Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Runway Rehabilitation Scheme (rrs) Works Under Age Br-i Of Ge (af) Lohegaon At 2 Wing Afs Pune in Pune, Maharashtra, with an estimated contract value of Rs. 10,16,000. The bid opening date for this tender is 06-11-2026 and the last date for bid submission is 26-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Maha Tender

Opening Date6 Nov 2026
Closing Date26 Nov 2026
Tender Amount₹ 10,16,000 
Notes
Download

Costs

Description

Runway Rehabilitation Scheme (rrs) Works Under Age Br-i Of Ge (af) Lohegaon At 2 Wing Afs Pune

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
M&L for laying and compacting 200 mm thick (compacted thickness) Granular sub base course (GSB) grading as per Grade I as specified in Table 400-1 of MoRTH specification for road and bridge works,2013,in a single layer of compacted subgrade with natural sand ,crushed gravel,crushed stone,crushed slag or combination thereof as per the grading required .The material are mechanically mixed ,spread and levelling on the subgrade by using motor grader of adequate capacity and rolling with vibratory roller of capacity 80-100 KN static weight for achieving required compaction density of atleast 98% of maximum dry density.Consolidating to required gradient and camber ,complete all as specified and as directed by Engr-in-charge.(Note : following Aggregate size and there proportion shall be used (i) 50%- 65 mm aggregate size & (ii) 50% - 40 mm aggregate size)

29.2

-

-

... More
M&L for laying and compacting 200 mm thick (compacted thickness) Wet mix Macadum (WMM) in Two layers of 75 mm (compacted thickness) each and one layer of 50 mm (compacted thickness) grading as per Grade I as specified in Table 400-13 of MoRTH specification for road and bridge works,2013, manafactured in WMM plant, material comprising of clan ,crushed graded aggregate and granular material premixed water to dense mass,spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight for achieving required compaction density of atleast 98% of maximum dry density.Consolidating to required gradient and camber ,complete all as specified and as directed by Engr-in-charge.The finished surface tolerence shall be as per Table 900-1 of MoRTH specification for road and bridge works,2013 (Note : following Aggregate size and there proportion shall be used (i) 50%- 25 mm aggregate size & (ii) 40% - 10 mm aggregate size & (iii) 10 % -stone dust)

29.2

-

-

... More
M&L for applying evenly a tack coat of paving bitumen VG-10 @ 10 Kg per 10Sqm ,complete all as specified and as directed by Engr-in-charge.

29.2

-

-

... More
M&L for bituminous premixed asphaltic dense concrete 150 mm thick (layed in layers of 50mm each) consolidated thickness with paving bitumen VG 30 @ 6% binder content by wt of total mix using paving bitumen laid with mechanical paver , rolled and consolidated to reqd camber complete all as specified and directed by Engr-in charge. Note for Srl Item No 1 to 7:- (a) Notice/Verbal order for the RRS practice will be issued by the GE in short notice and in urgent manner.The contractor will be ready to do RRS practice in any time upto the completion date of contract. (b) During RRS contractor has to do Crater repair in Runway/Taxi track/Dispersal according to the direction issued by GE/Engr-in-charge. (c) Rate in respect of services provided vide notes (a) & (b) cited above shall deemed to be included in quoted rate of contractor in the BOQ.Nothing extra shall be paid in this account.

29.2

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.