Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Construction Of 12 Md Accn For Offrs Under Ge (s) Ahilyanagar. in Ahmednagar, Maharashtra, with an estimated contract value of Rs. 9,00,00,000. The bid opening date for this tender is 07-11-2026 and the last date for bid submission is 12-12-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Maha Tender

Opening Date7 Nov 2026
Closing Date12 Dec 2026
Tender Amount₹ 9,00,00,000 
Notes
Download

Costs

Description

Construction Of 12 Md Accn For Offrs Under Ge (s) Ahilyanagar.

AI Insights

Unlock AI Insights for this Tender

Sign in to request AI-powered insights, eligibility criteria and automated analysis for this tender.

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Report Missing Document

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Total amount of Sch 'A' Part-III (Internal Water Supply)

1

443739

-

... More
Total amount of Sch 'A' Part-IV (Internal Electric Supply)

1

2777891

-

... More
Total amount of Sch 'A' Part-V (Road, Paths & Culverts )

1

2556080

-

... More
Total amount of Sch 'A' Part-VI (Sewage Disposal)

1

695340

-

... More
Total amount of Sch 'A' Part-VII (Area Drainage)

1

1919971

-

... More
Total amount of Sch 'A' Part-VIII (Compound wall, Fencing and Gate)

1

1058553

-

... More
Total amount of Sch 'A' Part-IX (Hot Water Supply)

1

428426

-

... More
Total amount of Sch 'A' Part-X (External Water Supply)

1

276398

-

... More
Total amount of Sch 'A' Part-XI (External Electric Supply)

1

1011400

-

... More
Total amount of Sch 'A' Part-XII (Rain Water Harvesting)

1

308993

-

... More
SCHEDULE 'A' PART-XIII (MISCELLANEOUS B/R AND E/M WORKS)

-

-

-

... More
S&F for fancy type, 15 mm dia, Pillar taps, Swan neck (wall mounted) type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and directed. Make: Cat No. F1015201 of Cera or Techno-commercially equivalent model.

12

-

-

... More
S&F for fancy type, two way bib tap 15mm dia, Chromium plated, cast copper alloy, with wall flange and aerator screwed down for iron pipe or for brass ferrule complete all as specified and as directed. Make: Cat No. F1015161 of Cera or Techno-commercially equivalent model.

48

-

-

... More
S&F for Overhead shower rose 125mm size with 200mm long shower arm, Chromium plated, Fancy type, and wall flange complete all as specified and as directed. Make: Cat No. F7020111AB of Cera or Techno-commercially equivalent model.

36

-

-

... More
S&F for Central hole Wash Basin Mixer, Chromium plated, cast copper alloy, for mixing hot and cold water 15 mm bore screwed for iron pipe and fixed complete all as specified and as directed. Make: Cat No. F2014461/F1015454 of Cera or Techno-commercially equivalent model.

36

-

-

... More
S&F for Kitchen sink mixer (wall mounted), Chromium plated, cast copper alloy, Fancy type, for mixing hot and cold water with swivel spout, 15mm bore, screwed for iorn pipe and fixed complete all as specified and as directed. Make: Cat No. F1015501 of Cera or Techno-commercially equivalent model.

36

-

-

... More
S&F for Modular switch two way, 6 Amp, one module, 230V all as specified and directed.

12

-

-

... More
Supply and fix LED Tubelight fitting 20 W extruded aluminium housing battens are equipped with lumen efficacy of 100 LM/W and milky white, special polycarbonate diffuser, for glare free efficient light distribution with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed.

306

-

-

... More
S&F for Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 10 Watt with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed.

36

-

-

... More
S&F for Double door Sheet metal enclosures factory made DBs 6 way TPN, 415 volts Concealed in Wall, protection class IP-43, suitable for fixing of MCBs etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting with 200 A Copper Busbar, With Neutral bar, Earthbar and Cable ties for Cable management, Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

3

-

-

... More
S&F for Modular TV Socket 1 module including PVC Conduit pipe concealed in wall of suitable dia, complete all as specified and directed.

12

-

-

... More
Supply and Installation of Smart RF Three Phase Meter with the following specifications: (a) AC Three Phase Four Wire, Tamper Proof, Static Meter of Class 1.0, 415 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt cellular communication facility with self healing Mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry. (b) Meter Should support sending the following data : 15/30 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, monthly billing survey for Cumulative Energy and Max Demand to software (c) Meter should have connect / disconnect functionality operable from billing software (d) The meter should support open communication protocol DLMS with the software. Notes: 1. The meter shall be compactable with existing smart meter software of the station.

