Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Addn/altn/renovation Of Old Security Watch Tower No 1,3,7,9 And 14 At Nda Khadakwasla Under Ge (p) Nda Khadakwasla in Pune, Maharashtra, with an estimated contract value of Rs. 43,18,000. The bid opening date for this tender is 05-05-2025 and the last date for bid submission is 02-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date5 May 2025
Closing Date2 Jun 2025
Tender Amount₹ 43,18,000
Costs
EMD
₹ 86,360Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_706674_1Bid Award Id
ViewTender No
8150/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for water proofing treatment to RCC roof slab, walls, chajjas etc,including taking down of existing un-serviceable water proofing treatment of any description / bituminous membrane and taking down existing plaster on roof and parapet of any roof height including prepration of surfaces carefully by cutting chiseling, cleaning the surface by scraping, brooming, brushing etc. to recive the new plaster as described below and removing the rubbish from site shall be carried out as specified below and as directed by Engineer-in-Charge including following:-
(a) M&L for 10mm average thickness of screed layer on RCC roof slab in cement mortar (1:3) mixed with WPC or as recommended by manufacturer and the same shall be measured and paid in the unit rate quoted under this item.
(b) M&L for Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bitumnous primer @ 0.40 Ltr/Sqm of area complete all as specified. (c) M&L for APP based polymeric modified approved membrane of min 3mm thick, non woven, polyester, weighingh not less than 3.50 Kg/Sqm with 10 cm overlap both ways as specified & joints sealed and applied complete by torch application method including carrying out test by flooding water for 24 hrs for leakage & seepages and rectifiying the same to the entire satisfaction of GE.
(d) Finally applying two coat of solar reflective bituminous aluminum paint @ 0.10 ltr/sqm on the top of membrane surface complete all as specified and as directed by Eng-in-charge.
256
4
1088
... More
S&F galvanised mild steel medium grade tubes 15mm dia bore with all fittings and fixed to wall , floor etc. including taking down up or down steel tubing and connections incl cleaning for re-fixing or removal to stores ,15mm dia pipes complete all as specified and directed by engineer incharge.
60
18
1095
... More
S&F galvanised mild steel medium grade tubes 20mm dia bore with all fittings and fixed to wall , floor etc. including taking down up or down steel tubing and connections incl cleaning for re-fixing or removal to stores , 20mm dia pipes complete all as specified and directed by engineer incharge.
50
19
962.5
... More
S&F rotational moulded polye- thylene water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (2009) including dismantling of existing water tanks Exc 250 not Exc 500 ltr capacity and removing to store complete all as specified and directed by engineer incharge.
5
21
106.25
... More
S&F 20mm dia tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) including taking down old one complete all as specified and directed by engineer incharge.
10
22
222.5
... More
S&F in repair Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by engineer incharge.
5
23
116.25
... More
S&F in repairs Bib taps 15mm dia, chromium plated ,fancy type ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by engineer incharge.
10
24
242.5
... More
S&F in repairs Stop valves/Angle valves 15mm dia, chromium plated ,fancy type, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed by Engr-in-charge.
20
25
505
... More
S&F in repair Brass CP mixer 15mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by engineer incharge.
5
26
131.25
... More
S&F in repair for Brass chromium plated shower rose 125mm size complete all as specified and directed by engineer incharge.
5
27
136.25
... More
S&F in repair for Brass chromium plated shower arm 15 mm size, 195mm long with bend of 45 degree with flange size complete all as specified and directed by engineer incharge.
5
28
141.25
... More
S&F in repairs for PVC flushing cistern valve less, syphonic action type low level, ball valve, float and handle with bracket fixed of 10 ltrs capacity complete all as specified and directed by engineer incharge.
5
29
146.25
... More
S&F for Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern including necessary cutting to floor tiles and connection to WC complete all as specified and directed by Engr -in-Charge.
5
30
151.25
... More
S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by engineer incharge.
5
31
156.25
... More
S&F repair vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but complete all as specified and directed by engineer incharge.
5
32
161.25
... More
S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed , screwed for iron pipe of bore 15 mm fixed complete all as specified and directed by engineer incharge.
5
33
166.25
... More
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by engineer incharge.
20
34
685
... More
S&F waste coupling of PTMT (half or full threaded) (Minimum weight 40 mm-45gms/40mm-60 gms) for 32mm bore dia pipe complete all as specified and directed by engineer incharge.
10
35
352.5
... More
S&F for PVC flexible waste pipe of 32 mm dia, and connection to waste coupling complete all as specified and directed by Engr -in-Charge.
5
36
181.25
... More
S&F tubular 20 mm dia 'D' type towel rail 600 mm long of CP brass, fixed with chromium plated brass screws and wooden/plastic cleats all as specified.
