Mazagon Dock Shipbuilders Limited Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Mazagon Dock Shipbuilders Limited - MDL Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date6 Feb 2023
Closing Date27 Feb 2023
Tender AmountRefer Documents
Costs
EMD
₹ 4,20,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Biennial Rate Contract For Civil Work In Residential Area Mumbai As Well As
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MDL_92180_1Bid Award Id
ViewTender No
6000001548Tender Authority
Mazagon Dock Shipbuilders Limited ViewPurchaser Address
-Website
http://https://mazagondock.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BIENNIAL RATE CONTRACT FOR CIVIL WORK IN RESIDENTIAL AREA MUMBAI AS WELL AS MDL OFFICE and ASSOCIATED AREA
BOQ Items
... More
Providing new & Replacing Nahni traps : Providing new & Replacing the existing broken and unserviceable Nahni traps with water proof joints including testing; all complete as directed. PVC Nhani trap 100 mm dia.
20
-
-
... More
Supplying and fixing the following items of approved make with water proof joints including removal of old and making the wall good and depositing the same as directed 15 mm pvc inlet pipe connector.(600 mm approx.)
130
-
-
... More
Supplying and fixing the following items of approved make with water proof joints including removal of old and making the wall good and depositing the same as directed 32/40 mm CP Bottle Trap (Gem or equivalent make)
5
-
-
... More
Supplying and fixing the following items of approved make with water proof joints including removal of old and making the wall good and depositing the same as directed 32/40 mm dia pvc pipe for wash basin & flush tank outlet for EWC including fittings etc
150
-
-
... More
Supplying and fixing the following items of approved make with water proof joints including removal of old and making the wall good and depositing the same as directed 32 mm PVC outlet flexible pipe (750 mm length)
250
-
-
... More
Supplying and fixing the following items of approved make with water proof joints including removal of old and making the wall good and depositing the same as directed CP Bent pipe (15 mm dia. for gyser inlet and outlet)
50
-
-
... More
Providing and fixing drainage pipe fittings specials 'Y' like bend with access door including rubber washer and bolts, plain bend, collar, junction, terminal guards etc. including joint with cement/lead caulking and dismantling the old and damaged one if any 100 mm dia C.I Soil fitting.
5
-
-
... More
Providing and fixing drainage pipe fittings specials 'Y' like bend with access door including rubber washer and bolts, plain bend, collar, junction, terminal guards etc. including joint with cement/lead caulking and dismantling the old and damaged one if any 75 mm dia C.I Soil fitting.
5
-
-
... More
Providing and fixing drainage pipe fittings specials 'Y' like bend with access door including rubber washer and bolts, plain bend, collar, junction, terminal guards etc. including joint with cement/lead caulking and dismantling the old and damaged one if any 100 mm dia PVC fitting.
70
-
-
... More
Providing and fixing drainage pipe fittings specials 'Y' like bend with access door including rubber washer and bolts, plain bend, collar, junction, terminal guards etc. including joint with cement/lead caulking and dismantling the old and damaged one if any 75 mm dia PVC filling.
50
-
-
... More
Providing and fixing darinage waste and vent pipes of approved make including dismantling the old and damaged one if any and depositing the same as directed with proper Clamping/grouting/opening in wall and making wall good etc;complete. 100 mm dia. Sand C.I soil waste pipe.
5
-
-
... More
Providing and fixing darinage waste and vent pipes of approved make including dismantling the old and damaged one if any and depositing the same as directed with proper Clamping/grouting/opening in wall and making wall good etc;complete. 75 mm dia. Sand C.I soil waste pipe.
5
-
-
... More
Providing and fixing darinage waste and vent pipes of approved make including dismantling the old and damaged one if any and depositing the same as directed with proper Clamping/grouting/opening in wall and making wall good etc;complete. 100 mm dia. pvc pipe.
60
-
-
... More
Providing and fixing darinage waste and vent pipes of approved make including dismantling the old and damaged one if any and depositing the same as directed with proper Clamping/grouting/opening in wall and making wall good etc;complete. 75 mm dia. pvc pipe.
25
-
-
... More
Removing chokage of water closet & sewage lines including cleaning of gulley traps etc..
100
-
-
... More
Removing chokage of Urinal and waste trap, wash basins & sinks including cleaning of gulley traps etc complete
270
-
-
... More
Removing chokage of rain water pipe including opening, cleaning and refitting of pipe; complete.
5
-
-
... More
Providing and fixing M.S./GI clamps with iron nail for pipe and fitting at all levels including removing the old and damaged one if any and depositing the same as directed. 150mm /100mm / 75 mm dia. Pipe
10
-
-
... More
Providing and fixing cocks of approved brand and quality including dismantling the old and damaged one if any and depositing the same as directed.Brass bib cock 15 mm nominal bore
5
-
-
... More
Providing and fixing cocks of approved brand and quality including dismantling the old and damaged one if any and depositing the same as directed. CP brass bib cock 15 mm nominal bore
50
-
-
... More
Providing and fixing cocks of approved brand and quality including dismantling the old and damaged one if any and depositing the same as directed. Brass stop cock 20 mm nominal bore
1
-
-
... More
Providing and fixing cocks of approved brand and quality including dismantling the old and damaged one if any and depositing the same as directed. Brass stop cock 25 mm nominal bore
5
-
-
... More
Providing and fixing cocks of approved brand and quality including dismantling the old and damaged one if any and depositing the same as directed. CP stop cock 15 mm nominal bore
40
-
-
... More
Providing and fixing cocks of approved brand and quality including dismantling the old and damaged one if any and depositing the same as directed.CP Pillar cock 15 mm nominal bore
5
-
-
... More
Providing and fixing of Fancy Brass items mentioned below of approved quality including dismantling the old and damaged One, if any, and depositing the same as directed.CP Pillar cock 15 mm nominal bore
50
-
-
... More
Providing and fixing of Fancy Brass items mentioned below of approved quality including dismantling the old and damaged One, if any, and depositing the same as directed. CP Stop cock 15 mm nominal bore (open)
100
-
-
... More
Providing and fixing of Fancy Brass items mentioned below of approved quality including dismantling the old and damaged One, if any, and depositing the same as directed. CP Stop cock 15 mm nominal bore (concealed)
20
-
-
... More
Providing and fixing of Fancy Brass items mentioned below of approved quality including dismantling the old and damaged One, if any, and depositing the same as directed. CP bib cock 15 mm nominal bore
100
-
-
... More
Providing and fixing 32 mm to 40 mm CP brass waste coupling for wash basins,sink, etc. Including removal of old and damaged one if any, and depositing the same as directed.
60
-
-
... More
Providing and fixing above 40mm CP brass waste coupling for wash basins,sink, etc. Including removal of old and damaged one if any, and depositing the same as directed.
5
-
-
... More
Providing and fixing ball valve (brass) with lever arm of approved quality complete including dismantling the old and damaged one if any and depositing the same as directed. High level or low level with plastic floats. 15 mm nominal bore
30
-
-
... More
Providing and fixing only PVC/copper floats of approved quality including dismantling the old and damaged one if any and depositing the same as directed. Plasting floats 15 mm nominal bore
1
-
-
... More
Labour charges for removing and refixing or fixing water heaters/Aquagaurd including dismantling and making connections complete. Instant geysers/Aquagaurd of user or MDL supplied
80
-
-
... More
Removing and refixing of water purifier including dismantalling and making connections complete. Water Purifier
50
-
-
... More
Removing and refixing of existing shower rose with 15 or 20 mm inlet including dismantling and making leakage rectification if any all complete as directed. 100 mm dia. CP brass
5
-
-
... More
Removing and refixing of existing shower rose with 15 or 20 mm inlet including dismantling and making leakage rectification if any all complete as directed. 75 mm dia. CP brass
10
-
-
... More
Providing and fixing CP revolving type shower rose with 15 or 20 mm inlet including dismantling the old and damaged one if any and depositing the same a directed. a) 100 mm dia.
60
-
-
... More
Providing and fixing CP revolving type shower rosse with 15 or 20 mm inlet including dismantling the old and damaged one if any and depositing the same a directed. b) 75 mm dia.
10
-
-
... More
Repairing leakages in taps/over flows etc. by supplying and replacing washers of pillar cocks, stop cocks, bibcocks, float valves etc. of wash basins, flushing tanks and freshwater systems.( Rate per leakage rectified.) 15 to 25 mm dia GI/PVC pipeline
100
-
-
... More
Repairs to leaks of inlet/outlet line of wash basins, sinks, flush tanks, showers, etc. by tightening with water seal compound, white lead, teflon or by brazing the joints etc;complete..
150
-
-
... More
Providing & fixing of concealed GI Pipes including fittings, in floor, ceiling or wall including exposing the pipes and making good the damaged floor/ceiling/ wall excluding tile works including coal tar paining and wrapping with jute cloth, bitumen paper. All materials supplied by contractor (Pipes should be 'C' grade) 20 mm nominal bore
5
-
-
... More
Providing & fixing of concealed GI Pipes including fittings, in floor, ceiling or wall including exposing the pipes and making good the damaged floor/ceiling/ wall excluding tile works including coal tar paining and wrapping with jute cloth, bitumen paper. All materials supplied by contractor (Pipes should be 'C' grade) 15 mm nominal bore
5
-
-
... More
Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 100 mm nominal bore
1
-
-
... More
Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 75 mm nominal bore
20
-
-
... More
Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 65 mm nominal bore
5
-
-
... More
Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 50 mm nominal bore
50
-
-
... More
Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 40 mm nominal bore
50
-
-
... More
Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 32 mm nominal bore
50
-
-
... More
Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 25 mm nominal bore
50
-
-
... More
Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 20 mm nominal bore
50
-
-
... More
Providing & fixing exposed new GI pipes including fittings, G.I clamps including removing the old and damaged pipe if any and depositing the same as directed. (Pipes should be 'C' grade) 15 mm nominal bore
50
-
-
... More
Removing and refixing the existing exposed GI pipe lines for water supply including G.I clamps and making good the damaged surfaces including cutting, threading etc; complete. 15 mm to 25 mm
100
-
-
... More
Removing the existing exposed GI pipe lines for water supply including G.I clamps and making good the damaged surfaces including cutting, threading etc; complete. Removing 15 mm to 25 mm dia pipe only.
300
-
-
... More
Supplying and fixing GI assorted fittings like tees, elbows, sockets, reducers, jamnuts, bends short pieces, plugs, including G.I clamp, union etc. of approved quality including dismantling the old and damaged one if any and depositing the same as directed 40 mm
50
-
-
... More
Supplying and fixing GI assorted fittings like tees, elbows, sockets, reducers, jamnuts, bends short pieces, plugs, including G.I clamp, union etc. of approved quality including dismantling the old and damaged one if any and depositing the same as directe 32 mm
50
-
-
... More
Supplying and fixing GI assorted fittings like tees, elbows, sockets, reducers, jamnuts, bends short pieces, plugs, including G.I clamp, union etc. of approved quality including dismantling the old and damaged one if any and depositing the same as directe 25 mm
5
-
-
... More
Supplying and fixing GI assorted fittings like tees, elbows, sockets, reducers, jamnuts, bends short pieces, plugs, including G.I clamp, union etc. of approved quality including dismantling the old and damaged one if any and depositing the same as directe 20 mm
75
-
-
... More
Supplying and fixing GI assorted fittings like tees, elbows, sockets, reducers, jamnuts, bends short pieces, plugs, including G.I clamp, union etc. of approved quality including dismantling the old and damaged one if any and depositing the same as directe 15 mm
300
-
-
... More
Removing chokage in pipes including opening, cleaning the pipe and refitting complete with all operations; all complete. 15 mm to 40 mm nominal bore.
