Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Special Repairs To 24 X Single Officers Qtrs In F Block Of P 30 At Milit Girinagar Pune 25 in Pune, Maharashtra, with an estimated contract value of Rs. 48,71,100. The bid opening date for this tender is 09-05-2025 and the last date for bid submission is 07-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date9 May 2025
Closing Date7 Jun 2025
Tender Amount₹ 48,71,100
Costs
EMD
₹ 97,500Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_707574_1Tender No
GE I R AND D GNR TOKEN 103 OF 2024 2025Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6, complete all as specified and as directed .
2.5
-
-
... More
Taking down chowkats or frames of wooden or steel window exc 1.5 sqm but not exc 4.00 Sqm with Shutters (without taking off shutters from the frames) complete all as specified and as directed.
30
-
-
... More
Taking down chowkats or frames of wooden or steel exc 1.5 sqm & n.exc. 4 Sqm with Shutters (without taking off shutters from the frames) complete all as specified and directed.
30
-
-
... More
S & F 105 x 60mm size pressed steel frames for doors with one or more rebates incl necessary fixing luges, hinges, lock strike plates etc. complete all as specified and directed.
144.3
-
-
... More
M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in door frame filling and similar work filling complete all as specified and directed.
0.90909
-
-
... More
S&F Flush shutter solid core 30mm Thick with block board core and plywood face panels commercial type on both side with lipping/frame to match complete all as specified and directed.
47.519999999999996
-
-
... More
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm & fixed with stainless steel wire staples complete all as specified and directed.
36
-
-
... More
M&L for preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
174.8736
-
-
... More
S & F IInd class hard wood 30mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass, gauge, etc. edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass,etc; size of members of shutters as specified in SSR Part I Sectin 8, clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed.
38.016000000000005
-
-
... More
M&L for 0.9 mm thick decorative laminate type 1,of surface finish, colour and pattern as approved by Engr-in-Charge/GE(I), fixed with approved adhesives as per manufacturer's instructions complete all as specified and directed.
290
-
-
... More
S&F in repair aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm complete all as specified and directed.
72
-
-
... More
S&F in repair aluminium anodised barrel tower bolts of extruded section 200 mm long. complete all as specified and directed.
144
-
-
... More
M&L in repairs 140 mm long door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed.
72
-
-
... More
S&F in repair aluminium handles, anodised, cast type, of size 150 mm complete all as specified and directed.
144
-
-
... More
S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm complete all as specified and directed.
54
-
-
... More
M&L for 200 mm long brass, skelton tower bolts with cast brass plate and staples and rolled or drawn brass bolt and fixed complete all as specified and directed.
96
-
-
... More
M&Lfor 140 mm long door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed.
48
-
-
... More
S&F 150mm long extruded brass handles, fabricated type polished complete all as specified and directed.
96
-
-
... More
S & F butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as specified and directed.
90
-
-
... More
S&F 300mm, Brass ordinary rat tail rod pattern springs including roller and roller plate including fixing to door complete complete all as specified and as directed.
24
-
-
... More
S&F in repair Stainless steel fancy chromium plated 25mm dia as in curtain rods with domes bothside of rod & chromium plated brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc all as specified and directed by Engr-in-Charge complete all specified and as directed
300
-
-
... More
S&F stainless steel chromium plated 6 Pin, 45Cm to 60Cm long hanger fixed to wall with screws complete complete all as specified and as directed.
24
-
-
... More
Dismentling wrought iron or mild steel work such as grill/roof purlin etc not otherwise provided for complete all as specified & directed.
10
-
-
... More
M&L Non structural mild steel work in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars conforming to Fe-290.Gde-E-165 complete all as specified and directed.
800
-
-
... More
M&L for two coats of synthetic enamel paint over a coat of red oxide primmer on new steel surfaces exc. 10 cm width or girth etc. complete all as specified & directed.
170
-
-
... More
Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering complete all as specified and directed.
250
-
-
... More
Supply and fix for polycarbonate fibreglass reinforced plastic (FRP ) translucent corrugated/ Plain sheeting 6.00 mm thick fixed with coach screw and washer in roof, wall etc.weather resistant ,made from fine anti UV film and resins complete all as specified and as directed by Engr-in-Charge
150
-
-
... More
S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified complete all as specified and directed.
100
-
-
... More
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets/ AC boards, any thickness, including cover fillets complete all as specified and as directed.
150
-
-
... More
M&L for false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit. 4mm thick High Pressure Steam Cured Everest Non Asbestos Fibre Cement Designer Ceiling Board (Density>1200 Kg/m3, Modulus of Rupture (M.O.R)-15.85 MPa, Thermal Conductivity(K)-0.0872 W/mK) of size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336:1993, (Reaction to fire-A2-s1-d0) tested as per EN13501 Part-I & BS-476 Part 4,5,6&7, should be placed in the Grid module to form a False Ceiling complete all as specified and directed.
150
-
-
... More
M&L for roughening surfaces of old concrete floor of sunken portion by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3Kg/sqm complete all as specified and directed.
20
-
-
... More
M&L for Rendering 10mm thick in CM 1:4 on concrete surfaces finished even and smooth using extra cement mixed with and approved water proofing compound @ 3% weight of cement and applying two coats of Roff Hyguard EX Rezone Chemicals or equivalent make complete all as specified and as directed.
20
-
-
... More
M&L for PCC 1:5:10 type E-2 (using 40mm graded brick aggregate) lean concrete for filling sunken floor complete all as specified and directed.
0.5
-
-
... More
M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick complete all as specified and directed.
84
-
-
... More
M&L double charged Vitrified tiles 8 to 10mm thick (square/regtangular) polished , area of each tiles n.exc. 0.36 sqm as in flooring etc. and jointed neat in cement slurry and pointed in white or colour cement to match over with and including 15 mm thick rendering in CM 1:4 complete all as specified and directed.
50
-
-
... More
M&L for coloured glazed vitrified ceramic tiles 8 to 10mm Thick (square/Rectangular) polised, as in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 10mm thick backing coat in CM (1:3) complete all as specified and directed.
10
-
-
... More
M&L for non skid, ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exceeding 0.06sqm but Not Exceeding 0.11 Sqm coloured tiles, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed.
24
-
-
... More
M&L Glazed ceramic coloured tiles in vertical surfaces 300 x 450 x 7mm as in dado/skirting etc.including highlighter/claddding tiles as required and jointed neat in cement slurry and pointed in white or colour cement to match over 10mm thick screed bed in CM 1:4 complete all as specified and as directed.
150
-
-
... More
M&L for mirror polished Kota stone slab 20-25mm thick in Tread of steps in single pieces incl two numbers of grooves of size 3mmx3mm and rounding to edge, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing with and incl 10mm thick screed in CM(1:4) includingh taking down existing stone slab complete all as specified and directed.
10
-
-
... More
Taking up or down steel tubing 15mm bore and connections including removal to store complete all as specified & directed.
150
-
-
... More
All as per item 43 above but 20 mm bore pipe complete all as specified and as directed.
100
-
-
... More
S&F Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified and directed.
3
-
-
... More
S&F for steel water tubes, 20mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed.
100
-
-
... More
Supplying and laying of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling, 15/16 mm dia with all fittings, complete all as specified & directed.
150
-
-
... More
M&L for cutting chases, pinning in stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making good complete all as specified and directed.
150
-
-
... More
S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
3
-
-
... More
S & F in repairs PVC connection 45 cm long 15 mm bore with 2 Nos PTMT check nuts complete all as specified and directed.
96
-
-
... More
Supply and fix in repairs for vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and directed.
24
-
-
... More
S&F in repairs vitreous china wash hand basin counter type, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, CP brass waste coupling 32mm dia etc, including 15mm bore CP fancy type tall boy /swan neck pillar tap all as specified and directed.
24
-
-
... More
S & F stainless steel grating doom 125mm dia complete all as specified and directed.
24
-
-
... More
S&F in repairs Brass CP mixer including connection pipes for mixing hot or cold water screwed down for uPVC/iron pipe and fixed complete complete all as specified and as directed.
24
-
-
... More
S&F in repair 125mm chromium plated shower roses with shower arm with or without swivel joints, any size including fixing to uPVC/Steel pipe complete complete all as specified and as directed.
24
-
-
... More
S&F in repirs 15mm dia bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for uPVC/iron Pipe complete all as specified and directed.
14
-
-
... More
S & F full length Swivel glass mirror with chrome finish and luxury look superior built quality product including framework around glass complete all as specified and as directed
43.2
-
-
... More
S&F in repair fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.
24
-
-
... More
M&L for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete complete all as specified and as directed.
24
-
-
... More
S&F in repairs Chromium Plated Toilet Paper Holder complete all as specified and as directed
24
-
-
... More
S&F in repairs Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and as directed.
24
-
-
... More
S&F 600mmx500mmx150mm (appox size) looking mirror of selected quality glass with PVC cabinet moulded body and frame with hinging door (box type) and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
24
-
-
... More
S&F in repairs Bib taps fancy type long body chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as directed.
24
-
-
... More
S&F in repairs 60 cm long brass CP tubular towel rail 20-mm dia D type including brackets complete all as specified and directed.
24
-
-
... More
M&L for reinforced cement concrete pipe 150mm bore class NP-2 with collars laid and jointed with cement all as specifed and directed .
10
-
-
... More
M&L for concrete bed to drain pipes including haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 150mm dia pipe complete all as specified and directed.
8
-
-
... More
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of size 110mm bore complete all as specified and directed.
50
-
-
... More
S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floor of 75mm bore complete all as specified and directed.
100
-
-
... More
S&F in repair for Stack clamps for bore (any dia) of pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,100mm including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
20
-
-
... More
S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as specified and directed.
10
-
-
... More
S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore complete all as specified and directed.
10
-
-
... More
S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.
5
-
-
... More
S&F PVC (SWR) bends any radius 75 mm bore with trap door complete all as specified and directed.
5
-
-
... More
S & F PVC (SWR) vent cowl 110mm Bore complete all as specified and directed.
8
-
-
... More
S & F PVC (SWR) vent cowl 75mm Bore complete all as specified and directed.
8
-
-
... More
S&F PVC (SWR) gully traps 125/100 setting and jointed in cement solvent complete all as specified and directed.
5
-
-
... More
Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off outside MD land complete all as specified and directed.
110
-
-
... More
M & L rendering 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM (1:6) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. Note:- Water proofing compound shall be measured and paid saperately.
110
-
-
... More
M&L for complete removal of existing paint and applying two coats of oil bound distpemper over a coat of primer on old surfaces of wall including preparation of surfaces complete all as specified and as directed.
2687.61
-
-
... More
M&L for finishing wall with textured interior paint of required shade(appd by Engr-in-Charge/ GE(I) : New work (Two or more coats applied @3.28 ltr/10 Sqm) over and including priming coat of interior primer applied @ 2.20kg/10 Sqm including preparation of surfaces complete all as specified and directed.
525
-
-
... More
M&L for preparation /repairs of plastered or unplastered old decorated surfaces of ceiling etc. incl pillasters and cornices etc. incl brooming down of steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of oil emulsion distemper on plastered or unplastered old decorated surfaces of ceiling complete all as specified and directed.
1237.6
-
-
... More
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance exterior paint of required shed (Company Depot Tinted) with silicon additives @ 1.43 Litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 Lit/sqm over old surfaces including complete removal of existing paint by bio wash, necessary scaffolding required for painting work, safety measures preparation of surfaces etc complete all as specified and directed.
2000
-
-
... More
S&F fixed glass window with 4mm thick tinted glass in two shutter including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge and including taking down old steel windows. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. complete all as specified and as directed.
8
-
-
... More
E/M PORTION
Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for credit and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed.
768
-
-
... More
Taking down main switches and DBs including all fittings or switches of any type and any size complete all as specified and directed.
27
-
-
... More
M&L for point wiring with 1.5 sqmm FRLSH PVC insulated multi stranded copper conductor single core wire/cable in metalic conduit of size 20/25 mm dia concealed in wall or over ceiling/surface (at site requirement), including sutable size of metal flush box any size and respective cover plate all as specified including 1.5 Sqmm FRLSH PVC insulated sheathed solid multi stranded copper conductor cable/wire for continoues earth wire in green colour and connected to earth dolly for ceiling fan point / light point /exhaust fan point / bell point controlled by one switch complete all as specified and directed.
Note:- 1. M&L for cutting chases on walls / ceiling /surface and making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate.
336
-
-
... More
All as per item herein above but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and directed.
240
-
-
... More
All as per item herein above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed.
72
-
-
... More
All as per item herein above but for 3 pin 15 Amps switch socket combination on independent board with 4.0 sq mm copper cable complete all as specified and directed.
120
-
-
... More
M & L for point wiring with 1.5 Sqmm multi stranded copper conductor 1100 V grade, ISI marked, PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in & including PVC conduit of size 20/25 mm dia concealed in wall or over ceiling/surface (or as at site requirement), including sutable size of metal flush box any size and respective cover plate all as specified including 1.5 Sqmm FRLSH PVC insulated sheathed solid multi stranded copper conductor cable/wire for continoues earth wire in green colour and connected to earth dolly for ceiling fan point / light point /exhaust fan point / bell point controlled by one switch complete all as specified and directed.
Note:- 1. M&L for cutting chases on walls / ceiling /surface and making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate.
72
-
-
... More
All as per item herein above but for 3 pin 15 Amps switch socket combination on independent board with 4.0 sq mm copper cable complete all as specified and directed.
48
-
-
... More
S & F Modular switch 1 way 6/10 Amp SP, 1 module complete all as specified and directed.
720
-
-
... More
S & F Modular switch 1 way 16 Amp SP, 1 module complete all as specified and directed.
168
-
-
... More
S & F Modular Fan step regulator, 120W - 2 module complete all as specified and directed.
48
-
-
... More
S & F for ceiling rose surface bakelite 3 phases polycarbonate isolated body complete all as specified and directed.
336
-
-
... More
S&F Modular Socket 6 A 2/3 pin combined, 2 module complete all as specified and directed.
312
-
-
... More
S & F Modular Socket 6 A /16 A-2/3 pin combined 2 module complete all as specified and directed.
120
-
-
... More
S&F in replacement LED Tube light luminaires, 22 watts, lumen output not lessthan 2000 (4 feet), made of anodised extruded aluminium housng, with high transmissivity diffuser, high lumen output, with suitable integrated electronic driver, and operated in single phase, 230 volts, 50HZ, all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of from connector and ceiling rose, complete all as specified and directed.
72
-
-
... More
Supply and fixing in replacement decorative wall light fixture metalic body single head wall light suitable for 20 watt maximun wattage including WW bulb complete all as specified and as directed.
48
-
-
... More
S&F in replacement mirror light batten type 11 W 230V AC, 50Hz, Pf >0.98, THD <10% on wall complete all as specified and directed.
24
-
-
... More
S& F foot light 4 module 5-9 watt with robust designed assembly plates smug fit on the wall dust free glossy finish complete all as specified and as directed.
48
-
-
... More
M&L for sheet metal enclosure MCB DBs VTPN , 4 way 415 V, with 250 A rated copper bus bar, double door, IP 43, including 100 Amp MCCB 25 kA as incomer as per IEC 61439-3, suitable for flush mounting and surface mounting including taking out complete all as specified and as directed.
3
-
-
... More
M&L for sheet metal enclosure MCB DBs SPN, 16 way 240 V, with 100 A rated copper bus bar, double door, IP 43 as per IEC 61439-3, suitable for flush mounting and surface mounting including taking out complete all as specified and directed.
24
-
-
... More
M & L for MCB SP 6-32 Amps, 240 volts , 10 kA ISI marked as per IS/IEC 60898-1 2002 , C -curve, IP 20 including taking out complete all as specified and directed.
288
-
-
... More
M & L for MCB SPN 32/40 Amps, 240 volts , 10 kA ISI marked as per IS/IEC 60898-1 2002 , C -curve, IP 20 including taking out complete all as specified and directed.
48
-
-
... More
Supply and fixing single pole and neutral enclouser with a two pin and earth plug and socket complete with one pole MCB 20 Amps complete all as spd and directed .
24
-
-
... More
Taking down burnt/unserviceable sub main wiring any size complete and making good disturbed surfaces of walls complete all as specified and directed.
515
-
-
... More
M & L for sub main wiring with two single core FRLSH, PVC insulated unsheathed, 1100 Volts grade, copper cable 10 sqmm stranded conductor and drawing through PVC conduit (MMS ISI marked) of suitable size with accessories including continus earth wire FRLSH, PVC insulated unsheathed 1100 volts grade, cable 10 sqmm copper conductor and connected to common earth dolly complete all as specified and directed.
Note : One run of conduit, two runs of cable and one run of earth wire shall be measured and paid as one unit.
375
-
-
... More
M & L for sub main wiring with two single core FRLSH, PVC insulated unsheathed, 1100 Volts grade, copper cable 6 sqmm stranded conductor and drawing through PVC conduit (MMS ISI marked) of suitable size with accessories including continus earth wire FRLSH, PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete all as specified and directed.
Note : One run of conduit, two runs of cable and one run of earth wire shall be measured and paid as one unit.
140
-
-
... More
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below ground level) with top edge of the earth plate not less than 1.5 metre below ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part I connected to earth test point all as specified including excavation and connected earth work, in soft/loose soil, removing soil upto 50m, PCC 1:3:6 type C1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick RCC 1:2:4 type B1 cover slab of earth pit reinforced with 8 mm dia TMT Bars @ 10cm C/C both ways and with handle made out of 12mm dia bars, funnel, strainer, alternate layer of charcoal dust and common salt and testing on completion, complete all as specified and directed.
6
-
-
... More
S&F Rigid non mettalic PVC conduit exclusive of boxes (junction/terminal) inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers lock nuts saddles, pipe hooks etc dia 20 mm complete all as specified and directed.
360
-
-
... More
S&F Metal flush box 1/2 module complete all as specified and directed.
96
-
-
... More
Supply and fix TV socket 1 module complete all as specified and directed.
48
-
-
... More
Supply and fix Tele socket 1 module complete all as specified and directed.
48
-
-
... More
Supply and fix inner and outer modular cover plate of 1/2 M complete all as specified and directed.
96
-
-
... More
Excavation in trenches not exc. 1.50 Mtr wide and not exc. 1.50 m deep and getting out in soft/loose soil for laying of pipe line and like complete all as specified and directed
32
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed
28
-
-
... More
Removing excavated material to a distance n.exc 50 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed
4
-
-
... More
Supply and fixing / laying of GI pipe medium grade 80 mm dia including all fittings such as bend, tee, elbow, union, reducer, tee reducer etc laid or fixing/clamping on floor /surface/air/ wall complete all as specified and directed. (Branch Connection from 80 mm DI to Prop Building)
110
-
-
... More
Material and labour for CI/DI fittings such as Bends, Tapers, Tees, Branch (Single or double branch), connecting pieces etc., any type and angle/ radius etc., confirming to IS 9523-2000 for DI Pipe upto 200 mm bore complete all as specified and as directed
18
-
-
... More
Supply and fixing / laying of GI pipe medium grade 50 mm dia including all fittings such as bend, tee, elbow, union, reducer, tee reducer etc laid or fixing/ clamping on floor /surface/air/ wall complete all as specified and directed. (Branch Connection from 80 mm DI to Prop Building)
135
-
-
... More
Supply and fixing / laying of GI pipe medium grade 25 mm dia including all fittings such as bend, tee, elbow, union, reducer, tee reducer etc laid or fixing/clamping on floor /surface/ air/ wall complete all as specified and directed. (Branch Connection from 50 mm GI to Prop Building OHT)
75
-
-
... More
Material and labour for fixing GM globe/gate valve 50 mm bore with iron wheel head, screwed both ends for iron pipes, ISI marked, complete all as specified and directed. Note: Union or long screw have to provided before fixing of gate valve if required.
2
-
-
... More
Material and labour for fixing GM globe/gate valve 25 mm bore with iron wheel head, screwed both ends for iron pipes, ISI marked, conf to IS complete all as specified and directed.
Note: Union or long screw have to provided before fixing of gate valve
6
-
-
... More
Supply and fix cast iron sluice valve 80 mm bore with stainless steel spindle and cast iron hand wheel complying with IS : 14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber gasket joints, nuts, bolts & washers of required size & Nos complete including removing of old unserviceable valve complete all as specified and directed
1
-
-
... More
M&L for construction of valve chamber of size1200 x 1200 x1200 mm internal dimensions, 3 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40mm x 40mm x 5 mm thick with lifting hook and locking arrangement complete with necessary earth work 230 mm thick, brick work in CM (1:6), PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces complete all as specified and directed
1
-
-
... More
Labour only for cutting of CI/DI/GI pipe 50 to150 mm dia carefully in position for repairs or inserting fittings such as bend, tee, socket pieces, collar etc; complete all as specified and as directed.
1
-
-
... More
Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sqmm 3.5 core for laying in trenches and poles /walls complete all as specified and directed.
320
-
-
... More
Supply & fixing DWC Pipe heavy duty minimum 40/50 mm dia of required length for protection of cables complete including necessary MS clamps, nuts, bolts fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
325
-
-
... More
Supply & fixing GI Pipe light grade 40 mm dia, ISI marked, of required length for protection of cables complete including necessary MS clamps, nuts, bolts and washers etc fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
15
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%