5
37
186.25
... More
S&F Soap dish any type fixed to plugs with chromium plated brass screws minimum size 160x160x90mm complete all as specified and directed by engineer incharge.
10
38
382.5
... More
M&L Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 50mm bore of pipes complete all as specified and directed by engineer incharge.
50
39
1962.5
... More
S&F in repair wash down water closet (Pedestal pattern), white including traps and all fittings complete all as specified and directed by engineer incharge.
5
40
201.25
... More
Dismantling of cast iron 100 mm bore pipes jointed in cement motar complete all as specified and directed by engineer incharge.
20
41
825
... More
S&F for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor complete all as specified and directed by engineer incharge.
20
42
845
... More
S&F for 110mm bore dia PVC (SWR) bends with access door complete all as specified and directed by engineer incharge.
15
43
648.75
... More
S&F for 110mm dia PVC (SWR) branch piece single(single T) equal or unequal with access door complete all as specified and directed by Engineer -in-charge
10
44
442.5
... More
S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer -in-charge
5
45
226.25
... More
M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-charge.
10
46
462.5
... More
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by engineer incharge.
10
47
472.5
... More
S&F in repairs Gun-metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and direceted by Engr-in-charge.
5
48
241.25
... More
Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed by engineer incharge.
25
49
1231.25
... More
Taking down chowkhats or frame exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed by engineer incharge.
10
50
502.5
... More
M&L Solid PVC door frame of size 50x47mm ,made out of 5mm plain colour PVC sheet re inforced with MS square tube ,supplying and fixing in opening complete all as specified and directed by engineer incharge.
23
51
1178.75
... More
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by engineer incharge.
15
52
783.75
... More
S&F 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed incl cutting holes and hold fasts fixing (split at one end) complete all as specified and directed by engineer incharge.
0.3
53
15.975
... More
S&F 35mm thick Factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I (2009), Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by engineer incharge.
9.5
54
515.375
... More
S&F 35 mm thick Factory made Plain framed, panelled shutter (three panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by engineer incharge.
9.5
55
524.875
... More
S&F Anodised aluminium frame powder coated for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall complete all as specified and directed by engineer incharge.
217.35
56
12225.9375
... More
S&F Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by engineer incharge.
5.5
57
314.875
... More
S&F aluminium powder coated three track sliding window with 5.5 mm thick tinted glass shutters and stainless steel mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clip etc using following aluminium powder coated sections conforming to catalague of M/s JINDAL or of equivalent may complete all as specified and directed (a). Bottom frame - 20620, (b) Top frame and vertical -20621, (c) Handle (side) -20606, (d) Shutter interlock -20724, (e) Shutter top and bottom -20844 & (f) Glazing clip -19352. complete all as specified and directed by engineer incharge.
70
58
4077.5
... More
S&F 100mm butt hinges cold rolled mild steel medium weight and fixed complete all as specified and directed by engineer incharge.
45
59
2666.25
... More
S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed by engineer incharge.
30
60
1807.5
... More
S&F for Aluminium anodised, barrel tower bolts 150mm long of ex- truded section and fixed complete all as specified and directed by engineer incharge.
10
61
612.5
... More
S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed by engineer incharge.
30
62
1867.5
... More
S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by engineer incharge.
10
63
632.5
... More
S&F Floor door stopper of Overall length of cover plate 140mm of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and directed by engineer incharge.
15
64
963.75
... More
M&L for preparation of new wooden surfaces and painting two coats of Synthetic Enamel paint over a coat of pink primer complete all as specified and directed by engineer incharge.
66
65
4306.5
... More
S&F frosted Sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each panel complete all as specified and directed by engineer incharge.
5.5
66
364.375
... More
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including taking out wooden beads and incl supply & fixed wooden beads in the same position complete all as specified and directed by engineer incharge.
8
67
538
... More
S&F harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed by engineer incharge.
10.5
68
716.625
... More
S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed by engineer incharge.
680
69
47090
... More
M&L for preparation of new steel/iron surface and applying of two coats of synthetic enamel paint over a coat of Red oxide primer of any description over 10 cm in width or girth complete all as specified and directed by engineer incharge.
-
70
-
... More
Dismantling floor or wall tiling of any description and size including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed by engineer incharge.
(Note : The cost of Removal of rubbish outside of MD land deemed to be included in quoted rate and nothing extra shall be admissible on this account)
37
71
2636.25
... More
Taking down cement plaster on brick/ stone/concrete walls etc including raking out joints,hacking for key, scrubbing down with water etc complete all as specified and directed by engineer incharge.
(Note : The cost of Removal of material outside of MD land deemed to be included in quoted rate and nothing extra shall be admissible on this account)
115
72
8308.75
... More
Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises where directed by Engr-in-charge.