250
-
-
... More
Supplying & Fixing spindle to replace damaged one for bib cock/stop cock/pillar cock wheel valves etc;
complete. 15 mm to 25 mm dia.
150
-
-
... More
Concealing the existing GI pipes with fittings with two coats coltar - paint gunny bag wrapping etc.including chasing in wall and making good the same. 40 mm to 50 mm
50
-
-
... More
Providing and fixing brass full way valve with wheel of approved quality including dismantling the old and damaged one if any and depositing the same as directed. 75 mm nominal bore
25
-
-
... More
Providing and fixing brass full way valve with wheel of approved quality including dismantling the old and damaged one if any and depositing the same as directed. 50 mm nominal bore
15
-
-
... More
Providing and fixing brass full way valve with wheel of approved quality including dismantling the old and damaged one if any and depositing the same as directed. 40 mm nominal bore
25
-
-
... More
Providing and fixing brass full way valve with wheel of approved quality including dismantling the old and damaged one if any and depositing the same as directed. 25 mm nominal bore
25
-
-
... More
Providing and fixing brass full way valve with wheel of approved quality including dismantling the old and damaged one if any and depositing the same as directed. 20 mm nominal bore
25
-
-
... More
Providing and fixing brass full way valve with wheel of approved quality including dismantling the old and damaged one if any and depositing the same as directed. 15 mm nominal bore
25
-
-
... More
Labour charges for fixing of Bathrooms fancy items like Soap dish, towel fords, stop cock, pillar cock, angle cock, shower, mixer etc; complete (Bathroom fittings will be supplied by MDL)
200
-
-
... More
Rectifying leakage in GI Water supply pipe and making good the lints water tight including dismantling, cutting, threading and refixing wherever necessary; all complete. 25 mm to 40 mm dia pipe.
20
-
-
... More
Flooding W.C /bath area with water by pluging traps/PAN etc with cement morter to check leakages and removing and cleaning the above after leak test etc.
25
-
-
... More
Providing & laying water proofing treatment to the toilet flooring/roof terrace etc including removing existing and smooth plaster in C.M.(1:3) over a layer of cement slurry and one coat of polycoat sodium silicate in flooring including necessary brick bat coba in C.M.(1:3); all complete.
160
-
-
... More
Providing and sealing with Polysulphide sealant in joint of size 25mm x 25mm so as to make the joint completely water tight etc. complete as directed.
10
-
-
... More
Providing and laying 6" dia stoneware glazed pipe ("A" Grade) for Sewer lines after removing the existing damaged line including excavation and refilling and making the joints leak free; all complete as directed.
10
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Exposed on wall 15 mm nominal outer dia Pipes
30
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Exposed on wall 20 mm nominal outer dia Pipes
500
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Exposed on wall 25 mm nominal outer dia Pipes
100
-
-
... More
Providing and placing on terrace/ loft (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with existing fittings and the base support for tank.
1000
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes
10
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes
100
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes
50
-
-
... More
Providing and placing on terrace/ loft (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with existing fittings and the base support for tank.
10000
-
-
... More
Flooring
-
-
-
... More
Dismantling carefully tile work laid in cement mortar & carting away the same outside MDL to Municipal dumping yard and making complete.For tile thickness upto 25mm
1000
-
-
... More
Dismantling carefully tile work laid in cement mortar & carting away the same outside MDL to Municipal dumping yard and making complete.For tile thickness above 25mm
500
-
-
... More
Providing and fixing 1st quality ceramic glazed tiles conforming to IS 15622 ( thickness to be specified by the manufacure ) of approved make like RAK, KAJARIA, NITCO in all colours, shades of any size as approved (except burgundy, bottle green, black) in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) and jointing with grey cement slurry @ 3.3 kg per Sq.m including pointing in white cement mixed with pigment of matching shade and making complete.
400
-
-
... More
Providing and laying Ceramic glazed floor tiles 300*300 mm ( thickness to be specified by the manufacure ) of 1st quality conforming to IS 15622 of approved make (RAK, KAJARIA, NITCO, Bells) in approved Colour / shade like white, ivory, grey, fume red brown etc laid on 20mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) including pointing the joints with white cement and matching pigment etc. and making complete as directed.
100
-
-
... More
Providing & laying polished finished vitrified floor in different sizes (thickness to be specified by the manufacturer) with (RAK, KAJARIA, NITCO, Bells) water absorption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement morter 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. and making complete. -Size of Tiles 60cm X 60 cm
800
-
-
... More
Fixing glazed / Ceramic / Vitrified floor tiles with cement based high polymer modified quick-set tiles adhesive (water based) conforming to IS: 15477, using 5kg Adhesive per Sq.m of tiles area, in average 3mm thickness
100
-
-
... More
Providing and Fixing Granite of 18mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms, vanity counters, window sills, facias and similar location of required size of approved shade, colour and texture laid over 20mm thick base cement morter 1:4 (1 cement : 4 coarse sand )with joints treated with white cement, mixed with matching pigments, epoxy touch ups, including rubbing,curing, moulding and polished to edge to give high gloss finish etc. and making complete at all levels as directed by Executive-In-Charge.Granite of any colour and shade Area of slab up to 0.5 Sq.m
100
-
-
... More
Providing and Fixing Granite of 18mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms, vanity counters, window sills, facias and similar location of required size of approved shade, colour and texture laid over 20mm thick base cement morter 1:4 (1 cement : 4 coarse sand ) with joints treated with white cement, mixed with matching pigments, epoxy touch ups, including rubbing, curing, moulding and polished to edge to give high gloss finish etc. and making complete at all levels as directed by Executive-In-Charge.-Granite of any colour and shade --Area of slab over 0.5 Sq.m (Basic rate of material = Rs 3000)
50
-
-
... More
Providing and fixing kadappa stone slab of 30-40mm thick for platform of required size in 1:4 cement mortar including providing & fixing border patti on front edge, filling joints with white cement mixed with matching pigment, curing, ceaning etc. and making complete as directed.
100
-
-
... More
Polishing Mosaic/Marble flooring by mechanical means in Three coats after suitable joint filling including supply of all materials, polishing machine to an approved finish Including waxing etc; and making complete.
10
-
-
... More
Polishing mosaic skirting/marble skirting etc.by hand polishing including supply of all materials, labour etc., to an approved finish
50
-
-
... More
Providing, laying and fixing polished stone slabs of good quality in 1:4 cement mortar for flooring, etc. in sizes as directed by MDL including dismantling the old damaged if any, cutting to size & polishing wherever necessary (thickness not less than 18mm) Marble
10
-
-
... More
Providing laying and fixing polished Mandana stone slabs of good quality in 1:4 cement mortar for flooring, etc. in sizes as directed by MDL including dismantling the old damaged if any, cutting to size & polishing wherever necessary (thickness not less then 16m )
30
-
-
... More
Providing laying and fixing polished Marble stone slabs of good quality in 1:4 cement mortar for flooring, etc. in sizes as directed by MDL including dismantling the old damaged if any, cutting to size & polishing wherever necessary (thickness not less then 18mm )
30
-
-
... More
Providing and fixing polished Marble stone for sills/soft/frame approx. 50 mm to 100 mm wide in cemtn mortar for doors and windows frames including the dismantling the old and decayed/damaged frame and making wall good with plaster to fit and match the doors. Marble Stone (20mm thickness)
10
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including removing the existing old tiles and dumping the debris to municipal dumping ground complete:
100
-
-
... More
Applying white cement with water proof compound to the existing leaking tiles joints (after cleaning joints.) With materials supplied by contractor.
100
-
-
... More
Deduct for not using 20mm thick cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) bedding in laying of floor tiles & 3.3 Kg/Sqm
300
-
-
... More
Providing and fixing 1.5 mm thick polyvinyl Chloride flooring including leveling the base with white cement including pasting with appropriate material , cleaning the surface etc complete.
800
-
-
... More
Excavation
-
-
-
... More
Excavation in earth including soft rock such as murrum up to 1:5 Meter depth and refilling the same after laying/replacing or removing pipes and disposal of the debris/surplus earth.
10
-
-
... More
Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.
5
-
-
... More
Uprooting of shrubs and girth grown on external wall of the building/drain lines etc. with acid treatment including scaffolding or zhoola, if any , and making wall good; all complete.
5
-
-
... More
Deduct for disposed soil not levelled and neatly dressed.
5
-
-
... More
PCC/RCC
-
-
-
... More
Grouting of MS flat bar (Size 28" x 36") with studs in cement mortar for stair case nosing including dismantling the damaged one and smooth finishing of adjacent areas with mortar; all complete as directed (MS Flat bar will be supplied by MDL).
5
-
-
... More
CEMENT CONCRETE (CAST -IN- SITU) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level PCC 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1
-
-
... More
CEMENT CONCRETE (CAST -IN- SITU) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level PCC 1:1.5:3 (1 Cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size)
1
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing : PCC/RCC 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)
1
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing : PCC/RCC 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, beams, posts and struts
10
-
-
... More
Restorative Repair Works
-
-
-
... More
Chipping the RCC surface and cleaning the rusted reinforcement and exposed surface by wire brush mechanical device or any other established method and applying rust removing solution of approved make and quality with cotton waste swab to reinforcement and allowing to dry the same for 24 hours, brushing of loose particle and applying first coat of Rust preventive coating of polymker and cement slurry in 1:1:5 proportion with soft brush without adding water including applying another coat of Rust preventing after 4 hours allowing air curing for 48 hours etc including scaffolding etc complete.
100
-
-
... More
Removing existing corrosion in MS/ torsteel bars by means of suitable light tapping wire brushing and applying rusticide rust converter of "Feovert" of Krishna conchem or equivalent approved make etc complete
50
-
-
... More
Providing and applying two coats of Rust preventive coating of IPNET of Krishna Conchem or equivalent approved make after cleaning the existing surface from dust/ loose particles by applying air water under pressure etc complete as directed
50
-
-
... More
Providing and applying Bonding coat between concrete members like RCC slabs, columns, beams, Chajjas, pardis etc and cement mortar plaster using HACK AID PLAST of M/s. Sunanda Speciality Coatings Pvt. Ltd. or equivalent as per the instructions of manufacturer or Engineer Incharge; including cleaning the concrete surface thoroughly to remove dust, dirt, grime, deshuttering oils and rub down to a clean surface at all heights/ levels and locations and as directed by Engineer Incharge
15
-
-
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, for all leads including all lifts involved.
10
-
-
... More
Providing and grouting with cement and water and grouting shall be done using hand grouting cement machine till refusal as directed, curing the area by water spray etc. complete as directed.
50
-
-
... More
Breaking of brick wall to make opening for installation of following equipments/items and making wall good by plaster etc as directed: Air Conditioner Unit./Exhaust Fan/Door or Window Frame etc: all complete.
10
-
-
... More
Exposing existing old and worn out RCC column, beams and slabs etc upto main reinforcement carefully by means of chisel and hammer including necessary scaffolding including carting away the material outside MDL premises to the municipal dumping ground etc complete as directed. (Surface area exposed after final chipping chiseling etc will only be measured and paid for)
1000
-
-
... More
Providing and applying POLYMER MODIFIED MORTAR(PMM) in proportion of 1(Polymer) : 5(Cement) : 15 (Quartz sand) by weight with water cement ratio of 0.35 including application of bond coat of Krishna Conchem or equivalent approved make using brush in ratio of 1 (Polymer) :1 (Cement) : 0.35 (water) by weight including cleaning of surface with air mixed with water under pressure, and subsequent layer upto 10mm after hardening curing; all complete.(Polymer manufactured by sunanda, pidilite, fosroc, acro- chem, build core or equivalent)
65000
-
-
... More
Providing and appying Polymer Modified Crack filler of Dr. Fixit/ Sunanda Conchem /Krishna Conchem or equivalent approved make including surface preparation like chiseling the existing cracks to form a V groove, cleaning the groove to remove all loose materials and washing with water before applying the crack filler at any height/location etc all complete as directed.
