Mahatma Gandhi Institute Of Medical Sciences Tender

Dismantling A.C. Sheet false ceiling with frame work including stacking the materials as directed with all leads, lifts etc. complete.

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Removing doors and windows with frames/ without frame and stacking the materials as directed with all leads, lifts etc. complete.

Removing cement or lime plaster including disposing of the spoils as directed with all leads, lifts etc. complete.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm to 20cm including watering and compaction etc. complete.

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS3395:1997 below concret pavement including all materials and labour complete.

Providing and laying Cast in situ/Ready Mix cement concretein M15 of trap/granite/quartzite/gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, plywood/steel formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering unevenand honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.(Wooden centering will not be allowed.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batchmix plant (Panmixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing fly ash brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.

Providing and fixing mild steel grill work for windows, ventilators etc. 20kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Providing and fixing M.S. grill door 24kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc

Providing and fixing in position. (as per I.S.1868/1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension? 63.50x38.10x1.02mm at weight 0.547kg/Rmt. and window frame bottom track section 61.85x 31.75x1.20mm at weight 0.695kg/Rmt. Top and side track section 61.85x31.75x1.30mm at weight 0.659kg/Rmt. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417kg/Rmt. Interlocking section 40x18x1.10mm at weight 0.469kg/Rmt. And handle section 40x18x1.25mm at weight 0.417kg/Rmt. and top section 40x18x1.25mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed byEngineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted invertical section of shutter including 5mm thick plain glass with all required screw sand nuts etc, complete. With powder coating without box

Providing and fixing fly proof mesh in stainless steel jali (304 grade) to ventilator/window using standered aluminium members of size 45x22mm for frame work and U channels for support and fixing fly proof mesh on it and all labour charges including all fixture and fastenings etc. complete. as directed by engineer incharge.

Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. b) Granite

Providing and laying vitrified tiles having size 590mm to 605mm x5 90mm to 605mm of 8 to 10mm thickness and confirming to IS. 156222006 (groupBla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring

Providing and laying vitrified mirror/glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS.15622-2006 (groupBla)of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints ,curing and clearing etc.complete. b) Skirting

Labour charges for refixing of existing available CTW door frame including providing and fixing hold fasts and necessary repairig work etc. complete.

Providing and fixing solid core flush door shutter in single leaf/double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, moulding sandlipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handle son both sides, and finishing with French Polish etc. complete.

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted /bolted/welded connections without connecting plates, braces etc.and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and fixing of approved make PVC false ceiling on M.S.Rectangular hollow section 18mm x 38mm 18 swg fixed to wall with PVC roll plugs and duly main runner &intermediate section of M.S. squar tube 25mmx25mm duly coated with anti corrosive primer & ceiling panel made out of ridge PVC multichamber hollow section of size 80 x250mm joined with concealed screws fixed on structure and no frame elements is visible from outside including suspenders and remaking damaged surface etc. complete.As directed Engineer -in-charge.

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

Charges for providing and supporting props support to the trussess/ I Beams for vertical support of height 3mtr to 5mtr height including fixing in position properly with bottom and top support for required working period and removing the same after working period completed oncluding all labour scaffolding treatment etc. complete.

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary

Scraping out old white wash/colour wash / distemper by, brushing and or scraping by sand paper and preparing the wall surface smooth including necessary repairs to scratches etc. complete. Spec.No.: As directed by Engineer- in-charge

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying Two coats of wall care Putty (Asian/ Birla wall care) on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Providing and applying Royale Luxury Emulsion of Asian / Berger / Nerolac / Dulex Paints of approved quality colour and shade to new surface in three coats including scaffolding preparing the surface (excluding primer coat ) etc complete.