12

-

-

... More
S&F for Weather proof SMC Meter boxes Doubled hinged doors and suitable for fixing of min 04 Nos of 3 phase smart meters and all std connections etc all as specified and directed.

3

-

-

... More
S&F for Modular Kitchen Chimney auto clean sense with min 1250Cum/Hour suction, 185W rated Power smart ON & Auto clean, silent chimney with filterless technology and efficient heat auto clean alongwith flexible duct as per OEM up to exhaust and all other connected accessories and fittings for successfull installation of the chimney including necessary civil work complete all as specified and as directed. Make:Havells/ALNAIR Cat No. GHKCNAZK000 or Techno-commercially equivalent model.

12

-

-

... More
Supply, installation, testing and commissioning for hot water Geysers of not less than 25 Litre capacity 5 Star rated, vertical type having digital temparature display and shock resistance & rustproof Engineering Thermoplastic body including fixing bolts, nuts grouted into the wall and necessary cement work, making good to disturbed surface of wall, giving electric, hot and cold water pipe, tap etc and water connection and testing after installation with PRCD plug top of suitable rating complete all as specified and as directed. Make:V-Gaurd model Victor Plus / Havells Model Velora + or Techno-commercially equivalent model.

36

-

-

... More
M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.0 mm thick single coat as a centre line or edge line etc, road marking n exc 100 mm width using thermo plastic paint (Hot application) white/yellow by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter fillers etc, thermoplastic requirement for glass beads shall be confirming to BS-6086 of most specification including spraying of glass beads etc complete all as per manufacturer's instructions and complete as all specified and directed.

45

-

-

... More
M&L for Cutting existing 80 mm dia GI pipe for inserting Tee of size 80x80x80 mm and excavation etc complete all as specified and directed

2

-

-

... More
M&L for construction of valve pit/chamber of Internal dimensions 900 mm x 900 mm x 900 mm, using PCC 1:4:8, type D-2, using 40mm graded stone aggregates for foundation, 23 cm thick, brick wall built in cement mortar (1:4) ,15 mm thick rendering all around the brick work in cement mortar (1:6), 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregates in coping including necessary form work, 3 coats of white wash on rendered surfaces and on coping, 5 mm thick mild steel top sheet cover with frame made out of 40x40x6 mm angle iron, locking arrangement, including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

2

-

-

... More
Supply, installation, testing and commissioning of outdoor, of AC three phase, 50 HZ, capacity of not less than 100 KVA ,IS 1180 ( PART-I) : 2014, LEVEL 3 transformer step down, out door type 11000/433 Volt (at No Load) copper wound, oil immersed, naturally cooled with external cooling tubes, core type delta connected on primary (HV) side and star connected on secondary (LV) side in accordance with vector symbol DYN-11/vector group-4) with neutral brought on secondary (LV ) Side & having tapping in equal steps of 2.5% from (+) 5% to (-) 7.5% on primary side by means of hand operated off load tap change /correct LT voltage on secondary side including provision of all necessary / standard fittings mainly comprising of:- (a) One cable box on primary HV side having cable glands suitable for 3 core 95 sqmm XLPE 11 KV HT Cable consisting of 03 nos of porcelain HT bushing with brass/gun metal bushing rods complete with nuts and washers. (b) One cable box on secondary (LV) side consisting of 04 Nos porcelain bushing with GM bushing rods complete with GM nuts and washers with one nos of cable gland suitable for connecting of out going LT PVC sheathed armoured cables of size 3.5 Core 120 sqmm.

1

-

-

... More
(c ) Oil conservator with filter type, drain valve and oil level gauge. (d) Dehydrating breather with first fill of dehydrating agent. (e ) Explosive Vents (f) Thermometer pocket on tank cover. (g) One No 100mm dia dial type thermometer vapour pressure type having range 0-120 degree centegrade with temp reading pointer, max temp indicator and resetting device. (h) Rating plate with terminal markings. (j) Two earthing terminals on tank/tank cover to facilitate fixing of 32x6mm GI Earth strip. (k) Oil Level gauge. (l) Oil Drain and filter valve (m) Oil filter hole with cap/plug with connections complete. (n) Lifting Lugs (o) Air Relief valve plug (p) Four plain solid cast steel detachable rollers. (q) First fill of fresh oil conforming to relevant IS and tested upto 40 KV dielectric strength. (r) Extra bushing for neutral outside the LT cable box for providing independant earthing for neutral.

