Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Special Repair To Balance Road From Old Fcm Complex To Hsoat And Gssi At Cme Pune Under Ge (cme) Khadki in Pune, Maharashtra, with an estimated contract value of Rs. 38,89,200. The bid opening date for this tender is 16-10-2026 and the last date for bid submission is 17-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Maha Tender

Opening Date16 Oct 2026
Closing Soon17 Nov 2026
Tender Amount₹ 38,89,200 
Notes
Download

Costs

Description

Special Repair To Balance Road From Old Fcm Complex To Hsoat And Gssi At Cme Pune Under Ge (cme) Khadki

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
M & L for laying and compacting 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MORTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and consolidating to required gradien and camber . The finished surface tolerances to be as per Table 900-1 of MORTH specifications for Road and Bridge works 2013 complete all as specified and directed by Engineer-in-charge.

86

2101

-

... More
M &L Preparing unsurfaced WBM/WMM/bituminous macadam surface by brushing with wire brush for removing caked mud etc., sweeping with brooms, and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc and for applying evenly a tack coat with bituminous primer VG-10 @ 7.5 kg per 10 Sqm with sprayer over existing surface etc complete all as specified and directed by Engineer-in-charge.

96

748

-

... More
M & L Premix bituminous macadam bitumen (VG-30) with 4% binder content using paving bitumen) by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed by Engineer-in-charge.

80

8915

-

... More
M & L for applying evenly a tack coat with bituminous primer( paving bitumion) VG-10 @ 2. 5 kg per 10 Sqm with sprayer over bituminous macadam/existing black top etc complete all as specified and directed by Engineer-in-charge.

636

138

-

... More
Preparation of existing black top surfaces by brushing with wire brushes and removing caked mud etc sweeping with broom and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed by Engineer-in-charge.

572

216

-

... More
M & L for bituminious premix asphaltic semi dense concrete 40mm thick consolidated thickness with 5.5% binder content( paving bitumen VG- 30) by weight of total mix all as per job mix formula, duly rolled and compacted to required camber and gradient with 8-12 tonne power roller and vibrating roller etc complete all as specified and directed by Engineer-in-charge. Note : Hand rolling, ramming shall be carried out in angles, edges, bell mouth, curves etc. where a roller cannot be worked, with entire satisfaction of Engr-in-charge, The contractors quoted rates shall be deemed to include the following elements (i) The contractor shall got the mix design done through Govt approved lab and same shall be got approved from GE before incorporating in the work. (ii) In case variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quanity of bitumen shall be adjusted with price adjustment.

96

3828

-

... More
M & L for bituminious premix asphaltic semi dense concrete 30mm thick consolidated thickness with 5.5% binder content( paving bitumen VG- 30) by weight of total mix all as per job mix formula, duly rolled and compacted to required camber and gradient with 8-12 tonne power roller and vibrating roller etc complete all as specified and directed by Engineer-in-charge. Note : Hand rolling, ramming shall be carried out in angles, edges, bell mouth, curves etc. where a roller cannot be worked, with entire satisfaction of Engr-in-charge, The contractors quoted rates shall be deemed to include the following elements (i) The contractor shall got the mix design done through Govt approved lab and same shall be got approved from GE before incorporating in the work. (ii) In case variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quanity of bitumen shall be adjusted with price adjustment.

572

2973

-

... More
M&L For preparing bituminous surfaces of road and marking 2.5 mm thick center lines,stop lines,dashes,arrows etc and the like n. exc 10 cm wide on road pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262 - 1989 with special applicator machine including glass beads confirming to BS 6088,dry,free from lumps,good reflectivity and durability applying by drop on method al as specified in irc 35 etc. all as per manfacutres instruction complete all as specified and directed by Engineer-in-charge.

164

460

-

... More
S&F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed by Engineer-in-charge.

250

367

-

... More
S&F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engineer-in-charge.

42

801

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.