50
-
-
... More
Providing and applying a priming cum bonding coat of polymer of Krishna Conchem or equivalent approved make and cement slurry in ratio 1:1 by weight to concrete area by brush all complete. (Cement 0.005 Bag / Sq.M)
500
-
-
... More
Removing existing corrosion in MS/ torsteel bars by means of suitable light tapping wire brushing and applying rust removal "Feovert" of Krishna conchem or equivalent approved make etc complete
50
-
-
... More
Providing & laying Polycrete "A" of M/s. Sunanda or equivalent approved make using 12.5% of water by
weight of polycrete mix over a bond coat of approved make in the ratio of 1 polymer: 1cement, curing etc; all complete at any location / Height
1000
-
-
... More
Repairing of existing kerbing using same/old bricks for Gardens, pathways etc., by hacking the existing kerbing up to Brick level and re-plastering it on top and sides with 1:4 cement plaster 20mm thk. To be laid in two layers & disposing off the peeled
25
-
-
... More
Repairing of Rainwater/Sewerage chamber by plastering (1:4) and concrete work on exposed surface; all complete as directed.
15
-
-
... More
Repairing of existing plaster work by hacking the plaster up to a depth of 40 mm (I.e. exposing the brick work) and relaying the plaster in two layers (up to 40 mm) with a mix of 1:4 CM & each layer to be provided with chicken/wire mesh (as directed)
10
-
-
... More
Repairs to plaster in CM(1:4) in patches with neeru finish & curing of required area including cutting the patch in proper shape, widening the visible cracks etc and preparing the Surface of the walls complete including disposal of rubbish and include. Area up to 0.5 sq.mm
100
-
-
... More
Repairs to plaster in CM(1:4) in patches with neeru finish & curing of required area including cutting the patch in proper shape, widening the visible cracks etc and preparing the Surface of the walls complete including disposal of rubbish and include. Area above 0.5 sq.mm
100
-
-
... More
Providing cement slurry injection wherever directed including making a hole in the flooring/wall by grouting a PVC pipes out and injecting cement slurry under a pressure of approx. 3m head or by pump to stop the leakages, removing a PVC pipe spun
5
-
-
... More
Raising of Rainwater/sewerate chamber to match the adjacent surface after dismantling carefully it's cover and frame and refixing the same after cement mortar/cement concrete work etc; all complete.
20
-
-
... More
Removing of door shutter for fixing of tiles including cutting and planning the bottom portion of shutter to flush with floor tiles and refixing the shutter after tile work is over all complete.
25
-
-
... More
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in charge.
10
-
-
... More
Refixing old glass panels with putty and nails
20
-
-
... More
Providing & Grouting Hooks for fan etc in RCC ceiling & making good the surface; all complete as directed.
40
-
-
... More
Boring holes in the wall and making good the same with cement plaster (up to 100mm to 150mm size).
200
-
-
... More
Plugging of Rate holes with Cement Mortar/Cement Concrete and glass pieces.
250
-
-
... More
Waterproofing of the prepared surface using Dr. Fixit Hydroshield PUD Plus (Or Equivalent) as per specification :
1. Prime the surface with Dr. Fixit Primeseal (Or Equivalent) diluted with water in the ratio 2:1
2. Apply 1st coat of Dr. Fixit Hydroshield PUD Plus (Or Equivalent) by brush or roller. Before the coat dries, embedd fibre mesh into the coat and let the coat dry completly
3. Apply 2nd coat of Dr. Fixit Hydroshield PUD Plus (Or Equivalent), perpendicular to 1st coat and let it dry. 4. 3rd coat to be applied as per specification perpendicular to second coat .and let it dry to achieve DFT of 0.8-1.0mm, coverage of approx. 0.6
litre/M2/coat is required. Allow complete drying between coats with a minimum of 3 to 4 hours depending on weather conditions
5. waterproofing warranty of 5 years of warranty in terms of 10% PBG & balance 5 years of warranty in terms of indemmity bond . The work should be carried out by certifified applicator of manufacture.
100
-
-
... More
External Waterproofing Paint Dr. Fixit Raincoat :Providing and applying External Raincoat painting with crack filling Pidilite Company Product Dr.Fixit Rain Coat acrylic polymer based chemical compound coating to the extrnal surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade steiner to give required shade to the surface in two coats.Including providing three coats of priming of Dr.Fixit prime seal polymer base primer including preparing surface scrapping the existing loose old paint , removing loose particles of sand on the surface opening and cleaning the crack developed in the external plaster, removing loose partuicles by chiseling, filling cracks by chemical compound of Dr.fixit crack - X with proper penetration etc. Coating of Raincoat with the help of brush and as per instruction and specification given by pedilite and with instruction from Engineer in charge. Work shall be executed by certified applicator only covering guarantee of 3 years on court stamp paper of Rs 500 /-and necessary testing etc complete.
500
-
-
... More
Waterproofing of all internal surfaces of the tank:
Provide & Apply Dr. Fixit Fastflex (Or Equivalent) on all surfaces as follows:
1. Ensure that surface is in SSD Condition
2. Apply first coat of Dr. Fixit Fastflex with brush or trowel
3. After first coat has completely dried(5 to 6 hours or as per ambient conditions), apply second coat of Dr. Fixit Fastflex and leave to air cure for 7 days .The contractor should submite waterproofing warranty of 5 years of warranty in terms of 10% PBG & balance 5 years of warranty in terms of indemmity bond . The work should be carried out by certifified applicator of manufacture.Contractor should produced the food grade certificate after waterproofing done to the tank.
300
-
-
... More
Water proofing of joint roof floor using Roff Rainbow Tile mate Epoxy (Three Component epoxide resin based ceramic tile joint filler), as follows : 1. Tile Joints to be opened and cleaned to remove any loose particles 2. The 3 components of the Roff Rainbow Tilemate Epoxy shall be mixed in required proportions as per the manufacturers specifications 3. The grout shall then be filled into the opened joints ensuring that they are completely filled. 4. The surplus grout shall be cleaned from the tile joint surface with-in 10-15 minutes, using initially, a rough textures sponge dampened with clean water. 5. Any light residue left shall be cleaned off using a sponge and cleaner. II) Providing and Application of Dr.Fixit New Coat Water Proofing as per manufacturers specifications, as follows: 1. Application of primer, 2 parts of Dr. Fixit Prime Seal mixed with 1 part water, and applied to the surface in 1 coat. This dilution will cover approxately 7sq M. Allow to dry for 6 to 8 hours. 2. First coat of Dr. Fixit New Coat is to be applied undiluted over the primed surface. While the first coat is wet, a fibre mesh is to be embedded into the coat. The fibre mesh improves the performance of the coating, to take care of movement in cracks caused due to variations in temperature etc. Allow 6 to 8 hours to dry, depending on ambient conditions. 3. After the first coat is dry, apply the second coat, and wait for 6 to 8 hours to dry, depending on ambient conditions. 4. After the second coat is dry, apply the third coat and wait for 6 to 8 hours to dry, depending on ambient conditions. 5. After application of the third coat, leave to air cure for 7 days. etc. complete with 5 years guarantee.
200
-
-
... More
Water proofing of Tile Joints on the bathroom floor /wall/ parapet wall: Repairing of joint tiles using Roff Rainbow Tilemate Epoxy (Three Component epoxide resin based ceramic tile joint filler), as follows : 1. Tile Joints to be opened and cleaned to remove any loose particles 2. The 3 components of the Roff Rainbow Tilemate Epoxy shall be mixed in required proportions as per the manufacturers specifications 3. The grout shall then be filled into the opened joints ensuring that they are completely filled. 4. The surplus grout shall be cleaned from the tile joint surface with-in 10-15 minutes, using initially, a rough textures sponge dampened with clean water. 5. Any light residue left shall be cleaned off using a sponge and cleaner. etc. Complete with 5 years guarantee.
400
-
-
... More
Providing waterproofing of water tanks with Dr.Fixit Pidifin2k and Dr.Fixit Safeguard and fixing with Dr.Fixitb waterbase SW2020 (or equivalent BASF/FOSROC/STP) on wall construction joints like slab and wall, lift joints etc during concreting work is on. Mechanically clean the RCC slab and wall with wire brush / coir brush to free from all loose materials like dust, dirt etc. Seal all honeycombs, pin holes, joints with Polymer Modified Moratr attain SSD condition. Apply first coat of Dr.Fixit Pidifin2k or equivalent BASF/FOSROC/STP rapid chloride permiability reduction in chloride ion penetratiopn , is 90% as per ASTM C 1202 : on properly rendered, cleaned RCC slab and wall with brush and allow it to dry for 6-8 hours. After drying of first coat apply second coat and sprinkled course sand on vertical surface. Allow 24 hours for full cure. Apply waterproof screed concrete 30-40 mm on floor and 12-15 mm waterproof plaster on vertical surface before admixed with Dr.Fixit Pidiproof LW+(or equivalent BASF/FOSROC/STP) IS : 2645 : as per standard @ 200 ml per bag of cement.. Cure the surface with water. Clean the surface with wire brush to remove all loose dust , dirt etc. Saturate the surface with water to reach SSD condition. Apply two coats of Dr.Fixit Safeguard (or equivalent BASF/FOSROC/STP) (pot life at 30C, hrs is 60-75, surface drying time at 30Cas per ASTM D-1649 6-8, water absorption ap per ASTM C 870 : 90- NIL, Food grade certification PASSES -Ref-USFDA-175-300, Antifungal activity as per EN 15458-06) by brush on SSD floor and wall by brush on an interval of 6-8 hours ijn between two coats. Allow the surface for full cure of 24 hours before use. Work shall be executed by certified applicator only and shall be guaranteed for 5 years on Rs 500 /- stamp paper.
500
-
-
... More
Providing leak proof treatment by injection grouting wherever directed including making a hole in the flooring/wall, grouting a PVC pipespout and injecting cement slurry mixed with water proofing compound of approved make, under a pressure of approx. 3m head, removing a PVC pipe spout and sealing the same, making good the same;all complete as directed.(Cement 0.30 bags per injection)
10
-
-
... More
Brick work & plaster
-
-
-
... More
FULL BRICK MASONRY WORK upto 2nd floor - 1(a)Providing full brick masonry work in cement mortar 1:5 (1 cement : 5 fine sand) with locally available best quality standard brick & sand including curing etc; for wall and drain chambers all complete. Up to 2nd floor level.
5
-
-
... More
FULL BRICK MASONRY WORK above 2nd floor- 1(b) Providing full brick masonry work in cement mortar 1:5 (1 cement : 5 fine sand) with locally available best quality standard brick & sand including curing etc; for wall and drain chambers all complete. At all other levels above 2nd floor.
2
-
-
... More
HALF BRICK MASONRY WORK upto 2nd floor - Providing half brick masonry in cement mortar1:5 (1 cement:5 coarse sand) with locally available best quality standard bricks & sand including curing; for wall, drain chambers etc all complete. Up to 2nd floor level.