-

-

-

... More
(s) Provision of 02 Nos of danger board 250x200mm size made out of 1.6 mm thick MS Plate, vitreous enameled white with letters, figures in marathi, Hindi and english of voltage and conventional skull and bones in signal red colour , one at HT side and other on LT side . (t) Any other fittings /accessories so as to conform the whole transformer to IS-2026. NOTE:The transformer must have BIS certificate, BEE star labeled and valid type test report duly issued by NABL accredited BIS lab.

-

-

-

... More
M&L for construction of plinth (of size 2.0m x 2.0mx 2.5m) including excavation in trenchs in any type of soil,PCC 1:4: 8 in foundation fly ash bricks machinary in cement mortor1 : 6 ,filling with moorum inside the plinth and RCC 1:2:4 over plinth including 16 mm bar reainfrocement with center to centre distane 100mm and external surface of masonary shall be plasterd with cement morter 1:4 and painted with weather coat paint (double coat paint) of shade complete all as specified and as directed

1

-

-

... More
Supply, install, testing, commissioning complete 11KV Ring Main Unit for 4 Nos (01 for incoming and 03 Nos outgoing) breaker of capacity 400 Amps each, outdoor type, copper bus bar of suitable capacity with rupturing capacity of 350MVA with enclosure for mounting 01 Nos SF6 Breakers and 03 Nos Load Break Switch with interlocking arragement as specified in IE Rules & for clearance, safety and operation inside the enclosure, CPRI tested, approved and certified including cable termination chamber. SF circuit Breaker shall be front access, rating for single SF6 circuit breaker are as follows:- (Note: Rates shall be inclusive with 01 Nos SF6 Circiut Breakers for incoming and 03 Nos outgoing load break switch) (i) Circuit breaker, Rated Current: 400A, closing and Tripping coil: 24V DC, Spring Charging motor : 230V AC, STC:21 KA for 03 sec (ii) BIL: 12/28/75KVP (iii) CT Ratio- 200-100/1+1A (iv) Core 1 : Burden-10VA, class:1.0 (v) STC :25KA for 1Sec (vi) BIL: 12/28/75KVP (vii) Potential Transformer with 3.15A HT Fuse ( Fixed type)

1

-

-

... More
(viii) PT Ratio : 11KV/RT3/110/RT3/110/3 (ix) Core 1 : Burden-50VA, class:1.0 (x) Core 2 : Burden-50VA, class:3P (xi) BIL: 12/28/75KVP (xii) V.F 1.2 are continuous & 1.9 for 8hours (xiii) Protection Relay (a) 3 over current +1E/F Relay (RS-485 communicable) (b) Protection 50,51, 50N.51N, 86 (c) CT Secondary-1A (d) Mounting : Flush mounting (e) Aux supply : 24V DC in built (xiii) Master Trip Relay ( Hand Reset Electromechanical type) (a) Protection-86 (b) Mounting-Flush Mounting (c) Aux supply : 24V DC (xiv) Metering Equipment (Incoming & Outgoing) (a) Digital Multifunction Meter (RS-485-Communicable), Class-1.0, Cut out size 92x92, Aux Supply : 230V AC (b) Digital Voltmeter, Class 1.0,Cut out size 92x92, Aux Supply : 230V AC & 12V DC (xv) Accessories (a) TNT Switch, Contacts: 02 NO & 2NC (b) Local Remote Switch, Contacts: 02 NO & 2NC (c) Space heater 100W

-

-

-

... More
(d) Thermostat Temperature Range: 30-90, 15A 3 Pin socket for 230 V AC Supply Current 1-A (e) Toggle switch, Push button for Trip circuit Supervision check, Contacts:02 NO (f) TB for CT & PT circuit, Disconnecting type (g) Type KUTSD6 (h) TB for control circuit, Non-Disconnecting type (j) Aux Voltage :230V AC (k) Hooter, Aux Voltage :230V AC (l) Battery Charger 5A (m) 230V AC I/P & 24 V DC O/P (n) Battery 12 V DC, 7AH (xvi) Indication Lamp (a) Red colour lamp, 24 V DC : For Breaker ON (b) Green colour lamp, 24V DC : For Breaker Off (c) Blue colour lamp, 24 V DC : For Breaker Spring Charge (d) Amber colour lamp, 24 V DC : For Auto Trip (e) White colour lamp, 24 V DC : For Trip Circiut Supervision (f) Red colour lamp, 63.5 V AC : For R Phase Healthy (g) Yellow colour lamp, 63.5 V AC : For Y Phase Healthy (h) Blue colour lamp, 63.5 V AC : For B Phase Healthy (xvii) Breaker Rack in and out handle (xviii) Testing

-

-

-

... More
(a) Factory Tests shall be carried out in presence of Rep of Accepting Officer as per IEC standard-62271-100 /other relevant standards.The contractor has to be inform the same n advance to the dept. (b) Following test reports for 01 Nos SF6 breaker shall be submitted before applying payments:- (i) Insulation resistance test (ii) Operation time test (iii) Contact resistance test (iv) Pre-insertion resistance (PIR) test (If applicable) (v) SF6 gas leak test (vi) High Voltage withstand test (vii) Secondary test to ensure the proper functioning of the live line indicators, fault passage indicators and relay (vii) Mechanical Operation Test (i) PCC founddation as per OEM drawing/site requirements for RMU to be done in this item rate by contractor (ii) Contractor has to arrange T&P for pre-commissioning testing.

-

-

-

... More
Supply, install, testing, commissioning complete 11KV Ring Main Unit for 01 Nos for incoming and 01 Nos for outgoing breaker of capacity 400 Amps each, outdoor type, copper bus bar of suitable capacity with rupturing capacity of 250MVA with enclosure for mounting 01 Nos SF6 Breakers and 01 Nos Load Break Switch with interlocking arragement as specified in IE Rules & for clearance, safety and operation inside the enclosure, CPRI approved including cable termination chamber. SF circuit Breaker shall be front access. rating for single SF6 circuit breaker are as follows:- (Note: Rates shall be inclusive with 01 Nos SF6 Circiut Breakers for incoming and 01 Nos outgoing load break switch) (i) Circuit breaker, Rated Current: 400A, closing and Tripping coil: 240V DC, Spring Charging motor : 230V AC, STC:21 KA for 03 sec (ii) BIL: 12/28/75KVP (iii) CT Ratio- 200-100/1+1A (iv) Core 1 : Burden-10VA, class:1.0 (v) STC :25KA for 1Sec (vi) BIL: 12/28/75KVP (vii) Potential Transformer with 3.15A HT Fuse ( Fixed type) (viii) PT Ratio : 11KV/RT3/110/RT3/110/3 (ix) Core 1 : Burden-50VA, class:1.0

1

-

-

... More
(x) Core 2 : Burden-50VA, class:3P (xi) BIL: 12/28/75KVP (xii) V.F 1.2 are continuous & 1.9 for 8hours (xiii) Protection Relay (a) 3 over current +1E/F Relay (RS-485 communicable) (b) Protection 50,51,50N.51N,86 (c) CT Secondary-5A (d) Mounting:Flush mounting (e) Aux Supply:24V DC in built (xiv) Master Trip Relay (Hand Rest Electromechincal Type) (a) Protection-86 (b) Mounting-Flush Mounting (c) Aux Supply:24V DC (xv) Metering Equipment (Incoming & Outgoing) (a)Digital Multifunction Meter (RS-485-Communicable), Class-1.0, Cut out size 92x92,Aux Supply:230V AC (b) Digital Voltmeter,Class 1.0,cut out size 92x92,Aux Supply:230V AC & 12V DC (xvi) Accessories: (a) TNT Switch,Contact:02NO & 2NC (b) Local Remote Switch, Contacts :02 NO & 2NC (c) Space heater 100W (d) Thermostat Temperature Range:30-90 ,15A 3Pin Socket for 230V AC Supply Current 1-A

-

-

-

... More
Supply and lay HDPE PIPE (PE 100, SDR-21, 6 Kgf/Sq.Cm) IS 4984-2016) 110 mm dia for laying of HT/LT cables etc complete with all accessories complete all as specified and directed.

950

-

-

... More
Supply & laying DWC Cable duct pipe of size 50 mm bore confirming to IS :16205 Part 24,450-N for laying of LT cables etc complete with all accessories complete all as specified and directed.

380

-

-

... More
S&F for PCC Cable route Indicator with suitable reinforcement of size 50x10x10 cm with letter inscribed on both side as "MES HT CABLE " of specified front side not less than 30mm as directed and mounted on PCC 40x30x30 cm complete using PCC 1:2:4 B-1 using 20mm graded stone aggregate and applying two coat of cement base paint, complete all as specified and directed.

12

-

-

... More
S&F for Octagonal hot dip galvanised stret light pole of 9.0mtr having top dia 70mm and bottom dai 130mm and min 3mm thickness with base plate 200x200x16mm alongwith hot dipped galvanized single arm bracket 1.0m long including painting with two coats of aluminium paint over a coat of red oxide primer including foundation of size 450x450mm and depth 1.6m with RCC (1:2:4) B-1 foundation and foundation bolts as per OEM recommandations/site requirement complete all as specified and directed. Note: Excavation only shall be measured and paid under relevent schedule items.

10

-

-

... More
M&L for Sword type single arm 1 meter long brackets made out of hot dip galvanised and painting the bracket and clamps with 2 coats of synthetic enamel paint over a coat of red oxide Zinc chromate primer complete all as specified and directed.

10

-

-

... More
Supply and fixing PVC insulated and over all PVC sheathed, stranded copper conductor wire 1.5 sqmm x 3 core ISI marked.complete from light fitting to pole junction box complete all as specified and directed.

100

-

-

... More
Supply and fixing of 40 Amp time light DB with TP 40 amps MCB at incomer with 40 Amp AC-3 duty contractor along with design as per IEC 61439, material and CRCA sheet up to 1.2 mm with Asrtonomical time switch complete pre-wired, IP 55 protection auto manual selector switch for auto manual selector switch for auto manual operation, power indicator and 2 Amp fuse for protection of time switch, input output terminal block of termination of input output cable with gland special provision of incorporation of under voltage over voltage relay for protection of incarporated contractor coil, including the cost of labour charges for erecting on pole /walls/panel including clamps, nut bolts to complete the job up to the entire satisfaction of Engr in charge of work

1

-

-

... More
Supply, install, testing and commissioning factory made and CPRI tested, certified and approved. LT feeder pillar box (KIOSK) out door type, floor mounted, compartmantalised and IP-54 suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, all as specified and directed, having bus bar chamber with insulated Aluminium bus bars 250 amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, made of 3.15mm CRCA MS sheet and with base frame of 50x50x6mm angle iron, powder coated, Front and rear opening type with aprons for cable entry with double door shutter and locking arrangement with and including following items. Incoming (a) MCCB 160 amps, 4 pole, 36 KA with adjustable thermal release, 50 Hz, 415 volts grade - 01 No. (b) Bus bar electrolytic grade Aluminium and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 400 Amp, 4 pole, not less than 60cm long mounted on insulators for outgoing supply. (c) Digital volt and ammeter with selector switch and CT's set - 01Set. (d) Neon indicating lamps (R, Y & B) -01 Set. (a) MCCB 63 amps, 4 pole, 16 KA with adjustable thermal release, 50 Hz, 415 volts grade - 4 No. (Outgoing) (Notes : The rate quoted shall include for earth work & excavation for angle iron frame for foundation of panel board upto 0.50 m below GL in any type of soil & PCC (1:4:8), D2 filling in foundation the ground clearance of panel board shall be 0.40 m GL to the bottom of panel board).

1

-

-

... More
M&L for 45 to 50mm thick precast prestressed reinforced cement concrete solid slabs finished fair on both sides in cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) (with interlocking joints for fixing in precast columns) including mouldings and fixed as compound wall in grooves of prestressed posts as per approved design and pattern and set in cement mortar 1:4 complete all as specified and as directed. Notes : (a) The cost of reinforcement and form work shall deemed to be included in rate quoted. (b) Surface area of slabs excluding embedded porton in grooves shall be measured for payment. (c) Pre-stressed concrete posts shall be measured and paid separately under respective item.

230

-

-

... More
Supply, installation, testing and commissioning of 1 HP, single phase, 230V, 50 Hz, self-priming monoblock water pump set, capable of delivering 2600 LPH at 24m total head, complete with DOL starter, weather proof motor protection cover, suitable stand/supports, and 3-core copper PVC insulated and sheathed flexible cable of suitable size from starter to motor, including all necessary cable glands, lugs, termination and connected accessories, complete all as specified and as directed.

2

-

-

... More
S&F for Rotational moulded polyethylene water storage tanks colour white (cylindrical vertical with closed top), not less than 5000 litres capacity, tripple layered, in position and screwed to uPVC/GI pipe and connecting complete all as specified and as directed.

6

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.