Military Engineer Services Tender

Lumpsum price worked out by the contractor for “INTERNAL ELECTRIFICATION ” as listed in Sch ‘A” part IV representing above / below the lumpsum price of Rs.348310.84 as inserted by MES for Sch ‘A’ Part IV on srl page No.30

Lumpsum price worked out by the contractor for “EXTERNAL WATER SUPPLY" as listed in Sch ‘A” part V representing above/below the lumpsum price of Rs.7979.96 inserted by MES for Sch ‘A’ Part V on srl page No.31

Lumpsum price worked out by the contractor for EXTERNAL ELECTRIFICATION ” as listed in Sch ‘A” part VI above/below the lumpsum price of Rs.18882.50 as inserted by MES for Sch ‘A’ part VI on srl page No.32

Lumpsum price worked out by the contractor for “ROAD/ PATH/ CULVERT/HARDSTANDING" as listed in Sch ‘A” part VII representing above/below the lumpsum price of Rs.61857.33 inserted by MES for Sch ‘A’ Part VII on srl page No.33

Lumpsum price worked out by the contractor for “SEWAGE DISPOSAL" as listed in Sch ‘A” part VII representing above/below the lumpsum price of Rs.50357.45 inserted by MES for Sch ‘A’ Part VII on srl page No.35

Lumpsum price worked out by the contractor for “REFFRIGERATION AND AIR CONDITIONING" as listed in Sch ‘A” part VII representing above/below the lumpsum price of Rs.39327.91 inserted by MES for Sch ‘A’ Part VII on srl page No.35 (A)

SCH 'A' PART - X ( MISC ITEMS)

Supply and fix modular motor starter with MCB 20A, 2 module for AC with on and off button complete all as specified and directed

Supply & fixing of sheet metal enclosure Vertical TPN DB 4 way double door As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase with 2 Neutral bar, 2 earthbar and Cable ties for cable management, fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for easy of installation, prefitted masking sheet, reversible door for IP 54 DB's, alongwith 160 Amp MCCB as incomer complete all as specified and directed.

Supply and fix double wall corrugated high density polymer ethyl (HDPE) pipe for laying of electric cable of size 50 mm outer diameter and 38 mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches (Including cutting of roads or any others hard surfaces and making good disturbed surfaces), wall, poles including bends, sockets and other connected accessories complete all as specified and directed.

Supply, installation, testing and commissioning of Desert cooler 6000 cfm capacity of size 66 x72 x92 cm , 20 SWG ,with wooden shelving pad for evaporative type desert cooler with water tank of height 20cm duly fitted with side panels made out of 20 gauge PGI sheet & grill with fins electrical wiring and connection with ON/ OFF switch piano type ,and switches for pump and regulator to regulate the speed of fan with suitable condensor with distribution PVC cup and elbow, PVC pipe connection, PVC float valve , PVC cable 3 core 23/.0076 - 3 Mtr fitted with 01 No. 5 Amp top plug , motor submersible pump , capacitor complete including powder coated painting the complete body internally and externally with two coats of synthetic enamel paint of approved colour over a coat of red oxide primer complete including necessary internal wiring with PVC insulated multistrand copper conductor cable of suitable size and deliver fresh air, which circulate air, with power saving technology, reduce temperature , cover the three side & grill panel completely all as specified and as directed. Contd... 10.50

10.40 Contd.... (a ) Submerssible pump 18 watt ,220 V , AC supply , Max discharge of water -12 Ltr/Minflow rate-01 Nos (b) Fan Motor single phase AC induction motor heavy duty ,copper winding 230 volt ,50 Hz ,1350 rpm , insulation - "E"class, ISI Mark confirm IS-996-1979 output-106Watt , maximum current 1.5 Amp -01 Nos (c) Capacitor -4 Mfd 440 plus minus 5% , ISI mark -01 No (d) Discharge of Air Flow - front side (e) Front Grill Air Divertor size-50 x58 x7 cm Note:- (i) Minimum warranty 2 years on product, 10 years on motor & 5 years pump . (ii) Item mfg date should not be older than 06 Months from installation date. (iii) All items must have a permanent type vinyl sticker on outer body bearing following details and quoted rate are deemed to inclusive cost of sticker. (a) Machine Srl No._____________ (b) MES No______________ (c) Date set to work.____________ (d) PRB Page No ______________. (e) Location__________________ (f) CA No.________________________

Shifting of Air conditioning from old office to new location within distance of 1km properly in suitable vehicle. Dismantling connections and copper tubing, refixing including required accessories like mounting stand, copper tubing required and gas charging for indoor and outdoor units complete all as specified and directed.