0.1
-
-
... More
HALF BRICK MASONRY WORK above 2nd floor - Providing half brick masonry in cement mortar1:5 (1 cement:5 coarse sand) with locally available best quality standard bricks & sand including curing; for wall, drain chambers etc all complete.At all other levels above 2nd floor.
0.1
-
-
... More
Providing and plastering on new RCC/brick masonry work with smooth Neeru finishing if any on the exposed surface with 12 mm thick cement mortar (1:4) including curing etc; for wall and chambers; all complete as directed.
50
-
-
... More
Coursed rubble masonry with hard stone (first sort) in superstructure above plinth level and upto floor five level, in cement mortar 1:6 (1 cement: 6 coarse sand)
1
-
-
... More
Providing and applying minimum 20mm thick waterproof sand faced cement plaster (1:4) for external damaged plaster for wall, parapet, vatas etc with standard waterproofing material as per manufacturer specification including breaking the damaged plaster, curing, complete as directed.
100
-
-
... More
Providing and applying neeru on plaster surfaces to match with existing surface; including properly scrapping the surface to remove loose plaster etc; all complete.
1
-
-
... More
Providing & fixing the Safety Net with 12mm Border rope, 4mm knotted, 1mm fishnet size -15mm X 15mm mesh to prevent the debris falling on ground /walkway etc. as per the direction of Engineer Incharge. Note : The cost includes the work to be carried out upto Ten story height/40m. No additional payment will be made for floor rise for entire work.
300
-
-
... More
Covering the scafolding with Bardan (Agro Knitted Fabric) by sewing, knotting as required at any height of the building /structure while carying out external repair work of the building/structure etc. as per the direction of Engineer Incharge. Note : The cost includes the work to be carried out upto Ten story height/40m. No additional payment will be made for floor rise for entire work.
500
-
-
... More
Providing and fixing Siporex concrete block masonry as per thickness required with 1:4 cement sand mortar including curing etc. complete as directed.
5
-
-
... More
Dismantling precast concrete/RCC Concrete or stone slabs in walls, partition walls, RCC Jali etc. for any thickness including stacking within 50 metres lead. Note : The cost includes the work to be carried out upto Ten story height/40m. No additional payment will be made for floor rise for entire work.
10
-
-
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.
500
-
-
... More
Aluminium/partition & wood work
-
-
-
... More
Removing and Refixing door or window frame with holdfast properly c.c. grouted in wall; complete
50
-
-
... More
Providing & Fixing Fly / Mosquito proof Stainless Steel wire mesh grade 304 to anodised aluminium frames / shutters with necessary fixtures, fittings etc complete
70
-
-
... More
Providing and fixing glazing in wooden/aluminium door, window, ventilator shutters and partitions etc with PVC/ neoprene gasket etc complete as per the architectural drawings and the directions of engineer in charge (Cost of aluminium snap beading shall be paid in basic item ) Make of glass Saint Gobin, ASAI, Modi Float or equivalent -With float glass panes of 5.5mm thickness (weight not less than 13.75 kg/ sqm)
25
-
-
... More
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
20
-
-
... More
Providing and fixing panelled Second class teak wood 35 mm thick shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of size 125x65x2.12 mm with necessary screws, including panelling, removing old shutter all complete as per direction of Engineer-in-charge.
3
-
-
... More
Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extrudedbidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of thelock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge including ISI marked M.S. pressed butt hinges bright finished of size 125x65x2.12 mm with necessary screws, removing old shutter, complete.
25
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper
10
-
-
... More
Providing and fixing copper oxidised mild steel MS safety chain with necessary fixtures for doors (weighing not less than 450 gms)
30
-
-
... More
Providing and fixing ISI marked Anodised Aluminium Fittings (anodic coating not less than AC 10 as per IS 1868 transparent or dyed to required colour or shade )
-
-
-
... More
Sliding door bolts of size 250 x 16mm with nuts and screws complete
50
-
-
... More
Tower bolts of size 200 x 10mm with nuts and screws complete
40
-
-
... More
Pull bolt lock with nuts and screws complete
4
-
-
... More
kicking plate 50 cm long and 100 x 3.15 mm size with necessary screws complete
5
-
-
... More
Handles of 125mm with necessary screws complete
40
-
-
... More
Hanging floor door stopper with single rubber stopper with necessary screws complete
30
-
-
... More
Hanging floor door stopper with Twin rubber stopper with necessary screws complete
30
-
-
... More
Providing and fixing 600 x 120 x 5mm glass shelf with edges round of supported on anodised aluminium angle frame with CP brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc complete
30
-
-
... More
Chromium plated brass fittings :-
-
-
-
... More
Providing and fixing chromium plated brass 100mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc complete of approved make and quality.
30
-
-
... More
Providing and fixing chromium plated brass Night latch with necessary screws etc complete of approved make and quality.
20
-
-
... More
Providing and fixing chromium plated brass cupboard locks of size 75mm with six levers with necessary screws etc complete of approved make and quality.
30
-
-
... More
Providing and fixing chromium plated brass cupboard knob / wardrobe knob of size 50mm with nuts etc complete of approved make and quality.
30
-
-
... More
Providing and fixing chromium plated brass handles of 125mm with necessary screws etc complete of approved make and quality.
30
-
-
... More
Copper oxidised mild steel fittings :-
-
-
-
... More
Providing and fixing copper oxidised mild steel Sliding door bolts with nuts and necessary screws etc complete--250*16mm
20
-
-
... More
Providing and fixing copper oxidised mild steel MS tower bolt black finish (barrel type) - 200 * 10mm with necessary screws etc complete
20
-
-
... More
Providing and fixing copper oxidised mild steel 85mm * 42mm pull bolt lock conforming to IS 7534 with necessary screws, bolts, nut and washers etc complete
10
-
-
... More
Providing and fixing copper oxidised mild steel MS handles of size 125mm conforming to IS 4992 including necessary screws etc complete
10
-
-
... More
Providing and fixing copper oxidised mild steel Hasp and staple (safety type) of size 115mm conforming to IS 363 with necessary screws etc complete
10
-
-
... More
Providing and fixing copper oxidised mild steel MS safety chain with necessary fixtures for doors (weighing not less than 450 gms)
10
-
-
... More
New glass panels, with putty and nails wherever necessary including racking out the old putty Float glass panes of thickness 4 mm
10
-
-
... More
Providing and fixing stainless steel curtain rods of 1.25 mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm diameter
60
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
450
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron)
100
-
-
... More
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays 205 X 19 mm of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer in-charge complete.
5
-
-
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar
10
-
-
... More
Providing & fixing IInd class Teak Wood in window /doors frames / shutters as per existing section in place of decayed portion and fixed in position by joining with the existing etc. complete as directed.
1
-
-
... More
Providing and fixing IS 3564 marked aluminium extruded section body tubular type urivesal hydraulic door closer of Hardwyn made (Eddy) or equivalent, with double speed adjustment with necessary accessories and screws etc complete
10
-
-
... More
Providing and fixing aluminium louvered windows consisting of vertical arm (40 x 12mm) with holders, lever and locking arrangement weighing at 0.91 kg/m with 3mm thick sheet glass louvers including filling the gap in joints of cladding and external/internal adjoining portion with plaster silicon jelly with gun etc and making complete
50
-
-
... More
Removing of aluminium window and refixing the same with all necessary materials. Area Upto - 2 Sq.m
40
-
-
... More
Removing of aluminium window and refixing the same with all necessary materials. Area above 2 Sq.M and Upto - 5 Sq.m
20
-
-
... More
Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285, Anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,. Aluminium snap beading for glazing/ panelling, CP brass/ stainless steel screws, and making all complete as per drawings and the directions of Executive in Charge (Glazing and panelling to be paid for separately). -For fixed Portion
500
-
-
... More
Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285, Anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,. Aluminium snap beading for glazing/ panelling, CP brass/ stainless steel screws, and making all complete as per drawings and the directions of Executive in Charge (Glazing and panelling to be paid for separately) -For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots/ handles/rollers
and making provision for fixing of fittings wherever required etc and making complete.
500
-
-
... More
Providing and fixing glazing in wooden/aluminium door, window, ventilator shutters and partitions etc with PVC/ neoprene gasket etc and making complete as per the architectural drawings and the directions of executive in charge (Cost of aluminium snap beading shall be paid in basic item ) Make of glass Saint Gobin, ASAI, Modi Float or equivalent -With float glass panes of 4.0mm thickness (weight not less than 10.0 kg/ Sq.m)
20
-
-
... More
Providing and fixing glazing in wooden/aluminium door, window, ventilator shutters and partitions etc with PVC/ neoprene gasket etc and making complete as per the architectural drawings and the directions of engineer in charge (Cost of aluminium snap beading shall be paid in basic item ) Make of glass Saint Gobin, ASAI, Modi Float or equivalent -With float glass panes of 5.5mm thickness (weight not less than 13.75 kg/ Sq.m)
30
-
-
... More
Providing and fixing Aluminium Composite Panels (ACP) made out of 4 mm thick (0.25+3.5+0.25) with LDPE core coloured, matt finished panels on both sides (total thickness of the panel shall be 4mm) of approved shade ACP Z-Green fixed with aluminium frame work 40mm x 20mm (Jindal section no. 14019/88) or equivalent approved including making openings for lighting fixtures, sealing joints with weather sealant, M.S. cleat, fastener, nut bolt with scaffolding etc. and making complete.
20
-
-
... More
Refixing the old aluminium partition in new position with all necessary modifications including necessary screws, wooden packing etc complete as directed
100
-
-
... More
Removing existing wooden frame/ Aluminium frame and stacking the same as and where directed within MDL premises etc complete or as directed.
100
-
-
... More
Removing and lowering down false ceiling from roof carefully and stacking the serviceable material within MDL premises and disposal of unserviceable material outside MDL premises etc complete as directed.
100
-
-
... More
Dismantling aluminium / wooden / Gypsum partitions, doors,/windows/ fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in MDL Premises as directed by Engineer-in-charge.
100
-
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS 6315 marked for doors including the cost of cutting floors as required, embedding in floors and cover plates with brass pivot and singoe piece MS sheet outer box with slide plate etc complete as per the directions of Engineer in Charge (Basic Cost of Double Action Floor Spring wih Stainless Steel cover plate is Rs. 2716 (DSR-2007,7394/pg335) and with brass cover plate is Rs. 3007(DSR-2007, 7396/pg 335)
-
-
-
... More
With Stainless steel cover plate min. 1.25 mm thick
10
-
-
... More
With brass cover plate min. 1.25 mm thick
10
-
-
... More
Providing and fixing shutter to wall cupboard made from 19 mm thick teak wood particle board one face with approved colour laminated face bonded with phenol formaldehyde synthetic resin B.W.P grade including lipping, beading, iron oxidised fixtures and fastenings and painting primer one coat etc complete as directed
50
-
-
... More
Modular False Ceiling : Armstrong Modular ceiling grid(hot dipped galvanized steel section) will have 595 x 595 mm x 15mm fine fissured tiles(lay-in type) in true horizontal level using a 15mm T bar section suspended from the ceiling slab using 2 mm wire at every 1200mm interval. And will have fire rating of 60 minutes as per BS 476/23 of 1987, Noise reduction Coefficient (NRC) of 0.50-0.60, to resist temperature and humidity conditions up to 40 degree (104deg. F) and humidity of 99% RH.
50
-
-
... More
Providing and pasting 3M or equivalent approved make frosted film on glazed portion of doors and partitions at locations as per detailed architectural drawing and as directed by engineer in charge
50
-
-
... More
Panelling: Providing & fixing Gypsum Board on partition and wall with GI screws at every 750mm c/c in vertical and horizontal directions to proper line, level including joints to be finished seamless with 48 mm wide self adhesive fibre tape.
50
-
-
... More
Providing & fixing flat pressed 3 layer particle board medium density exterior grade ( grade-I ) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid seperately)
-
-
-
... More
12 mm thick
50
-
-
... More
18 mm thick
50
-
-
... More
Providing and fixing venation vertical blinds revolving type having 100 % Polyester woven fabrics translucent type with 0.58 mm thickness and 100 mm width with Acrylic Coating resistant to Cracking & Fraying and of approved make etc compete as directed.
30
-
-
... More
Providing & fixing approved type of Roller Blinds with imported mechanism, approved make on
windows.(Basic cost of Rs. 1200/- Sqmt)
50
-
-
... More
Providing & fixing 19 mm thk Marine plywood shutter for storage below pantry finish with 1mm thk laminate on exposed surface . shutter edges should be finish with lipping patty with mathching pollish colour of laminate. One shelf to be provided below counter.All internal surface of plywood finish with 0.8mm thk off white laminate.Providing wooden framing of 2" x 1.5" finish with pollish of approve shade of laminate. Shutter will be fixed to the frame with approved SS hinges & necessory hardware like SS finish 4" high handel,magnet. etc. complete
20
-
-
... More
Providing & fixing MS ornamental grill of approved design weighing from 15 to 20 Kg / Sq.M. With necessary hold fast , complete with two coats of synthetic enamel paint of approved make & quality over a coat of approved anti corrosive yellow zinc chromate metal primer etc and making all complete
50
-
-
... More
Removing/refixing existing Door Shutters after repairing the existing door shutter by fixing 3mm Marine Ply on both the sides and finishing the surface with 1.5 mm thick formica on both the sides with fixtures made up of brass chrome plated like aldrop, 200 mm tadi, 200mm Tower Bolt, 150mm heavy duty steel hinges 4 Nos, door stoper, 200mm Handle 2 Nos. etc complete to the existing door.
20
-
-
... More
Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I , IS:3087 marked
50
-
-
... More
Providing and fixing North light glazing with wired glass 5 mm thick with aluminium frame as per drawing with all fixtures ( 2 mt. height) complete including fixing and scaffolding, etc.
10
-
-
... More
Refixing of existing door shutter including providing and fixing new anodized aluminium butt hinges of size 125 x 63 x 4mm, anodized aluminium handles of size 100mm with plate 150 x 32mm on both sides of door shutter, anodised aluminium sliding bolt 300 x 16mm with brass screws etc complete
10
-
-
... More
Providing and fixing SS Mosquito mesh in anodised (anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodising must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour) aluminium shutter fixed in sliding / openable / fixed windows conforming to IS:1948-1961 as per drawing and directed by Engineer In Charge. (Note: For Aluminum Sections, total weight shall be upto 3.5 kg/sq.m.)
20
-
-
... More
Providing & fixing SS signages out of 450X150mm and 6mm thick polycarbonate coloured back panel with2mm thick perforated SS plate with CNC cut with necessary hardware for fitting etc. complete as directed.
20
-
-
... More
Plywood panelling-VENEER Finishing: : 4mm thk approved veneer finished with imported PU coating on one side with matching superior grade fixed to the plywood having joints/grooves as shown or directed. With melamine polish. Thickness of top skin should be min. 0.4mm thick. (Basic rate of veneer Rs.2000/-SQ.M.)(Basic rate of PU Coating of Rs 150/-sqft
20
-
-
... More
Providing & fixing wallpaper of Approved make, shade & type including 12mm thick Gypsum board backingetc. complete. (Basic cost of wallpaper of Rs. 3000/- Sq.mt.)
20
-
-
... More
Plywood panelling-Skin : 12mm thick BWP Marine Plywood confirming to IS:710 on one side screwed to frame work with joints as shown or directed including Trims on all edges. (Basic Rate of plywood 975/-Sq.mt)
20
-
-
... More
19mm thick BWP Marine Plywood confirming to IS:710 on one side screwed to frame work with joints as shown or directed including Trims on all edges. (Basic Rate of plywood 1345/-Sq.mt)
20
-
-
... More
Removing and refixing existing door or window with frames and shutters, making good the damaged brick work and applying 3 coats of Syn. Ena. paint.
20
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead
20
-
-
... More
Dismantling carefully existing door / window shutters (steel or wood) including stacking within MDL premises etc. complete as directed.
-
-
-
... More
of area 3 Sq.M & below
20
-
-
... More
of area beyond 3 Sq.M.
20
-
-
... More
Road work
-
-
-
... More
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required on bituminous portion
1
-
-
... More
Excavation in earth including soft rock such as murrum up to 1:5 Meter depth and refilling the same after laying/replacing or removing pipes and disposal of the debris/surplus earth. cutting roads/ pavements
25
-
-
... More
Carriage of excavated earth/rubbish by mechanical transport including loading, unloading and carting away up to Municipal Dumping Ground.
45
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity including excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
1
-
-
... More
Soling 225 Thk :- Supplying, providing, and laying 225mm size trap stone Quarry rubble duly hand packed in compact layer at work site for soling to required camber and gradient including filling in the interstices with stone chips, spalls and oversize metal, etc. complete. Spreading approved hard murum or soil collected/ stacked during excavation, over the top of soling or oversize metal or size metal including watering, consolidation of soling (with oversize metal and hard murum) by 8-10 tonne roller until proper interlocking etc. complete.
25
-
-
... More
Water Bound Macadam 120mm Thk- Supplying, laying, spreading and compacing stone aggregate of 90 mm to 45mm size to WBM specification including spreading in uniform consolidated depth of 120 mm thick, hand packing , rolling with 3 wheeled road /vibrating roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening. binding material to fill up interstices of coarse agrregate watering and compacting to the required density as per standard specification and as directed by engineer.
1
-
-
... More
Scarifying metalled (water-bound) road surface including disposal of rubbish, lead upto 50 m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity.
1
-
-
... More
Tack coat on WBM- Providing and applying tack coat using hot straight run bitumen of grade 80/100 including heating bitumen, spraying the bitumen with hand/ mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specification on WBM /existing road@ 0.75 Kg/Sqm, etc. all complete as directed.
1
-
-
... More
Bituminous Macadam 75mm Thk-Providing and laying Bituminous Macadam on prepared surface ( on WBM) with 75mm average compacted thickness with bitumen of 60/70 grade@ 3.5% (percentage by weight of total mix) with graded crushed stone aggregate for profile corrective base /binder course including loading of aggregate with F.E. loader, hot mixing of stone aggregates and bitumen in hot mix plant, transporting the mixed material by tippers to pavers and laying the mixed material with pavers finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers 8-12Tonnes as per MORTH specification to achieve the desired density and compaction directed by Engineer.
1
-
-
... More
Tack coat on BM- Providing and applying tack coat using hot straight run bitumen of grade 80/100 including heating bitumen, spraying the bitumen with hand/ mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specification on WBM /existing road@ 0.50 Kg/Sqm, etc. all complete as directed.
1
-
-
... More
Asphalting Concrete 50mm Thk - Providing and laying Bituminous concrete on prepared surface ( on Bituminous Macadam) 40mm/50mm compacted average thickness with bitumen of 60/70 grade@ 5.5% and lime@ 3 %(percentage by weight of total mix) with stone aggregate for wearing course including loading of aggregate with F.E. loader, hot mixing of bitumen with filler and stone aggregates in hot mix plant, transporting the mixed material by tippers to paver and laying the mixed material with mechanical paver finisher fitted with electronic sensing device to the required level and grade and rolling with 8-12Tonnes as per MORTH specification to achieve the desired density and compaction as directed by engineer.
0.1
-
-
... More
Providing and applying 2-2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. ( Machine will be provided by MDL if available)
1
-
-
... More
PAVER BLOCKS : Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.200x100x60mm
20
-
-
... More
KERB STONE : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) 150wx300hx300L
1
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe
5
-
-
... More
Coolie or unskilled labour for carpentary work /man work or any othher work (8 hrs per day excluding lunch break)
200
-
-
... More
Supply of Stainless steel (Grade-304)hollow section round/square tubes for bollards, chain, name plates etc as per design and instruction of Engineer in Charge, complete.
1
-
-
... More
Supply, Printing, Lamination, transportation and Installation of Sinages on 3mm sunboard material as per design and instruction of Engineer in Charge, complete.
50
-
-
... More
Supply, Printing, Lamination, transportation and Installation of Sinages on 5mm sunboard material as per design and instruction of Engineer in Charge, complete.
5
-
-
... More
DESIGN MIX CONCRETE: Providing & laying in position machine batched, machine mixed & machine vibrated Design Mix M-30 Grade reinforced cement concrete Concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing & reinforcement, including admixtures in recommended proportions (as per IS 9103) to accelerate / retard setting of concrete improve workability without impairing strength and durability as etc; and making complete as directed@ using 340 kg of cement per cum of concrete
1
-
-
... More
Providing & fixing in position reinforcement bars including straightening, cutting, bending, placing in position & binding with binding wires / welding where ever necessary for slabs / beams / columns / footing/pile etc. and making all complete as directed at any location ( Lapping / chairs will be measured & paid ) -Thermo-Mechanically Treated bars
300
-
-
... More
Supplying, providing and laying dry stones pitching/ soling of 225mm thick including preparation of surface and making complete.
30
-
-
... More
PAINTING WORK
-
-
-
... More
Removing dry or oil bound distemper, enamel paints, water proofing cement paint and the like by scrapping, sand and preparing surface smooth including necessary repairs to scratches etc. complete.
80000
-
-
... More
Providing & applying with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces Two coats
1000
-
-
... More
Providing &applying instant mix of neeru plus cement for filling the undulation due to scraping, to make the surface smooth and in plumb and providing and applying wall care puttey 2mm thick of approved brand and manufacture(Birla JK, Nerolac, Asianwall past ) over finished surface to prepare the surface even and smooth including application of bonding coat of cement paste as well as pre-wetting, scaffolding, curing etc. complete as directed.
80000
-
-
... More
Providing and applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface( Sherwin-williams or Asian Paint / Nerolac / Berger or equivalent as approved by MDL) one coat over plaster before Putty
80000
-
-
... More
Providing and applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface (Sherwin-williams , or Asian Paint/Berger or equivalent as approved by MDL) One coat over putty before paint
80000
-
-
... More
Providing and applying ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works.
2000
-
-
... More
Providing and applying synthetic enamel paint/flat oil paint of approved brand and manufacture of required colour(Sherwin-williams, or Asian Paint/Berger or equivalent as approved by MDL) to give an even shade for doors,windows, fan, light filltings and walls etc: Two or more coats on old work.
5000
-
-
... More
Providing and applying two or more coats of Wall painting with plastic emulsion paint of approved brand and manufacture (Sherwin-williams, or Asian Paint/Nerolac/Berger as approved by MDL) to give an even shade
5000
-
-
... More
Providing and applying 1st quality acrylic washable distemper (ready made) of approved manufacturer (Sherwin-williams,or Asian Paint/Nerolac/Berger or equivalent as approved by MDL) and of required shade and colour complete. As per manufacturer’s specification. Two or more coats on old work.
5000
-
-
... More
Providing and applying French Polishing of approved brand and manufacture to the new or wood work in two coats including knotting, preparing the surface by scrapping, scaffolding etc. complete
50
-
-
... More
Providing and applying varnish of approved brand and manufacture to the oldor new woodwork including knotting,preparing the surface scrapping with sand paper,scaffolding etc. complete as directed.
100
-
-
... More
Providing and applying water proof(melamine) polishing of approved brand and manufacture to the woodwork etc. complete.
100
-
-
... More
Providing and applying two coats of white wash with lime to give an even shade including removing white or colour wash by scraping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as directed.
100
-
-
... More
Providing and applying Royale Luxury Emulsion of Asian / Berger / Nerolac / Dulux paint or eqivalent make on internal wall surface with emery paper and wiping clean for area. Applying Asian / Berger / Nerolac / Dulux or eqivalent wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20 % allowing to dry for 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulux or eqivalent wall putty with appropriate proportion of water of allowing to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean applying paints Royal Luxury emulsion 1st coat with brush water content water 40 to 45 % if applied by brush or 65 to 70 % if applied by roller by role . Applying paints Royal Luxury emulsion 2nd coat with brush water content water 40 to 45 % or 65 to 70 % by roller. (Excluding Scaffolding)
100
-
-
... More
Providing and applying Interior wall finish luster of Asian / Berger / Nerolac / Dulux paint or eqivalent make on internal wall surface as detail below. Scrapping the surface with emery paper and wiping it clean. Applying Asian / Berger / Nerolac / Dulux or eqivalent wall primer with brush with mineral turpentine of 8 to 10 % and oil 15 to 20 % with roller and allowing to dry for a period of 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulux or eqivalent Acrylic wall putty with appropriate proportion of water of allowing to dry for period of 4 to 6 hours. Wiping it scrapping with emery paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulux or eqivalent wall primer with brush with mineral turpentine 8 to 10 % and oil 15 to 20 % with roller scrapping with emery paper 320 and wiping it clean, applying Asian / Berger / Nerolac / Dulux or eqivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9 % and oil with roller 19 to 21 % after 8 hours of activity , applying 2nd coat of Asian / Berger / Nerolac / Dulux or eqivalent interior wall finish luster with mineral turpentine 7 to 9 % with brush and oil with roller 19 to 21 % with roller. (Excluding Scaffolding)
100
-
-
... More
Providing and applying External Raincoat painting with crack filling Pidilite Company Product Dr.Fixit Rain Coat acrylic polymer based chemical compound coatig to the extrnal surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade steiner to give required shade to the surface in two coats.Including providing three coats of priming of Dr.Fixit prime seal polymer base primer including preparing surface scrapping the existing loose old paint , removing loose particles of sand on the surface opening and cleaning the crack developed in the external plaster, removing loose partuicles by chiseling, filling cracks by chemical compound of Dr.fixit crack - X with proper penetration etc. Coating of Raincoat with the help of brush and as per instruction and specification given by pedilite and with instruction from Engineer in charge. Work shall be executed by certified applicator only covering guarantee of 3 years on court stamp paper of Rs 500 /-and necessary testing etc complete.
100
-
-
... More
Providing and applying Frenche Polishing to New wood work including knotting, preparing the surface, scaffolding etc complete as directed.
100
-
-
... More
Providing and applying Frenche Polishing for required finish on previously polished wood including lnotting, preparing the surface, scaffolding etc complete as directed.
100
-
-
... More
Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat , scaffolding if necessary , and watering the surface for two days etc complete.
50
-
-
... More
Providing and applying Luxury acrylic emulsion paints asian /ici / nerolac make of approved shade to surface as per manufacturer's specifications to wall & Gypsum Partition surfaces of approved make, colour including removing existing paint finishes & filling the dents with approved filler putty gypsum /or approved crack filler, binder, cleaning and making the surface dust free, preparing surfaces, applying a sealer or priming coat as per the manufacturer's specifications. Applying two under coats and one finished coat of paint to achieve the required finish as per the specifications etc. Including staging / scaffolding. Final coat should be finish with roller and complete as specified & directed by Engineer In charge. etc complete
50
-
-
... More
Providing and applying 3 coats of luster paint asian/ici/nerolac of aproved shade/make to surface as per manufacturer's specifications & including staging or scaffolding ,preparing the surface with one coat of primer on ceiling etc.final coat should be finish with roller and complete as specified & directed. This work includes removing existing paint finishes & filling the dents with approved filler putty gypsum /or approved crack filler,binder,cleaning and making the surface dust free,preparing surfaces,applying a sealer or primimng coat as per the manufacturer's specifications,applying two under coats and one finished coat of paint to achieve the required finish as per the specifications etc.complete
50
-
-
... More
P & A OIKOS texture paint & approved design paint Paint Shade Imperial, Spiral effect, Ragging-
30
-
-
... More
Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.
50
-
-
... More
Asian Paint smart Care Hydrolock -dampness of all internal wall :
Provide & Apply Asian Paint samrtCare Hydrolock (Or Equivalent) on all surfaces as follows:
1. Surface Preparation 2. Removing existing existing putty and effloresces with brush 3.Apply two coats smart care Hydolock with forced coverage 40-45 ssq/ft/litere. After first coat has completely dried(5 to 6 hours or as per ambient conditions), The contractor should submit covering guarranty of 3 years on court stamp of Rs.500. The work should be carried out by certified applicator of Asian Paint manufacture.
500
-
-
... More
Providing and applying one coats of Wall painting with plastic emulsion paint of approved brand and manufacture (Sherwin-williams, or Asian Paint/Nerolac/Berger as approved by MDL) to give an even shade
5000
-
-
... More
SANITARY FITTINGS
-
-
-
... More
Providing and fixing white glazed vitreous china flat back urinal of half stall of size 580mm * 380mm * 350mm with white PVC automatic flushing cistern Parryware/ Hindware/Cera including with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in CP brass) with wate fittings, C.I trap with outlet grating and other couplings in CP brass, brackets including painting of fittings and cutting & making good the walls and floors wherever required etc. complete as directed. All fittings to have ISI mark.
-
-
-
... More
Range of two half stall urinals with 5 litres PVC automatic flushing cistern
10
-
-
... More
Range of three half stall urinals with 10 litres PVC automatic flushing cistern
5
-
-
... More
Dismantling wash basin, sink etc. including waste fittings, brackets etc and depositing the same as directed.
20
-
-
... More
Carefully dismantling the existing wash basin with all it's fitting and refixing the same with it's fitting; all complete.
25
-
-
... More
Providing and fixing white vitreous china wash basin including 32 mm dia CP waste coupling, CI bracket painted white including dismantling the old and damaged one if any, depositing the same as directed Size 630 mm x 450 mm (Approx.)(Hindware/Parryware /Cera make)
1
-
-
... More
Providing and fixing white vitreous china wash basin including 32 mm dia CP wate coupling, CI bracket painted white including dismantling the old and damaged one if any, depositing the same as directed Size 550 mm x 400 mm (Approx.)(Hindware/Parryware /Cera make)
40
-
-
... More
Providing and fixing in position approved white vitreous china pedestal type water closet pan with ISI mark (EWC) (Parryware, Hindware or any other approved make & colour ) with ISI marked white solid plastic seat and lid with all fittings and fixtures including cutting and making good the same, making inlet and outlet connections etc. complete including fittings / connectors ;complete as directed.(Excluding Flushing Cistern)
60
-
-
... More
Providing and fixing in position approved white glazed Orrisa pattern water closet pan with ISI mark (Parryware, Hindware or any other approved make & colour) 580mm x 440mm with integral type foot rests 100mm dia sand cast iron P or S Trap including breaking walls, floor and making good the same, making inlet and outlet connections etc. complete including fittings / connectors ;complete as directed.(Excluding Flushing Cistern)
30
-
-
... More
Providing and fixing in position Stainless steel kitchen sink without drain board A ISI 304 (18/8) as per IS 13983 610mm x 510mm depth 200mm with cast iron brackets and stainless steel plug 40mm including painting of fittings and brackets, including cutting and making good the walls, making inlet and outlet connections etc. complete as directed.
10
-
-
... More
Removing wherever required and refixing pedestal type water closet with all its connections with fresh water proof joints.
35
-
-
... More
Providing and fixing plastic seat and cover with lid for pedestal type WC pan with CP brass hinges rubber buffers etc;complete. Black plastic seat and cover WC pan
1
-
-
... More
Providing and fixing plastic seat and cover with lid for pedestal type WC pan with CP brass hinges rubber buffers etc;complete. White plastic seat and cover WC pan
60
-
-
... More
Providing and fixing plastic seat and cover with lid for pedestal type WC pan with CP brass hinges rubber buffers etc;complete. Only CP brass hinges with rubber buffers
5
-
-
... More
Repairing flushing tank by adjusting float valves, lever-arm or by refit siphon bells in proper positions and refixing to stop the leakages; complete.
60
-
-
... More
Providing and fixing/replacing flushing tank siphon bell including dismantling the old and damaged one if any and depositing the same as directed. for PVC (high or low level) flush tanks.
15
-
-
... More
Repairing and replacing siphon washer for the low level/high level flushing tank; complete.
15
-
-
... More
Providing and fixing flush tank handles including the removal of old and damaged one if any and depositing the same as directed. CP flush tank handles(Hindware/ Cera/ Perryware )
5
-
-
... More
Providing and fixing flush tank handles including the removal of old and damaged one if any and depositing the same as directed. PVC flush tank handles
20
-
-
... More
Removing wherever required and refixing flushing cistern with all its connection with fresh water proof joints. Low level flushing cistern.
30
-
-
... More
Removing wherever required and refixing flushing cistern with all its connection with fresh water proof joints. High level flushing cistern.
20
-
-
... More
Providing and fixing 10 Ltr. low level flushing cistern of approved make with all integrated fittings such as lead valve, siphon, pvc connector, brackets etc. and PVC/ CP brass handle; all complete. PVC ((Hindware/ Cera/ Perryware )
60
-
-
... More
Providing and fixing 10 Ltr. high level flushing cistern of approved make with integral fittings such as ball valve, ball, lever, handle, pvc connector, outlet flexible pipe, brackets etc; all complete. PVC (Hindware/ Cera/ Perryware )
45
-
-
... More
Providing & fixing CP Soap Dish of of Jaquar make (code : AKB - 35731) with material & labour etc.complete
30
-
-
... More
Providing and fixing towel Rack /towel Hanger /steel towel holder (39X12X17) 3 hooks (stainless Steel) Goldline/gravity or approved Make , model no. Single Hook self complete etc complete as per the direction of Engineer in Charge. (The fixture if any to be paid seperately)
50
-
-
... More
Providing and fixing Over head shower of JAQUAR make, model no.OHS-1819, size 200 x 200 mm square shape single flow ( shower body & Face Plate of Brass Chrome plated) with Rubit Cleaning system all complete & as directed by Engineer / Architect
14
-
-
... More
Providing and fixing JAQUAR QQT-7273UPR wall mixture with provision for Overhead Shower with 115mm long bend pipe on Upper Side,Connecting Legs & etc. complete as per the direction of Engineer In Charge
14
-
-
... More
Providing and fixing Soap Dispenser of Jaquar make (code : AKB - 35735) etc all complete & as directed by Engineer / Architect
15
-
-
... More
Providing & fixing CP Towel Ring of Jaquar make (code : AKB-35721) etc.all complete & as directed by Engineer / Architect
50
-
-
... More
Providing & fixing CP Toilet Roll Holder of Jaquar make (code : AKB - 35753) with flap of Jaquar etc.all complete & as directed by Engineer / Architect
5
-
-
... More
Providing & fixing Washbasin of "Jaquar" make, model no.CNS-WHT-WB05 etc. complete and as directed by Engineer Incharge.(for Common toilets). (All fixtures to be paid seperately.)
10
-
-
... More
Providing & fixing of new aprox.size 495 x 365 x 160 mm glazed vitreous earthernware Wash Basin (counter-top mounted)of aproved Jaquar make code : SLS-WHT-0558 cutting counter top,drilling holes in the walls & making good the damages etc. Complete as per the direction of the architect.
5
-
-
... More
Providing & fixing of new wall type glazed earthnwear flat back urinals of Jaquar make code: URS-WHT-0702 including, CI bracket with auto closing concealed urinal flush valve with wall flange code : PRS -073 button valve with regulator , cp brass flush pipe with cp clamp & screws , CP spreader , waste coupling , 32mm dia cp brass bottle trap and pipe to wall cp flange all of Jaquar make including Cutting , grooving , making the good walls & floor etc. all complete & as directed by Engineer / Architect
2
-
-
... More
Providing & fixing Kitchen Sink Tap/ Cock - Jaguar - 5357 N etc.all complete & as directed by Engineer / Architect.
5
-
-
... More
Providing and fixing Conceal Cistern Jaquar make code : CIB-WHT-31801011kfd the details of the concealed portion of the cistern with slim body, floor mounting frame, drain pipe kit and installation with control plate white code : CIS-CHR-312040219/ chrome finish as approved by architect/ bank engineer
3
-
-
... More
Providing and fixing white glazed vitreous china flat back urinal of half stall of size 580mm * 380mm * 350mm with white PVC automatic flushing cistern Parryware/ Hindware or equivalent including with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in CP brass) with wate fittings, C.I trap with outlet grating and other couplings in CP brass, brackets including painting of fittings and cutting & making good the walls and floors wherever required etc. complete as directed. All fittings to have ISI mark. -Single half stall urinal with 5 litres PVC automatic flushing cistern
10
-
-
... More
Providing and fixing partition for urinals of approved parryware or equivalent manufacture etc complete
10
-
-
... More
Providing and fixing mirror rectangular shape 1500 x 450 mm size (outer dimentions) with plastic moulded frame of make Saint Gobain and shade with 6mm thick hard board backing etc. all complete
30
-
-
... More
Providing and fixing 600*450mm bevelled edge mirror of superior glass (of approved quality) of make Modifloat/Saint Gobin with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete
50
-
-
... More
Providing and fixing in position white vitreous china pedestal type water closet (European type) single piece with integrated cistern of "Jaquar" make model no. LYS-WHT-0204/or upgraded version of Jaquar make of size 755x365x655 (mm) with seat and lid, integrated flushing cisten with manually controlled device (push type flush valve), with all fittings and fixtures complete including cutting and making good the walls and floors wherever required etc all complete & as directed by Engineer / Architect
10
-
-
... More
Providing and fixing two in one Bibcock of JAQUAR, model no. LYR-38041 or upgraded version including fixing the same with tafflon tape and necessary concealed fitting arrangement etc. all complete & as directed by Engineer / Architect
15
-
-
... More
Providing and fixing towel Rack with Lower Hanger of JAQUAR make, model no. AHS-1581H or upgraded version complete etc complete as per the direction of Engineer in Charge. (The fixture if any to be paid seperately)
5
-
-
... More
Removing carefully existing Urinals with frame including disconnecting the sanitary and water supply connections, removing the same carefully and taking away the same outside MDL premises etc all complete
5
-
-
... More
Providing & fixing 100mm dia half round white glazed earthenware urinal channel laid in 1:5:10 cement concrete including bends, giving necessary slope, pointing with white cement etc. complete as directed.
5
-
-
... More
Removing carefully existing Urinal partitions (stone work) and taking away the same outside MDL premises etc. all complete as directed.
5
-
-
... More
Providing and fixing Oval type white vitreous glazed counter type wash basin (HINDWARE/HINDUSTAN/PERRYWARE MAKE) of size 24" x 16" including cutting of Platform top fixing to match the plate form level and proper slope with required brick work and cement work.
12
-
-
... More
Providing CI brackets including cutting of walls, fixing and grouting and removal of old damaged one if any, complete including painting etc. For Kitchen Sink or wash basins etc.
2
-
-
... More
P & F wall mixer Jaquar- Providing and fixing wall mixer 3-in-1 system (3-way) with provision of both the telephonic shower and overhead shower complete with 115 mm long bend pipe and wall flanges; all complete as directed. Jaquar Continental make3-in-1 wall mixer (Cat No. 281)
15
-
-
... More
P & F wall mixer Providing and fixing wall mixer 3-in-1 system (3-way) with provision of both the telephonic shower and overhead shower complete with 115 mm long bend pipe and wall flanges; all complete as directed.
40
-
-
... More
P & F hand shower Jaquar Providing and fixing Hand shower (SBS Chrome plated) with Rubbit Cleansing system with 1.50 meter pvc tube and wall hooks; all compete as directed. Jaquar Continental make Hand shower (Cat No.970)
15
-
-
... More
P & F hand shower -Providing and fixing Hand shower (SBS Chrome plated) with Rubbit Cleansing system with 1.50 meter pvc tube and wall hooks; all compete as directed. Hand shower
175
-
-
... More
P & F swan neck pillar cock / tap Jaquar -Providing and fixing Swan neck pillar cock/tap with right hand or left hand operating knob for counter type wash basin including making hole in counter slab; all complete as directed. Jaquar Continental make Pillar cock (Cat No.123 or 124)
40
-
-
... More
P & F swan neck pillar - Providing and fixing Swan neck pillar cock/tap with right hand or left hand operating knob for counter type wash basin including making hole in counter slab; all complete as directed.
15
-
-
... More
Providing Fixing Jaquar Seat cover or equivalnt for existing WC
50
-
-
... More
Providing & fixing new candle for Water purified machine's as a filter (as per machine make )
50
-
-
... More
Providing servises for repair & maintainance of Gas Stove/water filter periodically in residencial building MDL
50
-
-
... More
Uni-installation of solar plant on existing roof shed (as& reinsatallation from the roof sheet work
5000
-
-
... More
Rolling shutter repair & Collapsable door
-
-
-
... More
Preventative Maintenance/ Servicing of Push/pull type, Hand/Chain type, Motor Operated type rolling shutters, of any size, throughly cleaning, oiling greasing all the components, adjusting the tension spring, inspecting/repairing shaft & gear units, bears, realigning the chain, ensuring proper locking system, including all welding, drilling, straightening, grinding, ladders, tools, tackles, with all consumables, such as lubricants, kerosene, grease etc, and all hardwares such as screws, washers, keys, etc inspecting the defectives parts and replacing the same with the permission of EIC/User dept and demonstrating proper functioning of the shutter after each service, including red oxide and Aluminium painting One or more coat to get even shade to MS parts by scraping old paint if required all complete excluding scaffolding as per direction of EIC. BRC four times services = 4 Nosx 750 Sqm = 3000 Sqm Note : Measurement for rolling shutters will be clear opening only excluding Guide, Hood, shaft.
500
-
-
... More
Providing and applying painting with aluminium paint of approved brand and manufacture to give an even shade:
Two or more coats on old work & preparing the surface by scrapping existing paint
500
-
-
... More
Removing of Existing rolling shutters Push/pull type, Hand/Chain type, Motor Operated type etc, stacking at designated places as directed by EIC, including repair of damage portion if any by cement concrete/plaster if any and making the surface good for fixing rolling shutters. The Shutters unserviceable materials should be cut into pieces of less than one meter. All complete.
Note : Measurement for rolling shutters will be clear opening only excluding Guide, Hood, shaft.
100
-
-
... More
Shutter Sizes Till ( 3m*3m) : Supply and Installation of Motorized rolling shutter , 125 MM 19G ( 1.0 MM ) GI ( Jindal Make ) Shutter strips , 12G ( 2.5MM )Locking bottom with 35*35*4 MM Angle of sturdiness , 12G ( 2.5MM )Side guide with Min 75 MM width , 12G ( 2.5 MM ) Brackets Plates , 5.5" Dia. suspension pipe shaft of B Class ( 4.5 MM Thickness ) , GI top cover of 0.80 MM Thickness only for motor , Two coat Grey / Zinc Primer to MS Parts and limit switch. Complete Excluding Cost of Motor.
20
-
-
... More
Shutter Sizes Till ( 4.7m * 4.7m ) : Supply and Installation of Motorized rolling shutter , 125 MM 19G ( 1.0 MM ) GI ( Jindal Make )Shutter strips , 12G ( 2.5 MM )Locking bottom with 35*35*4 MM Angle of sturdiness , 12G ( 2.5 MM )Side guide with Min 100 MM width , 12G ( 2.5 MM ) Brackets Plates , 5.5" Dia suspension pipe shaft of B Class ( 4.5 MM Thickness ) , GI top cover of 0.80 MM Thickness only for motor , Two coat Grey / Zinc Primer to MS Parts. Complete Excluding Cost of Motor.
30
-
-
... More
Shutter Sizes Till ( 5.5m * 5.5m ) : Supply and Installation of Motorized rolling shutter , 125 MM 19G ( 1.0 MM ) GI ( Jindal Make )Shutter strips , 12G ( 2.5 MM ) Locking bottom with 35*35*4 MM Angle of sturdiness , 12G ( 2.5 MM )Side guide with Min 150 MM width , 12G ( 2.5 MM ) Brackets Plates , 6" Dia suspension pipe shaft of B Class ( 4.5 MM Thickness ) , GI top cover of 0.80 MM Thickness only for motor , Two coat Grey / Zinc Primer to MS Parts and limit switch. Complete Excluding Cost of Motor.
70
-
-
... More
Shutter Sizes Till ( 6.5m * 6.5m ) : Supply and Installation of Motorized rolling shutter , 125 MM 19G ( 1.0 MM ) GI ( Jindal Make )Shutter strips , 12G ( 2.5 MM ) Locking bottom with 35*35*4 MM Angle of sturdiness , 12G ( 2.5 MM )Side guide with Min 150 MM width , 12G ( 2.5 MM ) Brackets Plates , 6" Dia suspension pipe shaft of B Class ( 4.5 MM Thickness ) , GI top cover of 0.80 MM Thickness only for motor , Two coat Grey / Zinc Primer to MS Parts and limit switch. Complete Excluding Cost of Motor.
45
-
-
... More
Shutter Sizes above 6.5m till 10m : Providing Motorized rolling shutter , 125 MM 19G ( 1.0 MM ) GI ( Jindal Make )Shutter strips , 12G ( 2.5 MM ) Locking bottom with 35*35*4 MM Angle of sturdiness , 10G ( 3.00 MM ) Side guide with Min 200 MM width , 12G ( 2.5 MM ) Brackets Plates , 8" Dia suspension pipe shaft of B Class ( 4.5 MM Thickness ) , GI top cover of 0.80 MM Thickness only for motor , Two coat Grey / Zinc Primer to MS Parts and limit switch. Complete Excluding Cost of Motor.
100
-
-
... More
Motor for (3mx3m till 4.7mx4.7m opening) : Supply and Installation of In Direct Drive , Jielong, Stornglife or equivalent Brand Motor Made in China Model ECR 600 Single phase with inbuilt electro brake , "OPEN , STOP , CLOSE " Push button to operate the shutter , chain to operate the shutter when light fails . ( 412 NM , 230 V ), including remote two nos and One (1 Year ) Warranty against any manufacturing defects from date of Installation of shutter, Complete.
5
-
-
... More
Motor for ( 5.5mx5.5m opening) :Supply and Installation of In Direct Drive , Jielong, Stornglife or equivalent Brand Motor Made in China Model ECR 1000 Single phase with inbuilt electro brake , "OPEN , STOP , CLOSE " Push button to operate the shutter , chain to operate the shutter when light fails . ( 809 NM , 230 V ), including remote two nos and One (1 Year ) Warranty against any manufacturing defects from date of Installation of shutter, Complete.
4
-
-
... More
Motor for (6.5mx6.5m opening) : Supply and Installation of In Direct Drive , Jielong, Strong life or equivalent Brand Motor Made in China Model ECR 1500 Single phase with inbuilt electro brake , "OPEN , STOP , CLOSE " Push button to operate the shutter , chain to operate the shutter when light fails . ( 1617 NM , 230 V ), including remote two nos. and One (1 Year ) Warranty against any manufacturing defects from date of Installation of shutter, Complete.
1
-
-
... More
Motor for (6.5m till 10m Opening and above) : Supply and Installation of In Direct Drive , Jielong, Strong life or equivalent Brand Motor Made in China Model ECR 2000 Three phase with inbuilt electro brake , "OPEN , STOP , CLOSE " Push button to operate the shutter , chain to operate the shutter when light fails . ( 2450 NM , 380 V ), including remote two nos. and One (1 Year ) Warranty against any manufacturing defects from date of Installation of shutter, Complete.
2
-
-
... More
Repair of In Direct Drive/ direct drive any brand Motor after completion of one year Guarantee period including winding etc, complete. For Existing old motors, in case of any fault, the same to be handover to CMS for repair.
10
-
-
... More
Repair of sheet/monsoon season repair
-
-
-
... More
Applying two coats of bitumen hot or cold and one layer of Hessian based bitumen felt as a leak proof treatment on the existing AC sheets / RCC roofs cracked at the ridge portion and sloping part and also nut and bolt holes provided along with the joints isolated cracks and patch repairs of identical nature including necessary cleaning of the surfaces, scaffolding with all lifts and leads, all complete. Note: Tarfelt and Bitumen will be supplied by MDL
50
-
-
... More
Applying Two coat of hot bitumen layer without Hessian based bitumen felt as a leak proof treatment on the existing AC sheets / RCC roofs cracked at the ridge portion and sloping part and also nut and bolt holes provided along the joints and isolated cracks and patch repairs of identical nature including necessary cleaning of surfaces prior to bitumen application, scaffolding with all lifts and leads, all complete as directed. Note: Bitumen will be supplied by MDL
50
-
-
... More
Cleaning of MS/GI roofs, eve valley gutters upto 350mm periphery of round rectangular section manually with broom etc all complete as directed.
Note: Rates should be inclusive of take away debris from MDL premises to Municiple dumping ground.
1000
-
-
... More
Cleaning of MS/GI roofs, eve valley gutters 350mm to 600mm periphery of round rectangular section manually with broom etc all complete as directed.
Note: Rates should be inclusive of take away debris from MDL premises to Municiple dumping ground.
500
-
-
... More
Cleaning of grass, tree leafs, bituminous old tarfelt of MS/GI/Galvalume/AC roofs, roof slab , terrace slab, balcony, chajja etc manually with broom etc all complete as directed.
Note: Rates should be inclusive of take away unservicable materials from MDL premises to Municiple dumping ground.
1000
-
-
... More
Supply and applying M-Seal Chemical or bituminous sealing sheets having one side aluminium foil of size 50x50mm size for sealing holes as directed.
500
-
-
... More
Labour Charges for Dismantling or Fixing carefully AC /Gl roofing sheets, Polycarbonate sheets, U cladding/North light glasses including ridges, hips, valleys, gutters, coal tar etc. and stacking the serviceable materials within 100 m lead including necessary screws and washers all complete as directed. (Sheets will be provided by MDL for fixing)
Note: Rates should be inclusive of take away unserviceable material from MDL premises to Municiple dumping ground.
500
-
-
... More
Providing & fixing PVC Rain water pipes conforming to I.S.13592-1992 including proper rain water receiving recess with PVC plug bend, necessary fittings such as offsets, shoes including fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall and fixing with clips of approved quality and number, filling the joints using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocation of pipes.
-
-
-
... More
75 mm outer dia. PVC pipe.
50
-
-
... More
110 mm outer dia. PVC pipe.
50
-
-
... More
160 mm dia. PVC pipe.
50
-
-
... More
Dismantling carefully existing broken glasses and providing & fixing new 6mm thick wired glass for North Light with putty and nails, wherever necessary including cutting of glass etc. complete all as directed.
50
-
-
... More
Removing the north light glasses and re-fixing the same after cleaning and cutting to the required size with neatly putted to the glazing frame
50
-
-
... More
Dismantling GI/Galvalume Sheet roofing upto 10mm thick including ridges, hips, valleys and gutter and stacking the serviceable materials within MDL premises and disposal of un-serviceable material outside MDL premises at Municipal Dumping ground etc complete as directed.
100
-
-
... More
Dismantling Asbestos Sheet roofing including ridges, hips, valleys and gutter and stacking the serviceable materials within 50m lead and disposal of un-serviceable material outside MDL premises at Municipal Dumping ground
50
-
-
... More
Fixing corrugated G.S./G.I/Galvalume sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), including cutting to size and shape wherever required.
50
-
-
... More
Providing and Fixing GI jali of size 50 x 50mm and 3 mm thick alongwith accessories in work shops. Providing and fixing G.I. wire of dia. 4 mm, PVC coated fabric to achieve outer dia not less than 5 mm in required colour and shade of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers and 25x5mm MS flat patti framing to protect below polycarbonate sheets or other locations as required complete as per the direction of Engineer-in-charge.
50
-
-
... More
Fixing ridges or hips of width 60 cm overall width plain G.S/G.I/ Galvalume sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.
50
-
-
... More
Fixing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.
50
-
-
... More
Providing and Fixing approved fibre glass roof sheet (clear area of the ventilated portion shall be paid without taking the laps into account), complete as per manufacturer's specifications, thickness of sheet 1.2 mm.
50
-
-
... More
Providing and fixing Plain Coloured Fibre Glass corrugated roof sheet 2mm thick for weather shed 0.75 wide using 40mm X 40mm X 5mm M.S. Angle as brackets and purlin of size 25mm X 25mm X 5mm with painting and cement vata etc. complete.
25
-
-
... More
Providing & fixing 6mm thk Polycarbonate sheets hallow brick type in chajja including hardware 8mm dia G.I bolts & nuts, G.I plain & bitumin washers, making waterproof vata etc. complete as directed. (Refer TS36)
25
-
-
... More
Providing and fixing precoated galvanised iron profile sheets of JSW,Jindal,Tata Manufacture (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
300
-
-
... More
Providing and fixing of 2mm thick Polycarbonate Translucent Sheets for roof, North Light and Cladding etc. to match with existing profile of galvalume roofing sheets including lapping, transportation, labour, wastage complete with hardwares, etc. all complete. (Only Open area covered by sheeting will be measured considering overlapping of minimum 150mm.)
100
-
-
... More
Providing and fixing 3 mm thick translucent corrugated Fibre Glass Reinforced Polyester (FRP) Sheeting profile to match with sheeting including fixing in sloping roof with G.I. 'J' or 'L' hook bolts, G.I. Square nuts, 25mm dia x 1.59mm thick flat washers, 25mm dia x 3.18mm thick bitumen washers, necessary lapping etc at all heights. The area of FRP sheeting including Laping as fixed in position will be measured. Rates shall include all fixtures and fastenings.
10
-
-
... More
Providing and fixing 80cm overall trapezoidal 2mm thick Aluminium gutter as per existing gutter section, with MS (GI) brackets 40x5mm/50x5mm size, including bending, cutting, welding, hoisting, fixing in position with bolts, nuts and washers etc. all complete as directed.
100
-
-
... More
Design, Supply & Fixing of GI Colour Coated Accessories of 0.70 mm TCT of suitable required size, shape ie Ridges, North light curves, Apron Flashing, Gable end Flashing, Corner pieces, Eaves Flashing, with complete hardware including overlap, wastage etc. complete. Material specification is same as per Roofing Sheets
50
-
-
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete
-
-
-
... More
Ridges plain (500 - 600mm)
10
-
-
... More
Flashings/ Aprons.( Upto 600 mm)
10
-
-
... More
North light curves
10
-
-
... More
Barge board (Upto 300 mm)
10
-
-
... More
Crimp curve
10
-
-
... More
Gutter .(600 mm over all girth)
10
-
-
... More
Providing and fixing 15cm wide, 45cm overall semi circular plain GS sheet gutter with iron brackets 40x3mm size, including bending, cutting, lding, hoisting, fixing in position with bolts, nuts and washers etc. and making necessary connections with rain water pipes complete --
0.8mm thick with zinc coating not less than 275 gm/m2
50
-
-
... More
Providing and fixing Structural steel work riveted, bolted or welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as directed by engineer.
1500
-
-
... More
Providing and erecting bamboo's double scaffolding of required height and width and strength by sides of building for platform to enable workmen to carry out repairs to building at any level from ground to any floor height as directed including removing the same and clearing the site. ( The rate for this item will be applicable for work beyond 10 m height for building / shed / workshop since all the items of work are inclusive of scaffolding upto 10 M height)
1000
-
-
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.
500
-
-
... More
Providing and fixing Precoated Galvalume plain sheets (size, shape as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with Galvalume high tensile cold rolled steel as per AS1397, coating classAZ150 (min. 150 gsm/m2 zinc - aluminum alloy coating mass, total on both sides), 550 Mpa yield strength. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
100
-
-
... More
Providing and fixing Precoated Galvalume plain sheets accessories (size, shape as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with Galvalume high tensile cold rolled steel as per AS1397, coating classAZ150 (min. 150 gsm/m2 zinc - aluminum alloy coating mass, total on both sides), 550 Mpa yield strength. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete :Ridges plain (500 - 600mm)
10
-
-
... More
Providing and fixing Precoated Galvalume plain sheets accessories (size, shape as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with Galvalume high tensile cold rolled steel as per AS1397, coating classAZ150 (min. 150 gsm/m2 zinc - aluminum alloy coating mass, total on both sides), 550 Mpa yield strength. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete : Gutter .(600 mm over all girth)
20
-
-
... More
Providing and fixing Alluminium grill/jali of heavy type opening and 10 mm thick og approved quality and design to windows and ventilators including providing alluminium F partti weighing 0.22 Kg/Rmt etc complete as per approved drawing or as directed by Engineer In charge.
-100 X 110 mm weighing 2.10 Kg/smt
50
-
-
... More
Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
200
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter. The rates are inclusive of coupler, bends, shoe, holding clips etc. complete
25
-
-
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required including removal of existing damage chainlink fencing if any. Complete as per the direction of Engineer-in-charge.
5
-
-
... More
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
5
-
-
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40Xx40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles including applying a priming coat of approved steel primer.
30
-
-
... More
Providing and fixing Foundation bolts including nuts and washers complete
5
-
-
... More
Providing M 20 x 260 mm long anchor bolts, including making holes to base plate and RCC and fixing the same with washer, all complete as directed.
5
-
-
... More
Providing and fixing 1mm thick MS sheet sliding shutters with frame and diagonal braces of 40*40*6mm angle iron, 3mm MS gusset plates at the junction and corners 25mm dia pulley, 40*40*6mm angle and T- iron guide at the top and bottom respectively including applying a priming coat of approved steel primer) complete as directed
10
-
-
... More
Providing and fixing partition for urinals of approved parryware or equivalent manufacture etc complete
10
-
-
... More
Providing and fixing 15 mm dia push cock ( self closing tap) symet type including necessary socket, testing etc, complete
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements