200

-

-

... More
Material & Labour for brickwork with fly ash Bricks, straight or curved in plan exc 6 m mean radius built in CM(1:6) including demolition of old brickwork or stone /boulder masonry built in cement mortar complete all as specified and directed.

1

-

-

... More
Material & Labour for Rendering 15mm thick on fair finish of bricks/concrete/stone surface of wall in CM (1:4) and finished the surface even and smooth without using extra cement etc complete all as specified and directed.

5

-

-

... More
Material & Labour for Rendering 15mm thick on fair finish of bricks/concrete/stone surface of wall in CM (1:4) and finished the surface even and smooth without using extra cement including taking down old cement plaster on brick or stone wall,concrete, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

20

-

-

... More
Material & Labour for preparation of new plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and as directed. Note :- Shade and pattern of the colour to be approved by GE.

25

-

-

... More
Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed.

6

-

-

... More
Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm but not exceeding 4.00 sqm each and removal from site all as specified and directed.

4

-

-

... More
Taking down of shutters of any description exc 1.00 Sqm but n. exc 2 Sqm each

2

-

-

... More
Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

2

-

-

... More
Supply & Fixing 12mm thick plain/frosted toughened glass as in hinged doors, partitions, automatic doors and similar work with all necessary fittings like top and bottom brackets, two numbers of stainless steel handle as appropriate size for each shutter, stainless steel locking arrangement including cutting to shape, drilling holes required etc alongwith all necessary fittings (but excluding double action floor spring) including fixing/engraved of any types of logo/writing/picture/map if required at site etc complete all as specified and as directed.

2

-

-

... More
Supply & Fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

10

-

-

... More
Material & Labour for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed.

4

-

-

... More
Supply & Fixing powder coated anodised aluminium window and ventilator shutters, fixed/sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

6

-

-

... More
Supply & Fixing for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete all as specified and as directed. Make: RAJSHRI/SINTEX

9.5

-

-

... More
Supply & Fixing for 30 mm thick factory made solid panel PVC door shutter conferming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings as as directed. Make : RAJSHREE/SINTEX.

1.3

-

-

... More
Supply & Fixing of 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides all as specified and as directed.

5

-

-

... More
Material & Labour for preparation of new wood base surfaces applying one coats of pink primer and two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described complete all as specified and as directed.

14

-

-

... More
Supply & Fixing for 100mm long mild steel butt hinges, heavy weight cold rolled mild steel and fixed complete all as specified and as directed.

6

-

-

... More
Supply & Fixing 150 mm long aluminium anodised handles, cast type complete all as specified and as directed.

14

-

-

... More
Supply & Fixing 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

7

-

-

... More
Supply & Fixing for 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

14

-

-

... More
Supply & Fixing in repair of double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

1

-

-

... More
Supply & Fixing in repair of mild steel 4 levers Mortice lock with handle, vertical type, size 100 mm all as specified and directed.

1

-

-

... More
Supply & Fixing in repair of door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed.

2

-

-

... More
Supply & Fixing Sheet glass, ordinary quality in square but exc 0.50 Sqm each pane, 5.5 mm thick fixed to any metal/PVC/UPVC section complete

3

-

-

... More
Supply & Fixing Sheet glass, ordinary quality in square not exc 0.50 Sqm each pane, 4 mm thick fixed to any metal/PVC/UPVC section including hacking out of old glass if required at site etc complete all as specified and as directed by Engineer-in-Charge.

5

-

-

... More
Supply & Fixing Sheet glass, ordinary quality in square not exc 0.50 Sqm each pane, 3 mm thick fixed to metal section including hacking out of old glass if required at site etc complete all as specified and as directed by Engineer-in-Charge.

10

-

-

... More
Supply and fixed of Sun control/frosted film of 50 micron, reflective type and stick to any type of glass panes complete all as specified and as directed.

4

-

-

... More
Supply & Fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

2

-

-

... More
Supply & Fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS/MS/Aluminium wire staples, screws, nut & bolt etc complete all as specified and as directed.

10

-

-

... More
Taking down old MS window shutter not exceeding 1 sqm each including cutting old hinges and refixing in same opening after necessary repair work and changing MS hinges of any type including welding to old frame complete all as specified and as directed.

10

-

-

... More
Supply & Fixing in repair of harrison rail mild steel chromium plated of 25 mm dia for curtain rod fixed with two Nos of brackets, stops for each rail complete all as specified and as directed.

15

-

-

... More
Dismantling floor, hearth or wall tiling including cement mortar bedding and disposal of rubbish off the premises complete all as specified and as directed.

44

-

-

... More
Material & Labour for premium quality non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed 1:6 complete all as specified and as directed.

5

-

-

... More
Material & Labour for premium quality digital glazed ceramic coloured tiles of approved quality ISI marked (450 X 350 X 7 mm / 450 x 300 x 7 mm / 600 x 300 x 7 mm thick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface complete all as specified and as directed.

12

-

-

... More
Material & Labour for vitrified ceramic tiles of dark shade 8-9 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

25

-

-

... More
Material & Labour for vitrified ceramic tiles of dark shade 8-9 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 10 mm thick plaster in cement mortar 1:4 all as specified and directed.

2

-

-

... More
Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar.

0.2

-

-

... More
Material & Labour for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like incl 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

2

-

-

... More
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and similar situations complete all as specified and as directed.

5

-

-

... More
Taking down or up 15 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complete all as specified and as directed.

8

-

-

... More
Taking down or up 20 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complete all as specified and as directed.

5

-

-

... More
Supply & Fixing GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed.

8

-

-

... More
Supply & Fixing GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed.

5

-

-

... More
Supply & Fixing in repair chromium plated fancy type stop cock/angular cock , cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and as directed.

5

-

-

... More
Supply & Fixing in repair 15 mm bore chromium plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

5

-

-

... More
Supply & Fixing in repair of 15mm bore pillar taps, fancy type (long body), cast copper alloy with capstan heads, Decorative type chromium plated screwed down, high pressure screwed for iron pipe complete all as specified.

4

-

-

... More
Supply & Fixing in repair Hand Shower (Health Faucet) (ABS Body) with 8mm Dia, 1.5 Meter Long Spirochrome flex tube & Wall Hook etc complete all as specified and as directed.

4

-

-

... More
Supply & Fixing in repair chromium plated brass fancy type two way bib cock with wall flange, 15mm bore etc complete all as specified and as directed

2

-

-

... More
Supply & Fixing in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and as directed.

5

-

-

... More
Supply & Fixing in repair Soap Dish brass chromium plated decorative type approximate size 160x90mm complete all as specified and as directed.

2

-

-

... More
Supply & Fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

2

-

-

... More
Supply & Fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with wall complete all as specified and as directed.

2

-

-

... More
Supply & Fixing of 600 mm X 450 mm size looking mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.

2

-

-

... More
Supply & Fixing in repairs vitreous China wash down water closet pan (padestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat (white or black in colour) , closed pattern with flat bottom, and cover and mild steel chromiuum plated or cluminised hinging device also making good to floor complete all as specified and as directed.

1

-

-

... More
Supply & Fixing in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as directed.

1

-

-

... More
Supply & Fixing in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and as directed.

2

-

-

... More
Supply & Fixing in repair Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve 450mm etc complete all as specified & as directed Make : Prayag/ Parryware/Haindware

1

-

-

... More
Supply & Fixing in repairs vitreous china urinals, flat back, bowl type of size 465mmX355mmX265mm,white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed.

1

-

-

... More
Supply & Fixing in repair of waste pipe of 40 mm dia low density polythelens (LDPE) pipes of pressure rating 6 Kgf/Sq cm complete all as specified and as directed.

5

-

-

... More
Taking down rain water or soil waste pipes (any size or pattern) ,including all fittings complete all as specified and as directed.

12

-

-

... More
Material & Labour for PVC (SWR) pipe of 110 mm bore single socketed in any length with rubber ring joint fixed to wall with suitable clamps of adequate numbers etc complete all as specified and directed.

6

-

-

... More
Supply & Fixing PVC(SWR) Bend 110mm bore complete all as specified and as directed.

2

-

-

... More
Supply & Fixing PVC(SWR) Tee 110mm bore complete all as specified and as directed.

1

-

-

... More
Supply & Fixing PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to floor/wall all as specified and directed.

6

-

-

... More
Supply & Fixing PVC (SWR) bends, 75 mm bore complete all as specified and as directed.

2

-

-

... More
Supply & Fixing PVC(SWR) Tee 75 mm bore complete all as specified and as directed.

1

-

-

... More
Material & Labour for PVC (SWR) floor trap with grating,75 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap complete all as specified and as directed.

1

-

-

... More
Dismantling of wall and celling board (fiber, pulp, insulation, etc) or insulation board / slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

20

-

-

... More
Material & Labour for providing 10mm thick Plaster of Paris (POP) false ceiling (gypsum anhydrous) to flat or curved surface as per design approved over GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (of any length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as per manufacturer’s instructions including two coats of oil bound distemper over a coat of primer over a coat of putty complete all as specified and as directed.

20

-

-

... More
Supply & Fixing in repair of 25 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face fixed with screws to timber frame-work etc complete all as specified and as directed.

5

-

-

... More
Supply & Fixing in repair of 18 mm thick waterproof marine ply with both side lamination one side white and other side as approved colour with edge binding fixed with stainless steel screws, adhesive to fabricate cabinet sides, top and bottom, door, shelf inside the cabinet and drawer and all fittings complete all as specified and as directed. NOTE :-(i) Each member i,e. top and bottom, door, shelf inside the cabinet and drawer etc. shall be measured. (ii) hinges, channels and handles shall be measured and paid for separately.

5

-

-

... More
Supply & Fixing in repair of 18 mm thick PVC board Rajshree Celuka Ply or equivalent make as approved of grade 1 quality with both side plain white or coloured fixed with stainless steel screws, solvent cement/ adhesive to fabricate kitchen cabinet sides, top and bottom, door, shelf inside the cabinet and drawer and all fittings including removal of old cabinet etc complete complete all as specified and as directed.

5

-

-

... More
Supply & Fixing auto closing stainless steel (Grade 304) hinges 35 mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed.

15

-

-

... More
Supply & Fixing stainless steel handles of 100 mm size for cabinet shutter complete all as specified and as directed.

10

-

-

... More
Material & Labour for repairing of roof, chajjas etc with and including comprising of the following steps :- (a) Cleaning & drying thoroughly existing surface of roofs, chajjas, etc for all foreign materials such as fungus, moss, dust, etc by wire brushing and dusting. (b) Removing loose concrete from surface cracks and then filled with Dr Fixit crack X paste in two coats or polymer modified mortar in case of wider cracks (above 5 mm width) (c) Applying priming coat of Dr fixit roof seal top coat (diluted with water 2:1) at the rate of 100-110 sqft/ltr and then allow it to dry for 3-4 hrs (d) Applying three coats of Dr fixit roof seal top coat (without diluted) at the rate of 24 Sqft/ltr in each coat with perpenducular direction to the previous coat embedded a 50 GSM non-woven needle punched fleece between the first and second coat as reinforment and third coat will be the top final coat including allow to dry for 2-3 hrs for each coat etc complete all as specified and as directed. Note: Work shall be carried out through authorised applicator of the manufacturer. Make : Dr Fixit (Roof seal) / Asian Paints (Infinia) / Equivalent make as approved by GE.

30

-

-

... More
Material & Labour for repairing of walls and other vertical surfaces with and including comprising of the following steps:- (a) Cleaning & drying thoroughly existing surface of walls for all foreign materials such as fungus, moss, dust, etc by wire brushing and dusting (b) Removing loose concrete from surface cracks up to 5 mm width must be fillied with Dr Fixit crack X paste or polymer modified mortor in case of wider cracks (c) Apply one coat of Dr Fixit Raincoat Neo (diluted with 10% water) with brush /roller apply a self priming coat on the vertical surface on first day (d) Applying second coat on next day of Dr Fixit raincoat Neo without dilution as waterproof top coat either by roller or brush with force coverage at the rate of 3.7-4.1 Sqm/ltr to achive 100-110 micron DFT complete all as specified and directed. Note: Work shall be carried out through authorised applicator of the manufacturer.

30

-

-

... More
Supply & Fixing PVC water tank top cover of 500/1000 ltr capacity including locking arrangement with the tank body etc complete all as specified and as directed.

5

-

-

... More
Material & Labour for dismantling of old MS flag post structure and changing the top MS wheel of appropriate size by cutting the old wheel and fixing the new wheel by welding process and again refixing the whole structure in original position including painting two coats of synthetic enamel paint on complete structure etc complete all as specified and as directed.

1

-

-

... More
E/M SCHEDULE

-

-

-

... More
Taking down carefully sub-main wiring of any description and making good to the disturbed surfaces to match the existing complete all as specified and as directed.

65

-

-

... More
Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

3

-

-

... More
Material & Labour for sub main wiring (concealed/surface as required) complete with four single core 10 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 32 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 10 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface complete all as specified and as directed. Note: 5 run of 10 sqmm & one run of PVC conduit shall be measured as single unit

5

-

-

... More
Material & Labour for sub main wiring complete with four single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface complete all as specified and as directed. Note: 5 run of 6 sqmm&one run of PVC conduit shall be measured as single unit

10

-

-

... More
Material & Labour for sub main wiring (concealed/surface as required) complete with two single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface complete all as specified and as directed. Note: 3 run of 6 sqmm&one run of PVC conduit shall be measured as single unit

20

-

-

... More
Material & Labour for sub main wiring (concealed/surface as required) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface complete all as specified and as directed. Note: 3 run of 4 sqmm&one run of PVC conduit shall be measured as single unit

30

-

-

... More
Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

68

-

-

... More
Material & Labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit medium grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes, inner and outer cover of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light point controlled by one switch

4

-

-

... More
(b) One fan point controlled by one switch

2

-

-

... More
(c) One exhaust fan point controlled by one switch.

1

-

-

... More
(d) One bell/ buzzer point controlled by one push switch.

1

-

-

... More
(e) One switch socket outlet modular type 3 pin 6 amp on same board.

8

-

-

... More
(f) One light point controlled by two, two way switches,

1

-

-

... More
All as per item No 96 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.

5

-

-

... More
All as per item No 96 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

3

-

-

... More
Material & Labour for point wiring (surface) complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in PVC Caping/Casing of suitable size including all accessories and making good the disturbed surface, with and including suitable modular boxes surface type of suitable make, switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light/fan point controlled by one switch.

8

-

-

... More
(b) One 3 pin socket outlet 6 amps on same board.

18

-

-

... More
(c) One 3 pin socket outlet 6 amps on independent board.

12

-

-

... More
All as per item No 99 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

5

-

-

... More
Supply & Fix new master led tube 4ft 20 W LED batten of high-quality materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structure having nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed. Make : CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/Wipro.

25

-

-

... More
Supply & Fixing Decorative LED down light 36 watt recessed mounting type full lit luminaire with glare free uniform illumination with longer life and less maintenance, 2x2 Ft (>100 lm/W) complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and as directed. Make : CG Cat Part No. LCTLRNE-36-FO-CDL or equivalent in Wipro/Philips.

4

-

-

... More
Taking out the existing any type fittings from ceilings and Supply & Fixing new 18 Watt LED round/square recessed flat panel light pearl model with locking arrangement in ceiling with a nominal system lumen output of 1800 lumens and a minimum system efficacy of 100 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours at L70. Make : CG Cat Part No. LSCRM-18W-CDL/NWor equivalent in Bajaj/Wipro/Philips.

8

-

-

... More
Taking down old unserviceable and Supply & Fix new LED security light fitting 25 W, IP 66 rating, made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver, fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V complete all as specified and as directed. Make : CG Cat Part No. LSTS-25-CDL-M or equivalent in Bajaj/Wipro/Philips. Note : Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement.

3

-

-

... More
Taking down old unserviceable and Supply & Fix new Surface mounting LED Luminaries 2ft and 10 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed .

8

-

-

... More
Taking down old unserviceable and Supply & Fix 0-4 step, two module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed.

10

-

-

... More
Taking down old unserviceable and Supply & Fix Switch modular type, single pole one way 6 Amps, 240 volts AC suitable for existing modular switch boxes without indicator, complete all as specified and as directed.

45

-

-

... More
Taking down old unserviceable and Supply & Fix socket modular type single pole one way 6 Amps 240 volts suitable for existing modular switch boxesall complete all as specified and as directed.

32

-

-

... More
Taking down old unserviceable and Supply & Fix for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals complete all as specified and as directed.

5

-

-

... More
Taking down old unserviceable and Supply & Fix socket modular type 16 Amps, 3 pin combine, 2 module, 240 volts suitable for existing modular switch boxes all as specified and as directed.

15

-

-

... More
Taking down old unserviceable and Supply & Fix switch modular type 16 Amps,one way with indicator, 1 module, 240 volts suitable for existing modular switch boxes complete all as specified and as directed.

15

-

-

... More
Taking down old unserviceable and Supply & Fix sheet metal enclosures for TPN DB's with metal double door for incorporating MCBs, IP-43, 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 complete all as specified and as directed.

1

-

-

... More
Supply & Fix sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs, IP-43 , 8 way with 100 amps rated busbar, 240 volts, as per IS-8623 complete all as specified and as directed.

2

-

-

... More
Taking down old unserviceable and Supply & Fix MCB TPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002, integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed.

1

-

-

... More
Taking down old unserviceable and Supply & Fix MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 230 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed.

2

-

-

... More
Taking down old unserviceable and Supply & Fix MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed.

12

-

-

... More
Material & Labour for cutting & taking out the existing surface/sunken box/switch plate with switches/sockets and replacing with the following complete all as specified and as directed . (a) Modular metal flush box with modular cover plate with frame 1/2 Module

3

-

-

... More
(b) Modular metal flush box with modular cover plate with frame 3 Module

8

-

-

... More
(c) Modular metal flush box with modular cover plate with frame 4 Module

6

-

-

... More
(d) Modular metal flush box with modular cover plate with frame 6 Module

3

-

-

... More
(e) Modular metal flush box with modular cover plate with frame 8 Module

3

-

-

... More
Material & Labour for servicing and repairs of split AC 1.5/2 ton capacity servicing complete, cleaning of evaporator coil, condenser, blower, base tray, drain hole, replacemtn of polypropelene pad, oiling of fan motor, checking of wiring connections, terminals capacitor, relay selector switches, drainage, rubber bushes bearing bushes etc and refixing the same in position and testing complete all as specified and as directed. Note : Split Acs are installed at various floors in Vayusena Nagar ie. Ground floor to 3rd floor, MCCF Sonegaon, 22 P&S. Contractor shall arrange his own arrangemnt to access the repairs for split units. No tools and plants shalll be supplies to the contractor from the department

20

-

-

... More
Taking out unserviceable temperature sensor and Supply and fix new Temperature sensor with cold assembly 230 v AC suitbale for split type AC invertor/non invertor of 1.5/2 Ton capacity of any make model complete all as specified and as directed.

3

-

-

... More
Taking out defective capacitor and supply and fix running capacitir suitable for 1.5/2 ton 230 v split AC invertor/non invertor 36/40/45/50/55/60 mfd complete all as specified and as directed.

10

-

-

... More
Taking down unserviceable fan motor blade assembly & supply and fix new fan motor blade assembly for split type AC invertor/non invertor 1.5/2 Ton capacity of any make/model complete all as specified and as directed.

3

-

-

... More
Taking down unserviceable PVC drain pipe & supply and fix with new PVC drain pipe with clamps set of size 20 mm dia up to 2 mtrs complete all as specified and as directed.

3

-

-

... More
Taking down unserviceable brass suction/discharge valve & supply & fix new brass suction/discharge valve of suitable size for 1.5/2 ton split type AC invertor/non invertor of any make /model complete all as specified and as directed.

2

-

-

... More
Taking down unserviceable brass flare nut supply and fix new brass flare nut of suitable size for 1.5/2 ton split type AC invertor/non invertor of any make /model complete all as specified and as directed.

6

-

-

... More
Taking down unserviceable sheet metal enclusure with earth plug socket & suply and fix sheet metal enclosure with single pole and neutral with two pin and earth plug and socket complete with one single pole mcb of 20 amp complete all as specified and as directed.

2

-

-

... More
Dismantling of defective compressor sealed unit from the existing AC's foundation by removing suction/ discharge line and providing of new compressor sealed unit of same size and quality from the manufacturers of ACs or of make authorised by the manufacturers of AC's, rotary type and checking (company re-oriented), system with nitrogen gas pressure, testing for leakages and vaccumisation of complete system with gas recharging with R-134a/R -22/R-32/R-410a gas as required and oil testing suitable for 1.5/2 Ton split AC invertor/non invertor capacity including testing complete all as specified and as directed. Note :- The rate is inclusive of refrigerant gas.

2

-

-

... More
Taking down of unserviceable PCB (Printed circuit board) and providing new PCB for AC of 1.5 / 2.0 Ton capacity of split AC invertor/non invertor complete all as specified and as directed.

4

-

-

... More
Dismantling old and providing new copper tubes of size 3/8, 5/8, 1/4, 1/2 inch for suction line including rubber tube insulations of same size for fixing AC invertor/non invertor complete all as specified and directed.

15

-

-

... More
Material & Labour for checking of gas leakage and supply and charging of gas, including vacummising, cutting, brazing after filling again and checking of gas leakage after gas charging for the split AC invertor/non invertor 1.5/2 Ton complete all as specified and as directed. Make of gas : R-134 a/R-22/R-32/R-410a. Note: i)Contractor shall be ensure that gas charging to be measured as Job and if there is any leakage during the contract period, then the same will be fullfilled by the contractor without any extra cost. ii)Tools and plants, gas cylinder shall not be issued by MES.

8

-

-

... More
Supply and charging Refrigerant (R-22/ R -134a/410A/R-32) suitable for Split AC invertor/non invertor complete all as specified and as directed.

5

-

-

... More
Supply & Fixing pvc insulated 1100v grade of size 2.5 sqmm, 3 core pvc round sheathed insulated flexible FR copper cable complete all as specified and as directed.

9

-

-

... More
Supply and provide in holes of POP (Plaster of paris) Alabaster plaster (450 Gms ) very high strength, fast setting, dries fast, snow white colour, creamy consistency, compressive strength after 1 hrs : 150kg/cm2 complete all as specified and as directed.

2

-

-

... More
Material & Labour for disconnecting electric supply, taking down fan, dismantling blades carefully after unscrewing nuts and bolts of ceiling fan, wall fan, exhaust fan of any make from existing position and bringing to AGE E/M store yard for repairs, overhauling, oiling, greasing and cleaning all dusts and rehanging in position and connecting up electrically including minor items like split pins complete all as specified and as directed. Note: Rewinding work and replacement of spares shall be measured and paid separately under appropriate items. No supporting materials, tools and plants shall be issued by MES to contractor.

20

1

-

... More
Material & Labour for Rewinding to ceiling/wall fan motor assembly complete with super enameled copper winding wire of suitable gauge for any make and any size of fan including varnishing, drying up, providing fresh clean lubricant oil/grease, reassembling and tesing etc complete all as specified and as directed.

10

-

-

... More
Supply & replace ball bearing 6201/ 6202/ 6203 for 48 " (1200 mm ) sweep fan including taking down old unserviceable ball bearing complete all as specified and as directed.

9

-

-

... More
Supply & Fixing capacitor 2.5 MFD, 240 Volts, including taking down old unserviceable complete all as specified and as directed.

15

-

-

... More
Material & Labour for Rewinding to exhaust fan motor assembly complete with super enamelled copper winding wire of suitable gauge including varnishing, drying up, providing fresh clean lubricant oil/grease, reassembling and tesing etc complete for size upto 12" (305 mm) sweep complete all as specified and as directed.

6

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.