(Note : The cost of Removal of material outside of MD land deemed to be included in quoted rate and nothing extra shall be admissible on this account)
10.8
73
791.1
... More
M&L 75 mm thick PCC (1:4:8) type D2 using 40 mm graded aggregates as in sub base complete all as specified and directed by engineer incharge.
250
74
18562.5
... More
Roughening surfaces of old concrete floor by picking, sweeping clean and brushing neat cement slurry with 3.0kg of cement per sq. metre after washing down with water to remove dust, etc complete all as specified and directed by engineer incharge.
-
75
-
... More
M&L for light colour non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) in floors etc, area of each tile exc 0.11 sqm and n. exc .18 sqm, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 20 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed by engineer incharge.
33
75
2483.25
... More
M&L for Colored ,Glazed ceramic tiles in vertical wall surfaces 350x250mmx7mm / 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or color cement to match, laid over and over and including 10 mm thick plaster in CM (1:3) complete all as specified and directed by engineer incharge.
115
76
8768.75
... More
M&L for joint free colour Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed by engineer incharge.
235
77
18153.75
... More
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and over & including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed by engineer incharge.
9.3
76
709.125
... More
Labour only for chamferring and rounding the straight cut edges of stone slab such as in steps, cooking platform and other similar situations complete all as specified and directed by engineer incharge.
35
77
2703.75
... More
Excavation in trenches in Soft/Loose soil n. exe 1.5m wide & n. exe 1.5m depth for foundation etc n.exe 10sqm on plan and getting out in complete all as specified and directed by engineer incharge.
-
78
-
... More
M&L for Fly ash modular brick masonry straight or curved on plan exc 6m mean radius in CM (1:4) complete all as specified and directed by engineer incharge.
-
79
-
... More
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed by engineer incharge.
6.5
80
521.625
... More
M&L for Hard-core of broken stone gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and directed by engineer incharge.
-
81
-
... More
M&L plain cement concrete type D-2 (1:4:8) (40mm Graded stone aggregate) in foundations, filling and mass-concrete complete all as specified and directed by engineer incharge.
-
82
-
... More
M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by engineer incharge.
7
83
582.75
... More
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 surfaces, finished fair and even complete all as specified and directed by engineer incharge.
15
84
1263.75
... More
M&L Preparation of new plastered surfaces and applying two coats of cement base painting including a coat of primer on wall complete all as specified and directed by engineer incharge.
15
85
1278.75
... More
S&F sinks with drainage boardmade of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm complete all as specified and directed by engineer incharge.
5
86
431.25
... More
Forming V grooves in plaster n exc 10mm deep and n exc 10mm on face complete all as specified and directed by engineer incharge.
45
87
3926.25
... More
M&L for filleting in any position and to any shape in cement mortar (1:4) section not exc 25 Sqm complete all as specified and directed by engineer incharge.
45
88
3971.25
... More
M&L for Preparing old/existing plastered surfase of ceiling and applying three coats of white wash complete all as specified and directed by engineer incharge.
250
89
22312.5
... More
M&L for Preparing old/existing plastered surfase of wall and applying two coats of OBD including 3mm thick wall care putty complete all as specified and directed by engineer incharge.
435
90
39258.75
... More
M&L Preparing old/existing plastered surfaces and applying two coats of cement base painting including a coat of primer on wall complete all as specified and directed by engineer incharge.
1050
91
95812.5
... More
Demolition and breaking up drain pipes in 150 mm dia (SWG, AC or RCC pipes ) set in CM complete all as specified and directed by engineer incharge.
20
89
1785
... More
Dismantling of brick work or stone/ boulder maonary/ pre cast concrete block walling , built in cement mortar complete all as specified and directed by engineer incharge.
2
90
180.5
... More
M&L for providing RCC pipes of 150mm dia class NP 2 with collars laid and jointed with cement jointed complete all as specified and directed by engineer incharge.
20
94
1885
... More
M&F for concrete bed to 150 mm drain pipes including packing under , and haunching against sides of pipes after they are laid and tested forming cradles, PCC 1:4:8 type (40mm graded stone aggregate) D2 complete all as specified and directed by engineer incharge.
20
95
1905
... More
M&L for providing plain cement concrete (1:2:4) type B1 using 12.5mm grade stone aggregate as in coping including weathering slightly, rounded or chamfered angles and throating and necessary use and waste of form work complete all as specified and directed by engineer incharge.
0.1
96
9.625
... More
M & L for providing precast RCC 1:2:4 type B1 (using 20mm grade stone aggregate) as in cover slabs for manholes set in CM (1:4) complete all as specified and directed by engineer incharge.
(Note : Reinforcement shall be measured & paid separately)
0.3
97
29.174999999999997
... More
S&F for providing mild steel TMT bars 6 to 8 mm dia cut to length bent to shape required includig cranking, bending etc & binding with ms wires (annealed) n. exe 0.9mm dia complete all as specified and directed by engineer incharge.
30
98
2947.5
... More
S&F for providing MS bands, straps and handles for MH covers and rungs in manholes and similar small articles, all as directed conforming to Fe 290 Gde -E- 165 complete all as specified and directed by engineer incharge.
2
99
198.5
... More
M&L plain cement concrete 1:3:6 (40mm graded stone aggregate) for manhole in surface channels and drains of type C2 complete all as specified and directed by engineer incharge.
0.5
100
50.125
... More
M&L plain cement concrete 1:3:6 (20mm graded stone aggregate) for in roof kerbs or mud stops, rounded or chamfered type C1 complete all as specified and directed by engineer incharge.
1.44
100
144.35999999999999
... More
M&L cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required 150mm dia complete all as specified and directed by engineer incharge.
5
101
506.25
... More
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified and directed by engineer incharge.
140
102
14315
... More
Removing excavated material (soil) n exc 50 m and depositing where directed at the level n exc 1.5 m above the starting point complete all as specified and directed by engineer incharge.
21
106
2231.25
... More
M&L for providing laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawn, drive way or light traffic parking etc of required strength, thickness & size/ shape made by table vibratory method using PU mould , laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of interlocking paver block into sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver block as per required size and pattern , finishing and sweeping extra sand complete all as specified and directed by engineer incharge.
140
106
14875
... More
M&L laying and compacting 200mm thick (compacted thickness) Granular Sub Base Course (GSB) grading as per Grade I as specified Table 400-1 of MaRTH specification for Road and Bridge works, 201, in a single layer over compacted subgrade with natural sand, crushed gravel, crushed stone, crushed slag or combination therof as per grading required. The materials are mechanically mixed, spread and leveling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-100 KN static weight for achieving required compaction density of alteast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerances as per Table 900-1 of MaRTH specifications for Road and Bridge works, 2013.
14
106
1487.5
... More
S&F glossy finish Chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cemeant slurry in floors with grey cement and pigment over 20mm thick screed bed in CM 1:6 complete all as specified and directed by engineer incharge.
60
108
6495
... More
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by engineer incharge.
50
109
5462.5
... More
M&L Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed by engineer incharge.
6.01
110
662.6025
... More
M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe 410-W (Gde E-250) quality A complete all as specified and directed by engineer incharge.
3027.6
111
336820.5
... More
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by engineer incharge.
144
113
16308
... More
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by engineer incharge.
135
114
15423.75
... More
M&L for point wiring (Concealed wiring) of any length using approved colour coding as per IS and IE rule , with multi stranded copper conductor 1.5 Sqmm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS-H cable,1100 volts grade, conf to IS:694, ISI marked in and including PVC rigid conduits heavy duty, medium grade, ISI marked (Min 20mm dia ) with valid CML No. totally concealed in wall/ floor and providing casing caping, ISI marked, not less than 20 mm dia to be fix on roof/ ceiling including all accessories as required at site complete including GI Metal Flush box (sunken box of min 1.0mm thick) with modular frame/cover plate of suitable size for mounting modular switches/sockets etc and PVC insulated muti stranded FRLSH copper conductor 1.5 Sq.mm single core cable (Green colour) as earth conductor and connecting to common earth dolly complete all as specified and directed by engineer incharge for the following:-
-
115
-
... More
One light point controlled by one switch one way type
55
116
6393.75
... More
One Ceiling fan/Exhaust fan point controlled by one switch one way type
15
117
1758.75
... More
One 3 pin 5 Amps socket outlet point on Same board
12
118
1419
... More
One 3 pin 5 Amps socket outlet point on independent board
20
119
2385
... More
Note for Item Sr No 102.01 to 102.04
(i) Contractor shall provide circuit wiring with 3 x 2.5 Sqmm copper wire from DB to switch board and rate for the same is deemed to be included in unit rate of item.
(ii) Cutting in chases and pointing in brick wall/Stone Wall shall be done by contractor without any extra cost.
(ii) Making good of distrubed surfaces matching with existing finishes shall be done by contractor without any extra cost.
(iii) Contractor shall make the surface good after flushing the sunken box as existing without any extra cost
(iv) Length of point Wiring for light points/ fan points (ceiling/ exhaust / wall) shall be of suitable length as per site requirement and location of fittings and their switches as directed by Engr-in-charge. The cost of same shall deemed to be included in quoted rates. (v) Contractor shall provide wire mesh before plastering work on chase cutting to avoid cracks developed on surface
(vi) GI Sunken box and modular switch socket shall be of same make and sunken box shall be suitable for mounting modular switch and socket approved by GE.
-
120
-
... More
All as per item No 102 above but with 2.5 sq mm copper conductor FRLSH (multistrand), 1100 volts grade PVC insulated, ISI marked, conf to IS 694, unsheathed cable in and including concealed PVC conduit, heavy duty ,ISI marked, medium grade with valid CML No not less than 25 mm dia with all fitting & accessories as required and including PVC insulated ISI marked, unseathed, FRLSH copper conductor cable of size 2.5 sq mm (Green Colour) as earth wire to common earth dolly for one three pin socket outlet 15 Amps complete all as specified and directed by engineer incharge.
8
121
970
... More
All as per item No 102 above but with 4 sq mm copper conductor FRLSH (multistrand), 1100 volts grade PVC insulated, ISI marked,conf to IS 694, unsheathed cable in and including concealed PVC conduit, heavy duty ,ISI marked, medium grade with valid CML No not less than 25 mm dia with all fitting & accessories as required and including PVC insulated ISI marked, unseathed, FRLSH copper conductor cable of size 4 sq mm (Green Colour) as earth wire to common earth dolly for one three pin socket outlet 15 Amps.(For Geyser in bathroom) complete all as specified and directed by engineer incharge.
5
122
611.25
... More
Note for Item Sr No 102, 103, & 104: -
(i) Cutting in chases and pointing in brick wall/Stone Wall shall be done by contractor without any extra cost.
(ii) Making good of distrubed surfaces matching with existing finishes shall deemed to be included in quoted rate of work and nothing extra on this account is admissible.
(iii) Contractor shall make the surface good after flushing the sunken box as existing without any extra cost
(iv) Length of point Wiring for power point shall be of suitable length as per site requirement and location of fittings and their switches as directed by Engr-in-charge. The cost of same shall deemed to be included in quoted rate and nothing extra on this account is admissible.
-
123
-
... More
M&L for point wiring (Concealed wiring in existing concealed conduit) of any length using approved colour coding as per IS and IE rule , with multi stranded copper conductor 1.5 Sqmm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS-H cable,1100 volts grade, conf to IS:694, ISI marked including GI Metal Flush box (sunken box of min 1.0mm thick) with modular frame/cover plate of suitable size for mounting modular switches/sockets etc and PVC insulated muti stranded FRLSH copper conductor 1.5 Sq.mm single core cable (Green colour) as earth conductor and connecting to common earth dolly complete all as specified and directed by engineer incharge for the following:-
-
124
-
... More
One light point controlled by one switch one way type
20
125
2505
... More
One Ceiling fan/Exhaust fan point controlled by one switch one way type
5
126
631.25
... More
One 3 pin 5 Amps socket outlet point on Same board
3
127
381.75
... More
One 3 pin 5 Amps socket outlet point on independent board
5
128
641.25
... More
Note for Item Sr No 105.01 to 105.04 -
(i) Contractor shall provide circuit wiring with 3 x 2.5 Sqmm copper wire from DB to switch board and rate for the same is deemed to be included in unit rate of item.
(ii) Cutting in chases and pointing in brick wall/Stone Wall shall be done by contractor without any extra cost.
(ii) Making good of distrubed surfaces matching with existing finishes shall be done by contractor without any extra cost.
(iii) Contractor shall make the surface good after flushing the sunken box as existing without any extra cost
(iv) Length of point Wiring for light points/ fan points (ceiling/ exhaust / wall) shall be of suitable length as per site requirement and location of fittings and their switches as directed by Engr-in-charge. The cost of same shall deemed to be included in quoted rates and nothing extra on this account is admissible.
-
129
-
... More
All as per item No 102 above but with 2.5 sq mm copper conductor FRLSH (multistrand), 1100 volts grade PVC insulated, ISI marked, conf to IS 694, unsheathed cable in existing concealed PVC conduit of any size including including GI Metal Flush box (sunken box of min 1.0mm thick) with modular frame/cover plate of suitable size for mounting modular switches/sockets etc and PVC insulated muti stranded FRLSH copper conductor 2.5 Sq.mm single core cable (Green colour) as earth conductor and connecting to common earth dolly for one three pin socket outlet 15 Amps complete all as specified and directed by engineer incharge.
2
130
260.5
... More
M&L for point wiring (surface conduit wiring) of any length using approved colour coding as per IS and IE rule , with multi stranded copper conductor 1.5 Sqmm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS-H cable,1100 volts grade, conf to IS:694, ISI marked including in and including PVC rigid conduits (ivery colour) heavy duty, medium grade, ISI marked (Min 20mm dia ) with valid CML No. fixed on wall/ floor/ roof/ ceiling including all accessories as required at site complete including PVC surface box ,heavy duty of approved make with modular frame/cover plate of suitable size for mounting modular switches/sockets etc and PVC insulated muti stranded FRLSH copper conductor 1.5 Sq.mm single core cable (Green colour) as earth conductor and connecting to common earth dolly complete all as specified and directed by Engineer in Charge for the following:-
-
131
-
... More
One light point controlled by one switch one way type
40
132
5290
... More
One 3 pin 5 Amps socket outlet point on Same board
5
133
666.25
... More
One 3 pin 5 Amps socket outlet point on independent board
10
134
1342.5
... More
Note for Item Sr No 107.01 to 107.03 -
(i) Contractor shall provide circuit wiring with 3 x 2.5 Sqmm copper wire from DB to switch board and rate for the same is deemed to be included in quoted rate and nothing extra on this account is admissible.
-
135
-
... More
S&F modular switch, one way, 6 Amps, one module complete all as specified and directed by engineer incharge.
190
136
25887.5
... More
S&F modular socket 6 Amps 2/3 pin, two module complete all as specified and directed by engineer incharge.
55
137
7548.75
... More
S&F modular switch, one way, 16 Amps, one module complete all as specified and directed by engineer incharge.
10
138
1382.5
... More
S&F modular socket 6 Amps /16 Amps 2/3 pin two module complete all as specified and directed by engineer incharge.
10
139
1392.5
... More
S&F ceiling rose, 3 terminals / PVC / Polycarbonate, isolated body complete all as specified and directed by engineer incharge.
120
140
16830
... More
S&F Modular stepped type electronic fan regulator complete all as specified and directed by engineer incharge.
15
141
2118.75
... More
S&F 240 V, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 amp single pole MCB `C` curve, 10 KA, including metal plug top (2P+E) complete all as specified and directed by engineer incharge
10
142
1422.5
... More
S&F LED Tube light fitting 22 watt, surface / wall mounted LED batten housing made of aluminium extrusion with high efficient LED`s, opel diffuser, IP 20, with system efficacy of 100 lm/W , colour temp 6500 K, 50 Hz, 240 V complete including all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of light fittings, incl 2 x PVC mounting box for fixing of light complete as directed by Engineer in Charge . Make - Halonix Cat Part No- HLB-03-22-CW-AL-SQ or equivalent in Luker - LUMOS PRIMO Aluminium tube set-LT-522 or equivalent mentioned in Appendix 'C' to tender.
55
143
7878.75
... More
S&F LED Tube light fitting 20 Watt, Surface / wall mounted, inverter type, LED batten, Polycarbonate housing, Back up of up to min 3 hours, auto cut off after full charging of battery, light output in regular mode min 100 Im/ watt, with voltage surge protection of 4 KV, color temp 6500 K, IP 20, in built durable battery complete including all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of light fittings and incl 2 x PVC mounting box complete as directed by Engineer in Charge.
Make - Halonix Cat No - LED Inverter batten HLB-08-20-CW -INV (20 Watt), Bajaj Cat No: 830414 LEDZ Invertor batten 20 W CDL and Luker Cat part No LUMOS Inverter LTGT520N or equivalent mentioned in Appendix 'C' to tender
20
144
2885
... More
S&F LED Tube light fitting 10 Watt, Surface / wall mounted LED batten housing made of aluminium extrusionwith high efficient LED`s, opel diffuser, IP 20, with system efficacy of 100 lm/W , colour temp 6500 K, 50 Hz, 240 V complete including all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of light fittings, incl 2 x PVC mounting box for fixing of light complete as directed by Engineer in Charge . Make - Halonix - Cat part No - HLB-07-10-CW- AL SQ or equivalent mentioned in Appendix 'C' to tender
10
145
1452.5
... More
S&F LED Security light fittings 45 Watt with PDC aluminium housing with energy efficient LEDs, Direct modular IP Lens, IP 66 with potted driver and with system efficacy of 125 lm/watt top opening separate driver compartment, IK 07 complete with all accessories such as MS flat iron clamp - 02 Nos , nut, bolts, GI pipe mounting bracket min 32 mm dia of length upto 1.5 mtr etc, prewired, connecting light fitting to light source (ceiling rose) with sheathed three core flexible copper wire in PVC flexible pipe of 15 mm dia all as specified and directed. Make - Halonix - Cat part no - HLSLD-14-45-CWDL-R-P or equivalent mentioned in Appendix 'C' to tender
30
146
4387.5
... More
Dismantling / disconnecting and taking down ceiling fan/ exhaust fan/Wall fan of any sweep along with down rods, MS clamp and accs, and depositing to MES Store complete all as specified and directed by engineer incharge.
10
147
1472.5
... More
S&F exhaust fan 300 mm sweep, wall mounted, Grey colour, metal body with metal body louvers, 3 blade, heavy duty single phase suitable for 230 volts, 50 HZ, 1400 RPM and air deilvery 1250 CMH, and connecting up complete including making electric connection by providing 1.0 Sqmm x 3 core flexible sheathed copper cable from ceiling rose to connector of fan in flexible PVC pipe of min 15 mm dia incl all acessories and including all fixing arrangement to fix on wall by making circular hole of suitable size incl all civil work, make good of surface as adjoining and providing all material required at site for installation of exhaust fan in toilet all as specified and directed . Note : The Contractor shall make all necessary arrangement for fixing fan on wall by making opening including all civil work, make good of surface as adjoining and provide all material required on site (like Ply board/PVC board of min 6 mm thick as base etc) for installation of exhaust fan and cost of the same deemed to be included in quoted rate and nothing extra on this account will be admissible.
5
148
741.25
... More
Supply and fixing energy efficient Brush Less Direct Current (BLDC) ceiling fan 1200 mm sweep confirming to BIS 374-2019 (upto latest amedment) with following specifications complete all as specified and directed by engineer incharge:-
(a) Air delivery min 210 CMM.
(b) Service value more than 6.0.
(c) BEE star rating of product: 5 star (d) Size of ceiling fan in mm: 1200mm (e) No of blades: 3 (f) Input voltage : 1 Phase, 230V, 50HZ, AC, however product shall operate with input voltage 120V-300 V
15
149
2238.75
... More
(g) Total harmonic distoration : <20%
(h) Input power : 28 W (j) Blade thickness: 1.0 mm (k) Type of bearing: double ball bearing (l) Insulation class: B (m) Power factor: minimum 0.95
(n) Enclosure as per clause 4.6 of BIS 374-2019 latest (o) No of canopy with each ceiling fan in Nos: 2 (p) Shank thickness: as per OEM norms
(q) Shackle thickness: s per OEM norms (s) Length of down road without shakle : minimum 300mm (t) Accessories: Nut, Bolt, clamp, Shank (u)Mark of each ceiling fan as per IS 8.1 of IS:374:2019 (upto latest amedment) (v) Manufacturer warranty: 36 months
-
150
-
... More
S&F of heavy duty `u`clamp with anchor fastner of min 3 inch long - 02 Nos for hanging of fan in ceiling complete all as specified and directed by engineer incharge.
5
151
756.25
... More
M&L for Sub Main wiring with PVC insulated FRLSH grade cable LT 1100 Volts grade, ISI marked, conf to IS 694, 2 x 4 Sqmm with one continuous earth wire of 4 Sqmm, PVC insulated unsheathed, multistranded with stranded copper conductor drawn in and including surface `U` PVC conduit heavy grade(HMS) (Ivory colour) not less than 25 mm dia in any type of wall, roof, etc, with all connected fittings, shaddles alongwith one continuous earthwire 4.0 Sqmm and connected to the common earth dolly complete all as specified. (for Power socket on top floor of watch tower up to 15 mtr height) Notes : (i) Two runs of 04 Sqmm cable with 01 run of 4 Sqmm earth wire along with 01 run of PVC conduit shall be measured as one RM.
(ii) All T&P required at site for completing work to be provided and cost of the same deemed to be included in quoted rate and nothing extra on this account is admissible.
80
152
12180
... More
S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 100 amps rated copper busbar,12 way Double door enclosure made up of CRCA sheet steel, powder coated, IP 43, as per IEC 61439-3, suitable for flush mounting and surface mounting, with neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, prefitted masking sheet, reversible door including blanking plates and taking down old US MCB DBs and fixing the DB box flush in wall of any type and making good the distrubed surface to match with the adjoining/ existing surfaces complete all as specified and directed by engineer incharge.
5
153
766.25
... More
S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 100 amps rated copper busbar, 4 way Double door enclosure made up of CRCA sheet steel, powder coated, IP 54, IK 09, as per IEC 61439-3, suitable for flush mounting and surface mounting, with neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, prefitted masking sheet, reversible door including blanking plates and taking down old US MCB DBs and fixing the DB box flush in wall of any type and making good the distrubed surface to match with the adjoining /existing surfaces complete all as specified and directed by engineer incharge.
5
154
771.25
... More
S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 2 way single door enclosure made up of CRCA sheet steel, powder coated, IP 43 including fixing the DB box flush in wall of any type and making good the distrubed surface to match with the adjoing /existing surfaces complete all as specified and directed by engineer incharge.
5
155
776.25
... More
S&F MCB SPN 40 Amps 415V, 10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including making complete connection by providing copper /aluminium cable lugs with suitable size for incoming and outgoing all as specified and directed.
5
156
781.25
... More
S&F MCB SPN 20 Amps 240V, 10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including making complete connection by providing copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and directed by engineer incharge.
10
157
1572.5
... More
S&F MCB SP 6 to 32 Amps 240V, 10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including making complete connection by providing copper /aluminium cable lugs with suitable size for incoming and outgoing all as specified and directed.
50
158
7912.5
... More
Note : For Item No 126 to128 Make of MCB DB Box and MCB shall be of same make.
-
159
-
... More
M&L for GI earth wire 4 mm dia as main earth lead buried in ground/Wall/ ceiling etc, complete all as specified and directed by engineer incharge. (Earth wire beyond 7.50 m in earthing shall be measured under this item)
20
160
3205
... More
M&L for laying 15 mm bore GI pipe, light grade, ISI marked, conf to relevant IS with all fittings, in crossing road/path and in pole/wall up to junction box including necessary clamping etc complete all as specified and as directed by Engineer-in-Charge.
20
161
3225
... More
Taking out old GI earth strip of 32 x 6 mm of LA and relaying/ refixing the same same in existing or new location by providing epoxy insulator of suitable size (min 40 mm) by drilling hole in strip and fixed with sutable size brass nut bolt and double washer (on every 0.5 mtr) complete all as specified and directed by engineer incharge.
15
162
2433.75
... More
M&L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia ,GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts - 03 Nos etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and , watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, concrete pit incl excavation and earth work in any type of soil/ hard strata and testing on completion etc complete (Note:- GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)
10
163
1632.5
... More
Supply, fixing Installing, testing and commissioning, energy efficient, BEE 5 Star rated , storage water heater (Geyser) 25 Litr capacity , white colour, vertical / Horizontal storage type (as per space avilable at site), cylindrical in shape, Shock resistant, rust proof engineering thermoplastic ABS body electrically operated, Single Phase, 230 Volt, 50 Hz, with maximum working pressure 8 Kg/cm2, effficient long life copper heating element of 2000 watt , having adjustable thermostat, thermal cut off indicator, suitable for hard water, having rated power input of 2000 Watt, including supply and fixing heavy duty Hot and cold water flexible corrugated SS connection pipe having high temperature resistant EPDM material with SS braiding, having 450 mm long, 15 mm dia, brass coupler etc, flexible pipe suitable to withstand upto 90 º C for hot water. Geyser shall have steel inner tank, with feroglass coating for corrosion resistance, tank to withstand high pressure rating up to 8 bar, Incoloy glass coated heating element, Adjustable knob for temperature setting, having Swrilflow technology to avoid direct contact between cold and hot water flow for a faster heating and energy saving, CFC free Puf insulation, having heating indicator, having multi function safety valve, child safety mode including all accessories anchor fastner - 04 Nos of suitable size for mounting geyser, 3 core PVC insulated, multistranded copper conductor cable for power supply with metal clad 3 Pin plug top of 15 Amp capacity, complete all as specified and directed by Eng in Charge. Note : Gyser shall be provided with (i) Tank warranty -10 yrs
(ii) Heating element warranty - 03 Yrs.
(iii) Product warranty -02 yrs.
5
164
821.25
... More
Supply and laying of 40 mm outer dia, double walled corrugated DWC pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and directed by engineer incharge.
440
165
72710
... More
S&F 32 mm bore UPVC pipes SDR 11 including fittings , pipe to be fixed to walls / ceiling or laid in floors / trenches including GI shaddle/ clamp for fixing the pipe on wall on every 70 cm complete all as specified and directed by engineer incharge.
25
166
4156.25
... More
Taking down XLPE LT UG Cable of any type and description/size including all accessories from site complete all as specified and directed by engineer incharge.
150
167
25087.5
... More
Supply, Laying, commissioning and testing of UG LT cable XLPE insulated screened PVC bedded, galvanized steel strip armoured, electric power cable (heavy duty) 1100 volts grade, ISI marked, with valid CML No. of stranded aluminium conductor of size 16 sqmm 2 core, laying in undergound in trenches or on surface by providing proper GI clamps or in protection pipe including connecting the cables at both ends by providing suitable size aluminium lugs at the termination ends.
350
168
58887.5
... More
Supply, Laying, commissioning and testing of UG LT cable XLPE insulated screened PVC bedded, galvanized steel strip armoured, electric power cable (heavy duty) 1100 volts grade, ISI marked, with valid CML No. of stranded aluminium conductor of size 6 sqmm 2 core, laying in undergound in trenches or on surface by providing proper GI clamps or in protection pipe including connecting the cables at both ends by providing suitable size aluminium lugs at the termination ends.
210
169
35542.5
... More
M&L for laying 40 mm bore GI pipe, light grade, ISI marked, conf to relevant IS with all fittings, in crossing road/path and in pole/wall up to junction box including necessary clamping etc. complete all as specified and as directed by Engineer-in-Charge.
72
170
12258
... More
M&L for cutting of road / hard standing/ path for laying of cables in underground through protection pipe of size of trench width 45 x depth 45 Cm and making good surface with PCC (1:2:4) type B 1 (using 20 mm graded stone aggregate) complete all as specified and directed by engineer incharge.
24
171
4110
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements